[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw24 started "build _service:gbs:xmlto.spec" at Fri May 6 05:24:21 UTC 2022. [ 0s] [ 0s] Building xmlto for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '8136f1018e524beb7949ff93ec85212c' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:xmlto.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:xmlto.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:xmlto.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-aarch64 postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 10s] reordering...cycle: libsoftokn3 -> nss [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] done [ 11s] [1/107] installing libmagic-data-5.41-6.304 [ 11s] [2/107] installing setup-0.9-6.8 [ 11s] [3/107] installing filesystem-3.1-4.1 [ 11s] [4/107] installing glibc-2.30-14.2 [ 11s] [5/107] installing bash-3.2.57-5.1 [ 12s] [6/107] installing cpio-2.8-5.3 [ 12s] [7/107] installing diffutils-3.3-4.3 [ 12s] [8/107] installing fdupes-2.1.2-5.104 [ 12s] [9/107] installing findutils-4.3.8-5.371 [ 12s] [10/107] installing gdbm-1.8.3-3.671 [ 12s] [11/107] installing hostname-3.23-3.3 [ 12s] [12/107] installing libatomic-9.2.0-16.2 [ 12s] [13/107] installing libattr-2.5.1-5.362 [ 13s] [14/107] installing libblkid-2.37.4-12.5 [ 13s] [15/107] installing libbz2-1.0.8-5.234 [ 13s] [16/107] installing libcap-2.24-4.357 [ 14s] [17/107] installing libext2fs-1.46.0-4.43 [ 14s] [18/107] installing libfreebl3-3.34.1-3.487 [ 14s] [19/107] installing libgcc-9.2.0-16.2 [ 15s] [20/107] installing libgomp-9.2.0-16.2 [ 15s] [21/107] installing libgpg-error-1.43-3.1 [ 15s] [22/107] installing libitm-9.2.0-16.2 [ 16s] [23/107] installing libltdl-2.4.6-4.43 [ 16s] [24/107] installing liblua-5.1.5-3.334 [ 16s] [25/107] installing liblzma-5.2.5-5.298 [ 17s] [26/107] installing libopenssl11-1.1.1l-6.217 [ 17s] [27/107] installing libpcre-8.45-5.6 [ 18s] [28/107] installing libpopt-1.16-3.620 [ 18s] [29/107] installing libsmack-1.3.1-4.348 [ 18s] [30/107] installing libsmartcols-2.37.4-12.5 [ 19s] [31/107] installing libsqlite-3.37.2-5.34 [ 19s] [32/107] installing libuuid-2.37.4-12.5 [ 19s] [33/107] installing libzstd1-1.4.5-2.198 [ 20s] [34/107] installing m4-1.4.19-4.1 [ 20s] [35/107] installing net-tools-2.0_20121208git-4.4 [ 20s] [36/107] installing nspr-4.12-3.613 [ 20s] [37/107] installing patch-2.7.6-8.11 [ 20s] [38/107] installing pkg-config-0.29.2-4.29 [ 20s] [39/107] installing sed-4.1c-4.2 [ 20s] [40/107] installing update-alternatives-1.20.5-3.4 [ 20s] [41/107] installing which-2.17-4.4 [ 20s] [42/107] installing zlib-1.2.11-3.650 [ 21s] [43/107] installing build-compare-2015.04.28-3.228 [ 21s] [44/107] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 24s] [45/107] installing terminfo-base-full-6.2-7.280 [ 24s] [46/107] installing coreutils-6.9-5.128 [ 24s] [47/107] installing cpp-9.2.0-16.2 [ 25s] [48/107] installing flex-2.6.4-3.124 [ 25s] [49/107] installing gawk-3.1.5-4.4 [ 25s] [50/107] installing gcc-c++-9.2.0-16.2 [ 26s] [51/107] installing grep-2.5.2-3.4 [ 26s] [52/107] installing libacl-2.2.53-4.575 [ 27s] [53/107] installing libelf-0.178-4.80 [ 27s] [54/107] installing libgcrypt-1.10.1-3.1 [ 27s] [55/107] installing libgfortran-9.2.0-16.2 [ 28s] [56/107] installing libmount-2.37.4-12.5 [ 28s] [57/107] installing libstdc++-9.2.0-16.2 [ 28s] [58/107] installing make-4.3-3.13 [ 29s] [59/107] installing nss-certs-3.34.1-3.487 [ 29s] [60/107] installing smack-1.3.1-4.348 [ 29s] [61/107] installing bzip2-1.0.8-5.234 [ 29s] [62/107] installing libfdisk-2.37.4-12.5 [ 29s] [63/107] installing libmagic-5.41-6.304 [ 30s] [64/107] installing libxml2-2.9.12-7.154 [ 30s] [65/107] installing perl-5.34.0-7.23 [ 33s] [66/107] installing xz-5.2.5-5.298 [ 33s] [67/107] installing build-mkbaselibs-20120927-3.3 [ 33s] [68/107] installing libstdc++-devel-9.2.0-16.2 [ 34s] [69/107] installing file-5.41-6.304 [ 34s] [70/107] installing linux-glibc-devel-3.10-4.478 [ 36s] [71/107] installing tar-1.17-3.3 [ 36s] [72/107] installing autoconf-2.71-6.44 [ 37s] [73/107] installing binutils-2.33.1-9.252 [ 38s] [74/107] installing glibc-locale-2.30-14.2 [ 39s] [75/107] installing gzip-1.3.12-3.626 [ 39s] [76/107] installing libcc1-9.2.0-16.2 [ 40s] [77/107] installing libubsan-9.2.0-16.2 [ 41s] [78/107] installing pam-1.1.6-4.2 [ 42s] [79/107] installing libncurses6-6.2-7.280 [ 43s] [80/107] installing tzdata-2021e-5.1 [ 43s] [81/107] installing