[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=aarch64 [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w13 started "build _service:gbs:dracut.spec" at Sun Oct 16 07:14:19 UTC 2016. [ 0s] [ 0s] Building dracut for project 'Tizen:Common' repository 'arm64-wayland' arch 'aarch64' srcmd5 'c34a9884c2a3ec235c11218dfe7cf25e' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-aarch64... [ 4s] [25/40] preinstalling qemu-linux-user-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 5s] [35/40] preinstalling tar... [ 5s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 5s] [ 6s] [1/9] preinstalling libext2fs... [ 6s] [2/9] preinstalling libpcre... [ 6s] [3/9] preinstalling libsmartcols... [ 6s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 7s] [6/9] preinstalling grep... [ 7s] [7/9] preinstalling libblkid... [ 7s] [8/9] preinstalling libmount... [ 7s] [9/9] preinstalling util-linux... [ 7s] copying packages... [ 7s] reordering...cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 16s] booting kvm ... [ 16s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 19s] doing fast boot [ 19s] Creating device nodes with udev [ 19s] Waiting for device /dev/vda to appear: ok [ 19s] fsck from util-linux 2.21.2 [ 19s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 19s] /dev/vda: clean, 5062/2392064 files, 267196/9568256 blocks [ 19s] fsck succeeded. Mounting root device read-write. [ 19s] Mounting root /dev/vda [ 19s] mount -o rw -t ext4 /dev/vda /root [ 20s] replacing /etc/mtab with symlink to /proc/self/mounts [ 20s] 2nd stage started in virtual machine [ 20s] machine type: aarch64 [ 21s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 21s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 21s] swapon /dev/vdb [ 21s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 21s] mount: none is already mounted or /proc busy [ 21s] mount: none is already mounted or /dev/pts busy [ 21s] logging output to //.build.log... [ 21s] processing specfile /.build-srcdir/_service:gbs:dracut.spec ... [ 21s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 21s] running qemu-linux-user-cross postinstall script [ 21s] running qemu-accel-aarch64 postinstall script [ 21s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/4.9.2/liblto_plugin.so': No such file or directory [ 21s] running setup postinstall script [ 21s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 21s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 21s] initializing rpm db... [ 22s] [1/119] installing libmagic-data-5.28-4.1 [ 22s] [2/119] installing setup-0.9-3.8 [ 22s] [3/119] installing terminfo-base-5.9-1.14 [ 22s] [4/119] installing filesystem-3.1-10.1 [ 22s] [5/119] installing glibc-2.20-12.1 [ 22s] [6/119] installing bash-3.2.57-3.6 [ 22s] [7/119] installing cpio-2.11-2.1 [ 23s] [8/119] installing diffutils-3.3-1.8 [ 23s] [9/119] installing findutils-4.3.8-3.1 [ 23s] [10/119] installing hostname-3.12-1.7 [ 23s] [11/119] installing libatomic-4.9.2-15.1 [ 23s] [12/119] installing libattr-2.4.47-1.13 [ 23s] [13/119] installing libbz2-1.0.6-2.7 [ 23s] [14/119] installing libcap-2.24-1.86 [ 23s] [15/119] installing libcares-1.10.0-1.8 [ 23s] [16/119] installing libelf-0.153-5.28 [ 23s] [17/119] installing libexpat-2.1.1-2.8 [ 23s] [18/119] installing libext2fs-1.42.13-2.9 [ 23s] [19/119] installing libfreebl3-3.23-4.46 [ 23s] [20/119] installing libgcc-4.9.2-15.1 [ 23s] [21/119] installing libgomp-4.9.2-15.1 [ 23s] [22/119] installing libgpg-error-1.13-3.72 [ 23s] [23/119] installing libidn-1.15-4.1 [ 23s] [24/119] installing libitm-4.9.2-15.1 [ 23s] [25/119] installing libltdl-2.4.2-3.6 [ 23s] [26/119] installing liblua-5.1.4-1.11 [ 24s] [27/119] installing liblzma-5.1.3-3.1 [ 24s] [28/119] installing libpcre-8.39-3.1 [ 24s] [29/119] installing libpopt-1.16-2.4 [ 24s] [30/119] installing libpython-2.7.8-3.6 [ 24s] [31/119] installing libsmack-1.2.0-4.8 [ 24s] [32/119] installing libsmartcols-2.28-8.1 [ 24s] [33/119] installing libsqlite-3.8.10.2-1.8 [ 24s] [34/119] installing libuuid-2.28-8.1 [ 24s] [35/119] installing m4-1.4.17-1.5 [ 24s] [36/119] installing net-tools-2.0_20121208git-1.7 [ 24s] [37/119] installing nghttp2-1.0.0-2.1 [ 24s] [38/119] installing nspr-4.12-4.17 [ 24s] [39/119] installing patch-2.7-1.6 [ 24s] [40/119] installing pkg-config-0.28-1.9 [ 24s] [41/119] installing sed-4.1c-2.5 [ 24s] [42/119] installing update-alternatives-1.16.3-1.5 [ 24s] [43/119] installing which-2.20-1.5 [ 24s] [44/119] installing zlib-1.2.8-1.11 [ 24s] [45/119] installing