[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w05 started "build _service:gbs:libpciaccess.spec" at Thu Jul 21 14:36:29 UTC 2016. [ 0s] [ 0s] Building libpciaccess for project 'Tizen:Common:3.0b:artik' repository 'arm-wayland' arch 'armv7l' srcmd5 '12e28c5cb58eab4725431f6d183fdb8c' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:libpciaccess.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:libpciaccess.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:libpciaccess.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/39] preinstalling libmagic-data... [ 0s] [2/39] preinstalling setup... [ 0s] [3/39] preinstalling filesystem... [ 0s] [4/39] preinstalling glibc... [ 0s] [5/39] preinstalling libgcc... [ 0s] [6/39] preinstalling bash... [ 0s] [7/39] preinstalling diffutils... [ 0s] [8/39] preinstalling grep... [ 0s] [9/39] preinstalling libattr... [ 0s] [10/39] preinstalling libbz2... [ 0s] [11/39] preinstalling libcap... [ 0s] [12/39] preinstalling libelf... [ 0s] [13/39] preinstalling libfreebl3... [ 1s] [14/39] preinstalling liblua... [ 1s] [15/39] preinstalling liblzma... [ 1s] [16/39] preinstalling libncurses... [ 1s] [17/39] preinstalling libpopt... [ 1s] [18/39] preinstalling libsmack... [ 1s] [19/39] preinstalling libsqlite... [ 1s] [20/39] preinstalling libuuid... [ 1s] [21/39] preinstalling nspr... [ 1s] [22/39] preinstalling sed... [ 1s] [23/39] preinstalling zlib... [ 1s] [24/39] preinstalling qemu-accel-armv7l... [ 3s] [25/39] preinstalling qemu-linux-user-cross... [ 4s] [26/39] preinstalling coreutils... [ 4s] [27/39] preinstalling libacl... [ 4s] [28/39] preinstalling libblkid... [ 4s] [29/39] preinstalling libreadline... [ 4s] [30/39] preinstalling smack... [ 4s] [31/39] preinstalling bzip2... [ 4s] [32/39] preinstalling libmagic... [ 4s] [33/39] preinstalling libxml2... [ 4s] [34/39] preinstalling libmount... [ 4s] [35/39] preinstalling tar... [ 4s] [36/39] preinstalling util-linux... [ 4s] [37/39] preinstalling nss... [ 4s] [38/39] preinstalling libsoftokn3... [ 4s] [39/39] preinstalling rpm... [ 4s] [ 4s] [1/9] preinstalling libext2fs... [ 4s] [2/9] preinstalling libpcre... [ 4s] [3/9] preinstalling libsmartcols... [ 4s] [4/9] preinstalling libuuid... [ 4s] [5/9] preinstalling perl... [ 5s] [6/9] preinstalling grep... [ 5s] [7/9] preinstalling libblkid... [ 5s] [8/9] preinstalling libmount... [ 5s] [9/9] preinstalling util-linux... [ 5s] copying packages... [ 5s] reordering...cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] done [ 6s] booting kvm ... [ 6s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 8 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4987/4194304 files, 349069/16777216 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] swapon /dev/vdb [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] mount: none is already mounted or /proc busy [ 9s] mount: none is already mounted or /dev/pts busy [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/_service:gbs:libpciaccess.spec ... [ 9s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libpciaccess.spec build rpmlint-Factory ... [ 9s] running qemu-linux-user-cross postinstall script [ 9s] running qemu-accel-armv7l postinstall script [ 10s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 10s] [1/92] installing libmagic-data-5.18-1.12 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [2/92] installing setup-0.9-2.23 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [3/92] installing terminfo-base-5.9-1.14 [ 10s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 10s] [4/92] installing filesystem-3.1-5.2 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [5/92] installing glibc-2.20-9.2 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [6/92] installing libatomic-4.9.2-11.5 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [7/92] installing libgcc-4.9.2-11.5 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [8/92] installing libgomp-4.9.2-11.5 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [9/92] installing bash-3.2.57-3.2 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [10/92] installing cpio-2.11-1.10 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [11/92] installing diffutils-3.3-1.11 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [12/92] installing findutils-4.3.8-2.11 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [13/92] installing hostname-3.12-1.8 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [14/92] installing libattr-2.4.47-1.13 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [15/92] installing libbz2-1.0.6-1.79 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [16/92] installing libcap-2.24-1.75 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [17/92] installing libelf-0.153-5.8 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [18/92] installing libext2fs-1.42.13-2.2 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [19/92] installing libfreebl3-3.23-4.19 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 11s] [20/92] installing libitm-4.9.2-11.5 [ 11s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [21/92] installing libltdl-2.4.2-3.2 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [22/92] installing liblua-5.1.4-1.15 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [23/92] installing