[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w21 started "build _service:gbs:perl-WWW-Curl.spec" at Thu Jul 21 14:38:38 UTC 2016. [ 0s] [ 0s] Building perl-WWW-Curl for project 'Tizen:Common:3.0b:artik' repository 'arm-wayland' arch 'armv7l' srcmd5 'f5b404edd2fa3d128e205260566c34ca' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:perl-WWW-Curl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/39] preinstalling libmagic-data... [ 1s] [2/39] preinstalling setup... [ 1s] [3/39] preinstalling filesystem... [ 1s] [4/39] preinstalling glibc... [ 1s] [5/39] preinstalling libgcc... [ 1s] [6/39] preinstalling bash... [ 1s] [7/39] preinstalling diffutils... [ 1s] [8/39] preinstalling grep... [ 1s] [9/39] preinstalling libattr... [ 1s] [10/39] preinstalling libbz2... [ 1s] [11/39] preinstalling libcap... [ 1s] [12/39] preinstalling libelf... [ 1s] [13/39] preinstalling libfreebl3... [ 1s] [14/39] preinstalling liblua... [ 1s] [15/39] preinstalling liblzma... [ 1s] [16/39] preinstalling libncurses... [ 1s] [17/39] preinstalling libpopt... [ 1s] [18/39] preinstalling libsmack... [ 1s] [19/39] preinstalling libsqlite... [ 1s] [20/39] preinstalling libuuid... [ 1s] [21/39] preinstalling nspr... [ 1s] [22/39] preinstalling sed... [ 1s] [23/39] preinstalling zlib... [ 1s] [24/39] preinstalling qemu-accel-armv7l... [ 4s] [25/39] preinstalling qemu-linux-user-cross... [ 4s] [26/39] preinstalling coreutils... [ 4s] [27/39] preinstalling libacl... [ 4s] [28/39] preinstalling libblkid... [ 4s] [29/39] preinstalling libreadline... [ 4s] [30/39] preinstalling smack... [ 4s] [31/39] preinstalling bzip2... [ 4s] [32/39] preinstalling libmagic... [ 4s] [33/39] preinstalling libxml2... [ 4s] [34/39] preinstalling libmount... [ 4s] [35/39] preinstalling tar... [ 4s] [36/39] preinstalling util-linux... [ 4s] [37/39] preinstalling nss... [ 5s] [38/39] preinstalling libsoftokn3... [ 5s] [39/39] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 5s] [6/9] preinstalling grep... [ 5s] [7/9] preinstalling libblkid... [ 5s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 6s] reordering...cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 9s] booting kvm ... [ 9s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 14s] Waiting for device /dev/vda to appear: ok [ 14s] fsck from util-linux 2.21.2 [ 14s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 14s] /dev/vda: clean, 5004/2392064 files, 236365/9568256 blocks [ 14s] fsck succeeded. Mounting root device read-write. [ 14s] Mounting root /dev/vda [ 14s] mount -o rw -t ext4 /dev/vda /root [ 14s] replacing /etc/mtab with symlink to /proc/self/mounts [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 14s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 14s] swapon /dev/vdb [ 14s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 15s] mount: none is already mounted or /proc busy [ 15s] mount: none is already mounted or /dev/pts busy [ 15s] logging output to //.build.log... [ 15s] processing specfile /.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 15s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 15s] running qemu-linux-user-cross postinstall script [ 15s] running qemu-accel-armv7l postinstall script [ 15s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 15s] running setup postinstall script [ 15s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 15s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 15s] initializing rpm db... [ 16s] [1/103] installing libmagic-data-5.18-1.12 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [2/103] installing setup-0.9-2.23 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [3/103] installing terminfo-base-5.9-1.14 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [4/103] installing filesystem-3.1-5.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [5/103] installing glibc-2.20-9.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [6/103] installing libatomic-4.9.2-11.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [7/103] installing libgcc-4.9.2-11.