[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw07 started "build _service:gbs:zeromq.spec" at Sun Apr 23 01:02:12 UTC 2017. [ 0s] [ 0s] Building zeromq for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 'a7a2f5855b68251dd5c6bde0c6f8f526' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:zeromq.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:zeromq.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:zeromq.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-aarch64 postinstall script [ 7s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/92] installing libmagic-data-5.28-3.17 [ 7s] [2/92] installing setup-0.9-3.19 [ 7s] [3/92] installing terminfo-base-5.9-3.18 [ 7s] [4/92] installing filesystem-3.1-3.2 [ 7s] [5/92] installing glibc-2.24-3.8 [ 7s] [6/92] installing bash-3.2.57-4.1 [ 7s] [7/92] installing binutils-2.27-4.13 [ 8s] [8/92] installing cpio-2.11-3.3 [ 8s] [9/92] installing diffutils-3.3-3.1 [ 8s] [10/92] installing findutils-4.3.8-3.21 [ 8s] [11/92] installing hostname-3.12-4.1 [ 8s] [12/92] installing libatomic-6.2.1-3.2 [ 8s] [13/92] installing libattr-2.4.47-3.19 [ 8s] [14/92] installing libbz2-1.0.6-4.19 [ 8s] [15/92] installing libcap-2.24-3.16 [ 8s] [16/92] installing libelf-0.153-3.8 [ 8s] [17/92] installing libext2fs-1.42.13-3.3 [ 8s] [18/92] installing libfreebl3-3.23-3.17 [ 8s] [19/92] installing libgcc-6.2.1-3.2 [ 8s] [20/92] installing libgomp-6.2.1-3.2 [ 8s] [21/92] installing libitm-6.2.1-3.2 [ 8s] [22/92] installing libltdl-2.4.2-4.19 [ 9s] [23/92] installing liblua-5.1.4-3.2 [ 9s] [24/92] installing liblzma-5.2.2-3.18 [ 9s] [25/92] installing libpcre-8.39-3.3 [ 9s] [26/92] installing libpopt-1.16-4.3 [ 9s] [27/92] installing libsmack-1.3.0-3.17 [ 9s] [28/92] installing libsmartcols-2.28-3.1 [ 9s] [29/92] installing libsqlite-3.8.10.2-3.3 [ 9s] [30/92] installing libuuid-2.28-3.1 [ 9s] [31/92] installing m4-1.4.17-3.1 [ 9s] [32/92] installing net-tools-2.0_20121208git-3.1 [ 9s] [33/92] installing nspr-4.12-3.3 [ 9s] [34/92] installing patch-2.7-3.3 [ 9s] [35/92] installing pkg-config-0.28-4.20 [ 9s] [36/92] installing sed-4.1c-3.1 [ 9s] [37/92] installing update-alternatives-1.18.15-3.1 [ 9s] [38/92] installing which-2.20-6.1 [ 9s] [39/92] installing zlib-1.2.8-3.23 [ 9s] [40/92] installing libncurses-5.9-3.18 [ 9s] [41/92] installing build-compare-2015.04.28-3.15 [ 9s] [42/92] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 10s] [43/92] installing coreutils-6.9-3.1 [ 10s] [44/92] installing cpp-6.2.1-3.2 [ 11s] [45/92] installing gawk-3.1.5-3.1 [ 11s] [46/92] installing gcc-c++-6.2.1-3.2 [ 12s] [47/92] installing grep-2.5.2-3.1 [ 12s] [48/92] installing less-466-8.1 [ 12s] [49/92] installing libacl-2.2.52-3.26 [ 12s] [50/92] installing libasm-0.153-3.8 [ 12s] [51/92] installing libblkid-2.28-3.1 [ 12s] [52/92] installing libreadline-5.2-3.17 [ 12s] [53/92] installing libstdc++-6.2.1-3.2 [ 12s] [54/92] installing libuuid-devel-2.28-3.1 [ 12s] [55/92] installing make-4.0-3.2 [ 12s] [56/92] installing nss-certs-3.23-3.17 [ 12s] [57/92] installing procps-ng-3.3.9-3.2 [ 12s] [58/92] installing smack-1.3.0-3.17 [ 12s] [59/92] installing bzip2-1.0.6-4.19 [ 12s] [60/92] installing libmagic-5.28-3.17 [ 12s] [61/92] installing libxml2-2.9.4-4.18 [ 12s] [62/92] installing xz-5.2.2-3.18 [ 12s] [63/92] installing libdw-0.153-3.8 [ 12s] [64/92] installing libstdc++-devel-6.2.1-3.2 [ 13s] [65/92] installing file-5.28-3.17 [ 13s] [66/92] installing libmount-2.28-3.1 [ 13s] [67/92] installing linux-glibc-devel-3.10-3.22 [ 13s] [68/92] installing tar-1.17-3.1 [ 13s] [69/92] installing db4-4.8.30.NC-3.23 [ 13s] [70/92] installing