[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw30 started "build _service:gbs:hal-backend-device-common.spec" at Fri May 6 05:59:17 UTC 2022. [ 0s] [ 0s] Building hal-backend-device-common for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '8807eb88279e3eebaf3b6bd4ddd1b223' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-common.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-common.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-common.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 2s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libcap... [ 2s] [13/41] preinstalling libfreebl3... [ 2s] [14/41] preinstalling libgcc... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-aarch64 postinstall script [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] reordering...cycle: gio-branding-upstream -> libgio [ 11s] breaking dependency libgio -> gio-branding-upstream [ 11s] cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] [1/140] installing dlog-config-persistent-logs-7.0.3-127.3 [ 11s] [2/140] installing libmagic-data-5.41-6.304 [ 11s] [3/140] installing setup-0.9-6.8 [ 11s] [4/140] installing filesystem-3.1-4.1 [ 11s] [5/140] installing glibc-2.30-14.2 [ 12s] [6/140] installing bash-3.2.57-5.1 [ 12s] [7/140] installing capi-base-common-0.4.70-54.2 [ 12s] [8/140] installing cpio-2.8-5.3 [ 12s] [9/140] installing diffutils-3.3-4.3 [ 12s] [10/140] installing findutils-4.3.8-5.371 [ 12s] [11/140] installing gdbm-1.8.3-3.671 [ 13s] [12/140] installing hostname-3.23-3.3 [ 13s] [13/140] installing libatomic-9.2.0-16.2 [ 13s] [14/140] installing libattr-2.5.1-5.362 [ 13s] [15/140] installing libblkid-2.37.4-12.5 [ 14s] [16/140] installing libbz2-1.0.8-5.234 [ 14s] [17/140] installing libcap-2.24-4.357 [ 14s] [18/140] installing libexpat-2.4.1-4.312 [ 15s] [19/140] installing libext2fs-1.46.0-4.43 [ 15s] [20/140] installing libffi-3.3-5.382 [ 15s] [21/140] installing libfreebl3-3.34.1-3.487 [ 16s] [22/140] installing libgcc-9.2.0-16.2 [ 16s] [23/140] installing libgomp-9.2.0-16.2 [ 16s] [24/140] installing libitm-9.2.0-16.2 [ 17s] [25/140] installing libltdl-2.4.6-4.43 [ 17s] [26/140] installing liblua-5.1.5-3.334 [ 17s] [27/140] installing liblzma-5.2.5-5.298 [ 18s] [28/140] installing libopenssl11-1.1.1l-6.217 [ 18s] [29/140] installing libpcre-8.45-5.6 [ 19s] [30/140] installing libpopt-1.16-3.620 [ 19s] [31/140] installing libpython3_91_0-3.9.10-11.10 [ 19s] [32/140] installing libsmack-1.3.1-4.348 [ 20s] [33/140] installing libsmartcols-2.37.4-12.5 [ 20s] [34/140] installing libsqlite-3.37.2-5.34 [ 20s] [35/140] installing libuuid-2.37.4-12.5 [ 21s] [36/140] installing libzstd1-1.4.5-2.198 [ 21s] [37/140] installing m4-1.4.19-4.1 [ 21s] [38/140] installing net-tools-2.0_20121208git-4.4 [ 21s] [39/140] installing nspr-4.12-3.613 [ 21s] [40/140] installing patch-2.7.6-8.11 [ 22s] [41/140] installing pkg-config-0.29.2-4.29 [ 22s] [42/140] installing sed-4.1c-4.2 [ 22s] [43/140] installing update-alternatives-1.20.5-3.4 [ 22s] [44/140] installing which-2.17-4.4 [ 22s] [45/140] installing zlib-1.2.11-3.650 [ 22s] [46/140] installing shadow-utils-4.1.4.2-3.46 [ 22s] [47/140] installing build-compare-2015.04.28-3.228 [ 22s] [48/140] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 25s] [49/140] installing terminfo-base-full-6.2-7.280 [ 26s] [50/140] installing capi-base-common-devel-0.4.70-54.2 [ 26s] [51/140] installing coreutils-6.9-5.128 [ 26s] [52/140] installing cpp-9.2.0-16.2 [ 27s] [53/140] installing gawk-3.1.5-4.4 [ 27s] [54/140] installing gcc-c++-9.2.0-16.2 [ 28s] [55/140] installing grep-2.5.2-3.4 [ 28s] [56/140] installing libacl-2.2.53-4.575 [ 28s] [57/140] installing libblkid-devel-2.37.4-12.5 [ 28s] [58/140] installing libelf-0.178-4.80 [ 28s] [59/140] installing libffi-devel-3.3-5.382 [ 28s] [60/140] installing libgfortran-9.2.0-16.2 [ 29s] [61/140] installing libglib-2.70.0-33.85 [ 29s] [62/140] installing libmount-2.37.4-12.5 [ 29s] [63/140] installing libpcreposix-8.45-5.6 [ 30s] [64/140] installing libstdc++-9.2.0-16.2 [ 30s] [65/140] installing make-4.3-3.13 [ 30s] [66/140] installing nss-certs-3.34.1-3.487 [ 30s] [67/140] installing