liblzma-5.1.3-2.4 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [24/92] installing libpcre-8.31-1.15 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [25/92] installing libpopt-1.16-2.4 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [26/92] installing libsmack-1.2.0-4.2 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [27/92] installing libsmartcols-2.28-6.7 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [28/92] installing libsqlite-3.8.10.2-1.12 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [29/92] installing libstdc++-4.9.2-11.5 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [30/92] installing libuuid-2.28-6.7 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [31/92] installing m4-1.4.17-1.7 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [32/92] installing net-tools-2.0_20121208git-1.9 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [33/92] installing nspr-4.12-4.9 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [34/92] installing patch-2.7-1.9 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [35/92] installing pkg-config-0.28-1.11 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [36/92] installing sed-4.1c-2.5 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [37/92] installing update-alternatives-1.16.3-1.7 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [38/92] installing which-2.20-1.7 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [39/92] installing zlib-1.2.8-1.13 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [40/92] installing libncurses-5.9-1.14 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [41/92] installing build-compare-2015.04.28-1.80 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [42/92] installing libstdc++-devel-4.9.2-11.5 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [43/92] installing qemu-linux-user-cross-2.2.0-1.2.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [44/92] installing util-macros-1.19.0-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [45/92] installing cpp-4.9.2-11.5 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [46/92] installing gcc-c++-4.9.2-11.5 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [47/92] installing binutils-2.25-5.9 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [48/92] installing coreutils-6.9-7.4 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [49/92] installing db4-4.8.30.NC-1.16 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [50/92] installing gawk-3.1.5-2.9 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [51/92] installing grep-2.5.2-2.9 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [52/92] installing less-466-1.9 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [53/92] installing libacl-2.2.52-3.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [54/92] installing libasm-0.153-5.8 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [55/92] installing libblkid-2.28-6.7 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [56/92] installing libreadline-5.2-2.3 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [57/92] installing libubsan-4.9.2-11.5 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [58/92] installing make-4.0-1.9 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [59/92] installing nss-certs-3.23-4.19 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [60/92] installing smack-1.2.0-4.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [61/92] installing bzip2-1.0.6-1.79 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [62/92] installing libmagic-5.18-1.12 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [63/92] installing libxml2-2.8.0-4.2 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [64/92] installing xz-5.1.3-2.4 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [65/92] installing libdw-0.153-5.8 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [66/92] installing linux-glibc-devel-3.10-1.3 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [67/92] installing file-5.18-1.12 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [68/92] installing glibc-locale-2.20-9.2 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [69/92] installing libmount-2.28-6.7 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [70/92] installing tar-1.17-2.7 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [71/92] installing gzip-1.3.12-2.12 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [72/92] installing libfdisk1-2.28-6.7 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [73/92] installing pam-1.1.6-4.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [74/92] installing perl-5.20.0-3.42 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [75/92] installing tzdata-2014h-1.8 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [76/92] installing elfutils-0.153-5.8 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [77/92] installing gcc-4.9.2-11.5 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [78/92] installing build-mkbaselibs-20120927-1.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [79/92] installing glibc-devel-2.20-9.