glibc-locale-2.24-3.8 [ 13s] [71/92] installing gzip-1.3.12-3.16 [ 14s] [72/92] installing libcc1-6.2.1-3.2 [ 14s] [73/92] installing libfdisk1-2.28-3.1 [ 14s] [74/92] installing libubsan-6.2.1-3.2 [ 14s] [75/92] installing pam-1.1.6-3.2 [ 14s] [76/92] installing tzdata-2016i-4.1 [ 14s] [77/92] installing elfutils-0.153-3.8 [ 14s] [78/92] installing glibc-devel-2.24-3.8 [ 14s] [79/92] installing perl-5.20.0-3.86 [ 15s] [80/92] installing gcc-6.2.1-3.2 [ 16s] [81/92] installing util-linux-2.28-3.1 [ 16s] [82/92] installing build-mkbaselibs-20120927-3.1 [ 16s] [83/92] installing qemu-accel-x86_64-aarch64-0.4-3.11 [ 21s] warning: %post(qemu-accel-x86_64-aarch64-0.4-3.11.aarch64) scriptlet failed, exit status 1 [ 21s] [84/92] installing autoconf-2.69-3.25 [ 21s] [85/92] installing util-linux-su-2.28-3.1 [ 21s] [86/92] installing automake-1.14.1-3.16 [ 21s] [87/92] installing build-20120927-3.1 [ 21s] [88/92] installing libtool-2.4.2-4.19 [ 21s] [89/92] installing nss-3.23-3.17 [ 22s] [90/92] installing libsoftokn3-3.23-3.17 [ 22s] [91/92] installing rpm-4.11.0.1-3.16 [ 22s] [92/92] installing rpm-build-4.11.0.1-3.16 [ 22s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 22s] now finalizing build dir... [ 22s] build target is aarch64-tizen-linux [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for zeromq.spec: [ 22s] 4c4 [ 22s] < Release: 0 [ 22s] --- [ 22s] > Release: 2.1 [ 22s] 90a91 [ 22s] > %changelog [ 22s] ----------------------------------------------------------------- [ 22s] ----- building zeromq.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 23s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/a7a2f5855b68251dd5c6bde0c6f8f526-zeromq' -ba /home/abuild/rpmbuild/SOURCES/zeromq.spec [ 23s] Building target platforms: aarch64-tizen-linux [ 23s] Building for target aarch64-tizen-linux [ 23s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pjB5dg [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + rm -rf zeromq-4.0.4 [ 23s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/zeromq-4.0.4.tar.gz [ 23s] + /bin/tar -xf - [ 23s] + STATUS=0 [ 23s] + '[' 0 -ne 0 ']' [ 23s] + cd zeromq-4.0.4 [ 23s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 23s] + cp /home/abuild/rpmbuild/SOURCES/zeromq.manifest . [ 23s] + exit 0 [ 23s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QBCY1g [ 23s] + umask 022 [ 23s] + cd /home/abuild/rpmbuild/BUILD [ 23s] + cd zeromq-4.0.4 [ 23s] ++ uname -m [ 23s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 23s] + ref=/usr/lib/rpm [ 23s] + for s in guess sub [ 23s] ++ find -maxdepth 8 -name config.guess [ 23s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 23s] + grep -q config-patches@ ./config/config.guess [ 23s] + grep -q aarch64 ./config/config.guess [ 23s] + grep -q ppc64le ./config/config.guess [ 23s] + install -m 755 /usr/lib/rpm/config.guess ./config/config.guess [ 23s] + for s in guess sub [ 23s] ++ find -maxdepth 8 -name config.sub [ 23s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 23s] + grep -q config-patches@ ./config/config.sub [ 23s] + grep -q aarch64 ./config/config.sub [ 23s] + grep -q ppc64le ./config/config.sub [ 23s] + LANG=C [ 23s] + export LANG [ 23s] + unset DISPLAY [ 23s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 23s] + export CFLAGS [ 23s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 23s] + export CXXFLAGS [ 23s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 23s] + export FFLAGS [ 23s] + LDFLAGS= [ 23s] + export LDFLAGS [ 23s] + LD_AS_NEEDED=1 [ 23s] + export LD_AS_NEEDED [ 23s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 23s] + export CFLAGS [ 