[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=aarch64 [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w06 started "build _service:gbs:dos2unix.spec" at Sun Oct 16 05:57:02 UTC 2016. [ 0s] [ 0s] Building dos2unix for project 'Tizen:Common' repository 'arm64-wayland' arch 'aarch64' srcmd5 '3d74e616b6ca13b5b0a066edce6e80ec' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:dos2unix.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:dos2unix.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 0s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-aarch64... [ 4s] [25/40] preinstalling qemu-linux-user-cross... [ 4s] [26/40] preinstalling coreutils... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 5s] [35/40] preinstalling tar... [ 5s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 6s] [6/9] preinstalling grep... [ 6s] [7/9] preinstalling libblkid... [ 6s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 6s] reordering...cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 8s] booting kvm ... [ 8s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 8 [ 13s] doing fast boot [ 13s] Creating device nodes with udev [ 13s] Waiting for device /dev/vda to appear: ok [ 13s] fsck from util-linux 2.21.2 [ 13s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 13s] /dev/vda: clean, 5005/4194304 files, 377025/16777216 blocks [ 13s] fsck succeeded. Mounting root device read-write. [ 13s] Mounting root /dev/vda [ 13s] mount -o rw -t ext4 /dev/vda /root [ 13s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] 2nd stage started in virtual machine [ 13s] machine type: aarch64 [ 13s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 13s] swapon /dev/vdb [ 13s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 13s] mount: none is already mounted or /proc busy [ 13s] mount: none is already mounted or /dev/pts busy [ 13s] logging output to //.build.log... [ 14s] processing specfile /.build-srcdir/_service:gbs:dos2unix.spec ... [ 14s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 14s] running qemu-linux-user-cross postinstall script [ 14s] running qemu-accel-aarch64 postinstall script [ 14s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/4.9.2/liblto_plugin.so': No such file or directory [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 15s] [1/93] installing libmagic-data-5.28-4.1 [ 15s] [2/93] installing setup-0.9-3.8 [ 15s] [3/93] installing terminfo-base-5.9-1.14 [ 15s] [4/93] installing filesystem-3.1-10.1 [ 15s] [5/93] installing glibc-2.20-12.1 [ 15s] [6/93] installing bash-3.2.57-3.6 [ 15s] [7/93] installing cpio-2.11-2.1 [ 15s] [8/93] installing diffutils-3.3-1.8 [ 15s] [9/93] installing findutils-4.3.8-3.1 [ 15s] [10/93] installing hostname-3.12-1.7 [ 15s] [11/93] installing libatomic-4.9.2-15.1 [ 16s] [12/93] installing libattr-2.4.47-1.13 [ 16s] [13/93] installing libbz2-1.0.6-2.7 [ 16s] [14/93] installing libcap-2.24-1.86 [ 16s] [15/93] installing libelf-0.153-5.28 [ 16s] [16/93] installing libext2fs-1.42.13-2.9 [ 16s] [17/93] installing libfreebl3-3.23-4.46 [ 16s] [18/93] installing libgcc-4.9.2-15.1 [ 16s] [19/93] installing libgomp-4.9.2-15.1 [ 16s] [20/93] installing libitm-4.9.2-15.1 [ 16s] [21/93] installing libltdl-2.4.2-3.6 [ 16s] [22/93] installing liblua-5.1.4-1.11 [ 16s] [23/93] installing liblzma-5.1.3-3.1 [ 16s] [24/93] installing libpcre-8.39-3.1 [ 16s] [25/93] installing libpopt-1.16-2.4 [ 16s] [26/93] installing libsmack-1.2.0-4.8 [ 16s] [27/93] installing libsmartcols-2.28-8.1 [ 16s] [28/93] installing libsqlite-3.8.10.2-1.8 [ 17s] [29/93] installing libuuid-2.28-8.1 [ 17s] [30/93] installing m4-1.4.17-1.5 [ 17s] [31/93] installing net-tools-2.0_20121208git-1.7 [ 17s] [32/93] installing nspr-4.12-4.17 [ 17s] [33/93] installing patch-2.7-1.6 [ 17s] [34/93] installing pkg-config-0.28-1.9 [ 17s] [35/93] installing sed-4.1c-2.5 [ 17s] [36/93] installing update-alternatives-1.16.3-1.5 [ 17s] [37/93] installing which-2.20-1.5 [ 17s] [38/93] installing zlib-1.2.8-1.11 [ 17s] [39/93] installing libncurses-5.9-1.14 [ 17s] [40/93] installing build-compare-2015.04.28-4.10 [ 17s] [41/93] installing qemu-linux-user-cross-2.7.0-1.1 [ 18s] [42/93] installing coreutils-6.9-8.1 [ 18s] [43/93] installing cpp-4.9.2-15.1 [ 19s] [44/93] installing gawk-3.1.5-2.9 [ 19s] [45/93] installing gcc-c++-4.9.2-15.1 [ 19s] [46/93] installing grep-2.5.2-2.9 [ 19s] [47/93] installing less-466-1.7 [ 19s] [48/93] installing libacl-2.2.52-3.8 [ 19s] [49/93] installing libasm-0.153-5.28 [ 19s] [50/93] installing libblkid-2.28-8.1 [ 19s] [51/93] installing libreadline-5.2-2.6 [ 20s] [52/93] installing libstdc++-4.9.2-15.1 [ 20s] [53/93] installing make-4.0-1.6 [ 