smack-1.3.1-4.348 [ 31s] [68/140] installing bzip2-1.0.8-5.234 [ 31s] [69/140] installing libfdisk-2.37.4-12.5 [ 31s] [70/140] installing libmagic-5.41-6.304 [ 31s] [71/140] installing libxml2-2.9.12-7.154 [ 32s] [72/140] installing perl-5.34.0-7.23 [ 34s] [73/140] installing xz-5.2.5-5.298 [ 34s] [74/140] installing libkmod-29-2.4 [ 35s] [75/140] installing build-mkbaselibs-20120927-3.3 [ 35s] [76/140] installing libstdc++-devel-9.2.0-16.2 [ 35s] [77/140] installing acl-2.2.53-4.575 [ 35s] [78/140] installing file-5.41-6.304 [ 35s] [79/140] installing libgmodule-2.70.0-33.85 [ 36s] [80/140] installing libgthread-2.70.0-33.85 [ 36s] [81/140] installing linux-glibc-devel-3.10-4.478 [ 36s] [82/140] installing tar-1.17-3.3 [ 36s] [83/140] installing autoconf-2.71-6.44 [ 37s] [84/140] installing binutils-2.33.1-9.252 [ 37s] [85/140] installing glibc-locale-2.30-14.2 [ 38s] [86/140] installing gzip-1.3.12-3.626 [ 38s] [87/140] installing libcc1-9.2.0-16.2 [ 38s] [88/140] installing libconfig-1.6-5.2 [ 39s] [89/140] installing libgobject-2.70.0-33.85 [ 39s] [90/140] installing libmount-devel-2.37.4-12.5 [ 39s] [91/140] installing libubsan-9.2.0-16.2 [ 39s] [92/140] installing pam-1.1.6-4.2 [ 40s] [93/140] installing libncurses6-6.2-7.280 [ 40s] [94/140] installing libpcrecpp-8.45-5.6 [ 41s] [95/140] installing tzdata-2021e-5.1 [ 41s] [96/140] installing dlog-7.0.3-127.3 [ 41s] [97/140] installing libdw-0.178-4.80 [ 42s] [98/140] installing libarchive-3.5.2-3.106 [ 42s] [99/140] installing shared-mime-info-1.7-5.24 [ 46s] [100/140] installing libncurses-6.2-7.280 [ 46s] [101/140] installing dlog-logger-7.0.3-127.3 [ 46s] [102/140] installing glibc-devel-2.30-14.2 [ 46s] [103/140] installing less-466-3.4 [ 46s] [104/140] installing libconfig-devel-1.6-5.2 [ 46s] [105/140] installing libreadline-5.2-3.212 [ 46s] [106/140] installing libusbgx-0.1.0-5.2 [ 47s] [107/140] installing procps-ng-3.3.17-4.1 [ 47s] [108/140] installing automake-1.16.4-6.40 [ 47s] [109/140] installing libasm-0.178-4.80 [ 47s] [110/140] installing build-20120927-3.3 [ 47s] [111/140] installing libsystemd-244-94.2 [ 48s] [112/140] installing pcre-devel-8.45-5.6 [ 48s] [113/140] installing cmake-3.21.3-6.10 [ 49s] [114/140] installing gcc-9.2.0-16.2 [ 51s] [115/140] installing qemu-accel-x86_64-aarch64-0.4-10.1 [ 58s] [116/140] installing libusbgx-devel-0.1.0-5.2 [ 58s] [117/140] installing zlib-devel-1.2.11-3.650 [ 58s] [118/140] installing libtool-2.4.6-4.43 [ 58s] [119/140] installing elfutils-0.178-4.80 [ 58s] [120/140] installing libdlog-7.0.3-127.3 [ 59s] [121/140] installing python3-base-3.9.10-11.10 [ 60s] [122/140] installing util-linux-2.37.4-12.5 [ 60s] [123/140] installing python3-3.9.10-11.9 [ 60s] [124/140] installing libdlog-devel-7.0.3-127.3 [ 60s] [125/140] installing util-linux-su-2.37.4-12.5 [ 60s] [126/140] installing systemd-244-94.2 [ 62s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 62s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 62s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 62s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 62s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 62s] [127/140] installing systemd-devel-244-94.2 [ 62s] [128/140] installing nss-3.34.1-3.487 [ 63s] [129/140] installing libgio-2.70.0-33.85 [ 63s] [130/140] installing gio-branding-upstream-2.70.0-33.85 [ 63s] [131/140] installing libsoftokn3-3.34.1-3.487 [ 63s] [132/140] installing glib2-tools-2.70.0-33.85 [ 63s] [133/140] installing hal-api-common-0.0.1-33.2 [ 63s] [134/140] installing libsyscommon-4.1-44.2 [ 64s] [135/140] installing rpm-4.14.1.1-9.119 [ 64s] [136/140] installing hal-api-device-1.0.0-15.2 [ 65s] [137/140] installing glib2-devel-2.70.0-33.85 [ 65s] [138/140] installing rpm-build-4.14.1.1-9.119 [ 65s] [139/140] installing hal-api-device-devel-1.0.0-15.2 [ 65s] [140/140] installing libsyscommon-devel-4.1-44.2 [ 65s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 65s] now finalizing build dir... [ 65s] Running build time source services... [ 66s] build target is aarch64-tizen-linux [ 66s] ----------------------------------------------------------------- [ 66s] I have the following