libncurses-5.9-1.14 [ 25s] [46/119] installing shadow-utils-4.1.4.2-2.1 [ 25s] [47/119] installing build-compare-2015.04.28-4.10 [ 25s] [48/119] installing qemu-linux-user-cross-2.7.0-1.1 [ 26s] [49/119] installing coreutils-6.9-8.1 [ 26s] [50/119] installing cpp-4.9.2-15.1 [ 26s] [51/119] installing dash-0.5.7-1.8 [ 26s] [52/119] installing gawk-3.1.5-2.9 [ 26s] [53/119] installing gcc-c++-4.9.2-15.1 [ 27s] [54/119] installing grep-2.5.2-2.9 [ 27s] [55/119] installing less-466-1.7 [ 27s] [56/119] installing libacl-2.2.52-3.8 [ 27s] [57/119] installing libasm-0.153-5.28 [ 27s] [58/119] installing libblkid-2.28-8.1 [ 27s] [59/119] installing libgcrypt-1.7.1-3.6 [ 27s] [60/119] installing libopenssl-1.0.2j-10.1 [ 27s] [61/119] installing libreadline-5.2-2.6 [ 27s] [62/119] installing libstdc++-4.9.2-15.1 [ 27s] [63/119] installing make-4.0-1.6 [ 27s] [64/119] installing nss-certs-3.23-4.46 [ 28s] [65/119] installing smack-1.2.0-4.8 [ 28s] [66/119] installing binutils-2.25-6.12 [ 28s] [67/119] installing bzip2-1.0.6-2.7 [ 28s] [68/119] installing libmagic-5.28-4.1 [ 28s] [69/119] installing libxml2-2.9.4-5.7 [ 29s] [70/119] installing xz-5.1.3-3.1 [ 29s] [71/119] installing libdw-0.153-5.28 [ 29s] [72/119] installing libstdc++-devel-4.9.2-15.1 [ 29s] [73/119] installing file-5.28-4.1 [ 29s] [74/119] installing libmount-2.28-8.1 [ 30s] [75/119] installing linux-glibc-devel-3.10-1.4 [ 30s] [76/119] installing tar-1.17-2.7 [ 30s] [77/119] installing db4-4.8.30.NC-2.1 [ 30s] [78/119] installing glibc-locale-2.20-12.1 [ 31s] [79/119] installing gzip-1.3.12-2.9 [ 32s] [80/119] installing libfdisk1-2.28-8.1 [ 32s] [81/119] installing libubsan-4.9.2-15.1 [ 32s] [82/119] installing libxml2-tools-2.9.4-5.7 [ 32s] [83/119] installing pam-1.1.6-4.8 [ 33s] [84/119] installing rsync-3.1.1-5.16 [ 33s] [85/119] installing tzdata-2016f-2.3 [ 33s] [86/119] installing libcurl-7.50.2-14.1 [ 34s] [87/119] installing libxslt-1.1.29-2.8 [ 34s] [88/119] installing elfutils-0.153-5.28 [ 34s] [89/119] installing glibc-devel-2.20-12.1 [ 35s] [90/119] installing libxslt-tools-1.1.29-2.8 [ 35s] [91/119] installing pam-modules-extra-1.1.6-4.8 [ 35s] [92/119] installing perl-5.20.0-3.61 [ 49s] [93/119] installing sgml-skel-0.6-5.1 [ 49s] [94/119] installing gcc-4.9.2-15.1 [ 52s] [95/119] installing python-2.7.8-3.6 [ 53s] [96/119] installing util-linux-2.28-8.1 [ 54s] [97/119] installing build-mkbaselibs-20120927-1.3 [ 54s] [98/119] installing perl-Error-0.17017-5.2 [ 54s] [99/119] installing iso_ent-2000.11.03-6.1 [ 54s] [100/119] installing qemu-accel-aarch64-0.4-9.7 [ 63s] [101/119] installing autoconf-2.69-1.4 [ 65s] [102/119] installing python-xml-2.7.8-3.6 [ 67s] [103/119] installing util-linux-su-2.28-8.1 [ 68s] [104/119] installing xmlcharent-0.3-5.3 [ 68s] [105/119] installing openssh-6.6p1-7.3 [ 69s] Usage: groupadd [options] GROUP [ 69s] [ 69s] Options: [ 69s] -f, --force exit successfully if the group already exists, [ 69s] and cancel -g if the GID is already used [ 69s] -g, --gid GID use GID for the new group [ 69s] -h, --help display this help message and exit [ 69s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 69s] -o, --non-unique allow to create groups with duplicate [ 69s] (non-unique) GID [ 69s] -p, --password PASSWORD use this encrypted password for the new group [ 69s] -r, --system create a system account [ 69s] [ 70s] [106/119] installing automake-1.14.1-1.4 [ 70s] [107/119] installing build-20120927-1.3 [ 71s] [108/119] installing docbook_4-4.5-6.4 [ 72s] [109/119] installing git-core-2.0.1-6.67 [ 73s] [110/119] installing git-2.0.1-6.67 [ 73s] [111/119] installing libtool-2.4.2-3.6 [ 74s] [112/119] installing docbook-xsl-stylesheets-1.78.1-6.62 [ 75s] [113/119] installing asciidoc-8.6.6-6.2 [ 75s] [114/119] installing nss-3.23-4.46 [ 75s] [115/119] installing libsoftokn3-3.23-4.46 [ 76s] [116/119] installing rpm-4.11.0.1-9.2 [ 82s] [117/119] installing rpmlint-mini-1.5-3.26 [ 82s] [118/119] installing rpm-build-4.11.0.1-9.2 [ 83s] [119/119] installing rpmlint-tizen-1.0-1.3 [ 83s] removing nis flags from //etc/nsswitch.conf... [ 83s] now finalizing build dir... [ 84s] qemu: Unsupported syscall: 219 [ 90s] build target is aarch64-tizen-linux [ 90s] ----------------------------------------------------------------- [ 90s] I have the following modifications for dracut.spec: [ 90s] 9c9 [ 90s] < Release: 0 [ 90s] --- [ 90s] > Release: 1.53 [ 90s] 256a257 [ 90s] > %changelog [ 90s] ----------------------------------------------------------------- [ 