[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw03 started "build _service:gbs:hal-backend-sensor-rpi.spec" at Fri May 6 06:08:12 UTC 2022. [ 0s] [ 0s] Building hal-backend-sensor-rpi for project 'Tizen:Unified' repository 'standard' arch 'armv7hl' srcmd5 '0125c57733e6324f960319a14badd1db' [ 0s] [ 0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:hal-backend-sensor-rpi.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:hal-backend-sensor-rpi.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:hal-backend-sensor-rpi.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/3/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 6s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7hl postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: gio-branding-upstream -> libgio [ 9s] breaking dependency libgio -> gio-branding-upstream [ 9s] cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 10s] [1/139] installing dlog-config-persistent-logs-7.0.3-127.3 [ 10s] [2/139] installing libmagic-data-5.41-6.305 [ 10s] [3/139] installing setup-0.9-6.8 [ 10s] [4/139] installing filesystem-3.1-4.1 [ 10s] [5/139] installing glibc-2.30-14.2 [ 10s] [6/139] installing libatomic-9.2.0-16.2 [ 11s] [7/139] installing libgcc-9.2.0-16.2 [ 11s] [8/139] installing bash-3.2.57-5.1 [ 11s] [9/139] installing capi-base-common-0.4.70-54.2 [ 11s] [10/139] installing cpio-2.8-5.3 [ 11s] [11/139] installing diffutils-3.3-4.3 [ 12s] [12/139] installing findutils-4.3.8-5.372 [ 12s] [13/139] installing gdbm-1.8.3-3.672 [ 12s] [14/139] installing hostname-3.23-3.3 [ 12s] [15/139] installing iniparser-4.1-1.1 [ 12s] [16/139] installing libattr-2.5.1-5.363 [ 13s] [17/139] installing libblkid-2.37.4-12.5 [ 13s] [18/139] installing libbz2-1.0.8-5.235 [ 13s] [19/139] installing libcap-2.24-4.358 [ 13s] [20/139] installing libexpat-2.4.1-4.313 [ 14s] [21/139] installing libext2fs-1.46.0-4.43 [ 14s] [22/139] installing libffi-3.3-5.383 [ 14s] [23/139] installing libfreebl3-3.34.1-3.487 [ 15s] [24/139] installing libgfortran-9.2.0-16.2 [ 16s] [25/139] installing libgomp-9.2.0-16.2 [ 16s] [26/139] installing libitm-9.2.0-16.2 [ 16s] [27/139] installing libltdl-2.4.6-4.44 [ 17s] [28/139] installing liblua-5.1.5-3.334 [ 17s] [29/139] installing liblzma-5.2.5-5.298 [ 17s] [30/139] installing libopenssl11-1.1.1l-6.217 [ 18s] [31/139] installing libpcre-8.45-5.6 [ 18s] [32/139] installing libpopt-1.16-3.621 [ 18s] [33/139] installing libpython3_91_0-3.9.10-11.10 [ 19s] [34/139] installing libsmack-1.3.1-4.349 [ 19s] [35/139] installing libsmartcols-2.37.4-12.5 [ 19s] [36/139] installing libsqlite-3.37.2-5.35 [ 20s] [37/139] installing libstdc++-9.2.0-16.2 [ 20s] [38/139] installing libuuid-2.37.4-12.5 [ 21s] [39/139] installing libzstd1-1.4.5-2.199 [ 23s] [40/139] installing m4-1.4.19-4.2 [ 23s] [41/139] installing net-tools-2.0_20121208git-4.4 [ 23s] [42/139] installing nspr-4.12-3.614 [ 23s] [43/139] installing patch-2.7.6-8.12 [ 23s] [44/139] installing pkg-config-0.29.2-4.30 [ 23s] [45/139] installing sed-4.1c-4.2 [ 23s] [46/139] installing update-alternatives-1.20.5-3.4 [ 23s] [47/139] installing which-2.17-4.4 [ 23s] [48/139] installing zlib-1.2.11-3.651 [ 24s] [49/139] installing shadow-utils-4.1.4.2-3.46 [ 24s] [50/139] installing build-compare-2015.04.28-3.228 [ 24s] [51/139] installing libstdc++-devel-9.2.0-16.2 [ 24s] [52/139] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 28s] [53/139] installing terminfo-base-full-6.2-7.281 [ 29s] [54/139] installing capi-base-common-devel-0.4.70-54.2 [ 29s] [55/139] installing cpp-9.2.0-16.2 [ 29s] [56/139] installing gcc-c++-9.2.0-16.2 [ 30s] [57/139] installing libblkid-devel-2.37.4-12.5 [ 30s] [58/139] installing libffi-devel-3.3-5.383 [ 30s] [59/139] installing binutils-2.33.1-9.253 [ 31s] [60/139] installing coreutils-6.9-5.128 [ 31s] [61/139] installing gawk-3.1.5-4.4 [ 31s] [62/139] installing grep-2.5.2-3.4 [ 31s] [63/139] installing gtest-1.11.0-8.2 [ 31s] [64/139] installing libacl-2.2.53-4.576 [ 32s] [65/139] installing libcap-tools-2.24-4.358 [ 32s] [66/139] installing libcc1-9.2.0-16.2 [ 32s] [67/139] installing libelf-0.178-4.81 [ 32s] [68/139] installing libglib-2.70.0-33.85 [ 33s] [69/139] installing libmount-2.37.4-12.5 [ 33s] [70/139] installing libpcreposix-8.45-5.6 [ 33s] [71/139] installing libubsan-9.2.0-16.2 [ 35s] [72/139] installing make-4.3-3.13 [ 36s] [73/139] installing nss-certs-3.34.1-3.487 [ 37s] [74/139] installing smack-1.3.1-4.349 [ 37s] [75/139] installing bzip2-1.0.8-5.235 [ 38s] [76/139] installing libfdisk-2.37.4-12.5 [ 40s] [77/139] installing libmagic-5.41-6.305 [ 40s] [78/139] installing libpcrecpp-8.45-5.6 [ 41s] [79/139] installing libxml2-2.9.12-7.154 [ 41s] [80/139] installing perl-5.34.0-7.23 [ 43s] [81/139] installing xz-5.2.5-5.298 [ 43s] [82/139] installing dlog-7.0.3-127.3 [ 44s] [83/139] installing build-mkbaselibs-20120927-3.3 [ 44s] [84/139] installing gtest-devel-1.11.0-8.2 [ 44s] [85/139] installing linux-glibc-devel-3.10-4.479 [ 44s] [86/139] installing autoconf-2.71-6.45 [ 45s] [87/139] installing dlog-logger-7.0.3-127.3 [ 45s] [88/139] installing file-5.41-6.305 [ 45s] [89/139] installing glibc-locale-2.30-14.2 [ 46s] [90/139] installing libgmodule-2.70.0-33.85 [ 46s] [91/139] installing libgthread-2.70.0-33.85 [ 46s] [92/139] installing libmount-devel-2.37.4-12.5 [ 46s] [93/139] installing tar-1.17-3.4 [ 46s] [94/139] installing gzip-1.3.12-3.627 [ 46s] [95/139] installing libgobject-2.70.0-33.85 [ 47s] [96/139] installing libncurses6-6.2-7.281 [ 47s] [97/139] installing pam-1.1.6-4.2 [ 47s] [98/139] installing tzdata-2021e-5.1 [ 48s] [99/139] installing libdw-0.178-4.81 [ 48s] [100/139] installing pcre-devel-8.45-5.6 [ 48s] [101/139] installing security-config-1.0-162.2 [ 58s] groupadd: group 'dbus' already exists [ 58s] groupadd: group 'priv_appdebugging' already exists [ 58s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 58s] [102/139] installing libarchive-3.5.2-3.107 [ 58s] [103/139] installing shared-mime-info-1.7-5.24 [ 64s] [104/139] installing gcc-9.2.0-16.2 [ 65s] [105/139] installing libncurses-6.2-7.281 [ 65s] [106/139] installing glibc-devel-2.30-14.2 [ 65s] [107/139] installing qemu-accel-x86_64-armv7hl-0.4-10.1 [ 72s] [108/139] installing automake-1.16.4-6.41 [ 72s] [109/139] installing less-466-3.4 [ 72s] [110/139] installing libreadline-5.2-3.212 [ 73s] [111/139] installing procps-ng-3.3.17-4.1 [ 73s] [112/139] installing libasm-0.178-4.81 [ 74s] [113/139] installing build-20120927-3.3 [ 74s] [114/139] installing libsystemd-244-94.2 [ 74s] [115/139] installing libdlog-7.0.3-127.3 [ 74s] [116/139] installing cmake-3.21.3-6.11 [ 75s] [117/139] installing libdlog-devel-7.0.3-127.3 [ 75s] [118/139] installing zlib-devel-1.2.11-3.651 [ 75s] [119/139] installing libtool-2.4.6-4.44 [ 76s] [120/139] installing elfutils-0.178-4.81 [ 76s] [121/139] installing capi-system-info-0.5.2-31.2 [ 76s] Running capi-system-info %posttrans script [ 76s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 76s] iniparser: cannot open /etc/info.ini [ 76s] [122/139] installing python3-base-3.9.10-11.10 [ 77s] [123/139] installing util-linux-2.37.4-12.5 [ 77s] [124/139] installing python3-3.9.10-11.9 [ 77s] [125/139] installing util-linux-su-2.37.4-12.5 [ 77s] [126/139] installing capi-system-peripheral-io-0.3.1-32.2 [ 78s] [127/139] installing capi-system-peripheral-io-devel-0.3.1-32.2 [ 78s] [128/139] installing nss-3.34.1-3.487 [ 78s] [129/139] installing libgio-2.70.0-33.85 [ 78s] [130/139] installing gio-branding-upstream-2.70.0-33.85 [ 78s] [131/139] installing hal-api-common-0.0.1-33.2 [ 78s] [132/139] installing libsoftokn3-3.34.1-3.487 [ 79s] [133/139] installing glib2-tools-2.70.0-33.85 [ 79s] [134/139] installing rpm-4.14.1.1-9.119 [ 79s] [135/139] installing hal-api-common-devel-0.0.1-33.2 [ 79s] [136/139] installing hal-api-sensor-0.0.1-16.2 [ 80s] [137/139] installing glib2-devel-2.70.0-33.85 [ 80s] [138/139] installing rpm-build-4.14.1.1-9.119 [ 80s] [139/139] installing hal-api-sensor-devel-0.0.1-16.2 [ 80s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 80s] now finalizing build dir... [ 81s] Running build time source services... [ 81s] build target is armv7hl-tizen-linux [ 81s] ----------------------------------------------------------------- [ 81s] I have the following modifications for hal-backend-sensor-rpi.spec: [ 81s] 5c5 [ 81s] < Release: 0 [ 81s] --- [ 81s] > Release: 7.2 [ 81s] ----------------------------------------------------------------- [ 81s] ----- building hal-backend-sensor-rpi.spec (user abuild) [ 81s] ----------------------------------------------------------------- [ 81s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/0125c57733e6324f960319a14badd1db-hal-backend-sensor-rpi' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-sensor-rpi.spec [ 81s] Building target platforms: armv7hl-tizen-linux [ 81s] Building for target armv7hl-tizen-linux [ 81s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.lWlyHx [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + rm -rf hal-backend-sensor-rpi-1.0.4 [ 