libdw-0.178-4.80 [ 44s] [82/107] installing libxslt-1.1.34-1.6 [ 45s] [83/107] installing libarchive-3.5.2-3.106 [ 45s] [84/107] installing libncurses-6.2-7.280 [ 46s] [85/107] installing glibc-devel-2.30-14.2 [ 46s] [86/107] installing less-466-3.4 [ 46s] [87/107] installing libreadline-5.2-3.212 [ 47s] [88/107] installing procps-ng-3.3.17-4.1 [ 48s] [89/107] installing automake-1.16.4-6.40 [ 48s] [90/107] installing libasm-0.178-4.80 [ 48s] [91/107] installing build-20120927-3.3 [ 48s] [92/107] installing gcc-9.2.0-16.2 [ 50s] [93/107] installing qemu-accel-x86_64-aarch64-0.4-10.1 [ 58s] [94/107] installing libxml2-tools-2.9.12-7.154 [ 58s] [95/107] installing libtool-2.4.6-4.43 [ 58s] [96/107] installing elfutils-0.178-4.80 [ 58s] [97/107] installing util-linux-2.37.4-12.5 [ 59s] [98/107] installing util-linux-su-2.37.4-12.5 [ 59s] [99/107] installing sgml-skel-0.7.1-2.1 [ 59s] [100/107] installing iso_ent-2000.11.03-1.1 [ 59s] [101/107] installing xmlcharent-0.3-1.1 [ 60s] [102/107] installing docbook_4-4.5-1.1 [ 60s] [103/107] installing docbook-xsl-stylesheets-1.79.2-2.1 [ 63s] [104/107] installing nss-3.34.1-3.487 [ 63s] [105/107] installing libsoftokn3-3.34.1-3.487 [ 64s] [106/107] installing rpm-4.14.1.1-9.119 [ 64s] [107/107] installing rpm-build-4.14.1.1-9.119 [ 64s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 64s] now finalizing build dir... [ 65s] Running build time source services... [ 65s] build target is aarch64-tizen-linux [ 65s] ----------------------------------------------------------------- [ 65s] I have the following modifications for xmlto.spec: [ 65s] 4c4 [ 65s] < Release: 0 [ 65s] --- [ 65s] > Release: 2.19 [ 65s] ----------------------------------------------------------------- [ 65s] ----- building xmlto.spec (user abuild) [ 65s] ----------------------------------------------------------------- [ 65s] ----------------------------------------------------------------- [ 65s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/8136f1018e524beb7949ff93ec85212c-xmlto' -ba /home/abuild/rpmbuild/SOURCES/xmlto.spec [ 65s] Building target platforms: aarch64-tizen-linux [ 65s] Building for target aarch64-tizen-linux [ 65s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Mfaofo [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + rm -rf xmlto-0.0.25 [ 65s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/xmlto-0.0.25.tar.bz2 [ 65s] + /bin/tar -xof - [ 65s] + STATUS=0 [ 65s] + '[' 0 -ne 0 ']' [ 65s] + cd xmlto-0.0.25 [ 65s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 65s] + echo 'Patch #0 (0001-xmlto-nonvoid.patch):' [ 65s] Patch #0 (0001-xmlto-nonvoid.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file xmlif/xmlif.c [ 65s] patching file xmlif/xmlif.l [ 65s] + echo 'Patch #1 (0002-xmlto-overflow.patch):' [ 65s] Patch #1 (0002-xmlto-overflow.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file xmlif/xmlif.c [ 65s] + echo 'Patch #2 (0003-xmlto-xsltopts.patch):' [ 65s] Patch #2 (0003-xmlto-xsltopts.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file xmlto.in [ 65s] + echo 'Patch #3 (0004-xmlto-codecleanup.patch):' [ 65s] Patch #3 (0004-xmlto-codecleanup.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file xmlif/xmlif.l [ 65s] + echo 'Patch #4 (0005-xmlto-lynx-empty-file.patch):' [ 65s] Patch #4 (0005-xmlto-lynx-empty-file.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file xmlto.in [ 65s] + cp /home/abuild/rpmbuild/SOURCES/xmlto.manifest . [ 65s] + rm -f xmlif/xmlif.c [ 65s] + exit 0 [ 65s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.nnyJLo [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd xmlto-0.0.25 [ 65s] ++ uname -m [ 65s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 65s] + ref=/usr/lib/rpm [ 65s] + for s in guess sub [ 65s] ++ find -maxdepth 8 -name config.guess [ 65s] + for s in guess sub [ 65s] ++ find -maxdepth 8 -name config.sub [ 65s] + LANG=C [ 65s] + export LANG [ 65s] + unset DISPLAY [ 65s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 65s] + export CFLAGS [ 65s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 65s] + export CXXFLAGS [ 65s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 65s] + export FFLAGS [ 65s] + LDFLAGS= [ 65s] + export LDFLAGS [ 65s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 65s] + export CFLAGS [ 65s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 65s] + export CXXFLAGS [ 65s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 