[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=aarch64 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w07 started "build _service:gbs:dos2unix.spec" at Fri Sep 23 18:54:09 UTC 2016. [ 0s] [ 0s] Building dos2unix for project 'Tizen:Mobile' repository 'arm64-wayland' arch 'aarch64' srcmd5 'b862b888df7b8c2f525c84d589c17ea0' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:dos2unix.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:dos2unix.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 2s] [13/40] preinstalling libgcc... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-aarch64... [ 5s] [25/40] preinstalling qemu-linux-user-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] [1/9] preinstalling libext2fs... [ 7s] [2/9] preinstalling libpcre... [ 7s] [3/9] preinstalling libsmartcols... [ 7s] [4/9] preinstalling libuuid... [ 7s] [5/9] preinstalling perl... [ 8s] [6/9] preinstalling grep... [ 8s] [7/9] preinstalling libblkid... [ 8s] [8/9] preinstalling libmount... [ 8s] [9/9] preinstalling util-linux... [ 8s] copying packages... [ 8s] reordering...cycle: nss -> libsoftokn3 [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 10s] booting kvm ... [ 10s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 8 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 14s] Waiting for device /dev/vda to appear: ok [ 14s] fsck from util-linux 2.21.2 [ 14s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 14s] /dev/vda: clean, 4997/4194304 files, 376983/16777216 blocks [ 14s] fsck succeeded. Mounting root device read-write. [ 14s] Mounting root /dev/vda [ 14s] mount -o rw -t ext4 /dev/vda /root [ 14s] replacing /etc/mtab with symlink to /proc/self/mounts [ 16s] 2nd stage started in virtual machine [ 16s] machine type: aarch64 [ 16s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 16s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 16s] swapon /dev/vdb [ 16s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 17s] mount: none is already mounted or /proc busy [ 17s] mount: none is already mounted or /dev/pts busy [ 17s] logging output to //.build.log... [ 17s] processing specfile /.build-srcdir/_service:gbs:dos2unix.spec ... [ 17s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 22s] running qemu-linux-user-cross postinstall script [ 23s] running qemu-accel-aarch64 postinstall script [ 23s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/4.9.2/liblto_plugin.so': No such file or directory [ 23s] running setup postinstall script [ 23s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 23s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 23s] initializing rpm db... [ 28s] [1/93] installing libmagic-data-5.28-4.1 [ 29s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [2/93] installing setup-0.9-3.5 [ 29s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [3/93] installing terminfo-base-5.9-1.14 [ 30s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [4/93] installing filesystem-3.1-10.1 [ 30s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [5/93] installing glibc-2.20-11.1 [ 31s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [6/93] installing bash-3.2.57-3.6 [ 31s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 31s] [7/93] installing cpio-2.11-1.8 [ 31s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 32s] [8/93] installing diffutils-3.3-1.8 [ 32s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 32s] [9/93] installing findutils-4.3.8-3.1 [ 32s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 32s] [10/93] installing hostname-3.12-1.7 [ 32s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 32s] [11/93] installing libatomic-4.9.2-13.3 [ 33s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] [12/93] installing libattr-2.4.47-1.13 [ 33s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] [13/93] installing libbz2-1.0.6-1.91 [ 33s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] [14/93] installing libcap-2.24-1.86 [ 33s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] [15/93] installing libelf-0.153-5.23 [ 33s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 33s] [16/93] installing libext2fs-1.42.13-2.9 [ 34s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [17/93] installing libfreebl3-3.23-4.40 [ 34s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [18/93] installing libgcc-4.9.2-13.3 [ 34s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [19/93] installing libgomp-4.9.2-13.3 [ 34s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [20/93] installing libitm-4.9.2-13.3 [ 34s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [21/93] installing libltdl-2.4.2-3.6 [ 34s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [22/93] installing liblua-5.1.4-1.11 [ 35s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [23/93] installing liblzma-5.1.3-3.1 [ 35s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [24/93] installing libpcre-8.39-2.6 [ 35s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [25/93] installing libpopt-1.16-2.4 [ 35s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 35s] [26/93] installing libsmack-1.2.0-4.8 [ 36s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [27/93] installing libsmartcols-2.28-7.2 [ 36s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [28/93] installing libsqlite-3.8.10.2-1.8 [ 36s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [29/93] installing libuuid-2.28-7.2 [ 36s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [30/93] installing m4-1.4.17-1.5 [ 36s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [31/93] installing net-tools-2.0_20121208git-1.7 [ 36s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [32/93] installing nspr-4.12-4.14 [ 36s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 36s] [33/93] installing patch-2.7-1.6 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [34/93] installing pkg-config-0.28-1.9 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [35/93] installing sed-4.1c-2.5 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [36/93] installing update-alternatives-1.16.3-1.5 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [37/93] installing which-2.20-1.5 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [38/93] installing zlib-1.2.8-1.11 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [39/93] installing libncurses-5.9-1.14 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [40/93] installing build-compare-2015.04.28-4.2 [ 37s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 37s] [41/93] installing qemu-linux-user-cross-2.7.0-1.1 [ 38s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 38s] [42/93] installing coreutils-6.9-8.1 [ 39s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 39s] [43/93] installing cpp-4.9.2-13.3 [ 40s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [44/93] installing gawk-3.1.5-2.9 [ 40s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] [45/93] installing gcc-c++-4.9.2-13.3 [ 42s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [46/93] installing grep-2.5.2-2.9 [ 43s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [47/93] installing less-466-1.7 [ 43s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [48/93] installing libacl-2.2.52-3.8 [ 43s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [49/93] installing libasm-0.153-5.23 [ 43s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [50/93] installing libblkid-2.28-7.2 [ 43s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [51/93] installing libreadline-5.2-2.6 [ 44s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [52/93] installing libstdc++-4.9.2-13.3 [ 44s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [53/93] installing make-4.0-1.6 [ 45s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [54/93] installing nss-certs-3.23-4.40 [ 46s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [55/93] installing smack-1.2.0-4.8 [ 48s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [56/93] installing binutils-2.25-6.8 [ 51s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [57/93] installing bzip2-1.0.6-1.91 [ 52s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [58/93] installing libmagic-5.28-4.1 [ 52s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [59/93] installing libxml2-2.9.4-5.7 [ 53s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [60/93] installing xz-5.1.3-3.1 [ 53s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [61/93] installing libdw-0.153-5.23 [ 54s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [62/93] installing libstdc++-devel-4.9.2-13.3 [ 54s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [63/93] installing file-5.28-4.1 [ 54s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [64/93] installing libmount-2.28-7.2 [ 54s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 54s] [65/93] installing linux-glibc-devel-3.10-1.4 [ 55s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [66/93] installing tar-1.17-2.7 [ 55s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [67/93] installing db4-4.8.30.NC-1.18 [ 55s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [68/93] installing gettext-runtime-0.19.7-2.7 [ 55s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 55s] [69/93] installing glibc-locale-2.20-11.1 [ 56s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [70/93] installing gzip-1.3.12-2.9 [ 56s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [71/93] installing libfdisk1-2.28-7.2 [ 56s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [72/93] installing libubsan-4.9.2-13.3 [ 56s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 56s] [73/93] installing pam-1.1.6-4.8 [ 57s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 57s] [74/93] installing tzdata-2016f-2.3 [ 57s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 57s] [75/93] installing elfutils-0.153-5.23 [ 57s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 58s] [76/93] installing glibc-devel-2.20-11.1 [ 58s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 58s] [77/93] installing gettext-tools-0.19.7-2.7 [ 58s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 59s] [78/93] installing perl-5.20.0-3.56 [ 62s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 62s] [79/93] installing gcc-4.9.2-13.3 [ 62s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 62s] [80/93] installing util-linux-2.28-7.2 [ 62s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 63s] [81/93] installing build-mkbaselibs-20120927-1.3 [ 63s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 63s] [82/93] installing qemu-accel-aarch64-0.4-9.2 [ 67s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [83/93] installing autoconf-2.69-1.4 [ 67s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [84/93] installing util-linux-su-2.28-7.2 [ 67s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 