[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw08 started "build _service:gbs:sshfs.spec" at Fri May 6 05:51:24 UTC 2022. [ 0s] [ 0s] Building sshfs for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '49aab069b5f69f27293e7d626650b273' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:sshfs.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:sshfs.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:sshfs.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling bash... [ 2s] [7/41] preinstalling diffutils... [ 2s] [8/41] preinstalling grep... [ 2s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libcap... [ 2s] [13/41] preinstalling libfreebl3... [ 3s] [14/41] preinstalling libgcc... [ 3s] [15/41] preinstalling liblua... [ 3s] [16/41] preinstalling liblzma... [ 3s] [17/41] preinstalling libpopt... [ 3s] [18/41] preinstalling libreadline... [ 3s] [19/41] preinstalling libsmack... [ 3s] [20/41] preinstalling libsqlite... [ 3s] [21/41] preinstalling libuuid... [ 3s] [22/41] preinstalling libzstd1... [ 3s] [23/41] preinstalling nspr... [ 3s] [24/41] preinstalling sed... [ 3s] [25/41] preinstalling zlib... [ 3s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 13s] [28/41] preinstalling coreutils... [ 13s] [29/41] preinstalling libacl... [ 13s] [30/41] preinstalling libelf... [ 13s] [31/41] preinstalling libmount... [ 13s] [32/41] preinstalling smack... [ 13s] [33/41] preinstalling bzip2... [ 13s] [34/41] preinstalling libmagic... [ 13s] [35/41] preinstalling libxml2... [ 13s] [36/41] preinstalling tar... [ 13s] [37/41] preinstalling util-linux... [ 13s] [38/41] preinstalling util-linux-su... [ 13s] [39/41] preinstalling nss... [ 13s] [40/41] preinstalling libsoftokn3... [ 13s] [41/41] preinstalling rpm... [ 13s] [ 14s] running qemu-linux-user-x86_64-cross postinstall script [ 14s] running qemu-accel-x86_64-aarch64 postinstall script [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 14s] reordering...cycle: gio-branding-upstream -> libgio [ 14s] breaking dependency libgio -> gio-branding-upstream [ 14s] cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 14s] [1/121] installing libmagic-data-5.41-6.304 [ 15s] [2/121] installing setup-0.9-6.8 [ 15s] [3/121] installing filesystem-3.1-4.1 [ 15s] [4/121] installing glibc-2.30-14.2 [ 15s] [5/121] installing bash-3.2.57-5.1 [ 15s] [6/121] installing cpio-2.8-5.3 [ 15s] [7/121] installing diffutils-3.3-4.3 [ 16s] [8/121] installing findutils-4.3.8-5.371 [ 16s] [9/121] installing gdbm-1.8.3-3.671 [ 16s] [10/121] installing hostname-3.23-3.3 [ 16s] [11/121] installing libatomic-9.2.0-16.2 [ 16s] [12/121] installing libattr-2.5.1-5.362 [ 17s] [13/121] installing libblkid-2.37.4-12.5 [ 17s] [14/121] installing libbz2-1.0.8-5.234 [ 18s] [15/121] installing libcap-2.24-4.357 [ 18s] [16/121] installing libexpat-2.4.1-4.312 [ 18s] [17/121] installing libext2fs-1.46.0-4.43 [ 19s] [18/121] installing libffi-3.3-5.382 [ 19s] [19/121] installing libfreebl3-3.34.1-3.487 [ 19s] [20/121] installing libfuse-2.9.6-6.7 [ 20s] [21/121] installing libgcc-9.2.0-16.2 [ 20s] [22/121] installing libgomp-9.2.0-16.2 [ 20s] [23/121] installing libitm-9.2.0-16.2 [ 21s] [24/121] installing libltdl-2.4.6-4.43 [ 21s] [25/121] installing liblua-5.1.5-3.334 [ 22s] [26/121] installing liblzma-5.2.5-5.298 [ 22s] [27/121] installing libopenssl11-1.1.1l-6.217 [ 22s] [28/121] installing libpcre-8.45-5.6 [ 23s] [29/121] installing libpopt-1.16-3.620 [ 23s] [30/121] installing libpython3_91_0-3.9.10-11.10 [ 24s] [31/121] installing libsmack-1.3.1-4.348 [ 24s] [32/121] installing libsmartcols-2.37.4-12.5 [ 24s] [33/121] installing libsqlite-3.37.2-5.34 [ 25s] [34/121] installing libulockmgr-2.9.6-6.7 [ 25s] [35/121] installing libuuid-2.37.4-12.5 [ 26s] [36/121] installing libzstd1-1.4.5-2.198 [ 26s] [37/121] installing m4-1.4.19-4.1 [ 26s] [38/121] installing net-tools-2.0_20121208git-4.4 [ 26s] [39/121] installing nspr-4.12-3.613 [ 26s] [40/121] installing patch-2.7.6-8.11 [ 26s] [41/121] installing pkg-config-0.29.2-4.29 [ 27s] [42/121] installing sed-4.1c-4.2 [ 