[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw19 started "build _service:gbs:libexynos-common.spec" at Fri May 6 05:40:01 UTC 2022. [ 0s] [ 0s] Building libexynos-common for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'dea3a58b04afa02ee4d3e66146e5d054' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:libexynos-common.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:libexynos-common.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:libexynos-common.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 10s] [40/41] preinstalling libsoftokn3... [ 10s] [41/41] preinstalling rpm... [ 11s] [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-armv7l postinstall script [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] [1/103] installing dlog-config-persistent-logs-7.0.3-127.3 [ 11s] [2/103] installing kernel-headers-exynos7270-tw2-3.18.14-32.140 [ 12s] [3/103] installing libmagic-data-5.41-6.304 [ 12s] [4/103] installing setup-0.9-6.8 [ 12s] warning: /etc/profile created as /etc/profile.rpmnew [ 12s] [5/103] installing filesystem-3.1-4.1 [ 12s] [6/103] installing glibc-2.30-14.2 [ 12s] [7/103] installing glibc-devel-2.30-14.2 [ 13s] [8/103] installing libatomic-9.2.0-16.2 [ 13s] [9/103] installing libgcc-9.2.0-16.2 [ 13s] [10/103] installing bash-3.2.57-5.1 [ 13s] [11/103] installing capi-base-common-0.4.70-54.2 [ 14s] [12/103] installing cpio-2.8-5.3 [ 14s] [13/103] installing diffutils-3.3-4.3 [ 14s] [14/103] installing findutils-4.3.8-5.372 [ 14s] [15/103] installing gdbm-1.8.3-3.672 [ 14s] [16/103] installing hostname-3.23-3.3 [ 14s] [17/103] installing libattr-2.5.1-5.363 [ 15s] [18/103] installing libblkid-2.37.4-12.5 [ 15s] [19/103] installing libbz2-1.0.8-5.235 [ 16s] [20/103] installing libcap-2.24-4.358 [ 16s] [21/103] installing libext2fs-1.46.0-4.43 [ 16s] [22/103] installing libfreebl3-3.34.1-3.487 [ 17s] [23/103] installing libgfortran-9.2.0-16.2 [ 17s] [24/103] installing libgomp-9.2.0-16.2 [ 17s] [25/103] installing libitm-9.2.0-16.2 [ 18s] [26/103] installing libltdl-2.4.6-4.44 [ 18s] [27/103] installing liblua-5.1.5-3.334 [ 18s] [28/103] installing liblzma-5.2.5-5.298 [ 19s] [29/103] installing libopenssl11-1.1.1l-6.217 [ 19s] [30/103] installing libpcre-8.45-5.6 [ 20s] [31/103] installing libpopt-1.16-3.621 [ 20s] [32/103] installing libsmack-1.3.1-4.349 [ 20s] [33/103] installing libsmartcols-2.37.4-12.5 [ 21s] [34/103] installing libsqlite-3.37.2-5.35 [ 21s] [35/103] installing libstdc++-9.2.0-16.2 [ 21s] [36/103] installing libuuid-2.37.4-12.5 [ 22s] [37/103] installing libzstd1-1.4.5-2.199 [ 22s] [38/103] installing m4-1.4.19-4.2 [ 22s] [39/103] installing net-tools-2.0_20121208git-4.4 [ 22s] [40/103] installing nspr-4.12-3.614 [ 23s] [41/103] installing patch-2.7.6-8.12 [ 23s] [42/103] installing pkg-config-0.29.2-4.30 [ 23s] [43/103] installing sed-4.1c-4.2 [ 23s] [44/103] installing update-alternatives-1.20.5-3.4 [ 23s] [45/103] installing which-2.17-4.4 [ 23s] [46/103] installing zlib-1.2.11-3.651 [ 23s] [47/103] installing build-compare-2015.04.28-3.228 [ 23s] [48/103] installing libstdc++-devel-9.2.0-16.2 [ 24s] [49/103] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 28s] [50/103] installing terminfo-base-full-6.2-7.280 [ 28s] [51/103] installing capi-base-common-devel-0.4.70-54.2 [ 28s] [52/103] installing cpp-9.2.0-16.2 [ 29s] [53/103] installing gcc-c++-9.2.0-16.2 [ 30s] [54/103] installing binutils-2.33.1-9.253 [ 31s] [55/103] installing coreutils-6.9-5.128 [ 31s] [56/103] installing gawk-3.1.5-4.4 [ 31s] [57/103] installing grep-2.5.2-3.4 [ 32s] [58/103] installing libacl-2.2.53-4.576 [ 32s] [59/103] installing libcc1-9.2.0-16.2 [ 32s] [60/103] installing libelf-0.178-4.81 [ 32s] [61/103] installing libmount-2.37.4-12.5 [ 33s] [62/103] installing libubsan-9.2.0-16.2 [ 33s] [63/103] installing make-4.3-3.13 [ 33s] [64/103] installing nss-certs-3.34.1-3.487 [ 33s] [65/103] installing smack-1.3.1-4.349 [ 33s] [66/103] installing bzip2-1.0.8-5.235 [ 34s] [67/103] installing libfdisk-2.37.4-12.5 [ 34s] [68/103] installing libmagic-5.41-6.304 [ 35s] [69/103] installing libxml2-2.9.12-7.154 [ 35s] [70/103] installing perl-5.34.0-7.23 [ 39s] [71/103] installing xz-5.2.5-5.298 [ 39s] [72/103] installing dlog-7.0.3-127.3 [ 39s] [73/103] installing build-mkbaselibs-20120927-3.3 [ 39s] [74/103] installing autoconf-2.71-6.45 [ 40s] [75/103] installing dlog-logger-7.0.3-127.3 [ 40s] [76/103] installing file-5.41-6.304 [ 40s] [77/103] installing glibc-locale-2.30-14.2 [ 40s] [78/103] installing tar-1.17-3.4 [ 40s] [79/103] installing gzip-1.3.12-3.627 [ 41s] [80/103] installing libncurses6-6.2-7.280 [ 41s] [81/103] installing pam-1.1.6-4.2 [ 41s] [82/103] installing tzdata-2021e-5.1 [ 42s] [83/103] installing libdw-0.178-4.81 [ 42s] [84/103] installing libarchive-3.5.2-3.107 [ 42s] [85/103] installing gcc-9.2.0-16.2 [ 43s] [86/103] installing