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [8/103] installing libgomp-4.9.2-11.5 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [9/103] installing bash-3.2.57-3.2 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [10/103] installing cpio-2.11-1.10 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [11/103] installing diffutils-3.3-1.11 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [12/103] installing findutils-4.3.8-2.11 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [13/103] installing hostname-3.12-1.8 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [14/103] installing libattr-2.4.47-1.13 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [15/103] installing libbz2-1.0.6-1.79 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [16/103] installing libcap-2.24-1.75 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [17/103] installing libcares-1.10.0-1.9 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [18/103] installing libelf-0.153-5.8 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [19/103] installing libext2fs-1.42.13-2.2 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [20/103] installing libfreebl3-3.23-4.19 [ 17s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 17s] [21/103] installing libidn-1.15-2.6 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [22/103] installing libitm-4.9.2-11.5 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [23/103] installing libltdl-2.4.2-3.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [24/103] installing liblua-5.1.4-1.15 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [25/103] installing liblzma-5.1.3-2.4 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [26/103] installing libpcre-8.31-1.15 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [27/103] installing libpopt-1.16-2.4 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [28/103] installing libsmack-1.2.0-4.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [29/103] installing libsmartcols-2.28-6.7 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [30/103] installing libsqlite-3.8.10.2-1.12 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [31/103] installing libstdc++-4.9.2-11.5 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [32/103] installing libuuid-2.28-6.7 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [33/103] installing m4-1.4.17-1.7 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [34/103] installing net-tools-2.0_20121208git-1.9 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [35/103] installing nspr-4.12-4.9 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [36/103] installing patch-2.7-1.9 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [37/103] installing pkg-config-0.28-1.11 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [38/103] installing sed-4.1c-2.5 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [39/103] installing update-alternatives-1.16.3-1.7 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [40/103] installing which-2.20-1.7 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [41/103] installing zlib-1.2.8-1.13 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [42/103] installing libncurses-5.9-1.14 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [43/103] installing build-compare-2015.04.28-1.80 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [44/103] installing libstdc++-devel-4.9.2-11.5 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [45/103] installing qemu-linux-user-cross-2.2.0-1.2.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [46/103] installing cpp-4.9.2-11.5 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [47/103] installing gcc-c++-4.9.2-11.5 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [48/103] installing binutils-2.25-5.9 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [49/103] installing coreutils-6.9-7.4 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [50/103] installing db4-4.8.30.NC-1.16 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [51/103] installing gawk-3.1.5-2.9 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [52/103] installing grep-2.5.2-2.9 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [53/103] installing less-466-1.9 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [54/103] installing libacl-2.2.52-3.2 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [55/103] installing libasm-0.153-5.8 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [56/103] installing libblkid-2.28-6.7 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [57/103] installing libopenssl-1.0.2g-7.9 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [58/103] installing libreadline-5.2-2.3 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [59/103] installing libubsan-4.9.2-11.5 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [60/103] installing make-4.0-1.9 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [61/103] installing nss-certs-3.23-4.19 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [62/103] installing smack-1.2.0-4.