[ 0s] Using BUILD_ROOT=/srv/build/root_12/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_12/root [ 0s] [ 0s] [ 0s] w14 started "build _service:gbs:gssdp.spec" at Mon Oct 17 15:40:21 UTC 2016. [ 0s] [ 0s] Building gssdp for project 'Tizen:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '70d07b0a91d3e94ebc4b37228d167f40' [ 0s] [ 0s] processing specfile /srv/build/root_12/.build-srcdir/_service:gbs:gssdp.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_12/.build-srcdir/_service:gbs:gssdp.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/12/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_12/.build.rpmlist /srv/build/root_12/.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-armv7l... [ 4s] [25/40] preinstalling qemu-linux-user-cross... [ 5s] [26/40] preinstalling coreutils... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 5s] [35/40] preinstalling tar... [ 5s] [36/40] preinstalling util-linux... [ 5s] [37/40] preinstalling util-linux-su... [ 5s] [38/40] preinstalling nss... [ 5s] [39/40] preinstalling libsoftokn3... [ 5s] [40/40] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 5s] [5/9] preinstalling perl... [ 6s] [6/9] preinstalling grep... [ 6s] [7/9] preinstalling libblkid... [ 6s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 7s] reordering...cycle: gio-branding-upstream -> libgio [ 7s] breaking dependency libgio -> gio-branding-upstream [ 7s] cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] booting kvm ... [ 7s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_12/root,if=virtio,cache=none -drive file=/srv/build/root_12/root,if=ide,index=0,cache=none -drive file=/srv/build/root_12/swap,if=virtio,cache=none -smp 4 [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 20s] Waiting for device /dev/vda to appear: ok [ 20s] fsck from util-linux 2.21.2 [ 20s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 20s] /dev/vda: clean, 5080/2392064 files, 244322/9568256 blocks [ 20s] fsck succeeded. Mounting root device read-write. [ 20s] Mounting root /dev/vda [ 20s] mount -o rw -t ext4 /dev/vda /root [ 20s] replacing /etc/mtab with symlink to /proc/self/mounts [ 36s] 2nd stage started in virtual machine [ 37s] machine type: armv7l [ 39s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 39s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 39s] swapon /dev/vdb [ 40s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 41s] mount: none is already mounted or /proc busy [ 41s] mount: none is already mounted or /dev/pts busy [ 41s] logging output to //.build.log... [ 42s] processing specfile /.build-srcdir/_service:gbs:gssdp.spec ... [ 42s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 48s] running qemu-linux-user-cross postinstall script [ 49s] running qemu-accel-armv7l postinstall script [ 49s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 49s] running setup postinstall script [ 49s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 49s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 49s] initializing rpm db... [ 58s] [1/135] installing libmagic-data-5.28-4.1 [ 59s] [2/135] installing setup-0.9-3.6 [ 59s] [3/135] installing terminfo-base-5.9-1.17 [ 60s] [4/135] installing filesystem-3.1-10.1 [ 61s] [5/135] installing glibc-2.20-12.1 [ 62s] [6/135] installing libatomic-4.9.2-15.1 [ 62s] [7/135] installing libgcc-4.9.2-15.1 [ 62s] [8/135] installing libgomp-4.9.2-15.1 [ 63s] [9/135] installing bash-3.2.57-3.4 [ 63s] [10/135] installing cpio-2.11-2.1 [ 64s] [11/135] installing diffutils-3.3-1.13 [ 65s] [12/135] installing findutils-4.3.8-3.1 [ 65s] [13/135] installing hostname-3.12-1.8 [ 65s] [14/135] installing libattr-2.4.47-1.16 [ 65s] [15/135] installing libbz2-1.0.6-2.7 [ 66s] [16/135] installing libcap-2.24-1.91 [ 67s] [17/135] installing libelf-0.153-5.28 [ 67s] [18/135] installing libelf0-0.8.13-1.14 [ 67s] [19/135] installing libexpat-2.1.1-2.5 [ 67s] [20/135] installing libext2fs-1.42.13-2.8 [ 68s] [21/135] installing libffi-3.1-2.5 [ 68s] [22/135] installing libfreebl3-3.23-4.46 [ 68s] [23/135] installing libgmp-4.2.1-4.5 [ 69s] [24/135] installing libitm-4.9.2-15.1 [ 69s] [25/135] installing libltdl-2.4.2-3.5 [ 69s] [26/135] installing liblua-5.1.4-1.18 [ 69s] [27/135] installing liblzma-5.1.3-3.1 [ 70s] [28/135] installing libnettle-2.7.1-11.2 [ 70s] [29/135] installing libpcre-8.39-3.1 [ 71s] [30/135] installing libpopt-1.16-2.7 [ 72s] [31/135] installing libpython-2.7.8-3.6 [ 73s] [32/135] installing libsmack-1.2.0-4.4 [ 73s] [33/135] installing libsmartcols-2.28-8.1 [ 74s] [34/135] installing libsqlite-3.8.10.2-1.15 [ 74s] [35/135] installing libstdc++-4.9.2-15.1 [ 74s] [36/135] installing libtasn1-4.8-9.5 [ 75s] [37/135] installing libuuid-2.28-8.1 [ 75s] [38/135] installing m4-1.4.17-1.8 [ 75s] [39/135] installing net-tools-2.0_20121208git-1.11 [ 76s] [40/135] installing nspr-4.12-4.16 [ 76s] [41/135] installing patch-2.7-1.10 [ 78s] [42/135] installing pkg-config-0.28-1.13 [ 79s] [43/135] installing sed-4.1c-2.6 [ 79s] [44/135] installing