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [80/92] installing qemu-accel-armv7l-0.4-7.8 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [81/92] installing autoconf-2.69-1.5 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [82/92] installing util-linux-2.28-6.7 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [83/92] installing zlib-devel-1.2.8-1.13 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [84/92] installing automake-1.14.1-1.4 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [85/92] installing build-20120927-1.3 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [86/92] installing libtool-2.4.2-3.2 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [87/92] installing nss-3.23-4.19 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [88/92] installing libsoftokn3-3.23-4.19 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [89/92] installing rpm-4.11.0.1-7.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [90/92] installing rpmlint-mini-1.5-3.17 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [91/92] installing rpm-build-4.11.0.1-7.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [92/92] installing rpmlint-tizen-1.0-1.3 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] removing nis flags from //etc/nsswitch.conf... [ 25s] now finalizing build dir... [ 26s] qemu: Unsupported syscall: 311 [ 31s] Warning: spec file parser line 59: macro too deeply nested [ 34s] Warning: spec file parser line 60: macro too deeply nested [ 38s] Warning: spec file parser line 72: macro too deeply nested [ 41s] Warning: spec file parser line 81: macro too deeply nested [ 44s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for libpciaccess.spec: [ 45s] 6c6 [ 45s] < Release: 0 [ 45s] --- [ 45s] > Release: 1.1 [ 45s] 82a83 [ 45s] > %changelog [ 45s] ----------------------------------------------------------------- [ 45s] ----- building libpciaccess.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 45s] qemu: Unsupported syscall: 311 [ 45s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common:3.0b:artik/arm-wayland/12e28c5cb58eab4725431f6d183fdb8c-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 45s] Building target platforms: armv7l-tizen-linux [ 45s] Building for target armv7l-tizen-linux [ 45s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.wqoRH9 [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + rm -rf libpciaccess-0.13.2 [ 45s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 45s] + /bin/tar -xf - [ 45s] + STATUS=0 [ 45s] + '[' 0 -ne 0 ']' [ 45s] + cd libpciaccess-0.13.2 [ 45s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 45s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 45s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-packaging-Bump-to-version-0.13.2.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/Makefile.am [ 45s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 45s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 45s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-initialize-buf-use-integer-variable-for-read.patch [ 45s] + /bin/patch -p1 --fuzz=2 [ 45s] patching file src/common_bridge.c [ 45s] patching file src/linux_sysfs.c [ 45s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 45s] + exit 0 [ 45s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.DiIkp0 [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd libpciaccess-0.13.2 [ 45s] ++ uname -m [ 45s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 45s] + LANG=C [ 45s] + export LANG [ 45s] + unset DISPLAY [ 45s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CFLAGS [ 45s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CXXFLAGS [ 45s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 45s] + export FFLAGS [ 45s] + LDFLAGS= [ 45s] + export LDFLAGS [ 45s] + LD_AS_NEEDED=1 [ 45s] + export LD_AS_NEEDED [ 45s] + NOCONFIGURE=1 [ 45s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CFLAGS [ 45s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CXXFLAGS [ 45s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 45s] + export FFLAGS [ 45s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 47s] autoreconf: Entering directory `.' [ 47s] autoreconf: configure.ac: not using Gettext [ 48s] autoreconf: running: aclocal -I m4 [ 53s] autoreconf: configure.ac: tracing [ 54s] autoreconf: running: libtoolize --copy [ 55s] libtoolize: putting auxiliary files in `.'. [ 55s] libtoolize: copying file `./ltmain.sh' [ 55s] libtoolize: putting macros in `m4'. [ 55s] libtoolize: copying file `m4/libtool.m4' [ 55s] libtoolize: copying file `m4/ltoptions.m4' [ 55s] libtoolize: copying file `m4/ltsugar.m4' [ 55s] libtoolize: copying file `m4/ltversion.m4' [ 55s] libtoolize: copying file `m4/lt~obsolete.m4' [ 55s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 55s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 60s] autoreconf: running: /usr/bin/autoconf [ 65s] autoreconf: running: /usr/bin/autoheader [ 66s] autoreconf: running: automake --add-missing --copy --no-force [ 69s] configure.ac:33: installing './compile' [ 69s] configure.ac:36: installing './config.guess' [ 69s] configure.ac:36: installing './config.sub' [ 69s] configure.ac:32: installing './install-sh' [ 69s] configure.ac:32: installing './missing' [ 70s] scanpci/Makefile.am: installing './depcomp' [ 71s] autoreconf: Leaving directory `.' [ 72s] checking for a BSD-compatible install... /bin/install -c [ 72s] checking whether build environment is sane... yes [ 72s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 