[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w36 started "build _service:gbs:org.tizen.screen-reader.spec" at Wed Oct 19 16:03:24 UTC 2016. [ 0s] [ 0s] Building screen-reader for project 'Tizen:Common' repository 'arm-wayland' arch 'armv7l' srcmd5 '8605d39ab8f1e61e3bcafce856783ba0' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:org.tizen.screen-reader.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:org.tizen.screen-reader.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:org.tizen.screen-reader.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-armv7l... [ 4s] [25/40] preinstalling qemu-linux-user-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 5s] [35/40] preinstalling tar... [ 5s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 6s] [ 6s] [1/9] preinstalling libext2fs... [ 6s] [2/9] preinstalling libpcre... [ 6s] [3/9] preinstalling libsmartcols... [ 6s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 6s] [6/9] preinstalling grep... [ 6s] [7/9] preinstalling libblkid... [ 6s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 7s] copying packages... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: nss -> libsoftokn3 [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] cycle: bluetooth-tools -> bluetooth-tools-no-firmware [ 8s] breaking dependency bluetooth-tools-no-firmware -> bluetooth-tools [ 8s] cycle: vconf-compat -> buxton2 [ 8s] breaking dependency buxton2 -> vconf-compat [ 8s] cycle: efl -> ecore [ 8s] breaking dependency ecore -> efl [ 8s] cycle: efl -> ecore -> ector [ 8s] breaking dependency ecore -> ector [ 8s] cycle: efl -> ecore -> eet [ 8s] breaking dependency ecore -> eet [ 8s] cycle: efl -> ecore -> eeze [ 8s] breaking dependency ecore -> eeze [ 8s] cycle: efl -> ecore -> eina [ 8s] breaking dependency ecore -> eina [ 8s] cycle: efl -> ecore -> eldbus [ 8s] breaking dependency ecore -> eldbus [ 8s] cycle: efl -> ecore -> emile [ 8s] breaking dependency efl -> ecore [ 8s] cycle: efl -> eina [ 8s] breaking dependency efl -> eina [ 8s] cycle: efl -> eo [ 8s] breaking dependency eo -> efl [ 8s] cycle: efl -> eo -> eina [ 8s] breaking dependency eo -> eina [ 8s] cycle: libsensord -> sensord [ 8s] breaking dependency libsensord -> sensord [ 8s] cycle: ecore -> evas [ 8s] breaking dependency evas -> ecore [ 8s] cycle: libalarm -> alarm-server [ 8s] breaking dependency alarm-server -> libalarm [ 8s] cycle: syspopup -> syspopup-caller [ 8s] breaking dependency syspopup -> syspopup-caller [ 8s] cycle: libdpm -> device-policy-manager [ 8s] breaking dependency device-policy-manager -> libdpm [ 8s] cycle: ecore-devel -> eeze-devel [ 8s] breaking dependency ecore-devel -> eeze-devel [ 8s] cycle: ecore-devel -> eldbus-devel [ 8s] breaking dependency ecore-devel -> eldbus-devel [ 8s] done [ 8s] booting kvm ... [ 8s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 11s] Waiting for device /dev/vda to appear: ok [ 11s] fsck from util-linux 2.21.2 [ 11s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 11s] /dev/vda: clean, 5442/2392064 files, 250611/9568256 blocks [ 11s] fsck succeeded. Mounting root device read-write. [ 11s] Mounting root /dev/vda [ 11s] mount -o rw -t ext4 /dev/vda /root [ 11s] replacing /etc/mtab with symlink to /proc/self/mounts [ 12s] 2nd stage started in virtual machine [ 12s] machine type: armv7l [ 12s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 12s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 12s] swapon /dev/vdb [ 12s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 12s] mount: none is already mounted or /proc busy [ 12s] mount: none is already mounted or /dev/pts busy [ 12s] logging output to //.build.log... [ 12s] processing specfile /.build-srcdir/_service:gbs:org.tizen.screen-reader.spec ... [ 12s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:org.tizen.screen-reader.spec build rpmlint-Factory ... [ 12s] running qemu-linux-user-cross postinstall script [ 12s] running qemu-accel-armv7l postinstall script [ 12s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 12s] running setup postinstall script [ 12s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 12s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 12s] initializing rpm db... [ 14s] [1/313] installing default-ac-domains-0.1-14.1 [ 14s] [2/313] installing libmagic-data-5.28-4.1 [ 14s] [3/313] installing setup-0.9-3.6 [ 14s] [4/313] installing terminfo-base-5.9-1.17 [ 14s] [5/313] installing typelib-1_0-Atspi-2_0-2.16.1-13.1 [ 14s] [6/313] installing filesystem-3.1-10.1 [ 14s] [7/313] installing glibc-2.20-12.1 [ 15s] [8/313] installing libatomic-4.9.2-15.1 [ 15s] [9/313] installing libgcc-4.9.2-15.1 [ 15s] [10/313] installing libgomp-4.9.2-15.1 [ 15s] [11/313] installing bash-3.2.57-3.4 [ 15s] [12/313] installing capi-base-common-0.4.11-24.1 [ 15s] [13/313] installing check-0.9.8-6.11 [ 15s] [14/313] installing cpio-2.11-2.1 [ 15s] [15/313] installing diffutils-3.3-1.13 [ 15s] [16/313] installing findutils-4.3.8-3.1 [ 15s] [17/313] installing fribidi-0.19.7-6.1 [ 15s] [18/313] installing gdbm-1.8.3-2.9 [ 15s] [19/313] installing giflib-5.1.2-12.1 [ 15s] [20/313] installing hostname-3.12-1.8 [ 15s] [21/313] installing