81s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-sensor-rpi-1.0.4.tar.gz [ 81s] + /bin/tar -xof - [ 81s] + STATUS=0 [ 81s] + '[' 0 -ne 0 ']' [ 81s] + cd hal-backend-sensor-rpi-1.0.4 [ 81s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 81s] + exit 0 [ 81s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.X6kJXy [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd hal-backend-sensor-rpi-1.0.4 [ 82s] ++ uname -m [ 82s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 82s] + LANG=C [ 82s] + export LANG [ 82s] + unset DISPLAY [ 82s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 82s] + export CFLAGS [ 82s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 82s] + export CXXFLAGS [ 82s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 82s] + export FFLAGS [ 82s] + LDFLAGS= [ 82s] + export LDFLAGS [ 82s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 82s] + export CFLAGS [ 82s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 82s] + export CXXFLAGS [ 82s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 82s] + export FFLAGS [ 82s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DCMAKE_HAL_LIBDIR_PREFIX=/hal/lib -DCMAKE_HAL_LICENSEDIR_PREFIX=/hal/share/licenses [ 82s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 82s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 82s] CMake. [ 82s] [ 82s] Update the VERSION argument value or use a ... suffix to tell [ 82s] CMake that the project does not need compatibility with older versions. [ 82s] [ 82s] [ 82s] -- The CXX compiler identification is GNU 9.2.0 [ 82s] -- Detecting CXX compiler ABI info [ 82s] -- Detecting CXX compiler ABI info - done [ 82s] -- Check for working CXX compiler: /bin/c++ - skipped [ 82s] -- Detecting CXX compile features [ 82s] -- Detecting CXX compile features - done [ 82s] CMake Deprecation Warning at src/accelerometer/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 82s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 82s] CMake. [ 82s] [ 82s] Update the VERSION argument value or use a ... suffix to tell [ 82s] CMake that the project does not need compatibility with older versions. [ 82s] [ 82s] [ 82s] -- Found PkgConfig: /bin/pkg-config (found version "0.29.2") [ 82s] -- Checking for modules 'glib-2.0;dlog;capi-system-peripheral-io' [ 82s] -- Found glib-2.0, version 2.70.0 [ 82s] -- Found dlog, version 1.0 [ 83s] -- Found capi-system-peripheral-io, version 0.0.1 [ 83s] CMake Deprecation Warning at src/gyroscope/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 83s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 83s] CMake. [ 83s] [ 83s] Update the VERSION argument value or use a ... suffix to tell [ 83s] CMake that the project does not need compatibility with older versions. [ 83s] [ 83s] [ 83s] -- Checking for modules 'glib-2.0;dlog;capi-system-peripheral-io' [ 83s] -- Found glib-2.0, version 2.70.0 [ 83s] -- Found dlog, version 1.0 [ 84s] -- Found capi-system-peripheral-io, version 0.0.1 [ 84s] CMake Deprecation Warning at src/magnetometer/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 84s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 84s] CMake. [ 84s] [ 84s] Update the VERSION argument value or use a ... suffix to tell [ 84s] CMake that the project does not need compatibility with older versions. [ 84s] [ 84s] [ 84s] -- Checking for modules 'glib-2.0;dlog;capi-system-peripheral-io' [ 84s] -- Found glib-2.0, version 2.70.0 [ 85s] -- Found dlog, version 1.0 [ 85s] -- Found capi-system-peripheral-io, version 0.0.1 [ 85s] -- Configuring done [ 85s] -- Generating done [ 85s] CMake Warning: [ 85s] Manually-specified variables were not used by the project: [ 85s] [ 85s] INCLUDE_INSTALL_DIR [ 85s] LIB_INSTALL_DIR [ 85s] SHARE_INSTALL_PREFIX [ 85s] SYSCONF_INSTALL_DIR [ 85s] [ 85s] [ 85s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 [ 85s] + make -j4 [ 85s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 -B/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 --check-build-system CMakeFiles/Makefile.cmake 0 [ 85s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4//CMakeFiles/progress.marks [ 85s] make -f CMakeFiles/Makefile2 all [ 85s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] make -f src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/build.make src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/depend [ 85s] make -f src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/build.make src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/depend [ 85s] make -f src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/build.make