[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw09 started "build _service:gbs:perl-Test-Pod-Coverage.spec" at Tue Apr 2 11:34:50 UTC 2019. [ 0s] [ 0s] Building perl-Test-Pod-Coverage for project 'Tizen:Base' repository 'standard' arch 'armv7l' srcmd5 '40fefdc964361621996d9ef229393a75' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:perl-Test-Pod-Coverage.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling libgcc... [ 2s] [7/40] preinstalling bash... [ 2s] [8/40] preinstalling diffutils... [ 2s] [9/40] preinstalling grep... [ 2s] [10/40] preinstalling libattr... [ 2s] [11/40] preinstalling libbz2... [ 2s] [12/40] preinstalling libcap... [ 2s] [13/40] preinstalling libelf... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [27/40] preinstalling coreutils... [ 8s] [28/40] preinstalling libacl... [ 8s] [29/40] preinstalling libblkid... [ 8s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/96] installing libmagic-data-5.36-15.5 [ 9s] [2/96] installing setup-0.9-9.9 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [3/96] installing filesystem-3.1-8.1 [ 9s] [4/96] installing glibc-2.24-13.37 [ 10s] [5/96] installing libatomic-6.2.1-33.2 [ 11s] [6/96] installing libgcc-6.2.1-33.2 [ 11s] [7/96] installing bash-3.2.57-6.3 [ 12s] [8/96] installing binutils-2.27-13.34 [ 12s] [9/96] installing cpio-2.11-3.3 [ 12s] [10/96] installing diffutils-3.3-3.3 [ 12s] [11/96] installing findutils-4.3.8-6.8 [ 12s] [12/96] installing hostname-3.20-5.3 [ 12s] [13/96] installing libattr-2.4.47-5.255 [ 12s] [14/96] installing libbz2-1.0.6-4.443 [ 13s] [15/96] installing libcap-2.24-4.460 [ 13s] [16/96] installing libelf-0.153-3.162 [ 13s] [17/96] installing libext2fs-1.43.4-6.1 [ 14s] [18/96] installing libfreebl3-3.34.1-5.216 [ 14s] [19/96] installing libgomp-6.2.1-33.2 [ 14s] [20/96] installing libitm-6.2.1-33.2 [ 14s] [21/96] installing libltdl-2.4.2-4.389 [ 15s] [22/96] installing liblua-5.1.5-5.17 [ 15s] [23/96] installing liblzma-5.2.4-6.53 [ 15s] [24/96] installing libpcre-8.41-6.3 [ 15s] [25/96] installing libpopt-1.16-4.75 [ 16s] [26/96] installing libsmack-1.3.1-5.210 [ 16s] [27/96] installing libsmartcols-2.30-13.3 [ 16s] [28/96] installing libsqlite-3.26.0-13.15 [ 17s] [29/96] installing libstdc++-6.2.1-33.2 [ 17s] [30/96] installing libuuid-2.30-13.3 [ 17s] [31/96] installing m4-1.4.17-3.3 [ 17s] [32/96] installing net-tools-2.0_20121208git-3.1 [ 17s] [33/96] installing nspr-4.12-4.55 [ 18s] [34/96] installing patch-2.7-3.75 [ 18s] [35/96] installing pkg-config-0.28-5.408 [ 18s] [36/96] installing sed-4.1c-4.3 [ 18s] [37/96] installing update-alternatives-1.18.15-4.3 [ 18s] [38/96] installing which-2.20-6.3 [ 18s] [39/96] installing zlib-1.2.11-5.154 [ 18s] [40/96] installing build-compare-2015.04.28-3.201 [ 18s] [41/96] installing libstdc++-devel-6.2.1-33.2 [ 18s] [42/96] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 21s] [43/96] installing terminfo-base-full-6.1-11.22 [ 22s] [44/96] installing cpp-6.2.1-33.2 [ 22s] [45/96] installing gcc-c++-6.2.1-33.2 [ 23s] [46/96] installing coreutils-6.9-3.8 [ 23s] [47/96] installing db4-4.8.30.NC-3.456 [ 23s] [48/96] installing gawk-3.1.5-5.4 [ 23s] [49/96] installing grep-2.5.2-6.3 [ 23s] [50/96] installing libacl-2.2.52-5.273 [ 23s] [51/96] installing libasm-0.153-3.162 [ 23s] [52/96] installing libblkid-2.30-13.3 [ 24s] [53/96] installing libcc1-6.2.1-33.2 [ 24s] [54/96] installing libgfortran-6.2.1-33.2 [ 24s] [55/96] installing libubsan-6.2.1-33.2 [ 25s] [56/96] installing make-4.0-4.73 [ 25s] [57/96] installing nss-certs-3.34.1-5.216 [ 25s] [58/96] installing smack-1.3.1-5.210 [ 25s] [59/96] installing bzip2-1.0.6-4.443 [ 25s] [60/96] installing libmagic-5.36-15.5 [ 25s] [61/96] installing libxml2-2.9.7-7.15 [ 26s] [62/96] installing xz-5.2.4-6.53 [ 26s] [63/96] installing libdw-0.153-3.162 [ 26s] [64/96] installing linux-glibc-devel-3.10-4.101 [ 27s] [65/96] installing file-5.36-15.5 [ 27s] [66/96] installing glibc-locale-2.24-13.37 [ 28s] [67/96] installing libmount-2.30-13.3 [ 28s] [68/96] installing tar-1.17-4.3 [ 28s] [69/96] installing gzip-1.3.12-7.230 [ 28s] [70/96] installing libfdisk-2.30-13.3 [ 