[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_6 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obsnw05 started "build _service:gbs:libtdm-sprd.spec" at Mon May 16 14:49:48 UTC 2022. [ 1s] [ 1s] Building libtdm-sprd for project 'Tizen:Unified' repository 'standard' arch 'armv7hl' srcmd5 'a0e9472aee49f97da2e9e0c4d7aca975' [ 1s] [ 1s] processing recipe /var/cache/build/root_6/.build-srcdir/_service:gbs:libtdm-sprd.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_6/.build-srcdir/_service:gbs:libtdm-sprd.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_6/.build.rpmlist /var/cache/build/root_6/.build-srcdir/_service:gbs:libtdm-sprd.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/6/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [28/41] preinstalling coreutils... [ 9s] [29/41] preinstalling libacl... [ 9s] [30/41] preinstalling libelf... [ 9s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 10s] [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-armv7hl postinstall script [ 13s] running setup postinstall script [ 13s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 13s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 13s] initializing rpm db... [ 14s] reordering...cycle: gio-branding-upstream -> libgio [ 14s] breaking dependency libgio -> gio-branding-upstream [ 14s] cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 14s] [1/136] installing dlog-config-persistent-logs-7.0.3-127.3 [ 14s] [2/136] installing kernel-headers-3.10-sc7730-Tizen_sc7730-43.73 [ 14s] [3/136] installing libmagic-data-5.41-6.305 [ 15s] [4/136] installing setup-0.9-6.8 [ 15s] [5/136] installing filesystem-3.1-4.1 [ 15s] [6/136] installing glibc-2.30-14.2 [ 15s] [7/136] installing glibc-devel-2.30-14.2 [ 17s] [8/136] installing libatomic-9.2.0-16.2 [ 17s] [9/136] installing libgcc-9.2.0-16.2 [ 17s] [10/136] installing bash-3.2.57-5.1 [ 17s] [11/136] installing capi-base-common-0.4.70-54.2 [ 18s] [12/136] installing cpio-2.8-5.3 [ 18s] [13/136] installing diffutils-3.3-4.3 [ 18s] [14/136] installing findutils-4.3.8-5.372 [ 18s] [15/136] installing gdbm-1.8.3-3.672 [ 18s] [16/136] installing hostname-3.23-3.3 [ 18s] [17/136] installing iniparser-4.1-1.1 [ 18s] [18/136] installing libattr-2.5.1-5.363 [ 19s] [19/136] installing libblkid-2.37.4-12.5 [ 19s] [20/136] installing libbz2-1.0.8-5.235 [ 19s] [21/136] installing libcap-2.24-4.358 [ 20s] [22/136] installing libdrm-2.4.109-2.1 [ 20s] [23/136] installing libext2fs-1.46.0-4.43 [ 21s] [24/136] installing libffi-3.3-5.383 [ 21s] [25/136] installing libfreebl3-3.34.1-3.487 [ 21s] [26/136] installing libgfortran-9.2.0-16.2 [ 22s] [27/136] installing libgomp-9.2.0-16.2 [ 22s] [28/136] installing libitm-9.2.0-16.2 [ 23s] [29/136] installing libltdl-2.4.6-4.44 [ 23s] [30/136] installing liblua-5.1.5-3.334 [ 24s] [31/136] installing liblzma-5.2.5-5.298 [ 25s] [32/136] installing libopenssl11-1.1.1l-6.217 [ 25s] [33/136] installing libpcre-8.45-5.6 [ 25s] [34/136] installing libpopt-1.16-3.621 [ 26s] [35/136] installing libsmack-1.3.1-4.349 [ 26s] [36/136] installing libsmartcols-2.37.4-12.5 [ 26s] [37/136] installing libsqlite-3.37.2-5.35 [ 27s] [38/136] installing libstdc++-9.2.0-16.2 [ 27s] [39/136] installing libuuid-2.37.4-12.5 [ 27s] [40/136] installing libzstd1-1.4.5-2.199 [ 28s] [41/136] installing m4-1.4.19-4.2 [ 28s] [42/136] installing net-tools-2.0_20121208git-4.4 [ 28s] [43/136] installing nspr-4.12-3.614 [ 28s] [44/136] installing patch-2.7.6-8.12 [ 28s] [45/136] installing pixman-0.38.4-4.10 [ 29s] [46/136] installing pkg-config-0.29.2-4.30 [ 29s] [47/136] installing sed-4.1c-4.2 [ 29s] [48/136] installing update-alternatives-1.20.5-3.4 [ 29s] [49/136] installing which-2.17-4.4 [ 29s] [50/136] installing zlib-1.2.11-3.651 [ 29s] [51/136] installing shadow-utils-4.1.4.2-3.46 [ 29s] [52/136] installing build-compare-2015.04.28-3.228 [ 29s] [53/136] installing libstdc++-devel-9.2.0-16.2 [ 30s] [54/136] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 33s] [55/136] installing terminfo-base-full-6.2-7.281 [ 33s] [56/136] installing capi-base-common-devel-0.4.70-54.2 [ 33s] [57/136] installing cpp-9.2.0-16.2 [ 34s] [58/136] installing gcc-c++-9.2.0-16.2 [ 35s] [59/136] installing pixman-devel-0.38.4-4.10 [ 35s] [60/136] installing binutils-2.33.1-9.253 [ 35s] [61/136] installing coreutils-6.9-5.128 [ 35s] [62/136] installing gawk-3.1.5-4.4 [ 35s] [63/136] installing grep-2.5.2-3.4 [ 35s] [64/136] installing libacl-2.2.53-4.576 [ 36s] [65/136] installing libcc1-9.2.0-16.2 [ 36s] [66/136] installing libelf-0.178-4.81 [ 36s] [67/136] installing libglib-2.70.0-33.85 [ 37s] [68/136] installing libkms-2.4.109-2.1 [ 37s] [69/136] installing libmount-2.37.4-12.5 [ 37s] [70/136] installing libpng-1.6.37-13.6 [ 38s] [71/136] installing libubsan-9.2.0-16.2 [ 38s] [72/136] installing make-4.3-3.13 [ 40s] [73/136] installing nss-certs-3.34.1-3.487 [ 41s] [74/136] installing smack-1.3.1-4.349 [ 41s] [75/136] installing bzip2-1.0.8-5.235 [ 41s] [76/136] installing libfdisk-2.37.4-12.5 [ 42s] [77/136] installing libkmod-29-2.4 [ 42s] [78/136] installing libmagic-5.41-6.305 [ 42s] [79/136] installing libxml2-2.9.12-7.154 [ 43s] [80/136] installing perl-5.34.0-7.23 [ 45s] [81/136] installing xz-5.2.5-5.298 [ 45s] [82/136] installing dlog-7.0.3-127.3 [ 46s] [83/136] installing ttrace-1.1.0-19.6 [ 46s] [84/136] installing build-mkbaselibs-20120927-3.3 [ 46s] [85/136] installing acl-2.2.53-4.576 [ 46s] [86/136] installing autoconf-2.71-6.45 [ 47s] [87/136] installing dlog-logger-7.0.3-127.3 [ 47s] [88/136] installing file-5.41-6.305 [ 47s] [89/136] installing glibc-locale-2.30-14.2 [ 48s] [90/136] installing libdrm-devel-2.4.109-2.1 [ 48s] [91/136] installing libgmodule-2.70.0-33.85 [ 48s] [92/136] installing tar-1.17-3.4 [ 48s] [93/136] installing gzip-1.3.12-3.627 [ 48s] [94/136] installing libgobject-2.70.0-33.85 [ 48s] [95/136] installing libncurses6-6.2-7.281 [ 49s] [96/136] installing pam-1.1.6-4.2 [ 49s] [97/136] installing tzdata-2021e-5.1 [ 50s] [98/136] installing libdw-0.178-4.81 [ 50s] [99/136] installing libarchive-3.5.2-3.107 [ 51s] [100/136] installing shared-mime-info-1.7-5.24 [ 64s] [101/136] installing gcc-9.2.0-16.2 [ 65s] [102/136] installing libncurses-6.2-7.281 [ 65s] [103/136] installing qemu-accel-x86_64-armv7hl-0.4-10.1 [ 86s] [104/136] installing automake-1.16.4-6.41 [ 86s] [105/136] installing less-466-3.4 [ 87s] [106/136] installing libreadline-5.2-3.212 [ 87s] [107/136] installing procps-ng-3.3.17-4.1 [ 87s] [108/136] installing libasm-0.178-4.81 [ 87s] [109/136] installing build-20120927-3.3 [ 87s] [110/136] installing libsystemd-244-94.2 [ 88s] [111/136] installing libdlog-7.0.3-127.3 [ 88s] [112/136] installing libdlog-devel-7.0.3-127.3 [ 88s] [113/136] installing libtool-2.4.6-4.44 [ 88s] [114/136] installing libwayland-client-1.20.0-42.2 [ 89s] [115/136] installing libwayland-server-1.20.0-42.2 [ 89s] [116/136] installing elfutils-0.178-4.81 [ 89s] [117/136] installing util-linux-2.37.4-12.5 [ 89s] [118/136] installing systemd-244-94.2 [ 91s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 91s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 91s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 91s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 91s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 91s] [119/136] installing systemd-devel-244-94.2 [ 91s] [120/136] installing util-linux-su-2.37.4-12.5 [ 91s] [121/136] installing nss-3.34.1-3.487 [ 92s] [122/136] installing libgio-2.70.0-33.85 [ 92s] [123/136] installing gio-branding-upstream-2.70.0-33.85 [ 92s] [124/136] installing hal-api-common-0.0.1-33.2 [ 92s] [125/136] installing libsoftokn3-3.34.1-3.487 [ 92s] [126/136] installing rpm-4.14.1.1-9.119 [ 93s] [127/136] installing hal-api-common-devel-0.0.1-33.2 [ 93s] [128/136] installing hal-api-tbm-0.0.5-5.3 [ 93s] [129/136] installing rpm-build-4.14.1.1-9.119 [ 93s] [130/136] installing hal-api-tbm-devel-0.0.5-5.3 [ 93s] [131/136] installing libtbm-4.1.14-86.5 [ 94s] [132/136] installing libtbm-devel-4.1.14-86.5 [ 94s] [133/136] installing hal-api-tdm-0.1.0-6.2 [ 95s] [134/136] installing hal-api-tdm-devel-0.1.0-6.2 [ 95s] [135/136] installing libtdm-3.1.1-108.2 [ 95s] [136/136] installing libtdm-devel-3.1.1-108.2 [ 95s] removing nis flags from /var/cache/build/root_6/etc/nsswitch.conf... [ 95s] now finalizing build dir... [ 96s] Running build time source services... [ 96s] build target is armv7hl-tizen-linux [ 