20s] [54/93] installing nss-certs-3.23-4.46 [ 20s] [55/93] installing smack-1.2.0-4.8 [ 20s] [56/93] installing binutils-2.25-6.12 [ 20s] [57/93] installing bzip2-1.0.6-2.7 [ 20s] [58/93] installing libmagic-5.28-4.1 [ 20s] [59/93] installing libxml2-2.9.4-5.7 [ 20s] [60/93] installing xz-5.1.3-3.1 [ 20s] [61/93] installing libdw-0.153-5.28 [ 20s] [62/93] installing libstdc++-devel-4.9.2-15.1 [ 21s] [63/93] installing file-5.28-4.1 [ 21s] [64/93] installing libmount-2.28-8.1 [ 21s] [65/93] installing linux-glibc-devel-3.10-1.4 [ 21s] [66/93] installing tar-1.17-2.7 [ 21s] [67/93] installing db4-4.8.30.NC-2.1 [ 21s] [68/93] installing gettext-runtime-0.19.7-2.7 [ 21s] [69/93] installing glibc-locale-2.20-12.1 [ 21s] [70/93] installing gzip-1.3.12-2.9 [ 21s] [71/93] installing libfdisk1-2.28-8.1 [ 21s] [72/93] installing libubsan-4.9.2-15.1 [ 21s] [73/93] installing pam-1.1.6-4.8 [ 22s] [74/93] installing tzdata-2016f-2.3 [ 22s] [75/93] installing elfutils-0.153-5.28 [ 22s] [76/93] installing glibc-devel-2.20-12.1 [ 22s] [77/93] installing gettext-tools-0.19.7-2.7 [ 22s] [78/93] installing perl-5.20.0-3.61 [ 23s] [79/93] installing gcc-4.9.2-15.1 [ 24s] [80/93] installing util-linux-2.28-8.1 [ 24s] [81/93] installing build-mkbaselibs-20120927-1.3 [ 24s] [82/93] installing qemu-accel-aarch64-0.4-9.7 [ 27s] [83/93] installing autoconf-2.69-1.4 [ 27s] [84/93] installing util-linux-su-2.28-8.1 [ 27s] [85/93] installing automake-1.14.1-1.4 [ 28s] [86/93] installing build-20120927-1.3 [ 28s] [87/93] installing libtool-2.4.2-3.6 [ 28s] [88/93] installing nss-3.23-4.46 [ 28s] [89/93] installing libsoftokn3-3.23-4.46 [ 28s] [90/93] installing rpm-4.11.0.1-9.2 [ 28s] [91/93] installing rpmlint-mini-1.5-3.25 [ 28s] [92/93] installing rpm-build-4.11.0.1-9.2 [ 29s] [93/93] installing rpmlint-tizen-1.0-1.3 [ 29s] removing nis flags from //etc/nsswitch.conf... [ 29s] now finalizing build dir... [ 29s] qemu: Unsupported syscall: 219 [ 35s] build target is aarch64-tizen-linux [ 35s] ----------------------------------------------------------------- [ 35s] I have the following modifications for dos2unix.spec: [ 35s] 4c4 [ 35s] < Release: 0 [ 35s] --- [ 35s] > Release: 7.4 [ 35s] ----------------------------------------------------------------- [ 35s] ----- building dos2unix.spec (user abuild) [ 35s] ----------------------------------------------------------------- [ 35s] ----------------------------------------------------------------- [ 35s] Running qemu build hang workaround... [ 35s] /bin/ps command not found [ 35s] qemu: Unsupported syscall: 219 [ 35s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common/arm64-wayland/3d74e616b6ca13b5b0a066edce6e80ec-dos2unix' /home/abuild/rpmbuild/SOURCES/dos2unix.spec [ 35s] Building target platforms: aarch64-tizen-linux [ 35s] Building for target aarch64-tizen-linux [ 35s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.DqY1Wm [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + rm -rf dos2unix-6.0 [ 35s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dos2unix-6.0.tar.gz [ 35s] + /bin/tar -xf - [ 35s] + STATUS=0 [ 35s] + '[' 0 -ne 0 ']' [ 35s] + cd dos2unix-6.0 [ 35s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 35s] + echo 'Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch):' [ 35s] Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch): [ 35s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-encoding-is-changed-from-latin1-to-utf8.patch [ 35s] + /bin/patch -p1 --fuzz=2 [ 35s] patching file man/es/man1/dos2unix.pod [ 35s] patching file man/nl/man1/dos2unix.pod [ 35s] + cp /home/abuild/rpmbuild/SOURCES/dos2unix.manifest . [ 35s] + find . -type f [ 35s] + xargs chmod -x [ 35s] + exit 0 [ 35s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.9sGVLE [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd dos2unix-6.0 [ 35s] ++ uname -m [ 35s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 35s] + ref=/usr/lib/rpm [ 35s] + for s in guess sub [ 35s] ++ find -maxdepth 8 -name config.guess [ 35s] + for s in guess sub [ 35s] ++ find -maxdepth 8 -name config.sub [ 35s] + LANG=C [ 35s] + export LANG [ 35s] + unset DISPLAY [ 35s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 35s] + export CFLAGS [ 35s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 35s] + export CXXFLAGS [ 35s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 35s] + export FFLAGS [ 35s] + LDFLAGS= [ 35s] + export LDFLAGS [ 35s] + LD_AS_NEEDED=1 [ 35s] + export LD_AS_NEEDED [ 35s] + export RPM_OPT_FLAGS [ 35s] + make -j8 CC=gcc HTMLEXT=html [ 35s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c dos2unix.c -o dos2unix.o [ 35s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c querycp.c -o querycp.o [ 35s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c common.c -o common.o [ 35s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c unix2dos.c -o unix2dos.o [ 35s] LC_CTYPE=C pod2text man/man1/dos2unix.pod > dos2unix.txt [ 35s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.html [ 35s] msgfmt -c po/eo.po -o po/eo.mo [ 35s] msgfmt -c po/de.po -o po/de.mo [ 35s] msgfmt -c po/es.po -o po/es.mo [ 35s] po/es.