90s] ----- building dracut.spec (user abuild) [ 90s] ----------------------------------------------------------------- [ 90s] ----------------------------------------------------------------- [ 90s] Running qemu build hang workaround... [ 90s] /bin/ps command not found [ 91s] qemu: Unsupported syscall: 219 [ 91s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common/arm64-wayland/c34a9884c2a3ec235c11218dfe7cf25e-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 91s] Building target platforms: aarch64-tizen-linux [ 91s] Building for target aarch64-tizen-linux [ 91s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.RFtusi [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + rm -rf dracut-032 [ 91s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 91s] + /bin/tar -xf - [ 91s] + STATUS=0 [ 91s] + '[' 0 -ne 0 ']' [ 91s] + cd dracut-032 [ 91s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 91s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 91s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 91s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 91s] + /bin/patch -p1 --fuzz=2 [ 91s] patching file Makefile [ 91s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 91s] + exit 0 [ 91s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.LzorGi [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd dracut-032 [ 91s] ++ uname -m [ 91s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 91s] + ref=/usr/lib/rpm [ 91s] + for s in guess sub [ 91s] ++ find -maxdepth 8 -name config.guess [ 91s] + for s in guess sub [ 91s] ++ find -maxdepth 8 -name config.sub [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + LDFLAGS= [ 91s] + export LDFLAGS [ 91s] + LD_AS_NEEDED=1 [ 91s] + export LD_AS_NEEDED [ 91s] + make all [ 91s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 91s] install/dracut-install.c: In function 'resolve_deps': [ 91s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 91s] read(fd, buf, LINE_MAX); [ 91s] ^ [ 91s] install/dracut-install.c: In function 'cp': [ 91s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 91s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 91s] ^ [ 91s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 91s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 92s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 92s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 92s] ln -fs install/dracut-install dracut-install [ 92s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 96s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 97s] Note: Writing lsinitrd.1 [ 97s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 105s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 105s] Note: Writing dracut.conf.5 [ 105s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 128s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 129s] Note: Writing dracut.cmdline.7 [ 129s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 132s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 132s] Note: Writing dracut.bootup.7 [ 132s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 148s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 148s] Note: Writing dracut.8 [ 149s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 153s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 153s] Note: Writing dracut-catimages.8 [ 153s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 158s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 158s] Note: Writing mkinitrd.8 [ 158s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 162s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 162s] Note: Writing dracut-cmdline.service.8 [ 162s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 166s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 166s] Note: Writing dracut-initqueue.service.8 [ 167s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 170s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 171s] Note: Writing dracut-mount.service.8 [ 171s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 175s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 175s] Note: Writing dracut-shutdown.service.8 [ 175s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 179s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 179s] Note: Writing dracut-pre-mount.service.8 [ 179s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 183s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 183s] Note: Writing dracut-pre-pivot.service.8 [ 183s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 