96s] ----------------------------------------------------------------- [ 96s] I have the following modifications for libtdm-sprd.spec: [ 96s] 4c4 [ 96s] < Release: 0 [ 96s] --- [ 96s] > Release: 45.1 [ 96s] ----------------------------------------------------------------- [ 96s] ----- building libtdm-sprd.spec (user abuild) [ 96s] ----------------------------------------------------------------- [ 96s] ----------------------------------------------------------------- [ 97s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/a0e9472aee49f97da2e9e0c4d7aca975-libtdm-sprd' -ba /home/abuild/rpmbuild/SOURCES/libtdm-sprd.spec [ 97s] Building target platforms: armv7hl-tizen-linux [ 97s] Building for target armv7hl-tizen-linux [ 97s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.98CxVU [ 97s] + umask 022 [ 97s] + cd /home/abuild/rpmbuild/BUILD [ 97s] + cd /home/abuild/rpmbuild/BUILD [ 97s] + rm -rf libtdm-sprd-4.0.9 [ 97s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libtdm-sprd-4.0.9.tar.gz [ 97s] + /bin/tar -xof - [ 97s] + STATUS=0 [ 97s] + '[' 0 -ne 0 ']' [ 97s] + cd libtdm-sprd-4.0.9 [ 97s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 97s] + cp /home/abuild/rpmbuild/SOURCES/libtdm-sprd.manifest . [ 97s] + cp /home/abuild/rpmbuild/SOURCES/libhal-backend-tdm-sprd.manifest . [ 97s] + exit 0 [ 97s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MhfMTW [ 97s] + umask 022 [ 97s] + cd /home/abuild/rpmbuild/BUILD [ 97s] + cd libtdm-sprd-4.0.9 [ 97s] ++ uname -m [ 97s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 97s] + LANG=C [ 97s] + export LANG [ 97s] + unset DISPLAY [ 97s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 97s] + export CFLAGS [ 97s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 97s] + export CXXFLAGS [ 97s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 97s] + export FFLAGS [ 97s] + LDFLAGS= [ 97s] + export LDFLAGS [ 97s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 97s] + export CFLAGS [ 97s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 97s] + export CXXFLAGS [ 97s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 97s] + export FFLAGS [ 97s] + autoreconf -v --install --force [ 97s] autoreconf: export WARNINGS= [ 97s] autoreconf: Entering directory '.' [ 97s] autoreconf: configure.ac: not using Gettext [ 98s] autoreconf: running: aclocal --force [ 102s] autoreconf: configure.ac: tracing [ 103s] autoreconf: running: libtoolize --copy --force [ 105s] libtoolize: putting auxiliary files in '.'. [ 105s] libtoolize: copying file './ltmain.sh' [ 106s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 106s] libtoolize: and rerunning libtoolize and aclocal. [ 106s] libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 106s] autoreconf: configure.ac: not using Intltool [ 106s] autoreconf: configure.ac: not using Gtkdoc [ 106s] autoreconf: running: aclocal --force [ 108s] autoreconf: running: /usr/bin/autoconf --force [ 110s] configure.ac:79: warning: AC_OUTPUT should be used without arguments. [ 110s] configure.ac:79: You should run autoupdate. [ 111s] autoreconf: running: /usr/bin/autoheader --force [ 113s] autoreconf: running: automake --add-missing --copy --force-missing [ 116s] configure.ac:13: installing './compile' [ 116s] configure.ac:21: installing './config.guess' [ 116s] configure.ac:21: installing './config.sub' [ 116s] configure.ac:9: installing './install-sh' [ 116s] configure.ac:9: installing './missing' [ 116s] src/libhal-backend-tdm-sprd/Makefile.am: installing './depcomp' [ 117s] autoreconf: Leaving directory '.' [ 117s] + ./configure --build=armv7hl-tizen-linux-gnueabihf --host=armv7hl-tizen-linux-gnueabihf --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --libdir=/usr/lib --disable-static --with-hal-libdir=/hal/lib 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Werror' 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed' [ 118s] checking for a BSD-compatible install... /bin/install -c [ 118s] checking whether build environment is sane... yes [ 118s] checking for a race-free mkdir -p... /bin/mkdir -p [ 118s] checking for gawk... gawk [ 118s] checking whether make sets $(MAKE)... yes [ 118s] checking whether make supports nested variables... yes [ 118s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 