67s] [85/93] installing automake-1.14.1-1.4 [ 67s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [86/93] installing build-20120927-1.3 [ 68s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [87/93] installing libtool-2.4.2-3.6 [ 68s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [88/93] installing nss-3.23-4.40 [ 68s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [89/93] installing libsoftokn3-3.23-4.40 [ 68s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 68s] [90/93] installing rpm-4.11.0.1-8.2 [ 69s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [91/93] installing rpmlint-mini-1.5-3.21 [ 69s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [92/93] installing rpm-build-4.11.0.1-8.2 [ 69s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [93/93] installing rpmlint-tizen-1.0-1.3 [ 69s] error: Failed to dlopen /usr/lib64/rpm-plugins/msm.so /usr/lib64/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] removing nis flags from //etc/nsswitch.conf... [ 69s] now finalizing build dir... [ 70s] qemu: Unsupported syscall: 219 [ 75s] build target is aarch64-tizen-linux [ 75s] ----------------------------------------------------------------- [ 75s] I have the following modifications for dos2unix.spec: [ 75s] 4c4 [ 75s] < Release: 0 [ 75s] --- [ 75s] > Release: 8.2 [ 75s] ----------------------------------------------------------------- [ 75s] ----- building dos2unix.spec (user abuild) [ 75s] ----------------------------------------------------------------- [ 75s] ----------------------------------------------------------------- [ 75s] Running qemu build hang workaround... [ 75s] /bin/ps command not found [ 75s] qemu: Unsupported syscall: 219 [ 75s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Mobile/arm64-wayland/b862b888df7b8c2f525c84d589c17ea0-dos2unix' /home/abuild/rpmbuild/SOURCES/dos2unix.spec [ 75s] Building target platforms: aarch64-tizen-linux [ 75s] Building for target aarch64-tizen-linux [ 75s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.xFS2LU [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + rm -rf dos2unix-6.0 [ 75s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dos2unix-6.0.tar.gz [ 75s] + /bin/tar -xf - [ 75s] + STATUS=0 [ 75s] + '[' 0 -ne 0 ']' [ 75s] + cd dos2unix-6.0 [ 75s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 75s] + echo 'Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch):' [ 75s] Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch): [ 75s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-encoding-is-changed-from-latin1-to-utf8.patch [ 75s] + /bin/patch -p1 --fuzz=2 [ 75s] patching file man/es/man1/dos2unix.pod [ 75s] patching file man/nl/man1/dos2unix.pod [ 75s] + cp /home/abuild/rpmbuild/SOURCES/dos2unix.manifest . [ 75s] + find . -type f [ 75s] + xargs chmod -x [ 75s] + exit 0 [ 75s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.yCKrq1 [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd dos2unix-6.0 [ 75s] ++ uname -m [ 75s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 75s] + ref=/usr/lib/rpm [ 75s] + for s in guess sub [ 75s] ++ find -maxdepth 8 -name config.guess [ 75s] + for s in guess sub [ 75s] ++ find -maxdepth 8 -name config.sub [ 75s] + LANG=C [ 75s] + export LANG [ 75s] + unset DISPLAY [ 75s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 75s] + export CFLAGS [ 75s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 75s] + export CXXFLAGS [ 75s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 75s] + export FFLAGS [ 75s] + LDFLAGS= [ 75s] + export LDFLAGS [ 75s] + LD_AS_NEEDED=1 [ 75s] + export LD_AS_NEEDED [ 75s] + export RPM_OPT_FLAGS [ 75s] + make -j8 CC=gcc HTMLEXT=html [ 76s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c dos2unix.c -o dos2unix.o [ 76s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c querycp.c -o querycp.o [ 76s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c common.c -o common.o [ 76s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c unix2dos.c -o unix2dos.o [ 76s] LC_CTYPE=C pod2text man/man1/dos2unix.pod > dos2unix.txt [ 76s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.html [ 76s] msgfmt -c po/eo.po -o po/eo.mo [ 76s] msgfmt -c po/es.po -o po/es.mo [ 76s] msgfmt -c po/de.po -o po/de.mo [ 76s] msgfmt -c po/nl.po -o po/nl.mo [ 76s] po/nl.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 76s] and iconv() does not support "ISO-8859-1". [ 76s] Installing GNU libiconv and then reinstalling GNU gettext [ 76s] would fix this problem. [ 76s] Continuing anyway. [ 76s] make -C man/man1 [ 76s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 76s] # make target - create manual page from a *.pod page [ 76s] podchecker dos2unix.pod [ 76s] po/es.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 76s] and iconv() does not support "ISO-8859-1". [ 76s] Installing GNU libiconv and then reinstalling GNU gettext [ 76s] would fix this problem. [ 76s] Continuing anyway. [ 76s] po/es.po:8: warning: header field 'Language' still has the initial default value [ 76s] make -C man/man1 [ 76s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 76s] # make target - create manual page from a *.pod page [ 76s] podchecker dos2unix.pod [ 76s] make -C man/man1 [ 76s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 76s] # make target - create manual page from a *.pod page [ 76s] podchecker dos2unix.pod [ 76s] # make target - create manual page from a *.pod page [ 76s] podchecker ../nl/man1/dos2unix.pod [ 77s] # make target - create manual page from a *.pod page [ 77s] podchecker ../nl/man1/dos2unix.pod [ 77s] # make target - create manual page from a *.pod page [ 77s] podchecker ../nl/man1/dos2unix.pod [ 77s] # make target - create manual page from a *.pod page [ 77s] podchecker ../es/man1/dos2unix.pod [ 78s] gcc dos2unix.