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 35s] and iconv() does not support "ISO-8859-1". [ 35s] Installing GNU libiconv and then reinstalling GNU gettext [ 35s] would fix this problem. [ 35s] Continuing anyway. [ 35s] po/es.po:8: warning: header field 'Language' still has the initial default value [ 35s] msgfmt -c po/nl.po -o po/nl.mo [ 35s] po/nl.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 35s] and iconv() does not support "ISO-8859-1". [ 35s] Installing GNU libiconv and then reinstalling GNU gettext [ 35s] would fix this problem. [ 35s] Continuing anyway. [ 35s] make -C man/man1 [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 35s] # make target - create manual page from a *.pod page [ 35s] podchecker dos2unix.pod [ 35s] make -C man/man1 [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 35s] # make target - create manual page from a *.pod page [ 35s] podchecker dos2unix.pod [ 35s] # make target - create manual page from a *.pod page [ 35s] podchecker ../nl/man1/dos2unix.pod [ 35s] make -C man/man1 [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 35s] # make target - create manual page from a *.pod page [ 35s] podchecker dos2unix.pod [ 36s] # make target - create manual page from a *.pod page [ 36s] podchecker ../es/man1/dos2unix.pod [ 36s] gcc dos2unix.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o dos2unix [ 36s] gcc unix2dos.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o unix2dos [ 36s] # make target - create manual page from a *.pod page [ 36s] podchecker ../nl/man1/dos2unix.pod [ 36s] # make target - create manual page from a *.pod page [ 36s] podchecker ../es/man1/dos2unix.pod [ 36s] dos2unix.pod pod syntax OK. [ 36s] LC_CTYPE=C pod2man \ [ 36s] --center="$(date "+%Y-%m-%d")" \ [ 36s] --name="dos2unix" \ [ 36s] --section="1" \ [ 36s] dos2unix.pod \ [ 36s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 36s] > dos2unix.1 && \ [ 36s] rm -f pod*.tmp [ 36s] dos2unix.pod pod syntax OK. [ 36s] LC_CTYPE=C pod2man \ [ 36s] --center="$(date "+%Y-%m-%d")" \ [ 36s] --name="dos2unix" \ [ 36s] --section="1" \ [ 36s] dos2unix.pod \ [ 36s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 36s] > dos2unix.1 && \ [ 36s] rm -f pod*.tmp [ 36s] ../nl/man1/dos2unix.pod pod syntax OK. [ 36s] ln -sf dos2unix mac2unix [ 36s] LC_CTYPE=C pod2man \ [ 36s] --center="$(date "+%Y-%m-%d")" \ [ 36s] --name="dos2unix" \ [ 36s] --section="1" \ [ 36s] ../nl/man1/dos2unix.pod \ [ 36s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 36s] > ../nl/man1/dos2unix.1 && \ [ 36s] rm -f pod*.tmp [ 36s] ln -sf unix2dos unix2mac [ 36s] # make target - create manual page from a *.pod page [ 36s] podchecker ../nl/man1/dos2unix.pod [ 36s] dos2unix.pod pod syntax OK. [ 36s] LC_CTYPE=C pod2man \ [ 36s] --center="$(date "+%Y-%m-%d")" \ [ 36s] --name="dos2unix" \ [ 36s] --section="1" \ [ 36s] dos2unix.pod \ [ 36s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 36s] > dos2unix.1 && \ [ 36s] rm -f pod*.tmp [ 37s] ../es/man1/dos2unix.pod pod syntax OK. [ 37s] LC_CTYPE=C pod2man \ [ 37s] --center="$(date "+%Y-%m-%d")" \ [ 37s] --name="dos2unix" \ [ 37s] --section="1" \ [ 37s] ../es/man1/dos2unix.pod \ [ 37s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 37s] > ../es/man1/dos2unix.1 && \ [ 37s] rm -f pod*.tmp [ 37s] ../nl/man1/dos2unix.pod pod syntax OK. [ 37s] LC_CTYPE=C pod2man \ [ 37s] --center="$(date "+%Y-%m-%d")" \ [ 37s] --name="dos2unix" \ [ 37s] --section="1" \ [ 37s] ../nl/man1/dos2unix.pod \ [ 37s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 37s] > ../nl/man1/dos2unix.1 && \ [ 37s] rm -f pod*.tmp [ 37s] ../es/man1/dos2unix.pod pod syntax OK. [ 37s] LC_CTYPE=C pod2man \ [ 37s] --center="$(date "+%Y-%m-%d")" \ [ 37s] --name="dos2unix" \ [ 37s] --section="1" \ [ 37s] ../es/man1/dos2unix.pod \ [ 37s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 37s] > ../es/man1/dos2unix.1 && \ [ 37s] rm -f pod*.tmp [ 37s] ../nl/man1/dos2unix.pod pod syntax OK. [ 37s] LC_CTYPE=C pod2man \ [ 37s] --center="$(date "+%Y-%m-%d")" \ [ 37s] --name="dos2unix" \ [ 37s] --section="1" \ [ 37s] ../nl/man1/dos2unix.pod \ [ 37s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 37s] > ../nl/man1/dos2unix.1 && \ [ 37s] rm -f pod*.tmp [ 