libncurses-6.2-7.280 [ 43s] [87/103] installing qemu-accel-x86_64-armv7l-0.4-10.1 [ 50s] [88/103] installing automake-1.16.4-6.41 [ 51s] [89/103] installing less-466-3.4 [ 51s] [90/103] installing libreadline-5.2-3.212 [ 51s] [91/103] installing procps-ng-3.3.17-4.1 [ 51s] [92/103] installing libasm-0.178-4.81 [ 51s] [93/103] installing build-20120927-3.3 [ 52s] [94/103] installing libdlog-7.0.3-127.3 [ 52s] [95/103] installing libdlog-devel-7.0.3-127.3 [ 52s] [96/103] installing libtool-2.4.6-4.44 [ 52s] [97/103] installing elfutils-0.178-4.81 [ 52s] [98/103] installing util-linux-2.37.4-12.5 [ 52s] [99/103] installing util-linux-su-2.37.4-12.5 [ 52s] [100/103] installing nss-3.34.1-3.487 [ 53s] [101/103] installing libsoftokn3-3.34.1-3.487 [ 53s] [102/103] installing rpm-4.14.1.1-9.119 [ 53s] [103/103] installing rpm-build-4.14.1.1-9.119 [ 54s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 54s] now finalizing build dir... [ 54s] Running build time source services... [ 54s] build target is armv7l-tizen-linux [ 54s] ----------------------------------------------------------------- [ 54s] I have the following modifications for libexynos-common.spec: [ 54s] 7c7 [ 54s] < Release: 0 [ 54s] --- [ 54s] > Release: 7.14 [ 54s] ----------------------------------------------------------------- [ 54s] ----- building libexynos-common.spec (user abuild) [ 54s] ----------------------------------------------------------------- [ 54s] ----------------------------------------------------------------- [ 55s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/dea3a58b04afa02ee4d3e66146e5d054-libexynos-common' -ba /home/abuild/rpmbuild/SOURCES/libexynos-common.spec [ 55s] Building target platforms: armv7l-tizen-linux [ 55s] Building for target armv7l-tizen-linux [ 55s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.AecbSj [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + rm -rf libexynos-common-0.0.1 [ 55s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libexynos-common-0.0.1.tar.gz [ 55s] + /bin/tar -xof - [ 55s] + STATUS=0 [ 55s] + '[' 0 -ne 0 ']' [ 55s] + cd libexynos-common-0.0.1 [ 55s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 55s] + exit 0 [ 55s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qr4evj [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd libexynos-common-0.0.1 [ 55s] ++ uname -m [ 55s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 55s] + LANG=C [ 55s] + export LANG [ 55s] + unset DISPLAY [ 55s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 55s] + export CFLAGS [ 55s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 55s] + export CXXFLAGS [ 55s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 55s] + export FFLAGS [ 55s] + LDFLAGS= [ 55s] + export LDFLAGS [ 55s] + ./autogen.sh [ 55s] autoreconf: export WARNINGS= [ 55s] autoreconf: Entering directory '.' [ 55s] autoreconf: configure.ac: not using Gettext [ 56s] autoreconf: running: aclocal --force [ 59s] autoreconf: configure.ac: tracing [ 61s] autoreconf: running: libtoolize --copy --force [ 62s] libtoolize: putting auxiliary files in '.'. [ 62s] libtoolize: copying file './ltmain.sh' [ 62s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 62s] libtoolize: and rerunning libtoolize and aclocal. [ 62s] libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 62s] autoreconf: configure.ac: not using Intltool [ 62s] autoreconf: configure.ac: not using Gtkdoc [ 62s] autoreconf: running: aclocal --force [ 65s] autoreconf: running: /usr/bin/autoconf --force [ 66s] configure.ac:38: warning: The macro `AC_HELP_STRING' is obsolete. [ 66s] configure.ac:38: You should run autoupdate. [ 66s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 66s] configure.ac:38: the top level [ 66s] configure.ac:59: warning: AC_OUTPUT should be used without arguments. [ 66s] configure.ac:59: You should run autoupdate. [ 68s] autoreconf: running: /usr/bin/autoheader --force [ 70s] autoreconf: running: automake --add-missing --copy --force-missing [ 72s] configure.ac:13: installing './compile' [ 72s] configure.ac:24: installing './config.guess' [ 72s] configure.ac:24: installing './config.sub' [ 72s] configure.ac:9: installing './install-sh' [ 72s] configure.ac:9: installing './missing' [ 72s] libcsc/Makefile.am: installing './depcomp' [ 74s] autoreconf: Leaving directory '.' [ 74s] checking for a BSD-compatible install... /bin/install -c [ 74s] checking whether build environment is sane... yes [ 74s] checking for a race-free mkdir -p... /bin/mkdir -p [ 74s] checking for gawk... gawk [ 74s] checking whether make sets $(MAKE)... yes [ 74s] checking whether make supports nested variables... yes [ 74s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 74s] ./configure: line 3648: i: command not found [ 74s] checking whether make supports the include directive... yes (GNU style) [ 74s] checking for gcc... gcc [ 74s] checking whether the C compiler works... yes [ 74s] checking for C compiler default output file name... a.out [ 74s] checking for suffix of executables... [ 74s] checking whether we are cross compiling... no [ 74s] checking for suffix of object files... o [ 74s] checking whether the compiler supports GNU C... yes [ 75s] checking whether gcc accepts -g... yes [ 75s] checking for gcc option to enable C11 features... none needed [ 75s] checking whether gcc understands -c and -o together... yes [ 75s] checking dependency style of gcc... gcc3 [ 75s] checking dependency style of gcc... gcc3 [ 75s] checking for gcc... (cached) gcc [ 75s] checking whether the compiler supports GNU C... (cached) yes [ 75s] checking whether gcc accepts -g... (cached) yes [ 75s] checking for gcc option to enable C11 features... (cached) none needed [ 75s] checking whether gcc understands -c and -o together... (cached) yes [ 75s] checking dependency style of gcc... (cached) gcc3 [ 75s] checking for g++... g++ [ 75s] checking whether the compiler supports GNU C++... yes [ 75s] checking whether g++ accepts -g... yes [ 75s] checking for g++ option to enable C++11 features... none needed [ 75s] checking dependency style of g++... gcc3 [ 75s] checking for stdio.h... yes [ 75s] checking for stdlib.h... yes [ 75s] checking for string.h... yes [ 75s] checking for inttypes.h... yes [ 75s] checking for stdint.h... yes [ 75s] checking for strings.h... yes [ 75s] checking for sys/stat.h... yes [ 75s] checking for sys/types.h... yes [ 75s] checking for unistd.h... yes [ 75s] checking for wchar.h... yes [ 75s] checking for minix/config.h... no [ 75s] checking whether it is safe to define __EXTENSIONS__... yes [ 75s] checking whether _XOPEN_SOURCE should be defined... no [ 75s] checking for special C compiler options needed for large files... no [ 75s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 76s] checking for size_t... yes [ 76s] checking for working alloca.h... yes [ 76s] checking for alloca... yes [ 76s] checking build system type... armv7l-unknown-linux-gnueabi [ 76s] checking host system type... armv7l-unknown-linux-gnueabi [ 76s] checking how to print strings... printf [ 76s] checking for a sed that does not truncate output... /bin/sed [ 76s] checking for grep that handles long lines and -e... /bin/grep [ 76s] checking for egrep... /bin/grep -E [ 76s] checking for fgrep... /bin/grep -F [ 76s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 76s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 76s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 76s] checking the name lister (/bin/nm -B) interface... BSD nm [ 76s] checking whether ln -s works... yes [ 76s] checking the maximum length of command line arguments... 1572864 [ 76s] checking how to convert armv7l-unknown-linux-gnueabi file names to armv7l-unknown-linux-gnueabi format... func_convert_file_noop [ 76s] checking how to convert armv7l-unknown-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 76s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 76s] checking for objdump... objdump [ 76s] checking how to recognize dependent libraries... pass_all [ 76s] checking for dlltool... no [ 76s] checking how to associate runtime and link libraries... printf %s\n [ 76s] checking for ar... ar [ 76s] checking for archiver @FILE support... @ [ 76s] checking for strip... strip [ 76s] checking for ranlib... ranlib [ 76s] checking command to parse /bin/nm -B output from gcc object... ok [ 76s] checking for sysroot... no [ 76s] checking for a working dd... /bin/dd [ 76s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 76s] checking for mt... no [ 76s] checking if : is a manifest tool... no [ 76s] checking for dlfcn.h... yes [ 76s] checking for objdir... .libs [ 76s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 76s] checking for gcc option to produce PIC... -fPIC -DPIC [ 76s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 76s] checking if gcc static flag -static works... no [ 76s] checking if gcc supports -c -o file.o... yes [ 76s] checking if gcc supports -c -o file.o... (cached) yes [ 76s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 76s] checking whether -lc should be explicitly linked in... no [ 76s] checking dynamic linker characteristics... GNU/Linux ld.so [ 76s] checking how to hardcode library paths into programs... immediate [ 76s] checking whether stripping libraries is possible... yes [ 76s] checking if libtool supports shared libraries... yes [ 76s] checking whether to build shared libraries... yes [ 76s] checking whether to build static libraries... no [ 77s] checking how to run the C++ preprocessor... g++ -E [ 77s] checking for ld used by g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 77s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 77s] checking whether the g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 