[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obspw08 started "build _service:gbs:dos2unix.spec" at Sun Apr 23 01:09:50 UTC 2017. [ 0s] [ 0s] Building dos2unix for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '6754f2bec131c1456a9579d3c2fc3482' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:dos2unix.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:dos2unix.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:dos2unix.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 2s] [9/40] preinstalling libbz2... [ 2s] [10/40] preinstalling libcap... [ 2s] [11/40] preinstalling libelf... [ 2s] [12/40] preinstalling libfreebl3... [ 2s] [13/40] preinstalling libgcc... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-aarch64 postinstall script [ 7s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/93] installing libmagic-data-5.28-3.17 [ 8s] [2/93] installing setup-0.9-3.19 [ 8s] [3/93] installing terminfo-base-5.9-3.18 [ 8s] [4/93] installing filesystem-3.1-3.2 [ 8s] [5/93] installing glibc-2.24-3.8 [ 8s] [6/93] installing bash-3.2.57-4.1 [ 8s] [7/93] installing binutils-2.27-4.13 [ 9s] [8/93] installing cpio-2.11-3.3 [ 9s] [9/93] installing diffutils-3.3-3.1 [ 9s] [10/93] installing findutils-4.3.8-3.21 [ 9s] [11/93] installing hostname-3.12-4.1 [ 9s] [12/93] installing libatomic-6.2.1-3.2 [ 9s] [13/93] installing libattr-2.4.47-3.19 [ 9s] [14/93] installing libbz2-1.0.6-4.19 [ 9s] [15/93] installing libcap-2.24-3.16 [ 9s] [16/93] installing libelf-0.153-3.8 [ 9s] [17/93] installing libext2fs-1.42.13-3.3 [ 9s] [18/93] installing libfreebl3-3.23-3.17 [ 9s] [19/93] installing libgcc-6.2.1-3.2 [ 9s] [20/93] installing libgomp-6.2.1-3.2 [ 9s] [21/93] installing libitm-6.2.1-3.2 [ 9s] [22/93] installing libltdl-2.4.2-4.19 [ 9s] [23/93] installing liblua-5.1.4-3.2 [ 9s] [24/93] installing liblzma-5.2.2-3.18 [ 9s] [25/93] installing libpcre-8.39-3.3 [ 9s] [26/93] installing libpopt-1.16-4.3 [ 10s] [27/93] installing libsmack-1.3.0-3.17 [ 10s] [28/93] installing libsmartcols-2.28-3.1 [ 10s] [29/93] installing libsqlite-3.8.10.2-3.3 [ 10s] [30/93] installing libuuid-2.28-3.1 [ 10s] [31/93] installing m4-1.4.17-3.1 [ 10s] [32/93] installing net-tools-2.0_20121208git-3.1 [ 10s] [33/93] installing nspr-4.12-3.3 [ 10s] [34/93] installing patch-2.7-3.3 [ 10s] [35/93] installing pkg-config-0.28-4.20 [ 10s] [36/93] installing sed-4.1c-3.1 [ 10s] [37/93] installing update-alternatives-1.18.15-3.1 [ 10s] [38/93] installing which-2.20-6.1 [ 10s] [39/93] installing zlib-1.2.8-3.23 [ 10s] [40/93] installing libncurses-5.9-3.18 [ 10s] [41/93] installing build-compare-2015.04.28-3.15 [ 10s] [42/93] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 12s] [43/93] installing coreutils-6.9-3.1 [ 12s] [44/93] installing cpp-6.2.1-3.2 [ 13s] [45/93] installing gawk-3.1.5-3.1 [ 13s] [46/93] installing gcc-c++-6.2.1-3.2 [ 13s] [47/93] installing grep-2.5.2-3.1 [ 13s] [48/93] installing less-466-8.1 [ 13s] [49/93] installing libacl-2.2.52-3.26 [ 14s] [50/93] installing libasm-0.153-3.8 [ 14s] [51/93] installing libblkid-2.28-3.1 [ 14s] [52/93] installing libreadline-5.2-3.17 [ 14s] [53/93] installing libstdc++-6.2.1-3.2 [ 14s] [54/93] installing make-4.0-3.2 [ 14s] [55/93] installing nss-certs-3.23-3.17 [ 14s] [56/93] installing procps-ng-3.3.9-3.2 [ 14s] [57/93] installing smack-1.3.0-3.17 [ 14s] [58/93] installing bzip2-1.0.6-4.19 [ 14s] [59/93] installing libmagic-5.28-3.17 [ 14s] [60/93] installing libxml2-2.9.4-4.18 [ 14s] [61/93] installing xz-5.2.2-3.18 [ 14s] [62/93] installing libdw-0.153-3.8 [ 14s] [63/93] installing libstdc++-devel-6.2.1-3.2 [ 15s] [64/93] installing file-5.28-3.17 [ 15s] [65/93] installing libmount-2.28-3.1 [ 15s] [66/93] installing linux-glibc-devel-3.10-3.22 [ 15s] [67/93] installing tar-1.17-3.1 [ 15s] [68/93] installing db4-4.8.30.NC-3.23 [ 15s] [69/93] installing gettext-runtime-0.19.7-3.5 [ 15s] [70/93] installing glibc-locale-2.24-3.8 [ 15s] [71/93] installing gzip-1.3.12-3.16 [ 15s] [72/93] installing libcc1-6.2.1-3.2 [ 15s] [73/93] installing libfdisk1-2.28-3.1 [ 16s] [74/93] installing libubsan-6.2.1-3.2 [ 16s] [75/93] installing pam-1.1.6-3.2 [ 16s] [76/93] installing tzdata-2016i-4.1 [ 16s] [77/93] installing