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [63/103] installing bzip2-1.0.6-1.79 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [64/103] installing libmagic-5.18-1.12 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [65/103] installing libxml2-2.8.0-4.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [66/103] installing xz-5.1.3-2.4 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [67/103] installing libdw-0.153-5.8 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [68/103] installing linux-glibc-devel-3.10-1.3 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [69/103] installing file-5.18-1.12 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [70/103] installing glibc-locale-2.20-9.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [71/103] installing libmount-2.28-6.7 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [72/103] installing openssl-1.0.2g-7.9 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [73/103] installing tar-1.17-2.7 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [74/103] installing gzip-1.3.12-2.12 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [75/103] installing libfdisk1-2.28-6.7 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [76/103] installing pam-1.1.6-4.2 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [77/103] installing perl-5.20.0-3.42 [ 31s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [78/103] installing tzdata-2014h-1.8 [ 31s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [79/103] installing libcurl-7.48.0-1.1 [ 31s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [80/103] installing elfutils-0.153-5.8 [ 31s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [81/103] installing gcc-4.9.2-11.5 [ 32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 32s] [82/103] installing build-mkbaselibs-20120927-1.3 [ 32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 32s] [83/103] installing perl-Devel-Symdump-2.08-1.3 [ 32s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 32s] [84/103] installing glibc-devel-2.20-9.2 [ 33s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] [85/103] installing qemu-accel-armv7l-0.4-7.8 [ 39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [86/103] installing autoconf-2.69-1.5 [ 39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [87/103] installing util-linux-2.28-6.7 [ 39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [88/103] installing perl-Pod-Coverage-0.22-1.3 [ 39s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [89/103] installing libcares-devel-1.10.0-1.9 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [90/103] installing libidn-devel-1.15-2.6 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [91/103] installing zlib-devel-1.2.8-1.13 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [92/103] installing automake-1.14.1-1.4 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [93/103] installing build-20120927-1.3 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [94/103] installing perl-Test-Pod-Coverage-1.08-1.3 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [95/103] installing libcurl-devel-7.48.0-1.1 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [96/103] installing libopenssl-devel-1.0.2g-7.9 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 41s] [97/103] installing libtool-2.4.2-3.2 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [98/103] installing nss-3.23-4.19 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [99/103] installing libsoftokn3-3.23-4.19 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [100/103] installing rpm-4.11.0.1-7.2 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [101/103] installing rpmlint-mini-1.5-3.17 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [102/103] installing rpm-build-4.11.0.1-7.2 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [103/103] installing rpmlint-tizen-1.0-1.3 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] removing nis flags from //etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 44s] qemu: Unsupported syscall: 311 [ 46s] Warning: spec file parser line 24: can't expand %(...) [ 46s] Warning: spec file parser line 30: can't expand %(...) [ 49s] build target is armv7l-tizen-linux [ 49s] ----------------------------------------------------------------- [ 49s] I have the following modifications for perl-WWW-Curl.spec: [ 49s] 18c18 [ 49s] < release: 4.1 [ 49s] --- [ 49s] > release: 1.1 [ 49s] ----------------------------------------------------------------- [ 