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o dos2unix [ 78s] dos2unix.pod pod syntax OK. [ 78s] LC_CTYPE=C pod2man \ [ 78s] --center="$(date "+%Y-%m-%d")" \ [ 78s] --name="dos2unix" \ [ 78s] --section="1" \ [ 78s] dos2unix.pod \ [ 78s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 78s] > dos2unix.1 && \ [ 78s] rm -f pod*.tmp [ 78s] dos2unix.pod pod syntax OK. [ 78s] ../nl/man1/dos2unix.pod pod syntax OK. [ 78s] dos2unix.pod pod syntax OK. [ 78s] LC_CTYPE=C pod2man \ [ 78s] --center="$(date "+%Y-%m-%d")" \ [ 78s] --name="dos2unix" \ [ 78s] --section="1" \ [ 78s] dos2unix.pod \ [ 78s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 78s] > dos2unix.1 && \ [ 78s] rm -f pod*.tmp [ 78s] ../nl/man1/dos2unix.pod pod syntax OK. [ 78s] LC_CTYPE=C pod2man \ [ 78s] --center="$(date "+%Y-%m-%d")" \ [ 78s] --name="dos2unix" \ [ 78s] --section="1" \ [ 78s] ../nl/man1/dos2unix.pod \ [ 78s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 78s] > ../nl/man1/dos2unix.1 && \ [ 78s] rm -f pod*.tmp [ 78s] LC_CTYPE=C pod2man \ [ 78s] --center="$(date "+%Y-%m-%d")" \ [ 78s] --name="dos2unix" \ [ 78s] --section="1" \ [ 78s] dos2unix.pod \ [ 78s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 78s] > dos2unix.1 && \ [ 78s] rm -f pod*.tmp [ 78s] LC_CTYPE=C pod2man \ [ 78s] --center="$(date "+%Y-%m-%d")" \ [ 78s] --name="dos2unix" \ [ 78s] --section="1" \ [ 78s] ../nl/man1/dos2unix.pod \ [ 78s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 78s] > ../nl/man1/dos2unix.1 && \ [ 78s] rm -f pod*.tmp [ 78s] ../nl/man1/dos2unix.pod pod syntax OK. [ 78s] LC_CTYPE=C pod2man \ [ 78s] --center="$(date "+%Y-%m-%d")" \ [ 78s] --name="dos2unix" \ [ 78s] --section="1" \ [ 78s] ../nl/man1/dos2unix.pod \ [ 78s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 78s] > ../nl/man1/dos2unix.1 && \ [ 78s] rm -f pod*.tmp [ 78s] gcc unix2dos.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o unix2dos [ 78s] # make target - create manual page from a *.pod page [ 78s] podchecker ../es/man1/dos2unix.pod [ 78s] ../es/man1/dos2unix.pod pod syntax OK. [ 78s] LC_CTYPE=C pod2man \ [ 78s] --center="$(date "+%Y-%m-%d")" \ [ 78s] --name="dos2unix" \ [ 78s] --section="1" \ [ 78s] ../es/man1/dos2unix.pod \ [ 78s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 78s] > ../es/man1/dos2unix.1 && \ [ 78s] rm -f pod*.tmp [ 79s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 79s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 79s] perl -pli.bak \ [ 79s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 79s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 79s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 79s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 79s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 79s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 79s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 79s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 79s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 79s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 79s] dos2unix.1 [ 79s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 79s] POD document had syntax errors at /bin/pod2man line 71. [ 79s] POD document had syntax errors at /bin/pod2man line 71. [ 79s] perl -pli.bak \ [ 79s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 79s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 79s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 79s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 79s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 79s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 79s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 79s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 79s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 79s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 79s] ../nl/man1/dos2unix.1 [ 79s] ln -sf dos2unix mac2unix [ 79s] ln -sf unix2dos unix2mac [ 79s] POD document had syntax errors at /bin/pod2man line 71. [ 79s] # make target - create manual page from a *.pod page [ 79s] podchecker ../es/man1/dos2unix.pod [ 79s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 79s] ../es/man1/dos2unix.pod pod syntax OK. [ 79s] LC_CTYPE=C pod2man \ [ 79s] --center="$(date "+%Y-%m-%d")" \ [ 79s] --name="dos2unix" \ [ 79s] --section="1" \ [ 79s] ../es/man1/dos2unix.pod \ [ 79s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 79s] > ../es/man1/dos2unix.1 && \ [ 79s] rm -f pod*.tmp [ 79s] POD document had syntax errors at /bin/pod2man line 71. [ 79s] perl -pli.bak \ [ 79s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 79s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 79s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 79s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 79s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 79s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 79s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 79s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 