65s] + export FFLAGS [ 65s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 66s] checking for a BSD-compatible install... /bin/install -c [ 67s] checking whether build environment is sane... yes [ 67s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 67s] checking for gawk... gawk [ 67s] checking whether make sets $(MAKE)... yes [ 67s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 67s] checking whether the C compiler works... yes [ 67s] checking for C compiler default output file name... a.out [ 67s] checking for suffix of executables... [ 67s] checking whether we are cross compiling... no [ 67s] checking for suffix of object files... o [ 67s] checking whether we are using the GNU C compiler... yes [ 67s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 67s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 67s] checking for style of include used by make... GNU [ 67s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 67s] checking whether aarch64-tizen-linux-gnu-gcc and cc understand -c and -o together... yes [ 67s] checking for flex... flex [ 67s] checking lex output file root... lex.yy [ 68s] checking lex library... -lfl [ 68s] checking whether yytext is a pointer... yes [ 68s] checking for mktemp... mktemp [ 68s] checking for find... find [ 68s] checking for bash... /bin/sh [ 68s] checking for getopt... getopt [ 68s] checking for long options support in getopt... yes [ 68s] checking for paperconf... paperconf [ 68s] checking for locale... /bin/locale [ 68s] checking for xmllint... /bin/xmllint [ 68s] checking for xsltproc... xsltproc [ 68s] checking for dblatex... dblatex [ 68s] checking for fop... fop [ 68s] checking for xmltex... xmltex [ 68s] checking for pdfxmltex... pdfxmltex [ 68s] checking for default backend... DEFAULT [ 68s] checking for lynx... lynx [ 68s] checking for links... links [ 68s] checking for w3m... w3m [ 68s] checking for tail... /bin/tail [ 68s] checking for grep... /bin/grep [ 68s] checking for cp... /bin/cp [ 68s] checking for zip... zip [ 68s] checking for default web browser... w3m [ 68s] configure: creating ./config.status [ 69s] config.status: creating Makefile [ 69s] config.status: creating xmlto [ 69s] config.status: creating xmlto.spec [ 69s] config.status: creating config.h [ 69s] config.status: executing depfiles commands [ 69s] + make -j8 [ 69s] make all-am [ 69s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 69s] /bin/sh ./ylwrap xmlif/xmlif.l lex.yy.c xmlif/xmlif.c -- flex [ 69s] depbase=`echo xmlif/xmlif.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ [ 69s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -MT xmlif/xmlif.o -MD -MP -MF $depbase.Tpo -c -o xmlif/xmlif.o xmlif/xmlif.c &&\ [ 69s] mv -f $depbase.Tpo $depbase.Po [ 69s] xmlif/xmlif.c:2004:16: warning: 'input' defined but not used [-Wunused-function] [ 69s] 2004 | #else [ 69s] | ^ [ 69s] xmlif/xmlif.c:1961:17: warning: 'yyunput' defined but not used [-Wunused-function] [ 69s] 1961 | [ 69s] | ^ [ 69s] aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o xmlif/xmlif xmlif/xmlif.o [ 69s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 69s] + exit 0 [ 69s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.6V1b1p [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd xmlto-0.0.25 [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 [ 69s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 [ 69s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 install [ 69s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 69s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/bin" [ 69s] /bin/install -c xmlif/xmlif '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/bin' [ 69s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/bin" [ 69s] /bin/install -c xmlto '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/bin' [ 69s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/man/man1" [ 69s] /bin/install -c -m 644 man/man1/xmlto.1 man/man1/xmlif.1 '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/man/man1' [ 69s] test -z "/usr/share/xmlto" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto" [ 69s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook' [ 69s] /bin/install -c -m 644 format/docbook/dvi format/docbook/epub format/docbook/fo format/docbook/html format/docbook/html-nochunks format/docbook/xhtml format/docbook/xhtml-nochunks format/docbook/man format/docbook/pdf format/docbook/ps