iniparser-3.1-9.8 [ 16s] [22/313] installing libattr-2.4.47-1.16 [ 16s] [23/313] installing libbz2-1.0.6-2.7 [ 16s] [24/313] installing libcap-2.24-1.91 [ 16s] [25/313] installing libdrm-2.4.58-18.1 [ 16s] [26/313] installing libelf-0.153-5.28 [ 16s] [27/313] installing libelf0-0.8.13-1.14 [ 16s] [28/313] installing libevdev-1.2.2-8.5 [ 16s] [29/313] installing libexpat-2.1.1-2.5 [ 16s] [30/313] installing libext2fs-1.42.13-2.8 [ 16s] [31/313] installing libffi-3.1-2.5 [ 16s] [32/313] installing libfreebl3-3.23-4.46 [ 16s] [33/313] installing libhyphen-2.8.8-2.4 [ 17s] [34/313] installing libitm-4.9.2-15.1 [ 17s] [35/313] installing libjpeg-8.0.2-10.5 [ 17s] [36/313] installing libjson-0.12-9.1 [ 17s] [37/313] installing libltdl-2.4.2-3.5 [ 17s] [38/313] installing liblua-5.1.4-1.18 [ 17s] [39/313] installing liblzma-5.1.3-3.1 [ 17s] [40/313] installing libmtdev-1.1.5-7.1 [ 17s] [41/313] installing libogg-1.3.2-6.4 [ 17s] [42/313] installing libpcre-8.39-3.1 [ 17s] [43/313] installing libpopt-1.16-2.7 [ 17s] [44/313] installing libpython-2.7.8-3.6 [ 18s] [45/313] installing libsmack-1.2.0-4.4 [ 18s] [46/313] installing libsmartcols-2.28-8.1 [ 18s] [47/313] installing libsqlite-3.8.10.2-1.15 [ 18s] [48/313] installing libstdc++-4.9.2-15.1 [ 18s] [49/313] installing libtremolo-0.0.11-4.11 [ 18s] [50/313] installing libuuid-2.28-8.1 [ 18s] [51/313] installing libwayland-egl-1.0-24.1 [ 18s] [52/313] installing libxkbcommon-0.4.3-12.1 [ 18s] [53/313] installing m4-1.4.17-1.8 [ 18s] [54/313] installing net-tools-2.0_20121208git-1.11 [ 18s] [55/313] installing nspr-4.12-4.16 [ 18s] [56/313] installing patch-2.7-1.10 [ 18s] [57/313] installing pixman-0.32.6-5.17 [ 19s] [58/313] installing pkg-config-0.28-1.13 [ 19s] [59/313] installing rfkill-0.4-8.6 [ 19s] [60/313] installing sed-4.1c-2.6 [ 19s] [61/313] installing update-alternatives-1.16.3-1.8 [ 19s] [62/313] installing which-2.20-1.8 [ 19s] [63/313] installing xdgmime-0.0.12-10.4 [ 19s] [64/313] installing zlib-1.2.8-1.17 [ 19s] [65/313] installing libncurses-5.9-1.17 [ 19s] [66/313] installing shadow-utils-4.1.4.2-2.1 [ 19s] [67/313] installing build-compare-2015.04.28-4.10 [ 19s] [68/313] installing libstdc++-devel-4.9.2-15.1 [ 19s] [69/313] installing qemu-linux-user-cross-2.7.0-1.1 [ 20s] [70/313] installing capi-base-common-devel-0.4.11-24.1 [ 21s] [71/313] installing cpp-4.9.2-15.1 [ 21s] [72/313] installing fribidi-devel-0.19.7-6.1 [ 21s] [73/313] installing gcc-c++-4.9.2-15.1 [ 22s] [74/313] installing libuuid-devel-2.28-8.1 [ 22s] [75/313] installing libxkbcommon-devel-0.4.3-12.1 [ 22s] [76/313] installing pkgmgr-0.2.89-81.1 [ 22s] /var/tmp/rpm-tmp.ybUGgb: line 9: /etc/tizen-platform.conf: No such file or directory [ 22s] warning: %post(pkgmgr-0.2.89-81.1.armv7l) scriptlet failed, exit status 1 [ 22s] [77/313] installing xdgmime-devel-0.0.12-10.4 [ 22s] [78/313] installing binutils-2.25-6.10 [ 22s] [79/313] installing coregl-0.1.10-13.2 [ 22s] [80/313] installing coreutils-6.9-8.1 [ 23s] [81/313] installing db4-4.8.30.NC-2.1 [ 23s] [82/313] installing gawk-3.1.5-2.11 [ 23s] [83/313] installing grep-2.5.2-2.11 [ 23s] [84/313] installing less-466-1.11 [ 23s] [85/313] installing libacl-2.2.52-3.5 [ 23s] [86/313] installing libasm-0.153-5.28 [ 23s] [87/313] installing libblkid-2.28-8.1 [ 23s] [88/313] installing libcap-tools-2.24-1.91 [ 23s] [89/313] installing libglib-2.44.1-22.1 [ 23s] [90/313] installing libkms-2.4.58-18.1 [ 23s] [91/313] installing libopenssl-1.0.2j-10.1 [ 23s] [92/313] installing libpcreposix-8.39-3.1 [ 24s] [93/313] installing libpng-1.6.21-9.1 [ 24s] [94/313] installing libreadline-5.2-2.6 [ 24s] [95/313] installing libubsan-4.9.2-15.1 [ 24s] [96/313] installing libvorbis-1.3.4-8.8 [ 24s] [97/313] installing libwayland-client-1.10.0-19.4 [ 24s] [98/313] installing libwayland-server-1.10.0-19.4 [ 24s] [99/313] installing make-4.0-1.10 [ 24s] [100/313] installing nss-certs-3.23-4.46 [ 24s] [101/313] installing psmisc-22.21-7.13 [ 24s] [102/313] installing smack-1.2.0-4.4 [ 24s] [103/313] installing bzip2-1.0.6-2.7 [ 24s] [104/313] installing gettext-runtime-0.19.7-2.6 [ 24s] [105/313] installing libicu-57.1-12.1 [ 25s] [106/313] installing libkmod-18-6.4 [ 25s] [107/313] installing libmagic-5.28-4.1 [ 25s] [108/313] installing libpcrecpp-8.39-3.1 [ 26s] [109/313] installing libxml2-2.9.4-5.4 [ 26s] [110/313] installing xz-5.1.3-3.1 [ 26s] [111/313] installing cynara-db-migration-0.14.5-33.2 [ 26s] [112/313] installing libdw-0.153-5.28 [ 26s] [113/313] installing libtiff-4.0.6-8.9 [ 26s] [114/313] installing ttrace-1.0.0-25.1 [ 26s] [115/313] installing libicu-devel-57.1-12.1 [ 26s] [116/313] installing libwayland-extension-client-1.0.53-39.1 [ 26s] [117/313] installing linux-glibc-devel-3.10-1.3 [ 26s] [118/313] installing vconf-internal-keys-devel-0.0.159-68.1 [ 27s] [119/313] installing file-5.28-4.1 [ 27s] [120/313] installing glibc-locale-2.20-12.1 [ 27s] [121/313] installing libblkid-devel-2.28-8.1 [ 27s] [122/313] installing libgmodule-2.44.1-22.1 [ 27s] [123/313] installing libgthread-2.44.1-22.1 [ 27s] [124/313] installing libmount-2.28-8.1 [ 27s] [125/313] installing libwayland-cursor-1.10.0-19.4 [ 