23s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 23s] + export CXXFLAGS [ 23s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 23s] + export FFLAGS [ 23s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 23s] checking for a BSD-compatible install... /bin/install -c [ 24s] checking whether build environment is sane... yes [ 24s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 24s] checking for gawk... gawk [ 24s] checking whether make sets $(MAKE)... yes [ 24s] checking how to create a ustar tar archive... gnutar [ 24s] checking whether make supports nested variables... yes [ 24s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 24s] checking whether the C compiler works... yes [ 24s] checking for C compiler default output file name... a.out [ 24s] checking for suffix of executables... [ 24s] checking whether we are cross compiling... no [ 24s] checking for suffix of object files... o [ 24s] checking whether we are using the GNU C compiler... yes [ 24s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 24s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 24s] checking for style of include used by make... GNU [ 24s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 24s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C99... none needed [ 24s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 24s] checking whether we are using the GNU C++ compiler... yes [ 24s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 25s] checking dependency style of aarch64-tizen-linux-gnu-g++... gcc3 [ 25s] checking whether aarch64-tizen-linux-gnu-gcc and cc understand -c and -o together... yes [ 25s] checking for a sed that does not truncate output... /bin/sed [ 25s] checking for gawk... (cached) gawk [ 25s] checking for xmlto... no [ 25s] checking for asciidoc... no [ 25s] checking build system type... aarch64-tizen-linux-gnu [ 25s] checking host system type... aarch64-tizen-linux-gnu [ 25s] checking how to print strings... printf [ 25s] checking for a sed that does not truncate output... (cached) /bin/sed [ 25s] checking for grep that handles long lines and -e... /bin/grep [ 25s] checking for egrep... /bin/grep -E [ 25s] checking for fgrep... /bin/grep -F [ 25s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 25s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 25s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 25s] checking the name lister (/bin/nm -B) interface... BSD nm [ 25s] checking whether ln -s works... yes [ 25s] checking the maximum length of command line arguments... 1572864 [ 25s] checking whether the shell understands some XSI constructs... yes [ 25s] checking whether the shell understands "+="... yes [ 25s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 25s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 25s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 25s] checking for aarch64-tizen-linux-gnu-objdump... objdump [ 25s] checking how to recognize dependent libraries... pass_all [ 25s] checking for aarch64-tizen-linux-gnu-dlltool... dlltool [ 25s] checking how to associate runtime and link libraries... printf %s\n [ 25s] checking for aarch64-tizen-linux-gnu-ar... no [ 25s] checking for ar... ar [ 25s] checking for archiver @FILE support... @ [ 25s] checking for aarch64-tizen-linux-gnu-strip... no [ 25s] checking for strip... strip [ 25s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 25s] checking for ranlib... ranlib [ 25s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 25s] checking for sysroot... no [ 25s] checking for aarch64-tizen-linux-gnu-mt... no [ 25s] checking for mt... no [ 25s] checking if : is a