37s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 37s] perl -pli.bak \ [ 37s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 37s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 37s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 37s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 37s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 37s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 37s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 37s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 37s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 37s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 37s] dos2unix.1 [ 37s] perl -pli.bak \ [ 37s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 37s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 37s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 37s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 37s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 37s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 37s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 37s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 37s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 37s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 37s] dos2unix.1 [ 37s] POD document had syntax errors at /bin/pod2man line 71. [ 37s] perl -pli.bak \ [ 37s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 37s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 37s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 37s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 37s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 37s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 37s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 37s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 37s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 37s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 37s] ../nl/man1/dos2unix.1 [ 37s] # make target - create manual page from a *.pod page [ 37s] podchecker ../es/man1/dos2unix.pod [ 37s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 37s] perl -pli.bak \ [ 37s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 37s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 37s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 37s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 37s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 37s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 37s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 37s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 37s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 37s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 37s] dos2unix.1 [ 38s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 38s] POD document had syntax errors at /bin/pod2man line 71. [ 38s] perl -pli.bak \ [ 38s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 38s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 38s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 38s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 38s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 38s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 38s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 38s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 38s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 38s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 38s] ../nl/man1/dos2unix.1 [ 38s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 38s] POD document had syntax errors at /bin/pod2man line 71. [ 38s] perl -pli.bak \ [ 38s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 38s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 38s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 38s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 38s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 38s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 38s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 38s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 38s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 38s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 38s] ../es/man1/dos2unix.1 [ 38s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 38s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 38s] POD document had syntax errors at /bin/pod2man line 71. [ 38s] perl -pli.bak \ [ 38s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 38s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 38s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 38s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 38s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 