update-alternatives-1.16.3-1.8 [ 79s] [45/135] installing which-2.20-1.8 [ 79s] [46/135] installing zlib-1.2.8-1.17 [ 80s] [47/135] installing libncurses-5.9-1.17 [ 80s] [48/135] installing libncurses6-5.9-1.17 [ 81s] [49/135] installing shadow-utils-4.1.4.2-2.1 [ 81s] [50/135] installing build-compare-2015.04.28-4.10 [ 84s] [51/135] installing libstdc++-devel-4.9.2-15.1 [ 84s] [52/135] installing qemu-linux-user-cross-2.7.0-1.1 [ 88s] [53/135] installing cpp-4.9.2-15.1 [ 89s] [54/135] installing gcc-c++-4.9.2-15.1 [ 91s] [55/135] installing xz-devel-5.1.3-3.1 [ 93s] [56/135] installing binutils-2.25-6.10 [ 97s] [57/135] installing coreutils-6.9-8.1 [ 98s] [58/135] installing db4-4.8.30.NC-2.1 [ 101s] [59/135] installing gawk-3.1.5-2.11 [ 103s] [60/135] installing grep-2.5.2-2.11 [ 104s] [61/135] installing less-466-1.11 [ 104s] [62/135] installing libacl-2.2.52-3.5 [ 104s] [63/135] installing libasm-0.153-5.28 [ 104s] [64/135] installing libblkid-2.28-8.1 [ 106s] [65/135] installing libcap-tools-2.24-1.91 [ 106s] [66/135] installing libglib-2.44.1-20.2 [ 107s] [67/135] installing libopenssl-1.0.2j-10.1 [ 110s] [68/135] installing libpcreposix-8.39-3.1 [ 110s] [69/135] installing libreadline-5.2-2.6 [ 110s] [70/135] installing libubsan-4.9.2-15.1 [ 111s] [71/135] installing make-4.0-1.10 [ 111s] [72/135] installing nss-certs-3.23-4.46 [ 111s] [73/135] installing smack-1.2.0-4.4 [ 111s] [74/135] installing bzip2-1.0.6-2.7 [ 111s] [75/135] installing libhogweed-2.7.1-11.2 [ 112s] [76/135] installing libmagic-5.28-4.1 [ 112s] [77/135] installing libpcrecpp-8.39-3.1 [ 113s] [78/135] installing libxml2-2.9.4-5.4 [ 113s] [79/135] installing xz-5.1.3-3.1 [ 113s] [80/135] installing libdw-0.153-5.28 [ 113s] [81/135] installing ncurses-devel-5.9-1.17 [ 114s] [82/135] installing linux-glibc-devel-3.10-1.3 [ 114s] [83/135] installing readline-devel-5.2-2.6 [ 115s] [84/135] installing file-5.28-4.1 [ 116s] [85/135] installing glibc-locale-2.20-12.1 [ 118s] [86/135] installing libgmodule-2.44.1-20.2 [ 118s] [87/135] installing libgthread-2.44.1-20.2 [ 118s] [88/135] installing libmount-2.28-8.1 [ 119s] [89/135] installing security-config-1.0-51.2 [ 125s] usermod: user 'buxton' does not exist [ 125s] usermod: user 'dbus' does not exist [ 125s] [90/135] installing tar-1.17-2.8 [ 125s] [91/135] installing gzip-1.3.12-2.14 [ 125s] [92/135] installing libfdisk1-2.28-8.1 [ 125s] [93/135] installing libgobject-2.44.1-20.2 [ 126s] [94/135] installing libxml2-tools-2.9.4-5.4 [ 126s] [95/135] installing pam-1.1.6-4.5 [ 126s] [96/135] installing libdlog-0.5.1-60.2 [ 126s] [97/135] installing perl-5.20.0-3.63 [ 128s] [98/135] installing tzdata-2016f-2.2 [ 128s] [99/135] installing pcre-devel-8.39-3.1 [ 128s] [100/135] installing elfutils-0.153-5.28 [ 128s] [101/135] installing gcc-4.9.2-15.1 [ 129s] [102/135] installing libgnutls-3.3.5-11.2 [ 130s] [103/135] installing shared-mime-info-1.3-1.8 [ 135s] [104/135] installing python-2.7.8-3.6 [ 137s] [105/135] installing build-mkbaselibs-20120927-1.3 [ 137s] [106/135] installing ca-certificates-0.0.3-21.2 [ 137s] [107/135] installing glibc-devel-2.20-12.1 [ 138s] [108/135] installing qemu-accel-armv7l-0.4-9.7 [ 156s] [109/135] installing autoconf-2.69-1.5 [ 156s] [110/135] installing python-xml-2.7.8-3.6 [ 156s] [111/135] installing libsystemd-219-62.2 [ 157s] [112/135] installing util-linux-2.28-8.1 [ 159s] [113/135] installing zlib-devel-1.2.8-1.17 [ 159s] [114/135] installing automake-1.14.1-1.4 [ 160s] [115/135] installing dbus-libs-1.10.6-50.2 [ 160s] [116/135] installing util-linux-su-2.28-8.1 [ 160s] [117/135] installing build-20120927-1.3 [ 161s] [118/135] installing dbus-devel-1.10.6-50.2 [ 161s] [119/135] installing libtool-2.4.2-3.5 [ 162s] [120/135] installing libxml2-devel-2.9.4-5.4 [ 162s] [121/135] installing nss-3.23-4.46 [ 163s] [122/135] installing libgio-2.44.1-20.2 [ 164s] [123/135] installing gio-branding-upstream-2.44.1-20.2 [ 165s] [124/135] installing dbus-glib-0.100.2-8.11 [ 166s] [125/135] installing libsoftokn3-3.23-4.46 [ 167s] [126/135] installing glib2-tools-2.44.1-20.2 [ 168s] [127/135] installing glib-networking-2.38.0-16.5 [ 170s] [128/135] installing rpm-4.11.0.1-9.2 [ 176s] [129/135] installing rpmlint-mini-1.5-3.27 [ 178s] [130/135] installing libsoup-2.46.0-16.2 [ 180s] [131/135] installing glib2-devel-2.44.1-20.2 [ 180s] [132/135] installing rpm-build-4.11.0.1-9.2 [ 181s] [133/135] installing rpmlint-tizen-1.0-1.3 [ 181s] [134/135] installing libsoup-devel-2.46.0-16.2 [ 182s] [135/135] installing dbus-glib-devel-0.100.2-8.11 [ 182s] removing nis flags from //etc/nsswitch.conf... [ 182s] now finalizing build dir... [ 183s] qemu: Unsupported syscall: 311 [ 190s] build target is armv7l-tizen-linux [ 190s] ----------------------------------------------------------------- [ 190s] I have the following modifications for gssdp.spec: [ 190s] 11c11 [ 190s] < Release: 1 [ 190s] --- [ 190s] > Release: 4.2 [ 190s] ----------------------------------------------------------------- [ 