[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw04 started "build _service:gbs:hal-backend-device-tm1.spec" at Fri May 6 06:09:33 UTC 2022. [ 0s] [ 0s] Building hal-backend-device-tm1 for project 'Tizen:Unified' repository 'standard' arch 'armv7hl' srcmd5 'c35f0b1ca245bbb333de6251a35b14b3' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [28/41] preinstalling coreutils... [ 9s] [29/41] preinstalling libacl... [ 9s] [30/41] preinstalling libelf... [ 9s] [31/41] preinstalling libmount... [ 9s] [32/41] preinstalling smack... [ 9s] [33/41] preinstalling bzip2... [ 9s] [34/41] preinstalling libmagic... [ 9s] [35/41] preinstalling libxml2... [ 9s] [36/41] preinstalling tar... [ 9s] [37/41] preinstalling util-linux... [ 9s] [38/41] preinstalling util-linux-su... [ 9s] [39/41] preinstalling nss... [ 9s] [40/41] preinstalling libsoftokn3... [ 9s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7hl postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 10s] reordering...cycle: gio-branding-upstream -> libgio [ 10s] breaking dependency libgio -> gio-branding-upstream [ 10s] cycle: libsoftokn3 -> nss [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] done [ 10s] [1/141] installing dlog-config-persistent-logs-7.0.3-127.3 [ 10s] [2/141] installing libmagic-data-5.41-6.305 [ 10s] [3/141] installing setup-0.9-6.8 [ 10s] [4/141] installing filesystem-3.1-4.1 [ 10s] [5/141] installing glibc-2.30-14.2 [ 11s] [6/141] installing libatomic-9.2.0-16.2 [ 11s] [7/141] installing libgcc-9.2.0-16.2 [ 12s] [8/141] installing bash-3.2.57-5.1 [ 12s] [9/141] installing capi-base-common-0.4.70-54.2 [ 12s] [10/141] installing cpio-2.8-5.3 [ 12s] [11/141] installing diffutils-3.3-4.3 [ 12s] [12/141] installing findutils-4.3.8-5.372 [ 12s] [13/141] installing gdbm-1.8.3-3.672 [ 13s] [14/141] installing hostname-3.23-3.3 [ 13s] [15/141] installing libattr-2.5.1-5.363 [ 13s] [16/141] installing libblkid-2.37.4-12.5 [ 13s] [17/141] installing libbz2-1.0.8-5.235 [ 14s] [18/141] installing libcap-2.24-4.358 [ 14s] [19/141] installing libexpat-2.4.1-4.313 [ 14s] [20/141] installing libext2fs-1.46.0-4.43 [ 14s] [21/141] installing libffi-3.3-5.383 [ 15s] [22/141] installing libfreebl3-3.34.1-3.487 [ 15s] [23/141] installing libgfortran-9.2.0-16.2 [ 15s] [24/141] installing libgomp-9.2.0-16.2 [ 16s] [25/141] installing libitm-9.2.0-16.2 [ 16s] [26/141] installing libltdl-2.4.6-4.44 [ 16s] [27/141] installing liblua-5.1.5-3.334 [ 17s] [28/141] installing liblzma-5.2.5-5.298 [ 17s] [29/141] installing libopenssl11-1.1.1l-6.217 [ 17s] [30/141] installing libpcre-8.45-5.6 [ 18s] [31/141] installing libpopt-1.16-3.621 [ 18s] [32/141] installing libpython3_91_0-3.9.10-11.10 [ 18s] [33/141] installing libsmack-1.3.1-4.349 [ 19s] [34/141] installing libsmartcols-2.37.4-12.5 [ 19s] [35/141] installing libsqlite-3.37.2-5.35 [ 19s] [36/141] installing libstdc++-9.2.0-16.2 [ 20s] [37/141] installing libuuid-2.37.4-12.5 [ 20s] [38/141] installing libzstd1-1.4.5-2.199 [ 20s] [39/141] installing m4-1.4.19-4.2 [ 21s] [40/141] installing net-tools-2.0_20121208git-4.4 [ 21s] [41/141] installing nspr-4.12-3.614 [ 21s] [42/141] installing patch-2.7.6-8.12 [ 21s] [43/141] installing pkg-config-0.29.2-4.30 [ 21s] [44/141] installing sed-4.1c-4.2 [ 21s] [45/141] installing update-alternatives-1.20.5-3.4 [ 21s] [46/141] installing which-2.17-4.4 [ 21s] [47/141] installing zlib-1.2.11-3.651 [ 21s] [48/141] installing shadow-utils-4.1.4.2-3.46 [ 22s] [49/141] installing build-compare-2015.04.28-3.228 [ 22s] [50/141] installing libstdc++-devel-9.2.0-16.2 [ 22s] [51/141] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 25s] [52/141] installing terminfo-base-full-6.2-7.281 [ 26s] [53/141] installing capi-base-common-devel-0.4.70-54.2 [ 26s] [54/141] installing cpp-9.2.0-16.2 [ 26s] [55/141] installing gcc-c++-9.2.0-16.2 [ 27s] [56/141] installing libblkid-devel-2.37.4-12.5 [ 27s] [57/141] installing libffi-devel-3.3-5.383 [ 27s] [58/141] installing