27s] [43/121] installing update-alternatives-1.20.5-3.4 [ 27s] [44/121] installing which-2.17-4.4 [ 27s] [45/121] installing zlib-1.2.11-3.650 [ 27s] [46/121] installing build-compare-2015.04.28-3.228 [ 27s] [47/121] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 31s] [48/121] installing terminfo-base-full-6.2-7.280 [ 31s] [49/121] installing coreutils-6.9-5.128 [ 31s] [50/121] installing cpp-9.2.0-16.2 [ 32s] [51/121] installing gawk-3.1.5-4.4 [ 32s] [52/121] installing gcc-c++-9.2.0-16.2 [ 33s] [53/121] installing grep-2.5.2-3.4 [ 33s] [54/121] installing libacl-2.2.53-4.575 [ 33s] [55/121] installing libblkid-devel-2.37.4-12.5 [ 33s] [56/121] installing libelf-0.178-4.80 [ 34s] [57/121] installing libffi-devel-3.3-5.382 [ 34s] [58/121] installing libgfortran-9.2.0-16.2 [ 34s] [59/121] installing libglib-2.70.0-33.85 [ 35s] [60/121] installing libmount-2.37.4-12.5 [ 35s] [61/121] installing libpcreposix-8.45-5.6 [ 35s] [62/121] installing libstdc++-9.2.0-16.2 [ 36s] [63/121] installing make-4.3-3.13 [ 36s] [64/121] installing nss-certs-3.34.1-3.487 [ 36s] [65/121] installing smack-1.3.1-4.348 [ 36s] [66/121] installing bzip2-1.0.8-5.234 [ 36s] [67/121] installing libfdisk-2.37.4-12.5 [ 37s] [68/121] installing libmagic-5.41-6.304 [ 37s] [69/121] installing libxml2-2.9.12-7.154 [ 37s] [70/121] installing perl-5.34.0-7.23 [ 40s] [71/121] installing xz-5.2.5-5.298 [ 40s] [72/121] installing build-mkbaselibs-20120927-3.3 [ 40s] [73/121] installing libstdc++-devel-9.2.0-16.2 [ 41s] [74/121] installing file-5.41-6.304 [ 41s] [75/121] installing libgmodule-2.70.0-33.85 [ 41s] [76/121] installing libgthread-2.70.0-33.85 [ 42s] [77/121] installing linux-glibc-devel-3.10-4.478 [ 42s] [78/121] installing tar-1.17-3.3 [ 42s] [79/121] installing autoconf-2.71-6.44 [ 43s] [80/121] installing binutils-2.33.1-9.252 [ 44s] [81/121] installing glibc-locale-2.30-14.2 [ 44s] [82/121] installing gzip-1.3.12-3.626 [ 44s] [83/121] installing libcc1-9.2.0-16.2 [ 45s] [84/121] installing libgobject-2.70.0-33.85 [ 45s] [85/121] installing libmount-devel-2.37.4-12.5 [ 45s] [86/121] installing libubsan-9.2.0-16.2 [ 46s] [87/121] installing pam-1.1.6-4.2 [ 46s] [88/121] installing libncurses6-6.2-7.280 [ 46s] [89/121] installing libpcrecpp-8.45-5.6 [ 47s] [90/121] installing tzdata-2021e-5.1 [ 47s] [91/121] installing libdw-0.178-4.80 [ 48s] [92/121] installing libarchive-3.5.2-3.106 [ 48s] [93/121] installing shared-mime-info-1.7-5.24 [ 52s] [94/121] installing libncurses-6.2-7.280 [ 52s] [95/121] installing glibc-devel-2.30-14.2 [ 53s] [96/121] installing less-466-3.4 [ 53s] [97/121] installing libreadline-5.2-3.212 [ 53s] [98/121] installing procps-ng-3.3.17-4.1 [ 54s] [99/121] installing automake-1.16.4-6.40 [ 54s] [100/121] installing libasm-0.178-4.80 [ 54s] [101/121] installing build-20120927-3.3 [ 54s] [102/121] installing pcre-devel-8.45-5.6 [ 54s] [103/121] installing gcc-9.2.0-16.2 [ 55s] [104/121] installing qemu-accel-x86_64-aarch64-0.4-10.1 [ 64s] [105/121] installing zlib-devel-1.2.11-3.650 [ 64s] [106/121] installing libtool-2.4.6-4.43 [ 64s] [107/121] installing elfutils-0.178-4.80 [ 64s] [108/121] installing python3-base-3.9.10-11.10 [ 65s] [109/121] installing util-linux-2.37.4-12.5 [ 65s] [110/121] installing python3-3.9.10-11.9 [ 66s] [111/121] installing fuse-2.9.6-6.7 [ 66s] [112/121] installing util-linux-su-2.37.4-12.5 [ 66s] [113/121] installing fuse-devel-2.9.6-6.7 [ 66s] [114/121] installing nss-3.34.1-3.487 [ 66s] [115/121] installing libgio-2.70.0-33.85 [ 67s] [116/121] installing gio-branding-upstream-2.70.0-33.85 [ 67s] [117/121] installing libsoftokn3-3.34.1-3.487 [ 67s] [118/121] installing glib2-tools-2.70.0-33.85 [ 67s] [119/121] installing rpm-4.14.1.1-9.119 [ 68s] [120/121] installing glib2-devel-2.70.0-33.85 [ 68s] [121/121] installing rpm-build-4.14.1.1-9.119 [ 68s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 68s] now finalizing build dir... [ 68s] Running build time source services... [ 69s] build target is aarch64-tizen-linux [ 69s] ----------------------------------------------------------------- [ 