79s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 79s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 79s] ../es/man1/dos2unix.1 [ 80s] perl -pli.bak \ [ 80s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 80s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 80s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 80s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 80s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 80s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 80s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 80s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 80s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 80s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 80s] dos2unix.1 [ 80s] perl -pli.bak \ [ 80s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 80s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 80s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 80s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 80s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 80s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 80s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 80s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 80s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 80s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 80s] dos2unix.1 [ 80s] perl -pli.bak \ [ 80s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 80s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 80s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 80s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 80s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 80s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 80s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 80s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 80s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 80s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 80s] ../nl/man1/dos2unix.1 [ 80s] perl -pli.bak \ [ 80s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 80s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 80s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 80s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 80s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 80s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 80s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 80s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 80s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 80s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 80s] ../nl/man1/dos2unix.1 [ 80s] ../es/man1/dos2unix.pod pod syntax OK. [ 80s] LC_CTYPE=C pod2man \ [ 80s] --center="$(date "+%Y-%m-%d")" \ [ 80s] --name="dos2unix" \ [ 80s] --section="1" \ [ 80s] ../es/man1/dos2unix.pod \ [ 80s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 80s] > ../es/man1/dos2unix.1 && \ [ 80s] rm -f pod*.tmp [ 80s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 80s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 80s] POD document had syntax errors at /bin/pod2man line 71. [ 80s] perl -pli.bak \ [ 80s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 80s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 80s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 80s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 80s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 80s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 80s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 80s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 80s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 80s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 80s] ../es/man1/dos2unix.1 [ 80s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 80s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 81s] POD document had syntax errors at /bin/pod2man line 71. [ 81s] perl -pli.bak \ [ 81s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 81s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 81s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 81s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 81s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 81s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 81s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 81s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 81s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 81s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 81s] ../es/man1/dos2unix.1 [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 81s] + exit 0 [ 81s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.gsrHwo [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd dos2unix-6.0 [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 [ 81s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 [ 81s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 install [ 81s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.htm [ 82s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/bin [ 82s] install -m 755 dos2unix /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/bin [ 82s] install -m 755 unix2dos /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/bin [ 82s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/bin; ln -sf dos2unix mac2unix [ 82s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/bin; ln -sf unix2dos unix2mac [ 