27s] [126/313] installing openssl-1.0.2j-10.1 [ 27s] [127/313] installing security-config-1.0-49.1 [ 34s] usermod: user 'buxton' does not exist [ 34s] usermod: user 'dbus' does not exist [ 34s] [128/313] installing tar-1.17-2.8 [ 34s] [129/313] installing tizen-platform-config-2.0-41.2 [ 35s] [130/313] installing gzip-1.3.12-2.14 [ 35s] [131/313] installing libfdisk1-2.28-8.1 [ 35s] [132/313] installing libfreetype-2.6.5-8.1 [ 35s] [133/313] installing libgobject-2.44.1-22.1 [ 35s] [134/313] installing libsndfile-1.0.26-9.1 [ 35s] [135/313] installing lua-5.1.4-1.18 [ 35s] [136/313] installing pam-1.1.6-4.5 [ 35s] [137/313] installing perl-5.20.0-3.63 [ 37s] [138/313] installing tzdata-2016f-2.2 [ 37s] [139/313] installing pcre-devel-8.39-3.1 [ 37s] [140/313] installing elfutils-0.153-5.28 [ 37s] [141/313] installing gcc-4.9.2-15.1 [ 37s] [142/313] installing libcynara-commons-0.14.5-33.2 [ 38s] [143/313] installing shared-mime-info-1.3-2.6 [ 43s] [144/313] installing libarchive-3.1.2-1.19 [ 43s] [145/313] installing python-2.7.8-3.6 [ 44s] [146/313] installing build-mkbaselibs-20120927-1.3 [ 44s] [147/313] installing glibc-devel-2.20-12.1 [ 44s] [148/313] installing qemu-accel-armv7l-0.4-9.7 [ 47s] [149/313] installing autoconf-2.69-1.5 [ 48s] [150/313] installing libmount-devel-2.28-8.1 [ 48s] [151/313] installing libtzplatform-config-2.0-41.2 [ 48s] [152/313] installing lua-devel-5.1.4-1.18 [ 48s] [153/313] installing libcynara-client-0.14.5-33.2 [ 48s] [154/313] installing libcynara-creds-commons-0.14.5-33.2 [ 48s] [155/313] installing libcynara-session-0.14.5-33.2 [ 48s] [156/313] installing libdrm-devel-2.4.58-18.1 [ 48s] [157/313] installing python-xml-2.7.8-3.6 [ 48s] [158/313] installing gettext-tools-0.19.7-2.6 [ 48s] [159/313] installing libsystemd-219-47.1 [ 49s] [160/313] installing libharfbuzz-1.3.0-10.1 [ 49s] [161/313] installing cmake-2.8.12.2-3.1 [ 49s] [162/313] installing fontconfig-2.12.1-14.1 [ 51s] [163/313] installing wayland-devel-1.10.0-19.4 [ 51s] [164/313] installing util-linux-2.28-8.1 [ 52s] [165/313] installing systemd-219-47.1 [ 52s] [166/313] installing libtzplatform-config-devel-2.0-41.2 [ 52s] [167/313] installing check-devel-0.9.8-6.11 [ 52s] [168/313] installing systemd-devel-219-47.1 [ 52s] [169/313] installing tizen-platform-config-tools-2.0-41.2 [ 52s] [170/313] installing wayland-extension-client-devel-1.0.53-39.1 [ 53s] [171/313] installing zlib-devel-1.2.8-1.17 [ 53s] [172/313] installing automake-1.14.1-1.4 [ 53s] [173/313] installing dbus-libs-1.10.6-40.1 [ 53s] [174/313] installing libsndfile-devel-1.0.26-9.1 [ 53s] [175/313] installing util-linux-su-2.28-8.1 [ 53s] [176/313] installing build-20120927-1.3 [ 53s] [177/313] installing libcynara-creds-socket-0.14.5-33.2 [ 53s] [178/313] installing libdlog-0.5.1-43.1 [ 53s] [179/313] installing libinput-0.11.0-17.1 [ 53s] [180/313] installing dbus-devel-1.10.6-40.1 [ 54s] [181/313] installing libdlog-devel-0.5.1-43.1 [ 54s] [182/313] installing libinput-devel-0.11.0-17.1 [ 54s] [183/313] installing libtracker-1.0.1-6.1 [ 54s] [184/313] installing libmm-session-0.2.9-10.10 [ 54s] [185/313] installing libopenssl-devel-1.0.2j-10.1 [ 54s] [186/313] installing libtool-2.4.2-3.5 [ 54s] [187/313] installing libatspi0-2.16.1-13.1 [ 54s] [188/313] installing libslp-db-util-0.1.1-7.9 [ 54s] [189/313] installing libpng-devel-1.6.21-9.1 [ 54s] [190/313] installing libpulse-5.0-47.1 [ 54s] [191/313] installing auth-fw-0.0.1-13.1 [ 55s] Failed to get D-Bus connection: Operation not permitted [ 55s] Failed to get D-Bus connection: Operation not permitted [ 55s] [192/313] installing libtbm-2.0.5-58.1 [ 55s] [193/313] installing capi-system-info-0.2.0-27.1 [ 55s] [194/313] installing dbus-1.10.6-40.1 [ 55s] [195/313] installing libtbm-devel-2.0.5-58.1 [ 55s] [196/313] installing libauth-fw-client-admin-0.0.1-13.1 [ 55s] [197/313] installing libpulse-mainloop-glib-5.0-47.1 [ 55s] [198/313] installing freetype2-devel-2.6.5-8.1 [ 56s] [199/313] installing libwayland-tbm-client-0.1.9-30.1 [ 56s] [200/313] installing libwayland-tbm-server-0.1.9-30.1 [ 56s] [201/313] installing libtdm-1.4.4-45.1 [ 56s] [202/313] installing fontconfig-devel-2.12.1-14.1 [ 56s] [203/313] installing libtdm-devel-1.4.4-45.1 [ 56s] [204/313] installing libgbm-1.0-6.4 [ 56s] [205/313] installing libgbm-devel-1.0-6.4 [ 56s] [206/313] installing bluetooth-tools-no-firmware-0.2.37-22.1 [ 56s] [207/313] installing eo-1.16.0-124.1 [ 56s] [208/313] installing nss-3.23-4.46 [ 57s] [209/313] installing libgio-2.44.1-22.1 [ 57s] [210/313] installing gio-branding-upstream-2.44.1-22.1 [ 57s] [211/313] installing bluetooth-tools-0.2.37-22.1 [ 57s] [212/313] installing libjson-glib-1.2.0-9.2 [ 57s] [213/313] installing efl-1.16.0-124.1 [ 57s] [214/313] installing libsoftokn3-3.23-4.46 [ 57s] [215/313] installing glib2-tools-2.44.1-22.1 [ 57s] [216/313] installing rpm-4.11.0.1-9.2 [ 57s] [217/313] installing buxton2-1.1-38.1 [ 59s] warning: user buxton does not exist - using root [ 59s] warning: group buxton does not exist - using root [ 59s] warning: user buxton does not exist - using root [ 59s] warning: group buxton does not exist - using root [ 