format/docbook/txt format/docbook/htmlhelp format/docbook/javahelp format/docbook/mif format/docbook/pcl format/docbook/svg format/docbook/awt '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook' [ 70s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1' [ 70s] /bin/install -c -m 644 format/xhtml1/dvi format/xhtml1/fo format/xhtml1/pdf format/xhtml1/ps format/xhtml1/txt format/xhtml1/awt format/xhtml1/mif format/xhtml1/pcl format/xhtml1/svg '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1' [ 70s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/fo' [ 70s] /bin/install -c -m 644 format/fo/ps format/fo/awt format/fo/mif format/fo/pcl format/fo/svg format/fo/txt format/fo/dvi format/fo/pdf '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/fo' [ 70s] /bin/install -c -m 644 xmlto.mak '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/.' [ 70s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 70s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/info/dir [ 70s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 -regex '.*\.la$' [ 70s] + xargs rm -f -- [ 70s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 -regex '.*\.a$' [ 70s] + xargs rm -f -- [ 70s] + mkdir /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/xsl [ 70s] + _target= [ 70s] + _symlinks=0 [ 70s] + _files=() [ 70s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/ps [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z [ 70s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 70s] ++ sort [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/ps [ 70s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 70s] ++ seq 1 2 [ 70s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 70s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 70s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 70s] + test 0 = 1 [ 70s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 70s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 70s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/ps [ 70s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/ps [ 70s] + test 0 = 1 [ 70s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/ps [ 70s] + _files=() [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/svg [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z [ 70s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 70s] ++ sort [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/svg [ 70s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 70s] ++ seq 1 1 [ 70s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 70s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/svg [ 70s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/svg [ 70s] + test 0 = 1 [ 70s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/svg [ 70s] + _files=() [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/mif [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/awt [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z [ 70s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/mif [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ sort [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/awt [ 70s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/awt [ 70s] ++ seq 1 1 [ 70s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 70s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/mif [ 70s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/mif [ 70s] + test 0 = 1 [ 70s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/xhtml1/mif [ 70s] + _files=() [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pdf [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/ps [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z [ 70s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pdf [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/ps [ 70s] ++ sort [ 70s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pdf [ 70s] ++ seq 1 1 [ 70s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 70s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/ps [ 70s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/ps [ 70s] + test 0 = 1 [ 70s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pdf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/ps [ 70s] + _files=() [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pcl [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/svg [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z [ 