[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w32 started "build _service:gbs:perl-WWW-Curl.spec" at Wed Sep 28 16:43:55 UTC 2016. [ 0s] [ 0s] Building perl-WWW-Curl for project 'Tizen:Common' repository 'arm-wayland' arch 'armv7l' srcmd5 'c6013824b2fb3d625e51dec1cec33c9b' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 0s] [5/40] preinstalling libgcc... [ 0s] [6/40] preinstalling bash... [ 0s] [7/40] preinstalling diffutils... [ 0s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-armv7l... [ 3s] [25/40] preinstalling qemu-linux-user-cross... [ 4s] [26/40] preinstalling coreutils... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 4s] [31/40] preinstalling bzip2... [ 4s] [32/40] preinstalling libmagic... [ 4s] [33/40] preinstalling libxml2... [ 4s] [34/40] preinstalling libmount... [ 4s] [35/40] preinstalling tar... [ 4s] [36/40] preinstalling util-linux... [ 4s] [37/40] preinstalling util-linux-su... [ 4s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 5s] [6/9] preinstalling grep... [ 5s] [7/9] preinstalling libblkid... [ 6s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 6s] reordering...cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 7s] booting kvm ... [ 7s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.21.2 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 5019/2392064 files, 241971/9568256 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 11s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] swapon /dev/vdb [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] mount: none is already mounted or /proc busy [ 11s] mount: none is already mounted or /dev/pts busy [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 11s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 11s] running qemu-linux-user-cross postinstall script [ 11s] running qemu-accel-armv7l postinstall script [ 11s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 12s] [1/105] installing libmagic-data-5.28-4.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [2/105] installing setup-0.9-3.3 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [3/105] installing terminfo-base-5.9-1.17 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [4/105] installing filesystem-3.1-10.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [5/105] installing glibc-2.20-11.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [6/105] installing libatomic-4.9.2-13.3 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [7/105] installing libgcc-4.9.2-13.3 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [8/105] installing libgomp-4.9.2-13.3 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [9/105] installing bash-3.2.57-3.4 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [10/105] installing cpio-2.11-1.12 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [11/105] installing diffutils-3.3-1.13 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [12/105] installing findutils-4.3.8-3.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [13/105] installing hostname-3.12-1.8 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [14/105] installing libattr-2.4.47-1.16 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [15/105] installing libbz2-1.0.6-1.96 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [16/105] installing libcap-2.24-1.91 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [17/105] installing libcares-1.10.0-1.12 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [18/105] installing libelf-0.153-5.23 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [19/105] installing libext2fs-1.42.13-2.8 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [20/105] installing libfreebl3-3.23-4.40 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [21/105] installing libidn-1.15-3.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [22/105] installing libitm-4.9.2-13.3 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [23/105] installing libltdl-2.4.2-3.5 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [24/105] installing liblua-5.1.4-1.18 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [25/105] installing liblzma-5.1.3-3.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [26/105] installing libpcre-8.39-2.3 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [27/105] installing libpopt-1.16-2.7 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [28/105] installing libsmack-1.2.0-4.4 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [29/105] installing libsmartcols-2.28-7.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [30/105] installing libsqlite-3.8.10.2-1.15 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [31/105] installing libstdc++-4.9.2-13.3 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [32/105] installing libuuid-2.28-7.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [33/105] installing m4-1.4.17-1.8 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [34/105] installing net-tools-2.0_20121208git-1.11 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [35/105] installing nghttp2-1.0.0-2.