72s] checking for gawk... gawk [ 72s] checking whether make sets $(MAKE)... yes [ 72s] checking whether make supports nested variables... yes [ 72s] checking for style of include used by make... GNU [ 72s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 72s] checking whether the C compiler works... yes [ 72s] checking for C compiler default output file name... a.out [ 72s] checking for suffix of executables... [ 72s] checking whether we are cross compiling... no [ 72s] checking for suffix of object files... o [ 72s] checking whether we are using the GNU C compiler... yes [ 72s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 72s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 72s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 72s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 72s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 72s] checking for grep that handles long lines and -e... /bin/grep [ 72s] checking for egrep... /bin/grep -E [ 72s] checking for ANSI C header files... yes [ 72s] checking for sys/types.h... yes [ 72s] checking for sys/stat.h... yes [ 72s] checking for stdlib.h... yes [ 72s] checking for string.h... yes [ 72s] checking for memory.h... yes [ 72s] checking for strings.h... yes [ 72s] checking for inttypes.h... yes [ 72s] checking for stdint.h... yes [ 72s] checking for unistd.h... yes [ 73s] checking minix/config.h usability... no [ 73s] checking minix/config.h presence... no [ 73s] checking for minix/config.h... no [ 73s] checking whether it is safe to define __EXTENSIONS__... yes [ 73s] checking build system type... armv7l-tizen-linux-gnueabi [ 73s] checking host system type... armv7l-tizen-linux-gnueabi [ 73s] checking how to print strings... printf [ 73s] checking for a sed that does not truncate output... /bin/sed [ 73s] checking for fgrep... /bin/grep -F [ 73s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 73s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 73s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 73s] checking the name lister (/bin/nm -B) interface... BSD nm [ 73s] checking whether ln -s works... yes [ 73s] checking the maximum length of command line arguments... 1572864 [ 73s] checking whether the shell understands some XSI constructs... yes [ 73s] checking whether the shell understands "+="... yes [ 73s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 73s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 73s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 73s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 73s] checking for objdump... objdump [ 73s] checking how to recognize dependent libraries... pass_all [ 73s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 73s] checking for dlltool... no [ 73s] checking how to associate runtime and link libraries... printf %s\n [ 73s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 73s] checking for ar... ar [ 73s] checking for archiver @FILE support... @ [ 73s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 73s] checking for strip... strip [ 73s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 73s] checking for ranlib... ranlib [ 73s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 73s] checking for sysroot... no [ 73s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 73s] checking for mt... no [ 73s] checking if : is a manifest tool... no [ 73s] checking for dlfcn.h... yes [ 73s] checking for objdir... .libs [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 73s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 73s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 73s] checking whether -lc should be explicitly linked in... no [ 73s] checking dynamic linker characteristics... GNU/Linux ld.so [ 73s] checking how to hardcode library paths into programs... immediate [ 73s] checking whether stripping libraries is possible... yes [ 73s] checking if libtool supports shared libraries... yes [ 73s] checking whether to build shared libraries... yes [ 73s] checking whether to build static libraries... yes [ 73s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C99... -std=gnu99 [ 73s] checking whether __clang__ is declared... no [ 73s] checking whether __INTEL_COMPILER is declared... no [ 73s] checking whether __SUNPRO_C is declared... no [ 73s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 73s] checking pkg-config is at least version 0.9.0... yes [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 73s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wall... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wpointer-arith... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-declarations... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wformat=2... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wstrict-prototypes... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-prototypes... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wnested-externs... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wbad-function-cast... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wold-style-definition... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wdeclaration-after-statement... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wunused... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wuninitialized... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wshadow... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-noreturn... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-format-attribute... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wredundant-decls... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wlogical-op... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=implicit... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=nonnull... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=init-self... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=main... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=missing-braces... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=sequence-point... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=return-type... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=trigraphs... yes [ 74s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=array-bounds... yes [ 75s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=write-strings... yes [ 75s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=address... yes [ 75s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=int-to-pointer-cast... yes [ 75s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=pointer-to-int-cast... yes [ 75s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -pedantic... yes [ 75s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror... yes [ 75s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=attributes... yes [ 75s] checking whether make supports nested variables... (cached) yes [ 75s] checking for special C compiler options needed for large files... no [ 75s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 75s] checking err.h usability... yes [ 75s] checking err.h presence... yes [ 75s] checking for err.h... yes [ 75s] checking asm/mtrr.h usability... no [ 75s] checking asm/mtrr.h presence... no [ 75s] checking for asm/mtrr.h... no [ 75s] checking for struct pci_io.pi_sel.pc_domain... no [ 75s] checking that generated files are newer than configure... done [ 75s] configure: creating ./config.status [ 76s] config.status: creating Makefile [ 76s] config.status: creating include/Makefile [ 76s] config.status: creating man/Makefile [ 76s] config.status: creating src/Makefile [ 76s] config.status: creating scanpci/Makefile [ 76s] config.status: creating pciaccess.pc [ 76s] config.status: creating config.h [ 76s] config.status: executing depfiles commands [ 76s] config.status: executing libtool commands [ 76s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 76s] + export CFLAGS [ 76s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 76s] + export CXXFLAGS [ 76s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 76s] + export FFLAGS [ 76s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 77s] checking for a BSD-compatible install... /bin/install -c [ 77s] checking whether build environment is sane... yes [ 77s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 77s] checking for gawk... gawk [ 77s] checking whether make sets $(MAKE)... yes [ 77s] checking whether make supports nested variables... yes [ 77s] checking for style of include used by make... GNU [ 77s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 77s] checking whether the C compiler works... yes [ 77s] checking for C compiler default output file name... a.out [ 77s] checking for suffix of executables... [ 77s] checking whether we are cross compiling... no [ 77s] checking for suffix of object files... o [ 77s] checking whether we are using the GNU C compiler... yes [ 77s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 77s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 77s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 77s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 77s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 77s] checking for grep that handles long lines and -e... /bin/grep [ 77s] checking for egrep... /bin/grep -E [ 77s] checking for ANSI C header files... yes [ 77s] checking for sys/types.h... yes [ 77s] checking for sys/stat.h... yes [ 77s] checking for stdlib.h... yes [ 77s] checking for string.h... yes [ 77s] checking for memory.h... yes [ 77s] checking for strings.h... yes [ 77s] checking for inttypes.h... yes [ 78s] checking for stdint.h... yes [ 78s] checking for unistd.h... yes [ 78s] checking minix/config.h usability... no [ 78s] checking minix/config.h presence... no [ 78s] checking for minix/config.h... no [ 78s] checking whether it is safe to define __EXTENSIONS__... yes [ 78s] checking build system type... armv7l-tizen-linux-gnueabi [ 78s] checking host system type... armv7l-tizen-linux-gnueabi [ 78s] checking how to print strings... printf [ 78s] checking for a sed that does not truncate output... /bin/sed [ 78s] checking for fgrep... /bin/grep -F [ 78s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 78s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 78s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 78s] checking the name lister (/bin/nm -B) interface... BSD nm [ 78s] checking whether ln -s works... yes [ 78s] checking the maximum length of command line arguments... 