59s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 59s] /etc/buxton2/*: No such file or directory [ 59s] [218/313] installing rpmlint-mini-1.5-3.27 [ 59s] [219/313] installing bundle-0.1.31-18.2 [ 59s] [220/313] installing eina-1.16.0-124.1 [ 59s] [221/313] installing vconf-compat-1.1-38.1 [ 59s] [222/313] installing glib2-devel-2.44.1-22.1 [ 59s] [223/313] installing rpm-build-4.11.0.1-9.2 [ 59s] [224/313] installing rpmlint-tizen-1.0-1.3 [ 59s] [225/313] installing bundle-devel-0.1.31-18.2 [ 59s] [226/313] installing eina-devel-1.16.0-124.1 [ 60s] [227/313] installing embryo-1.16.0-124.1 [ 60s] [228/313] installing harfbuzz-devel-1.3.0-10.1 [ 60s] [229/313] installing libpulse-devel-5.0-47.1 [ 60s] [230/313] installing vconf-compat-devel-1.1-38.1 [ 60s] [231/313] installing ector-1.16.0-124.1 [ 60s] [232/313] installing eventsystem-0.0.1-9.1 [ 60s] [233/313] installing emile-1.16.0-124.1 [ 60s] [234/313] installing libnet-client-1.1.56-27.1 [ 60s] [235/313] installing libtapi-0.8.5-17.1 [ 60s] [236/313] installing capi-system-device-0.1.0-32.1 [ 61s] [237/313] installing pkgmgr-info-0.1.1-82.1 [ 61s] [238/313] installing libsensord-2.0.8-25.1 [ 61s] [239/313] installing libmm-sound-0.10.58-51.1 [ 61s] [240/313] installing capi-system-device-devel-0.1.0-32.1 [ 61s] [241/313] installing embryo-devel-1.16.0-124.1 [ 61s] [242/313] installing eo-devel-1.16.0-124.1 [ 61s] [243/313] installing libtapi-devel-0.8.5-17.1 [ 61s] [244/313] installing capi-system-sensor-0.2.3-25.1 [ 61s] [245/313] installing emile-devel-1.16.0-124.1 [ 61s] [246/313] installing libsensord-devel-2.0.8-25.1 [ 61s] [247/313] installing security-privilege-manager-0.0.5-34.1 [ 62s] [248/313] installing eet-1.16.0-124.1 [ 62s] [249/313] installing pkgmgr-installer-0.2.89-81.1 [ 62s] [250/313] installing capi-network-wifi-1.0.82-31.1 [ 62s] [251/313] installing pkgmgr-client-0.2.89-81.1 [ 62s] [252/313] installing capi-media-sound-manager-0.3.72-30.1 [ 62s] [253/313] installing sensord-2.0.8-25.1 [ 62s] Failed to get D-Bus connection: Operation not permitted [ 62s] warning: %post(sensord-2.0.8-25.1.armv7l) scriptlet failed, exit status 1 [ 62s] [254/313] installing aul-0.0.302-101.1 [ 62s] [255/313] installing capi-media-sound-manager-devel-0.3.72-30.1 [ 63s] [256/313] installing capi-network-wifi-devel-1.0.82-31.1 [ 63s] [257/313] installing efl-devel-1.16.0-124.1 [ 63s] [258/313] installing eet-devel-1.16.0-124.1 [ 63s] [259/313] installing capi-media-wav-player-0.1.22-13.1 [ 63s] [260/313] installing aul-devel-0.0.302-101.1 [ 63s] [261/313] installing capi-appfw-app-manager-0.2.4-38.1 [ 63s] [262/313] installing app-core-common-1.2-30.2 [ 63s] [263/313] installing capi-appfw-package-manager-0.0.30-33.2 [ 63s] [264/313] installing evas-1.16.0-124.1 [ 63s] [265/313] installing capi-media-wav-player-devel-0.1.22-13.1 [ 64s] [266/313] installing ector-devel-1.16.0-124.1 [ 64s] [267/313] installing liblbs-location-1.3.4-20.1 [ 64s] [268/313] installing ecore-1.16.0-124.1 [ 64s] [269/313] installing app-svc-0.1.53-14.3 [ 64s] [270/313] installing efreet-1.16.0-124.1 [ 64s] [271/313] installing eldbus-1.16.0-124.1 [ 64s] [272/313] installing eeze-1.16.0-124.1 [ 64s] [273/313] installing capi-location-manager-0.7.4-27.1 [ 65s] [274/313] installing eio-1.16.0-124.1 [ 65s] [275/313] installing evas-devel-1.16.0-124.1 [ 65s] [276/313] installing edje-1.16.0-124.1 [ 65s] [277/313] installing at-spi2-core-2.16.1-13.1 [ 65s] [278/313] installing alarm-server-0.4.178-36.2 [ 65s] [279/313] installing ecore-devel-1.16.0-124.1 [ 65s] [280/313] installing at-spi2-core-devel-2.16.1-13.1 [ 65s] [281/313] installing eldbus-devel-1.16.0-124.1 [ 65s] [282/313] installing efreet-devel-1.16.0-124.1 [ 65s] [283/313] installing eio-devel-1.16.0-124.1 [ 65s] [284/313] installing eeze-devel-1.16.0-124.1 [ 66s] [285/313] installing edje-tools-1.16.0-124.1 [ 66s] [286/313] installing libalarm-0.4.178-36.2 [ 66s] [287/313] installing emotion-1.16.0-124.1 [ 66s] [288/313] installing emotion-devel-1.16.0-124.1 [ 66s] [289/313] installing ethumb-1.16.0-124.1 [ 66s] [290/313] installing edje-devel-1.16.0-124.1 [ 66s] [291/313] installing ethumb-devel-1.16.0-124.1 [ 66s] [292/313] installing elementary-1.16.0-78.1 [ 66s] [293/313] installing capi-system-system-settings-0.0.2-23.1 [ 67s] [294/313] installing capi-ui-efl-util-0.3.8-29.1 [ 67s] [295/313] installing app-core-efl-1.2-30.2 [ 67s] [296/313] installing elementary-devel-1.16.0-78.1 [ 67s] [297/313] installing app-core-common-devel-1.2-30.2 [ 67s] [298/313] installing capi-appfw-application-0.1.0-46.1 [ 67s] [299/313] installing app-core-efl-devel-1.2-30.2 [ 67s] [300/313] installing capi-appfw-application-devel-0.1.0-46.1 [ 67s] [301/313] installing libkrate-0.0.1-7.6 [ 67s] [302/313] installing notification-0.2.41-61.2 [ 67s] [303/313] installing syspopup-0.0.100-24.1 [ 68s] [304/313] installing notification-devel-0.2.41-61.2 [ 68s] [305/313] installing bluetooth-frwk-0.2.152-78.1 [ 68s] [306/313] installing syspopup-caller-0.0.100-24.1 [ 68s] [307/313] installing capi-network-bluetooth-0.1.53-57.1 [ 68s] [308/313] installing capi-network-bluetooth-devel-0.1.53-57.1 [ 68s] [309/313] installing