manifest tool... no [ 25s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 25s] checking for ANSI C header files... yes [ 25s] checking for sys/types.h... yes [ 25s] checking for sys/stat.h... yes [ 25s] checking for stdlib.h... yes [ 25s] checking for string.h... yes [ 25s] checking for memory.h... yes [ 25s] checking for strings.h... yes [ 25s] checking for inttypes.h... yes [ 25s] checking for stdint.h... yes [ 25s] checking for unistd.h... yes [ 25s] checking for dlfcn.h... yes [ 25s] checking for objdir... .libs [ 25s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 25s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 25s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 25s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 26s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 26s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 26s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 26s] checking whether -lc should be explicitly linked in... no [ 26s] checking dynamic linker characteristics... GNU/Linux ld.so [ 26s] checking how to hardcode library paths into programs... immediate [ 26s] checking whether stripping libraries is possible... yes [ 26s] checking if libtool supports shared libraries... yes [ 26s] checking whether to build shared libraries... yes [ 26s] checking whether to build static libraries... yes [ 26s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 26s] checking for ld used by aarch64-tizen-linux-gnu-g++... /usr/aarch64-tizen-linux-gnu/bin/ld [ 26s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 26s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 26s] checking for aarch64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 26s] checking if aarch64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 26s] checking if aarch64-tizen-linux-gnu-g++ static flag -static works... no [ 26s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 26s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 26s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 26s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 26s] checking how to hardcode library paths into programs... immediate [ 26s] checking whether the C compiler works... yes [ 26s] checking whether we are using Intel C compiler... no [ 26s] checking whether we are using Sun Studio C compiler... no [ 26s] checking whether we are using clang C compiler... no [ 26s] checking whether we are using gcc >= 4 C compiler... yes [ 26s] checking whether the C++ compiler works... yes [ 26s] checking whether we are using Intel C++ compiler... no [ 26s] checking whether we are using Sun Studio C++ compiler... no [ 26s] checking whether we are using clang C++ compiler... no [ 26s] checking whether we are using gcc >= 4 C++ compiler... yes [ 26s] checking whether to enable debugging information... no [ 26s] checking whether to enable code coverage... no [ 26s] checking for pthread_create in -lpthread... yes [ 26s] checking for clock_gettime in -lrt... yes [ 26s] checking for sodium_init in -lsodium... no [ 26s] configure: WARNING: libsodium is needed for CURVE security [ 26s] checking whether C++ compiler supports -fvisibility=hidden... yes [ 26s] checking whether C++ compiler supports dso visibility... yes [ 26s] checking for asciidoc... no [ 26s] checking for xmlto... no [ 26s] checking whether to build documentation... no [ 26s] checking whether to install manpages... yes [ 26s] checking for suitable polling system... using epoll [ 26s] checking for ANSI C header files... (cached) yes [ 26s] checking errno.h usability... yes [ 26s] checking errno.h presence... yes [ 