[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw20 started "build _service:gbs:python-pycurl.spec" at Fri May 6 05:24:31 UTC 2022. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '36fe7d4dc38bb3e63fec5000957778f7' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 2s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libcap... [ 2s] [13/41] preinstalling libfreebl3... [ 2s] [14/41] preinstalling libgcc... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-aarch64 postinstall script [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] [1/111] installing boost-license-1.77.0-8.2 [ 11s] [2/111] installing libmagic-data-5.41-6.304 [ 11s] [3/111] installing setup-0.9-6.8 [ 11s] [4/111] installing filesystem-3.1-4.1 [ 11s] [5/111] installing glibc-2.30-14.2 [ 12s] [6/111] installing bash-3.2.57-5.1 [ 12s] [7/111] installing cpio-2.8-5.3 [ 12s] [8/111] installing diffutils-3.3-4.3 [ 12s] [9/111] installing findutils-4.3.8-5.371 [ 12s] [10/111] installing gdbm-1.8.3-3.671 [ 12s] [11/111] installing hostname-3.23-3.3 [ 12s] [12/111] installing libatomic-9.2.0-16.2 [ 13s] [13/111] installing libattr-2.5.1-5.362 [ 13s] [14/111] installing libblkid-2.37.4-12.5 [ 13s] [15/111] installing libbz2-1.0.8-5.234 [ 14s] [16/111] installing libcap-2.24-4.357 [ 14s] [17/111] installing libcares-1.18.1-8.1 [ 14s] [18/111] installing libext2fs-1.46.0-4.43 [ 15s] [19/111] installing libfreebl3-3.34.1-3.487 [ 15s] [20/111] installing libgcc-9.2.0-16.2 [ 15s] [21/111] installing libgomp-9.2.0-16.2 [ 16s] [22/111] installing libitm-9.2.0-16.2 [ 16s] [23/111] installing libltdl-2.4.6-4.43 [ 16s] [24/111] installing liblua-5.1.5-3.334 [ 17s] [25/111] installing liblzma-5.2.5-5.298 [ 17s] [26/111] installing libopenssl11-1.1.1l-6.217 [ 18s] [27/111] installing libpcre-8.45-5.6 [ 18s] [28/111] installing libpopt-1.16-3.620 [ 18s] [29/111] installing libpython-2.7.18-5.108 [ 19s] [30/111] installing libsmack-1.3.1-4.348 [ 19s] [31/111] installing libsmartcols-2.37.4-12.5 [ 19s] [32/111] installing libsqlite-3.37.2-5.34 [ 20s] [33/111] installing libuuid-2.37.4-12.5 [ 20s] [34/111] installing libzstd1-1.4.5-2.198 [ 21s] [35/111] installing m4-1.4.19-4.1 [ 21s] [36/111] installing net-tools-2.0_20121208git-4.4 [ 21s] [37/111] installing nspr-4.12-3.613 [ 21s] [38/111] installing patch-2.7.6-8.11 [ 21s] [39/111] installing pkg-config-0.29.2-4.29 [ 21s] [40/111] installing sed-4.1c-4.2 [ 21s] [41/111] installing update-alternatives-1.20.5-3.4 [ 21s] [42/111] installing which-2.17-4.4 [ 21s] [43/111] installing zlib-1.2.11-3.650 [ 22s] [44/111] installing build-compare-2015.04.28-3.228 [ 22s] [45/111] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 25s] [46/111] installing terminfo-base-full-6.2-7.280 [ 25s] [47/111] installing coreutils-6.9-5.128 [ 26s] [48/111] installing cpp-9.2.0-16.2 [ 26s] [49/111] installing gawk-3.1.5-4.4 [ 27s] [50/111] installing gcc-c++-9.2.0-16.2 [ 27s] [51/111] installing grep-2.5.2-3.4 [ 27s] [52/111] installing libacl-2.2.53-4.575 [ 28s] [53/111] installing libelf-0.178-4.80 [ 28s] [54/111] installing libgfortran-9.2.0-16.2 [ 29s] [55/111] installing libmount-2.37.4-12.5 [ 29s] [56/111] installing libstdc++-9.2.0-16.2 [ 29s] [57/111] installing make-4.3-3.13 [ 30s] [58/111] installing nss-certs-3.34.1-3.487 [ 30s] [59/111] installing smack-1.3.1-4.348 [ 30s] [60/111] installing bzip2-1.0.8-5.234 [ 30s] [61/111] installing libfdisk-2.37.4-12.5 [ 30s] [62/111] installing libmagic-5.41-6.304 [ 31s] [63/111] installing libxml2-2.9.12-7.154 [ 31s] [64/111] installing perl-5.34.0-7.23 [ 34s] [65/111] installing xz-5.2.5-5.298 [ 34s] [66/111] installing build-mkbaselibs-20120927-3.3 [ 34s] [67/111] installing libstdc++-devel-9.2.0-16.2 [ 34s] [68/111] installing file-5.41-6.304 [ 34s] [69/111] installing linux-glibc-devel-3.10-4.478 [ 35s] [70/111] installing tar-1.17-3.3 [ 35s] [71/111] installing autoconf-2.71-6.44 [ 36s] [72/111] installing binutils-2.33.1-9.252 [ 36s] [73/111] installing db4-4.8.30.NC-3.608 [ 37s] [74/111] installing glibc-locale-2.30-14.2 [ 37s] [75/111] installing gzip-1.3.12-3.626 [ 37s] [76/111] installing libcc1-9.2.0-16.2 [ 38s] [77/111] installing libubsan-9.2.0-16.2 [ 38s] [78/111] installing pam-1.1.6-4.2 [ 39s] [79/111] installing boost-system-1.77.0-8.2 [ 39s] [80/111] installing boost-thread-1.77.0-8.2 [ 39s] [81/111] installing libicu-70.1-24.2 [ 41s] [82/111] installing libncurses6-6.2-7.280 [ 41s] [83/111] installing tzdata-2021e-5.1 [ 42s] [84/111] installing libdw-0.178-4.80 [ 42s] [85/111] installing libarchive-3.5.2-3.106 [ 42s] [86/111] installing libncurses-6.2-7.280 [ 42s] [87/111] installing glibc-devel-2.30-14.2 [ 42s] [88/111] installing less-466-3.4 [ 42s] [89/111] installing libreadline-5.2-3.212 [ 43s] [90/111] installing procps-ng-3.3.17-4.1 [ 43s] [91/111] installing automake-1.16.4-6.40 [ 44s] [92/111] installing libasm-0.178-4.80 [ 44s] [93/111] installing build-20120927-3.3 [ 44s] [94/111] installing nghttp2-1.46.0-17.1 [ 44s] [95/111] installing gcc-9.2.0-16.2 [ 45s] [96/111] installing qemu-accel-x86_64-aarch64-0.4-10.1 [ 53s] [97/111] installing libcares-devel-1.18.1-8.1 [ 53s] [98/111] installing zlib-devel-1.2.11-3.650 [ 53s] [99/111] installing libtool-2.4.6-4.43 [ 53s] [100/111] installing elfutils-0.178-4.80 [ 53s] [101/111] installing libcurl-7.81.0-32.1 [ 53s] [102/111] installing python-2.7.18-5.108 [ 54s] [103/111] installing util-linux-2.37.4-12.5 [ 55s] [104/111] installing libcurl-devel-7.81.0-32.1 [ 55s] [105/111] installing libopenssl1.1-devel-1.1.1l-6.217 [ 55s] [106/111] installing util-linux-su-2.37.4-12.5 [ 55s] [107/111] installing python-devel-2.7.18-5.108 [ 55s] [108/111] installing nss-3.34.1-3.487 [ 56s] [109/111] installing libsoftokn3-3.34.1-3.487 [ 56s] [110/111] installing rpm-4.14.1.1-9.119 [ 57s] [111/111] installing rpm-build-4.14.1.1-9.119 [ 57s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 57s] now finalizing build dir... [ 57s] Running build time source services... [ 57s] Warning: spec file parser line 59: can't expand %(...) [ 57s] Warning: spec file parser line 60: can't expand %(...) [ 58s] build target is aarch64-tizen-linux [ 58s] ----------------------------------------------------------------- [ 58s] I have the following modifications for python-pycurl.spec: [ 58s] 6c6 [ 58s] < Release: 0 [ 58s] --- [ 58s] > Release: 2.13 [ 58s] 60a61 [ 58s] > %changelog [ 58s] ----------------------------------------------------------------- [ 58s] ----- building python-pycurl.spec (user abuild) [ 58s] ----------------------------------------------------------------- [ 58s] ----------------------------------------------------------------- [ 58s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/36fe7d4dc38bb3e63fec5000957778f7-python-pycurl' -ba /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 58s] Building target platforms: aarch64-tizen-linux [ 58s] Building for target aarch64-tizen-linux [ 58s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.CbjFwT [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + rm -rf pycurl-7.19.0 [ 58s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pycurl-7.19.0.tar.gz [ 58s] + /bin/tar -xof - [ 58s] + STATUS=0 [ 58s] + '[' 0 -ne 0 ']' [ 58s] + cd pycurl-7.19.0 [ 58s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 58s] + echo 'Patch #0 (0001-Don-t-build-static-libs.patch):' [ 58s] Patch #0 (0001-Don-t-build-static-libs.patch): [ 58s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 58s] patching file setup.py [ 58s] + echo 'Patch #1 (0002-Link-with-libcrypto.patch):' [ 58s] Patch #1 (0002-Link-with-libcrypto.patch): [ 58s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 58s] patching file setup.py [ 58s] + echo 'Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch):' [ 58s] Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch): [ 58s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 58s] patching file src/pycurl.c [ 58s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 58s] + exit 0 [ 58s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.heN1VR [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd pycurl-7.19.0 [ 58s] ++ uname -m [ 58s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 58s] + ref=/usr/lib/rpm [ 58s] + for s in guess sub [ 58s] ++ find -maxdepth 8 -name config.guess [ 58s] + for s in guess sub [ 58s] ++ find -maxdepth 8 -name config.sub [ 58s] + LANG=C [ 58s] + export LANG [ 58s] + unset DISPLAY [ 58s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 58s] + export CFLAGS [ 58s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 58s] + export CXXFLAGS [ 58s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 58s] + export FFLAGS [ 58s] + LDFLAGS= [ 58s] + export LDFLAGS [ 58s] + cp /home/abuild/rpmbuild/SOURCES/python-pycurl.manifest . [ 58s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL' [ 58s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL' [ 58s] + python setup.py build [ 59s] Using curl-config (libcurl 7.81.0) [ 59s] running build [ 59s] running build_py [ 59s] creating build [ 59s] creating build/lib.linux-aarch64-2.7 [ 