modifications for hal-backend-device-common.spec: [ 66s] 5c5 [ 66s] < Release: 1 [ 66s] --- [ 66s] > Release: 8.2 [ 66s] ----------------------------------------------------------------- [ 66s] ----- building hal-backend-device-common.spec (user abuild) [ 66s] ----------------------------------------------------------------- [ 66s] ----------------------------------------------------------------- [ 66s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/8807eb88279e3eebaf3b6bd4ddd1b223-hal-backend-device-common' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-common.spec [ 66s] Building target platforms: aarch64-tizen-linux [ 66s] Building for target aarch64-tizen-linux [ 66s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pA8Z6I [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + rm -rf hal-backend-device-common-1 [ 66s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-common-1.tar.gz [ 66s] + /bin/tar -xof - [ 66s] + STATUS=0 [ 66s] + '[' 0 -ne 0 ']' [ 66s] + cd hal-backend-device-common-1 [ 66s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 66s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-common.manifest . [ 66s] + exit 0 [ 66s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.hpM6SF [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd hal-backend-device-common-1 [ 66s] ++ uname -m [ 66s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 66s] + ref=/usr/lib/rpm [ 66s] + for s in guess sub [ 66s] ++ find -maxdepth 8 -name config.guess [ 66s] + for s in guess sub [ 66s] ++ find -maxdepth 8 -name config.sub [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + LDFLAGS= [ 66s] + export LDFLAGS [ 66s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DHAL_LIB_DIR=/hal/lib64 -DHAL_INCLUDE_DIR=/hal/include -DHAL_LICENSE_DIR=/hal/share/licenses -DENABLE_DLOG=on [ 66s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 66s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 66s] CMake. [ 66s] [ 66s] Update the VERSION argument value or use a ... suffix to tell [ 66s] CMake that the project does not need compatibility with older versions. [ 66s] [ 66s] [ 66s] -- The C compiler identification is GNU 9.2.0 [ 66s] -- Detecting C compiler ABI info [ 66s] -- Detecting C compiler ABI info - done [ 66s] -- Check for working C compiler: /bin/cc - skipped [ 66s] -- Detecting C compile features [ 66s] -- Detecting C compile features - done [ 66s] -- Found PkgConfig: /bin/pkg-config (found version "0.29.2") [ 66s] -- Checking for modules 'libusbgx;libsyscommon;dlog;libudev' [ 66s] -- Found libusbgx, version 0.1.0 [ 67s] -- Found libsyscommon, version 4.1 [ 67s] -- Found dlog, version 1.0 [ 67s] -- Found libudev, version 244 [ 67s] -- Configuring done [ 67s] -- Generating done [ 67s] CMake Warning: [ 67s] Manually-specified variables were not used by the project: [ 67s] [ 67s] CMAKE_INSTALL_LIBDIR [ 67s] INCLUDE_INSTALL_DIR [ 67s] LIB_SUFFIX [ 67s] SHARE_INSTALL_PREFIX [ 67s] SYSCONF_INSTALL_DIR [ 67s] [ 67s] [ 67s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 [ 67s] + make -j8 [ 67s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 67s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1//CMakeFiles/progress.marks [ 67s] make -f CMakeFiles/Makefile2 all [ 67s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 67s] make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/depend [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 67s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/hal-backend-device-common.dir/DependInfo.cmake --color= [ 67s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 67s] make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/build [ 67s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 67s] [ 20%] Building C object CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_gadget_common.c.o [ 67s] [ 40%] Building C object CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_client_common.c.o [ 67s] /bin/cc -DFEATURE_DLOG -D_GNU_SOURCE -Dhal_backend_device_common_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -fPIC -MD -MT CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_gadget_common.c.o -MF CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_gadget_common.c.o.d -o CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_gadget_common.