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [36/105] installing nspr-4.12-4.13 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [37/105] installing patch-2.7-1.10 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [38/105] installing pkg-config-0.28-1.13 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [39/105] installing sed-4.1c-2.6 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [40/105] installing update-alternatives-1.16.3-1.8 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [41/105] installing which-2.20-1.8 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [42/105] installing zlib-1.2.8-1.17 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [43/105] installing libncurses-5.9-1.17 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [44/105] installing build-compare-2015.04.28-4.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [45/105] installing libstdc++-devel-4.9.2-13.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [46/105] installing qemu-linux-user-cross-2.7.0-1.1 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [47/105] installing cpp-4.9.2-13.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [48/105] installing gcc-c++-4.9.2-13.3 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [49/105] installing binutils-2.25-6.6 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [50/105] installing coreutils-6.9-8.1 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [51/105] installing db4-4.8.30.NC-1.19 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [52/105] installing gawk-3.1.5-2.11 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [53/105] installing grep-2.5.2-2.11 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [54/105] installing less-466-1.11 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [55/105] installing libacl-2.2.52-3.5 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [56/105] installing libasm-0.153-5.23 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [57/105] installing libblkid-2.28-7.2 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [58/105] installing libopenssl-1.0.2h-8.5 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [59/105] installing libreadline-5.2-2.6 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [60/105] installing libubsan-4.9.2-13.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [61/105] installing make-4.0-1.10 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [62/105] installing nss-certs-3.23-4.40 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [63/105] installing smack-1.2.0-4.4 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [64/105] installing bzip2-1.0.6-1.96 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [65/105] installing libmagic-5.28-4.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [66/105] installing libxml2-2.9.4-5.4 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [67/105] installing xz-5.1.3-3.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [68/105] installing libdw-0.153-5.23 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [69/105] installing linux-glibc-devel-3.10-1.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [70/105] installing file-5.28-4.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [71/105] installing glibc-locale-2.20-11.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [72/105] installing libmount-2.28-7.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [73/105] installing openssl-1.0.2h-8.5 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [74/105] installing tar-1.17-2.8 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [75/105] installing gzip-1.3.12-2.14 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [76/105] installing libfdisk1-2.28-7.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [77/105] installing pam-1.1.6-4.5 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [78/105] installing perl-5.20.0-3.58 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [79/105] installing tzdata-2016f-2.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [80/105] installing elfutils-0.153-5.23 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [81/105] installing gcc-4.9.2-13.3 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [82/105] installing libcurl-7.50.2-12.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [83/105] installing build-mkbaselibs-20120927-1.3 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [84/105] installing perl-Devel-Symdump-2.08-1.3 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [85/105] installing glibc-devel-2.20-11.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [86/105] installing qemu-accel-armv7l-0.4-9.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [87/105] installing autoconf-2.69-1.5 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [88/105] installing util-linux-2.28-7.