device-policy-manager-0.0.1-43.2 [ 68s] [310/313] installing libdpm-0.0.1-43.2 [ 68s] [311/313] installing capi-media-audio-io-0.3.44-27.1 [ 68s] [312/313] installing tts-0.2.44-36.2 [ 69s] [313/313] installing tts-devel-0.2.44-36.2 [ 69s] removing nis flags from //etc/nsswitch.conf... [ 69s] now finalizing build dir... [ 69s] qemu: Unsupported syscall: 311 [ 70s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 74s] build target is armv7l-tizen-linux [ 75s] ----------------------------------------------------------------- [ 75s] I have the following modifications for org.tizen.screen-reader.spec: [ 75s] 5c5 [ 75s] < Release: 1 [ 75s] --- [ 75s] > Release: 27.1 [ 75s] ----------------------------------------------------------------- [ 75s] ----- building org.tizen.screen-reader.spec (user abuild) [ 75s] ----------------------------------------------------------------- [ 75s] ----------------------------------------------------------------- [ 75s] Running qemu build hang workaround... [ 75s] /bin/ps command not found [ 75s] qemu: Unsupported syscall: 311 [ 75s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 75s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common/arm-wayland/8605d39ab8f1e61e3bcafce856783ba0-screen-reader' /home/abuild/rpmbuild/SOURCES/org.tizen.screen-reader.spec [ 75s] Building target platforms: armv7l-tizen-linux [ 75s] Building for target armv7l-tizen-linux [ 75s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OPQFsC [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + rm -rf org.tizen.screen-reader-0.0.8 [ 75s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/org.tizen.screen-reader-0.0.8.tar.gz [ 75s] + /bin/tar -xf - [ 75s] + STATUS=0 [ 75s] + '[' 0 -ne 0 ']' [ 75s] + cd org.tizen.screen-reader-0.0.8 [ 75s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 75s] + exit 0 [ 75s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.mLGQ7E [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd org.tizen.screen-reader-0.0.8 [ 75s] ++ uname -m [ 75s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 75s] + LANG=C [ 75s] + export LANG [ 75s] + unset DISPLAY [ 75s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 75s] + export CFLAGS [ 75s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 75s] + export CXXFLAGS [ 75s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 75s] + export FFLAGS [ 75s] + LDFLAGS= [ 75s] + export LDFLAGS [ 75s] + LD_AS_NEEDED=1 [ 75s] + export LD_AS_NEEDED [ 75s] + rm -rf CMakeFiles CMakeCache.txt [ 75s] + export SEC_FEATURE_TAPI_ENABLE=1 [ 75s] + SEC_FEATURE_TAPI_ENABLE=1 [ 75s] + export 'CFLAGS+= -DELM_ACCESS_KEYBOARD' [ 75s] + CFLAGS+=' -DELM_ACCESS_KEYBOARD' [ 75s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr/apps/org.tizen.screen-reader -DCMAKE_TARGET=screen-reader -DCMAKE_PACKAGE=org.tizen.screen-reader -DTZ_SYS_RO_APP=/usr/apps -DTZ_SYS_RO_PACKAGES=/usr/share/packages -DSEC_FEATURE_TAPI_ENABLE=1 [ 75s] -- The C compiler identification is GNU 4.9.2 [ 75s] -- The CXX compiler identification is GNU 4.9.2 [ 75s] -- Check for working C compiler: /usr/bin/cc [ 75s] -- Check for working C compiler: /usr/bin/cc -- works [ 75s] -- Detecting C compiler ABI info [ 75s] -- Detecting C compiler ABI info - done [ 75s] -- Check for working CXX compiler: /usr/bin/c++ [ 75s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 75s] -- Detecting CXX compiler ABI info [ 76s] -- Detecting CXX compiler ABI info - done [ 76s] SEC_FEATURE_TAPI_ENABLE: 1 [ 76s] -- X11 is disabled - using wayland [ 76s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 76s] -- checking for modules 'bundle;appcore-efl;eldbus;elementary;ecore;atspi-2;gobject-2.0;dlog;vconf;tts;capi-media-wav-player;capi-system-device;capi-network-bluetooth;notification;capi-network-wifi;tapi;ecore-wayland' [ 77s] -- found bundle, version 0.1.31 [ 77s] -- found appcore-efl, version 1.1 [ 77s] -- found eldbus, version 1.16.0 [ 77s] -- found elementary, version 1.16.0 [ 77s] -- found ecore, version 1.16.0 [ 78s] -- found atspi-2, version 2.16.0 [ 78s] -- found gobject-2.0, version 2.44.1 [ 78s] -- found dlog, version 1.0 [ 78s] -- found vconf, version 0.3.1 [ 78s] -- found tts, version 0.2.44 [ 78s] -- found capi-media-wav-player, version 0.0.1 [ 79s] -- found capi-system-device, version [ 79s] -- found capi-network-bluetooth, version [ 79s] -- found notification, version 0.1.0 [ 79s] -- found capi-network-wifi, version [ 79s] -- found tapi, version 0.1 [ 79s] -- found ecore-wayland, version 1.16.0 [ 82s] -- po files --- [ 82s] PO: /home/abuild/rpmbuild/BUILD/org.tizen.screen-reader-0.0.8/res/po/en_US.po [ 82s] CMake Warning (dev) at CMakeLists.txt:95 (ADD_SUBDIRECTORY): [ 82s] The source directory [ 82s] [ 82s] /home/abuild/rpmbuild/BUILD/org.tizen.screen-reader-0.0.8/res/sounds [ 82s] [ 82s] does not contain a CMakeLists.txt file. [ 82s] [ 82s] CMake does not support this case but it used to work accidentally and is [ 82s] being allowed for compatibility. [ 82s] [ 82s] Policy CMP0014 is not set: Input directories must have CMakeLists.txt. Run [ 82s] "cmake --help-policy CMP0014" for policy details. Use the cmake_policy [ 82s] command to set the policy and suppress