190s] ----- building gssdp.spec (user abuild) [ 190s] ----------------------------------------------------------------- [ 190s] ----------------------------------------------------------------- [ 190s] Running qemu build hang workaround... [ 190s] /bin/ps command not found [ 190s] qemu: Unsupported syscall: 311 [ 190s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Mobile/target-TM1/70d07b0a91d3e94ebc4b37228d167f40-gssdp' /home/abuild/rpmbuild/SOURCES/gssdp.spec [ 190s] Building target platforms: armv7l-tizen-linux [ 190s] Building for target armv7l-tizen-linux [ 190s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5unmWr [ 190s] + umask 022 [ 190s] + cd /home/abuild/rpmbuild/BUILD [ 190s] + cd /home/abuild/rpmbuild/BUILD [ 190s] + rm -rf gssdp-0.14.4 [ 190s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gssdp-0.14.4.tar.xz [ 190s] + /bin/tar -xf - [ 190s] + STATUS=0 [ 190s] + '[' 0 -ne 0 ']' [ 190s] + cd gssdp-0.14.4 [ 190s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 190s] + echo 'Patch #0 (2788270-to-9eb6824.diff.gz):' [ 190s] Patch #0 (2788270-to-9eb6824.diff.gz): [ 190s] + /bin/patch -p1 --fuzz=2 [ 190s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/2788270-to-9eb6824.diff.gz [ 190s] patching file INSTALL [ 190s] patching file Makefile.in [ 190s] patching file aclocal.m4 [ 190s] patching file build-aux/depcomp [ 190s] patching file build-aux/missing [ 190s] patching file build-aux/test-driver [ 190s] patching file configure [ 190s] patching file doc/Makefile.in [ 190s] patching file doc/html/GSSDPClient.html [ 190s] patching file doc/html/GSSDPResourceBrowser.html [ 190s] patching file doc/html/GSSDPResourceGroup.html [ 190s] patching file doc/html/annotation-glossary.html [ 190s] patching file doc/html/ch01.html [ 190s] patching file doc/html/gssdp-Error-codes.html [ 190s] patching file doc/html/home.png [ 190s] patching file doc/html/index.html [ 190s] patching file doc/html/left.png [ 190s] patching file doc/html/right.png [ 190s] patching file doc/html/up.png [ 190s] patching file gssdp.manifest [ 190s] patching file gtk-doc.make [ 190s] patching file libgssdp/Makefile.in [ 190s] patching file m4/gtk-doc.m4 [ 190s] patching file m4/libtool.m4 [ 190s] patching file m4/ltoptions.m4 [ 190s] patching file m4/ltsugar.m4 [ 190s] patching file m4/ltversion.m4 [ 190s] patching file m4/lt~obsolete.m4 [ 190s] patching file tests/Makefile.in [ 190s] patching file tests/gtest/Makefile.in [ 190s] patching file tools/Makefile.in [ 190s] patching file vala/Makefile.in [ 190s] + exit 0 [ 190s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.tpDODR [ 190s] + umask 022 [ 190s] + cd /home/abuild/rpmbuild/BUILD [ 190s] + cd gssdp-0.14.4 [ 190s] ++ uname -m [ 190s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 190s] + LANG=C [ 190s] + export LANG [ 190s] + unset DISPLAY [ 190s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 190s] + export CFLAGS [ 190s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 190s] + export CXXFLAGS [ 190s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 190s] + export FFLAGS [ 190s] + LDFLAGS= [ 190s] + export LDFLAGS [ 190s] + LD_AS_NEEDED=1 [ 190s] + export LD_AS_NEEDED [ 190s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 190s] + export CFLAGS [ 190s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 190s] + export CXXFLAGS [ 190s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 190s] + export FFLAGS [ 190s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no [ 191s] checking for a BSD-compatible install... /usr/bin/install -c [ 192s] checking whether build environment is sane... yes [ 192s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 192s] checking for gawk... gawk [ 192s] checking whether make sets $(MAKE)... yes [ 193s] checking how to create a ustar tar archive... gnutar [ 193s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 193s] checking for style of include used by make... GNU [ 193s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 193s] checking whether the C compiler works... yes [ 193s] checking for C compiler default output file name... a.out [ 193s] checking for suffix of executables... [ 193s] checking whether we are cross compiling... no [ 193s] checking for suffix of object files... o [ 193s] checking whether we are using the GNU C compiler... yes [ 193s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 193s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 193s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 193s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 193s] checking what language compliance flags to pass to the C compiler... [ 193s] checking whether make supports nested variables... yes [ 193s] checking for library containing strerror... none required [ 193s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 193s] checking whether we are using the GNU C compiler... (cached) yes [ 193s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 193s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 