[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obsnw14 started "build _service:gbs:org.tizen.firmware-update-ui.spec" at Fri May 6 05:36:33 UTC 2022. [ 1s] [ 1s] Building org.tizen.firmware-update-ui for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '2659bf40db890b4beacec010ea53ade9' [ 1s] [ 1s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:org.tizen.firmware-update-ui.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:org.tizen.firmware-update-ui.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:org.tizen.firmware-update-ui.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/3/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 11s] [38/41] preinstalling util-linux-su... [ 11s] [39/41] preinstalling nss... [ 11s] [40/41] preinstalling libsoftokn3... [ 11s] [41/41] preinstalling rpm... [ 11s] [ 12s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-armv7l postinstall script [ 12s] running setup postinstall script [ 12s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 12s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 12s] initializing rpm db... [ 13s] reordering...cycle: libsoftokn3 -> nss [ 13s] breaking dependency nss -> libsoftokn3 [ 13s] done [ 14s] [1/99] installing libmagic-data-5.41-6.304 [ 16s] [2/99] installing setup-0.9-6.8 [ 16s] warning: /etc/profile created as /etc/profile.rpmnew [ 16s] [3/99] installing filesystem-3.1-4.1 [ 17s] [4/99] installing glibc-2.30-14.2 [ 19s] [5/99] installing libatomic-9.2.0-16.2 [ 20s] [6/99] installing libgcc-9.2.0-16.2 [ 21s] [7/99] installing bash-3.2.57-5.1 [ 22s] [8/99] installing cpio-2.8-5.3 [ 22s] [9/99] installing diffutils-3.3-4.3 [ 23s] [10/99] installing findutils-4.3.8-5.372 [ 23s] [11/99] installing gdbm-1.8.3-3.672 [ 24s] [12/99] installing hostname-3.23-3.3 [ 24s] [13/99] installing libattr-2.5.1-5.363 [ 25s] [14/99] installing libblkid-2.37.4-12.5 [ 26s] [15/99] installing libbz2-1.0.8-5.235 [ 30s] [16/99] installing libcap-2.24-4.358 [ 31s] [17/99] installing libext2fs-1.46.0-4.43 [ 32s] [18/99] installing libfreebl3-3.34.1-3.487 [ 39s] [19/99] installing libgfortran-9.2.0-16.2 [ 41s] [20/99] installing libgomp-9.2.0-16.2 [ 42s] [21/99] installing libitm-9.2.0-16.2 [ 42s] [22/99] installing libltdl-2.4.6-4.44 [ 43s] [23/99] installing liblua-5.1.5-3.334 [ 47s] [24/99] installing liblzma-5.2.5-5.298 [ 49s] [25/99] installing libopenssl11-1.1.1l-6.217 [ 51s] [26/99] installing libpcre-8.45-5.6 [ 52s] [27/99] installing libpopt-1.16-3.621 [ 52s] [28/99] installing libsmack-1.3.1-4.349 [ 54s] [29/99] installing libsmartcols-2.37.4-12.5 [ 55s] [30/99] installing libsqlite-3.37.2-5.35 [ 56s] [31/99] installing libstdc++-9.2.0-16.2 [ 63s] [32/99] installing libuuid-2.37.4-12.5 [ 72s] [33/99] installing libzstd1-1.4.5-2.199 [ 74s] [34/99] installing m4-1.4.19-4.2 [ 74s] [35/99] installing net-tools-2.0_20121208git-4.4 [ 74s] [36/99] installing nspr-4.12-3.614 [ 74s] [37/99] installing patch-2.7.6-8.12 [ 74s] [38/99] installing pkg-config-0.29.2-4.30 [ 74s] [39/99] installing sed-4.1c-4.2 [ 74s] [40/99] installing update-alternatives-1.20.5-3.4 [ 75s] [41/99] installing which-2.17-4.4 [ 75s] [42/99] installing zlib-1.2.11-3.651 [ 75s] [43/99] installing build-compare-2015.04.28-3.228 [ 75s] [44/99] installing libstdc++-devel-9.2.0-16.2 [ 75s] [45/99] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 81s] [46/99] installing terminfo-base-full-6.2-7.280 [ 82s] [47/99] installing cpp-9.2.0-16.2 [ 83s] [48/99] installing gcc-c++-9.2.0-16.2 [ 85s] [49/99] installing binutils-2.33.1-9.253 [ 86s] [50/99] installing coreutils-6.9-5.128 [ 86s] [51/99] installing