[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w15 started "build _service:gbs:dos2unix.spec" at Sun Aug 28 04:40:40 UTC 2016. [ 0s] [ 0s] Building dos2unix for project 'Tizen:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '5fcf86e069082e80806dd8c4392dab3b' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:dos2unix.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:dos2unix.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/39] preinstalling libmagic-data... [ 1s] [2/39] preinstalling setup... [ 1s] [3/39] preinstalling filesystem... [ 1s] [4/39] preinstalling glibc... [ 1s] [5/39] preinstalling libgcc... [ 1s] [6/39] preinstalling bash... [ 1s] [7/39] preinstalling diffutils... [ 1s] [8/39] preinstalling grep... [ 1s] [9/39] preinstalling libattr... [ 1s] [10/39] preinstalling libbz2... [ 1s] [11/39] preinstalling libcap... [ 1s] [12/39] preinstalling libelf... [ 1s] [13/39] preinstalling libfreebl3... [ 1s] [14/39] preinstalling liblua... [ 1s] [15/39] preinstalling liblzma... [ 1s] [16/39] preinstalling libncurses... [ 1s] [17/39] preinstalling libpopt... [ 1s] [18/39] preinstalling libsmack... [ 1s] [19/39] preinstalling libsqlite... [ 1s] [20/39] preinstalling libuuid... [ 1s] [21/39] preinstalling nspr... [ 1s] [22/39] preinstalling sed... [ 1s] [23/39] preinstalling zlib... [ 1s] [24/39] preinstalling qemu-accel-armv7l... [ 4s] [25/39] preinstalling qemu-linux-user-cross... [ 5s] [26/39] preinstalling coreutils... [ 5s] [27/39] preinstalling libacl... [ 5s] [28/39] preinstalling libblkid... [ 5s] [29/39] preinstalling libreadline... [ 5s] [30/39] preinstalling smack... [ 5s] [31/39] preinstalling bzip2... [ 5s] [32/39] preinstalling libmagic... [ 5s] [33/39] preinstalling libxml2... [ 5s] [34/39] preinstalling libmount... [ 5s] [35/39] preinstalling tar... [ 5s] [36/39] preinstalling util-linux... [ 5s] [37/39] preinstalling nss... [ 5s] [38/39] preinstalling libsoftokn3... [ 5s] [39/39] preinstalling rpm... [ 5s] [ 5s] [1/9] preinstalling libext2fs... [ 5s] [2/9] preinstalling libpcre... [ 5s] [3/9] preinstalling libsmartcols... [ 5s] [4/9] preinstalling libuuid... [ 6s] [5/9] preinstalling perl... [ 6s] [6/9] preinstalling grep... [ 6s] [7/9] preinstalling libblkid... [ 6s] [8/9] preinstalling libmount... [ 6s] [9/9] preinstalling util-linux... [ 6s] copying packages... [ 7s] reordering...cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 10s] booting kvm ... [ 10s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 10000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 16s] Waiting for device /dev/vda to appear: ok [ 16s] fsck from util-linux 2.21.2 [ 16s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 16s] /dev/vda: clean, 4993/2392064 files, 236720/9568256 blocks [ 16s] fsck succeeded. Mounting root device read-write. [ 16s] Mounting root /dev/vda [ 16s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 20s] 2nd stage started in virtual machine [ 20s] machine type: armv7l [ 21s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 21s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 21s] swapon /dev/vdb [ 22s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 22s] mount: none is already mounted or /proc busy [ 22s] mount: none is already mounted or /dev/pts busy [ 22s] logging output to //.build.log... [ 23s] processing specfile /.build-srcdir/_service:gbs:dos2unix.spec ... [ 23s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 34s] running qemu-linux-user-cross postinstall script [ 35s] running qemu-accel-armv7l postinstall script [ 35s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 35s] running setup postinstall script [ 35s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 35s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 35s] initializing rpm db... [ 45s] [1/92] installing libmagic-data-5.18-3.3 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [2/92] installing setup-0.9-3.1 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [3/92] installing terminfo-base-5.9-1.17 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [4/92] installing filesystem-3.1-8.1 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [5/92] installing glibc-2.20-10.1 [ 50s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 50s] [6/92] installing libatomic-4.9.2-12.3 [ 50s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 50s] [7/92] installing libgcc-4.9.2-12.3 [ 50s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 50s] [8/92] installing libgomp-4.9.2-12.3 [ 50s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 50s] [9/92] installing bash-3.2.57-3.4 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [10/92] installing cpio-2.11-1.12 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [11/92] installing diffutils-3.3-1.13 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [12/92] installing findutils-4.3.8-2.13 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [13/92] installing hostname-3.12-1.8 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [14/92] installing libattr-2.4.47-1.16 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [15/92] installing libbz2-1.0.6-1.92 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [16/92] installing libcap-2.24-1.87 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [17/92] installing libelf-0.153-5.19 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [18/92] installing libext2fs-1.42.13-2.6 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [19/92] installing