77s] checking for g++ option to produce PIC... -fPIC -DPIC [ 77s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 77s] checking if g++ static flag -static works... no [ 77s] checking if g++ supports -c -o file.o... yes [ 77s] checking if g++ supports -c -o file.o... (cached) yes [ 77s] checking whether the g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 77s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 77s] checking how to hardcode library paths into programs... immediate [ 77s] checking whether make supports nested variables... (cached) yes [ 77s] checking that generated files are newer than configure... done [ 77s] configure: creating ./config.status [ 78s] config.status: creating Makefile [ 78s] config.status: creating libv4l2/Makefile [ 78s] config.status: creating libswconverter/Makefile [ 78s] config.status: creating libcsc/Makefile [ 78s] config.status: creating libgscaler/Makefile [ 78s] config.status: creating libion/Makefile [ 78s] config.status: creating config.h [ 78s] config.status: executing depfiles commands [ 78s] config.status: executing libtool commands [ 78s] [ 78s] libexynos 1.0.0 will be compiled with: [ 78s] [ 78s] [ 78s] + export 'CFLAGS+= -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 78s] + CFLAGS+=' -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 78s] + LDFLAGS+='-Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed' [ 78s] + export LDFLAGS [ 78s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 78s] + export CFLAGS [ 78s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 78s] + export CXXFLAGS [ 78s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 78s] + export FFLAGS [ 78s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static --enable-dlog [ 79s] checking for a BSD-compatible install... /bin/install -c [ 79s] checking whether build environment is sane... yes [ 79s] checking for a race-free mkdir -p... /bin/mkdir -p [ 79s] checking for gawk... gawk [ 79s] checking whether make sets $(MAKE)... yes [ 79s] checking whether make supports nested variables... yes [ 79s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 79s] ./configure: line 3648: i: command not found [ 79s] checking whether make supports the include directive... yes (GNU style) [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 79s] checking whether the C compiler works... yes [ 79s] checking for C compiler default output file name... a.out [ 79s] checking for suffix of executables... [ 79s] checking whether we are cross compiling... no [ 79s] checking for suffix of object files... o [ 79s] checking whether the compiler supports GNU C... yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 79s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 79s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 79s] checking whether the compiler supports GNU C... (cached) yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 79s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... (cached) none needed [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 79s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 79s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 79s] checking whether the compiler supports GNU C++... yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 79s] checking for armv7l-tizen-linux-gnueabi-g++ option to enable C++11 features... none needed [ 80s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 80s] checking for stdio.h... yes [ 80s] checking for stdlib.h... yes [ 80s] checking for string.h... yes [ 80s] checking for inttypes.h... yes [ 80s] checking for stdint.h... yes [ 80s] checking for strings.h... yes [ 80s] checking for sys/stat.h... yes [ 80s] checking for sys/types.h... yes [ 80s] checking for unistd.h... yes [ 80s] checking for wchar.h... yes [ 80s] checking for minix/config.h... no [ 80s] checking whether it is safe to define __EXTENSIONS__... yes [ 80s] checking whether _XOPEN_SOURCE should be defined... no [ 80s] checking for special C compiler options needed for large files... no [ 80s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 80s] checking for size_t... yes [ 80s] checking for working alloca.h... yes [ 80s] checking for alloca... yes [ 80s] checking build system type... armv7l-tizen-linux-gnueabi [ 80s] checking host system type... armv7l-tizen-linux-gnueabi [ 80s] checking how to print strings... printf [ 80s] checking for a sed that does not truncate output... /bin/sed [ 80s] checking for grep that handles long lines and -e... /bin/grep [ 80s] checking for egrep... /bin/grep -E [ 80s] checking for fgrep... /bin/grep -F [ 80s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 80s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 80s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 80s] checking the name lister (/bin/nm -B) interface... BSD nm [ 80s] checking whether ln -s works... yes [ 80s] checking the maximum length of command line arguments... 