[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw04 started "build _service:gbs:gperf.spec" at Fri May 6 05:22:34 UTC 2022. [ 0s] [ 0s] Building gperf for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '60a7f7cec43eadc7401bba931a9be213' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:gperf.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:gperf.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:gperf.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-aarch64 postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] [1/96] installing libmagic-data-5.41-6.304 [ 11s] [2/96] installing setup-0.9-6.8 [ 11s] [3/96] installing filesystem-3.1-4.1 [ 11s] [4/96] installing glibc-2.30-14.2 [ 12s] [5/96] installing bash-3.2.57-5.1 [ 12s] [6/96] installing cpio-2.8-5.3 [ 12s] [7/96] installing diffutils-3.3-4.3 [ 12s] [8/96] installing findutils-4.3.8-5.371 [ 12s] [9/96] installing gdbm-1.8.3-3.671 [ 12s] [10/96] installing hostname-3.23-3.3 [ 12s] [11/96] installing libatomic-9.2.0-16.2 [ 12s] [12/96] installing libattr-2.5.1-5.362 [ 13s] [13/96] installing libblkid-2.37.4-12.5 [ 13s] [14/96] installing libbz2-1.0.8-5.234 [ 13s] [15/96] installing libcap-2.24-4.357 [ 14s] [16/96] installing libext2fs-1.46.0-4.43 [ 14s] [17/96] installing libfreebl3-3.34.1-3.487 [ 14s] [18/96] installing libgcc-9.2.0-16.2 [ 15s] [19/96] installing libgomp-9.2.0-16.2 [ 15s] [20/96] installing libitm-9.2.0-16.2 [ 15s] [21/96] installing libltdl-2.4.6-4.43 [ 16s] [22/96] installing liblua-5.1.5-3.334 [ 16s] [23/96] installing liblzma-5.2.5-5.298 [ 16s] [24/96] installing libopenssl11-1.1.1l-6.217 [ 17s] [25/96] installing libpcre-8.45-5.6 [ 17s] [26/96] installing libpopt-1.16-3.620 [ 18s] [27/96] installing libsmack-1.3.1-4.348 [ 18s] [28/96] installing libsmartcols-2.37.4-12.5 [ 18s] [29/96] installing libsqlite-3.37.2-5.34 [ 19s] [30/96] installing libuuid-2.37.4-12.5 [ 19s] [31/96] installing libzstd1-1.4.5-2.198 [ 19s] [32/96] installing m4-1.4.19-4.1 [ 19s] [33/96] installing net-tools-2.0_20121208git-4.4 [ 19s] [34/96] installing nspr-4.12-3.613 [ 20s] [35/96] installing patch-2.7.6-8.11 [ 20s] [36/96] installing pkg-config-0.29.2-4.29 [ 20s] [37/96] installing sed-4.1c-4.2 [ 20s] [38/96] installing update-alternatives-1.20.5-3.4 [ 20s] [39/96] installing which-2.17-4.4 [ 20s] [40/96] installing zlib-1.2.11-3.650 [ 20s] [41/96] installing build-compare-2015.04.28-3.228 [ 20s] [42/96] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 24s] [43/96] installing terminfo-base-full-6.2-7.280 [ 24s] [44/96] installing coreutils-6.9-5.128 [ 24s] [45/96] installing cpp-9.2.0-16.2 [ 25s] [46/96] installing gawk-3.1.5-4.4 [ 25s] [47/96] installing gcc-c++-9.2.0-16.2 [ 26s] [48/96] installing grep-2.5.2-3.4 [ 26s] [49/96] installing libacl-2.2.53-4.575 [ 26s] [50/96] installing libelf-0.178-4.80 [ 27s] [51/96] installing libgfortran-9.2.0-16.2 [ 27s] [52/96] installing libmount-2.37.4-12.5 [ 27s] [53/96] installing libstdc++-9.2.0-16.2 [ 28s] [54/96] installing make-4.3-3.13 [ 28s] [55/96] installing nss-certs-3.34.1-3.487 [ 28s] [56/96] installing smack-1.3.1-4.348 [ 28s] [57/96] installing bzip2-1.0.8-5.234 [ 28s] [58/96] installing libfdisk-2.37.4-12.5 [ 28s] [59/96] installing libmagic-5.41-6.304 [ 29s] [60/96] installing libxml2-2.9.12-7.154 [ 29s] [61/96] installing perl-5.34.0-7.23 [ 32s] [62/96] installing xz-5.2.5-5.298 [ 32s] [63/96] installing build-mkbaselibs-20120927-3.3 [ 32s] [64/96] installing libstdc++-devel-9.2.0-16.2 [ 32s] [65/96] installing file-5.41-6.304 [ 32s] [66/96] installing linux-glibc-devel-3.10-4.478 [ 33s] [67/96] installing tar-1.17-3.3 [ 33s] [68/96] installing autoconf-2.71-6.44 [ 33s] [69/96] installing binutils-2.33.1-9.252 [ 34s] [70/96] installing glibc-locale-2.30-14.2 [ 34s] [71/96] installing gzip-1.3.12-3.626 [ 35s] [72/96] installing libcc1-9.2.0-16.2 [ 35s] [73/96] installing libubsan-9.2.0-16.2 [ 35s] [74/96] installing pam-1.1.6-4.2 [ 36s] [75/96] installing libncurses6-6.2-7.280 [ 36s] [76/96] installing tzdata-2021e-5.1 [ 36s] [77/96] installing libdw-0.178-4.80 [ 37s] [78/96] installing libarchive-3.5.2-3.106 [ 37s] [79/96] installing libncurses-6.2-7.280 [ 37s] [80/96] installing glibc-devel-2.30-14.2 [ 37s] [81/96] installing less-466-3.4 [ 37s] [82/96] installing libreadline-5.2-3.212 [ 38s] [83/96] installing procps-ng-3.3.17-4.1 [ 38s] [84/96] installing automake-1.16.4-6.40 [ 38s] [85/96] installing libasm-0.178-4.80 [ 39s] [86/96] installing build-20120927-3.3 [ 39s] [87/96] installing gcc-9.2.0-16.2 [ 39s] [88/96] installing qemu-accel-x86_64-aarch64-0.4-10.1 [ 47s] [89/96] installing libtool-2.4.6-4.43 [ 47s] [90/96] installing