libfreebl3-3.23-4.36 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [20/92] installing libitm-4.9.2-12.3 [ 54s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [21/92] installing libltdl-2.4.2-3.5 [ 54s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [22/92] installing liblua-5.1.4-1.18 [ 54s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [23/92] installing liblzma-5.1.3-2.8 [ 55s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [24/92] installing libpcre-8.39-2.3 [ 55s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [25/92] installing libpopt-1.16-2.7 [ 55s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [26/92] installing libsmack-1.2.0-4.4 [ 55s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [27/92] installing libsmartcols-2.28-6.20 [ 56s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [28/92] installing libsqlite-3.8.10.2-1.15 [ 56s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [29/92] installing libstdc++-4.9.2-12.3 [ 57s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 57s] [30/92] installing libuuid-2.28-6.20 [ 57s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 57s] [31/92] installing m4-1.4.17-1.8 [ 57s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 57s] [32/92] installing net-tools-2.0_20121208git-1.11 [ 57s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 57s] [33/92] installing nspr-4.12-4.11 [ 57s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 57s] [34/92] installing patch-2.7-1.10 [ 58s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 58s] [35/92] installing pkg-config-0.28-1.13 [ 58s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 58s] [36/92] installing sed-4.1c-2.6 [ 58s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 58s] [37/92] installing update-alternatives-1.16.3-1.8 [ 58s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [38/92] installing which-2.20-1.8 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [39/92] installing zlib-1.2.8-1.17 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [40/92] installing libncurses-5.9-1.17 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [41/92] installing build-compare-2015.04.28-3.1 [ 59s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 60s] [42/92] installing libstdc++-devel-4.9.2-12.3 [ 60s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 60s] [43/92] installing qemu-linux-user-cross-2.2.0-1.2.1 [ 62s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 62s] [44/92] installing cpp-4.9.2-12.3 [ 63s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 63s] [45/92] installing gcc-c++-4.9.2-12.3 [ 64s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 64s] [46/92] installing binutils-2.25-6.4 [ 65s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 65s] [47/92] installing coreutils-6.9-7.7 [ 65s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 65s] [48/92] installing db4-4.8.30.NC-1.19 [ 65s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 65s] [49/92] installing gawk-3.1.5-2.11 [ 65s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 66s] [50/92] installing grep-2.5.2-2.11 [ 66s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 66s] [51/92] installing less-466-1.11 [ 66s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 66s] [52/92] installing libacl-2.2.52-3.5 [ 66s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 66s] [53/92] installing libasm-0.153-5.19 [ 66s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 66s] [54/92] installing libblkid-2.28-6.20 [ 66s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 66s] [55/92] installing libreadline-5.2-2.6 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [56/92] installing libubsan-4.9.2-12.3 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [57/92] installing make-4.0-1.10 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [58/92] installing nss-certs-3.23-4.36 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [59/92] installing smack-1.2.0-4.4 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [60/92] installing bzip2-1.0.6-1.92 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [61/92] installing gettext-runtime-0.19.7-2.6 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [62/92] installing libmagic-5.18-3.3 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [63/92] installing libxml2-2.9.4-5.4 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [64/92] installing xz-5.1.3-2.8 [ 68s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [65/92] installing libdw-0.153-5.19 [ 68s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [66/92] installing linux-glibc-devel-3.10-1.3 [ 68s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [67/92] installing file-5.18-3.3 [ 68s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [68/92] installing glibc-locale-2.20-10.1 [ 69s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [69/92] installing libmount-2.28-6.20 [ 69s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [70/92] installing tar-1.17-2.8 [ 69s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [71/92] installing gettext-tools-0.19.7-2.6 [ 69s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [72/92] installing gzip-1.3.12-2.14 [ 69s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [73/92] installing libfdisk1-2.28-6.20 [ 70s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 70s] [74/92] installing pam-1.1.6-4.5 [ 70s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 70s] [75/92] installing perl-5.20.0-3.54 [ 72s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 72s] [76/92] installing tzdata-2016f-2.2 [ 73s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 73s] [77/92] installing elfutils-0.153-5.19 [ 73s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 73s] [78/92] installing gcc-4.9.2-12.3 [ 75s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 75s] [79/92] installing build-mkbaselibs-20120927-1.3 [ 75s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 75s] [80/92] installing glibc-devel-2.20-10.1 [ 75s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 76s] [81/92] installing qemu-accel-armv7l-0.4-8.3 [ 86s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 87s] [82/92] installing autoconf-2.69-1.5 [ 87s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 87s] [83/92] installing util-linux-2.28-6.20 [ 87s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 88s] [84/92] installing automake-1.14.1-1.4 [ 88s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 88s] [85/92] installing build-20120927-1.3 [ 88s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 88s] [86/92] installing libtool-2.4.2-3.5 [ 89s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 89s] [87/92] installing nss-3.23-4.36 [ 89s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 89s] [88/92] installing libsoftokn3-3.23-4.36 [ 89s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 90s] [89/92] installing rpm-4.11.0.1-7.6 [ 90s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 90s] [90/92] installing rpmlint-mini-1.5-3.21 [ 93s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 94s] [91/92] installing rpm-build-4.11.0.1-7.6 [ 94s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 95s] [92/92] installing rpmlint-tizen-1.0-1.3 [ 95s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 95s] removing nis flags from //etc/nsswitch.conf... [ 95s] now finalizing build dir... [ 95s] qemu: Unsupported syscall: 311 [ 103s] build target is armv7l-tizen-linux [ 103s] ----------------------------------------------------------------- [ 103s] I have the following modifications for dos2unix.spec: [ 103s] 4c4 [ 103s] < Release: 0 [ 103s] --- [ 103s] > Release: 7.49 [ 103s] ----------------------------------------------------------------- [ 103s] ----- building dos2unix.spec (user abuild) [ 103s] ----------------------------------------------------------------- [ 103s] ----------------------------------------------------------------- [ 103s] qemu: Unsupported syscall: 311 [ 103s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Mobile/target-TM1/5fcf86e069082e80806dd8c4392dab3b-dos2unix' /home/abuild/rpmbuild/SOURCES/dos2unix.spec [ 103s] Building target platforms: armv7l-tizen-linux [ 103s] Building for target armv7l-tizen-linux [ 103s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oSfsCw [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + rm -rf dos2unix-6.0 [ 103s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dos2unix-6.0.tar.gz [ 103s] + /bin/tar -xf - [ 103s] + STATUS=0 [ 103s] + '[' 0 -ne 0 ']' [ 103s] + cd dos2unix-6.0 [ 103s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 103s] + cp /home/abuild/rpmbuild/SOURCES/dos2unix.manifest . [ 103s] + find . -type f [ 103s] + xargs chmod -x [ 103s] + exit 0 [ 103s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.mVbV4h [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd dos2unix-6.0 [ 103s] ++ uname -m [ 103s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 103s] + LANG=C [ 103s] + export LANG [ 103s] + unset DISPLAY [ 103s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 103s] + export CFLAGS [ 103s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 103s] + export CXXFLAGS [ 103s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 103s] + export FFLAGS [ 103s] + LDFLAGS= [ 103s] + export LDFLAGS [ 103s] + LD_AS_NEEDED=1 [ 103s] + export LD_AS_NEEDED [ 103s] + export RPM_OPT_FLAGS [ 103s] + make -j4 CC=gcc HTMLEXT=html [ 103s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c dos2unix.c -o dos2unix.o [ 103s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c querycp.c -o querycp.o [ 103s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c common.c -o common.o [ 103s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -c unix2dos.c -o unix2dos.o [ 103s] LC_CTYPE=C pod2text man/man1/dos2unix.pod > dos2unix.txt [ 103s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.html [ 104s] msgfmt -c po/de.po -o po/de.mo [ 104s] msgfmt -c po/es.po -o po/es.mo [ 104s] po/es.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 104s] and iconv() does not support "ISO-8859-1". [ 104s] Installing GNU libiconv and then reinstalling GNU gettext [ 104s] would fix this problem. [ 104s] Continuing anyway. [ 104s] po/es.po:8: warning: header field 'Language' still has the initial default value [ 104s] msgfmt -c po/eo.po -o po/eo.mo [ 104s] msgfmt -c po/nl.po -o po/nl.mo [ 104s] po/nl.