1572864 [ 80s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 80s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 80s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 80s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 80s] checking for objdump... objdump [ 80s] checking how to recognize dependent libraries... pass_all [ 80s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 80s] checking for dlltool... no [ 80s] checking how to associate runtime and link libraries... printf %s\n [ 80s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 80s] checking for ar... ar [ 80s] checking for archiver @FILE support... @ [ 80s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 80s] checking for strip... strip [ 80s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 80s] checking for ranlib... ranlib [ 80s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 80s] checking for sysroot... no [ 81s] checking for a working dd... /bin/dd [ 81s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 81s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 81s] checking for mt... no [ 81s] checking if : is a manifest tool... no [ 81s] checking for dlfcn.h... yes [ 81s] checking for objdir... .libs [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 81s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 81s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 81s] checking whether -lc should be explicitly linked in... no [ 81s] checking dynamic linker characteristics... GNU/Linux ld.so [ 81s] checking how to hardcode library paths into programs... immediate [ 81s] checking whether stripping libraries is possible... yes [ 81s] checking if libtool supports shared libraries... yes [ 81s] checking whether to build shared libraries... yes [ 81s] checking whether to build static libraries... no [ 81s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 81s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 81s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 81s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 81s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 81s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 81s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 81s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 81s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 81s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 81s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 81s] checking how to hardcode library paths into programs... immediate [ 81s] checking whether make supports nested variables... (cached) yes [ 81s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 81s] checking pkg-config is at least version 0.9.0... yes [ 81s] checking for dlog... yes [ 82s] checking that generated files are newer than configure... done [ 82s] configure: creating ./config.status [ 82s] config.status: creating Makefile [ 82s] config.status: creating libv4l2/Makefile [ 82s] config.status: creating libswconverter/Makefile [ 82s] config.status: creating libcsc/Makefile [ 82s] config.status: creating libgscaler/Makefile [ 82s] config.status: creating libion/Makefile [ 82s] config.status: creating config.h [ 82s] config.status: config.h is unchanged [ 82s] config.status: executing depfiles commands [ 83s] config.status: executing libtool commands [ 83s] [ 83s] libexynos 1.0.0 will be compiled with: [ 83s] [ 83s] [ 83s] + make [ 83s] make all-recursive [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 83s] Making all in libion [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 83s] CC libion_la-ion.lo [ 83s] CCLD libion.la [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 83s] Making all in libv4l2 [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 83s] CC libexynosv4l2_la-exynos_v4l2.lo [ 84s] CC libexynosv4l2_la-exynos_subdev.lo [ 84s] CC libexynosv4l2_la-exynos_mc.lo [ 84s] In file included from /usr/include/string.h:494, [ 84s] from exynos_mc.c:37: [ 84s] In function 'strncpy', [ 84s] inlined from '__media_get_devname_sysfs' at exynos_mc.c:187:5: [ 84s] /usr/include/bits/string_fortified.h:106:10: warning: '__builtin_strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation] [ 84s] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); [ 84s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 84s] CCLD libexynosv4l2.la [ 84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 84s] Making all in libswconverter [ 84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 84s] CC libswconverter_la-swconvertor.lo [ 85s] CCAS libswconverter_la-csc_BGRA8888_to_RGBA8888_NEON.lo [ 85s] CCAS libswconverter_la-csc_BGRA8888_to_YUV420SP_NEON.lo [ 85s] CCAS libswconverter_la-csc_RGBA8888_to_YUV420SP_NEON.lo [ 85s] CCAS libswconverter_la-csc_interleave_memcpy_neon.lo [ 85s] CCAS