28s] [71/96] installing libncurses6-6.1-11.22 [ 29s] [72/96] installing pam-1.1.6-8.1 [ 29s] [73/96] installing perl-5.26.0-8.7 [ 30s] [74/96] installing tzdata-2018i-10.1 [ 31s] [75/96] installing elfutils-0.153-3.162 [ 31s] [76/96] installing gcc-6.2.1-33.2 [ 32s] [77/96] installing build-mkbaselibs-20120927-3.1 [ 32s] [78/96] installing libncurses-6.1-11.22 [ 32s] [79/96] installing perl-Devel-Symdump-2.08-5.4 [ 32s] [80/96] installing perl-Test-Pod-1.45-5.1 [ 32s] [81/96] installing glibc-devel-2.24-13.37 [ 32s] [82/96] installing qemu-accel-x86_64-armv7l-0.4-13.23 [ 42s] [83/96] installing autoconf-2.69-5.126 [ 42s] [84/96] installing less-466-8.8 [ 42s] [85/96] installing libreadline-5.2-5.13 [ 42s] [86/96] installing procps-ng-3.3.15-8.3 [ 42s] [87/96] installing perl-Pod-Coverage-0.22-4.1 [ 43s] [88/96] installing automake-1.15.1-6.202 [ 43s] [89/96] installing build-20120927-3.1 [ 43s] [90/96] installing util-linux-2.30-13.3 [ 43s] [91/96] installing libtool-2.4.2-4.389 [ 43s] [92/96] installing util-linux-su-2.30-13.3 [ 43s] [93/96] installing nss-3.34.1-5.216 [ 43s] [94/96] installing libsoftokn3-3.34.1-5.216 [ 44s] [95/96] installing rpm-4.11.0.1-12.6 [ 44s] [96/96] installing rpm-build-4.11.0.1-12.6 [ 44s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 45s] Running build time source services... [ 45s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for perl-Test-Pod-Coverage.spec: [ 45s] 22c22 [ 45s] < Release: 1 [ 45s] --- [ 45s] > Release: 4.1 [ 45s] ----------------------------------------------------------------- [ 45s] ----- building perl-Test-Pod-Coverage.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 45s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/40fefdc964361621996d9ef229393a75-perl-Test-Pod-Coverage' -ba /home/abuild/rpmbuild/SOURCES/perl-Test-Pod-Coverage.spec [ 47s] Building target platforms: armv7l-tizen-linux [ 47s] Building for target armv7l-tizen-linux [ 47s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.j4pSGy [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + rm -rf Test-Pod-Coverage-1.08 [ 47s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Test-Pod-Coverage-1.08.tar.gz [ 47s] + /bin/tar -xf - [ 47s] + STATUS=0 [ 47s] + '[' 0 -ne 0 ']' [ 47s] + cd Test-Pod-Coverage-1.08 [ 47s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 47s] + cp /home/abuild/rpmbuild/SOURCES/perl-Test-Pod-Coverage.manifest . [ 47s] + exit 0 [ 47s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.FuazqM [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd Test-Pod-Coverage-1.08 [ 47s] ++ uname -m [ 47s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 47s] + LANG=C [ 47s] + export LANG [ 47s] + unset DISPLAY [ 47s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 47s] + export CFLAGS [ 47s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 47s] + export CXXFLAGS [ 47s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 47s] + export FFLAGS [ 47s] + LDFLAGS= [ 47s] + export LDFLAGS [ 47s] + perl Makefile.PL INSTALLDIRS=vendor [ 48s] Checking if your kit is complete... [ 48s] Looks good [ 48s] Generating a Unix-style Makefile [ 48s] Writing Makefile for Test::Pod::Coverage [ 48s] Writing MYMETA.yml and MYMETA.json [ 48s] + make -j4 [ 49s] cp Coverage.pm blib/lib/Test/Pod/Coverage.pm [ 50s] Manifying 1 pod document [ 50s] + exit 0 [ 50s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.t3130a [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd Test-Pod-Coverage-1.08 [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm [ 50s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm [ 50s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm install_vendor [ 51s] Manifying 1 pod document [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/Test/Pod/Coverage.