69s] I have the following modifications for sshfs.spec: [ 69s] 5c5 [ 69s] < Release: 0 [ 69s] --- [ 69s] > Release: 1.5 [ 69s] ----------------------------------------------------------------- [ 69s] ----- building sshfs.spec (user abuild) [ 69s] ----------------------------------------------------------------- [ 69s] ----------------------------------------------------------------- [ 69s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/49aab069b5f69f27293e7d626650b273-sshfs' -ba /home/abuild/rpmbuild/SOURCES/sshfs.spec [ 69s] Building target platforms: aarch64-tizen-linux [ 69s] Building for target aarch64-tizen-linux [ 69s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.UgyaLp [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + rm -rf sshfs-2.10 [ 69s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/sshfs-2.10.tar.gz [ 69s] + /bin/tar -xof - [ 69s] + STATUS=0 [ 69s] + '[' 0 -ne 0 ']' [ 69s] + cd sshfs-2.10 [ 69s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 69s] + cp /home/abuild/rpmbuild/SOURCES/sshfs.manifest . [ 69s] + cp COPYING LICENSE [ 69s] + exit 0 [ 69s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.k3PbOt [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd sshfs-2.10 [ 69s] ++ uname -m [ 69s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 69s] + ref=/usr/lib/rpm [ 69s] + for s in guess sub [ 69s] ++ find -maxdepth 8 -name config.guess [ 69s] + for s in guess sub [ 69s] ++ find -maxdepth 8 -name config.sub [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 69s] + export CFLAGS [ 69s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 69s] + export CXXFLAGS [ 69s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 69s] + export FFLAGS [ 69s] + LDFLAGS= [ 69s] + export LDFLAGS [ 69s] + autoreconf -fi [ 77s] configure.ac:3: warning: 'AM_CONFIG_HEADER': this macro is obsolete. [ 77s] configure.ac:3: You should use the 'AC_CONFIG_HEADERS' macro instead. [ 77s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 77s] aclocal.m4:1017: AM_CONFIG_HEADER is expanded from... [ 77s] configure.ac:3: the top level [ 81s] configure.ac:5: installing './compile' [ 81s] configure.ac:2: installing './install-sh' [ 81s] configure.ac:2: installing './missing' [ 82s] Makefile.am: installing './INSTALL' [ 82s] Makefile.am:7: warning: source file 'compat/fuse_opt.c' is in a subdirectory, [ 82s] Makefile.am:7: but option 'subdir-objects' is disabled [ 82s] automake: warning: possible forward-incompatibility. [ 82s] automake: At least one source file is in a subdirectory, but the 'subdir-objects' [ 82s] automake: automake option hasn't been enabled. For now, the corresponding output [ 82s] automake: object file(s) will be placed in the top-level directory. However, this [ 82s] automake: behavior may change in a future Automake major version, with object [ 82s] automake: files being placed in the same subdirectory as the corresponding sources. [ 82s] automake: You are advised to start using 'subdir-objects' option throughout your [ 82s] automake: project, to avoid future incompatibilities. [ 82s] Makefile.am: installing './depcomp' [ 82s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 82s] + export CFLAGS [ 82s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 82s] + export CXXFLAGS [ 82s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 82s] + export FFLAGS [ 82s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 83s] checking for a BSD-compatible install... /bin/install -c [ 83s] checking whether build environment is sane... yes [ 83s] checking for a race-free mkdir -p... /bin/mkdir -p [ 83s] checking for gawk... gawk [ 83s] checking whether make sets $(MAKE)... yes [ 83s] checking whether make supports nested variables... yes [ 83s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 83s] checking whether the C compiler works... yes [ 83s] checking for C compiler default output file name... a.out [ 83s] checking for suffix of executables... [ 83s] checking whether we are cross compiling... no [ 83s] checking for suffix of object files... o [ 83s] checking