binutils-2.33.1-9.253 [ 27s] [59/141] installing coreutils-6.9-5.128 [ 27s] [60/141] installing gawk-3.1.5-4.4 [ 28s] [61/141] installing grep-2.5.2-3.4 [ 28s] [62/141] installing libacl-2.2.53-4.576 [ 28s] [63/141] installing libcc1-9.2.0-16.2 [ 28s] [64/141] installing libconfig-1.6-5.2 [ 29s] [65/141] installing libelf-0.178-4.81 [ 29s] [66/141] installing libglib-2.70.0-33.85 [ 29s] [67/141] installing libmount-2.37.4-12.5 [ 30s] [68/141] installing libpcreposix-8.45-5.6 [ 30s] [69/141] installing libubsan-9.2.0-16.2 [ 30s] [70/141] installing make-4.3-3.13 [ 31s] [71/141] installing nss-certs-3.34.1-3.487 [ 31s] [72/141] installing smack-1.3.1-4.349 [ 31s] [73/141] installing bzip2-1.0.8-5.235 [ 31s] [74/141] installing libfdisk-2.37.4-12.5 [ 31s] [75/141] installing libkmod-29-2.4 [ 31s] [76/141] installing libmagic-5.41-6.305 [ 32s] [77/141] installing libpcrecpp-8.45-5.6 [ 32s] [78/141] installing libxml2-2.9.12-7.154 [ 32s] [79/141] installing perl-5.34.0-7.23 [ 35s] [80/141] installing xz-5.2.5-5.298 [ 35s] [81/141] installing dlog-7.0.3-127.3 [ 36s] [82/141] installing build-mkbaselibs-20120927-3.3 [ 36s] [83/141] installing linux-glibc-devel-3.10-4.479 [ 36s] [84/141] installing acl-2.2.53-4.576 [ 36s] [85/141] installing autoconf-2.71-6.45 [ 37s] [86/141] installing dlog-logger-7.0.3-127.3 [ 40s] [87/141] installing file-5.41-6.305 [ 41s] [88/141] installing glibc-locale-2.30-14.2 [ 42s] [89/141] installing libgmodule-2.70.0-33.85 [ 42s] [90/141] installing libgthread-2.70.0-33.85 [ 43s] [91/141] installing libmount-devel-2.37.4-12.5 [ 43s] [92/141] installing libusbgx-0.1.0-5.2 [ 43s] [93/141] installing tar-1.17-3.4 [ 43s] [94/141] installing gzip-1.3.12-3.627 [ 43s] [95/141] installing libgobject-2.70.0-33.85 [ 43s] [96/141] installing libncurses6-6.2-7.281 [ 44s] [97/141] installing pam-1.1.6-4.2 [ 44s] [98/141] installing tzdata-2021e-5.1 [ 45s] [99/141] installing libdw-0.178-4.81 [ 45s] [100/141] installing pcre-devel-8.45-5.6 [ 45s] [101/141] installing libarchive-3.5.2-3.107 [ 45s] [102/141] installing shared-mime-info-1.7-5.24 [ 51s] [103/141] installing gcc-9.2.0-16.2 [ 52s] [104/141] installing libncurses-6.2-7.281 [ 52s] [105/141] installing glibc-devel-2.30-14.2 [ 52s] [106/141] installing qemu-accel-x86_64-armv7hl-0.4-10.1 [ 64s] [107/141] installing automake-1.16.4-6.41 [ 65s] [108/141] installing less-466-3.4 [ 65s] [109/141] installing libreadline-5.2-3.212 [ 65s] [110/141] installing procps-ng-3.3.17-4.1 [ 65s] [111/141] installing libasm-0.178-4.81 [ 65s] [112/141] installing build-20120927-3.3 [ 65s] [113/141] installing libsystemd-244-94.2 [ 66s] [114/141] installing libdlog-7.0.3-127.3 [ 66s] [115/141] installing cmake-3.21.3-6.11 [ 67s] [116/141] installing libdlog-devel-7.0.3-127.3 [ 68s] [117/141] installing zlib-devel-1.2.11-3.651 [ 68s] [118/141] installing libtool-2.4.6-4.44 [ 70s] [119/141] installing elfutils-0.178-4.81 [ 71s] [120/141] installing python3-base-3.9.10-11.10 [ 72s] [121/141] installing util-linux-2.37.4-12.5 [ 72s] [122/141] installing systemd-244-94.2 [ 74s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 74s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 74s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 74s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 74s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 74s] [123/141] installing python3-3.9.10-11.9 [ 74s] [124/141] installing systemd-devel-244-94.2 [ 74s] [125/141] installing util-linux-su-2.37.4-12.5 [ 75s] [126/141] installing nss-3.34.1-3.487 [ 75s] [127/141] installing libgio-2.70.0-33.85 [ 75s] [128/141] installing gio-branding-upstream-2.70.0-33.85 [ 75s] [129/141] installing hal-api-common-0.0.1-33.2 [ 75s] [130/141] installing libsoftokn3-3.34.1-3.487 [ 76s] [131/141] installing glib2-tools-2.70.0-33.85 [ 76s] [132/141] installing libsyscommon-4.1-44.2 [ 76s] [133/141] installing rpm-4.14.1.1-9.119 [ 77s] [134/141] installing