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 104s] and iconv() does not support "ISO-8859-1". [ 104s] Installing GNU libiconv and then reinstalling GNU gettext [ 104s] would fix this problem. [ 104s] Continuing anyway. [ 104s] make -C man/man1 [ 104s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 104s] # make target - create manual page from a *.pod page [ 104s] podchecker dos2unix.pod [ 104s] # make target - create manual page from a *.pod page [ 104s] podchecker ../nl/man1/dos2unix.pod [ 104s] make -C man/man1 [ 104s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 104s] # make target - create manual page from a *.pod page [ 104s] podchecker dos2unix.pod [ 104s] make -C man/man1 [ 104s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 104s] # make target - create manual page from a *.pod page [ 104s] podchecker dos2unix.pod [ 104s] dos2unix.pod pod syntax OK. [ 104s] LC_CTYPE=C pod2man \ [ 104s] --center="$(date "+%Y-%m-%d")" \ [ 104s] --name="dos2unix" \ [ 104s] --section="1" \ [ 104s] dos2unix.pod \ [ 104s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 104s] > dos2unix.1 && \ [ 104s] rm -f pod*.tmp [ 104s] ../nl/man1/dos2unix.pod pod syntax OK. [ 104s] LC_CTYPE=C pod2man \ [ 104s] --center="$(date "+%Y-%m-%d")" \ [ 104s] --name="dos2unix" \ [ 104s] --section="1" \ [ 104s] ../nl/man1/dos2unix.pod \ [ 104s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 104s] > ../nl/man1/dos2unix.1 && \ [ 104s] rm -f pod*.tmp [ 105s] dos2unix.pod pod syntax OK. [ 105s] LC_CTYPE=C pod2man \ [ 105s] --center="$(date "+%Y-%m-%d")" \ [ 105s] --name="dos2unix" \ [ 105s] --section="1" \ [ 105s] dos2unix.pod \ [ 105s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 105s] > dos2unix.1 && \ [ 105s] rm -f pod*.tmp [ 105s] dos2unix.pod pod syntax OK. [ 105s] LC_CTYPE=C pod2man \ [ 105s] --center="$(date "+%Y-%m-%d")" \ [ 105s] --name="dos2unix" \ [ 105s] --section="1" \ [ 105s] dos2unix.pod \ [ 105s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 105s] > dos2unix.1 && \ [ 105s] rm -f pod*.tmp [ 105s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming ISO8859-1 [ 106s] perl -pli.bak \ [ 106s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 106s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 106s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 106s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 106s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 106s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 106s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 106s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 106s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 106s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 106s] dos2unix.1 [ 106s] POD document had syntax errors at /bin/pod2man line 71. [ 106s] perl -pli.bak \ [ 106s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 106s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 106s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 106s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 106s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 106s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 106s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 106s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 106s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 106s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 106s] ../nl/man1/dos2unix.1 [ 106s] # make target - create manual page from a *.pod page [ 106s] podchecker ../nl/man1/dos2unix.pod [ 106s] # make target - create manual page from a *.pod page [ 106s] podchecker ../es/man1/dos2unix.pod [ 106s] perl -pli.bak \ [ 106s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 106s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 106s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 106s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 106s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 106s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 106s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 106s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 106s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 106s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 106s] dos2unix.1 [ 106s] # make target - create manual page from a *.pod page [ 106s] podchecker ../nl/man1/dos2unix.pod [ 106s] perl -pli.bak \ [ 106s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 106s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 106s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 106s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 106s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 106s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 106s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 106s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 106s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 106s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 106s] dos2unix.1 [ 106s] ../nl/man1/dos2unix.pod pod syntax OK. [ 106s] LC_CTYPE=C pod2man \ [ 106s] --center="$(date "+%Y-%m-%d")" \ [ 106s] --name="dos2unix" \ [ 106s] --section="1" \ [ 106s] ../nl/man1/dos2unix.pod \ [ 106s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 106s] > ../nl/man1/dos2unix.1 && \ [ 106s] rm -f pod*.tmp [ 107s] ../es/man1/dos2unix.pod pod syntax OK. [ 107s] LC_CTYPE=C pod2man \ [ 107s] --center="$(date "+%Y-%m-%d")" \ [ 107s] --name="dos2unix" \ [ 107s] --section="1" \ [ 107s] ../es/man1/dos2unix.pod \ [ 107s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 107s] > ../es/man1/dos2unix.1 && \ [ 107s] rm -f pod*.tmp [ 107s] # make target - create manual page from a *.pod page [ 107s] podchecker ../es/man1/dos2unix.pod [ 107s] ../nl/man1/dos2unix.pod pod syntax OK. [ 107s] LC_CTYPE=C pod2man \ [ 107s] --center="$(date "+%Y-%m-%d")" \ [ 107s] --name="dos2unix" \ [ 107s] --section="1" \ [ 107s] ../nl/man1/dos2unix.pod \ [ 107s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 107s] > ../nl/man1/dos2unix.1 && \ [ 107s] rm -f pod*.tmp [ 107s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming ISO8859-1 [ 107s] ../es/man1/dos2unix.pod pod syntax OK. [ 107s] LC_CTYPE=C pod2man \ [ 107s] --center="$(date "+%Y-%m-%d")" \ [ 107s] --name="dos2unix" \ [ 107s] --section="1" \ [ 107s] ../es/man1/dos2unix.pod \ [ 107s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 107s] > ../es/man1/dos2unix.1 && \ [ 107s] rm -f pod*.tmp [ 107s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming ISO8859-1 [ 108s] POD document had syntax errors at /bin/pod2man line 71. [ 108s] perl -pli.bak \ [ 108s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 108s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 108s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 108s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 108s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 108s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 108s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 108s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 108s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 108s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 108s] ../nl/man1/dos2unix.1 [ 108s] # make target - create manual page from a *.pod page [ 108s] podchecker ../es/man1/dos2unix.pod [ 108s] POD document had syntax errors at /bin/pod2man line 71. [ 108s] perl -pli.bak \ [ 108s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 108s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 108s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 108s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 108s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 108s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 108s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 108s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 108s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 108s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 108s] ../es/man1/dos2unix.1 [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 108s] gcc dos2unix.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -o dos2unix [ 108s] gcc unix2dos.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -o unix2dos [ 108s] ln -sf dos2unix mac2unix [ 108s] ln -sf unix2dos unix2mac [ 108s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming ISO8859-1 [ 108s] POD document had syntax errors at /bin/pod2man line 71. [ 108s] perl -pli.bak \ [ 108s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 108s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 108s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 108s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 108s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 108s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 108s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 108s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 108s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 108s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 108s] ../nl/man1/dos2unix.1 [ 108s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming ISO8859-1 [ 108s] ../es/man1/dos2unix.pod pod syntax OK. [ 108s] LC_CTYPE=C pod2man \ [ 108s] --center="$(date "+%Y-%m-%d")" \ [ 108s] --name="dos2unix" \ [ 108s] --section="1" \ [ 108s] ../es/man1/dos2unix.pod \ [ 108s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 108s] > ../es/man1/dos2unix.1 && \ [ 108s] rm -f pod*.tmp [ 109s] POD document had syntax errors at /bin/pod2man line 71. [ 109s] perl -pli.bak \ [ 109s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 109s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 109s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 109s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 109s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 109s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 109s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 109s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 109s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 109s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 109s] ../es/man1/dos2unix.1 [ 109s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 109s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming ISO8859-1 [ 110s] POD document had syntax errors at /bin/pod2man line 71. [ 110s] perl -pli.bak \ [ 110s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 110s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 110s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 110s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 110s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 110s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 110s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 110s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 110s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 110s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 110s] ../es/man1/dos2unix.1 [ 110s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 110s] + exit 0 [ 110s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.YwY3wk [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd dos2unix-6.0 [ 110s] + LANG=C [ 110s] + export LANG [ 110s] + unset DISPLAY [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm [ 110s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm [ 110s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm install [ 110s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.htm [ 111s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/bin [ 111s] install -m 755 dos2unix /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/bin [ 111s] install -m 755 unix2dos /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/bin [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/bin; ln -sf dos2unix mac2unix [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/bin; ln -sf unix2dos unix2mac [ 111s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/man1 [ 111s] install -m 644 man/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/man1 [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/man1; ln -sf dos2unix.1 mac2unix.1 [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/man1; ln -sf dos2unix.1 unix2dos.1 [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/man1; ln -sf dos2unix.1 unix2mac.1 [ 111s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/nl/man1/ ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/es/man1/ ; [ 111s] install -m 644 man/nl/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/nl/man1/ ; install -m 644 man/es/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/es/man1/ ; [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; [ 111s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; [ 111s] -- install-mo [ 111s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/de/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/es/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/eo/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/nl/LC_MESSAGES ; [ 111s] install -m 644 po/de.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/de/LC_MESSAGES/dos2unix.mo ; install -m 644 po/es.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/es/LC_MESSAGES/dos2unix.mo ; install -m 644 po/eo.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/eo/LC_MESSAGES/dos2unix.mo ; install -m 644 po/nl.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/locale/nl/LC_MESSAGES/dos2unix.mo ; [ 111s] -- install-doc [ 111s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/doc/dos2unix-6.0 [ 111s] install -m 644 README.txt NEWS.txt ChangeLog.txt COPYING.txt TODO.txt BUGS.txt dos2unix.txt dos2unix.htm /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/doc/dos2unix-6.0 [ 111s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/info/dir [ 111s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm -regex '.*\.la$' [ 111s] + xargs rm -f -- [ 111s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm -regex '.*\.a$' [ 111s] + xargs rm -f -- docdir=/usr/share/doc/packages/dos2unix [ 111s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm dos2unix --all-name --with-man [ 111s] find: `/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/share/help/': No such file or directory [ 111s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dos2unix-6.0 [ 111s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/bin/dos2unix [ 112s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm/usr/bin/unix2dos [ 112s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 112s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 112s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 112s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 112s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 112s] 284 blocks [ 112s] + /usr/lib/rpm/check-buildroot [ 112s] + /usr/lib/rpm//brp-compress [ 112s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 112s] + /usr/lib/rpm/brp-python-hardlink [ 112s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm [ 112s] Processing files: dos2unix-6.0-7.49.armv7l [ 112s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 112s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 112s] [ 112s] Provides: dos2unix = 6.0-7.49 dos2unix(armv7l-32) = 6.0-7.49 unix2dos = 6.0 [ 112s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 112s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 112s] Obsoletes: unix2dos < 6.0 [ 112s] Processing files: dos2unix-debugsource-6.0-7.49.armv7l [ 112s] Provides: dos2unix-debugsource = 6.0-7.49 dos2unix-debugsource(armv7l-32) = 6.0-7.49 [ 112s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 112s] Processing files: dos2unix-debuginfo-6.0-7.49.armv7l [ 112s] warning: File listed twice: /usr/lib/debug/.build-id [ 112s] Provides: dos2unix-debuginfo = 6.0-7.49 dos2unix-debuginfo(armv7l-32) = 6.0-7.49 [ 112s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 112s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm [ 112s] warning: Could not canonicalize hostname: w15 [ 112s] Wrote: /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-7.49.src.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-6.0-7.49.armv7l.rpm [ 113s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debugsource-6.0-7.49.armv7l.rpm [ 113s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debuginfo-6.0-7.49.armv7l.rpm [ 113s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.wpu7d6 [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd dos2unix-6.0 [ 113s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-7.49.arm [ 113s] + exit 0 [ 113s] ... checking for files with abuild user/group [ 113s] [ 113s] RPMLINT report: [ 113s] =============== [ 113s] qemu: Unsupported syscall: 311 [ 114s] dos2unix.armv7l: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 114s] dos2unix.src: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 114s] The value of the Group tag in the package is not valid. Valid groups are [ 114s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 114s] [ 114s] 2 packages and 0 specfiles checked; 2 errors, 0 warnings. [ 114s] [ 114s] ... creating baselibs [ 114s] qemu: Unsupported syscall: 311 [ 114s] ... comparing built packages with the former built [ 114s] /usr/lib/build/pkg-diff.sh [ 114s] compare /.build.oldpackages/dos2unix-6.0-7.48.src.rpm /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-7.49.src.rpm [ 115s] This is not a prerelease project. Compare the project name. [ 115s] comparing rpmtags [ 115s] comparing RELEASE [ 115s] comparing PROVIDES [ 115s] comparing scripts [ 115s] comparing filelist [ 115s] comparing file checksum [ 115s] RPM meta information is identical [ 115s] compare /.build.oldpackages/dos2unix-6.0-7.48.