elfutils-0.153-3.8 [ 16s] [78/93] installing glibc-devel-2.24-3.8 [ 16s] [79/93] installing gettext-tools-0.19.7-3.5 [ 16s] [80/93] installing perl-5.20.0-3.86 [ 18s] [81/93] installing gcc-6.2.1-3.2 [ 18s] [82/93] installing util-linux-2.28-3.1 [ 19s] [83/93] installing build-mkbaselibs-20120927-3.1 [ 19s] [84/93] installing qemu-accel-x86_64-aarch64-0.4-3.11 [ 24s] warning: %post(qemu-accel-x86_64-aarch64-0.4-3.11.aarch64) scriptlet failed, exit status 1 [ 24s] [85/93] installing autoconf-2.69-3.25 [ 24s] [86/93] installing util-linux-su-2.28-3.1 [ 24s] [87/93] installing automake-1.14.1-3.16 [ 24s] [88/93] installing build-20120927-3.1 [ 24s] [89/93] installing libtool-2.4.2-4.19 [ 24s] [90/93] installing nss-3.23-3.17 [ 24s] [91/93] installing libsoftokn3-3.23-3.17 [ 24s] [92/93] installing rpm-4.11.0.1-3.16 [ 24s] [93/93] installing rpm-build-4.11.0.1-3.16 [ 24s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 24s] now finalizing build dir... [ 25s] build target is aarch64-tizen-linux [ 25s] ----------------------------------------------------------------- [ 25s] I have the following modifications for dos2unix.spec: [ 25s] 4c4 [ 25s] < Release: 0 [ 25s] --- [ 25s] > Release: 1.6 [ 25s] ----------------------------------------------------------------- [ 25s] ----- building dos2unix.spec (user abuild) [ 25s] ----------------------------------------------------------------- [ 25s] ----------------------------------------------------------------- [ 25s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/6754f2bec131c1456a9579d3c2fc3482-dos2unix' -ba /home/abuild/rpmbuild/SOURCES/dos2unix.spec [ 25s] Building target platforms: aarch64-tizen-linux [ 25s] Building for target aarch64-tizen-linux [ 25s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Hjv0Ee [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + rm -rf dos2unix-6.0 [ 25s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/dos2unix-6.0.tar.gz [ 25s] + /bin/tar -xf - [ 25s] + STATUS=0 [ 25s] + '[' 0 -ne 0 ']' [ 25s] + cd dos2unix-6.0 [ 25s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 25s] + echo 'Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch):' [ 25s] Patch #0 (0001-encoding-is-changed-from-latin1-to-utf8.patch): [ 25s] + /bin/patch -p1 --fuzz=2 [ 25s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-encoding-is-changed-from-latin1-to-utf8.patch [ 25s] patching file man/es/man1/dos2unix.pod [ 25s] patching file man/nl/man1/dos2unix.pod [ 25s] + cp /home/abuild/rpmbuild/SOURCES/dos2unix.manifest . [ 25s] + find . -type f [ 25s] + xargs chmod -x [ 25s] + exit 0 [ 25s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.p07FiG [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd dos2unix-6.0 [ 25s] ++ uname -m [ 25s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 25s] + ref=/usr/lib/rpm [ 25s] + for s in guess sub [ 25s] ++ find -maxdepth 8 -name config.guess [ 25s] + for s in guess sub [ 25s] ++ find -maxdepth 8 -name config.sub [ 25s] + LANG=C [ 25s] + export LANG [ 25s] + unset DISPLAY [ 25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 25s] + export CFLAGS [ 25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 25s] + export CXXFLAGS [ 25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 25s] + export FFLAGS [ 25s] + LDFLAGS= [ 25s] + export LDFLAGS [ 25s] + LD_AS_NEEDED=1 [ 25s] + export LD_AS_NEEDED [ 25s] + export RPM_OPT_FLAGS [ 25s] + make -j8 CC=gcc HTMLEXT=html [ 25s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c dos2unix.c -o dos2unix.o [ 25s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c querycp.c -o querycp.o [ 25s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c common.c -o common.o [ 25s] gcc -DVER_REVISION=\"6.0\" -DVER_DATE=\"2012-05-06\" -DVER_AUTHOR=\"'Erwin Waterlander'\" -DDEBUG=0 -DD2U_UNICODE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DENABLE_NLS -DLOCALEDIR=\"/usr/share/locale\" -DPACKAGE=\"dos2unix\" -O2 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -c unix2dos.c -o unix2dos.o [ 25s] LC_CTYPE=C pod2text man/man1/dos2unix.pod > dos2unix.txt [ 25s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.html [ 25s] msgfmt -c po/de.po -o po/de.mo [ 25s] msgfmt -c po/es.po -o po/es.mo [ 25s] po/es.