187s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 187s] Note: Writing dracut-pre-trigger.service.8 [ 187s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 191s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 191s] Note: Writing dracut-pre-udev.service.8 [ 191s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 254s] xsltproc -o dracut.html --xinclude -nonet \ [ 254s] --stringparam html.stylesheet \ [ 254s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 254s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 254s] rm -f -- dracut.xml [ 254s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 254s] + exit 0 [ 254s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.IKrzuV [ 254s] + umask 022 [ 254s] + cd /home/abuild/rpmbuild/BUILD [ 254s] + cd dracut-032 [ 254s] + LANG=C [ 254s] + export LANG [ 254s] + unset DISPLAY [ 254s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 [ 254s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 [ 254s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 254s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut [ 254s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/bin [ 254s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/etc [ 254s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/modules.d [ 254s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man8 [ 254s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/bin/dracut [ 254s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/bin/dracut-catimages [ 254s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/bin/mkinitrd [ 254s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/bin/lsinitrd [ 254s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/etc/dracut.conf [ 254s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/etc/dracut.conf.d [ 254s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut.conf.d [ 254s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut-functions.sh [ 254s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut-version.sh [ 254s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut-functions [ 254s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut-logger.sh [ 254s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut-initramfs-restore [ 254s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut [ 254s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man1/${i##*/}; done [ 254s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man5/${i##*/}; done [ 255s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man7/${i##*/}; done [ 255s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man8/${i##*/}; done [ 255s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/man/man7/dracut.kernel.7 [ 255s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 255s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/systemd/system; \ [ 255s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 255s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/systemd/system/shutdown.target.wants; \ [ 255s] ln -s ../dracut-shutdown.service \ [ 255s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 255s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/systemd/system/initrd.target.wants; \ [ 255s] for i in \ [ 255s] dracut-cmdline.service \ [ 255s] dracut-initqueue.service \ [ 255s] dracut-mount.service \ [ 255s] dracut-pre-mount.service \ [ 255s] dracut-pre-pivot.service \ [ 255s] dracut-pre-trigger.service \ [ 255s] dracut-pre-udev.service \ [ 255s] ; do \ [ 255s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 255s] ln -s ../$i \ [ 255s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 255s] done \ [ 255s] fi [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] if [ -f install/dracut-install ]; then \ [ 255s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut-install; \ [ 255s] fi [ 255s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/kernel/install.d [ 255s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/kernel/install.d/50-dracut.install [ 255s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/kernel/install.d/51-dracut-rescue.install [ 255s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/bash-completion/completions [ 255s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/bash-completion/completions/dracut [ 255s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/bash-completion/completions/lsinitrd [ 255s] + echo DRACUT_VERSION=032-1.53 [ 255s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64//usr/lib/dracut/modules.d/01fips [ 255s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64//usr/lib/dracut/modules.d/02fips-aesni [ 255s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64//usr/lib/dracut/modules.d/50gensplash [ 255s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64//usr/lib/dracut/modules.d/96securityfs [ 255s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64//usr/lib/dracut/modules.d/97masterkey [ 255s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64//usr/lib/dracut/modules.d/98integrity [ 255s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64//usr/lib/dracut/modules.d/98selinux [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/boot/dracut [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/var/lib/dracut/overlay [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/var/log [ 255s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/var/log/dracut.log [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/com/initramfs [ 255s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/etc/dracut.conf.d/01-dist.conf [ 255s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/etc/logrotate.d [ 255s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/etc/logrotate.d/dracut_log [ 255s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 255s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/lib/dracut/dracut-install [ 260s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 260s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 260s] cpio: glibc-2.20/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 260s] cpio: glibc-2.20/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 260s] cpio: glibc-2.20/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 260s] 195 blocks [ 260s] + /usr/lib/rpm/check-buildroot [ 260s] + /usr/lib/rpm//brp-compress [ 260s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 261s] + /usr/lib/rpm/brp-python-hardlink [ 261s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 [ 261s] Processing files: dracut-032-1.53.aarch64 [ 261s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 261s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 261s] [ 261s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.vCbjnP [ 261s] + umask 022 [ 261s] + cd /home/abuild/rpmbuild/BUILD [ 261s] + cd dracut-032 [ 261s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/licenses/dracut [ 261s] + export LICENSEDIR [ 261s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/licenses/dracut [ 261s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64/usr/share/licenses/dracut [ 261s] + exit 0 [ 262s] Provides: config(dracut) = 032-1.53 dracut = 032-1.53 dracut(aarch-64) = 032-1.53 [ 262s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 262s] Requires: /bin/bash /bin/sh ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libgcc_s.so.1(GCC_3.3.1)(64bit) [ 262s] Conflicts: systemd < 187 [ 262s] Processing files: dracut-debugsource-032-1.53.aarch64 [ 262s] Provides: dracut-debugsource = 032-1.53 dracut-debugsource(aarch-64) = 032-1.53 [ 262s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 262s] Processing files: dracut-network-032-1.53.aarch64 [ 262s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 262s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 262s] [ 262s] Provides: dracut-network = 032-1.53 dracut-network(aarch-64) = 032-1.53 [ 262s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 262s] Requires: /bin/bash /bin/sh [ 262s] Processing files: dracut-caps-032-1.53.aarch64 [ 262s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 262s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 262s] [ 262s] Provides: dracut-caps = 032-1.53 dracut-caps(aarch-64) = 032-1.53 [ 262s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 262s] Requires: /bin/bash [ 262s] Processing files: dracut-tools-032-1.53.aarch64 [ 262s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 262s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 262s] [ 262s] Provides: dracut-tools = 032-1.53 dracut-tools(aarch-64) = 032-1.53 [ 262s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 262s] Requires: /bin/bash [ 262s] Processing files: dracut-debuginfo-032-1.53.aarch64 [ 262s] Provides: dracut-debuginfo = 032-1.53 dracut-debuginfo(aarch-64) = 032-1.53 [ 262s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 262s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 [ 262s] warning: Could not canonicalize hostname: w13 [ 262s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-1.53.src.rpm [ 