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/src/usb_gadget/usb_gadget_common.c [ 67s] /bin/cc -DFEATURE_DLOG -D_GNU_SOURCE -Dhal_backend_device_common_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -fPIC -MD -MT CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_client_common.c.o -MF CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_client_common.c.o.d -o CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_client_common.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/src/usb_gadget/usb_client_common.c [ 67s] [ 60%] Building C object CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_cfs_client_common.c.o [ 67s] [ 80%] Building C object CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o [ 67s] /bin/cc -DFEATURE_DLOG -D_GNU_SOURCE -Dhal_backend_device_common_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -fPIC -MD -MT CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_cfs_client_common.c.o -MF CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_cfs_client_common.c.o.d -o CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_cfs_client_common.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/src/usb_gadget/usb_cfs_client_common.c [ 67s] /bin/cc -DFEATURE_DLOG -D_GNU_SOURCE -Dhal_backend_device_common_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -fPIC -MD -MT CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o -MF CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o.d -o CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/src/udev/udev.c [ 68s] [100%] Linking C shared library libhal-backend-device-common.so [ 68s] /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-common.dir/link.txt --verbose=1 [ 68s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -shared -Wl,-soname,libhal-backend-device-common.so -o libhal-backend-device-common.so CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_gadget_common.c.o CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_client_common.c.o CMakeFiles/hal-backend-device-common.dir/src/usb_gadget/usb_cfs_client_common.c.o CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o -lusbgx -lconfig -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ldlog -ludev -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ludev [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] [100%] Built target hal-backend-device-common [ 68s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles 0 [ 68s] + exit 0 [ 68s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.CnoujI [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd hal-backend-device-common-1 [ 68s] + LANG=C [ 68s] + export LANG [ 68s] + unset DISPLAY [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 [ 68s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 [ 68s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 install [ 68s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 68s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1//CMakeFiles/progress.marks [ 68s] /bin/make -f CMakeFiles/Makefile2 all [ 68s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] /bin/make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/depend [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/hal-backend-device-common.dir/DependInfo.cmake --color= [ 68s] Consolidate compiler generated dependencies of target hal-backend-device-common [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] /bin/make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/build [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] make[2]: Nothing to be done for 'CMakeFiles/hal-backend-device-common.dir/build'. [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] [100%] Built target hal-backend-device-common [ 68s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles 0 [ 68s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 68s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] make[1]: Nothing to be done for 'preinstall'. [ 68s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 68s] Install the project... [ 