hal-api-common-devel-0.0.1-33.2 [ 77s] [135/141] installing hal-api-device-1.0.0-15.2 [ 78s] [136/141] installing hal-backend-device-common-1-8.2 [ 78s] [137/141] installing glib2-devel-2.70.0-33.85 [ 78s] [138/141] installing rpm-build-4.14.1.1-9.119 [ 78s] [139/141] installing hal-api-device-devel-1.0.0-15.2 [ 78s] [140/141] installing hal-backend-device-common-devel-1-8.2 [ 78s] [141/141] installing libsyscommon-devel-4.1-44.2 [ 78s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 78s] now finalizing build dir... [ 79s] Running build time source services... [ 79s] build target is armv7hl-tizen-linux [ 79s] ----------------------------------------------------------------- [ 79s] I have the following modifications for hal-backend-device-tm1.spec: [ 79s] 5c5 [ 79s] < Release: 0 [ 79s] --- [ 79s] > Release: 6.4 [ 79s] ----------------------------------------------------------------- [ 79s] ----- building hal-backend-device-tm1.spec (user abuild) [ 79s] ----------------------------------------------------------------- [ 79s] ----------------------------------------------------------------- [ 80s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/c35f0b1ca245bbb333de6251a35b14b3-hal-backend-device-tm1' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1.spec [ 80s] Building target platforms: armv7hl-tizen-linux [ 80s] Building for target armv7hl-tizen-linux [ 80s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.NX10MI [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + rm -rf hal-backend-device-tm1-0.0.1 [ 80s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1-0.0.1.tar.gz [ 80s] + /bin/tar -xof - [ 80s] + STATUS=0 [ 80s] + '[' 0 -ne 0 ']' [ 80s] + cd hal-backend-device-tm1-0.0.1 [ 80s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 80s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1.manifest . [ 80s] + exit 0 [ 80s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.bFjbjI [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd hal-backend-device-tm1-0.0.1 [ 80s] ++ uname -m [ 80s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + LDFLAGS= [ 80s] + export LDFLAGS [ 80s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON -DCMAKE_INSTALL_PREFIX=/usr -DHAL_LIB_DIR=/hal/lib -DHAL_LICENSE_DIR=/hal/share/licenses -DENABLE_DLOG=on [ 80s] CMake Warning: [ 80s] No source or binary directory provided. Both will be assumed to be the [ 80s] same as the current working directory, but note that this warning will [ 80s] become a fatal error in future CMake releases. [ 80s] [ 80s] [ 80s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 80s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 80s] CMake. [ 80s] [ 80s] Update the VERSION argument value or use a ... suffix to tell [ 80s] CMake that the project does not need compatibility with older versions. [ 80s] [ 80s] [ 80s] -- The C compiler identification is GNU 9.2.0 [ 80s] -- Detecting C compiler ABI info [ 80s] -- Detecting C compiler ABI info - done [ 80s] -- Check for working C compiler: /bin/cc - skipped [ 80s] -- Detecting C compile features [ 80s] -- Detecting C compile features - done [ 80s] CMake Deprecation Warning at hw/battery/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 80s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 80s] CMake. [ 80s] [ 80s] Update the VERSION argument value or use a ... suffix to tell [ 80s] CMake that the project does not need compatibility with older versions. [ 80s] [ 80s] [ 80s] -- Found PkgConfig: /bin/pkg-config (found version "0.29.2") [ 80s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 80s] -- Found hal-backend-device-common, version 1.1 [ 81s] -- Found glib-2.0, version 2.70.0 [ 81s] CMake Deprecation Warning at hw/display/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 81s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 81s] CMake. [ 81s] [ 81s] Update the VERSION argument value or use a ... suffix to tell [ 81s] CMake that the project does not need