59s] creating build/lib.linux-aarch64-2.7/curl [ 59s] copying python/curl/__init__.py -> build/lib.linux-aarch64-2.7/curl [ 59s] running build_ext [ 59s] building 'pycurl' extension [ 59s] creating build/temp.linux-aarch64-2.7 [ 59s] creating build/temp.linux-aarch64-2.7/src [ 59s] aarch64-tizen-linux-gnu-gcc -pthread -fno-strict-aliasing -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DNCURSES_INTERNALS -DNDEBUG -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-aarch64-2.7/src/pycurl.o [ 59s] src/pycurl.c: In function 'multi_socket_callback': [ 59s] src/pycurl.c:2351:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 59s] 2351 | int ret; [ 59s] | ^~~ [ 59s] src/pycurl.c: In function 'initpycurl': [ 59s] src/pycurl.c:3455:31: warning: passing argument 3 of 'insstr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 59s] 3455 | insstr(d, "COMPILE_DATE", COMPILE_DATE); [ 59s] | ^~~~~~~~~~~~ [ 59s] src/pycurl.c:3379:39: note: expected 'char *' but argument is of type 'const char *' [ 59s] 3379 | insstr(PyObject *d, char *name, char *value) [ 59s] | ~~~~~~^~~~~ [ 59s] At top level: [ 59s] src/pycurl.c:400:22: warning: 'pycurl_ssl_id' defined but not used [-Wunused-function] [ 59s] 400 | static unsigned long pycurl_ssl_id(void) [ 59s] | ^~~~~~~~~~~~~ [ 59s] src/pycurl.c:391:13: warning: 'pycurl_ssl_lock' defined but not used [-Wunused-function] [ 59s] 391 | static void pycurl_ssl_lock(int mode, int n, const char * file, int line) [ 59s] | ^~~~~~~~~~~~~~~ [ 60s] aarch64-tizen-linux-gnu-gcc -pthread -shared -Wl,-z,relro -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL build/temp.linux-aarch64-2.7/src/pycurl.o -L/usr/lib64 -lcurl -lcrypto -lpython2.7 -o build/lib.linux-aarch64-2.7/pycurl.so [ 60s] + exit 0 [ 60s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.bSB16Q [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd pycurl-7.19.0 [ 60s] + LANG=C [ 60s] + export LANG [ 60s] + unset DISPLAY [ 60s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 [ 60s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 [ 60s] + python setup.py install -O1 --skip-build --root=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 --prefix=/usr [ 61s] Using curl-config (libcurl 7.81.0) [ 61s] running install [ 61s] running install_lib [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64 [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7 [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7/site-packages [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7/site-packages/curl [ 61s] copying build/lib.linux-aarch64-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7/site-packages/curl [ 61s] copying build/lib.linux-aarch64-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7/site-packages [ 61s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 61s] writing byte-compilation script '/tmp/tmpnZqhrn.py' [ 61s] /bin/python -O /tmp/tmpnZqhrn.py [ 61s] removing /tmp/tmpnZqhrn.py [ 61s] running install_data [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl [ 61s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl [ 61s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl [ 61s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl [ 61s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl [ 61s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl [ 61s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/html [ 61s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/html [ 61s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/html [ 61s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/html [ 61s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/html [ 61s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/html [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/examples [ 61s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/pycurl/tests [ 61s] running install_egg_info [ 61s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/info [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/packages [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/python-pycurl [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc/python-pycurl-7.19.0 [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/gtk-doc [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/doc [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/man [ 61s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 -regex '.*/man/man./.*.