elfutils-0.178-4.80 [ 47s] [91/96] installing util-linux-2.37.4-12.5 [ 47s] [92/96] installing util-linux-su-2.37.4-12.5 [ 47s] [93/96] installing nss-3.34.1-3.487 [ 48s] [94/96] installing libsoftokn3-3.34.1-3.487 [ 48s] [95/96] installing rpm-4.14.1.1-9.119 [ 48s] [96/96] installing rpm-build-4.14.1.1-9.119 [ 49s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 49s] now finalizing build dir... [ 49s] Running build time source services... [ 49s] build target is aarch64-tizen-linux [ 49s] ----------------------------------------------------------------- [ 49s] I have the following modifications for gperf.spec: [ 49s] 4c4 [ 49s] < Release: 1 [ 49s] --- [ 49s] > Release: 1.15 [ 49s] 49a50 [ 49s] > %changelog [ 49s] ----------------------------------------------------------------- [ 49s] ----- building gperf.spec (user abuild) [ 49s] ----------------------------------------------------------------- [ 49s] ----------------------------------------------------------------- [ 49s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/60a7f7cec43eadc7401bba931a9be213-gperf' -ba /home/abuild/rpmbuild/SOURCES/gperf.spec [ 49s] Building target platforms: aarch64-tizen-linux [ 49s] Building for target aarch64-tizen-linux [ 49s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.1Vedlk [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + rm -rf gperf-3.0.4 [ 49s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/gperf-3.0.4.tar.gz [ 49s] + /bin/tar -xof - [ 50s] + STATUS=0 [ 50s] + '[' 0 -ne 0 ']' [ 50s] + cd gperf-3.0.4 [ 50s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 50s] + cp /home/abuild/rpmbuild/SOURCES/gperf.manifest . [ 50s] + exit 0 [ 50s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SQLHGi [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd gperf-3.0.4 [ 50s] ++ uname -m [ 50s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 50s] + ref=/usr/lib/rpm [ 50s] + for s in guess sub [ 50s] ++ find -maxdepth 8 -name config.guess [ 50s] + for s in guess sub [ 50s] ++ find -maxdepth 8 -name config.sub [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 50s] + export CFLAGS [ 50s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 50s] + export CXXFLAGS [ 50s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 50s] + export FFLAGS [ 50s] + LDFLAGS= [ 50s] + export LDFLAGS [ 50s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 50s] + export CFLAGS [ 50s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 50s] + export CXXFLAGS [ 50s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 50s] + export FFLAGS [ 50s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 50s] checking whether make sets $(MAKE)... yes [ 50s] configure: creating ./config.status [ 50s] config.status: creating Makefile [ 50s] === configuring in lib (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib) [ 50s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 51s] checking whether make sets $(MAKE)... yes [ 51s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 51s] checking for C compiler default output file name... a.out [ 51s] checking whether the C compiler works... yes [ 51s] checking whether we are cross compiling... no [ 51s] checking for suffix of executables... [ 51s] checking for suffix of object files... o [ 51s] checking whether we are using the GNU C compiler... yes [ 51s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 51s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 51s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 51s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 51s] checking whether we are using the GNU C++ compiler... yes [ 51s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 51s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 51s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 51s] checking for ranlib... ranlib [ 51s] checking for a BSD compatible install... /bin/install -c [ 51s] configure: creating ./config.status [ 51s] config.status: creating Makefile [ 52s] === configuring in src (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src) [ 52s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 52s] checking whether make sets $(MAKE)... yes [ 52s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 52s] checking for C compiler default output file name... a.out [ 52s] checking whether the C compiler works... yes [ 52s] checking whether we are cross compiling... no [ 52s] checking for suffix of executables... [ 52s] checking for suffix of object files... o [ 52s] checking whether we are using the GNU C compiler... yes [ 52s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 