193s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 193s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 193s] checking for grep that handles long lines and -e... /usr/bin/grep [ 193s] checking for egrep... /usr/bin/grep -E [ 193s] checking for ANSI C header files... yes [ 193s] checking build system type... armv7l-tizen-linux-gnueabi [ 193s] checking host system type... armv7l-tizen-linux-gnueabi [ 193s] checking how to print strings... printf [ 193s] checking for a sed that does not truncate output... /usr/bin/sed [ 193s] checking for fgrep... /usr/bin/grep -F [ 193s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 193s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 194s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 194s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 194s] checking whether ln -s works... yes [ 194s] checking the maximum length of command line arguments... 1572864 [ 194s] checking whether the shell understands some XSI constructs... yes [ 194s] checking whether the shell understands "+="... yes [ 194s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 194s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 194s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 194s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 194s] checking for objdump... objdump [ 194s] checking how to recognize dependent libraries... pass_all [ 194s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 194s] checking for dlltool... no [ 194s] checking how to associate runtime and link libraries... printf %s\n [ 194s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 194s] checking for ar... ar [ 194s] checking for archiver @FILE support... @ [ 194s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 194s] checking for strip... strip [ 194s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 194s] checking for ranlib... ranlib [ 194s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 194s] checking for sysroot... no [ 194s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 194s] checking for mt... no [ 194s] checking if : is a manifest tool... no [ 194s] checking for sys/types.h... yes [ 194s] checking for sys/stat.h... yes [ 194s] checking for stdlib.h... yes [ 194s] checking for string.h... yes [ 194s] checking for memory.h... yes [ 194s] checking for strings.h... yes [ 194s] checking for inttypes.h... yes [ 194s] checking for stdint.h... yes [ 194s] checking for unistd.h... yes [ 194s] checking for dlfcn.h... yes [ 194s] checking for objdir... .libs [ 194s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 194s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 194s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 194s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 194s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 194s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 194s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 194s] checking whether -lc should be explicitly linked in... no [ 194s] checking dynamic linker characteristics... GNU/Linux ld.so [ 194s] checking how to hardcode library paths into programs... immediate [ 194s] checking whether stripping libraries is possible... yes [ 194s] checking if libtool supports shared libraries... yes [ 194s] checking whether to build shared libraries... yes [ 194s] checking whether to build static libraries... yes [ 194s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 194s] checking pkg-config is at least version 0.9.0... yes [ 195s] checking for LIBGSSDP... yes [ 195s] checking for LIBGTK... no [ 195s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 195s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 195s] checking for Win32... no [ 195s] checking for gtkdoc-check... no [ 195s] checking for gtkdoc-rebase... no [ 195s] checking for gtkdoc-mkpdf... no [ 195s] checking whether to build gtk-doc documentation... no [ 195s] configure: creating ./config.status [ 195s] config.status: creating Makefile [ 195s] config.status: creating libgssdp/Makefile [ 195s] config.status: creating tools/Makefile [ 195s] config.status: creating tests/Makefile [ 195s] config.status: creating tests/gtest/Makefile [ 195s] config.status: creating vala/Makefile [ 195s] config.status: creating doc/Makefile [ 196s] config.status: creating doc/version.xml [ 196s] config.status: creating gssdp-1.0.pc [ 196s] config.status: creating gssdp-1.0-uninstalled.pc [ 196s] config.status: creating config.h [ 196s] config.status: executing depfiles commands [ 196s] config.status: executing libtool commands [ 196s] [ 196s] gssdp 0.14.4 [ 196s] --------------------- [ 196s] [ 196s] Prefix: /usr [ 196s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 196s] VALA bindings: no [ 196s] [ 196s] + make -j4 [ 196s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run aclocal-1.11 -I m4 [ 196s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: aclocal-1.11: command not found [ 196s] WARNING: `aclocal-1.11' is missing on your system. You should only need