src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/depend [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/DependInfo.cmake --color= [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/DependInfo.cmake --color= [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/DependInfo.cmake --color= [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] make -f src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/build.make src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/build [ 85s] make -f src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/build.make src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/build [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] make -f src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/build.make src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/build [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 85s] [ 6%] Building CXX object src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/__/sensor_update_event.cpp.o [ 85s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope && /bin/c++ -Dhal_backend_sensor_gyro_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/__/sensor_update_event.cpp.o -MF CMakeFiles/hal-backend-sensor-gyro.dir/__/sensor_update_event.cpp.o.d -o CMakeFiles/hal-backend-sensor-gyro.dir/__/sensor_update_event.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/sensor_update_event.cpp [ 85s] [ 20%] Building CXX object src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/__/sensor_update_event.cpp.o [ 85s] [ 20%] Building CXX object src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/__/sensor_update_event.cpp.o [ 85s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer && /bin/c++ -Dhal_backend_sensor_magnet_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/__/sensor_update_event.cpp.o -MF CMakeFiles/hal-backend-sensor-magnet.dir/__/sensor_update_event.cpp.o.d -o CMakeFiles/hal-backend-sensor-magnet.dir/__/sensor_update_event.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/sensor_update_event.cpp [ 85s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer && /bin/c++ -Dhal_backend_sensor_accel_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/__/sensor_update_event.cpp.o -MF CMakeFiles/hal-backend-sensor-accel.dir/__/sensor_update_event.cpp.o.d -o CMakeFiles/hal-backend-sensor-accel.dir/__/sensor_update_event.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/sensor_update_event.cpp [ 85s] [ 26%] Building CXX object src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/__/util.cpp.o [ 85s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer && /bin/c++ -Dhal_backend_sensor_accel_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/__/util.cpp.o -MF CMakeFiles/hal-backend-sensor-accel.dir/__/util.cpp.o.d -o CMakeFiles/hal-backend-sensor-accel.dir/__/util.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/util.cpp [ 86s] [ 33%] Building CXX object src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/accel_device.cpp.o [ 86s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer && /bin/c++ -Dhal_backend_sensor_accel_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/accel_device.cpp.o -MF CMakeFiles/hal-backend-sensor-accel.dir/accel_device.cpp.o.d -o CMakeFiles/hal-backend-sensor-accel.dir/accel_device.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer/accel_device.cpp [ 86s] [ 40%] Building CXX object src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/__/util.cpp.o [ 86s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer && /bin/c++ -Dhal_backend_sensor_magnet_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/__/util.cpp.o -MF CMakeFiles/hal-backend-sensor-magnet.dir/__/util.cpp.o.d -o CMakeFiles/hal-backend-sensor-magnet.dir/__/util.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/util.cpp [ 86s] [ 46%] Building CXX object src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/__/util.cpp.o [ 86s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope && /bin/c++ -Dhal_backend_sensor_gyro_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/__/util.cpp.o -MF CMakeFiles/hal-backend-sensor-gyro.dir/__/util.cpp.o.d -o CMakeFiles/hal-backend-sensor-gyro.dir/__/util.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/util.cpp [ 86s] [ 53%] Building CXX object src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/hal-backend-sensor-accel.cpp.o [ 86s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer && /bin/c++ -Dhal_backend_sensor_accel_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/hal-backend-sensor-accel.cpp.o -MF CMakeFiles/hal-backend-sensor-accel.dir/hal-backend-sensor-accel.cpp.o.d -o CMakeFiles/hal-backend-sensor-accel.dir/hal-backend-sensor-accel.