49s] ----- building perl-WWW-Curl.spec (user abuild) [ 49s] ----------------------------------------------------------------- [ 49s] ----------------------------------------------------------------- [ 49s] qemu: Unsupported syscall: 311 [ 49s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common:3.0b:artik/arm-wayland/f5b404edd2fa3d128e205260566c34ca-perl-WWW-Curl' /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.spec [ 49s] Building target platforms: armv7l-tizen-linux [ 49s] Building for target armv7l-tizen-linux [ 49s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ZMAAiF [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + rm -rf perl-WWW-Curl-4.05 [ 49s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl-4.05.tar.bz2 [ 49s] + /bin/tar -xvvf - [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/ [ 49s] -rw-rw-r-- root/root 11915 2013-07-01 18:58 perl-WWW-Curl-4.05/Changes [ 49s] -rw-rw-r-- root/root 31779 2013-07-01 18:58 perl-WWW-Curl-4.05/Curl.xs [ 49s] -rw-rw-r-- root/root 255 2013-07-01 18:58 perl-WWW-Curl-4.05/LICENSE [ 49s] -rw-rw-r-- root/root 963 2013-07-01 18:58 perl-WWW-Curl-4.05/MANIFEST [ 49s] -rw-rw-r-- root/root 487 2013-07-01 18:58 perl-WWW-Curl-4.05/META.yml [ 49s] -rw-rw-r-- root/root 8543 2013-07-01 18:58 perl-WWW-Curl-4.05/Makefile.PL [ 49s] -rw-rw-r-- root/root 2475 2013-07-01 18:58 perl-WWW-Curl-4.05/README [ 49s] -rw-rw-r-- root/root 673 2013-07-01 18:58 perl-WWW-Curl-4.05/README.Win32 [ 49s] -rw-rw-r-- root/root 4168 2013-07-01 18:58 perl-WWW-Curl-4.05/SIGNATURE [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/ [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/ [ 49s] -rw-rw-r-- root/root 8549 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install.pm [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/ [ 49s] -rw-rw-r-- root/root 1053 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Base.pm [ 49s] -rw-rw-r-- root/root 1788 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Can.pm [ 49s] -rw-rw-r-- root/root 1530 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/External.pm [ 49s] -rw-rw-r-- root/root 1094 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/MakeMaker.pm [ 49s] -rw-rw-r-- root/root 6225 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Makefile.pm [ 49s] -rw-rw-r-- root/root 9448 2013-07-01 18:58 perl-WWW-Curl-4.05/inc/Module/Install/Metadata.pm [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/ [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/ [ 49s] -rw-rw-r-- root/root 10200 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl.pm [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/ [ 49s] -rw-rw-r-- root/root 5242 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Easy.pm [ 49s] -rw-rw-r-- root/root 187 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Form.pm [ 49s] -rw-rw-r-- root/root 367 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Multi.pm [ 49s] -rw-rw-r-- root/root 1018 2013-07-01 18:58 perl-WWW-Curl-4.05/lib/WWW/Curl/Share.pm [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/ [ 49s] -rw-rw-r-- root/root 69 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.manifest [ 49s] -rw-rw-r-- root/root 3997 2013-07-01 18:58 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.spec [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/ [ 49s] -rw-rw-r-- root/root 152 2013-07-01 18:58 perl-WWW-Curl-4.05/t/00constants.t [ 49s] -rw-rw-r-- root/root 1630 2013-07-01 18:58 perl-WWW-Curl-4.05/t/01basic.t [ 49s] -rw-rw-r-- root/root 1192 2013-07-01 18:58 perl-WWW-Curl-4.05/t/02callbacks.t [ 49s] -rw-rw-r-- root/root 1049 2013-07-01 18:58 perl-WWW-Curl-4.05/t/04abort-test.t [ 49s] -rw-rw-r-- root/root 1716 2013-07-01 18:58 perl-WWW-Curl-4.05/t/05progress.t [ 49s] -rw-rw-r-- root/root 1827 2013-07-01 18:58 perl-WWW-Curl-4.05/t/06http-post.t [ 49s] -rw-rw-r-- root/root 2103 2013-07-01 18:58 perl-WWW-Curl-4.05/t/07ftp-upload.t [ 49s] -rw-rw-r-- root/root 3243 2013-07-01 18:58 perl-WWW-Curl-4.05/t/08ssl.t [ 49s] -rw-rw-r-- root/root 1978 2013-07-01 18:58 perl-WWW-Curl-4.05/t/09times.t [ 49s] -rw-rw-r-- root/root 1284 2013-07-01 18:58 perl-WWW-Curl-4.05/t/10errbuf.t [ 49s] -rw-rw-r-- root/root 1133 2013-07-01 18:58 perl-WWW-Curl-4.05/t/13slowleak.t [ 49s] -rw-rw-r-- root/root 2178 2013-07-01 18:58 perl-WWW-Curl-4.05/t/14duphandle.t [ 49s] -rw-rw-r-- root/root 3153 2013-07-01 18:58 perl-WWW-Curl-4.05/t/15duphandle-callback.t [ 49s] -rw-rw-r-- root/root 2043 2013-07-01 18:58 perl-WWW-Curl-4.05/t/16formpost.t [ 