38s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 38s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 38s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 38s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 38s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 38s] ../es/man1/dos2unix.1 [ 38s] ../es/man1/dos2unix.pod pod syntax OK. [ 38s] LC_CTYPE=C pod2man \ [ 38s] --center="$(date "+%Y-%m-%d")" \ [ 38s] --name="dos2unix" \ [ 38s] --section="1" \ [ 38s] ../es/man1/dos2unix.pod \ [ 38s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 38s] > ../es/man1/dos2unix.1 && \ [ 38s] rm -f pod*.tmp [ 38s] POD document had syntax errors at /bin/pod2man line 71. [ 38s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 38s] perl -pli.bak \ [ 38s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 38s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 38s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 38s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 38s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 38s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 38s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 38s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 38s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 38s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 38s] ../nl/man1/dos2unix.1 [ 39s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 39s] POD document had syntax errors at /bin/pod2man line 71. [ 39s] perl -pli.bak \ [ 39s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 39s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 39s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 39s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 39s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 39s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 39s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 39s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 39s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 39s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 39s] ../es/man1/dos2unix.1 [ 39s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 39s] + exit 0 [ 39s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.jilAy9 [ 39s] + umask 022 [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + cd dos2unix-6.0 [ 39s] + LANG=C [ 39s] + export LANG [ 39s] + unset DISPLAY [ 39s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 [ 39s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 [ 39s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 install [ 39s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.htm [ 40s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/bin [ 40s] install -m 755 dos2unix /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/bin [ 40s] install -m 755 unix2dos /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/bin [ 40s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/bin; ln -sf dos2unix mac2unix [ 40s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/bin; ln -sf unix2dos unix2mac [ 40s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/man1 [ 40s] install -m 644 man/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/man1 [ 41s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/man1; ln -sf dos2unix.1 mac2unix.1 [ 41s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2dos.1 [ 41s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2mac.1 [ 41s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/nl/man1/ ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/es/man1/ ; [ 41s] install -m 644 man/nl/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/nl/man1/ ; install -m 644 man/es/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/es/man1/ ; [ 41s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; [ 41s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; [ 41s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; [ 41s] -- install-mo [ 41s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/eo/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/de/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/es/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/nl/LC_MESSAGES ; [ 41s] install -m 644 po/eo.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/eo/LC_MESSAGES/dos2unix.mo ; install -m 644 po/de.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/de/LC_MESSAGES/dos2unix.mo ; install -m 644 po/es.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/es/LC_MESSAGES/dos2unix.mo ; install -m 644 po/nl.