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer/hal-backend-sensor-accel.cpp [ 86s] /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer/hal-backend-sensor-accel.cpp:42:24: warning: 'hal_backend_sensor_data' initialized and declared 'extern' [ 86s] 42 | extern "C" hal_backend hal_backend_sensor_data = { [ 86s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 87s] [ 60%] Building CXX object src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/hal-backend-sensor-magnet.cpp.o [ 87s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer && /bin/c++ -Dhal_backend_sensor_magnet_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/hal-backend-sensor-magnet.cpp.o -MF CMakeFiles/hal-backend-sensor-magnet.dir/hal-backend-sensor-magnet.cpp.o.d -o CMakeFiles/hal-backend-sensor-magnet.dir/hal-backend-sensor-magnet.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer/hal-backend-sensor-magnet.cpp [ 87s] [ 66%] Linking CXX shared library libhal-backend-sensor-accel.so [ 87s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-sensor-accel.dir/link.txt --verbose=1 [ 87s] /bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -shared -Wl,-soname,libhal-backend-sensor-accel.so -o libhal-backend-sensor-accel.so CMakeFiles/hal-backend-sensor-accel.dir/__/sensor_update_event.cpp.o CMakeFiles/hal-backend-sensor-accel.dir/__/util.cpp.o CMakeFiles/hal-backend-sensor-accel.dir/accel_device.cpp.o CMakeFiles/hal-backend-sensor-accel.dir/hal-backend-sensor-accel.cpp.o -lglib-2.0 -ldlog -lcapi-system-peripheral-io -lcapi-base-common [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 87s] [ 66%] Built target hal-backend-sensor-accel [ 87s] [ 73%] Building CXX object src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/magnet_device.cpp.o [ 87s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer && /bin/c++ -Dhal_backend_sensor_magnet_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/magnet_device.cpp.o -MF CMakeFiles/hal-backend-sensor-magnet.dir/magnet_device.cpp.o.d -o CMakeFiles/hal-backend-sensor-magnet.dir/magnet_device.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer/magnet_device.cpp [ 87s] /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer/hal-backend-sensor-magnet.cpp:42:24: warning: 'hal_backend_sensor_data' initialized and declared 'extern' [ 87s] 42 | extern "C" hal_backend hal_backend_sensor_data = { [ 87s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 87s] [ 80%] Building CXX object src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/gyro_device.cpp.o [ 87s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope && /bin/c++ -Dhal_backend_sensor_gyro_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/gyro_device.cpp.o -MF CMakeFiles/hal-backend-sensor-gyro.dir/gyro_device.cpp.o.d -o CMakeFiles/hal-backend-sensor-gyro.dir/gyro_device.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope/gyro_device.cpp [ 87s] [ 86%] Building CXX object src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/hal-backend-sensor-gyro.cpp.o [ 87s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope && /bin/c++ -Dhal_backend_sensor_gyro_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -fPIC -MD -MT src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/hal-backend-sensor-gyro.cpp.o -MF CMakeFiles/hal-backend-sensor-gyro.dir/hal-backend-sensor-gyro.cpp.o.d -o CMakeFiles/hal-backend-sensor-gyro.dir/hal-backend-sensor-gyro.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope/hal-backend-sensor-gyro.cpp [ 87s] /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope/hal-backend-sensor-gyro.cpp:42:24: warning: 'hal_backend_sensor_data' initialized and declared 'extern' [ 87s] 42 | extern "C" hal_backend hal_backend_sensor_data = { [ 87s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 87s] [ 93%] Linking CXX shared library libhal-backend-sensor-magnet.so [ 87s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-sensor-magnet.dir/link.txt --verbose=1 [ 87s] /bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -shared -Wl,-soname,libhal-backend-sensor-magnet.so -o libhal-backend-sensor-magnet.so CMakeFiles/hal-backend-sensor-magnet.dir/__/sensor_update_event.cpp.o CMakeFiles/hal-backend-sensor-magnet.dir/__/util.cpp.o CMakeFiles/hal-backend-sensor-magnet.dir/hal-backend-sensor-magnet.cpp.o CMakeFiles/hal-backend-sensor-magnet.dir/magnet_device.cpp.o -lglib-2.0 -ldlog -lcapi-system-peripheral-io -lcapi-base-common [ 88s] [100%] Linking CXX shared library libhal-backend-sensor-gyro.so [ 88s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-sensor-gyro.dir/link.txt --verbose=1 [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] /bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -O2 -fomit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections -fPIC -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/ -shared -Wl,-soname,libhal-backend-sensor-gyro.so -o libhal-backend-sensor-gyro.so CMakeFiles/hal-backend-sensor-gyro.dir/__/sensor_update_event.cpp.o CMakeFiles/hal-backend-sensor-gyro.dir/__/util.cpp.o CMakeFiles/hal-backend-sensor-gyro.dir/gyro_device.cpp.o CMakeFiles/hal-backend-sensor-gyro.dir/hal-backend-sensor-gyro.cpp.o -lglib-2.0 -ldlog -lcapi-system-peripheral-io -lcapi-base-common [ 88s] [100%] Built target hal-backend-sensor-magnet [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] [100%] Built target hal-backend-sensor-gyro [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/CMakeFiles 0 [ 88s] + exit 0 [ 88s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.K0OpyA [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd hal-backend-sensor-rpi-1.0.4 [ 88s] + LANG=C [ 88s] + export LANG [ 88s] + unset DISPLAY [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm [ 88s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm install [ 88s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 -B/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 --check-build-system CMakeFiles/Makefile.cmake 0 [ 88s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4//CMakeFiles/progress.marks [ 88s] /bin/make -f CMakeFiles/Makefile2 all [ 88s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] /bin/make -f src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/build.make src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/depend [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/DependInfo.cmake --color= [ 88s] Consolidate compiler generated dependencies of target hal-backend-sensor-accel [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] /bin/make -f src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/build.make src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/build [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] make[2]: Nothing to be done for 'src/accelerometer/CMakeFiles/hal-backend-sensor-accel.dir/build'. [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] [ 33%] Built target hal-backend-sensor-accel [ 88s] /bin/make -f src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/build.make src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/depend [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/DependInfo.cmake --color= [ 88s] Consolidate compiler generated dependencies of target hal-backend-sensor-gyro [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] /bin/make -f src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/build.make src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/build [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] make[2]: Nothing to be done for 'src/gyroscope/CMakeFiles/hal-backend-sensor-gyro.dir/build'. [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] [ 66%] Built target hal-backend-sensor-gyro [ 88s] /bin/make -f src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/build.make src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/depend [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] cd /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/DependInfo.cmake --color= [ 88s] Consolidate compiler generated dependencies of target hal-backend-sensor-magnet [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] /bin/make -f src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/build.make src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/build [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] make[2]: Nothing to be done for 'src/magnetometer/CMakeFiles/hal-backend-sensor-magnet.dir/build'. [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] [100%] Built target hal-backend-sensor-magnet [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/CMakeFiles 0 [ 88s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 88s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] make[1]: Nothing to be done for 'preinstall'. [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4' [ 88s] Install the project... [ 88s] /usr/bin/cmake -P cmake_install.cmake [ 88s] -- Install configuration: "" [ 88s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/hal/share/licenses/hal-backend-sensor-rpi/LICENSE.Apache-2.0 [ 88s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/hal/lib/libhal-backend-sensor-accel.so [ 88s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/hal/lib/libhal-backend-sensor-gyro.so [ 88s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/hal/lib/libhal-backend-sensor-magnet.so [ 88s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/usr/share/info/dir [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm -regex '.