this warning. [ 82s] This warning is for project developers. Use -Wno-dev to suppress it. [ 82s] [ 82s] -- checking for modules 'gobject-2.0;dlog;dbus-1;ecore;eldbus;eina;tts;check;vconf;elementary;capi-media-wav-player;capi-system-device' [ 83s] -- found gobject-2.0, version 2.44.1 [ 83s] -- found dlog, version 1.0 [ 83s] -- found dbus-1, version 1.10.6 [ 83s] -- found ecore, version 1.16.0 [ 84s] -- found eldbus, version 1.16.0 [ 84s] -- found eina, version 1.16.0 [ 84s] -- found tts, version 0.2.44 [ 84s] -- found check, version 0.9.8 [ 84s] -- found vconf, version 0.3.1 [ 85s] -- found elementary, version 1.16.0 [ 85s] -- found capi-media-wav-player, version 0.0.1 [ 85s] -- found capi-system-device, version [ 87s] -- Configuring done [ 87s] -- Generating done [ 87s] CMake Warning: [ 87s] Manually-specified variables were not used by the project: [ 87s] [ 87s] CMAKE_PACKAGE [ 87s] CMAKE_TARGET [ 87s] [ 87s] [ 87s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/org.tizen.screen-reader-0.0.8 [ 87s] + make -j4 [ 87s] + sed -e 's%^.*: error: .*$%\x1b[37;41m&\x1b[m%' -e 's%^.*: warning: .*$%\x1b[30;43m&\x1b[m%' [ 91s] Scanning dependencies of target po [ 91s] Scanning dependencies of target atspi [ 91s] [ 3%] [ 7%] Scanning dependencies of target screen-reader [ 91s] Generating en_US.mo [ 91s] Building C object tests/CMakeFiles/atspi.dir/atspi/atspi.c.o [ 91s] [ 10%] [ 14%] [ 14%] Built target po [ 91s] Building C object CMakeFiles/screen-reader.dir/src/flat_navi.c.o [ 91s] [ 17%] Building C object CMakeFiles/screen-reader.dir/src/app_tracker.c.o [ 91s] Building C object CMakeFiles/screen-reader.dir/src/main.c.o [ 91s] Linking C static library libatspi.a [ 91s] [ 17%] Built target atspi [ 91s] Scanning dependencies of target smart_navi_test_suite [ 91s] [ 21%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/smart_navi_suite.c.o [ 91s] [ 25%] Building C object CMakeFiles/screen-reader.dir/src/screen_reader.c.o [ 91s] [ 28%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/screen_reader.c.o [ 91s] [ 32%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/screen_reader_vconf.c.o [ 91s] [ 35%] Building C object CMakeFiles/screen-reader.dir/src/screen_reader_haptic.c.o [ 91s] [ 39%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/screen_reader_spi.c.o [ 91s] [ 42%] Building C object CMakeFiles/screen-reader.dir/src/screen_reader_spi.c.o [ 91s] [ 46%] Building C object CMakeFiles/screen-reader.dir/src/screen_reader_switch.c.o [ 91s] [ 50%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/screen_reader_tts.c.o [ 91s] [ 53%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/dbus_direct_reading_adapter.c.o [ 91s] [ 57%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/screen_reader_haptic.c.o [ 91s] [ 60%] Building C object CMakeFiles/screen-reader.dir/src/screen_reader_system.c.o [ 91s] [ 64%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/smart_notification.c.o [ 91s] [ 67%] Building C object CMakeFiles/screen-reader.dir/src/screen_reader_tts.c.o [ 91s] [ 71%] Building C object tests/CMakeFiles/smart_navi_test_suite.dir/__/src/flat_navi.c.o [ 91s] [ 75%] Building C object CMakeFiles/screen-reader.dir/src/screen_reader_vconf.c.o [ 91s] [ 78%] Building C object CMakeFiles/screen-reader.dir/src/smart_notification.c.o [ 91s] Linking C executable smart_navi_test_suite [ 91s] [ 82%] Building C object CMakeFiles/screen-reader.dir/src/keyboard_tracker.c.o [ 91s] [ 85%] Building C object CMakeFiles/screen-reader.dir/src/dbus_direct_reading_adapter.c.o [ 91s] [ 89%] Building C object CMakeFiles/screen-reader.dir/src/dbus_gesture_adapter.c.o [ 91s] [ 89%] Built target smart_navi_test_suite [ 91s] [ 92%] Building C object CMakeFiles/screen-reader.dir/src/elm_access_adapter.c.o [ 91s] [ 96%] Building C object CMakeFiles/screen-reader.dir/src/navigator.c.o [ 91s] [100%] Building C object CMakeFiles/screen-reader.dir/src/window_tracker.c.o [ 91s] Linking C executable screen-reader [ 91s] [100%] Built target screen-reader [ 91s] + export LD_LIBRARY_PATH=/emul/ia32-linux/lib:/emul/ia32-linux/usr/lib: [ 91s] + LD_LIBRARY_PATH=/emul/ia32-linux/lib:/emul/ia32-linux/usr/lib: [ 91s] + export CTEST_OUTPUT_ON_FAILURE=1 [ 91s] + CTEST_OUTPUT_ON_FAILURE=1 [ 91s] + make test [ 91s] Running tests... [ 91s] Test project /home/abuild/rpmbuild/BUILD/org.tizen.screen-reader-0.0.8 [ 91s] Start 1: smart_navi_tests [ 92s] 1/1 Test #1: smart_navi_tests ................. Passed 0.91 sec [ 92s] [ 92s] 100% tests passed, 0 tests failed out of 1 [ 92s] [ 92s] Total Test time (real) = 0.91 sec [ 92s] + exit 0 [ 92s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.IFMuBI [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd org.tizen.screen-reader-0.0.8 [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm [ 92s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm install [ 92s] [ 60%] Built target screen-reader [ 92s] [ 64%] Built target po [ 92s] [ 67%] Built target atspi [ 92s] [100%] Built target smart_navi_test_suite [ 92s] Install the project... [ 92s] -- Install configuration: "" [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/bin/screen-reader [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/icons [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/icons/screen-reader.png [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/CMakeFiles [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/CMakeFiles/CMakeDirectoryInformation.cmake [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/CMakeFiles/progress.marks [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/CTestTestfile.cmake [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/Makefile [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/clicked.