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/locale/nl/LC_MESSAGES/dos2unix.mo ; [ 41s] -- install-doc [ 41s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/doc/dos2unix-6.0 [ 41s] install -m 644 README.txt NEWS.txt ChangeLog.txt COPYING.txt TODO.txt BUGS.txt dos2unix.txt dos2unix.htm /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/doc/dos2unix-6.0 [ 41s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/info/dir [ 41s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 -regex '.*\.la$' [ 41s] + xargs rm -f -- [ 41s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 -regex '.*\.a$' [ 41s] + xargs rm -f -- docdir=/usr/share/doc/packages/dos2unix [ 41s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 dos2unix --all-name --with-man [ 41s] find: `/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/share/help/': No such file or directory [ 41s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dos2unix-6.0 [ 41s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/bin/dos2unix [ 41s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64/usr/bin/unix2dos [ 42s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 42s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 42s] cpio: glibc-2.20/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 42s] cpio: glibc-2.20/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 42s] cpio: glibc-2.20/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 42s] 284 blocks [ 42s] + /usr/lib/rpm/check-buildroot [ 42s] + /usr/lib/rpm//brp-compress [ 42s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 42s] + /usr/lib/rpm/brp-python-hardlink [ 42s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 [ 42s] Processing files: dos2unix-6.0-7.4.aarch64 [ 42s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 42s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 42s] [ 42s] Provides: dos2unix = 6.0-7.4 dos2unix(aarch-64) = 6.0-7.4 unix2dos = 6.0 [ 42s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 42s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 42s] Obsoletes: unix2dos < 6.0 [ 42s] Processing files: dos2unix-debugsource-6.0-7.4.aarch64 [ 42s] Provides: dos2unix-debugsource = 6.0-7.4 dos2unix-debugsource(aarch-64) = 6.0-7.4 [ 42s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 42s] Processing files: dos2unix-debuginfo-6.0-7.4.aarch64 [ 42s] warning: File listed twice: /usr/lib/debug/.build-id [ 42s] Provides: dos2unix-debuginfo = 6.0-7.4 dos2unix-debuginfo(aarch-64) = 6.0-7.4 [ 42s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 42s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 [ 42s] warning: Could not canonicalize hostname: w06 [ 42s] Wrote: /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-7.4.src.rpm [ 42s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-7.4.aarch64.rpm [ 42s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-7.4.aarch64.rpm [ 42s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-7.4.aarch64.rpm [ 42s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.HGAVal [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd dos2unix-6.0 [ 42s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.4.aarch64 [ 42s] + exit 0 [ 42s] ... checking for files with abuild user/group [ 43s] [ 43s] RPMLINT report: [ 43s] =============== [ 43s] qemu: Unsupported syscall: 219 [ 43s] dos2unix.aarch64: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 43s] dos2unix.src: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 43s] The value of the Group tag in the package is not valid. Valid groups are [ 43s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 43s] [ 43s] 2 packages and 0 specfiles checked; 2 errors, 0 warnings. [ 43s] [ 43s] ... creating baselibs [ 43s] qemu: Unsupported syscall: 219 [ 44s] ... comparing built packages with the former built [ 44s] /usr/lib/build/pkg-diff.sh [ 44s] compare /.build.oldpackages/dos2unix-6.0-7.3.src.rpm /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-7.4.src.rpm [ 44s] This is not a prerelease project. Compare the project name. [ 44s] comparing rpmtags [ 44s] comparing RELEASE [ 44s] comparing PROVIDES [ 44s] comparing scripts [ 44s] comparing filelist [ 44s] comparing file checksum [ 45s] RPM meta information is identical [ 45s] compare /.build.oldpackages/dos2unix-6.0-7.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-7.4.aarch64.rpm [ 45s] Comparing dos2unix-6.0-7.3.aarch64.rpm to dos2unix-6.0-7.4.aarch64.rpm [ 45s] This is not a prerelease project. Compare the project name. [ 45s] comparing rpmtags [ 45s] comparing RELEASE [ 45s] comparing PROVIDES [ 45s] comparing scripts [ 45s] comparing filelist [ 45s] comparing file checksum [ 45s] creating rename script [ 45s] RPM file checksum differs. [ 45s] Extracting packages [ 45s] /usr/share/man/es/man1/dos2unix.1 differs (troff or preprocessor input, ASCII text) [ 45s] --- old//usr/share/man/es/man1/dos2unix.1 2016-10-16 05:57:47.173511529 +0000 [ 45s] +++ new//usr/share/man/es/man1/dos2unix.1 2016-10-16 05:57:47.177511529 +0000 [ 45s] @@ -1,641 +0,0 @@ [ 45s] -.