gawk-3.1.5-4.4 [ 86s] [52/99] installing grep-2.5.2-3.4 [ 86s] [53/99] installing libacl-2.2.53-4.576 [ 86s] [54/99] installing libcc1-9.2.0-16.2 [ 87s] [55/99] installing libelf-0.178-4.81 [ 87s] [56/99] installing libmount-2.37.4-12.5 [ 87s] [57/99] installing libubsan-9.2.0-16.2 [ 88s] [58/99] installing make-4.3-3.13 [ 88s] [59/99] installing nss-certs-3.34.1-3.487 [ 88s] [60/99] installing smack-1.3.1-4.349 [ 88s] [61/99] installing bzip2-1.0.8-5.235 [ 88s] [62/99] installing libfdisk-2.37.4-12.5 [ 88s] [63/99] installing libmagic-5.41-6.304 [ 89s] [64/99] installing libxml2-2.9.12-7.154 [ 89s] [65/99] installing perl-5.34.0-7.23 [ 91s] [66/99] installing xz-5.2.5-5.298 [ 91s] [67/99] installing build-mkbaselibs-20120927-3.3 [ 91s] [68/99] installing linux-glibc-devel-3.10-4.479 [ 92s] [69/99] installing autoconf-2.71-6.45 [ 92s] [70/99] installing file-5.41-6.304 [ 92s] [71/99] installing glibc-locale-2.30-14.2 [ 93s] [72/99] installing tar-1.17-3.4 [ 93s] [73/99] installing tizen-platform-config-5.0-16.2 [ 94s] [74/99] installing gzip-1.3.12-3.627 [ 94s] [75/99] installing libncurses6-6.2-7.280 [ 94s] [76/99] installing pam-1.1.6-4.2 [ 95s] [77/99] installing tzdata-2021e-5.1 [ 95s] [78/99] installing libdw-0.178-4.81 [ 95s] [79/99] installing libarchive-3.5.2-3.107 [ 96s] [80/99] installing gcc-9.2.0-16.2 [ 97s] [81/99] installing libncurses-6.2-7.280 [ 97s] [82/99] installing glibc-devel-2.30-14.2 [ 98s] [83/99] installing qemu-accel-x86_64-armv7l-0.4-10.1 [ 106s] [84/99] installing automake-1.16.4-6.41 [ 107s] [85/99] installing less-466-3.4 [ 107s] [86/99] installing libreadline-5.2-3.212 [ 107s] [87/99] installing libtzplatform-config-5.0-16.2 [ 107s] [88/99] installing procps-ng-3.3.17-4.1 [ 108s] [89/99] installing libasm-0.178-4.81 [ 108s] [90/99] installing build-20120927-3.3 [ 108s] [91/99] installing libtzplatform-config-devel-5.0-16.2 [ 108s] [92/99] installing libtool-2.4.6-4.44 [ 108s] [93/99] installing elfutils-0.178-4.81 [ 108s] [94/99] installing util-linux-2.37.4-12.5 [ 108s] [95/99] installing util-linux-su-2.37.4-12.5 [ 108s] [96/99] installing nss-3.34.1-3.487 [ 109s] [97/99] installing libsoftokn3-3.34.1-3.487 [ 109s] [98/99] installing rpm-4.14.1.1-9.119 [ 109s] [99/99] installing rpm-build-4.14.1.1-9.119 [ 109s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 109s] now finalizing build dir... [ 110s] Running build time source services... [ 110s] build target is armv7l-tizen-linux [ 110s] ----------------------------------------------------------------- [ 110s] I have the following modifications for org.tizen.firmware-update-ui.spec: [ 110s] 7c7 [ 110s] < Release: 1 [ 110s] --- [ 110s] > Release: 7.5 [ 110s] ----------------------------------------------------------------- [ 110s] ----- building org.tizen.firmware-update-ui.spec (user abuild) [ 110s] ----------------------------------------------------------------- [ 110s] ----------------------------------------------------------------- [ 110s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/2659bf40db890b4beacec010ea53ade9-org.tizen.firmware-update-ui' -ba /home/abuild/rpmbuild/SOURCES/org.tizen.firmware-update-ui.spec [ 110s] Building target platforms: armv7l-tizen-linux [ 110s] Building for target armv7l-tizen-linux [ 110s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.dQbh88 [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + rm -rf org.tizen.firmware-update-ui-1.0.0 [ 110s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/org.tizen.firmware-update-ui-1.0.0.tar.gz [ 110s] + /bin/tar -xof - [ 110s] + STATUS=0 [ 110s] + '[' 0 -ne 