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/cmake_install.cmake [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/contextual_menu.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/focus_actionable.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/focus_general.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/long_clicked.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/not_available.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/screen_off.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/scroll.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/scrollable_enter.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/scrollable_exit.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/sounds/window_state_changed.ogg [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/share/packages/org.tizen.screen-reader.xml [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/res/locale/en_US/LC_MESSAGES/screen-reader.mo [ 92s] + rm -f /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/share/info/dir [ 92s] + xargs rm -f -- [ 92s] + find /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm -regex '.*\.la$' [ 92s] + find /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm -regex '.*\.a$' [ 92s] + xargs rm -f -- [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/share/upgrade/scripts [ 92s] + cp -f scripts/screen-reader_upgrade.sh /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/share/upgrade/scripts [ 92s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/org.tizen.screen-reader-0.0.8 [ 92s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm/usr/apps/org.tizen.screen-reader/bin/screen-reader [ 92s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 92s] 525 blocks [ 92s] + /usr/lib/rpm/check-buildroot [ 92s] + /usr/lib/rpm//brp-compress [ 92s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 92s] + /usr/lib/rpm/brp-python-hardlink [ 92s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm [ 93s] Processing files: org.tizen.screen-reader-0.0.8-27.1.armv7l [ 93s] Aptk: PG1hbmlmZXN0PgogICA8cmVxdWVzdD4KICAgICAgPGRvbWFpbiBuYW1lPSJfIi8+ [ 93s] CiAgIDwvcmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 93s] [ 93s] Provides: org.tizen.screen-reader = 0.0.8-27.1 org.tizen.screen-reader(armv7l-32) = 0.0.8-27.1 [ 93s] Requires(interp): /bin/sh /sbin/ldconfig [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Requires(post): /bin/sh [ 93s] Requires(postun): /sbin/ldconfig [ 93s] Requires: /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libSLP-tapi.so.0 libappcore-efl.so.1 libatspi.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libcapi-appfw-application.so.0 libcapi-media-wav-player.so.0 libcapi-network-bluetooth.so.0 libcapi-network-wifi.so.1 libcapi-system-device.so.0 libdlog.so.0 libecore.so.1 libeina.so.1 libeldbus.so.1 libelementary.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgobject-2.0.so.0 libnotification.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libtts.so libtzplatform-config-2.0.so.2 libtzplatform-config-2.0.so.2(TPC) libvconf.so.0 libvconf.so.0(VCONF_BUXTON_1.0) rtld(GNU_HASH) [ 93s] Processing files: org.tizen.screen-reader-debugsource-0.0.8-27.1.armv7l [ 93s] Provides: org.tizen.screen-reader-debugsource = 0.0.8-27.1 org.tizen.screen-reader-debugsource(armv7l-32) = 0.0.8-27.1 [ 93s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 93s] Processing files: org.tizen.screen-reader-debuginfo-0.0.8-27.1.armv7l [ 93s] Provides: org.tizen.screen-reader-debuginfo = 0.0.8-27.1 org.tizen.screen-reader-debuginfo(armv7l-32) = 0.0.8-27.1 [ 93s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 93s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm [ 93s] warning: Could not canonicalize hostname: w36 [ 93s] Wrote: /home/abuild/rpmbuild/SRPMS/org.tizen.screen-reader-0.0.8-27.1.src.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-0.0.8-27.1.armv7l.