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [89/105] installing perl-Pod-Coverage-0.22-1.3 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [90/105] installing libcares-devel-1.10.0-1.12 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [91/105] installing libidn-devel-1.15-3.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [92/105] installing zlib-devel-1.2.8-1.17 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [93/105] installing automake-1.14.1-1.4 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [94/105] installing util-linux-su-2.28-7.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [95/105] installing build-20120927-1.3 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [96/105] installing perl-Test-Pod-Coverage-1.08-1.3 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [97/105] installing libcurl-devel-7.50.2-12.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [98/105] installing libopenssl-devel-1.0.2h-8.5 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [99/105] installing libtool-2.4.2-3.5 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [100/105] installing nss-3.23-4.40 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [101/105] installing libsoftokn3-3.23-4.40 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [102/105] installing rpm-4.11.0.1-8.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [103/105] installing rpmlint-mini-1.5-3.23 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [104/105] installing rpm-build-4.11.0.1-8.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [105/105] installing rpmlint-tizen-1.0-1.3 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] removing nis flags from //etc/nsswitch.conf... [ 28s] now finalizing build dir... [ 29s] qemu: Unsupported syscall: 311 [ 30s] Warning: spec file parser line 24: can't expand %(...) [ 30s] Warning: spec file parser line 30: can't expand %(...) [ 34s] build target is armv7l-tizen-linux [ 34s] ----------------------------------------------------------------- [ 34s] I have the following modifications for perl-WWW-Curl.spec: [ 34s] 18c18 [ 34s] < release: 4.1 [ 34s] --- [ 34s] > release: 5.9 [ 34s] ----------------------------------------------------------------- [ 34s] ----- building perl-WWW-Curl.spec (user abuild) [ 34s] ----------------------------------------------------------------- [ 34s] ----------------------------------------------------------------- [ 34s] Running qemu build hang workaround... [ 34s] /bin/ps command not found [ 34s] qemu: Unsupported syscall: 311 [ 34s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common/arm-wayland/c6013824b2fb3d625e51dec1cec33c9b-perl-WWW-Curl' /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.spec [ 34s] Building target platforms: armv7l-tizen-linux [ 34s] Building for target armv7l-tizen-linux [ 34s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oXuuDI [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + rm -rf perl-WWW-Curl-4.05 [ 34s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl-4.05.tar.bz2 [ 34s] + /bin/tar -xvvf - [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/ [ 34s] -rw-rw-r-- root/root 11915 2013-07-01 18:58 perl-WWW-Curl-4.05/Changes [ 34s] -rw-rw-r-- root/root 31779 2013-07-01 18:58 perl-WWW-Curl-4.05/Curl.xs [ 34s] -rw-rw-r-- root/root 255 2013-07-01 18:58 perl-WWW-Curl-4.05/LICENSE [ 34s] -rw-rw-r-- root/root 963 2013-07-01 18:58 perl-WWW-Curl-4.05/MANIFEST [ 34s] -rw-rw-r-- root/root 487 2013-07-01 18:58 perl-WWW-Curl-4.05/META.yml [ 34s] -rw-rw-r-- root/root 8543 2013-07-01 18:58 perl-WWW-Curl-4.05/Makefile.PL [ 34s] -rw-rw-r-- root/root 2475 2013-07-01 18:58 perl-WWW-Curl-4.05/README [ 34s] -rw-rw-r-- root/root 673 2013-07-01 18:58 perl-WWW-Curl-4.05/README.Win32 [ 34s] -rw-rw-r-- root/root 4168 2013-07-01 18:58 perl-WWW-Curl-4.05/SIGNATURE [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/ [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/ [ 34s] -rw-rw-r-- root/root 8549 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install.pm [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/ [ 34s] -rw-rw-r-- root/root 1053 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Base.pm [ 34s] -rw-rw-r-- root/root 1788 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Can.pm [ 34s] -rw-rw-r-- root/root 1530 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/External.pm [ 34s] -rw-rw-r-- root/root 1094 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/MakeMaker.pm [ 34s] -rw-rw-r-- root/root 6225 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Makefile.pm [ 34s] -rw-rw-r-- root/root 9448 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Metadata.pm [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/ [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/ [ 34s] -rw-rw-r-- root/root 10200 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl.pm [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/ [ 34s] -rw-rw-r-- root/root 5242 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Easy.pm [ 34s] -rw-rw-r-- root/root 187 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Form.pm [ 34s] -rw-rw-r-- root/root 367 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Multi.pm [ 34s] -rw-rw-r-- root/root 1018 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Share.pm [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/ [ 34s] -rw-rw-r-- root/root 69 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.manifest [ 34s] -rw-rw-r-- root/root 3997 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.spec [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/ [ 34s] -rw-rw-r-- root/root 152 2013-07-01 18:58 perl-WWW-Curl-4.05/t/00constants.t [ 34s] -rw-rw-r-- root/root 1630 2013-07-01 18:58 perl-WWW-Curl-4.05/t/01basic.t [ 34s] -rw-rw-r-- root/root 1192 2013-07-01 18:58 perl-WWW-Curl-4.05/t/02callbacks.t [ 34s] -rw-rw-r-- root/root 1049 2013-07-01 18:58 perl-WWW-Curl-4.05/t/04abort-test.t [ 34s] -rw-rw-r-- root/root 1716 2013-07-01 18:58 perl-WWW-Curl-4.05/t/05progress.t [ 34s] -rw-rw-r-- root/root 1827 2013-07-01 18:58 perl-WWW-Curl-4.05/t/06http-post.t [ 34s] -rw-rw-r-- root/root 2103 2013-07-01 18:58 perl-WWW-Curl-4.05/t/07ftp-upload.t [ 34s] -rw-rw-r-- root/root 3243 2013-07-01 18:58 perl-WWW-Curl-4.05/t/08ssl.t [ 34s] -rw-rw-r-- root/root 1978 2013-07-01 18:58 perl-WWW-Curl-4.05/t/09times.t [ 34s] -rw-rw-r-- root/root 1284 2013-07-01 18:58 perl-WWW-Curl-4.05/t/10errbuf.t [ 34s] -rw-rw-r-- root/root 1133 2013-07-01 18:58 perl-WWW-Curl-4.05/t/13slowleak.t [ 34s] -rw-rw-r-- root/root 2178 2013-07-01 18:58 perl-WWW-Curl-4.05/t/14duphandle.t [ 34s] -rw-rw-r-- root/root 3153 2013-07-01 18:58 perl-WWW-Curl-4.05/t/15duphandle-callback.t [ 34s] -rw-rw-r-- root/root 2043 2013-07-01 18:58 perl-WWW-Curl-4.05/t/16formpost.t [ 34s] -rw-rw-r-- root/root 2236 2013-07-01 18:58 perl-WWW-Curl-4.05/t/17slist.t [ 34s] -rw-rw-r-- root/root 1547 2013-07-01 18:58 perl-WWW-Curl-4.05/t/18twinhandles.t [ 34s] -rw-rw-r-- root/root 134 2013-07-01 18:58 perl-WWW-Curl-4.05/t/meta.t [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/ [ 34s] -rw-rw-r-- root/root 95 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/00constants.t [ 34s] -rw-rw-r-- root/root 407 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/01basic.t [ 34s] -rw-rw-r-- root/root 456 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/02header-callback.t [ 34s] -rw-rw-r-- root/root 454 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/03body-callback.t [ 34s] -rw-rw-r-- root/root 422 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/04abort.t [ 34s] -rw-rw-r-- root/root 668 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/05progress.t [ 34s] -rw-rw-r-- root/root 727 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/06http-post.t [ 34s] -rw-rw-r-- root/root 205 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/07errbuf.t [ 34s] -rw-rw-r-- root/root 443 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/08duphandle.t [ 34s] -rw-rw-r-- root/root 489 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/09duphandle-callback.t [ 34s] -rw-rw-r-- root/root 1269 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/10multi-callback.t [ 34s] -rw-rw-r-- root/root 381 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/README [ 34s] -rw-rw-r-- root/root 232 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod-coverage.t [ 34s] -rw-rw-r-- root/root 140 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod.t [ 34s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/template/ [ 34s] -rw-rw-r-- root/root 1095 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Easy.pm.tmpl [ 34s] -rw-rw-r-- root/root 763 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Share.pm.tmpl [ 34s] -rw-rw-r-- root/root 110 2013-07-01 18:58 perl-WWW-Curl-4.05/typemap [ 34s] + STATUS=0 [ 34s] + '[' 0 -ne 0 ']' [ 34s] + cd perl-WWW-Curl-4.05 [ 34s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 34s] + cp /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.manifest . [ 34s] + chmod -R u+w /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 34s] + exit 0 [ 34s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.2Od6um [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd perl-WWW-Curl-4.05 [ 34s] ++ uname -m [ 34s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 34s] + LANG=C [ 34s] + export LANG [ 34s] + unset DISPLAY [ 34s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 34s] + export CFLAGS [ 34s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 34s] + export CXXFLAGS [ 34s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 34s] + export FFLAGS [ 34s] + LDFLAGS= [ 34s] + export LDFLAGS [ 34s] + LD_AS_NEEDED=1 [ 34s] + export LD_AS_NEEDED [ 34s] + grep -v '.bak$' [ 34s] + xargs --no-run-if-empty /bin/perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)' [ 34s] + grep -rsl '^#!.