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 25s] and iconv() does not support "ISO-8859-1". [ 25s] Installing GNU libiconv and then reinstalling GNU gettext [ 25s] would fix this problem. [ 25s] Continuing anyway. [ 25s] po/es.po:8: warning: header field 'Language' still has the initial default value [ 25s] msgfmt -c po/eo.po -o po/eo.mo [ 25s] msgfmt -c po/nl.po -o po/nl.mo [ 25s] po/nl.po: warning: Charset "ISO-8859-1" is not supported. msgfmt relies on iconv(), [ 25s] and iconv() does not support "ISO-8859-1". [ 25s] Installing GNU libiconv and then reinstalling GNU gettext [ 25s] would fix this problem. [ 25s] Continuing anyway. [ 25s] make -C man/man1 [ 25s] make -C man/man1 [ 25s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 25s] # make target - create manual page from a *.pod page [ 25s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 25s] # make target - create manual page from a *.pod page [ 25s] podchecker dos2unix.pod [ 25s] podchecker dos2unix.pod [ 25s] # make target - create manual page from a *.pod page [ 25s] podchecker ../nl/man1/dos2unix.pod [ 25s] make -C man/man1 [ 25s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 25s] # make target - create manual page from a *.pod page [ 25s] podchecker dos2unix.pod [ 26s] # make target - create manual page from a *.pod page [ 26s] podchecker ../nl/man1/dos2unix.pod [ 26s] # make target - create manual page from a *.pod page [ 26s] podchecker ../es/man1/dos2unix.pod [ 26s] gcc unix2dos.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o unix2dos [ 26s] # make target - create manual page from a *.pod page [ 26s] podchecker ../nl/man1/dos2unix.pod [ 26s] dos2unix.pod pod syntax OK. [ 26s] dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] ../nl/man1/dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] ../nl/man1/dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > ../nl/man1/dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] # make target - create manual page from a *.pod page [ 26s] podchecker ../es/man1/dos2unix.pod [ 26s] dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] ../nl/man1/dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] ../nl/man1/dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > ../nl/man1/dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] ../es/man1/dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] ../es/man1/dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > ../es/man1/dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 26s] ../nl/man1/dos2unix.pod pod syntax OK. [ 26s] LC_CTYPE=C pod2man \ [ 26s] --center="$(date "+%Y-%m-%d")" \ [ 26s] --name="dos2unix" \ [ 26s] --section="1" \ [ 26s] ../nl/man1/dos2unix.pod \ [ 26s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 26s] > ../nl/man1/dos2unix.1 && \ [ 26s] rm -f pod*.tmp [ 27s] ../es/man1/dos2unix.pod pod syntax OK. [ 27s] LC_CTYPE=C pod2man \ [ 27s] --center="$(date "+%Y-%m-%d")" \ [ 27s] --name="dos2unix" \ [ 27s] --section="1" \ [ 27s] ../es/man1/dos2unix.pod \ [ 27s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 27s] > ../es/man1/dos2unix.1 && \ [ 27s] rm -f pod*.tmp [ 27s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] dos2unix.1 [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] dos2unix.1 [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../nl/man1/dos2unix.1 [ 27s] gcc dos2unix.o querycp.o common.o -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o dos2unix [ 27s] # make target - create manual page from a *.pod page [ 27s] podchecker ../es/man1/dos2unix.pod [ 27s] ln -sf unix2dos unix2mac [ 27s] ln -sf dos2unix mac2unix [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] dos2unix.1 [ 27s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 27s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../nl/man1/dos2unix.1 [ 27s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../es/man1/dos2unix.1 [ 27s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 27s] ../nl/man1/dos2unix.pod around line 462: Non-ASCII character seen before =encoding in 'België'. Assuming UTF-8 [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../nl/man1/dos2unix.1 [ 27s] ../es/man1/dos2unix.pod pod syntax OK. [ 27s] LC_CTYPE=C pod2man \ [ 27s] --center="$(date "+%Y-%m-%d")" \ [ 27s] --name="dos2unix" \ [ 27s] --section="1" \ [ 27s] ../es/man1/dos2unix.pod \ [ 27s] | sed 's,[Pp]erl v[0-9.]