whether the compiler supports GNU C... yes [ 83s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 83s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 83s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 83s] checking whether make supports the include directive... yes (GNU style) [ 83s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 83s] checking for library containing dlsym... -ldl [ 83s] checking OpenSSH version... not found [ 83s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 83s] checking pkg-config is at least version 0.9.0... yes [ 83s] checking for fuse >= 2.3 glib-2.0 gthread-2.0... yes [ 84s] checking for fuse_opt_parse... yes [ 84s] checking that generated files are newer than configure... done [ 84s] configure: creating ./config.status [ 84s] config.status: creating Makefile [ 84s] config.status: creating config.h [ 84s] config.status: executing depfiles commands [ 84s] + make [ 84s] make all-am [ 84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/sshfs-2.10' [ 84s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -D_REENTRANT -DFUSE_USE_VERSION=26 -DLIBDIR=\"/usr/lib64\" -D_FILE_OFFSET_BITS=64 -pthread -I/usr/include/fuse -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -W -MT sshfs-sshfs.o -MD -MP -MF .deps/sshfs-sshfs.Tpo -c -o sshfs-sshfs.o `test -f 'sshfs.c' || echo './'`sshfs.c [ 84s] sshfs.c: In function 'process_requests': [ 84s] sshfs.c:1412:44: warning: cast between incompatible function types from 'int (*)(void *, struct request *)' to 'gboolean (*)(void *, void *, void *)' {aka 'int (*)(void *, void *, void *)'} [-Wcast-function-type] [ 84s] 1412 | g_hash_table_foreach_remove(sshfs.reqtab, (GHRFunc) clean_req, NULL); [ 84s] | ^ [ 84s] sshfs.c: In function 'main': [ 84s] sshfs.c:3689:2: warning: 'g_thread_init' is deprecated [-Wdeprecated-declarations] [ 84s] 3689 | g_thread_init(NULL); [ 84s] | ^~~~~~~~~~~~~ [ 84s] In file included from /usr/include/glib-2.0/glib.h:112, [ 84s] from sshfs.c:37: [ 84s] /usr/include/glib-2.0/glib/deprecated/gthread.h:265:10: note: declared here [ 84s] 265 | void g_thread_init (gpointer vtable); [ 84s] | ^~~~~~~~~~~~~ [ 84s] sshfs.c: In function 'start_ssh': [ 84s] sshfs.c:1061:3: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result] [ 84s] 1061 | chdir("/"); [ 84s] | ^~~~~~~~~~ [ 84s] sshfs.c: In function 'pty_expect_loop': [ 84s] sshfs.c:933:5: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 84s] 933 | write(sshfs.ptyfd, sshfs.password, [ 84s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 84s] 934 | strlen(sshfs.password)); [ 84s] | ~~~~~~~~~~~~~~~~~~~~~~~ [ 85s] sshfs.c: In function 'set_ssh_command': [ 85s] sshfs.c:3394:8: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 85s] 3394 | end = 1; [ 85s] | ~~~~^~~ [ 85s] sshfs.c:3395:3: note: here [ 85s] 3395 | case ' ': [ 85s] | ^~~~ [ 85s] sshfs.c:3410:7: warning: this statement may fall through [-Wimplicit-fallthrough=] [ 85s] 3410 | if (s[1]) [ 85s] | ^ [ 85s] sshfs.c:3412:3: note: here [ 85s] 3412 | default: [ 85s] | ^~~~~~~ [ 86s] mv -f .deps/sshfs-sshfs.Tpo .deps/sshfs-sshfs.Po [ 86s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -D_REENTRANT -DFUSE_USE_VERSION=26 -DLIBDIR=\"/usr/lib64\" -D_FILE_OFFSET_BITS=64 -pthread -I/usr/include/fuse -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -W -MT sshfs-cache.o -MD -MP -MF .deps/sshfs-cache.Tpo -c -o sshfs-cache.o `test -f 'cache.c' || echo './'`cache.c [ 87s] mv -f .deps/sshfs-cache.Tpo .deps/sshfs-cache.Po [ 87s] aarch64-tizen-linux-gnu-gcc -D_FILE_OFFSET_BITS=64 -pthread -I/usr/include/fuse -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -W -o sshfs sshfs-sshfs.o sshfs-cache.o -lfuse -pthread -lgthread-2.0 -pthread -lglib-2.0 [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/sshfs-2.10' [ 87s] + exit 0 [ 87s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EBBOws [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + cd sshfs-2.10 [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 [ 87s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 [ 87s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 