49s] -rw-rw-r-- root/root 2236 2013-07-01 18:58 perl-WWW-Curl-4.05/t/17slist.t [ 49s] -rw-rw-r-- root/root 1547 2013-07-01 18:58 perl-WWW-Curl-4.05/t/18twinhandles.t [ 49s] -rw-rw-r-- root/root 134 2013-07-01 18:58 perl-WWW-Curl-4.05/t/meta.t [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/ [ 49s] -rw-rw-r-- root/root 95 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/00constants.t [ 49s] -rw-rw-r-- root/root 407 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/01basic.t [ 49s] -rw-rw-r-- root/root 456 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/02header-callback.t [ 49s] -rw-rw-r-- root/root 454 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/03body-callback.t [ 49s] -rw-rw-r-- root/root 422 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/04abort.t [ 49s] -rw-rw-r-- root/root 668 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/05progress.t [ 49s] -rw-rw-r-- root/root 727 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/06http-post.t [ 49s] -rw-rw-r-- root/root 205 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/07errbuf.t [ 49s] -rw-rw-r-- root/root 443 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/08duphandle.t [ 49s] -rw-rw-r-- root/root 489 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/09duphandle-callback.t [ 49s] -rw-rw-r-- root/root 1269 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/10multi-callback.t [ 49s] -rw-rw-r-- root/root 381 2013-07-01 18:58 perl-WWW-Curl-4.05/t/new/README [ 49s] -rw-rw-r-- root/root 232 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod-coverage.t [ 49s] -rw-rw-r-- root/root 140 2013-07-01 18:58 perl-WWW-Curl-4.05/t/pod.t [ 49s] drwxrwxr-x root/root 0 2013-07-01 18:58 perl-WWW-Curl-4.05/template/ [ 49s] -rw-rw-r-- root/root 1095 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Easy.pm.tmpl [ 49s] -rw-rw-r-- root/root 763 2013-07-01 18:58 perl-WWW-Curl-4.05/template/Share.pm.tmpl [ 49s] -rw-rw-r-- root/root 110 2013-07-01 18:58 perl-WWW-Curl-4.05/typemap [ 49s] + STATUS=0 [ 49s] + '[' 0 -ne 0 ']' [ 49s] + cd perl-WWW-Curl-4.05 [ 49s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 49s] + cp /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.manifest . [ 49s] + chmod -R u+w /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 49s] + exit 0 [ 49s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.kU90L5 [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd perl-WWW-Curl-4.05 [ 49s] ++ uname -m [ 49s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + LDFLAGS= [ 49s] + export LDFLAGS [ 49s] + LD_AS_NEEDED=1 [ 49s] + export LD_AS_NEEDED [ 49s] + grep -rsl '^#!.*perl' . [ 49s] + grep -v '.bak$' [ 49s] + xargs --no-run-if-empty /bin/perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)' [ 50s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 50s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr| if $ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ ' [ 51s] + /bin/perl Makefile.PL [ 52s] Locating required external dependency bin:curl-config... found at /bin/curl-config. [ 52s] Found curl.h in /usr/include/curl/curl.h [ 52s] Building curlopt-constants.c for your libcurl version [ 52s] Building Easy.pm constants for your libcurl version [ 52s] Building Share.pm constants for your libcurl version [ 53s] Checking if your kit is complete... [ 53s] Looks good [ 54s] Generating a Unix-style Makefile [ 54s] Writing Makefile for WWW::Curl [ 54s] Writing MYMETA.yml and MYMETA.json [ 54s] + /bin/make [ 57s] cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm [ 57s] cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm [ 57s] AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy) [ 57s] cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm [ 57s] AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share) [ 57s] cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm [ 57s] cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm [ 57s] Running Mkbootstrap for WWW::Curl () [ 57s] chmod 644 Curl.bs [ 57s] /usr/bin/perl "-Iinc" /usr/lib/perl5/5.20.