82s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/man1 [ 82s] install -m 644 man/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/man1 [ 82s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/man1; ln -sf dos2unix.1 mac2unix.1 [ 82s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2dos.1 [ 82s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2mac.1 [ 82s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/nl/man1/ ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/es/man1/ ; [ 82s] install -m 644 man/nl/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/nl/man1/ ; install -m 644 man/es/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/es/man1/ ; [ 82s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; [ 83s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; [ 83s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; [ 83s] -- install-mo [ 83s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/eo/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/es/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/de/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/nl/LC_MESSAGES ; [ 83s] install -m 644 po/eo.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/eo/LC_MESSAGES/dos2unix.mo ; install -m 644 po/es.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/es/LC_MESSAGES/dos2unix.mo ; install -m 644 po/de.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/de/LC_MESSAGES/dos2unix.mo ; install -m 644 po/nl.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/locale/nl/LC_MESSAGES/dos2unix.mo ; [ 83s] -- install-doc [ 83s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/doc/dos2unix-6.0 [ 83s] install -m 644 README.txt NEWS.txt ChangeLog.txt COPYING.txt TODO.txt BUGS.txt dos2unix.txt dos2unix.htm /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/doc/dos2unix-6.0 [ 83s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/info/dir [ 83s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 -regex '.*\.la$' [ 83s] + xargs rm -f -- [ 83s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 -regex '.*\.a$' [ 83s] + xargs rm -f -- docdir=/usr/share/doc/packages/dos2unix [ 83s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 dos2unix --all-name --with-man [ 83s] find: `/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/share/help/': No such file or directory [ 83s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dos2unix-6.0 [ 83s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/bin/dos2unix [ 84s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64/usr/bin/unix2dos [ 84s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 84s] cpio: glibc-2.20/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 84s] 284 blocks [ 84s] + /usr/lib/rpm/check-buildroot [ 84s] + /usr/lib/rpm//brp-compress [ 85s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 85s] + /usr/lib/rpm/brp-python-hardlink [ 85s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 [ 85s] Processing files: dos2unix-6.0-8.2.aarch64 [ 85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 85s] [ 86s] Provides: dos2unix = 6.0-8.2 dos2unix(aarch-64) = 6.0-8.2 unix2dos = 6.0 [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 86s] Obsoletes: unix2dos < 6.0 [ 86s] Processing files: dos2unix-debugsource-6.0-8.2.aarch64 [ 86s] Provides: dos2unix-debugsource = 6.0-8.2 dos2unix-debugsource(aarch-64) = 6.0-8.2 [ 86s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 86s] Processing files: dos2unix-debuginfo-6.0-8.2.aarch64 [ 86s] warning: File listed twice: /usr/lib/debug/.build-id [ 86s] Provides: dos2unix-debuginfo = 6.0-8.2 dos2unix-debuginfo(aarch-64) = 6.0-8.2 [ 86s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 86s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 [ 86s] warning: Could not canonicalize hostname: w07 [ 86s] Wrote: /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-8.2.src.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-8.2.aarch64.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-8.2.aarch64.rpm [ 86s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-8.2.aarch64.rpm [ 86s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.NItlqr [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd dos2unix-6.0 [ 86s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-8.2.aarch64 [ 86s] + exit 0 [ 86s] ... checking for files with abuild user/group [ 86s] [ 86s] RPMLINT report: [ 86s] =============== [ 87s] qemu: Unsupported syscall: 219 [ 88s] dos2unix.aarch64: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 88s] dos2unix.src: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 88s] The value of the Group tag in the package is not valid. Valid groups are [ 88s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 88s] [ 88s] dos2unix.aarch64: W: files-duplicate /usr/share/man/es/man1/dos2unix.1.gz /usr/share/man/nl/man1/dos2unix.1.gz:/usr/share/man/man1/dos2unix.1.gz [ 88s] 2 packages and 0 specfiles checked; 2 errors, 1 warnings. [ 88s] [ 88s] ... creating baselibs [ 88s] qemu: Unsupported syscall: 219 [ 89s] ... comparing built packages with the former built [ 89s] /usr/lib/build/pkg-diff.sh [ 89s] compare /.build.oldpackages/dos2unix-6.0-8.1.src.rpm /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-8.2.src.rpm [ 89s] This is not a prerelease project. Compare the project name. [ 89s] comparing rpmtags [ 90s] comparing RELEASE [ 90s] comparing PROVIDES [ 90s] comparing scripts [ 90s] comparing filelist [ 90s] comparing file checksum [ 90s] RPM meta information is identical [ 90s] compare /.build.oldpackages/dos2unix-6.0-8.