118s] checking for armv7hl-tizen-linux-gnueabihf-gcc... armv7hl-tizen-linux-gnueabihf-gcc [ 118s] checking whether the C compiler works... yes [ 118s] checking for C compiler default output file name... a.out [ 118s] checking for suffix of executables... [ 118s] checking whether we are cross compiling... no [ 118s] checking for suffix of object files... o [ 118s] checking whether the compiler supports GNU C... yes [ 119s] checking whether armv7hl-tizen-linux-gnueabihf-gcc accepts -g... yes [ 119s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to enable C11 features... none needed [ 119s] checking whether armv7hl-tizen-linux-gnueabihf-gcc understands -c and -o together... yes [ 119s] checking whether make supports the include directive... yes (GNU style) [ 119s] checking dependency style of armv7hl-tizen-linux-gnueabihf-gcc... gcc3 [ 119s] checking for stdio.h... yes [ 119s] checking for stdlib.h... yes [ 119s] checking for string.h... yes [ 119s] checking for inttypes.h... yes [ 119s] checking for stdint.h... yes [ 119s] checking for strings.h... yes [ 119s] checking for sys/stat.h... yes [ 119s] checking for sys/types.h... yes [ 119s] checking for unistd.h... yes [ 119s] checking for wchar.h... yes [ 119s] checking for minix/config.h... no [ 120s] checking whether it is safe to define __EXTENSIONS__... yes [ 120s] checking whether _XOPEN_SOURCE should be defined... no [ 120s] checking for special C compiler options needed for large files... no [ 120s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 120s] checking for size_t... yes [ 120s] checking for working alloca.h... yes [ 120s] checking for alloca... yes [ 120s] checking build system type... armv7hl-tizen-linux-gnueabihf [ 120s] checking host system type... armv7hl-tizen-linux-gnueabihf [ 120s] checking how to print strings... printf [ 120s] checking for a sed that does not truncate output... /bin/sed [ 120s] checking for grep that handles long lines and -e... /bin/grep [ 120s] checking for egrep... /bin/grep -E [ 120s] checking for fgrep... /bin/grep -F [ 120s] checking for ld used by armv7hl-tizen-linux-gnueabihf-gcc... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 120s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 120s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 120s] checking the name lister (/bin/nm -B) interface... BSD nm [ 120s] checking whether ln -s works... yes [ 120s] checking the maximum length of command line arguments... 1572864 [ 120s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to armv7hl-tizen-linux-gnueabihf format... func_convert_file_noop [ 120s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to toolchain format... func_convert_file_noop [ 120s] checking for /usr/armv7hl-tizen-linux-gnueabihf/bin/ld option to reload object files... -r [ 120s] checking for armv7hl-tizen-linux-gnueabihf-objdump... no [ 120s] checking for objdump... objdump [ 120s] checking how to recognize dependent libraries... pass_all [ 120s] checking for armv7hl-tizen-linux-gnueabihf-dlltool... no [ 120s] checking for dlltool... no [ 120s] checking how to associate runtime and link libraries... printf %s\n [ 120s] checking for armv7hl-tizen-linux-gnueabihf-ar... no [ 120s] checking for ar... ar [ 121s] checking for archiver @FILE support... @ [ 121s] checking for armv7hl-tizen-linux-gnueabihf-strip... no [ 121s] checking for strip... strip [ 121s] checking for armv7hl-tizen-linux-gnueabihf-ranlib... no [ 121s] checking for ranlib... ranlib [ 121s] checking command to parse /bin/nm -B output from armv7hl-tizen-linux-gnueabihf-gcc object... ok [ 121s] checking for sysroot... no [ 121s] checking for a working dd... /bin/dd [ 121s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 121s] checking for armv7hl-tizen-linux-gnueabihf-mt... no [ 121s] checking for mt... no [ 121s] checking if : is a manifest tool... no [ 121s] checking for dlfcn.h... yes [ 121s] checking for objdir... .libs [ 121s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no [ 121s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC [ 121s] checking if armv7hl-tizen-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes [ 121s] checking if armv7hl-tizen-linux-gnueabihf-gcc static flag -static works... no [ 