*perl' . [ 35s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 35s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr| if $ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ ' [ 36s] + /bin/perl Makefile.PL [ 37s] Locating required external dependency bin:curl-config... found at /bin/curl-config. [ 37s] Found curl.h in /usr/include/curl/curl.h [ 37s] Building curlopt-constants.c for your libcurl version [ 37s] Building Easy.pm constants for your libcurl version [ 37s] Building Share.pm constants for your libcurl version [ 38s] Checking if your kit is complete... [ 38s] Looks good [ 39s] Generating a Unix-style Makefile [ 39s] Writing Makefile for WWW::Curl [ 39s] Writing MYMETA.yml and MYMETA.json [ 39s] + /bin/make [ 43s] cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm [ 43s] cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm [ 43s] cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm [ 43s] AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy) [ 43s] cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm [ 43s] cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm [ 43s] AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share) [ 43s] Running Mkbootstrap for WWW::Curl () [ 43s] chmod 644 Curl.bs [ 43s] /usr/bin/perl "-Iinc" /usr/lib/perl5/5.20.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.20.0/ExtUtils/typemap -typemap typemap Curl.xs > Curl.xsc && mv Curl.xsc Curl.c [ 44s] cc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE" Curl.c [ 45s] Curl.xs: In function 'fwrite_wrapper2': [ 45s] Curl.xs:341:13: warning: unused variable 'sv' [-Wunused-variable] [ 45s] SV *sv; [ 45s] ^ [ 45s] In file included from Curl.xs:16:0: [ 45s] Curl.c: In function 'XS_WWW__Curl__Easy_init': [ 45s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:183:20: warning: unused variable 'ix' [-Wunused-variable] [ 45s] #define dXSI32 I32 ix = XSANY.any_i32 [ 45s] ^ [ 45s] Curl.c:747:5: note: in expansion of macro 'dXSI32' [ 45s] dXSI32; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Easy_version': [ 45s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] [ 45s] #define dITEMS I32 items = (I32)(SP - MARK) [ 45s] ^ [ 45s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' [ 45s] dSP; dAXMARK; dITEMS [ 45s] ^ [ 45s] Curl.c:865:11: note: in expansion of macro 'dXSARGS' [ 45s] dVAR; dXSARGS; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Easy_internal_setopt': [ 45s] Curl.c:1064:6: warning: unused variable 'value' [-Wunused-variable] [ 45s] int value = (int)SvIV(ST(2)) [ 45s] ^ [ 45s] Curl.c:1062:6: warning: unused variable 'option' [-Wunused-variable] [ 45s] int option = (int)SvIV(ST(1)) [ 45s] ^ [ 45s] Curl.c:1061:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 45s] WWW__Curl__Easy self; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Easy_cleanup': [ 45s] Curl.c:1220:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 45s] WWW__Curl__Easy self; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Easy_strerror': [ 45s] Curl.c:1291:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 45s] WWW__Curl__Easy self; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Form_add': [ 45s] Curl.c:1364:9: warning: unused variable 'value' [-Wunused-variable] [ 45s] char * value = (char *)SvPV_nolen(ST(2)) [ 45s] ^ [ 45s] Curl.c:1362:9: warning: unused variable 'name' [-Wunused-variable] [ 45s] char * name = (char *)SvPV_nolen(ST(1)) [ 45s] ^ [ 45s] Curl.c:1361:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 45s] WWW__Curl__Form self; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Form_addfile': [ 45s] Curl.c:1401:9: warning: unused variable 'type' [-Wunused-variable] [ 45s] char * type = (char *)SvPV_nolen(ST(3)) [ 45s] ^ [ 45s] Curl.c:1399:9: warning: unused variable 'description' [-Wunused-variable] [ 45s] char * description = (char *)SvPV_nolen(ST(2)) [ 45s] ^ [ 45s] Curl.c:1397:9: warning: unused variable 'filename' [-Wunused-variable] [ 45s] char * filename = (char *)SvPV_nolen(ST(1)) [ 45s] ^ [ 45s] Curl.c:1396:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 45s] WWW__Curl__Form self; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Multi_strerror': [ 45s] Curl.c:1706:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 45s] WWW__Curl__Multi self; [ 45s] ^ [ 45s] Curl.c: In function 'XS_WWW__Curl__Share_strerror': [ 45s] Curl.c:1874:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 45s] WWW__Curl__Share self; [ 45s] ^ [ 46s] rm -f blib/arch/auto/WWW/Curl/Curl.so [ 46s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe Curl.o -o blib/arch/auto/WWW/Curl/Curl.so \ [ 46s] -lcurl -lcares -lnghttp2 -lidn -lssl -lcrypto -lssl -lcrypto -lz \ [ 46s] [ 47s] chmod 755 blib/arch/auto/WWW/Curl/Curl.so [ 47s] /usr/bin/perl "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644 [ 48s] Manifying blib/man3/WWW::Curl.3pm [ 48s] + exit 0 [ 48s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.4ifWwP [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd perl-WWW-Curl-4.05 [ 48s] + LANG=C [ 48s] + export LANG [ 48s] + unset DISPLAY [ 48s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 48s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 48s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm '!=' / ']' [ 48s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 48s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print $ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr| : qq|DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm| ' [ 49s] + /bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr bindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/etc datadir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/com mandir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/info install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 49s] Running Mkbootstrap for WWW::Curl () [ 49s] chmod 644 Curl.bs [ 50s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm [ 50s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/man/man3/WWW::Curl.3pm [ 51s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/perllocal.pod [ 51s] + cmd=/usr/share/spec-helper/compress_files [ 51s] + '[' -x /usr/share/spec-helper/compress_files ']' [ 51s] + cmd=/usr/lib/rpm/brp-compress [ 51s] + '[' -x /usr/lib/rpm/brp-compress ']' [ 51s] + /usr/lib/rpm/brp-compress [ 51s] + '[' -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ']' [ 51s] + xargs -i rm -f '{}' [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm -name perllocal.pod -o -name .packlist -o -name '*.bs' [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr -type d -depth -exec rmdir '{}' ';' [ 51s] + /bin/perl -MFile::Find -le ' [ 51s] find({ wanted => \&wanted, no_chdir => 1}, "/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm"); [ 51s] print "%doc README.Win32 template inc Changes README LICENSE"; [ 51s] for my $x (sort @dirs, @files) { [ 51s] push @ret, $x unless indirs($x); [ 51s] } [ 51s] print join "\n", sort @ret; [ 51s] [ 51s] sub wanted { [ 51s] return if /auto$/; [ 51s] [ 51s] local $_ = $File::Find::name; [ 51s] my $f = $_; s|^\Q/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm\E||; [ 51s] return unless length; [ 51s] return $files[@files] = $_ if -f $f; [ 51s] [ 51s] $d = $_; [ 51s] /\Q$d\E/ && return for reverse sort @INC; [ 51s] $d =~ /\Q$_\E/ && return [ 51s] for qw|/etc /usr/man /usr/bin /usr/share|; [ 51s] [ 51s] $dirs[@dirs] = $_; [ 51s] } [ 51s] [ 51s] sub indirs { [ 51s] my $x = shift; [ 51s] $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs; [ 51s] } [ 51s] ' [ 52s] + '[' -z WWW-Curl-4.05-filelist ']' [ 52s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 52s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 52s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 52s] 220 blocks [ 52s] + /usr/lib/rpm/check-buildroot [ 52s] + /usr/lib/rpm//brp-compress [ 52s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 52s] + /usr/lib/rpm/brp-python-hardlink [ 52s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 52s] Processing files: perl-WWW-Curl-4.05-5.9.armv7l [ 52s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 52s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 52s] [ 52s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.whRLJz [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd perl-WWW-Curl-4.05 [ 52s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + export DOCDIR [ 52s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + cp -pr README.Win32 /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + cp -pr template /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + cp -pr inc /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm/usr/share/doc/packages/perl-WWW-Curl [ 52s] + exit 0 [ 54s] Provides: Curl.so perl(Module::Install) = 0.75 perl(Module::Install::Base) = 0.75 perl(Module::Install::Base::FakeAdmin) perl(Module::Install::Can) = 0.75 perl(Module::Install::External) = 0.75 perl(Module::Install::MakeMaker) = 0.75 perl(Module::Install::Makefile) = 0.75 perl(Module::Install::Metadata) = 0.75 perl(WWW::Curl) = 4.05 perl(WWW::Curl::Easy) = 4.05 perl(WWW::Curl::Form) perl(WWW::Curl::Multi) perl(WWW::Curl::Share) perl-WWW-Curl = 4.05-5.9 perl-WWW-Curl(armv7l-32) = 4.05-5.9 [ 54s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 54s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 54s] Processing files: perl-WWW-Curl-debugsource-4.05-5.9.armv7l [ 54s] Provides: perl-WWW-Curl-debugsource = 4.05-5.9 perl-WWW-Curl-debugsource(armv7l-32) = 4.05-5.9 [ 54s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 54s] Processing files: perl-WWW-Curl-debuginfo-4.05-5.9.armv7l [ 54s] Provides: perl-WWW-Curl-debuginfo = 4.05-5.9 perl-WWW-Curl-debuginfo(armv7l-32) = 4.05-5.9 [ 54s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 54s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 54s] warning: Could not canonicalize hostname: w32 [ 54s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.9.src.