26s] checking for errno.h... yes [ 26s] checking arpa/inet.h usability... yes [ 26s] checking arpa/inet.h presence... yes [ 26s] checking for arpa/inet.h... yes [ 26s] checking netinet/tcp.h usability... yes [ 26s] checking netinet/tcp.h presence... yes [ 26s] checking for netinet/tcp.h... yes [ 26s] checking netinet/in.h usability... yes [ 26s] checking netinet/in.h presence... yes [ 26s] checking for netinet/in.h... yes [ 27s] checking stddef.h usability... yes [ 27s] checking stddef.h presence... yes [ 27s] checking for stddef.h... yes [ 27s] checking for stdlib.h... (cached) yes [ 27s] checking for string.h... (cached) yes [ 27s] checking sys/socket.h usability... yes [ 27s] checking sys/socket.h presence... yes [ 27s] checking for sys/socket.h... yes [ 27s] checking sys/time.h usability... yes [ 27s] checking sys/time.h presence... yes [ 27s] checking for sys/time.h... yes [ 27s] checking time.h usability... yes [ 27s] checking time.h presence... yes [ 27s] checking for time.h... yes [ 27s] checking for unistd.h... (cached) yes [ 27s] checking limits.h usability... yes [ 27s] checking limits.h presence... yes [ 27s] checking for limits.h... yes [ 27s] checking ifaddrs.h usability... yes [ 27s] checking ifaddrs.h presence... yes [ 27s] checking for ifaddrs.h... yes [ 27s] checking sys/uio.h usability... yes [ 27s] checking sys/uio.h presence... yes [ 27s] checking for sys/uio.h... yes [ 27s] checking sys/eventfd.h usability... yes [ 27s] checking sys/eventfd.h presence... yes [ 27s] checking for sys/eventfd.h... yes [ 27s] checking for stdbool.h that conforms to C99... no [ 27s] checking for _Bool... no [ 27s] checking for an ANSI C-conforming const... yes [ 27s] checking for inline... inline [ 27s] checking for size_t... yes [ 27s] checking for ssize_t... yes [ 27s] checking whether time.h and sys/time.h may both be included... yes [ 27s] checking for uint32_t... yes [ 27s] checking for working volatile... yes [ 27s] checking how to enable additional warnings for C++ compiler... -Wall [ 27s] checking how to turn warnings to errors in C++ compiler... -Werror [ 27s] checking how to enable strict standards compliance in C++ compiler... -pedantic [ 27s] checking return type of signal handlers... void [ 27s] checking for perror... yes [ 27s] checking for gettimeofday... yes [ 27s] checking for clock_gettime... yes [ 27s] checking for memset... yes [ 28s] checking for socket... yes [ 28s] checking for getifaddrs... yes [ 28s] checking for freeifaddrs... yes [ 28s] checking for fork... yes [ 28s] checking alloca.h usability... yes [ 28s] checking alloca.h presence... yes [ 28s] checking for alloca.h... yes [ 28s] checking whether SOCK_CLOEXEC is supported... yes [ 28s] checking whether SO_KEEPALIVE is supported... yes [ 28s] checking whether TCP_KEEPCNT is supported... yes [ 28s] checking whether TCP_KEEPIDLE is supported... yes [ 28s] checking whether TCP_KEEPINTVL is supported... yes [ 28s] checking whether TCP_KEEPALIVE is supported... no [ 28s] configure: creating ./config.status [ 29s] config.status: creating Makefile [ 29s] config.status: creating src/Makefile [ 29s] config.status: creating src/libzmq.pc [ 29s] config.status: creating doc/Makefile [ 29s] config.status: creating perf/Makefile [ 29s] config.status: creating tests/Makefile [ 29s] config.status: creating tools/Makefile [ 29s] config.status: creating builds/msvc/Makefile [ 29s] config.status: creating foreign/openpgm/Makefile [ 29s] config.status: creating builds/redhat/zeromq.spec [ 29s] config.status: creating src/platform.hpp [ 29s] config.status: executing depfiles commands [ 31s] config.status: executing