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-8.2.aarch64.rpm [ 90s] Comparing dos2unix-6.0-8.1.aarch64.rpm to dos2unix-6.0-8.2.aarch64.rpm [ 90s] This is not a prerelease project. Compare the project name. [ 90s] comparing rpmtags [ 91s] comparing RELEASE [ 91s] comparing PROVIDES [ 91s] comparing scripts [ 91s] comparing filelist [ 91s] comparing file checksum [ 91s] creating rename script [ 91s] RPM file checksum differs. [ 91s] Extracting packages [ 91s] /usr/share/man/es/man1/dos2unix.1 differs (troff or preprocessor input, ASCII text) [ 91s] --- old//usr/share/man/es/man1/dos2unix.1 2016-09-23 18:55:40.686384781 +0000 [ 91s] +++ new//usr/share/man/es/man1/dos2unix.1 2016-09-23 18:55:40.698384781 +0000 [ 91s] @@ -1,633 +0,0 @@ [ 91s] -.\" Overly verbose Pod::Man [ 91s] -.\" [ 91s] -.\" Standard preamble: [ 91s] -.\" ======================================================================== [ 91s] -.de Sp \" Vertical space (when we can't use .PP) [ 91s] -.if t .sp .5v [ 91s] -.if n .sp [ 91s] -.. [ 91s] -.de Vb \" Begin verbatim text [ 91s] -.ft CW [ 91s] -.nf [ 91s] -.ne \\$1 [ 91s] -.. [ 91s] -.de Ve \" End verbatim text [ 91s] -.ft R [ 91s] -.fi [ 91s] -.. [ 91s] -.\" Set up some character translations and predefined strings. \*(-- will [ 91s] -.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left [ 91s] -.\" double quote, and \*(R" will give a right double quote. \*(C+ will [ 91s] -.\" give a nicer C++. Capital omega is used to do unbreakable dashes and [ 91s] -.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff, [ 91s] -.\" nothing in troff, for use with C<>. [ 91s] -.tr \(*W- [ 91s] -.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' [ 91s] -.ie n \{\ [ 91s] -. ds -- \(*W- [ 91s] -. ds PI pi [ 91s] -. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch [ 91s] -. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch [ 91s] -. ds L" "" [ 91s] -. ds R" "" [ 91s] -. ds C` "" [ 91s] -. ds C' "" [ 91s] -'br\} [ 91s] -.el\{\ [ 91s] -. ds -- \|\(em\| [ 91s] -. ds PI \(*p [ 91s] -. ds L" `` [ 91s] -. ds R" '' [ 91s] -. ds C` [ 91s] -. ds C' [ 91s] -'br\} [ 91s] -.\" [ 91s] -.\" Escape single quotes in literal strings from groff's Unicode transform. [ 91s] -.ie \n(.g .ds Aq \(aq [ 91s] -.el .ds Aq ' [ 91s] -.\" [ 91s] -.\" If the F register is turned on, we'll generate index entries on stderr for [ 91s] -.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index [ 91s] -.\" entries marked with X<> in POD. Of course, you'll have to process the [ 91s] -.\" output yourself in some meaningful fashion. [ 91s] -.\" [ 91s] -.\" Avoid warning from groff about undefined register 'F'. [ 91s] -.de IX [ 91s] -.. [ 91s] -.nr rF 0 [ 91s] -.if \n(.g .if rF .nr rF 1 [ 91s] -.if (\n(rF:(\n(.g==0)) \{ [ 91s] -. if \nF \{ [ 91s] -. de IX [ 91s] -. tm Index:\\$1\t\\n%\t"\\$2" [ 91s] -.. [ 91s] -. if !\nF==2 \{ [ 91s] -. nr % 0 [ 91s] -. nr F 2 [ 91s] -. \} [ 91s] -. \} [ 91s] -.\} [ 91s] -.rr rF [ 91s] -.\" [ 91s] -.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). [ 91s] -.\" Fear. Run. Save yourself. No user-serviceable parts. [ 91s] -. \" fudge factors for nroff and troff [ 91s] -.if n \{\ [ 91s] -. ds #H 0 [ 91s] -. ds #V .8m [ 91s] -. ds #F .3m [ 91s] -. ds #[ \f1 [ 91s] -. ds #] \fP [ 91s] -.\} [ 91s] -.if t \{\ [ 91s] -. ds #H ((1u-(\\\\n(.fu%2u))*.13m) [ 91s] -. ds #V .6m [ 91s] -. ds #F 0 [ 91s] -. ds #[ \& [ 91s] -. ds #] \& [ 91s] -.\} [ 91s] -. \" simple accents for nroff and troff [ 91s] -.if n \{\ [ 91s] -. ds ' \& [ 91s] -. ds ` \& [ 91s] -. ds ^ \& [ 91s] -. ds , \& [ 91s] -. ds ~ ~ [ 91s] -. ds / [ 91s] -.\} [ 91s] -.if t \{\ [ 91s] -. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" [ 91s] -. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' [ 91s] -. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' [ 91s] -. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' [ 91s] -. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' [ 91s] -. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' [ 91s] -.\} [ 91s] -. \" troff and (daisy-wheel) nroff accents [ 91s] -.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' [ 91s] -.ds 8 \h'\*(#H'\(*b\h'-\*(#H' [ 91s] -.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] [ 91s] -.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' [ 91s] -.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' [ 91s] -.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] [ 91s] -.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] [ 91s] -.ds ae a\h'-(\w'a'u*4/10)'e [ 91s] -.ds Ae A\h'-(\w'A'u*4/10)'E [ 91s] -. \" corrections for vroff [ 91s] -.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' [ 91s] -.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' [ 91s] -. \" for low resolution devices (crt and lpr) [ 91s] -.if \n(.H>23 .if \n(.V>19 \ [ 91s] -\{\ [ 91s] -. ds : e [ 91s] -. ds 8 ss [ 91s] -. ds o a [ 91s] -. ds d- d\h'-1'\(ga [ 91s] -. ds D- D\h'-1'\(hy [ 91s] -. ds th \o'bp' [ 91s] -. ds Th \o'LP' [ 91s] -. ds ae ae [ 91s] -. ds Ae AE [ 91s] -.\} [ 91s] -.rm #[ #] #H #V #F C [ 91s] -.\" ======================================================================== [ 91s] -.\" [ 91s] -.IX Title "dos2unix 1" [ 91s] -.TH dos2unix 1 "uq2000-02-02" "dos2unix" "uuu2000-05-05" [ 91s] -.