52s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 52s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 52s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 52s] checking whether we are using the GNU C++ compiler... yes [ 52s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 52s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 52s] checking for a BSD compatible install... /bin/install -c [ 52s] checking for stack-allocated variable-size arrays... yes [ 52s] checking for rand in -lm... yes [ 52s] configure: creating ./config.status [ 53s] config.status: creating Makefile [ 53s] config.status: creating config.h [ 53s] === configuring in tests (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests) [ 53s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 53s] checking whether make sets $(MAKE)... yes [ 53s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 53s] checking for C compiler default output file name... a.out [ 53s] checking whether the C compiler works... yes [ 53s] checking whether we are cross compiling... no [ 53s] checking for suffix of executables... [ 53s] checking for suffix of object files... o [ 53s] checking whether we are using the GNU C compiler... yes [ 53s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 53s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 53s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 53s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 54s] checking whether we are using the GNU C++ compiler... yes [ 54s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 54s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 54s] configure: creating ./config.status [ 54s] config.status: creating Makefile [ 54s] === configuring in doc (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc) [ 54s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=aarch64-tizen-linux-gnu' '--host=aarch64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=aarch64-tizen-linux-gnu' 'host_alias=aarch64-tizen-linux-gnu' --cache-file=/dev/null --srcdir=. [ 54s] checking whether make sets $(MAKE)... yes [ 54s] checking for a BSD compatible install... /bin/install -c [ 54s] configure: creating ./config.status [ 55s] config.status: creating Makefile [ 55s] + make -j8 [ 55s] cd lib; make all [ 55s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 55s] aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -c ./getopt.c [ 55s] aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -c ./getopt1.c [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -c ./getline.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -c ./hash.cc [ 55s] rm -f libgp.a [ 55s] ar rc libgp.a getopt.o getopt1.o getline.o hash.o [ 55s] ranlib libgp.a [ 55s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 55s] cd src; make all [ 55s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./version.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./positions.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./options.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./keyword.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./keyword-list.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./input.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./bool-array.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./hash-table.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./search.cc [ 55s] In file included from ./keyword-list.h:78, [ 55s] from ./keyword-list.cc:22: [ 55s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 55s] ./keyword-list.icc:50:11: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 55s] 50 | return *reinterpret_cast(&_cdr); [ 55s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 55s] In file included from ./keyword-list.h:78, [ 55s] from ./input.h:28, [ 55s] from ./input.cc:22: [ 55s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 55s] ./keyword-list.icc:50:11: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 55s] 50 | return *reinterpret_cast(&_cdr); [ 55s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 55s] ./options.cc: In member function 'void Options::print_options() const': [ 55s] ./options.cc:282:27: warning: suggest parentheses around '&&' within '||' [-Wparentheses] [ 55s] 282 | if (*arg >= 'A' && *arg <= 'Z' || *arg >= 'a' && *arg <= 'z') [ 55s] | ~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 55s] ./options.cc:294:34: warning: suggest parentheses around '&&' within '||' [-Wparentheses] [ 55s] 294 | while (*arg >= 'A' && *arg <= 'Z' || *arg >= 'a' && *arg <= 'z' || *arg == '-'); [ 55s] | ~~~~~~~~~~~~^~~~~~~~~~~~~~ [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./output.cc [ 