121s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... yes [ 121s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes [ 121s] checking whether the armv7hl-tizen-linux-gnueabihf-gcc linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 121s] checking whether -lc should be explicitly linked in... no [ 122s] checking dynamic linker characteristics... GNU/Linux ld.so [ 122s] checking how to hardcode library paths into programs... immediate [ 122s] checking whether stripping libraries is possible... yes [ 122s] checking if libtool supports shared libraries... yes [ 122s] checking whether to build shared libraries... yes [ 122s] checking whether to build static libraries... no [ 122s] checking whether make supports nested variables... (cached) yes [ 122s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 122s] checking pkg-config is at least version 0.9.0... yes [ 122s] checking for libudev... yes [ 122s] checking for libtdm libtbm libdrm >= 2.4.47 libdrm libdrm_exynos... yes [ 122s] checking for hal-api-common hal-api-tdm hal-api-tbm libdrm dlog pixman-1... yes [ 122s] checking that generated files are newer than configure... done [ 122s] configure: creating ./config.status [ 125s] config.status: creating Makefile [ 125s] config.status: creating src/libhal-backend-tdm-sprd/Makefile [ 125s] config.status: creating src/libtdm-sprd/Makefile [ 125s] config.status: creating src/Makefile [ 125s] config.status: creating config.h [ 125s] config.status: executing depfiles commands [ 126s] config.status: executing libtool commands [ 126s] [ 126s] libtdm-sprd 1.0.0 will be compiled with: [ 126s] [ 126s] TDM_SPRD_CFLAGS : -I/usr/include/hal -I/usr/include/libdrm -I/usr/include/dlog -I/usr/include/pixman-1 [ 126s] TDM_SPRD_LIBS : -L/usr/lib/hal -L/usr/lib//hal -lhal-api-common -lhal-api-tdm -lhal-api-tbm -ldrm -ldlog -lpixman-1 -ludev [ 126s] TDM_MODULE_DIR : /hal/lib [ 126s] [ 126s] [ 126s] libtdm-sprd 1.0.0 will be compiled with: [ 126s] [ 126s] TDM_SPRD_CFLAGS : -I/usr/include/libdrm -I/usr/include/exynos -I/usr/include/libdrm [ 126s] TDM_SPRD_LIBS : -ltdm -ltbm -lcapi-base-common -ldrm -ldrm_exynos -ludev [ 126s] TDM_MODULE_DIR : /usr/lib/tdm [ 126s] [ 126s] + make -j4 [ 126s] make all-recursive [ 126s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 126s] Making all in src [ 126s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 126s] Making all in libtdm-sprd [ 127s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libtdm-sprd' [ 127s] CC tdm_sprd_display.lo [ 127s] CC tdm_sprd_format.lo [ 127s] CC tdm_sprd_hwc.lo [ 127s] CC tdm_sprd_hwc_window.lo [ 127s] CC tdm_sprd_pp.lo [ 128s] CC tdm_sprd_capture.lo [ 128s] CC tdm_sprd.lo [ 129s] CCLD libtdm-sprd.la [ 130s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libtdm-sprd' [ 130s] Making all in libhal-backend-tdm-sprd [ 130s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libhal-backend-tdm-sprd' [ 130s] CC tdm_sprd_display.lo [ 130s] CC tdm_backend_sprd.lo [ 130s] CC tdm_backend_log.lo [ 130s] CC tdm_sprd_capture.lo [ 131s] CC tdm_sprd_format.lo [ 131s] CC tdm_sprd_hwc_window.lo [ 132s] CC tdm_sprd_hwc.lo [ 132s] CC tdm_sprd_pp.lo [ 133s] CCLD libhal-backend-tdm-sprd.la [ 135s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libhal-backend-tdm-sprd' [ 135s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 135s] make[3]: Nothing to be done for 'all-am'. [ 135s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 135s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 135s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 135s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 135s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 135s] + exit 0 [ 135s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Peg2mW [ 135s] + umask 022 [ 135s] + cd /home/abuild/rpmbuild/BUILD [ 135s] + cd libtdm-sprd-4.0.9 [ 135s] + LANG=C [ 135s] + export LANG [ 135s] + unset DISPLAY [ 135s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm [ 135s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm [ 135s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm [ 135s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm install [ 135s] Making install in src [ 135s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 