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-debugsource-0.0.8-27.1.armv7l.rpm [ 93s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-debuginfo-0.0.8-27.1.armv7l.rpm [ 93s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.84MQso [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd org.tizen.screen-reader-0.0.8 [ 93s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/org.tizen.screen-reader-0.0.8-27.1.arm [ 93s] + exit 0 [ 93s] ... checking for files with abuild user/group [ 93s] [ 93s] RPMLINT report: [ 93s] =============== [ 93s] qemu: Unsupported syscall: 311 [ 94s] org.tizen.screen-reader.armv7l: W: tizen-filelist-forbidden-fhs23 /usr/apps is not allowed in FHS 2.3 [ 94s] see http://www.pathname.com/fhs/ to find a better location [ 94s] [ 94s] org.tizen.screen-reader.armv7l: E: non-standard-group (Badness: 200) Unspecified [ 94s] org.tizen.screen-reader.src: E: non-standard-group (Badness: 200) Unspecified [ 94s] The value of the Group tag in the package is not valid. Valid groups are [ 94s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 94s] [ 94s] org.tizen.screen-reader.src:78: W: make-check-outside-check-section make test [ 94s] Make check or other automated regression test should be run in %check, as they [ 94s] can be disabled with a rpm macro for short circuiting purposes. [ 94s] [ 94s] org.tizen.screen-reader.src: W: invalid-url Source0: org.tizen.screen-reader-0.0.8.tar.gz [ 94s] The value should be a valid, public HTTP, HTTPS, or FTP URL. [ 94s] [ 94s] org.tizen.screen-reader.armv7l: E: group-placeholder-not-allowed (Badness: 200) Unspecified [ 94s] org.tizen.screen-reader.src: E: group-placeholder-not-allowed (Badness: 200) Unspecified [ 94s] The value of the Group tag is a placeholder, please use a proper value. Valid [ 94s] groups are listed here: [ 94s] https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 94s] [ 94s] org.tizen.screen-reader.armv7l: W: file-not-in-%lang /usr/apps/org.tizen.screen-reader/res/locale/en_US/LC_MESSAGES/screen-reader.mo [ 94s] 2 packages and 0 specfiles checked; 4 errors, 4 warnings. [ 94s] [ 94s] ... creating baselibs [ 94s] qemu: Unsupported syscall: 311 [ 94s] /etc/profile.d/dbus.sh: line 6: pgrep: command not found [ 95s] ... comparing built packages with the former built [ 95s] /usr/lib/build/pkg-diff.sh [ 95s] compare /.build.oldpackages/org.tizen.screen-reader-0.0.8-26.1.src.rpm /home/abuild/rpmbuild/SRPMS/org.tizen.screen-reader-0.0.8-27.1.src.rpm [ 95s] This is not a prerelease project. Compare the project name. [ 95s] comparing rpmtags [ 95s] comparing RELEASE [ 95s] comparing PROVIDES [ 95s] comparing scripts [ 95s] comparing filelist [ 95s] comparing file checksum [ 95s] RPM meta information is identical [ 96s] compare /.build.oldpackages/org.tizen.screen-reader-0.0.8-26.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-0.0.8-27.1.armv7l.rpm [ 96s] Comparing org.tizen.screen-reader-0.0.8-26.1.armv7l.rpm to org.tizen.screen-reader-0.0.8-27.1.armv7l.rpm [ 96s] This is not a prerelease project. Compare the project name. [ 96s] comparing rpmtags [ 96s] --- /tmp/tmp.FirMvM5445/tmp.vzwylK5463 2016-10-19 16:04:59.354640845 +0000 [ 96s] +++ /tmp/tmp.FirMvM5445/tmp.ERLWrQ5465 2016-10-19 16:04:59.374640844 +0000 [ 96s] @@ -8,4 +8,4 @@ [ 96s] cpio lzma 5 [ 96s] [ 96s] (none) (none) (none) [ 96s] -obs://build.tizen.org/Tizen:Common/arm-wayland/4e56194541ff01897219ceff1df422a8-screen-reader Tizen:Common / arm-wayland [ 96s] +obs://build.tizen.org/Tizen:Common/arm-wayland/8605d39ab8f1e61e3bcafce856783ba0-screen-reader Tizen:Common / arm-wayland [ 96s] RPM meta information is different [ 96s] compare /.build.oldpackages/org.tizen.screen-reader-debuginfo-0.0.8-26.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-debuginfo-0.0.8-27.1.armv7l.rpm [ 96s] skipping -debuginfo package [ 96s] compare /.build.oldpackages/org.tizen.screen-reader-debugsource-0.0.8-26.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-debugsource-0.0.8-27.1.armv7l.rpm [ 96s] Comparing org.tizen.screen-reader-debugsource-0.0.8-26.1.armv7l.rpm to org.tizen.screen-reader-debugsource-0.0.8-27.1.armv7l.rpm [ 96s] This is not a prerelease project. Compare the project name. [ 96s] comparing rpmtags [ 96s] --- /tmp/tmp.BMvtnJ5485/tmp.sYYpSX5503 2016-10-19 16:04:59.750640831 +0000 [ 96s] +++ /tmp/tmp.BMvtnJ5485/tmp.GMfsIi5505 2016-10-19 16:04:59.774640831 +0000 [ 96s] @@ -10,4 +10,4 @@ [ 96s] cpio lzma 5 [ 96s] [ 96s] (none) (none) (none) [ 96s] -obs://build.tizen.org/Tizen:Common/arm-wayland/4e56194541ff01897219ceff1df422a8-screen-reader Tizen:Common / arm-wayland [ 96s] +obs://build.tizen.org/Tizen:Common/arm-wayland/8605d39ab8f1e61e3bcafce856783ba0-screen-reader Tizen:Common / arm-wayland [ 96s] RPM meta information is different [ 96s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 96s] ... saving built statistics [ 97s] ... saving built packages [ 97s] /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-0.0.8-27.1.armv7l.rpm [ 97s] /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-debuginfo-0.0.8-27.1.armv7l.rpm [ 97s] /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.screen-reader-debugsource-0.0.8-27.1.armv7l.rpm [ 97s] /home/abuild/rpmbuild/SRPMS/org.tizen.screen-reader-0.0.8-27.1.src.rpm [ 97s] /home/abuild/rpmbuild/OTHER/_statistics [ 97s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 97s] [ 97s] w36 finished "build org.tizen.screen-reader.spec" at Wed Oct 19 16:05:00 UTC 2016. [ 97s] [ 98s] Powering off. [ 98s] [ 87.620368] Power down. [ 98s] build: extracting built packages... [ 98s] org.tizen.screen-reader-0.0.8-27.1.armv7l.rpm [ 98s] org.tizen.screen-reader-debuginfo-0.0.8-27.1.armv7l.rpm [ 98s] org.tizen.screen-reader-debugsource-0.0.8-27.1.armv7l.rpm [ 98s] org.tizen.screen-reader-0.0.8-27.1.src.rpm [ 98s] _statistics [ 98s] rpmlint.log Retried build at Thu Oct 20 11:09:55 2016 returned same result, skipped