55s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I. -I./../lib -c ./main.cc [ 55s] In file included from ./keyword-list.h:78, [ 55s] from ./search.h:27, [ 55s] from ./search.cc:22: [ 55s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 55s] ./keyword-list.icc:50:11: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 55s] 50 | return *reinterpret_cast(&_cdr); [ 55s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 55s] In file included from ./keyword-list.h:78, [ 55s] from ./output.h:27, [ 55s] from ./output.cc:22: [ 55s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 55s] ./keyword-list.icc:50:11: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 55s] 50 | return *reinterpret_cast(&_cdr); [ 55s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 55s] In file included from ./keyword-list.h:78, [ 55s] from ./input.h:28, [ 55s] from ./main.cc:25: [ 55s] ./keyword-list.icc: In member function 'KeywordExt_List*& KeywordExt_List::rest()': [ 55s] ./keyword-list.icc:50:11: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 55s] 50 | return *reinterpret_cast(&_cdr); [ 55s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 55s] ./search.cc: In member function 'void Search::prepare()': [ 55s] ./search.cc:162:6: warning: suggest explicit braces to avoid ambiguous 'else' [-Wdangling-else] [ 55s] 162 | if (option[SEVENBIT]) [ 55s] | ^ [ 55s] ./search.cc: In member function 'void Search::find_positions()': [ 55s] ./search.cc:417:16: warning: suggest explicit braces to avoid ambiguous 'else' [-Wdangling-else] [ 55s] 417 | if (current.contains (i2) && !mandatory.contains (i2) && i2 != i1) [ 55s] | ^ [ 55s] ./search.cc:415:12: warning: suggest explicit braces to avoid ambiguous 'else' [-Wdangling-else] [ 55s] 415 | if (current.contains (i1) && !mandatory.contains (i1)) [ 55s] | ^ [ 55s] ./output.cc: In member function 'void Output::output_lookup_array() const': [ 55s] ./output.cc:1302:32: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long int' [-Wformat=] [ 55s] 1302 | "dup_ptr[%d]: hash_value = %d, index = %d, count = %d\n", [ 55s] | ~^ [ 55s] | | [ 55s] | int [ 55s] | %ld [ 55s] 1303 | dup_ptr - duplicates, [ 55s] | ~~~~~~~~~~~~~~~~~~~~ [ 55s] | | [ 55s] | long int [ 55s] ./search.cc: In member function 'void Search::optimize()': [ 55s] ./search.cc:1638:6: warning: suggest explicit braces to avoid ambiguous 'else' [-Wdangling-else] [ 55s] 1638 | if (_alpha_unify) [ 55s] | ^ [ 56s] aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o gperf version.o positions.o options.o keyword.o keyword-list.o input.o bool-array.o hash-table.o search.o output.o main.o ../lib/libgp.a -lm [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 56s] cd tests; make all [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 56s] make[1]: Nothing to be done for 'all'. [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 56s] cd doc; make all [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 56s] make[1]: Nothing to be done for 'all'. [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 56s] + exit 0 [ 56s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.dHUGVi [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd gperf-3.0.4 [ 56s] + LANG=C [ 56s] + export LANG [ 56s] + unset DISPLAY [ 56s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 [ 56s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 [ 56s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 install [ 56s] cd lib; /bin/make install [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 56s] make[1]: Nothing to be done for 'install'. [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 56s] cd src; /bin/make install [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 56s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/bin [ 56s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr [ 56s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/bin [ 56s] /bin/install -c gperf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/bin/gperf [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 56s] cd tests; /bin/make install [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 56s] make[1]: Nothing to be done for 'install'. [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 56s] cd doc; /bin/make install [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 56s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/info [ 56s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share [ 56s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/info [ 56s] /bin/install -c -m 644 ./gperf.info /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/info/gperf.info [ 56s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/man/man1 [ 56s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/man [ 56s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/man/man1 [ 56s] /bin/install -c -m 644 ./gperf.1 /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/man/man1/gperf.1 [ 56s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc/ [ 56s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc [ 56s] /bin/install -c -m 644 ./gperf.html /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc//gperf.html [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 56s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/info/dir [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 -regex '.