libswconverter_la-csc_linear_to_tiled_crop_neon.lo [ 85s] CCAS libswconverter_la-csc_linear_to_tiled_interleave_crop_neon.lo [ 85s] CCAS libswconverter_la-csc_tiled_to_linear_crop_neon.lo [ 85s] CCAS libswconverter_la-csc_tiled_to_linear_deinterleave_crop_neon.lo [ 85s] CCAS libswconverter_la-csc_tiled_to_linear_uv_deinterleave_neon.lo [ 85s] CCAS libswconverter_la-csc_tiled_to_linear_uv_neon.lo [ 85s] CCAS libswconverter_la-csc_tiled_to_linear_y_neon.lo [ 86s] CCLD libswconverter.la [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 86s] Making all in libcsc [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 86s] CC libcsc_la-csc.lo [ 86s] CCLD libcsc.la [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 86s] Making all in libgscaler [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 86s] CXX libexynosgscaler_la-libgscaler_obj.lo [ 87s] CXX libexynosgscaler_la-libgscaler.lo [ 87s] CXXLD libexynosgscaler.la [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 88s] + exit 0 [ 88s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.xGAgQm [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd libexynos-common-0.0.1 [ 88s] + LANG=C [ 88s] + export LANG [ 88s] + unset DISPLAY [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include/linux [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include/system [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/pkgconfig [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/libion/include/ion/ [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/libion/kernel-headers/linux [ 88s] + install -m0644 include/content_protect.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/csc.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/exynos_format.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/exynos_gscaler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/exynos_ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/exynos_log.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/exynos_scaler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/exynos_v4l2.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/media.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/swconverter.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include [ 88s] + install -m0644 include/linux/compiler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include/linux [ 88s] + install -m0644 include/system/graphics.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/include/system [ 88s] + install -m0644 libion/include/ion/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/libion/include/ion/ [ 88s] + install -m0644 libion/kernel-headers/linux/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/libion/kernel-headers/linux [ 88s] + install exynos-common.pc /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/pkgconfig/ [ 88s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm install [ 88s] Making install in libion [ 88s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 88s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] /bin/sh ../libtool --mode=install /bin/install -c libion.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] libtool: install: /bin/install -c .libs/libion.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libion.so.0.0.0 [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libion.so.0.0.0 libion.so.0 || { rm -f libion.so.0 && ln -s libion.so.0.0.0 libion.so.0; }; }) [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libion.so.0.0.0 libion.so || { rm -f libion.so && ln -s libion.so.0.0.0 libion.so; }; }) [ 88s] libtool: install: /bin/install -c .libs/libion.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libion.la [ 88s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 88s] make[2]: Nothing to be done for 'install-data-am'. [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 88s] Making install in libv4l2 [ 88s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 88s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] /bin/sh ../libtool --mode=install /bin/install -c libexynosv4l2.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] libtool: install: /bin/install -c .libs/libexynosv4l2.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libexynosv4l2.so.0.0.0 [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libexynosv4l2.so.0.0.0 libexynosv4l2.so.0 || { rm -f libexynosv4l2.so.0 && ln -s libexynosv4l2.so.0.0.0 libexynosv4l2.so.0; }; }) [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libexynosv4l2.so.0.0.0 libexynosv4l2.so || { rm -f libexynosv4l2.so && ln -s libexynosv4l2.so.0.0.0 libexynosv4l2.so; }; }) [ 88s] libtool: install: /bin/install -c .libs/libexynosv4l2.