libtool commands [ 31s] + /bin/make -j4 [ 31s] Making all in src [ 31s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 31s] /bin/make all-am [ 31s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 31s] CXX libzmq_la-address.lo [ 31s] CXX libzmq_la-clock.lo [ 31s] CXX libzmq_la-ctx.lo [ 31s] CXX libzmq_la-curve_client.lo [ 31s] CXX libzmq_la-curve_server.lo [ 31s] CXX libzmq_la-devpoll.lo [ 31s] CXX libzmq_la-dist.lo [ 32s] CXX libzmq_la-epoll.lo [ 32s] CXX libzmq_la-err.lo [ 32s] CXX libzmq_la-fq.lo [ 32s] CXX libzmq_la-io_object.lo [ 32s] CXX libzmq_la-io_thread.lo [ 33s] CXX libzmq_la-ip.lo [ 33s] CXX libzmq_la-ipc_address.lo [ 33s] CXX libzmq_la-ipc_connecter.lo [ 33s] CXX libzmq_la-ipc_listener.lo [ 33s] CXX libzmq_la-kqueue.lo [ 34s] CXX libzmq_la-lb.lo [ 34s] CXX libzmq_la-mailbox.lo [ 34s] CXX libzmq_la-mechanism.lo [ 34s] CXX libzmq_la-msg.lo [ 35s] CXX libzmq_la-mtrie.lo [ 35s] CXX libzmq_la-null_mechanism.lo [ 35s] CXX libzmq_la-object.lo [ 35s] CXX libzmq_la-options.lo [ 36s] CXX libzmq_la-own.lo [ 36s] CXX libzmq_la-pair.lo [ 36s] CXX libzmq_la-pgm_receiver.lo [ 36s] CXX libzmq_la-pgm_sender.lo [ 36s] CXX libzmq_la-pgm_socket.lo [ 36s] CXX libzmq_la-pipe.lo [ 36s] CXX libzmq_la-plain_mechanism.lo [ 37s] CXX libzmq_la-poll.lo [ 37s] CXX libzmq_la-poller_base.lo [ 37s] CXX libzmq_la-pull.lo [ 37s] CXX libzmq_la-push.lo [ 38s] CXX libzmq_la-proxy.lo [ 38s] CXX libzmq_la-reaper.lo [ 38s] CXX libzmq_la-pub.lo [ 38s] CXX libzmq_la-random.lo [ 38s] CXX libzmq_la-rep.lo [ 38s] CXX libzmq_la-req.lo [ 39s] CXX libzmq_la-select.lo [ 39s] CXX libzmq_la-session_base.lo [ 39s] CXX libzmq_la-signaler.lo [ 39s] CXX libzmq_la-socket_base.lo [ 39s] CXX libzmq_la-stream.lo [ 40s] CXX libzmq_la-stream_engine.lo [ 40s] CXX libzmq_la-sub.lo [ 41s] CXX libzmq_la-tcp.lo [ 41s] CXX libzmq_la-tcp_address.lo [ 41s] CXX libzmq_la-tcp_connecter.lo [ 41s] CXX libzmq_la-tcp_listener.lo [ 42s] CXX libzmq_la-thread.lo [ 42s] CXX libzmq_la-trie.lo [ 42s] CXX libzmq_la-xpub.lo [ 42s] CXX libzmq_la-router.lo [ 43s] CXX libzmq_la-dealer.lo [ 43s] CXX libzmq_la-v1_decoder.lo [ 43s] CXX libzmq_la-v1_encoder.lo [ 43s] CXX libzmq_la-v2_decoder.lo [ 43s] CXX libzmq_la-v2_encoder.lo [ 44s] CXX libzmq_la-xsub.lo [ 44s] CXX libzmq_la-zmq.lo [ 44s] CXX libzmq_la-zmq_utils.lo [ 44s] CXX libzmq_la-raw_decoder.lo [ 44s] CXX libzmq_la-raw_encoder.lo [ 45s] CXXLD libzmq.la [ 45s] .libs/libzmq_la-ipc_listener.o: In function `zmq::ipc_listener_t::set_address(char const*)': [ 45s] /home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src/ipc_listener.cpp:127: warning: the use of `tempnam' is dangerous, better use `mkstemp' [ 45s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 45s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 45s] Making all in doc [ 45s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/doc' [ 45s] make[1]: Nothing to be done for 'all'. [ 45s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/doc' [ 45s] Making all in perf [ 45s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/perf' [ 45s] CXX local_lat.o [ 45s] CXX remote_lat.o [ 45s] CXX local_thr.o [ 45s] CXX remote_thr.o [ 45s] CXX inproc_lat.o [ 45s] CXX inproc_thr.o [ 46s] CXXLD local_lat [ 46s] CXXLD remote_lat [ 46s] CXXLD local_thr [ 46s] CXXLD remote_thr [ 46s] CXXLD inproc_lat [ 46s] CXXLD inproc_thr [ 46s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/perf' [ 46s] Making all in tests [ 46s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tests' [ 46s] CXX test_system.o [ 46s] CXX test_pair_inproc.o [ 46s] CXX test_pair_tcp.o [ 46s] CXX test_reqrep_inproc.o [ 46s] CXX test_reqrep_tcp.o [ 46s] CXX