\+,dos2unix,' \ [ 27s] > ../es/man1/dos2unix.1 && \ [ 27s] rm -f pod*.tmp [ 27s] POD document had syntax errors at /bin/pod2man line 71. [ 27s] perl -pli.bak \ [ 27s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 27s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 27s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 27s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 27s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 27s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 27s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 27s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 27s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 27s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 27s] ../es/man1/dos2unix.1 [ 27s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 28s] ../es/man1/dos2unix.pod around line 59: Non-ASCII character seen before =encoding in '[parámetros]'. Assuming UTF-8 [ 28s] POD document had syntax errors at /bin/pod2man line 71. [ 28s] perl -pli.bak \ [ 28s] -e s/A\\\\\\*\'/\\\\[\'A]/g\; \ [ 28s] -e s/a\\\\\\*\'/\\\\[\'a]/g\; \ [ 28s] -e s/E\\\\\\*\'/\\\\[\'E]/g\; \ [ 28s] -e s/e\\\\\\*:/\\\\[:e]/g\; \ [ 28s] -e s/e\\\\\\*\'/\\\\[\'e]/g\; \ [ 28s] -e s/i\\\\\\*\'/\\\\[\'i]/g\; \ [ 28s] -e s/n\\\\\\*~/\\\\[~n]/g\; \ [ 28s] -e s/O\\\\\\*\'/\\\\[\'O]/g\; \ [ 28s] -e s/o\\\\\\*\'/\\\\[\'o]/g\; \ [ 28s] -e s/u\\\\\\*\'/\\\\[\'u]/g\; \ [ 28s] ../es/man1/dos2unix.1 [ 28s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/dos2unix-6.0/man/man1' [ 28s] + exit 0 [ 28s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.V13aGh [ 28s] + umask 022 [ 28s] + cd /home/abuild/rpmbuild/BUILD [ 28s] + cd dos2unix-6.0 [ 28s] + LANG=C [ 28s] + export LANG [ 28s] + unset DISPLAY [ 28s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 [ 28s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 [ 28s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 install [ 28s] pod2html --title="dos2unix 6.0 - DOS/MAC to UNIX and vice versa text file format converter" man/man1/dos2unix.pod > dos2unix.htm [ 29s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/bin [ 29s] install -m 755 dos2unix /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/bin [ 29s] install -m 755 unix2dos /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/bin [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/bin; ln -sf dos2unix mac2unix [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/bin; ln -sf unix2dos unix2mac [ 29s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/man1 [ 29s] install -m 644 man/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/man1 [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/man1; ln -sf dos2unix.1 mac2unix.1 [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2dos.1 [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/man1; ln -sf dos2unix.1 unix2mac.1 [ 29s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/nl/man1/ ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/es/man1/ ; [ 29s] install -m 644 man/nl/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/nl/man1/ ; install -m 644 man/es/man1/dos2unix.1 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/es/man1/ ; [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 mac2unix.1 ; [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2dos.1 ; [ 29s] cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/nl/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; cd /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/man/es/man1/ ; ln -sf dos2unix.1 unix2mac.1 ; [ 29s] -- install-mo [ 29s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/de/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/es/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/eo/LC_MESSAGES ; mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/nl/LC_MESSAGES ; [ 29s] install -m 644 po/de.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/de/LC_MESSAGES/dos2unix.mo ; install -m 644 po/es.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/es/LC_MESSAGES/dos2unix.mo ; install -m 644 po/eo.