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libexynosv4l2.la [ 88s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 88s] make[2]: Nothing to be done for 'install-data-am'. [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 88s] Making install in libswconverter [ 88s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 88s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] /bin/sh ../libtool --mode=install /bin/install -c libswconverter.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] libtool: install: /bin/install -c .libs/libswconverter.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libswconverter.so.0.0.0 [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libswconverter.so.0.0.0 libswconverter.so.0 || { rm -f libswconverter.so.0 && ln -s libswconverter.so.0.0.0 libswconverter.so.0; }; }) [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libswconverter.so.0.0.0 libswconverter.so || { rm -f libswconverter.so && ln -s libswconverter.so.0.0.0 libswconverter.so; }; }) [ 88s] libtool: install: /bin/install -c .libs/libswconverter.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libswconverter.la [ 88s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 88s] make[2]: Nothing to be done for 'install-data-am'. [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 88s] Making install in libcsc [ 88s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 88s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 88s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] /bin/sh ../libtool --mode=install /bin/install -c libcsc.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 88s] libtool: warning: relinking 'libcsc.la' [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc; /bin/sh "/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libtool" --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -I../include -DLOG_TAG=\"LIBCSC\" -I/usr/include/dlog -DUSE_DLOG -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS -L../libswconverter -Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed -o libcsc.la -rpath /usr/lib libcsc_la-csc.lo -lswconverter -ldlog -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm) [ 89s] libtool: install: /bin/install -c .libs/libcsc.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libcsc.so.0.0.0 [ 89s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libcsc.so.0.0.0 libcsc.so.0 || { rm -f libcsc.so.0 && ln -s libcsc.so.0.0.0 libcsc.so.0; }; }) [ 89s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libcsc.so.0.0.0 libcsc.so || { rm -f libcsc.so && ln -s libcsc.so.0.0.0 libcsc.so; }; }) [ 89s] libtool: install: /bin/install -c .libs/libcsc.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libcsc.la [ 89s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 89s] make[2]: Nothing to be done for 'install-data-am'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 89s] Making install in libgscaler [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 89s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 89s] /bin/sh ../libtool --mode=install /bin/install -c libexynosgscaler.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib' [ 89s] libtool: warning: relinking 'libexynosgscaler.la' [ 89s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler; /bin/sh "/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libtool" --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -DLOG_TAG=\"LIBEXYNOSGSCALER\" -I../include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -L../libcsc -Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed -o libexynosgscaler.la -rpath /usr/lib libexynosgscaler_la-libgscaler_obj.lo libexynosgscaler_la-libgscaler.lo -lcsc -ldlog -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm) [ 89s] libtool: install: /bin/install -c .libs/libexynosgscaler.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libexynosgscaler.so.0.0.0 [ 89s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libexynosgscaler.so.0.0.0 libexynosgscaler.so.0 || { rm -f libexynosgscaler.so.0 && ln -s libexynosgscaler.so.0.0.0 libexynosgscaler.so.0; }; }) [ 89s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib && { ln -s -f libexynosgscaler.so.0.0.0 libexynosgscaler.so || { rm -f libexynosgscaler.so && ln -s libexynosgscaler.so.0.0.0 libexynosgscaler.so; }; }) [ 89s] libtool: install: /bin/install -c .libs/libexynosgscaler.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libexynosgscaler.la [ 89s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 89s] make[2]: Nothing to be done for 'install-data-am'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 89s] make[2]: Nothing to be done for 'install-exec-am'. [ 89s] make[2]: Nothing to be done for 'install-data-am'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 89s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/share/info/dir [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm -regex '.*\.la$' [ 89s] + xargs rm -f -- [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm -regex '.