\" Overly verbose Pod::Man [ 45s] -.\" [ 45s] -.\" Standard preamble: [ 45s] -.\" ======================================================================== [ 45s] -.de Sp \" Vertical space (when we can't use .PP) [ 45s] -.if t .sp .5v [ 45s] -.if n .sp [ 45s] -.. [ 45s] -.de Vb \" Begin verbatim text [ 45s] -.ft CW [ 45s] -.nf [ 45s] -.ne \\$1 [ 45s] -.. [ 45s] -.de Ve \" End verbatim text [ 45s] -.ft R [ 45s] -.fi [ 45s] -.. [ 45s] -.\" Set up some character translations and predefined strings. \*(-- will [ 45s] -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left [ 45s] -.\" double quote, and \*(R" will give a right double quote. \*(C+ will [ 45s] -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and [ 45s] -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, [ 45s] -.\" nothing in troff, for use with C<>. [ 45s] -.tr \(*W- [ 45s] -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' [ 45s] -.ie n \{\ [ 45s] -. ds -- \(*W- [ 45s] -. ds PI pi [ 45s] -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch [ 45s] -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch [ 45s] -. ds L" "" [ 45s] -. ds R" "" [ 45s] -. ds C` "" [ 45s] -. ds C' "" [ 45s] -'br\} [ 45s] -.el\{\ [ 45s] -. ds -- \|\(em\| [ 45s] -. ds PI \(*p [ 45s] -. ds L" `` [ 45s] -. ds R" '' [ 45s] -. ds C` [ 45s] -. ds C' [ 45s] -'br\} [ 45s] -.\" [ 45s] -.\" Escape single quotes in literal strings from groff's Unicode transform. [ 45s] -.ie \n(.g .ds Aq \(aq [ 45s] -.el .ds Aq ' [ 45s] -.\" [ 45s] -.\" If the F register is turned on, we'll generate index entries on stderr for [ 45s] -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index [ 45s] -.\" entries marked with X<> in POD. Of course, you'll have to process the [ 45s] -.\" output yourself in some meaningful fashion. [ 45s] -.\" [ 45s] -.\" Avoid warning from groff about undefined register 'F'. [ 45s] -.de IX [ 45s] -.. [ 45s] -.nr rF 0 [ 45s] -.if \n(.g .if rF .nr rF 1 [ 45s] -.if (\n(rF:(\n(.g==0)) \{ [ 45s] -. if \nF \{ [ 45s] -. de IX [ 45s] -. tm Index:\\$1\t\\n%\t"\\$2" [ 45s] -.. [ 45s] -. if !\nF==2 \{ [ 45s] -. nr % 0 [ 45s] -. nr F 2 [ 45s] -. \} [ 45s] -. \} [ 45s] -.\} [ 45s] -.rr rF [ 45s] -.\" [ 45s] -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). [ 45s] -.\" Fear. Run. Save yourself. No user-serviceable parts. [ 45s] -. \" fudge factors for nroff and troff [ 45s] -.if n \{\ [ 45s] -. ds #H 0 [ 45s] -. ds #V .8m [ 45s] -. ds #F .3m [ 45s] -. ds #[ \f1 [ 45s] -. ds #] \fP [ 45s] -.\} [ 45s] -.if t \{\ [ 45s] -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) [ 45s] -. ds #V .6m [ 45s] -. ds #F 0 [ 45s] -. ds #[ \& [ 45s] -. ds #] \& [ 45s] -.\} [ 45s] -. \" simple accents for nroff and troff [ 45s] -.if n \{\ [ 45s] -. ds ' \& [ 45s] -. ds ` \& [ 45s] -. ds ^ \& [ 45s] -. ds , \& [ 45s] -. ds ~ ~ [ 45s] -. ds / [ 45s] -.\} [ 45s] -.if t \{\ [ 45s] -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" [ 45s] -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' [ 45s] -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' [ 45s] -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' [ 45s] -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' [ 45s] -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' [ 45s] -.\} [ 45s] -. \" troff and (daisy-wheel) nroff accents [ 45s] -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' [ 45s] -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' [ 45s] -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] [ 45s] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' [ 45s] -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' [ 45s] -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] [ 45s] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] [ 45s] -.ds ae a\h'-(\w'a'u*4/10)'e [ 45s] -.ds Ae A\h'-(\w'A'u*4/10)'E [ 45s] -. \" corrections for vroff [ 45s] -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' [ 45s] -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' [ 45s] -. \" for low resolution devices (crt and lpr) [ 45s] -.if \n(.H>23 .if \n(.V>19 \ [ 45s] -\{\ [ 45s] -. ds : e [ 45s] -. ds 8 ss [ 45s] -. ds o a [ 45s] -. ds d- d\h'-1'\(ga [ 45s] -. ds D- D\h'-1'\(hy [ 45s] -. ds th \o'bp' [ 45s] -. ds Th \o'LP' [ 45s] -. ds ae ae [ 45s] -. ds Ae AE [ 45s] -.\} [ 45s] -.rm #[ #] #H #V #F C [ 45s] -.\" ======================================================================== [ 45s] -.