1572864 [ 78s] checking whether the shell understands some XSI constructs... yes [ 78s] checking whether the shell understands "+="... yes [ 78s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 78s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 78s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 78s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 78s] checking for objdump... objdump [ 78s] checking how to recognize dependent libraries... pass_all [ 78s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 78s] checking for dlltool... no [ 78s] checking how to associate runtime and link libraries... printf %s\n [ 78s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 78s] checking for ar... ar [ 78s] checking for archiver @FILE support... @ [ 78s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 78s] checking for strip... strip [ 78s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 78s] checking for ranlib... ranlib [ 78s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 78s] checking for sysroot... no [ 78s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 78s] checking for mt... no [ 78s] checking if : is a manifest tool... no [ 78s] checking for dlfcn.h... yes [ 78s] checking for objdir... .libs [ 78s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 78s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 78s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 78s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 78s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 78s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 78s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 78s] checking whether -lc should be explicitly linked in... no [ 78s] checking dynamic linker characteristics... GNU/Linux ld.so [ 78s] checking how to hardcode library paths into programs... immediate [ 78s] checking whether stripping libraries is possible... yes [ 78s] checking if libtool supports shared libraries... yes [ 78s] checking whether to build shared libraries... yes [ 78s] checking whether to build static libraries... no [ 78s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C99... -std=gnu99 [ 78s] checking whether __clang__ is declared... no [ 78s] checking whether __INTEL_COMPILER is declared... no [ 78s] checking whether __SUNPRO_C is declared... no [ 78s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 79s] checking pkg-config is at least version 0.9.0... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wall... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wpointer-arith... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-declarations... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wformat=2... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wstrict-prototypes... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-prototypes... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wnested-externs... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wbad-function-cast... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wold-style-definition... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wdeclaration-after-statement... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wunused... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wuninitialized... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wshadow... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-noreturn... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wmissing-format-attribute... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wredundant-decls... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Wlogical-op... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=implicit... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=nonnull... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=init-self... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=main... yes [ 79s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=missing-braces... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=sequence-point... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=return-type... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=trigraphs... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=array-bounds... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=write-strings... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=address... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=int-to-pointer-cast... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=pointer-to-int-cast... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -pedantic... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=attributes... yes [ 80s] checking whether make supports nested variables... (cached) yes [ 80s] checking for gzopen in -lz... yes [ 80s] checking zlib.h usability... yes [ 80s] checking zlib.h presence... yes [ 80s] checking for zlib.h... yes [ 80s] checking for special C compiler options needed for large files... no [ 80s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 80s] checking err.h usability... yes [ 80s] checking err.h presence... yes [ 80s] checking for err.h... yes [ 80s] checking asm/mtrr.h usability... no [ 80s] checking asm/mtrr.h presence... no [ 80s] checking for asm/mtrr.h... no [ 80s] checking for struct pci_io.pi_sel.pc_domain... no [ 80s] checking that generated files are newer than configure... done [ 80s] configure: creating ./config.status [ 