68s] /usr/bin/cmake -P cmake_install.cmake [ 68s] -- Install configuration: "" [ 68s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/hal/lib64/libhal-backend-device-common.so [ 68s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/hal/share/licenses/hal-backend-device-common/LICENSE.Apache-2.0 [ 68s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/hal/include/device/hal-backend-common-usb_gadget.h [ 68s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/hal/include/device/hal-backend-common.h [ 68s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/hal/include/device/hal-backend-common-udev.h [ 68s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/usr/lib64/pkgconfig/hal-backend-device-common.pc [ 68s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/usr/share/info/dir [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 -regex '.*\.la$' [ 68s] + xargs rm -f -- [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 -regex '.*\.a$' [ 68s] + xargs rm -f -- [ 68s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1-8.2 --unique-debug-src-base hal-backend-device-common-1-8.2.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 [ 68s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64/hal/lib64/libhal-backend-device-common.so [ 68s] 89 blocks [ 68s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/hal-backend-device-common-debuginfo.manifest [ 68s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/hal-backend-device-common-debugsource.manifest [ 68s] + /usr/lib/rpm/check-buildroot [ 68s] + /usr/lib/rpm//brp-compress [ 68s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 68s] + /usr/lib/rpm/brp-python-hardlink [ 68s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 [ 68s] Processing files: hal-backend-device-common-1-8.2.aarch64 [ 68s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 68s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 68s] [ 69s] Provides: hal-backend-device-common = 1-8.2 hal-backend-device-common(aarch-64) = 1-8.2 libhal-backend-device-common.so()(64bit) [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdlog.so.0()(64bit) libglib-2.0.so.0()(64bit) libsyscommon.so.4.1()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) libusbgx.so.1()(64bit) [ 69s] Processing files: hal-backend-device-common-debugsource-1-8.2.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: hal-backend-device-common-debugsource = 1-8.2 hal-backend-device-common-debugsource(aarch-64) = 1-8.2 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Processing files: hal-backend-device-common-devel-1-8.2.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: hal-backend-device-common-devel = 1-8.2 hal-backend-device-common-devel(aarch-64) = 1-8.2 pkgconfig(hal-backend-device-common) = 1.1 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Requires: /usr/bin/pkg-config pkgconfig(dlog) pkgconfig(libudev) [ 69s] Processing files: hal-backend-device-common-debuginfo-1-8.2.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: hal-backend-device-common-debuginfo = 1-8.2 hal-backend-device-common-debuginfo(aarch-64) = 1-8.2 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Recommends: hal-backend-device-common-debugsource(aarch-64) = 1-8.2 [ 69s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 [ 69s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-common-1-8.2.src.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-1-8.2.aarch64.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-debugsource-1-8.2.aarch64.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-devel-1-8.2.aarch64.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-debuginfo-1-8.2.aarch64.rpm [ 69s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.b0kLrI [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd hal-backend-device-common-1 [ 69s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-8.2.aarch64 [ 69s] + exit 0 [ 69s] ... checking for files with abuild user/group [ 69s] ... creating baselibs [ 70s] [ 70s] obspw30 finished "build hal-backend-device-common.spec" at Fri May 6 06:00:27 UTC 2022. [ 70s] Retried build at Tue May 17 05:49:46 2022 returned same result, skipped