compatibility with older versions. [ 81s] [ 81s] [ 81s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 81s] -- Found hal-backend-device-common, version 1.1 [ 82s] -- Found libsyscommon, version 4.1 [ 82s] CMake Deprecation Warning at hw/led/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 82s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 82s] CMake. [ 82s] [ 82s] Update the VERSION argument value or use a ... suffix to tell [ 82s] CMake that the project does not need compatibility with older versions. [ 82s] [ 82s] [ 82s] -- Checking for module 'hal-backend-device-common' [ 82s] -- Found hal-backend-device-common, version 1.1 [ 83s] CMake Deprecation Warning at hw/external_connection/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 83s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 83s] CMake. [ 83s] [ 83s] Update the VERSION argument value or use a ... suffix to tell [ 83s] CMake that the project does not need compatibility with older versions. [ 83s] [ 83s] [ 83s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 83s] -- Found hal-backend-device-common, version 1.1 [ 84s] -- Found glib-2.0, version 2.70.0 [ 84s] CMake Deprecation Warning at hw/touchscreen/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 84s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 84s] CMake. [ 84s] [ 84s] Update the VERSION argument value or use a ... suffix to tell [ 84s] CMake that the project does not need compatibility with older versions. [ 84s] [ 84s] [ 84s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 84s] -- Found hal-backend-device-common, version 1.1 [ 85s] -- Found libsyscommon, version 4.1 [ 85s] CMake Deprecation Warning at hw/ir/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 85s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 85s] CMake. [ 85s] [ 85s] Update the VERSION argument value or use a ... suffix to tell [ 85s] CMake that the project does not need compatibility with older versions. [ 85s] [ 85s] [ 85s] CMake Deprecation Warning at hw/thermal/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 85s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 85s] CMake. [ 85s] [ 85s] Update the VERSION argument value or use a ... suffix to tell [ 85s] CMake that the project does not need compatibility with older versions. [ 85s] [ 85s] [ 85s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 85s] -- Found hal-backend-device-common, version 1.1 [ 86s] -- Found glib-2.0, version 2.70.0 [ 86s] CMake Deprecation Warning at hw/usb_gadget/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 86s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 86s] CMake. [ 86s] [ 86s] Update the VERSION argument value or use a ... suffix to tell [ 86s] CMake that the project does not need compatibility with older versions. [ 86s] [ 86s] [ 86s] -- Checking for module 'hal-backend-device-common' [ 86s] -- Found hal-backend-device-common, version 1.1 [ 87s] CMake Deprecation Warning at hw/board/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 87s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 87s] CMake. [ 87s] [ 87s] Update the VERSION argument value or use a ... suffix to tell [ 87s] CMake that the project does not need compatibility with older versions. [ 87s] [ 87s] [ 87s] -- Checking for module 'hal-backend-device-common' [ 87s] -- Found hal-backend-device-common, version 1.1 [ 87s] CMake Deprecation Warning at hw/haptic/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 87s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 87s] CMake. [ 87s] [ 87s] Update the VERSION argument value or use a ... suffix to tell [ 87s] CMake that the project does not need compatibility with older versions. [ 87s] [ 87s] [ 88s] -- Checking for modules 'hal-backend-device-common;glib-2.0;libsyscommon' [ 88s] -- Found hal-backend-device-common, version 1.1 [ 88s] -- Found glib-2.0, version 2.70.0 [ 88s] -- Found libsyscommon, version 4.1 [ 89s] CMake Deprecation Warning