\" For nroff, turn off justification. Always turn off hyphenation; it makes [ 91s] -.\" way too many mistakes in technical documents. [ 91s] -.if n .ad l [ 91s] -.nh [ 91s] -.SH "NOMBRE" [ 91s] -.IX Header "NOMBRE" [ 91s] -dos2unix \- Convertidor de archivos de texto de formato DOS/Mac a Unix y viceversa [ 91s] -.SH "SINOPSIS" [ 91s] -.IX Header "SINOPSIS" [ 91s] -.Vb 2 [ 91s] -\& dos2unix [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 91s] -\& unix2dos [par\['a]metros] [ARCHIVO ...] [\-n ARCH_DE_ENTRADA ARCH_DE_SALIDA ...] [ 91s] -.Ve [ 91s] -.SH "DESCRIPCI\['O]N" [ 91s] -.IX Header "DESCRIPCIO'N" [ 91s] -El paquete Dos2unix incluye las utiler\['i]as \f(CW\*(C`dos2unix\*(C'\fR y \f(CW\*(C`unix2dos\*(C'\fR para [ 91s] -convertir archivos de texto plano en formato \s-1DOS\s0 o Mac a formato Unix y viceversa. [ 91s] -.PP [ 91s] -En archivos de texto DOS/Windows, un salto de l\['i]nea, tambi\['e]n conocido como nueva [ 91s] -l\['i]nea, es una combinaci\['o]n de dos caracteres: un retorno de carro (\s-1CR\s0) seguido [ 91s] -por un salto de l\['i]nea (\s-1LF\s0). En archivos de texto Unix, un salto de l\['i]nea es [ 91s] -solamente un car\['a]cter: el salto de l\['i]nea (\s-1LF\s0). En archivos de texto Mac, antes [ 91s] -de Mac \s-1OS X,\s0 un salto de l\['i]nea era s\['o]lo un car\['a]cter retorno de carro (\s-1CR\s0). [ 91s] -Actualmente, Mac \s-1OS\s0 usa el estilo Unix de saltos de l\['i]nea (\s-1LF\s0). [ 91s] -.PP [ 91s] -Los archivos binarios son ignorados autom\['a]ticamente, a menos que se fuerce su [ 91s] -conversi\['o]n. [ 91s] -.PP [ 91s] -Los archivos no regulares, tales como directorios y \s-1FIFO,\s0 son ignorados [ 91s] -autom\['a]ticamente. [ 91s] -.PP [ 91s] -Los enlaces simb\['o]licos y sus destinos no son modificados por defecto. [ 91s] -Los enlaces simb\['o]licos pueden opcionalmente ser reemplazados, o la salida puede [ 91s] -ser escrita al archivo destino del enlace. [ 91s] -Los enlaces simb\['o]licos en Windows no est\['a]n soportados. Estos son siempre [ 91s] -reemplazados, sin que se alteren sus destinos. [ 91s] -.PP [ 91s] -Dos2unix fue moldeado a partir del dos2unix que existe en SunOS/Solaris y tiene [ 91s] -modos de conversi\['o]n similares. [ 91s] -.SH "PAR\['A]METROS" [ 91s] -.IX Header "PARA'METROS" [ 91s] -.IP "\fB\-\-\fR" 4 [ 91s] -.IX Item "--" [ 91s] -Todos los par\['a]metros siguientes son tratados como nombres de archivo. Use este [ 91s] -par\['a]metro si desea convertir archivos cuyos nombres inician con un gui\['o]n. Por [ 91s] -ejemplo para convertir un archivo llamado \*(L"\-foo\*(R", use este comando: [ 91s] -.Sp [ 91s] -.Vb 1 [ 91s] -\& dos2unix \-\- \-foo [ 91s] -.Ve [ 91s] -.Sp [ 91s] -O en modo de archivo nuevo: [ 91s] -.Sp [ 91s] -.Vb 1 [ 91s] -\& dos2unix \-n \-\- \-foo out.txt [ 91s] -.Ve [ 91s] -.IP "\fB\-ascii\fR" 4 [ 91s] -.IX Item "-ascii" [ 91s] -S\['o]lo convierte los salto de l\['i]nea. \['E]ste es el modo de conversi\['o]n por defecto. [ 91s] -.IP "\fB\-iso\fR" 4 [ 91s] -.IX Item "-iso" [ 91s] compare /.build.oldpackages/dos2unix-debuginfo-6.0-8.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-8.2.aarch64.rpm [ 92s] skipping -debuginfo package [ 92s] compare /.build.oldpackages/dos2unix-debugsource-6.0-8.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-8.2.aarch64.rpm [ 92s] Comparing dos2unix-debugsource-6.0-8.1.aarch64.rpm to dos2unix-debugsource-6.0-8.2.aarch64.rpm [ 92s] This is not a prerelease project. Compare the project name. [ 92s] comparing rpmtags [ 92s] comparing RELEASE [ 92s] comparing PROVIDES [ 92s] comparing scripts [ 92s] comparing filelist [ 92s] comparing file checksum [ 92s] creating rename script [ 92s] RPM meta information is identical [ 93s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 93s] rpmlint.log files differ: [ 93s] --- /tmp/tmp.dFWiEG2553 2016-09-23 18:55:42.090384753 +0000 [ 93s] +++ /tmp/tmp.UmSskk2555 2016-09-23 18:55:42.142384752 +0000 [ 93s] @@ -1,6 +1,7 @@ [ 93s] [ 93s] -2 packages and 0 specfiles checked; 2 errors, 0 warnings. [ 93s] +2 packages and 0 specfiles checked; 2 errors, 1 warnings. [ 93s] The value of the Group tag in the package is not valid. Valid groups are [ 93s] dos2unix.aarch64: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 93s] +dos2unix.aarch64: W: files-duplicate /usr/share/man/es/man1/dos2unix.1.gz /usr/share/man/nl/man1/dos2unix.1.gz:/usr/share/man/man1/dos2unix.1.gz [ 93s] dos2unix.src: E: non-standard-group (Badness: 200) Productivity/Text/Convertors [ 93s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 93s] ... saving built statistics [ 93s] ... saving built packages [ 93s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-8.2.aarch64.rpm [ 93s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-8.2.aarch64.rpm [ 93s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-8.2.aarch64.rpm [ 93s] /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-8.2.src.rpm [ 93s] /home/abuild/rpmbuild/OTHER/_statistics [ 93s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 93s] [ 93s] w07 finished "build dos2unix.spec" at Fri Sep 23 18:55:42 UTC 2016. [ 93s] [ 97s] [ 83.379383] SysRq : Power Off [ 97s] [ 83.500654] Power down. [ 97s] build: extracting built packages... [ 98s] dos2unix-6.0-8.2.aarch64.rpm [ 98s] dos2unix-debuginfo-6.0-8.2.aarch64.rpm [ 98s] dos2unix-debugsource-6.0-8.2.aarch64.rpm [ 98s] dos2unix-6.0-8.2.src.rpm [ 98s] _statistics [ 98s] rpmlint.log