135s] Making install in libtdm-sprd [ 135s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libtdm-sprd' [ 135s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libtdm-sprd' [ 135s] make[3]: Nothing to be done for 'install-exec-am'. [ 135s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/lib/tdm' [ 135s] /bin/sh ../../libtool --mode=install /bin/install -c libtdm-sprd.la '/home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/lib/tdm' [ 135s] libtool: install: /bin/install -c .libs/libtdm-sprd.so /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/lib/tdm/libtdm-sprd.so [ 135s] libtool: install: /bin/install -c .libs/libtdm-sprd.lai /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/lib/tdm/libtdm-sprd.la [ 136s] libtool: warning: remember to run 'libtool --finish /usr/lib/tdm' [ 136s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libtdm-sprd' [ 136s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libtdm-sprd' [ 136s] Making install in libhal-backend-tdm-sprd [ 136s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libhal-backend-tdm-sprd' [ 136s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libhal-backend-tdm-sprd' [ 136s] make[3]: Nothing to be done for 'install-exec-am'. [ 136s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/hal/lib' [ 136s] /bin/sh ../../libtool --mode=install /bin/install -c libhal-backend-tdm-sprd.la '/home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/hal/lib' [ 136s] libtool: install: /bin/install -c .libs/libhal-backend-tdm-sprd.so /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/hal/lib/libhal-backend-tdm-sprd.so [ 136s] libtool: install: /bin/install -c .libs/libhal-backend-tdm-sprd.lai /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/hal/lib/libhal-backend-tdm-sprd.la [ 136s] libtool: warning: remember to run 'libtool --finish /hal/lib' [ 136s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libhal-backend-tdm-sprd' [ 136s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src/libhal-backend-tdm-sprd' [ 136s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 136s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 136s] make[3]: Nothing to be done for 'install-exec-am'. [ 136s] make[3]: Nothing to be done for 'install-data-am'. [ 136s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 136s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 136s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/src' [ 136s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 136s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 136s] make[2]: Nothing to be done for 'install-exec-am'. [ 136s] make[2]: Nothing to be done for 'install-data-am'. [ 136s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 136s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9' [ 136s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/share/info/dir [ 136s] + find /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm -regex '.*\.la$' [ 136s] + xargs rm -f -- [ 136s] + find /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm -regex '.*\.a$' [ 136s] + xargs rm -f -- [ 136s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/hal/share/licenses/libhal-backend-tdm-sprd [ 136s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/hal/share/licenses/libhal-backend-tdm-sprd [ 136s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 4.0.9-45.1 --unique-debug-src-base libtdm-sprd-4.0.9-45.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9 [ 137s] 1+0 records in [ 137s] 1+0 records out [ 137s] 7 bytes (7 B) copied, 0.000820255 s, 8.5 kB/s [ 137s] 1+0 records in [ 137s] 1+0 records out [ 137s] 7 bytes (7 B) copied, 0.00126329 s, 5.5 kB/s [ 137s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/hal/lib/libhal-backend-tdm-sprd.so [ 137s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/lib/tdm/libtdm-sprd.so [ 137s] 0+0 records in [ 137s] 0+0 records out [ 137s] 0 bytes (0 B) copied, 0.00074414 s, 0.0 kB/s [ 137s] 0+0 records in [ 137s] 0+0 records out [ 137s] 0 bytes (0 B) copied, 0.000721515 s, 0.0 kB/s [ 137s] 761 blocks [ 137s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/libtdm-sprd-debuginfo.manifest [ 137s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libtdm-sprd-4.0.9/libtdm-sprd-debugsource.manifest [ 137s] + /usr/lib/rpm/check-buildroot [ 137s] + /usr/lib/rpm//brp-compress [ 137s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 138s] + /usr/lib/rpm/brp-python-hardlink [ 138s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm [ 138s] Processing files: libtdm-sprd-4.0.9-45.