262s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dracut-032-1.53.aarch64.rpm [ 262s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dracut-debugsource-032-1.53.aarch64.rpm [ 262s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dracut-network-032-1.53.aarch64.rpm [ 262s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dracut-caps-032-1.53.aarch64.rpm [ 262s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dracut-tools-032-1.53.aarch64.rpm [ 263s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dracut-debuginfo-032-1.53.aarch64.rpm [ 263s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.tMe7Bt [ 263s] + umask 022 [ 263s] + cd /home/abuild/rpmbuild/BUILD [ 263s] + cd dracut-032 [ 263s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.53.aarch64 [ 263s] + exit 0 [ 263s] ... checking for files with abuild user/group [ 263s] [ 263s] RPMLINT report: [ 263s] =============== [ 263s] qemu: Unsupported syscall: 219 [ 264s] dracut.aarch64: W: tizen-filelist-forbidden-fhs23 /usr/com is not allowed in FHS 2.3 [ 264s] see http://www.pathname.com/fhs/ to find a better location [ 264s] [ 264s] dracut.aarch64: W: script-without-shebang /usr/lib/dracut/dracut-version.sh [ 264s] This text file has executable bits set or is located in a path dedicated for [ 264s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 264s] meant to be an executable script, add the shebang, otherwise remove the [ 264s] executable bits or move the file elsewhere. [ 264s] [ 264s] dracut-network.aarch64: W: non-executable-script /usr/lib/dracut/modules.d/40network/net-lib.sh 0644L /bin/sh [ 264s] dracut-network.aarch64: W: non-executable-script /usr/lib/dracut/modules.d/40network/parse-vlan.sh 0644L /bin/sh [ 264s] dracut.aarch64: W: non-executable-script /usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh 0644L /bin/sh [ 264s] dracut.aarch64: W: non-executable-script /usr/share/bash-completion/completions/lsinitrd 0644L /bin/bash [ 264s] dracut.aarch64: W: non-executable-script /usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh 0644L /bin/sh [ 264s] dracut.aarch64: W: non-executable-script /usr/lib/dracut/modules.d/50drm/module-setup.sh 0644L /bin/bash [ 264s] dracut.aarch64: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/module-setup.sh 0644L /bin/bash [ 264s] dracut.aarch64: W: non-executable-script /usr/share/bash-completion/completions/dracut 0644L /bin/bash [ 264s] dracut.aarch64: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/load-modsign-keys.sh 0644L /bin/sh [ 264s] This text file contains a shebang or is located in a path dedicated for [ 264s] executables, but lacks the executable bits and cannot thus be executed. If [ 264s] the file is meant to be an executable script, add the executable bits, [ 264s] otherwise remove the shebang or move the file elsewhere. [ 264s] [ 264s] dracut.aarch64: W: missing-dependency-to-logrotate for logrotate script /etc/logrotate.d/dracut_log [ 264s] This package installs a file in /etc/logrotate.d/ but doesn't require [ 264s] logrotate to be installed. Because logrotate is not part of the essential [ 264s] packages, your package should explicitely depend on logrotate to make sure [ 264s] that your logrotate job is executed. If it is an optional feature of your [ 264s] package, recommend or suggest logrotate. [ 264s] [ 264s] dracut.src: W: invalid-url Source0: dracut-032.tar.xz [ 264s] The value should be a valid, public HTTP, HTTPS, or FTP URL. [ 264s] [ 264s] dracut.aarch64: W: incoherent-logrotate-file /etc/logrotate.d/dracut_log [ 264s] Your logrotate file should be named /etc/logrotate.d/. [ 264s] [ 264s] dracut.aarch64: W: ghost-files-without-postin [ 264s] dracut-caps.aarch64: W: explicit-lib-dependency libcap [ 264s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 264s] explicit Requires: tags. [ 264s] [ 264s] 5 packages and 0 specfiles checked; 0 errors, 16 warnings. [ 264s] [ 264s] ... creating baselibs [ 264s] qemu: Unsupported syscall: 219 [ 265s] ... comparing built packages with the former built [ 265s] /usr/lib/build/pkg-diff.sh [ 265s] compare /.build.oldpackages/dracut-032-1.52.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-1.53.src.rpm [ 265s] This is not a prerelease project. Compare the project name. [ 265s] comparing rpmtags [ 265s] comparing RELEASE [ 265s] comparing PROVIDES [ 265s] comparing scripts [ 265s] comparing filelist [ 265s] comparing file checksum [ 265s] RPM meta information is identical [ 265s] compare /.build.oldpackages/dracut-032-1.52.