81s] config.status: creating Makefile [ 81s] config.status: creating include/Makefile [ 81s] config.status: creating man/Makefile [ 81s] config.status: creating src/Makefile [ 81s] config.status: creating scanpci/Makefile [ 81s] config.status: creating pciaccess.pc [ 81s] config.status: creating config.h [ 81s] config.status: executing depfiles commands [ 81s] config.status: executing libtool commands [ 81s] + make -j8 [ 81s] make all-recursive [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 81s] Making all in include [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 81s] make[2]: Nothing to be done for 'all'. [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 81s] Making all in man [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 81s] GEN scanpci.1 [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 81s] Making all in src [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 81s] CC common_bridge.lo [ 81s] CC common_iterator.lo [ 81s] CC common_init.lo [ 81s] CC common_io.lo [ 81s] CC common_capability.lo [ 81s] CC common_device_name.lo [ 81s] CC common_map.lo [ 81s] CC common_interface.lo [ 81s] CC common_vgaarb.lo [ 81s] common_init.c: In function 'pci_system_cleanup': [ 81s] common_init.c:101:3: warning: 'pci_device_unmap_region' is deprecated (declared at ../include/pciaccess.h:88) [-Wdeprecated-declarations] [ 81s] (void) pci_device_unmap_region( & pci_sys->devices[i].base, j ); [ 81s] ^ [ 81s] CC linux_sysfs.lo [ 81s] CC linux_devmem.lo [ 81s] linux_sysfs.c: In function 'pci_device_linux_sysfs_probe': [ 81s] linux_sysfs.c:250:10: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 81s] int ret; [ 81s] ^ [ 81s] linux_sysfs.c: In function 'pci_device_linux_sysfs_map_range': [ 81s] linux_sysfs.c:541:9: warning: unused variable 'err' [-Wunused-variable] [ 81s] int err = 0; [ 81s] ^ [ 81s] linux_sysfs.c: In function 'pci_device_linux_sysfs_write8': [ 81s] linux_sysfs.c:876:2: warning: ignoring return value of 'pwrite', declared with attribute warn_unused_result [-Wunused-result] [ 81s] pwrite(handle->fd, &data, 1, port + handle->base); [ 81s] ^ [ 81s] linux_sysfs.c: In function 'pci_device_linux_sysfs_write16': [ 81s] linux_sysfs.c:866:2: warning: ignoring return value of 'pwrite', declared with attribute warn_unused_result [-Wunused-result] [ 81s] pwrite(handle->fd, &data, 2, port + handle->base); [ 81s] ^ [ 81s] linux_sysfs.c: In function 'pci_device_linux_sysfs_write32': [ 81s] linux_sysfs.c:856:2: warning: ignoring return value of 'pwrite', declared with attribute warn_unused_result [-Wunused-result] [ 81s] pwrite(handle->fd, &data, 4, port + handle->base); [ 81s] ^ [ 81s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read8': [ 82s] linux_sysfs.c:844:2: warning: ignoring return value of 'pread', declared with attribute warn_unused_result [-Wunused-result] [ 82s] pread(handle->fd, &ret, 1, port + handle->base); [ 82s] ^ [ 82s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read16': [ 82s] linux_sysfs.c:831:2: warning: ignoring return value of 'pread', declared with attribute warn_unused_result [-Wunused-result] [ 82s] pread(handle->fd, &ret, 2, port + handle->base); [ 82s] ^ [ 82s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read32': [ 82s] linux_sysfs.c:818:2: warning: ignoring return value of 'pread', declared with attribute warn_unused_result [-Wunused-result] [ 82s] pread(handle->fd, &ret, 4, port + handle->base); [ 82s] ^ [ 82s] linux_sysfs.c: In function 'pci_device_linux_sysfs_enable': [ 82s] linux_sysfs.c:695:5: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 82s] write( fd, "1", 1 ); [ 82s] ^ [ 82s] linux_sysfs.c: In function 'pci_device_linux_sysfs_read_rom': [ 82s] linux_sysfs.c:339:5: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 82s] write( fd, "1", 1 ); [ 82s] ^ [ 82s] linux_sysfs.c:358:5: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 82s] write( fd, "0", 1 ); [ 82s] ^ [ 82s] CCLD libpciaccess.la [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 82s] Making all in scanpci [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 82s] CC scanpci.o [ 82s] CCLD scanpci [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 82s] + exit 0 [ 82s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.legUSC [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd libpciaccess-0.13.2 [ 82s] + LANG=C [ 82s] + export LANG [ 82s] + unset DISPLAY [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 82s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 82s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm//usr/share/license [ 82s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm//usr/share/license/libpciaccess [ 82s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm install [ 82s] Making install in include [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 82s] make[2]: Nothing to be done for 'install-exec-am'. [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 82s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 82s] Making install in man [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 82s] make[2]: Nothing to be done for 'install-exec-am'. [ 82s] make[2]: Nothing to be done for 'install-data-am'. [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 82s] Making install in src [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 