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 138s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 138s] [ 138s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.OqOzCV [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd libtdm-sprd-4.0.9 [ 138s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/share/licenses/libtdm-sprd [ 138s] + export LC_ALL=C [ 138s] + LC_ALL=C [ 138s] + export LICENSEDIR [ 138s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/share/licenses/libtdm-sprd [ 138s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm/usr/share/licenses/libtdm-sprd [ 138s] + exit 0 [ 138s] Provides: libtdm-sprd = 4.0.9-45.1 libtdm-sprd(armv7hl-32) = 4.0.9-45.1 libtdm-sprd.so [ 138s] Requires(interp): /bin/sh /sbin/ldconfig [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Requires(post): /bin/sh [ 138s] Requires(postun): /sbin/ldconfig [ 138s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libcapi-base-common.so.0 libdl.so.2 libdrm.so.2 libdrm_exynos.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libtbm.so.1 libtdm.so.1 libudev.so.1 libudev.so.1(LIBUDEV_183) [ 138s] Processing files: libtdm-sprd-debugsource-4.0.9-45.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Provides: libtdm-sprd-debugsource = 4.0.9-45.1 libtdm-sprd-debugsource(armv7hl-32) = 4.0.9-45.1 [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Processing files: hal-backend-tdm-sprd-4.0.9-45.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 138s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 138s] [ 138s] Provides: hal-backend-tdm-sprd = 4.0.9-45.1 hal-backend-tdm-sprd(armv7hl-32) = 4.0.9-45.1 libhal-backend-tdm-sprd.so [ 138s] Requires(interp): /bin/sh /sbin/ldconfig [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Requires(post): /bin/sh [ 138s] Requires(postun): /sbin/ldconfig [ 138s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libdl.so.2 libdlog.so.0 libdrm.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libhal-api-common.so.0 libhal-api-tbm.so.0 libhal-api-tdm.so.0 libpixman-1.so.0 libudev.so.1 libudev.so.1(LIBUDEV_183) [ 138s] Processing files: libtdm-sprd-debuginfo-4.0.9-45.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Provides: libtdm-sprd-debuginfo = 4.0.9-45.1 libtdm-sprd-debuginfo(armv7hl-32) = 4.0.9-45.1 [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Recommends: libtdm-sprd-debugsource(armv7hl-32) = 4.0.9-45.1 [ 138s] Processing files: hal-backend-tdm-sprd-debuginfo-4.0.9-45.1.armv7hl [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Provides: hal-backend-tdm-sprd-debuginfo = 4.0.9-45.1 hal-backend-tdm-sprd-debuginfo(armv7hl-32) = 4.0.9-45.1 [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Recommends: libtdm-sprd-debugsource(armv7hl-32) = 4.0.9-45.1 [ 138s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm [ 138s] Wrote: /home/abuild/rpmbuild/SRPMS/libtdm-sprd-4.0.9-45.1.src.rpm [ 138s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libtdm-sprd-4.0.9-45.1.armv7hl.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libtdm-sprd-debugsource-4.0.9-45.1.armv7hl.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-tdm-sprd-4.0.9-45.1.armv7hl.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libtdm-sprd-debuginfo-4.0.9-45.1.armv7hl.rpm [ 139s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-tdm-sprd-debuginfo-4.0.9-45.1.armv7hl.rpm [ 139s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Fup1nX [ 139s] + umask 022 [ 139s] + cd /home/abuild/rpmbuild/BUILD [ 139s] + cd libtdm-sprd-4.0.9 [ 139s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libtdm-sprd-4.0.9-45.1.arm [ 139s] + exit 0 [ 139s] ... checking for files with abuild user/group [ 139s] ... creating baselibs [ 140s] ... comparing built packages with the former built [ 140s] /usr/lib/build/pkg-diff.sh [ 140s] compare /.build.oldpackages/libtdm-sprd-4.0.8-44.4.src.rpm /home/abuild/rpmbuild/SRPMS/libtdm-sprd-4.0.9-45.1.src.rpm [ 140s] This is not a prerelease project. Compare the project name. [ 140s] comparing rpmtags [ 140s] comparing RELEASE [ 140s] comparing PROVIDES [ 140s] comparing scripts [ 141s] comparing filelist [ 141s] comparing file checksum [ 141s] RPM meta information is identical [ 141s] compare /.build.oldpackages/hal-backend-tdm-sprd-4.0.8-44.