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/eo/LC_MESSAGES/dos2unix.mo ; install -m 644 po/nl.mo /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/locale/nl/LC_MESSAGES/dos2unix.mo ; [ 29s] -- install-doc [ 29s] mkdir -p -m 755 /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/doc/dos2unix-6.0 [ 29s] install -m 644 README.txt NEWS.txt ChangeLog.txt COPYING.txt TODO.txt BUGS.txt dos2unix.txt dos2unix.htm /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/doc/dos2unix-6.0 [ 29s] + rm -f /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/info/dir [ 29s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 -regex '.*\.la$' [ 29s] + xargs rm -f -- [ 29s] + find /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 -regex '.*\.a$' [ 29s] + xargs rm -f -- docdir=/usr/share/doc/packages/dos2unix [ 29s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 dos2unix --all-name --with-man [ 29s] find: `/home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/share/help/': No such file or directory [ 29s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dos2unix-6.0 [ 30s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/bin/dos2unix [ 30s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64/usr/bin/unix2dos [ 30s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 30s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 30s] 284 blocks [ 30s] + /usr/lib/rpm/check-buildroot [ 30s] + /usr/lib/rpm//brp-compress [ 30s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 30s] + /usr/lib/rpm/brp-python-hardlink [ 30s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 [ 30s] Processing files: dos2unix-6.0-1.6.aarch64 [ 30s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 30s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 30s] [ 30s] Provides: dos2unix = 6.0-1.6 dos2unix(aarch-64) = 6.0-1.6 unix2dos = 6.0 [ 30s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 30s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 30s] Obsoletes: unix2dos < 6.0 [ 30s] Processing files: dos2unix-debugsource-6.0-1.6.aarch64 [ 30s] Provides: dos2unix-debugsource = 6.0-1.6 dos2unix-debugsource(aarch-64) = 6.0-1.6 [ 30s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 30s] Processing files: dos2unix-debuginfo-6.0-1.6.aarch64 [ 30s] warning: File listed twice: /usr/lib/debug/.build-id [ 30s] Provides: dos2unix-debuginfo = 6.0-1.6 dos2unix-debuginfo(aarch-64) = 6.0-1.6 [ 30s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 30s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 [ 30s] warning: Could not canonicalize hostname: obspw08 [ 30s] Wrote: /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-1.6.src.rpm [ 30s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-1.6.aarch64.rpm [ 30s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-1.6.aarch64.rpm [ 30s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-1.6.aarch64.rpm [ 30s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.LiXPIR [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd dos2unix-6.0 [ 30s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dos2unix-6.0-1.6.aarch64 [ 30s] + exit 0 [ 30s] ... checking for files with abuild user/group [ 30s] ... creating baselibs [ 31s] ... comparing built packages with the former built [ 31s] /usr/lib/build/pkg-diff.sh [ 31s] different number of subpackages [ 31s] /.build.oldpackages/dos2unix-debuginfo-6.0-1.5.aarch64.rpm [ 31s] /.build.oldpackages/dos2unix-6.0-1.5.aarch64.rpm [ 31s] /.build.oldpackages/dos2unix-6.0-1.3.aarch64.rpm [ 31s] /.build.oldpackages/dos2unix-debuginfo-6.0-1.3.aarch64.rpm [ 31s] /.build.oldpackages/dos2unix-debugsource-6.0-1.3.aarch64.rpm [ 31s] /.build.oldpackages/dos2unix-debugsource-6.0-1.5.aarch64.rpm [ 31s] /.build.oldpackages/dos2unix-6.0-1.3.src.rpm [ 31s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debuginfo-6.0-1.6.aarch64.rpm [ 31s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-6.0-1.6.aarch64.rpm [ 31s] /home/abuild/rpmbuild/RPMS/aarch64/dos2unix-debugsource-6.0-1.6.aarch64.rpm [ 31s] /home/abuild/rpmbuild/SRPMS/dos2unix-6.0-1.6.src.rpm [ 31s] [ 31s] obspw08 finished "build dos2unix.spec" at Sun Apr 23 01:10:21 UTC 2017. [ 31s]