[0-9]' [ 61s] + xargs rm -f -- [ 61s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 61s] + xargs rm -f -- [ 61s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 61s] + xargs rm -f -- [ 61s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 7.19.0-2.13 --unique-debug-src-base python-pycurl-7.19.0-2.13.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/pycurl-7.19.0 [ 61s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/lib64/python2.7/site-packages/pycurl.so [ 61s] 246 blocks [ 61s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debuginfo.manifest [ 61s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debugsource.manifest [ 61s] + /usr/lib/rpm/check-buildroot [ 61s] + /usr/lib/rpm//brp-compress [ 61s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 61s] + /usr/lib/rpm/brp-python-hardlink [ 61s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 [ 62s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.rvdopV [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd pycurl-7.19.0 [ 62s] + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 62s] + PYTHONPATH='/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 62s] + python tests/test_internals.py -q [ 62s] gc: collectable [ 62s] gc: collectable [ 62s] gc: collectable [ 62s] gc: collectable [ 62s] Python 2.7.18 (default, Apr 19 2022, 02:31:59) [ 62s] [GCC 9.2.0] [ 62s] PycURL libcurl/7.81.0 OpenSSL/1.1.1l zlib/1.2.11 c-ares/1.18.1 nghttp2/1.46.0 (compiled against 0x75100) [ 62s] PycURL version info (9, '7.81.0', 479488, 'aarch64-tizen-linux-gnu', 287957725, 'OpenSSL/1.1.1l', 0, '1.2.11', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'gophers', 'http', 'https', 'imap', 'imaps', 'mqtt', 'pop3', 'pop3s', 'rtsp', 'smb', 'smbs', 'smtp', 'smtps', 'telnet', 'tftp'), '1.18.1', 70145, None) [ 62s] build/lib.linux-aarch64-2.7/pycurl.so, compiled May 6 2022 05:25:30 [ 62s] All tests passed. [ 62s] + exit 0 [ 62s] Processing files: python-pycurl-7.19.0-2.13.aarch64 [ 62s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 62s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 62s] [ 62s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 62s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 62s] [ 62s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.sgqztR [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd pycurl-7.19.0 [ 62s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/licenses/python-pycurl [ 62s] + export LC_ALL=C [ 62s] + LC_ALL=C [ 62s] + export LICENSEDIR [ 62s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/licenses/python-pycurl [ 62s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64/usr/share/licenses/python-pycurl [ 62s] + exit 0 [ 62s] Provides: pycurl = 7.19.0-2.13 python-pycurl = 7.19.0-2.13 python-pycurl(aarch-64) = 7.19.0-2.13 [ 62s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 62s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcurl.so.4()(64bit) libcurl.so.4(CURL_OPENSSL_4)(64bit) libpython2.7.so.1.0()(64bit) python(abi) = 2.7 [ 62s] Processing files: python-pycurl-debugsource-7.19.0-2.13.aarch64 [ 62s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 62s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 62s] [ 62s] Provides: python-pycurl-debugsource = 7.19.0-2.13 python-pycurl-debugsource(aarch-64) = 7.19.0-2.13 [ 62s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 62s] Processing files: python-pycurl-debuginfo-7.19.0-2.13.aarch64 [ 62s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 62s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 62s] [ 62s] Provides: python-pycurl-debuginfo = 7.19.0-2.13 python-pycurl-debuginfo(aarch-64) = 7.19.0-2.13 [ 62s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 62s] Recommends: python-pycurl-debugsource(aarch-64) = 7.19.0-2.13 [ 62s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 [ 62s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-2.13.src.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python-pycurl-7.19.0-2.13.aarch64.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python-pycurl-debugsource-7.19.0-2.13.aarch64.rpm [ 62s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python-pycurl-debuginfo-7.19.0-2.13.aarch64.rpm [ 62s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.0p0qNT [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd pycurl-7.19.0 [ 62s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.13.aarch64 [ 62s] + exit 0 [ 62s] ... checking for files with abuild user/group [ 62s] ... creating baselibs [ 63s] [ 63s] obspw20 finished "build python-pycurl.spec" at Fri May 6 05:25:34 UTC 2022. [ 63s] Retried build at Tue May 17 05:37:07 2022 returned same result, skipped