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/share/man/man3/Test::Pod::Coverage.3pm [ 51s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/5.26.0/armv7l-linux-thread-multi/perllocal.pod [ 52s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi [ 52s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/5.26.0/armv7l-linux-thread-multi [ 52s] + FILES=perl-Test-Pod-Coverage.files [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0 -maxdepth 1 -type f [ 52s] + RES= [ 52s] + '[' -n '' ']' [ 52s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ -type d [ 52s] ++ sort [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] + continue [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/Test = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/Test [ 52s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ '{print $2}' [ 52s] + el=Test [ 52s] + all_dir=(${all_dir[@]} $el) [ 52s] + for dir in '`find ${base_dir} -type d | sort`' [ 52s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/Test/Pod = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ ']' [ 52s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/Test/Pod [ 52s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0/ '{print $2}' [ 52s] + el=Test/Pod [ 52s] + all_dir=(${all_dir[@]} $el) [ 52s] + for i in '${all_dir[@]}' [ 52s] + '[' Test = auto ']' [ 52s] + '[' /usr/lib/perl5/vendor_perl/5.26.0/Test = /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0//Test ']' [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0//Test -maxdepth 1 -type f [ 52s] + RES= [ 52s] + '[' -n '' ']' [ 52s] + fgen_dir /usr/lib/perl5/vendor_perl/5.26.0/Test [ 52s] + /bin/cat [ 52s] + for i in '${all_dir[@]}' [ 52s] + '[' Test/Pod = auto ']' [ 52s] + '[' /usr/lib/perl5/vendor_perl/5.26.0/Test/Pod = /usr/lib/perl5/vendor_perl/5.26.0/armv7l-linux-thread-multi/auto ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0//Test/Pod ']' [ 52s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0//Test/Pod -maxdepth 1 -type f [ 52s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0//Test/Pod/Coverage.pm [ 52s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0//Test/Pod/Coverage.pm ']' [ 52s] + fgen_dir /usr/lib/perl5/vendor_perl/5.26.0/Test/Pod [ 52s] + /bin/cat [ 52s] + for file in '$RES' [ 52s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/lib/perl5/vendor_perl/5.26.0//Test/Pod/Coverage.pm [ 52s] + fgen_file /usr/lib/perl5/vendor_perl/5.26.0/Test/Pod/Coverage.pm [ 52s] + /bin/cat [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/share/man ']' [ 52s] + fgen_file '/usr/share/man/man?/*' [ 52s] + /bin/cat [ 52s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/var/adm/perl-modules/perl-Test-Pod-Coverage ']' [ 52s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm/usr/bin ']' [ 52s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08 [ 52s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08/perl-Test-Pod-Coverage-debuginfo.manifest [ 52s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Test-Pod-Coverage-1.08/perl-Test-Pod-Coverage-debugsource.manifest [ 52s] + /usr/lib/rpm/check-buildroot [ 52s] + /usr/lib/rpm//brp-compress [ 52s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 52s] + /usr/lib/rpm/brp-python-hardlink [ 52s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm [ 52s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.Q0K9PF [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd Test-Pod-Coverage-1.08 [ 52s] + make test [ 52s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t [ 54s] # Testing Test::Pod::Coverage 1.08 [ 54s] t/00.load.t .............. ok [ 54s] t/all_modules.t .......... ok [ 55s] t/all_pod_coverage_ok.t .. ok [ 56s] t/alt_class.t ............ ok [ 57s] t/nopod.t ................ ok [ 57s] t/nosymbols.t ............ ok [ 58s] t/parms.t ................ ok [ 59s] t/pod.t .................. ok [ 60s] t/privates.t ............. ok [ 60s] t/self.t ................. ok [ 61s] t/simple.t ............... ok [ 61s] All tests successful. [ 61s] Files=11, Tests=23, 8 wallclock secs ( 0.27 usr 0.04 sys + 7.86 cusr 0.11 csys = 8.28 CPU) [ 61s] Result: PASS [ 61s] + exit 0 [ 61s] Processing files: perl-Test-Pod-Coverage-1.08-4.1.armv7l [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: perl(Test::Pod::Coverage) = 1.08 perl-Test-Pod-Coverage = 1.08-4.1 perl-Test-Pod-Coverage(armv7l-32) = 1.08-4.