82s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 82s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 82s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 82s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.la [ 82s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 82s] make[2]: Nothing to be done for 'install-data-am'. [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 82s] Making install in scanpci [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 82s] make[2]: Nothing to be done for 'install-exec-am'. [ 82s] make[2]: Nothing to be done for 'install-data-am'. [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 82s] make[2]: Nothing to be done for 'install-exec-am'. [ 82s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 82s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 82s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info/dir [ 82s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.la$' [ 82s] + xargs rm -f -- [ 82s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.a$' [ 82s] + xargs rm -f -- [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/packages [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess-0.13.2 [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/gtk-doc [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/man [ 82s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 82s] + xargs rm -f -- [ 82s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 82s] + xargs rm -f -- [ 82s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 82s] + xargs rm -f -- [ 82s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 82s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 83s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 83s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 83s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 83s] 235 blocks [ 83s] + /usr/lib/rpm/check-buildroot [ 83s] + /usr/lib/rpm//brp-compress [ 83s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 83s] + /usr/lib/rpm/brp-python-hardlink [ 83s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 83s] Processing files: libpciaccess-0.13.2-1.1.armv7l [ 83s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 83s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 83s] [ 83s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(armv7l-32) = 0.13.2-1.1 libpciaccess.so.0 [ 83s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires(post): /sbin/ldconfig [ 83s] Requires(postun): /sbin/ldconfig [ 83s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 libz.so.1(ZLIB_1.2.3.3) rtld(GNU_HASH) [ 83s] Processing files: libpciaccess-debugsource-0.13.2-1.1.armv7l [ 83s] Provides: libpciaccess-debugsource = 0.13.2-1.1 libpciaccess-debugsource(armv7l-32) = 0.13.2-1.1 [ 83s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 83s] Processing files: libpciaccess-devel-0.13.2-1.1.armv7l [ 83s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 83s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 83s] [ 83s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(armv7l-32) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 83s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.armv7l [ 83s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(armv7l-32) = 0.13.2-1.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 83s] warning: Could not canonicalize hostname: w05 [ 83s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.2-1.1.armv7l.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.2-1.1.armv7l.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.2-1.1.armv7l.rpm [ 83s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5MLgmE [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd libpciaccess-0.13.2 [ 83s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 83s] + exit 0 [ 83s] ... checking for files with abuild user/group [ 83s] [ 83s] RPMLINT report: [ 83s] =============== [ 83s] qemu: Unsupported syscall: 311 [ 84s] libpciaccess.src: W: invalid-url Source0: libpciaccess-0.13.2.tar.bz2 [ 84s] The value should be a valid, public HTTP, HTTPS, or FTP URL. [ 84s] [ 84s] 3 packages and 0 specfiles checked; 0 errors, 1 warnings. [ 84s] [ 84s] ... creating baselibs [ 84s] qemu: Unsupported syscall: 311 [ 85s] no targets for arch armv7l, nothing to do [ 85s] ... saving built statistics [ 85s] ... saving built packages [ 85s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.2-1.1.armv7l.rpm [ 85s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.2-1.1.armv7l.rpm [ 85s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm [ 85s] /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.2-1.1.armv7l.rpm [ 85s] /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 85s] /home/abuild/rpmbuild/OTHER/_statistics [ 85s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 85s] [ 85s] w05 finished "build libpciaccess.spec" at Thu Jul 21 14:37:54 UTC 2016. [ 85s] [ 89s] [ 81.548091] SysRq : Power Off [ 89s] [ 81.668210] Power down. [ 89s] build: extracting built packages... [ 89s] libpciaccess-0.13.2-1.1.armv7l.rpm [ 89s] libpciaccess-debuginfo-0.13.2-1.1.armv7l.rpm [ 89s] libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm [ 89s] libpciaccess-devel-0.13.2-1.1.armv7l.rpm [ 89s] libpciaccess-0.13.2-1.1.src.rpm [ 89s] _statistics [ 89s] rpmlint.log