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.9.armv7l.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.9.armv7l.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.9.armv7l.rpm [ 54s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.A7lZUS [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd perl-WWW-Curl-4.05 [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 54s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm '!=' / ']' [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-5.9.arm [ 54s] + exit 0 [ 54s] ... checking for files with abuild user/group [ 54s] [ 54s] RPMLINT report: [ 54s] =============== [ 55s] qemu: Unsupported syscall: 311 [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix is not allowed in Tizen [ 55s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl is not allowed in Tizen [ 56s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW is not allowed in Tizen [ 56s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm is not allowed in Tizen [ 56s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix is not allowed in Tizen [ 56s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm is not allowed in Tizen [ 56s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW is not allowed in Tizen [ 56s] perl files installed a non-vendor installed path, [ 56s] which is not allowed in SUSE. [ 56s] [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm [ 56s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW [ 56s] This perl module package installs files under the subdirectory site_perl, [ 56s] while they must appear under vendor_perl. [ 56s] [ 56s] perl-WWW-Curl.src:56: W: rpm-buildroot-usage %build %{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq|PREFIX=%{buildroot}%{_prefix}| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '` [ 56s] $RPM_BUILD_ROOT should not be touched during %build or %prep stage, as it may [ 56s] break short circuit builds. [ 56s] [ 56s] perl-WWW-Curl.armv7l: E: non-standard-group (Badness: 200) Applications/CPAN [ 56s] perl-WWW-Curl.src: E: non-standard-group (Badness: 200) Applications/CPAN [ 56s] The value of the Group tag in the package is not valid. Valid groups are [ 56s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 56s] [ 56s] perl-WWW-Curl.armv7l: W: non-linux-readme /usr/share/doc/packages/perl-WWW-Curl/README.Win32 [ 56s] Your package contains a file that contains instructions for non-linux [ 56s] platforms. They're most likely unneccessary bloat, consider removing them [ 56s] from your package. [ 56s] [ 56s] perl-WWW-Curl.src:59: W: make-check-outside-check-section %{__make} test [ 56s] Make check or other automated regression test should be run in %check, as they [ 56s] can be disabled with a rpm macro for short circuiting purposes. [ 56s] [ 56s] perl-WWW-Curl.armv7l: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/perl-WWW-Curl/LICENSE [ 56s] A file whose name suggests that it contains a license is included in the [ 56s] package as a document. Such files need to be marked with %license and not with [ 56s] %doc, which will install them in a special directory seperated from the [ 56s] documentation. [ 56s] [ 56s] perl-WWW-Curl.src: W: invalid-url Source0: perl-WWW-Curl-4.05.tar.bz2 [ 56s] The value should be a valid, public HTTP, HTTPS, or FTP URL. [ 56s] [ 56s] perl-WWW-Curl.armv7l: E: invalid-license (Badness: 200) Artistic [ 56s] perl-WWW-Curl.src: E: invalid-license (Badness: 200) Artistic [ 56s] The specified license string is not recognized. Please refer to [ 56s] http://spdx.org/licenses/ for the list of known licences and their exact [ 56s] spelling. [ 56s] [ 56s] perl-WWW-Curl.src:20: W: hardcoded-packager-tag Arix [ 56s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 56s] to use rebuilder's own defaults. [ 56s] [ 56s] perl-WWW-Curl.armv7l: W: explicit-lib-dependency libcurl [ 56s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 56s] explicit Requires: tags. [ 56s] [ 56s] 2 packages and 0 specfiles checked; 5 errors, 34 warnings. [ 56s] [ 56s] ... creating baselibs [ 56s] qemu: Unsupported syscall: 311 [ 56s] ... comparing built packages with the former built [ 56s] /usr/lib/build/pkg-diff.sh [ 57s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.8.src.rpm /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.9.src.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] comparing RELEASE [ 57s] comparing PROVIDES [ 57s] comparing scripts [ 57s] comparing filelist [ 57s] comparing file checksum [ 57s] RPM meta information is identical [ 57s] compare /.build.oldpackages/perl-WWW-Curl-4.05-5.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.9.armv7l.rpm [ 57s] Comparing perl-WWW-Curl-4.05-5.8.armv7l.rpm to perl-WWW-Curl-4.05-5.9.armv7l.