at hw/memory/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 89s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 89s] CMake. [ 89s] [ 89s] Update the VERSION argument value or use a ... suffix to tell [ 89s] CMake that the project does not need compatibility with older versions. [ 89s] [ 89s] [ 89s] -- Checking for module 'dlog' [ 89s] -- Found dlog, version 1.0 [ 90s] -- Configuring done [ 90s] -- Generating done [ 90s] CMake Warning: [ 90s] Manually-specified variables were not used by the project: [ 90s] [ 90s] CMAKE_INSTALL_LIBDIR [ 90s] INCLUDE_INSTALL_DIR [ 90s] LIB_INSTALL_DIR [ 90s] SHARE_INSTALL_PREFIX [ 90s] SYSCONF_INSTALL_DIR [ 90s] [ 90s] [ 90s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1 [ 90s] + make -j4 [ 90s] [ 4%] Building C object hw/battery/CMakeFiles/hal-backend-device-battery.dir/battery.c.o [ 90s] [ 9%] Building C object hw/display/CMakeFiles/hal-backend-device-display.dir/display.c.o [ 90s] [ 13%] Building C object hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/external_connection.c.o [ 90s] [ 18%] Building C object hw/led/CMakeFiles/hal-backend-device-led.dir/led.c.o [ 90s] [ 22%] Linking C shared module libhal-backend-device-battery.so [ 90s] [ 31%] Linking C shared module libhal-backend-device-external-connection.so [ 90s] [ 31%] Linking C shared module libhal-backend-device-led.so [ 90s] [ 36%] Linking C shared module libhal-backend-device-display.so [ 90s] [ 36%] Built target hal-backend-device-led [ 90s] [ 36%] Built target hal-backend-device-battery [ 90s] [ 36%] Built target hal-backend-device-external-connection [ 90s] [ 45%] Building C object hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o [ 90s] [ 45%] Building C object hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o [ 90s] [ 50%] Building C object hw/ir/CMakeFiles/hal-backend-device-ir.dir/ir.c.o [ 90s] [ 50%] Built target hal-backend-device-display [ 91s] [ 54%] Linking C shared module libhal-backend-device-ir.so [ 91s] [ 59%] Building C object hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o [ 91s] [ 63%] Linking C shared module libhal-backend-device-touchscreen.so [ 91s] [ 68%] Linking C shared module libhal-backend-device-thermal.so [ 91s] [ 68%] Built target hal-backend-device-ir [ 91s] [ 72%] Linking C shared module libhal-backend-device-usb-gadget.so [ 91s] [ 72%] Built target hal-backend-device-touchscreen [ 91s] [ 77%] Building C object hw/board/CMakeFiles/hal-backend-device-board.dir/board.c.o [ 91s] [ 77%] Built target hal-backend-device-thermal [ 91s] [ 77%] Built target hal-backend-device-usb-gadget [ 91s] [ 81%] Building C object hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/standard.c.o [ 91s] [ 86%] Building C object hw/memory/CMakeFiles/hal-backend-device-memory.dir/memory.c.o [ 91s] [ 90%] Linking C shared module libhal-backend-device-board.so [ 91s] [ 95%] Linking C shared module libhal-backend-device-memory.so [ 91s] [ 95%] Built target hal-backend-device-board [ 91s] [ 95%] Built target hal-backend-device-memory [ 91s] [100%] Linking C shared module libhal-backend-device-haptic.so [ 91s] [100%] Built target hal-backend-device-haptic [ 91s] + exit 0 [ 91s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.KsFQ2G [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd hal-backend-device-tm1-0.0.1 [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm [ 91s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm [ 91s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/usr/lib/udev/rules.d [ 91s] + install -m 644 rules/61-video.rules /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/usr/lib/udev/rules.d [ 91s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm install [ 91s] Consolidate compiler generated dependencies of target hal-backend-device-battery [ 91s] [ 9%] Built target hal-backend-device-battery [ 91s] Consolidate compiler generated dependencies of target hal-backend-device-display [ 91s] [ 18%] Built target