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.20.0/ExtUtils/typemap -typemap typemap Curl.xs > Curl.xsc && mv Curl.xsc Curl.c [ 59s] cc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE" Curl.c [ 59s] Curl.xs: In function 'fwrite_wrapper2': [ 59s] Curl.xs:341:13: warning: unused variable 'sv' [-Wunused-variable] [ 59s] SV *sv; [ 59s] ^ [ 59s] In file included from Curl.xs:16:0: [ 59s] Curl.c: In function 'XS_WWW__Curl__Easy_init': [ 59s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:183:20: warning: unused variable 'ix' [-Wunused-variable] [ 59s] #define dXSI32 I32 ix = XSANY.any_i32 [ 59s] ^ [ 59s] Curl.c:747:5: note: in expansion of macro 'dXSI32' [ 59s] dXSI32; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Easy_version': [ 59s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:164:20: warning: unused variable 'items' [-Wunused-variable] [ 59s] #define dITEMS I32 items = (I32)(SP - MARK) [ 59s] ^ [ 59s] /usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/CORE/XSUB.h:172:16: note: in expansion of macro 'dITEMS' [ 59s] dSP; dAXMARK; dITEMS [ 59s] ^ [ 59s] Curl.c:865:11: note: in expansion of macro 'dXSARGS' [ 59s] dVAR; dXSARGS; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Easy_internal_setopt': [ 59s] Curl.c:1064:6: warning: unused variable 'value' [-Wunused-variable] [ 59s] int value = (int)SvIV(ST(2)) [ 59s] ^ [ 59s] Curl.c:1062:6: warning: unused variable 'option' [-Wunused-variable] [ 59s] int option = (int)SvIV(ST(1)) [ 59s] ^ [ 59s] Curl.c:1061:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 59s] WWW__Curl__Easy self; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Easy_cleanup': [ 59s] Curl.c:1220:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 59s] WWW__Curl__Easy self; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Easy_strerror': [ 59s] Curl.c:1291:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 59s] WWW__Curl__Easy self; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Form_add': [ 59s] Curl.c:1364:9: warning: unused variable 'value' [-Wunused-variable] [ 59s] char * value = (char *)SvPV_nolen(ST(2)) [ 59s] ^ [ 59s] Curl.c:1362:9: warning: unused variable 'name' [-Wunused-variable] [ 59s] char * name = (char *)SvPV_nolen(ST(1)) [ 59s] ^ [ 59s] Curl.c:1361:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 59s] WWW__Curl__Form self; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Form_addfile': [ 59s] Curl.c:1401:9: warning: unused variable 'type' [-Wunused-variable] [ 59s] char * type = (char *)SvPV_nolen(ST(3)) [ 59s] ^ [ 59s] Curl.c:1399:9: warning: unused variable 'description' [-Wunused-variable] [ 59s] char * description = (char *)SvPV_nolen(ST(2)) [ 59s] ^ [ 59s] Curl.c:1397:9: warning: unused variable 'filename' [-Wunused-variable] [ 59s] char * filename = (char *)SvPV_nolen(ST(1)) [ 59s] ^ [ 59s] Curl.c:1396:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 59s] WWW__Curl__Form self; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Multi_strerror': [ 59s] Curl.c:1706:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 59s] WWW__Curl__Multi self; [ 59s] ^ [ 59s] Curl.c: In function 'XS_WWW__Curl__Share_strerror': [ 59s] Curl.c:1874:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 59s] WWW__Curl__Share self; [ 59s] ^ [ 61s] rm -f blib/arch/auto/WWW/Curl/Curl.so [ 61s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe Curl.o -o blib/arch/auto/WWW/Curl/Curl.so \ [ 61s] -lcurl -lcares -lidn -lssl -lcrypto -lssl -lcrypto -lz \ [ 61s] [ 61s] chmod 755 blib/arch/auto/WWW/Curl/Curl.so [ 61s] /usr/bin/perl "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644 [ 62s] Manifying blib/man3/WWW::Curl.3pm [ 62s] + exit 0 [ 62s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.BjYoAg [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd perl-WWW-Curl-4.05 [ 62s] + LANG=C [ 62s] + export LANG [ 62s] + unset DISPLAY [ 62s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 62s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 62s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm '!=' / ']' [ 62s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 62s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print $ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr| : qq|DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm| ' [ 62s] + /bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr bindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/etc datadir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/com mandir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/info install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 63s] Running Mkbootstrap for WWW::Curl () [ 63s] chmod 644 Curl.bs [ 64s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 64s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/man/man3/WWW::Curl.3pm [ 64s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/5.20.0/armv7l-linux-thread-multi/perllocal.pod [ 65s] + cmd=/usr/share/spec-helper/compress_files [ 65s] + '[' -x /usr/share/spec-helper/compress_files ']' [ 65s] + cmd=/usr/lib/rpm/brp-compress [ 65s] + '[' -x /usr/lib/rpm/brp-compress ']' [ 65s] + /usr/lib/rpm/brp-compress [ 65s] + '[' -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ']' [ 65s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm -name perllocal.pod -o -name .packlist -o -name '*.bs' [ 65s] + xargs -i rm -f '{}' [ 65s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr -type d -depth -exec rmdir '{}' ';' [ 65s] + /bin/perl -MFile::Find -le ' [ 65s] find({ wanted => \&wanted, no_chdir => 1}, "/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm"); [ 65s] print "%doc README.Win32 template inc Changes README LICENSE"; [ 65s] for my $x (sort @dirs, @files) { [ 65s] push @ret, $x unless indirs($x); [ 65s] } [ 65s] print join "\n", sort @ret; [ 65s] [ 65s] sub wanted { [ 65s] return if /auto$/; [ 65s] [ 65s] local $_ = $File::Find::name; [ 65s] my $f = $_; s|^\Q/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm\E||; [ 65s] return unless length; [ 65s] return $files[@files] = $_ if -f $f; [ 65s] [ 65s] $d = $_; [ 65s] /\Q$d\E/ && return for reverse sort @INC; [ 65s] $d =~ /\Q$_\E/ && return [ 65s] for qw|/etc /usr/man /usr/bin /usr/share|; [ 65s] [ 65s] $dirs[@dirs] = $_; [ 65s] } [ 65s] [ 65s] sub indirs { [ 65s] my $x = shift; [ 65s] $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs; [ 65s] } [ 65s] ' [ 65s] + '[' -z WWW-Curl-4.05-filelist ']' [ 65s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 65s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 66s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 66s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 66s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 66s] 219 blocks [ 66s] + /usr/lib/rpm/check-buildroot [ 66s] + /usr/lib/rpm//brp-compress [ 66s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 66s] + /usr/lib/rpm/brp-python-hardlink [ 66s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 66s] Processing files: perl-WWW-Curl-4.05-1.1.armv7l [ 66s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 66s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 66s] [ 66s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.ab32NG [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd perl-WWW-Curl-4.05 [ 66s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + export DOCDIR [ 66s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + cp -pr README.Win32 /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + cp -pr template /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + cp -pr inc /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm/usr/share/doc/packages/perl-WWW-Curl [ 66s] + exit 0 [ 67s] Provides: Curl.so perl(Module::Install) = 0.75 perl(Module::Install::Base) = 0.75 perl(Module::Install::Base::FakeAdmin) perl(Module::Install::Can) = 0.75 perl(Module::Install::External) = 0.75 perl(Module::Install::MakeMaker) = 0.75 perl(Module::Install::Makefile) = 0.75 perl(Module::Install::Metadata) = 0.75 perl(WWW::Curl) = 4.05 perl(WWW::Curl::Easy) = 4.05 perl(WWW::Curl::Form) perl(WWW::Curl::Multi) perl(WWW::Curl::Share) perl-WWW-Curl = 4.05-1.1 perl-WWW-Curl(armv7l-32) = 4.05-1.1 [ 67s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 67s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 67s] Processing files: perl-WWW-Curl-debugsource-4.05-1.1.armv7l [ 67s] Provides: perl-WWW-Curl-debugsource = 4.05-1.1 perl-WWW-Curl-debugsource(armv7l-32) = 4.05-1.1 [ 67s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 67s] Processing files: perl-WWW-Curl-debuginfo-4.05-1.1.armv7l [ 67s] Provides: perl-WWW-Curl-debuginfo = 4.05-1.1 perl-WWW-Curl-debuginfo(armv7l-32) = 4.05-1.1 [ 67s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 67s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 67s] warning: Could not canonicalize hostname: w21 [ 67s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-1.1.src.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-1.1.armv7l.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-1.1.armv7l.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-1.1.armv7l.rpm [ 67s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.HZrKEh [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd perl-WWW-Curl-4.05 [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 67s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm '!=' / ']' [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-1.1.arm [ 67s] + exit 0 [ 67s] ... checking for files with abuild user/group [ 67s] [ 67s] RPMLINT report: [ 67s] =============== [ 68s] qemu: Unsupported syscall: 311 [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm is not allowed in Tizen [ 69s] perl-WWW-Curl.armv7l: W: tizen-filelist-forbidden-perl-dir /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW is not allowed in Tizen [ 69s] perl files installed a non-vendor installed path, [ 69s] which is not allowed in SUSE. [ 69s] [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl.pm [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Curl.so [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Form.pm [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Multi.pm [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Easy.pm [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/WWW/Curl/Share.pm [ 69s] perl-WWW-Curl.armv7l: W: siteperl-in-perl-module /usr/lib/perl5/site_perl/5.20.0/armv7l-linux-thread-multi/auto/WWW [ 69s] This perl module package installs files under the subdirectory site_perl, [ 69s] while they must appear under vendor_perl. [ 69s] [ 69s] perl-WWW-Curl.src:56: W: rpm-buildroot-usage %build %{__perl} Makefile.PL `%{__perl} -MExtUtils::MakeMaker -e ' print qq|PREFIX=%{buildroot}%{_prefix}| if \$ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ '` [ 69s] $RPM_BUILD_ROOT should not be touched during %build or %prep stage, as it may [ 69s] break short circuit builds. [ 69s] [ 69s] perl-WWW-Curl.armv7l: E: non-standard-group (Badness: 200) Applications/CPAN [ 69s] perl-WWW-Curl.src: E: non-standard-group (Badness: 200) Applications/CPAN [ 69s] The value of the Group tag in the package is not valid. Valid groups are [ 69s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 69s] [ 69s] perl-WWW-Curl.armv7l: W: non-linux-readme /usr/share/doc/packages/perl-WWW-Curl/README.Win32 [ 69s] Your package contains a file that contains instructions for non-linux [ 69s] platforms. They're most likely unneccessary bloat, consider removing them [ 69s] from your package. [ 69s] [ 69s] perl-WWW-Curl.src:59: W: make-check-outside-check-section %{__make} test [ 69s] Make check or other automated regression test should be run in %check, as they [ 69s] can be disabled with a rpm macro for short circuiting purposes. [ 69s] [ 69s] perl-WWW-Curl.armv7l: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/perl-WWW-Curl/LICENSE [ 69s] A file whose name suggests that it contains a license is included in the [ 69s] package as a document. Such files need to be marked with %license and not with [ 69s] %doc, which will install them in a special directory seperated from the [ 69s] documentation. [ 69s] [ 69s] perl-WWW-Curl.src: W: invalid-url Source0: perl-WWW-Curl-4.05.tar.bz2 [ 69s] The value should be a valid, public HTTP, HTTPS, or FTP URL. [ 69s] [ 69s] perl-WWW-Curl.armv7l: E: invalid-license (Badness: 200) Artistic [ 69s] perl-WWW-Curl.src: E: invalid-license (Badness: 200) Artistic [ 69s] The specified license string is not recognized. Please refer to [ 69s] http://spdx.org/licenses/ for the list of known licences and their exact [ 69s] spelling. [ 69s] [ 69s] perl-WWW-Curl.src:20: W: hardcoded-packager-tag Arix [ 69s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 69s] to use rebuilder's own defaults. [ 69s] [ 69s] perl-WWW-Curl.armv7l: W: explicit-lib-dependency libcurl [ 69s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 69s] explicit Requires: tags. [ 69s] [ 69s] 2 packages and 0 specfiles checked; 5 errors, 34 warnings. [ 69s] [ 69s] ... creating baselibs [ 69s] qemu: Unsupported syscall: 311 [ 69s] ... saving built statistics [ 69s] ... saving built packages [ 70s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-4.05-1.1.armv7l.rpm [ 70s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debuginfo-4.05-1.1.armv7l.rpm [ 70s] /home/abuild/rpmbuild/RPMS/armv7l/perl-WWW-Curl-debugsource-4.05-1.1.armv7l.rpm [ 70s] /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-1.1.src.rpm [ 70s] /home/abuild/rpmbuild/OTHER/_statistics [ 70s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 70s] [ 70s] w21 finished "build perl-WWW-Curl.spec" at Thu Jul 21 14:39:47 UTC 2016. [ 70s] [ 71s] /.build/build: line 368: 233 Killed background_monitor_process [ 73s] [ 61.295350] SysRq : Power Off [ 73s] [ 61.301879] Power down. [ 73s] build: extracting built packages... [ 73s] perl-WWW-Curl-4.05-1.1.armv7l.rpm [ 73s] perl-WWW-Curl-debuginfo-4.05-1.1.armv7l.rpm [ 73s] perl-WWW-Curl-debugsource-4.05-1.1.armv7l.rpm [ 73s] perl-WWW-Curl-4.05-1.1.src.rpm [ 73s] _statistics [ 73s] rpmlint.log