\" [ 45s] -.IX Title "dos2unix 1" [ 45s] -.TH dos2unix 1 "uq2000-02-02" "dos2unix" "uuu2000-05-05" [ 45s] -.\" For nroff, turn off justification. Always turn off hyphenation; it makes [ 45s] -.\" way too many mistakes in technical documents. [ 45s] -.if n .ad l [ 45s] -.nh [ 45s] -.SH "NOMBRE" [ 45s] -.IX Header "NOMBRE" [ 45s] -dos2unix \- Convertidor de archivos de texto de formato DOS/Mac a Unix y viceversa [ 45s] -.SH "SINOPSIS" [ 45s] -.IX Header "SINOPSIS" [ 45s] -.Vb 2 [ 45s] -\& dos2unix [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 45s] -\& unix2dos [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 45s] -.Ve [ 45s] -.SH "DESCRIPCI\['O]N" [ 45s] -.IX Header "DESCRIPCIO'N" [ 45s] -El paquete Dos2unix incluye las utiler\['i]as \f(CW\*(C`dos2unix\*(C'\fR y \f(CW\*(C`unix2dos\*(C'\fR para [ 45s] -convertir archivos de texto plano en formato \s-1DOS\s0 o Mac a formato Unix y viceversa. [ 45s] -.PP [ 45s] -En archivos de texto DOS/Windows, un salto de l\['i]nea, tambi\['e]n conocido como nueva [ 45s] -l\['i]nea, es una combinaci\['o]n de dos caracteres: un retorno de carro (\s-1CR\s0) seguido [ 45s] -por un salto de l\['i]nea (\s-1LF\s0). En archivos de texto Unix, un salto de l\['i]nea es [ 45s] -solamente un car\['a]cter: el salto de l\['i]nea (\s-1LF\s0). En archivos de texto Mac, antes [ 45s] -de Mac \s-1OS X,\s0 un salto de l\['i]nea era s\['o]lo un car\['a]cter retorno de carro (\s-1CR\s0). [ 45s] -Actualmente, Mac \s-1OS\s0 usa el estilo Unix de saltos de l\['i]nea (\s-1LF\s0). [ 45s] -.PP [ 45s] -Los archivos binarios son ignorados autom\['a]ticamente, a menos que se fuerce su [ 45s] -conversi\['o]n. [ 45s] -.PP [ 45s] -Los archivos no regulares, tales como directorios y \s-1FIFO,\s0 son ignorados [ 45s] -autom\['a]ticamente. [ 45s] -.PP [ 45s] -Los enlaces simb\['o]licos y sus destinos no son modificados por defecto. [ 45s] -Los enlaces simb\['o]licos pueden opcionalmente ser reemplazados, o la salida puede [ 45s] -ser escrita al archivo destino del enlace. [ 45s] -Los enlaces simb\['o]licos en Windows no est\['a]n soportados. Estos son siempre [ 45s] -reemplazados, sin que se alteren sus destinos. [ 45s] -.PP [ 45s] -Dos2unix fue moldeado a partir del dos2unix que existe en SunOS/Solaris y tiene [ 45s] -modos de conversi\['o]n similares. [ 45s] -.SH "PAR\['A]METROS" [ 45s] -.IX Header "PARA'METROS" [ 45s] -.IP "\fB\-\-\fR" 4 [ 45s] -.IX Item "--" [ 45s] -Todos los par\['a]metros siguientes son tratados como nombres de archivo. Use este [ 45s] -par\['a]metro si desea convertir archivos cuyos nombres inician con un gui\['o]n. Por [ 45s] -ejemplo para convertir un archivo llamado \*(L"\-foo\*(R", use este comando: [ 45s] -.Sp [ 45s] -.Vb 1 [ 45s] -\& dos2unix \-\- \-foo [ 45s] -.Ve [ 45s] -.Sp [ 45s] -O en modo de archivo nuevo: [ 45s] -.Sp [ 45s] -.Vb 1 [ 45s] -\& dos2unix \-n \-\- \-foo out.txt [ 45s] -.Ve [ 45s] -.IP "\fB\-ascii\fR" 4 [ 45s] -.IX Item "-ascii" [ 45s] -S\['o]lo convierte los salto de l\['i]nea. \['E]ste es el modo de conversi\['o]n por defecto. [ 45s] -.IP "\fB\-iso\fR" 4 [ 45s] -.IX Item "-iso" [ 45s] compare /.build.oldpackages/dos2unix-debuginfo-6.0-7.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-7.4.aarch64.rpm [ 45s] skipping -debuginfo package [ 45s] compare /.build.oldpackages/dos2unix-debugsource-6.0-7.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-7.4.aarch64.rpm [ 45s] Comparing dos2unix-debugsource-6.0-7.3.aarch64.rpm to dos2unix-debugsource-6.0-7.4.aarch64.rpm [ 46s] This is not a prerelease project. Compare the project name. [ 46s] comparing rpmtags [ 46s] comparing RELEASE [ 46s] comparing PROVIDES [ 46s] comparing scripts [ 46s] comparing filelist [ 46s] comparing file checksum [ 46s] creating rename script [ 46s] RPM meta information is identical [ 46s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 46s] ... saving built statistics [ 46s] ... saving built packages [ 46s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-7.4.aarch64.rpm [ 46s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-7.4.aarch64.rpm [ 46s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-7.4.aarch64.rpm [ 46s] /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-7.4.src.rpm [ 46s] /home/abuild/rpmbuild/OTHER/_statistics [ 46s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 46s] [ 46s] w06 finished "build dos2unix.spec" at Sun Oct 16 05:57:48 UTC 2016. [ 46s] [ 49s] [ 37.668548] SysRq : Power Off [ 50s] [ 37.888528] Power down. [ 50s] build: extracting built packages... [ 50s] dos2unix-6.0-7.4.aarch64.rpm [ 50s] dos2unix-debuginfo-6.0-7.4.aarch64.rpm [ 50s] dos2unix-debugsource-6.0-7.4.aarch64.rpm [ 50s] dos2unix-6.0-7.4.src.rpm [ 50s] _statistics [ 50s] rpmlint.log