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Processing files: perl-Test-Pod-Coverage-debugsource-1.08-4.1.armv7l [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: perl-Test-Pod-Coverage-debugsource = 1.08-4.1 perl-Test-Pod-Coverage-debugsource(armv7l-32) = 1.08-4.1 [ 61s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 61s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm [ 61s] warning: Could not canonicalize hostname: obsnw09 [ 61s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-4.1.src.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-Test-Pod-Coverage-1.08-4.1.armv7l.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-Test-Pod-Coverage-debugsource-1.08-4.1.armv7l.rpm [ 61s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.qfj30w [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd Test-Pod-Coverage-1.08 [ 61s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-Coverage-1.08-4.1.arm [ 61s] + exit 0 [ 61s] ... checking for files with abuild user/group [ 61s] ... creating baselibs [ 62s] ... comparing built packages with the former built [ 62s] /usr/lib/build/pkg-diff.sh [ 62s] compare /.build.oldpackages/perl-Test-Pod-Coverage-1.08-3.4.src.rpm /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-Coverage-1.08-4.1.src.rpm [ 62s] This is not a prerelease project. Compare the project name. [ 62s] comparing rpmtags [ 62s] comparing RELEASE [ 62s] comparing PROVIDES [ 62s] comparing scripts [ 62s] comparing filelist [ 62s] comparing file checksum [ 62s] RPM meta information is identical [ 62s] compare /.build.oldpackages/perl-Test-Pod-Coverage-1.08-3.4.noarch.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-Test-Pod-Coverage-1.08-4.1.armv7l.rpm [ 62s] Comparing perl-Test-Pod-Coverage-1.08-3.4.noarch.rpm to perl-Test-Pod-Coverage-1.08-4.1.armv7l.rpm [ 62s] This is not a prerelease project. Compare the project name. [ 63s] comparing rpmtags [ 63s] --- /tmp/tmp.rJrQ127308/tmp.JaLX127433 2019-04-02 11:35:52.995310895 +0000 [ 63s] +++ /tmp/tmp.rJrQ127308/tmp.DXcT127459 2019-04-02 11:35:53.003310584 +0000 [ 63s] @@ -4,8 +4,8 @@ [ 63s] tizen [ 63s] Artistic-1.0 or GPL-1.0+ Artistic-1.0 or GPL-1.0+ [ 63s] Development/Libraries/Perl http://search.cpan.org/dist/Test-Pod-Coverage/ (none) (none) (none) [ 63s] - (none) 4.11.0.1 noarch-tizen-linux [ 63s] + (none) 4.11.0.1 armv7l-tizen-linux [ 63s] cpio xz 5T [ 63s] [ 63s] 1363953600 Anas Nashif upstream/1.08@d245e42 - Remove old perl macro [ 63s] -obs://build.tizen.org/Tizen:Base/standard/256f8f945c76a127702514c73498201d-perl-Test-Pod-Coverage Tizen:Base [ 63s] +obs://build.tizen.org/Tizen:Base/standard/40fefdc964361621996d9ef229393a75-perl-Test-Pod-Coverage Tizen:Base [ 63s] RPM meta information is different [ 63s] compare /.build.oldpackages/perl-Test-Pod-Coverage-debugsource-1.08-3.4.noarch.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-Test-Pod-Coverage-debugsource-1.08-4.1.armv7l.rpm [ 63s] Comparing perl-Test-Pod-Coverage-debugsource-1.08-3.4.noarch.rpm to perl-Test-Pod-Coverage-debugsource-1.08-4.1.armv7l.rpm [ 63s] This is not a prerelease project. Compare the project name. [ 63s] comparing rpmtags [ 63s] --- /tmp/tmp.lHXp127664/tmp.MXqM127826 2019-04-02 11:35:53.211302506 +0000 [ 63s] +++ /tmp/tmp.lHXp127664/tmp.DaSV127857 2019-04-02 11:35:53.219302195 +0000 [ 63s] @@ -6,8 +6,8 @@ [ 63s] tizen [ 63s] Artistic-1.0 or GPL-1.0+ Artistic-1.0 or GPL-1.0+ [ 63s] Development/Debug http://search.cpan.org/dist/Test-Pod-Coverage/ (none) (none) (none) [ 63s] - (none) 4.11.0.1 noarch-tizen-linux [ 63s] + (none) 4.11.0.1 armv7l-tizen-linux [ 63s] cpio xz 5T [ 63s] [ 63s] 1363953600 Anas Nashif upstream/1.08@d245e42 - Remove old perl macro [ 63s] -obs://build.tizen.org/Tizen:Base/standard/256f8f945c76a127702514c73498201d-perl-Test-Pod-Coverage Tizen:Base [ 63s] +obs://build.tizen.org/Tizen:Base/standard/40fefdc964361621996d9ef229393a75-perl-Test-Pod-Coverage Tizen:Base [ 63s] RPM meta information is different [ 63s] [ 63s] obsnw09 finished "build perl-Test-Pod-Coverage.spec" at Tue Apr 2 11:35:53 UTC 2019. [ 63s] Retried build at Mon Apr 8 02:54:41 2019 returned same result, skipped Retried build at Fri Apr 12 15:00:37 2019 returned same result, skipped Retried build at Thu Apr 18 03:24:02 2019 returned same result, skipped