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-6.0-7.49.armv7l.rpm [ 115s] Comparing dos2unix-6.0-7.48.armv7l.rpm to dos2unix-6.0-7.49.armv7l.rpm [ 115s] This is not a prerelease project. Compare the project name. [ 115s] comparing rpmtags [ 115s] comparing RELEASE [ 115s] comparing PROVIDES [ 115s] comparing scripts [ 115s] comparing filelist [ 115s] comparing file checksum [ 115s] creating rename script [ 115s] RPM file checksum differs. [ 116s] Extracting packages [ 116s] /usr/share/man/es/man1/dos2unix.1 differs (troff or preprocessor input, ASCII text) [ 116s] --- old//usr/share/man/es/man1/dos2unix.1 2016-08-28 04:42:35.299220953 +0000 [ 116s] +++ new//usr/share/man/es/man1/dos2unix.1 2016-08-28 04:42:35.303220953 +0000 [ 116s] @@ -1,633 +0,0 @@ [ 116s] -.\" Overly verbose Pod::Man [ 116s] -.\" [ 116s] -.\" Standard preamble: [ 116s] -.\" ======================================================================== [ 116s] -.de Sp \" Vertical space (when we can't use .PP) [ 116s] -.if t .sp .5v [ 116s] -.if n .sp [ 116s] -.. [ 116s] -.de Vb \" Begin verbatim text [ 116s] -.ft CW [ 116s] -.nf [ 116s] -.ne \\$1 [ 116s] -.. [ 116s] -.de Ve \" End verbatim text [ 116s] -.ft R [ 116s] -.fi [ 116s] -.. [ 116s] -.\" Set up some character translations and predefined strings. \*(-- will [ 116s] -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left [ 116s] -.\" double quote, and \*(R" will give a right double quote. \*(C+ will [ 116s] -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and [ 116s] -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, [ 116s] -.\" nothing in troff, for use with C<>. [ 116s] -.tr \(*W- [ 116s] -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' [ 116s] -.ie n \{\ [ 116s] -. ds -- \(*W- [ 116s] -. ds PI pi [ 116s] -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch [ 116s] -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch [ 116s] -. ds L" "" [ 116s] -. ds R" "" [ 116s] -. ds C` "" [ 116s] -. ds C' "" [ 116s] -'br\} [ 116s] -.el\{\ [ 116s] -. ds -- \|\(em\| [ 116s] -. ds PI \(*p [ 116s] -. ds L" `` [ 116s] -. ds R" '' [ 116s] -. ds C` [ 116s] -. ds C' [ 116s] -'br\} [ 116s] -.\" [ 116s] -.\" Escape single quotes in literal strings from groff's Unicode transform. [ 116s] -.ie \n(.g .ds Aq \(aq [ 116s] -.el .ds Aq ' [ 116s] -.\" [ 116s] -.\" If the F register is turned on, we'll generate index entries on stderr for [ 116s] -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index [ 116s] -.\" entries marked with X<> in POD. Of course, you'll have to process the [ 116s] -.\" output yourself in some meaningful fashion. [ 116s] -.\" [ 116s] -.\" Avoid warning from groff about undefined register 'F'. [ 116s] -.de IX [ 116s] -.. [ 116s] -.nr rF 0 [ 116s] -.if \n(.g .if rF .nr rF 1 [ 116s] -.if (\n(rF:(\n(.g==0)) \{ [ 116s] -. if \nF \{ [ 116s] -. de IX [ 116s] -. tm Index:\\$1\t\\n%\t"\\$2" [ 116s] -.. [ 116s] -. if !\nF==2 \{ [ 116s] -. nr % 0 [ 116s] -. nr F 2 [ 116s] -. \} [ 116s] -. \} [ 116s] -.\} [ 116s] -.rr rF [ 116s] -.\" [ 116s] -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). [ 116s] -.\" Fear. Run. Save yourself. No user-serviceable parts. [ 116s] -. \" fudge factors for nroff and troff [ 116s] -.if n \{\ [ 116s] -. ds #H 0 [ 116s] -. ds #V .8m [ 116s] -. ds #F .3m [ 116s] -. ds #[ \f1 [ 116s] -. ds #] \fP [ 116s] -.\} [ 116s] -.if t \{\ [ 116s] -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) [ 116s] -. ds #V .6m [ 116s] -. ds #F 0 [ 116s] -. ds #[ \& [ 116s] -. ds #] \& [ 116s] -.\} [ 116s] -. \" simple accents for nroff and troff [ 116s] -.if n \{\ [ 116s] -. ds ' \& [ 116s] -. ds ` \& [ 116s] -. ds ^ \& [ 116s] -. ds , \& [ 116s] -. ds ~ ~ [ 116s] -. ds / [ 116s] -.\} [ 116s] -.if t \{\ [ 116s] -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" [ 116s] -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' [ 116s] -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' [ 116s] -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' [ 116s] -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' [ 116s] -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' [ 116s] -.\} [ 116s] -. \" troff and (daisy-wheel) nroff accents [ 116s] -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' [ 116s] -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' [ 116s] -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] [ 116s] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' [ 116s] -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' [ 116s] -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] [ 116s] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] [ 116s] -.ds ae a\h'-(\w'a'u*4/10)'e [ 116s] -.ds Ae A\h'-(\w'A'u*4/10)'E [ 116s] -. \" corrections for vroff [ 116s] -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' [ 116s] -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' [ 116s] -. \" for low resolution devices (crt and lpr) [ 116s] -.if \n(.H>23 .if \n(.V>19 \ [ 116s] -\{\ [ 116s] -. ds : e [ 116s] -. ds 8 ss [ 116s] -. ds o a [ 116s] -. ds d- d\h'-1'\(ga [ 116s] -. ds D- D\h'-1'\(hy [ 116s] -. ds th \o'bp' [ 116s] -. ds Th \o'LP' [ 116s] -. ds ae ae [ 116s] -. ds Ae AE [ 116s] -.