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] comparing RELEASE [ 58s] comparing PROVIDES [ 58s] comparing scripts [ 58s] comparing filelist [ 58s] comparing file checksum [ 58s] creating rename script [ 58s] RPM file checksum differs. [ 58s] Extracting packages [ 58s] /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm differs (Perl5 module source, ASCII text) [ 58s] --- old//usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm 2016-08-06 00:49:13.000000000 +0000 [ 58s] +++ new//usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm 2016-09-28 16:44:31.000000000 +0000 [ 58s] @@ -36,6 +36,7 @@ [ 58s] CURLOPT_CONNECTTIMEOUT [ 58s] CURLOPT_CONNECTTIMEOUT_MS [ 58s] CURLOPT_CONNECT_ONLY [ 58s] +CURLOPT_CONNECT_TO [ 58s] CURLOPT_CONV_FROM_NETWORK_FUNCTION [ 58s] CURLOPT_CONV_FROM_UTF8_FUNCTION [ 58s] CURLOPT_CONV_TO_NETWORK_FUNCTION [ 58s] @@ -225,6 +226,7 @@ [ 58s] CURLOPT_STREAM_DEPENDS [ 58s] CURLOPT_STREAM_DEPENDS_E [ 58s] CURLOPT_STREAM_WEIGHT [ 58s] +CURLOPT_TCP_FASTOPEN [ 58s] CURLOPT_TCP_KEEPALIVE [ 58s] CURLOPT_TCP_KEEPIDLE [ 58s] CURLOPT_TCP_KEEPINTVL [ 58s] @@ -280,6 +282,7 @@ [ 58s] CURLINFO_HTTPAUTH_AVAIL [ 58s] CURLINFO_HTTP_CODE [ 58s] CURLINFO_HTTP_CONNECTCODE [ 58s] +CURLINFO_HTTP_VERSION [ 58s] CURLINFO_LASTONE [ 58s] CURLINFO_LASTSOCKET [ 58s] CURLINFO_LOCAL_IP [ 58s] compare /.build.oldpackages/perl-WWW-Curl-debuginfo-4.05-5.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.9.armv7l.rpm [ 58s] skipping -debuginfo package [ 58s] compare /.build.oldpackages/perl-WWW-Curl-debugsource-4.05-5.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.9.armv7l.rpm [ 58s] Comparing perl-WWW-Curl-debugsource-4.05-5.8.armv7l.rpm to perl-WWW-Curl-debugsource-4.05-5.9.armv7l.rpm [ 58s] This is not a prerelease project. Compare the project name. [ 58s] comparing rpmtags [ 58s] comparing RELEASE [ 58s] comparing PROVIDES [ 58s] comparing scripts [ 58s] comparing filelist [ 58s] comparing file checksum [ 59s] creating rename script [ 59s] RPM file checksum differs. [ 59s] Extracting packages [ 59s] /usr/src/debug/perl-WWW-Curl-4.05/curlopt-constants.c differs (ASCII text) [ 59s] --- old//usr/src/debug/perl-WWW-Curl-4.05/curlopt-constants.c 2016-08-06 00:49:13.000000000 +0000 [ 59s] +++ new//usr/src/debug/perl-WWW-Curl-4.05/curlopt-constants.c 2016-09-28 16:44:31.000000000 +0000 [ 59s] @@ -40,6 +40,7 @@ [ 59s] if (strEQ(name, "HTTPAUTH_AVAIL")) return CURLINFO_HTTPAUTH_AVAIL; [ 59s] if (strEQ(name, "HTTP_CODE")) return CURLINFO_HTTP_CODE; [ 59s] if (strEQ(name, "HTTP_CONNECTCODE")) return CURLINFO_HTTP_CONNECTCODE; [ 59s] + if (strEQ(name, "HTTP_VERSION")) return CURLINFO_HTTP_VERSION; [ 59s] break; [ 59s] case 'I': [ 59s] case 'J': [ 59s] @@ -131,6 +132,7 @@ [ 59s] if (strEQ(name, "CONNECTTIMEOUT")) return CURLOPT_CONNECTTIMEOUT; [ 59s] if (strEQ(name, "CONNECTTIMEOUT_MS")) return CURLOPT_CONNECTTIMEOUT_MS; [ 59s] if (strEQ(name, "CONNECT_ONLY")) return CURLOPT_CONNECT_ONLY; [ 59s] + if (strEQ(name, "CONNECT_TO")) return CURLOPT_CONNECT_TO; [ 59s] if (strEQ(name, "CONV_FROM_NETWORK_FUNCTION")) return CURLOPT_CONV_FROM_NETWORK_FUNCTION; [ 59s] if (strEQ(name, "CONV_FROM_UTF8_FUNCTION")) return CURLOPT_CONV_FROM_UTF8_FUNCTION; [ 59s] if (strEQ(name, "CONV_TO_NETWORK_FUNCTION")) return CURLOPT_CONV_TO_NETWORK_FUNCTION; [ 59s] @@ -353,6 +355,7 @@ [ 59s] if (strEQ(name, "STREAM_WEIGHT")) return CURLOPT_STREAM_WEIGHT; [ 59s] break; [ 59s] case 'T': [ 59s] + if (strEQ(name, "TCP_FASTOPEN")) return CURLOPT_TCP_FASTOPEN; [ 59s] if (strEQ(name, "TCP_KEEPALIVE")) return CURLOPT_TCP_KEEPALIVE; [ 59s] if (strEQ(name, "TCP_KEEPIDLE")) return CURLOPT_TCP_KEEPIDLE; [ 59s] if (strEQ(name, "TCP_KEEPINTVL")) return CURLOPT_TCP_KEEPINTVL; [ 59s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 59s] ... saving built statistics [ 59s] ... saving built packages [ 59s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-5.9.armv7l.rpm [ 59s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-5.9.armv7l.rpm [ 59s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-5.9.armv7l.rpm [ 59s] /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-5.9.src.rpm [ 59s] /home/abuild/rpmbuild/OTHER/_statistics [ 59s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 59s] [ 59s] w32 finished "build perl-WWW-Curl.spec" at Wed Sep 28 16:44:53 UTC 2016. [ 59s] [ 62s] [ 53.034633] SysRq : Power Off [ 62s] [ 53.146213] Power down. [ 62s] build: extracting built packages... [ 63s] perl-WWW-Curl-4.05-5.9.armv7l.rpm [ 63s] perl-WWW-Curl-debuginfo-4.05-5.9.armv7l.rpm [ 63s] perl-WWW-Curl-debugsource-4.05-5.9.armv7l.rpm [ 63s] perl-WWW-Curl-4.05-5.9.src.rpm [ 63s] _statistics [ 63s] rpmlint.log Retried build at Fri Sep 30 22:33:06 2016 returned same result, skipped Retried build at Tue Oct 4 04:47:07 2016 returned same result, skipped Retried build at Tue Oct 4 12:48:43 2016 returned same result, skipped Retried build at Fri Oct 7 03:58:20 2016 returned same result, skipped Retried build at Wed Oct 12 08:46:58 2016 returned same result, skipped Retried build at Sun Oct 16 00:10:07 2016 returned same result, skipped