0 ']' [ 110s] + cd org.tizen.firmware-update-ui-1.0.0 [ 110s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 110s] + exit 0 [ 110s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.18xHq7 [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd org.tizen.firmware-update-ui-1.0.0 [ 110s] ++ uname -m [ 110s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 110s] + LANG=C [ 110s] + export LANG [ 110s] + unset DISPLAY [ 110s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 110s] + export CFLAGS [ 110s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 110s] + export CXXFLAGS [ 110s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 110s] + export FFLAGS [ 110s] + LDFLAGS= [ 110s] + export LDFLAGS [ 110s] + exit 0 [ 110s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.orVzh6 [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd org.tizen.firmware-update-ui-1.0.0 [ 110s] + LANG=C [ 110s] + export LANG [ 110s] + unset DISPLAY [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm [ 110s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm [ 110s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm//usr/apps/.preload-tpk [ 110s] + install org.tizen.firmware-update-ui-1.0.0-arm.tpk /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm//usr/apps/.preload-tpk/ [ 110s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 1.0.0-7.5 --unique-debug-src-base org.tizen.firmware-update-ui-1.0.0-7.5.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/org.tizen.firmware-update-ui-1.0.0 [ 111s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/org.tizen.firmware-update-ui-1.0.0/org.tizen.firmware-update-ui-debuginfo.manifest [ 111s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/org.tizen.firmware-update-ui-1.0.0/org.tizen.firmware-update-ui-debugsource.manifest [ 111s] + /usr/lib/rpm/check-buildroot [ 111s] + /usr/lib/rpm//brp-compress [ 111s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 111s] + /usr/lib/rpm/brp-python-hardlink [ 111s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm [ 111s] Processing files: org.tizen.firmware-update-ui-1.0.0-7.5.armv7l [ 111s] Provides: org.tizen.firmware-update-ui = 1.0.0-7.5 org.tizen.firmware-update-ui(armv7l-32) = 1.0.0-7.5 [ 111s] Requires(interp): /bin/sh [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Requires(post): /bin/sh /usr/bin/tpk-backend [ 111s] Processing files: org.tizen.firmware-update-ui-debugsource-1.0.0-7.5.armv7l [ 111s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/org.tizen.firmware-update-ui-1.0.0/debugsourcefiles.list [ 111s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 111s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 111s] [ 111s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm [ 111s] Wrote: /home/abuild/rpmbuild/SRPMS/org.tizen.firmware-update-ui-1.0.0-7.5.src.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.firmware-update-ui-1.0.0-7.5.armv7l.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/org.tizen.firmware-update-ui-debugsource-1.0.0-7.5.armv7l.rpm [ 111s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.oYPo78 [ 111s] + umask 022 [ 111s] + cd /home/abuild/rpmbuild/BUILD [ 111s] + cd org.tizen.firmware-update-ui-1.0.0 [ 111s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/org.tizen.firmware-update-ui-1.0.0-7.5.arm [ 111s] + exit 0 [ 111s] ... checking for files with abuild user/group [ 111s] ... creating baselibs [ 111s] [ 111s] obsnw14 finished "build org.tizen.firmware-update-ui.spec" at Fri May 6 05:38:23 UTC 2022. [ 111s] Retried build at Tue May 17 06:03:57 2022 returned same result, skipped