70s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pcl [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/svg [ 70s] ++ sort [ 70s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pcl [ 70s] ++ seq 1 1 [ 70s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 70s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/svg [ 70s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/svg [ 70s] + test 0 = 1 [ 70s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/svg [ 70s] + _files=() [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/mif [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/awt [ 70s] + _files+=($_file) [ 70s] + read _file [ 70s] + test -z [ 70s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/mif [ 70s] ++ for i in '${_files[*]}' [ 70s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/awt [ 70s] ++ sort [ 70s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/awt [ 70s] ++ seq 1 1 [ 70s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 70s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/mif [ 70s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/mif [ 70s] + test 0 = 1 [ 70s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/xmlto/format/docbook/mif [ 70s] + _files=() [ 70s] + read _file [ 70s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 0.0.25-2.19 --unique-debug-src-base xmlto-0.0.25-2.19.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/xmlto-0.0.25 [ 70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/bin/xmlif [ 70s] cpio: xmlif.l: Cannot stat: No such file or directory [ 70s] 184 blocks [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlto-0.0.25/xmlto-debuginfo.manifest [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlto-0.0.25/xmlto-debugsource.manifest [ 70s] + /usr/lib/rpm/check-buildroot [ 71s] + /usr/lib/rpm//brp-compress [ 71s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 71s] + /usr/lib/rpm/brp-python-hardlink [ 71s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 [ 71s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.ZYDm9o [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd xmlto-0.0.25 [ 71s] + make check [ 71s] make check-TESTS [ 71s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 71s] PASS: xmlif/test/run-test [ 71s] ============= [ 71s] 1 test passed [ 71s] ============= [ 71s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 71s] + exit 0 [ 71s] Processing files: xmlto-0.0.25-2.19.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.o3y47l [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd xmlto-0.0.25 [ 71s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/doc/packages/xmlto [ 71s] + export LC_ALL=C [ 71s] + LC_ALL=C [ 71s] + export DOCDIR [ 71s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/doc/packages/xmlto [ 71s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64/usr/share/doc/packages/xmlto [ 71s] + exit 0 [ 71s] Provides: xmlto = 0.0.25-2.19 xmlto(aarch-64) = 0.0.25-2.19 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires: /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 71s] Processing files: xmlto-debugsource-0.0.25-2.19.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: xmlto-debugsource = 0.0.25-2.19 xmlto-debugsource(aarch-64) = 0.0.25-2.19 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Processing files: xmlto-debuginfo-0.0.25-2.19.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: xmlto-debuginfo = 0.0.25-2.19 xmlto-debuginfo(aarch-64) = 0.0.25-2.19 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Recommends: xmlto-debugsource(aarch-64) = 0.0.25-2.19 [ 71s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 [ 71s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlto-0.0.25-2.19.src.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-0.0.25-2.19.aarch64.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debugsource-0.0.25-2.19.aarch64.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debuginfo-0.0.25-2.19.aarch64.rpm [ 71s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JQnMlm [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd xmlto-0.0.25 [ 71s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.19.aarch64 [ 71s] + exit 0 [ 71s] ... checking for files with abuild user/group [ 71s] ... creating baselibs [ 72s] [ 72s] obspw24 finished "build xmlto.spec" at Fri May 6 05:25:33 UTC 2022. [ 72s] Retried build at Tue May 17 04:50:54 2022 returned same result, skipped