it if [ 196s] you modified `acinclude.m4' or `configure.ac'. You might want [ 196s] to install the `Automake' and `Perl' packages. Grab them from [ 196s] any GNU archive site. [ 196s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoconf [ 196s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run automake-1.11 --gnu [ 196s] /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing: line 52: automake-1.11: command not found [ 196s] WARNING: `automake-1.11' is missing on your system. You should only need it if [ 196s] you modified `Makefile.am', `acinclude.m4' or `configure.ac'. [ 196s] You might want to install the `Automake' and `Perl' packages. [ 196s] Grab them from any GNU archive site. [ 200s] /bin/sh ./config.status --recheck [ 201s] running CONFIG_SHELL=/bin/sh /bin/sh ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no build_alias=armv7l-tizen-linux-gnueabi host_alias=armv7l-tizen-linux-gnueabi CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g LDFLAGS= --no-create --no-recursion [ 201s] checking for a BSD-compatible install... /usr/bin/install -c [ 202s] checking whether build environment is sane... yes [ 202s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 202s] checking for gawk... gawk [ 202s] checking whether make sets $(MAKE)... yes [ 202s] checking how to create a ustar tar archive... gnutar [ 202s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 202s] checking for style of include used by make... GNU [ 202s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 202s] checking whether the C compiler works... yes [ 202s] checking for C compiler default output file name... a.out [ 202s] checking for suffix of executables... [ 202s] checking whether we are cross compiling... no [ 202s] checking for suffix of object files... o [ 202s] checking whether we are using the GNU C compiler... yes [ 202s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 202s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 202s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 202s] checking what warning flags to pass to the C compiler... -Wall -Wmissing-prototypes [ 202s] checking what language compliance flags to pass to the C compiler... [ 202s] checking whether make supports nested variables... yes [ 203s] checking for library containing strerror... none required [ 203s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 203s] checking whether we are using the GNU C compiler... (cached) yes [ 203s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 203s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 203s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 203s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 203s] checking for grep that handles long lines and -e... /usr/bin/grep [ 203s] checking for egrep... /usr/bin/grep -E [ 203s] checking for ANSI C header files... yes [ 203s] checking build system type... armv7l-tizen-linux-gnueabi [ 203s] checking host system type... armv7l-tizen-linux-gnueabi [ 203s] checking how to print strings... printf [ 203s] checking for a sed that does not truncate output... /usr/bin/sed [ 203s] checking for fgrep... /usr/bin/grep -F [ 203s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 203s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 203s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 203s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 203s] checking whether ln -s works... yes [ 203s] checking the maximum length of command line arguments... 1572864 [ 203s] checking whether the shell understands some XSI constructs... yes [ 203s] checking whether the shell understands "+="... yes [ 203s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 203s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 203s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 203s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 203s] checking for objdump... objdump [ 203s] checking how to recognize dependent libraries... pass_all [ 203s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 203s] checking for dlltool... no [ 203s] checking how to associate runtime and link libraries... printf %s\n [ 203s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 203s] checking for ar... ar [ 203s] checking for archiver @FILE support... @ [ 203s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 203s] checking for strip... strip [ 203s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 203s] checking for ranlib... ranlib [ 203s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 203s] checking for sysroot... no [ 203s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 203s] checking for mt... no [ 203s] checking if : is a manifest tool... no [ 203s] checking for sys/types.h... yes [ 203s] checking for sys/stat.h... yes [ 203s] checking for stdlib.h... yes [ 203s] checking for string.h... yes [ 203s] checking for memory.h... yes [ 203s] checking for strings.h... yes [ 203s] checking for inttypes.h... yes [ 203s] checking for stdint.h... yes [ 203s] checking for