*\.a$' [ 89s] + xargs rm -f -- [ 89s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 0.0.1-7.14 --unique-debug-src-base libexynos-common-0.0.1-7.14.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1 [ 90s] 1+0 records in [ 90s] 1+0 records out [ 90s] 7 bytes (7 B) copied, 0.000634958 s, 11.0 kB/s [ 90s] 1+0 records in [ 90s] 1+0 records out [ 90s] 7 bytes (7 B) copied, 0.000574811 s, 12.2 kB/s [ 90s] 1+0 records in [ 90s] 1+0 records out [ 90s] 7 bytes (7 B) copied, 0.00103941 s, 6.7 kB/s [ 90s] 1+0 records in [ 90s] 1+0 records out [ 90s] 7 bytes (7 B) copied, 0.000806202 s, 8.7 kB/s [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libcsc.so.0.0.0 [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libexynosgscaler.so.0.0.0 [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libion.so.0.0.0 [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libexynosv4l2.so.0.0.0 [ 90s] 1+0 records in [ 90s] 1+0 records out [ 90s] 7 bytes (7 B) copied0+0 records in [ 90s] 0+0 records out [ 90s] , 0.000630316 s, 11.1 kB/s [ 90s] 0 bytes (0 B) copied, 0.000444624 s, 0.0 kB/s [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/lib/libswconverter.so.0.0.0 [ 90s] 0+0 records in [ 90s] 0+0 records out [ 90s] 0 bytes (0 B) copied, 0.000537215 s, 0.0 kB/s [ 90s] 0+0 records in [ 90s] 0+0 records out [ 90s] 0 bytes (0 B) copied0+0 records in [ 90s] 0+0 records out [ 90s] 0 bytes (0 B) copied, 0.00100724 s, 0.0 kB/s [ 90s] , 0.000434915 s, 0.0 kB/s [ 90s] 985 blocks [ 90s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libexynos-common-debuginfo.manifest [ 90s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libexynos-common-debugsource.manifest [ 90s] + /usr/lib/rpm/check-buildroot [ 90s] + /usr/lib/rpm//brp-compress [ 90s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 90s] + /usr/lib/rpm/brp-python-hardlink [ 90s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm [ 90s] Processing files: libexynos-common-0.0.1-7.14.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 90s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 90s] [ 90s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Q6MUbk [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd libexynos-common-0.0.1 [ 90s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/share/licenses/libexynos-common [ 90s] + export LC_ALL=C [ 90s] + LC_ALL=C [ 90s] + export LICENSEDIR [ 90s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/share/licenses/libexynos-common [ 90s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm/usr/share/licenses/libexynos-common [ 90s] + exit 0 [ 90s] Provides: libcsc.so.0 libexynos-common = 0.0.1-7.14 libexynos-common(armv7l-32) = 0.0.1-7.14 libexynosgscaler.so.0 libexynosv4l2.so.0 libion.so.0 libswconverter.so.0 [ 90s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 90s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 90s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcsc.so.0 libdlog.so.0 libexynosgscaler.so.0 libexynosv4l2.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libion.so.0 libm.so.6 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.9) libstdc++.so.6(GLIBCXX_3.4) libswconverter.so.0 [ 90s] Processing files: libexynos-common-debugsource-0.0.1-7.14.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Provides: libexynos-common-debugsource = 0.0.1-7.14 libexynos-common-debugsource(armv7l-32) = 0.0.1-7.14 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Processing files: libexynos-common-devel-0.0.1-7.14.armv7l [ 91s] Provides: libexynos-common-devel = 0.0.1-7.14 libexynos-common-devel(armv7l-32) = 0.0.1-7.14 pkgconfig(exynos-common) = @VERSION@ [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: /usr/bin/pkg-config [ 91s] Processing files: libexynos-common-debuginfo-0.0.1-7.14.armv7l [ 91s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 91s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Provides: libexynos-common-debuginfo = 0.0.1-7.14 libexynos-common-debuginfo(armv7l-32) = 0.0.1-7.14 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Recommends: libexynos-common-debugsource(armv7l-32) = 0.0.1-7.14 [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/libexynos-common-0.0.1-7.14.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-0.0.1-7.14.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-debugsource-0.0.1-7.14.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-devel-0.0.1-7.14.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-debuginfo-0.0.1-7.14.armv7l.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.7pnmFj [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd libexynos-common-0.0.1 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.14.arm [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 92s] [ 92s] obsnw19 finished "build libexynos-common.spec" at Fri May 6 05:41:33 UTC 2022. [ 92s] Retried build at Tue May 17 06:16:56 2022 returned same result, skipped