hal-backend-device-display [ 91s] Consolidate compiler generated dependencies of target hal-backend-device-led [ 92s] [ 27%] Built target hal-backend-device-led [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-external-connection [ 92s] [ 36%] Built target hal-backend-device-external-connection [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-touchscreen [ 92s] [ 45%] Built target hal-backend-device-touchscreen [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-ir [ 92s] [ 54%] Built target hal-backend-device-ir [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-thermal [ 92s] [ 63%] Built target hal-backend-device-thermal [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-usb-gadget [ 92s] [ 72%] Built target hal-backend-device-usb-gadget [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-board [ 92s] [ 81%] Built target hal-backend-device-board [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-haptic [ 92s] [ 90%] Built target hal-backend-device-haptic [ 92s] Consolidate compiler generated dependencies of target hal-backend-device-memory [ 92s] [100%] Built target hal-backend-device-memory [ 92s] Install the project... [ 92s] -- Install configuration: "" [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/share/licenses/hal-backend-device-tm1/LICENSE.Apache-2.0 [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-battery.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-display.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-led.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-external-connection.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-touchscreen.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-ir.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-thermal.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-usb-gadget.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-board.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-haptic.so [ 92s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-memory.so [ 92s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/usr/share/info/dir [ 92s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm -regex '.*\.la$' [ 92s] + xargs rm -f -- [ 92s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm -regex '.*\.a$' [ 92s] + xargs rm -f -- [ 92s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.0.1-6.4 --unique-debug-src-base hal-backend-device-tm1-0.0.1-6.4.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1 [ 94s] 1+0 records in [ 94s] 1+0 records out [ 94s] 7 bytes (7 B) copied1+0 records in [ 94s] 1+0 records out [ 94s] , 0.000573006 s, 12.2 kB/s [ 94s] 7 bytes (7 B) copied1+0 records in [ 94s] 1+0 records out [ 94s] 1+0 records in [ 94s] 1+0 records out [ 94s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000562014 s, 12.5 kB/s [ 94s] , 0.000644904 s, 10.9 kB/s [ 94s] , 0.000569245 s, 12.3 kB/s [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-battery.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-board.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-external-connection.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-display.so [ 94s] 1+0 records in [ 94s] 1+0 records out [ 94s] 7 bytes (7 B) copied1+0 records in [ 94s] 1+0 records out [ 94s] , 0.000624236 s, 11.2 kB/s [ 94s] 7 bytes (7 B) copied1+0 records in [ 94s] 1+0 records out [ 94s] 1+0 records in [ 94s] 1+0 records out [ 94s] , 0.000577778 s, 12.1 kB/s [ 94s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000606554 s, 11.5 kB/s [ 94s] , 0.000570522 s, 12.3 kB/s [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-haptic.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-ir.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-led.