unistd.h... yes [ 203s] checking for dlfcn.h... yes [ 203s] checking for objdir... .libs [ 203s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 203s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 203s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 203s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 203s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 203s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 203s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 204s] checking whether -lc should be explicitly linked in... no [ 204s] checking dynamic linker characteristics... GNU/Linux ld.so [ 204s] checking how to hardcode library paths into programs... immediate [ 204s] checking whether stripping libraries is possible... yes [ 204s] checking if libtool supports shared libraries... yes [ 204s] checking whether to build shared libraries... yes [ 204s] checking whether to build static libraries... yes [ 204s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 204s] checking pkg-config is at least version 0.9.0... yes [ 204s] checking for LIBGSSDP... yes [ 204s] checking for LIBGTK... no [ 204s] configure: WARNING: gtk+ 3.0 or greater not found, some tools will not build. [ 204s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 204s] checking for Win32... no [ 204s] checking for gtkdoc-check... no [ 204s] checking for gtkdoc-rebase... no [ 204s] checking for gtkdoc-mkpdf... no [ 204s] checking whether to build gtk-doc documentation... no [ 204s] configure: creating ./config.status [ 204s] [ 204s] gssdp 0.14.4 [ 204s] --------------------- [ 204s] [ 204s] Prefix: /usr [ 204s] GObject-Introspection: no (disabled, use --enable-introspection to enable) [ 204s] VALA bindings: no [ 204s] [ 204s] /bin/sh ./config.status [ 205s] config.status: creating Makefile [ 205s] config.status: creating libgssdp/Makefile [ 205s] config.status: creating tools/Makefile [ 205s] config.status: creating tests/Makefile [ 205s] config.status: creating tests/gtest/Makefile [ 205s] config.status: creating vala/Makefile [ 205s] config.status: creating doc/Makefile [ 205s] config.status: creating doc/version.xml [ 205s] config.status: creating gssdp-1.0.pc [ 205s] config.status: creating gssdp-1.0-uninstalled.pc [ 205s] config.status: creating config.h [ 205s] config.status: config.h is unchanged [ 205s] config.status: executing depfiles commands [ 205s] config.status: executing libtool commands [ 205s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4/build-aux/missing --run autoheader) [ 207s] rm -f stamp-h1 [ 207s] touch config.h.in [ 207s] cd . && /bin/sh ./config.status config.h [ 207s] config.status: creating config.h [ 207s] config.status: config.h is unchanged [ 207s] make all-recursive [ 207s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 207s] Making all in libgssdp [ 207s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 207s] make all-am [ 207s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 207s] CC gssdp-client.lo [ 207s] CC gssdp-error.lo [ 207s] CC gssdp-resource-browser.lo [ 207s] CC gssdp-resource-group.lo [ 208s] CC gssdp-socket-source.lo [ 208s] CC gssdp-socket-functions.lo [ 208s] CC gssdp-marshal.lo [ 208s] CCLD libgssdp-1.0.la [ 209s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] Making all in tests [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] Making all in gtest [ 209s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 209s] CC test-util.o [ 209s] AR libtestutil.a [ 209s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 209s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] CC test-publish.o [ 209s] CC test-browser.o [ 209s] CCLD test-publish [ 209s] CCLD test-browser [ 209s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] Making all in doc [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 209s] make[2]: Nothing to be done for 'all'. [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 209s] Making all in vala [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 209s] make[2]: Nothing to be done for 'all'. [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 209s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 209s] + exit 0 [ 209s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.MVSA11 [ 209s] + umask 022 [ 209s] + cd /home/abuild/rpmbuild/BUILD [ 209s] + cd gssdp-0.14.4 [ 209s] + LANG=C [ 209s] + export LANG [ 209s] + unset DISPLAY [ 209s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm [ 209s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm [ 209s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm [ 209s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm install [ 209s] Making install in libgssdp [ 209s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] /bin/make install-am [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib' [ 209s] /bin/sh ../libtool --mode=install /usr/bin/install -c libgssdp-1.0.la '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib' [ 209s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.so.3.0.0 