*\.la$' [ 56s] + xargs rm -f -- [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 -regex '.*\.a$' [ 56s] + xargs rm -f -- [ 56s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc/gperf.html [ 56s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 3.0.4-1.15 --unique-debug-src-base gperf-3.0.4-1.15.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/gperf-3.0.4 [ 56s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/bin/gperf [ 56s] 588 blocks [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gperf-3.0.4/gperf-debuginfo.manifest [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gperf-3.0.4/gperf-debugsource.manifest [ 56s] + /usr/lib/rpm/check-buildroot [ 57s] + /usr/lib/rpm//brp-compress [ 57s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 57s] + /usr/lib/rpm/brp-python-hardlink [ 57s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 [ 57s] Processing files: gperf-3.0.4-1.15.aarch64 [ 57s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 57s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 57s] [ 57s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.09AAQk [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd gperf-3.0.4 [ 57s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc/packages/gperf [ 57s] + export LC_ALL=C [ 57s] + LC_ALL=C [ 57s] + export DOCDIR [ 57s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc/packages/gperf [ 57s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc/packages/gperf [ 57s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc/packages/gperf [ 57s] + cp -pr doc/gperf.html /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/doc/packages/gperf [ 57s] + exit 0 [ 57s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.EfVDLj [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd gperf-3.0.4 [ 57s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/licenses/gperf [ 57s] + export LC_ALL=C [ 57s] + LC_ALL=C [ 57s] + export LICENSEDIR [ 57s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/licenses/gperf [ 57s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64/usr/share/licenses/gperf [ 57s] + exit 0 [ 57s] Provides: gperf = 3.0.4-1.15 gperf(aarch-64) = 3.0.4-1.15 [ 57s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 57s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.29)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.8)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) [ 57s] Processing files: gperf-debugsource-3.0.4-1.15.aarch64 [ 57s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 57s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 57s] [ 57s] Provides: gperf-debugsource = 3.0.4-1.15 gperf-debugsource(aarch-64) = 3.0.4-1.15 [ 57s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 57s] Processing files: gperf-debuginfo-3.0.4-1.15.aarch64 [ 57s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 57s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 57s] [ 57s] Provides: gperf-debuginfo = 3.0.4-1.15 gperf-debuginfo(aarch-64) = 3.0.4-1.15 [ 57s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 57s] Recommends: gperf-debugsource(aarch-64) = 3.0.4-1.15 [ 57s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 [ 57s] Wrote: /home/abuild/rpmbuild/SRPMS/gperf-3.0.4-1.15.src.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gperf-3.0.4-1.15.aarch64.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gperf-debugsource-3.0.4-1.15.aarch64.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gperf-debuginfo-3.0.4-1.15.aarch64.rpm [ 57s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.OLl1gj [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd gperf-3.0.4 [ 57s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.15.aarch64 [ 57s] + exit 0 [ 57s] ... checking for files with abuild user/group [ 57s] ... creating baselibs [ 58s] [ 58s] obspw04 finished "build gperf.spec" at Fri May 6 05:23:32 UTC 2022. [ 58s] Retried build at Tue May 17 04:44:42 2022 returned same result, skipped