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-memory.so [ 94s] 1+0 records in [ 94s] 1+0 records out [ 94s] 7 bytes (7 B) copied1+0 records in [ 94s] 1+0 records out [ 94s] 7 bytes (7 B) copied, 0.000574356 s, 12.2 kB/s [ 94s] , 0.000581313 s, 12.0 kB/s [ 94s] 1+0 records in [ 94s] 1+0 records out [ 94s] 0+0 records in [ 94s] 0+0 records out [ 94s] 7 bytes (7 B) copied0 bytes (0 B) copied, 0.00042035 s, 0.0 kB/s [ 94s] , 0.000564571 s, 12.4 kB/s [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-thermal.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-touchscreen.so [ 94s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm/hal/lib/libhal-backend-device-usb-gadget.so [ 94s] 0+0 records in [ 94s] 0+0 records out [ 94s] 0 bytes (0 B) copied0+0 records in [ 94s] 0+0 records out [ 94s] 0 bytes (0 B) copied, 0.000416669 s, 0.0 kB/s [ 94s] , 0.000413177 s, 0.0 kB/s [ 94s] 0+0 records in [ 94s] 0+0 records out [ 94s] 0 bytes (0 B) copied, 0.000412179 s, 0.0 kB/s [ 94s] 98 blocks [ 94s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1/hal-backend-device-tm1-debuginfo.manifest [ 94s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1/hal-backend-device-tm1-debugsource.manifest [ 94s] + /usr/lib/rpm/check-buildroot [ 95s] + /usr/lib/rpm//brp-compress [ 95s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 95s] + /usr/lib/rpm/brp-python-hardlink [ 95s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm [ 95s] Processing files: hal-backend-device-tm1-0.0.1-6.4.armv7hl [ 95s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 95s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 95s] [ 95s] Provides: hal-backend-device-tm1 = 0.0.1-6.4 hal-backend-device-tm1(armv7hl-32) = 0.0.1-6.4 libhal-backend-device-battery.so libhal-backend-device-board.so libhal-backend-device-display.so libhal-backend-device-external-connection.so libhal-backend-device-haptic.so libhal-backend-device-ir.so libhal-backend-device-led.so libhal-backend-device-memory.so libhal-backend-device-thermal.so libhal-backend-device-touchscreen.so libhal-backend-device-usb-gadget.so [ 95s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 95s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 95s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 95s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 95s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libhal-backend-device-common.so libsyscommon.so.4.1 libudev.so.1 libudev.so.1(LIBUDEV_183) rtld(GNU_HASH) [ 95s] Processing files: hal-backend-device-tm1-debugsource-0.0.1-6.4.armv7hl [ 95s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 95s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 95s] [ 95s] Provides: hal-backend-device-tm1-debugsource = 0.0.1-6.4 hal-backend-device-tm1-debugsource(armv7hl-32) = 0.0.1-6.4 [ 95s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 95s] Processing files: hal-backend-device-tm1-debuginfo-0.0.1-6.4.armv7hl [ 95s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 95s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 95s] [ 95s] Provides: hal-backend-device-tm1-debuginfo = 0.0.1-6.4 hal-backend-device-tm1-debuginfo(armv7hl-32) = 0.0.1-6.4 [ 95s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 95s] Recommends: hal-backend-device-tm1-debugsource(armv7hl-32) = 0.0.1-6.4 [ 95s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm [ 95s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-tm1-0.0.1-6.4.src.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-0.0.1-6.4.armv7hl.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-debugsource-0.0.1-6.4.armv7hl.rpm [ 96s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-device-tm1-debuginfo-0.0.1-6.4.armv7hl.rpm [ 96s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yVgQPJ [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd hal-backend-device-tm1-0.0.1 [ 96s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-6.4.arm [ 96s] + exit 0 [ 96s] ... checking for files with abuild user/group [ 96s] ... creating baselibs [ 97s] [ 97s] obsnw04 finished "build hal-backend-device-tm1.spec" at Fri May 6 06:11:10 UTC 2022. [ 97s] Retried build at Tue May 17 08:04:15 2022 returned same result, skipped