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/libgssdp-1.0.so.3.0.0 [ 209s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3 || { rm -f libgssdp-1.0.so.3 && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so.3; }; }) [ 209s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib && { ln -s -f libgssdp-1.0.so.3.0.0 libgssdp-1.0.so || { rm -f libgssdp-1.0.so && ln -s libgssdp-1.0.so.3.0.0 libgssdp-1.0.so; }; }) [ 209s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.lai /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/libgssdp-1.0.la [ 209s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.a /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/libgssdp-1.0.a [ 209s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/libgssdp-1.0.a [ 209s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/libgssdp-1.0.a [ 209s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 209s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/include/gssdp-1.0/libgssdp' [ 209s] /usr/bin/install -c -m 644 gssdp-client.h gssdp-error.h gssdp-resource-browser.h gssdp-resource-group.h gssdp.h '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/include/gssdp-1.0/libgssdp' [ 209s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/libgssdp' [ 209s] Making install in tests [ 209s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] Making install in gtest [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 209s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 209s] make[3]: Nothing to be done for 'install-exec-am'. [ 209s] make[3]: Nothing to be done for 'install-data-am'. [ 209s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests/gtest' [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] make[3]: Nothing to be done for 'install-exec-am'. [ 209s] make[3]: Nothing to be done for 'install-data-am'. [ 209s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/tests' [ 209s] Making install in doc [ 209s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 209s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 209s] make[2]: Nothing to be done for 'install-exec-am'. [ 209s] /usr/bin/install -c -m 644 ./html/GSSDPClient.html [ 209s] /usr/bin/install -c -m 644 ./html/GSSDPResourceBrowser.html [ 209s] /usr/bin/install -c -m 644 ./html/GSSDPResourceGroup.html [ 209s] /usr/bin/install -c -m 644 ./html/annotation-glossary.html [ 209s] /usr/bin/install -c -m 644 ./html/ch01.html [ 209s] /usr/bin/install -c -m 644 ./html/gssdp-Error-codes.html [ 209s] /usr/bin/install -c -m 644 ./html/gssdp.devhelp2 [ 209s] /usr/bin/install -c -m 644 ./html/home.png [ 209s] /usr/bin/install -c -m 644 ./html/index.html [ 209s] /usr/bin/install -c -m 644 ./html/index.sgml [ 209s] /usr/bin/install -c -m 644 ./html/left.png [ 209s] /usr/bin/install -c -m 644 ./html/right.png [ 209s] /usr/bin/install -c -m 644 ./html/style.css [ 209s] /usr/bin/install -c -m 644 ./html/up.png [ 210s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 210s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/doc' [ 210s] Making install in vala [ 210s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 210s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 210s] make[2]: Nothing to be done for 'install-exec-am'. [ 210s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 210s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4/vala' [ 210s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 210s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 210s] make[2]: Nothing to be done for 'install-exec-am'. [ 210s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/pkgconfig' [ 210s] /usr/bin/install -c -m 644 gssdp-1.0.pc '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/pkgconfig' [ 210s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 210s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gssdp-0.14.4' [ 210s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/share/info/dir [ 210s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm -regex '.*\.la$' [ 210s] + xargs rm -f -- [ 210s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm -regex '.*\.a$' [ 210s] + xargs rm -f -- [ 210s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/share/gtk-doc [ 210s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/share/license [ 210s] + cp COPYING /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/share/license/gssdp [ 210s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/gssdp-0.14.4 [ 210s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm/usr/lib/libgssdp-1.0.so.3.0.0 [ 210s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 210s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 210s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 210s] 341 blocks [ 210s] + /usr/lib/rpm/check-buildroot [ 210s] + /usr/lib/rpm//brp-compress [ 210s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 210s] + /usr/lib/rpm/brp-python-hardlink [ 210s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm [ 210s] Processing files: gssdp-0.14.4-4.2.armv7l [ 210s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 210s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 210s] [ 210s] Provides: gssdp = 0.14.4-4.2 gssdp(armv7l-32) = 0.14.4-4.2 libgssdp-1.0.so.3 [ 210s] Requires(interp): /bin/sh /bin/sh [ 210s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 210s] Requires(post): /bin/sh [ 210s] Requires(postun): /bin/sh [ 210s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libgssdp-1.0.so.3 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsoup-2.4.so.1 rtld(GNU_HASH) [ 210s] Processing files: gssdp-debugsource-0.14.4-4.2.armv7l [ 210s] Provides: gssdp-debugsource = 0.14.4-4.2 gssdp-debugsource(armv7l-32) = 0.14.4-4.2 [ 210s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 210s] Processing files: gssdp-devel-0.14.4-4.2.armv7l [ 210s] Provides: gssdp-devel = 0.14.4-4.2 gssdp-devel(armv7l-32) = 0.14.4-4.2 pkgconfig(gssdp-1.0) = 0.14.4 [ 210s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 210s] Requires: /usr/bin/pkg-config libgssdp-1.0.so.3 pkgconfig(gio-2.0) pkgconfig(gobject-2.0) [ 210s] Processing files: gssdp-debuginfo-0.14.4-4.2.armv7l [ 210s] Provides: gssdp-debuginfo = 0.14.4-4.2 gssdp-debuginfo(armv7l-32) = 0.14.4-4.2 [ 210s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 210s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm [ 211s] warning: Could not canonicalize hostname: w14 [ 211s] Wrote: /home/abuild/rpmbuild/SRPMS/gssdp-0.14.4-4.2.src.rpm [ 211s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-0.14.4-4.2.armv7l.rpm [ 211s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debugsource-0.14.4-4.2.armv7l.rpm [ 211s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-devel-0.14.4-4.2.armv7l.rpm [ 211s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debuginfo-0.14.4-4.2.armv7l.rpm [ 211s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.FDBq7s [ 211s] + umask 022 [ 211s] + cd /home/abuild/rpmbuild/BUILD [ 211s] + cd gssdp-0.14.4 [ 211s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm [ 211s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.14.4-4.2.arm [ 211s] + exit 0 [ 211s] ... checking for files with abuild user/group [ 211s] [ 212s] RPMLINT report: [ 212s] =============== [ 212s] qemu: Unsupported syscall: 311 [ 212s] gssdp.armv7l: W: postun-without-ldconfig /usr/lib/libgssdp-1.0.so.3.0.0 [ 212s] This package contains a library and its %postun doesn't call ldconfig. [ 212s] [ 212s] gssdp.armv7l: W: postin-without-ldconfig /usr/lib/libgssdp-1.0.so.3.0.0 [ 212s] This package contains a library and its %post scriptlet doesn't call ldconfig. [ 212s] [ 212s] gssdp.armv7l: W: name-repeated-in-summary C GSSDP [ 212s] gssdp.src: W: name-repeated-in-summary C GSSDP [ 212s] The name of the package is repeated in its summary. This is often redundant [ 212s] information and looks silly in various programs' output. Make the summary [ 212s] brief and to the point without including redundant information in it. [ 212s] [ 212s] gssdp.src:81: W: macro-in-comment %{_libdir} [ 212s] There is a unescaped macro after a shell style comment in the specfile. Macros [ 212s] are expanded everywhere, so check if it can cause a problem in this case and [ 212s] escape the macro with another leading % if appropriate. [ 212s] [ 212s] gssdp.armv7l: W: explicit-lib-dependency libsoup [ 212s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 212s] explicit Requires: tags. [ 212s] [ 212s] gssdp.armv7l: W: empty-%postun [ 212s] gssdp.armv7l: W: empty-%post [ 212s] gssdp-devel.armv7l: W: description-shorter-than-summary [ 212s] The package description should be longer than the summary. be a bit more [ 212s] verbose, please. [ 212s] [ 212s] 3 packages and 0 specfiles checked; 0 errors, 9 warnings. [ 212s] [ 212s] ... creating baselibs [ 212s] qemu: Unsupported syscall: 311 [ 213s] ... saving built statistics [ 213s] ... saving built packages [ 214s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-0.14.4-4.2.armv7l.rpm [ 214s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debuginfo-0.14.4-4.2.armv7l.rpm [ 214s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debugsource-0.14.4-4.2.armv7l.rpm [ 214s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-devel-0.14.4-4.2.armv7l.rpm [ 214s] /home/abuild/rpmbuild/SRPMS/gssdp-0.14.4-4.2.src.rpm [ 214s] /home/abuild/rpmbuild/OTHER/_statistics [ 214s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 214s] [ 214s] w14 finished "build gssdp.spec" at Mon Oct 17 15:43:54 UTC 2016. [ 214s] [ 218s] [ 208.284817] SysRq : Power Off [ 218s] [ 208.596310] Power down. [ 218s] build: extracting built packages... [ 218s] gssdp-0.14.4-4.2.armv7l.rpm [ 218s] gssdp-debuginfo-0.14.4-4.2.armv7l.rpm [ 218s] gssdp-debugsource-0.14.4-4.2.armv7l.rpm [ 218s] gssdp-devel-0.14.4-4.2.armv7l.rpm [ 218s] gssdp-0.14.4-4.2.src.rpm [ 218s] _statistics [ 218s] rpmlint.log Retried build at Tue Oct 18 02:51:31 2016 returned same result, skipped Retried build at Wed Oct 19 08:03:45 2016 returned same result, skipped