\} [ 116s] -.rm #[ #] #H #V #F C [ 116s] -.\" ======================================================================== [ 116s] -.\" [ 116s] -.IX Title "dos2unix 1" [ 116s] -.TH dos2unix 1 "uq2000-02-02" "dos2unix" "2016-08-06" [ 116s] -.\" For nroff, turn off justification. Always turn off hyphenation; it makes [ 116s] -.\" way too many mistakes in technical documents. [ 116s] -.if n .ad l [ 116s] -.nh [ 116s] -.SH "NOMBRE" [ 116s] -.IX Header "NOMBRE" [ 116s] -dos2unix \- Convertidor de archivos de texto de formato DOS/Mac a Unix y viceversa [ 116s] -.SH "SINOPSIS" [ 116s] -.IX Header "SINOPSIS" [ 116s] -.Vb 2 [ 116s] -\& dos2unix [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 116s] -\& unix2dos [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 116s] -.Ve [ 116s] -.SH "DESCRIPCI\['O]N" [ 116s] -.IX Header "DESCRIPCIO'N" [ 116s] -El paquete Dos2unix incluye las utiler\['i]as \f(CW\*(C`dos2unix\*(C'\fR y \f(CW\*(C`unix2dos\*(C'\fR para [ 116s] -convertir archivos de texto plano en formato \s-1DOS\s0 o Mac a formato Unix y viceversa. [ 116s] -.PP [ 116s] -En archivos de texto DOS/Windows, un salto de l\['i]nea, tambi\['e]n conocido como nueva [ 116s] -l\['i]nea, es una combinaci\['o]n de dos caracteres: un retorno de carro (\s-1CR\s0) seguido [ 116s] -por un salto de l\['i]nea (\s-1LF\s0). En archivos de texto Unix, un salto de l\['i]nea es [ 116s] -solamente un car\['a]cter: el salto de l\['i]nea (\s-1LF\s0). En archivos de texto Mac, antes [ 116s] -de Mac \s-1OS X,\s0 un salto de l\['i]nea era s\['o]lo un car\['a]cter retorno de carro (\s-1CR\s0). [ 116s] -Actualmente, Mac \s-1OS\s0 usa el estilo Unix de saltos de l\['i]nea (\s-1LF\s0). [ 116s] -.PP [ 116s] -Los archivos binarios son ignorados autom\['a]ticamente, a menos que se fuerce su [ 116s] -conversi\['o]n. [ 116s] -.PP [ 116s] -Los archivos no regulares, tales como directorios y \s-1FIFO,\s0 son ignorados [ 116s] -autom\['a]ticamente. [ 116s] -.PP [ 116s] -Los enlaces simb\['o]licos y sus destinos no son modificados por defecto. [ 116s] -Los enlaces simb\['o]licos pueden opcionalmente ser reemplazados, o la salida puede [ 116s] -ser escrita al archivo destino del enlace. [ 116s] -Los enlaces simb\['o]licos en Windows no est\['a]n soportados. Estos son siempre [ 116s] -reemplazados, sin que se alteren sus destinos. [ 116s] -.PP [ 116s] -Dos2unix fue moldeado a partir del dos2unix que existe en SunOS/Solaris y tiene [ 116s] -modos de conversi\['o]n similares. [ 116s] -.SH "PAR\['A]METROS" [ 116s] -.IX Header "PARA'METROS" [ 116s] -.IP "\fB\-\-\fR" 4 [ 116s] -.IX Item "--" [ 116s] -Todos los par\['a]metros siguientes son tratados como nombres de archivo. Use este [ 116s] -par\['a]metro si desea convertir archivos cuyos nombres inician con un gui\['o]n. Por [ 116s] -ejemplo para convertir un archivo llamado \*(L"\-foo\*(R", use este comando: [ 116s] -.Sp [ 116s] -.Vb 1 [ 116s] -\& dos2unix \-\- \-foo [ 116s] -.Ve [ 116s] -.Sp [ 116s] -O en modo de archivo nuevo: [ 116s] -.Sp [ 116s] -.Vb 1 [ 116s] -\& dos2unix \-n \-\- \-foo out.txt [ 116s] -.Ve [ 116s] -.IP "\fB\-ascii\fR" 4 [ 116s] -.IX Item "-ascii" [ 116s] -S\['o]lo convierte los salto de l\['i]nea. \['E]ste es el modo de conversi\['o]n por defecto. [ 116s] -.IP "\fB\-iso\fR" 4 [ 116s] -.IX Item "-iso" [ 116s] compare /.build.oldpackages/dos2unix-debuginfo-6.0-7.48.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debuginfo-6.0-7.49.armv7l.rpm [ 116s] skipping -debuginfo package [ 116s] compare /.build.oldpackages/dos2unix-debugsource-6.0-7.48.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debugsource-6.0-7.49.armv7l.rpm [ 116s] Comparing dos2unix-debugsource-6.0-7.48.armv7l.rpm to dos2unix-debugsource-6.0-7.49.armv7l.rpm [ 116s] This is not a prerelease project. Compare the project name. [ 116s] comparing rpmtags [ 116s] comparing RELEASE [ 116s] comparing PROVIDES [ 116s] comparing scripts [ 117s] comparing filelist [ 117s] comparing file checksum [ 117s] creating rename script [ 117s] RPM meta information is identical [ 117s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 117s] ... saving built statistics [ 117s] ... saving built packages [ 117s] /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-6.0-7.49.armv7l.rpm [ 117s] /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debuginfo-6.0-7.49.armv7l.rpm [ 117s] /home/abuild/rpmbuild/RPMS/armv7l/dos2unix-debugsource-6.0-7.49.armv7l.rpm [ 117s] /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-7.49.src.rpm [ 117s] /home/abuild/rpmbuild/OTHER/_statistics [ 117s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 117s] [ 117s] w15 finished "build dos2unix.spec" at Sun Aug 28 04:42:36 UTC 2016. [ 117s] [ 120s] [ 106.805086] SysRq : Power Off [ 120s] [ 107.016178] Power down. [ 121s] build: extracting built packages... [ 121s] dos2unix-6.0-7.49.armv7l.rpm [ 121s] dos2unix-debuginfo-6.0-7.49.armv7l.rpm [ 121s] dos2unix-debugsource-6.0-7.49.armv7l.rpm [ 121s] dos2unix-6.0-7.49.src.rpm [ 121s] _statistics [ 121s] rpmlint.log