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-tdm-sprd-4.0.9-45.1.armv7hl.rpm [ 141s] Comparing hal-backend-tdm-sprd-4.0.8-44.4.armv7hl.rpm to hal-backend-tdm-sprd-4.0.9-45.1.armv7hl.rpm [ 141s] This is not a prerelease project. Compare the project name. [ 141s] comparing rpmtags [ 141s] --- /tmp/tmp.zZTZ102838/tmp.PZFN102911 2022-05-16 14:52:08.760079826 +0000 [ 141s] +++ /tmp/tmp.zZTZ102838/tmp.Iauv102916 2022-05-16 14:52:08.772080228 +0000 [ 141s] @@ -1,4 +1,4 @@ [ 141s] -hal-backend-tdm-sprd 4.0.8 (none) [ 141s] +hal-backend-tdm-sprd 4.0.9 (none) [ 141s] hal-backend-tdm module for sprd [ 141s] descriptionion: hal tdm backend module for sprd [ 141s] tizen [ 141s] @@ -8,4 +8,4 @@ [ 141s] cpio xz 5T [ 141s] [ 141s] (none) (none) (none) [ 141s] -obs://build.tizen.org/Tizen:Unified/standard/de9ae147fab9da962aaec3459c364231-libtdm-sprd Tizen:Unified [ 141s] +obs://build.tizen.org/Tizen:Unified/standard/a0e9472aee49f97da2e9e0c4d7aca975-libtdm-sprd Tizen:Unified [ 141s] RPM meta information is different [ 141s] compare /.build.oldpackages/hal-backend-tdm-sprd-debuginfo-4.0.8-44.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/hal-backend-tdm-sprd-debuginfo-4.0.9-45.1.armv7hl.rpm [ 141s] skipping -debuginfo package [ 141s] compare /.build.oldpackages/libtdm-sprd-4.0.8-44.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libtdm-sprd-4.0.9-45.1.armv7hl.rpm [ 142s] Comparing libtdm-sprd-4.0.8-44.4.armv7hl.rpm to libtdm-sprd-4.0.9-45.1.armv7hl.rpm [ 142s] This is not a prerelease project. Compare the project name. [ 142s] comparing rpmtags [ 142s] --- /tmp/tmp.MQku102977/tmp.nUkn103042 2022-05-16 14:52:09.284097379 +0000 [ 142s] +++ /tmp/tmp.MQku102977/tmp.GEBE103047 2022-05-16 14:52:09.296097781 +0000 [ 142s] @@ -1,4 +1,4 @@ [ 142s] -libtdm-sprd 4.0.8 (none) [ 142s] +libtdm-sprd 4.0.9 (none) [ 142s] Tizen Display Manager Spreadtrum Back-End Library [ 142s] Back-End library of Tizen Display Manager Spreadtrum : libtdm-mgr SPRD library [ 142s] tizen [ 142s] @@ -8,4 +8,4 @@ [ 142s] cpio xz 5T [ 142s] [ 142s] (none) (none) (none) [ 142s] -obs://build.tizen.org/Tizen:Unified/standard/de9ae147fab9da962aaec3459c364231-libtdm-sprd Tizen:Unified [ 142s] +obs://build.tizen.org/Tizen:Unified/standard/a0e9472aee49f97da2e9e0c4d7aca975-libtdm-sprd Tizen:Unified [ 142s] RPM meta information is different [ 142s] compare /.build.oldpackages/libtdm-sprd-debuginfo-4.0.8-44.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libtdm-sprd-debuginfo-4.0.9-45.1.armv7hl.rpm [ 142s] skipping -debuginfo package [ 142s] compare /.build.oldpackages/libtdm-sprd-debugsource-4.0.8-44.4.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libtdm-sprd-debugsource-4.0.9-45.1.armv7hl.rpm [ 142s] Comparing libtdm-sprd-debugsource-4.0.8-44.4.armv7hl.rpm to libtdm-sprd-debugsource-4.0.9-45.1.armv7hl.rpm [ 142s] This is not a prerelease project. Compare the project name. [ 142s] comparing rpmtags [ 142s] --- /tmp/tmp.yfkQ103125/tmp.MHsO103177 2022-05-16 14:52:09.812115066 +0000 [ 142s] +++ /tmp/tmp.yfkQ103125/tmp.lPWU103185 2022-05-16 14:52:09.820115334 +0000 [ 142s] @@ -1,4 +1,4 @@ [ 142s] -libtdm-sprd-debugsource 4.0.8 (none) [ 142s] +libtdm-sprd-debugsource 4.0.9 (none) [ 142s] Debug sources for package libtdm-sprd [ 142s] This package provides debug sources for package libtdm-sprd. [ 142s] Debug sources are useful when developing applications that use this [ 142s] @@ -10,4 +10,4 @@ [ 142s] cpio xz 5T [ 142s] [ 142s] (none) (none) (none) [ 142s] -obs://build.tizen.org/Tizen:Unified/standard/de9ae147fab9da962aaec3459c364231-libtdm-sprd Tizen:Unified [ 142s] +obs://build.tizen.org/Tizen:Unified/standard/a0e9472aee49f97da2e9e0c4d7aca975-libtdm-sprd Tizen:Unified [ 142s] RPM meta information is different [ 142s] [ 142s] obsnw05 finished "build libtdm-sprd.spec" at Mon May 16 14:52:09 UTC 2022. [ 142s] Retried build at Tue May 17 08:10:40 2022 returned same result, skipped