install [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/sshfs-2.10' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/bin' [ 87s] /bin/install -c sshfs '/home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/bin' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/share/man/man1' [ 87s] /bin/install -c -m 644 sshfs.1 '/home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/share/man/man1' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/sshfs-2.10' [ 87s] + rm -f /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/share/info/dir [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 -regex '.*\.la$' [ 87s] + xargs rm -f -- [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 -regex '.*\.a$' [ 87s] + xargs rm -f -- [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/share/man [ 87s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 2.10-1.5 --unique-debug-src-base sshfs-2.10-1.5.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/sshfs-2.10 [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/bin/sshfs [ 87s] 206 blocks [ 87s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/sshfs-2.10/sshfs-debuginfo.manifest [ 87s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/sshfs-2.10/sshfs-debugsource.manifest [ 87s] + /usr/lib/rpm/check-buildroot [ 88s] + /usr/lib/rpm//brp-compress [ 88s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 88s] + /usr/lib/rpm/brp-python-hardlink [ 88s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 [ 88s] Processing files: sshfs-2.10-1.5.aarch64 [ 88s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 88s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 88s] [ 88s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.TXSedq [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd sshfs-2.10 [ 88s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/share/licenses/sshfs [ 88s] + export LC_ALL=C [ 88s] + LC_ALL=C [ 88s] + export LICENSEDIR [ 88s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/share/licenses/sshfs [ 88s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64/usr/share/licenses/sshfs [ 88s] + exit 0 [ 88s] Provides: sshfs = 2.10-1.5 sshfs(aarch-64) = 2.10-1.5 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.28)(64bit) libfuse.so.2()(64bit) libfuse.so.2(FUSE_2.2)(64bit) libfuse.so.2(FUSE_2.4)(64bit) libfuse.so.2(FUSE_2.5)(64bit) libfuse.so.2(FUSE_2.6)(64bit) libfuse.so.2(FUSE_2.7)(64bit) libglib-2.0.so.0()(64bit) libgthread-2.0.so.0()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) [ 88s] Processing files: sshfs-debugsource-2.10-1.5.aarch64 [ 88s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 88s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 88s] [ 88s] Provides: sshfs-debugsource = 2.10-1.5 sshfs-debugsource(aarch-64) = 2.10-1.5 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Processing files: sshfs-debuginfo-2.10-1.5.aarch64 [ 88s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 88s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 88s] [ 88s] Provides: sshfs-debuginfo = 2.10-1.5 sshfs-debuginfo(aarch-64) = 2.10-1.5 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Recommends: sshfs-debugsource(aarch-64) = 2.10-1.5 [ 88s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 [ 88s] Wrote: /home/abuild/rpmbuild/SRPMS/sshfs-2.10-1.5.src.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/sshfs-2.10-1.5.aarch64.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/sshfs-debugsource-2.10-1.5.aarch64.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/sshfs-debuginfo-2.10-1.5.aarch64.rpm [ 88s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.KXjp1q [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd sshfs-2.10 [ 88s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/sshfs-2.10-1.5.aarch64 [ 88s] + exit 0 [ 88s] ... checking for files with abuild user/group [ 88s] ... creating baselibs [ 89s] [ 89s] obspw08 finished "build sshfs.spec" at Fri May 6 05:52:53 UTC 2022. [ 89s] Retried build at Tue May 17 05:39:58 2022 returned same result, skipped