*\.la$' [ 88s] + xargs rm -f -- [ 88s] + xargs rm -f -- [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm -regex '.*\.a$' [ 88s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 1.0.4-7.2 --unique-debug-src-base hal-backend-sensor-rpi-1.0.4-7.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4 [ 89s] 1+0 records in [ 89s] 1+0 records out [ 89s] 1+0 records in [ 89s] 1+0 records out [ 89s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000569238 s, 12.3 kB/s [ 89s] , 0.000600887 s, 11.6 kB/s [ 89s] 1+0 records in [ 89s] 1+0 records out [ 89s] 7 bytes (7 B) copied, 0.000583426 s, 12.0 kB/s [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/hal/lib/libhal-backend-sensor-magnet.so [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/hal/lib/libhal-backend-sensor-accel.so [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm/hal/lib/libhal-backend-sensor-gyro.so [ 89s] 0+0 records in [ 89s] 0+0 records out [ 89s] 0 bytes (0 B) copied, 0.000427635 s, 0.0 kB/s [ 89s] 0+0 records in [ 89s] 0+0 records out [ 89s] 0 bytes (0 B) copied, 0.000787351 s, 0.0 kB/s [ 89s] 0+0 records in [ 89s] 0+0 records out [ 89s] 0 bytes (0 B) copied, 0.00042976 s, 0.0 kB/s [ 89s] 87 blocks [ 89s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/hal-backend-sensor-rpi-debuginfo.manifest [ 89s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-sensor-rpi-1.0.4/hal-backend-sensor-rpi-debugsource.manifest [ 89s] + /usr/lib/rpm/check-buildroot [ 89s] + /usr/lib/rpm//brp-compress [ 89s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 89s] + /usr/lib/rpm/brp-python-hardlink [ 89s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm [ 89s] Processing files: hal-backend-sensor-rpi-1.0.4-7.2.armv7hl [ 89s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 89s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 89s] [ 89s] Provides: hal-backend-sensor-rpi = 1.0.4-7.2 hal-backend-sensor-rpi(armv7hl-32) = 1.0.4-7.2 libhal-backend-sensor-accel.so libhal-backend-sensor-gyro.so libhal-backend-sensor-magnet.so [ 89s] Requires(interp): /bin/sh /bin/sh [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Requires(post): /bin/sh [ 89s] Requires(postun): /bin/sh [ 89s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcapi-system-peripheral-io.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.14) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 89s] Processing files: hal-backend-sensor-rpi-debugsource-1.0.4-7.2.armv7hl [ 89s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 89s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 89s] [ 90s] Provides: hal-backend-sensor-rpi-debugsource = 1.0.4-7.2 hal-backend-sensor-rpi-debugsource(armv7hl-32) = 1.0.4-7.2 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Processing files: hal-backend-sensor-rpi-debuginfo-1.0.4-7.2.armv7hl [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Provides: hal-backend-sensor-rpi-debuginfo = 1.0.4-7.2 hal-backend-sensor-rpi-debuginfo(armv7hl-32) = 1.0.4-7.2 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Recommends: hal-backend-sensor-rpi-debugsource(armv7hl-32) = 1.0.4-7.2 [ 90s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm [ 90s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-sensor-rpi-1.0.4-7.2.src.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-sensor-rpi-1.0.4-7.2.armv7hl.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-sensor-rpi-debugsource-1.0.4-7.2.armv7hl.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-sensor-rpi-debuginfo-1.0.4-7.2.armv7hl.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.gpBovy [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd hal-backend-sensor-rpi-1.0.4 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-sensor-rpi-1.0.4-7.2.arm [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 91s] [ 91s] obsnw03 finished "build hal-backend-sensor-rpi.spec" at Fri May 6 06:09:43 UTC 2022. [ 91s] Retried build at Tue May 17 08:02:44 2022 returned same result, skipped