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dracut-032-1.53.aarch64.rpm [ 265s] Comparing dracut-032-1.52.aarch64.rpm to dracut-032-1.53.aarch64.rpm [ 265s] This is not a prerelease project. Compare the project name. [ 265s] comparing rpmtags [ 265s] comparing RELEASE [ 265s] comparing PROVIDES [ 266s] comparing scripts [ 266s] comparing filelist [ 266s] comparing file checksum [ 266s] creating rename script [ 266s] RPM file checksum differs. [ 266s] Extracting packages [ 266s] /usr/lib/dracut/dracut-version.sh differs (ASCII text) [ 266s] --- old//usr/lib/dracut/dracut-version.sh 2016-10-12 16:31:02.000000000 +0000 [ 266s] +++ new//usr/lib/dracut/dracut-version.sh 2016-10-16 07:18:34.000000000 +0000 [ 266s] @@ -1 +1 @@ [ 266s] -DRACUT_VERSION=032-1.52 [ 266s] +DRACUT_VERSION=032-1.53 [ 266s] compare /.build.oldpackages/dracut-caps-032-1.52.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dracut-caps-032-1.53.aarch64.rpm [ 266s] Comparing dracut-caps-032-1.52.aarch64.rpm to dracut-caps-032-1.53.aarch64.rpm [ 266s] This is not a prerelease project. Compare the project name. [ 266s] comparing rpmtags [ 266s] comparing RELEASE [ 266s] comparing PROVIDES [ 266s] comparing scripts [ 266s] comparing filelist [ 267s] comparing file checksum [ 267s] creating rename script [ 267s] RPM meta information is identical [ 267s] compare /.build.oldpackages/dracut-debuginfo-032-1.52.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dracut-debuginfo-032-1.53.aarch64.rpm [ 267s] skipping -debuginfo package [ 267s] compare /.build.oldpackages/dracut-debugsource-032-1.52.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dracut-debugsource-032-1.53.aarch64.rpm [ 267s] Comparing dracut-debugsource-032-1.52.aarch64.rpm to dracut-debugsource-032-1.53.aarch64.rpm [ 267s] This is not a prerelease project. Compare the project name. [ 268s] comparing rpmtags [ 268s] comparing RELEASE [ 268s] comparing PROVIDES [ 268s] comparing scripts [ 268s] comparing filelist [ 269s] comparing file checksum [ 269s] creating rename script [ 270s] RPM meta information is identical [ 270s] compare /.build.oldpackages/dracut-network-032-1.52.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dracut-network-032-1.53.aarch64.rpm [ 270s] Comparing dracut-network-032-1.52.aarch64.rpm to dracut-network-032-1.53.aarch64.rpm [ 270s] This is not a prerelease project. Compare the project name. [ 271s] comparing rpmtags [ 271s] comparing RELEASE [ 272s] comparing PROVIDES [ 272s] comparing scripts [ 273s] comparing filelist [ 273s] comparing file checksum [ 273s] creating rename script [ 273s] RPM meta information is identical [ 273s] compare /.build.oldpackages/dracut-tools-032-1.52.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dracut-tools-032-1.53.aarch64.rpm [ 274s] Comparing dracut-tools-032-1.52.aarch64.rpm to dracut-tools-032-1.53.aarch64.rpm [ 274s] This is not a prerelease project. Compare the project name. [ 274s] comparing rpmtags [ 274s] comparing RELEASE [ 274s] comparing PROVIDES [ 274s] comparing scripts [ 274s] comparing filelist [ 274s] comparing file checksum [ 274s] creating rename script [ 274s] RPM file checksum differs. [ 274s] Extracting packages [ 274s] Package content is identical [ 274s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 274s] ... saving built statistics [ 274s] ... saving built packages [ 275s] /home/abuild/rpmbuild/RPMS/aarch64/dracut-032-1.53.aarch64.rpm [ 275s] /home/abuild/rpmbuild/RPMS/aarch64/dracut-caps-032-1.53.aarch64.rpm [ 275s] /home/abuild/rpmbuild/RPMS/aarch64/dracut-debuginfo-032-1.53.aarch64.rpm [ 275s] /home/abuild/rpmbuild/RPMS/aarch64/dracut-debugsource-032-1.53.aarch64.rpm [ 275s] /home/abuild/rpmbuild/RPMS/aarch64/dracut-network-032-1.53.aarch64.rpm [ 275s] /home/abuild/rpmbuild/RPMS/aarch64/dracut-tools-032-1.53.aarch64.rpm [ 275s] /home/abuild/rpmbuild/SRPMS/dracut-032-1.53.src.rpm [ 275s] /home/abuild/rpmbuild/OTHER/_statistics [ 275s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 275s] [ 275s] w13 finished "build dracut.spec" at Sun Oct 16 07:18:54 UTC 2016. [ 275s] [ 278s] [ 259.219808] SysRq : Power Off [ 278s] [ 259.428221] Power down. [ 278s] build: extracting built packages... [ 279s] dracut-032-1.53.aarch64.rpm [ 279s] dracut-caps-032-1.53.aarch64.rpm [ 279s] dracut-debuginfo-032-1.53.aarch64.rpm [ 279s] dracut-debugsource-032-1.53.aarch64.rpm [ 279s] dracut-network-032-1.53.aarch64.rpm [ 279s] dracut-tools-032-1.53.aarch64.rpm [ 279s] dracut-032-1.53.src.rpm [ 279s] _statistics [ 279s] rpmlint.log