test_hwm.o [ 46s] CXX test_reqrep_device.o [ 46s] CXX test_sub_forward.o [ 46s] CXX test_invalid_rep.o [ 46s] CXX test_msg_flags.o [ 46s] CXX test_connect_resolve.o [ 46s] CXX test_immediate.o [ 47s] CXX test_last_endpoint.o [ 47s] CXX test_term_endpoint.o [ 47s] CXX test_monitor.o [ 47s] CXX test_router_mandatory.o [ 47s] CXX test_router_raw_empty.o [ 47s] CXX test_probe_router.o [ 47s] CXX test_stream.o [ 47s] CXX test_disconnect_inproc.o [ 47s] CXX test_ctx_options.o [ 47s] CXX test_ctx_destroy.o [ 47s] CXX test_security_null.o [ 47s] CXX test_security_plain.o [ 48s] CXX test_security_curve.o [ 48s] CXX test_iov.o [ 48s] CXX test_spec_req.o [ 48s] CXX test_spec_rep.o [ 48s] CXX test_spec_dealer.o [ 48s] CXX test_spec_router.o [ 48s] CXX test_spec_pushpull.o [ 48s] CXX test_req_correlate.o [ 48s] CXX test_req_relaxed.o [ 48s] CXX test_conflate.o [ 48s] CXX test_inproc_connect.o [ 48s] CXX test_issue_566.o [ 48s] CXX test_abstract_ipc.o [ 49s] CXX test_many_sockets.o [ 49s] CXX test_shutdown_stress.o [ 49s] CXX test_pair_ipc.o [ 49s] CXX test_reqrep_ipc.o [ 49s] CXX test_timeo.o [ 49s] CXX test_fork.o [ 49s] CXXLD test_system [ 49s] CXXLD test_pair_inproc [ 49s] CXXLD test_pair_tcp [ 49s] CXXLD test_reqrep_inproc [ 49s] CXXLD test_reqrep_tcp [ 49s] CXXLD test_hwm [ 49s] CXXLD test_reqrep_device [ 49s] CXXLD test_sub_forward [ 49s] CXXLD test_invalid_rep [ 49s] CXXLD test_msg_flags [ 49s] CXXLD test_connect_resolve [ 50s] CXXLD test_immediate [ 50s] CXXLD test_last_endpoint [ 50s] CXXLD test_term_endpoint [ 50s] CXXLD test_monitor [ 50s] CXXLD test_router_mandatory [ 50s] CXXLD test_router_raw_empty [ 50s] CXXLD test_probe_router [ 50s] CXXLD test_stream [ 50s] CXXLD test_disconnect_inproc [ 50s] CXXLD test_ctx_options [ 50s] CXXLD test_ctx_destroy [ 50s] CXXLD test_security_null [ 50s] CXXLD test_security_plain [ 50s] CXXLD test_security_curve [ 50s] CXXLD test_iov [ 50s] CXXLD test_spec_req [ 50s] CXXLD test_spec_rep [ 50s] CXXLD test_spec_dealer [ 50s] CXXLD test_spec_router [ 50s] CXXLD test_spec_pushpull [ 50s] CXXLD test_req_correlate [ 50s] CXXLD test_req_relaxed [ 50s] CXXLD test_conflate [ 50s] CXXLD test_inproc_connect [ 50s] CXXLD test_issue_566 [ 50s] CXXLD test_abstract_ipc [ 50s] CXXLD test_many_sockets [ 50s] CXXLD test_shutdown_stress [ 50s] CXXLD test_pair_ipc [ 50s] CXXLD test_reqrep_ipc [ 51s] CXXLD test_timeo [ 51s] CXXLD test_fork [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tests' [ 51s] Making all in tools [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tools' [ 51s] CC curve_keygen.o [ 51s] CCLD curve_keygen [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tools' [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4' [ 51s] make[1]: Nothing to be done for 'all-am'. [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4' [ 51s] + exit 0 [ 51s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.a3iQXI [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd zeromq-4.0.4 [ 51s] + LANG=C [ 51s] + export LANG [ 51s] + unset DISPLAY [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 [ 51s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 [ 51s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 install [ 51s] Making install in src [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 51s] test -z "/usr/lib64" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64" [ 51s] /bin/sh ../libtool --mode=install /bin/install -c libzmq.la '/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64' [ 51s] libtool: install: /bin/install -c .libs/libzmq.so.3.1.0 /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/libzmq.so.3.1.0 [ 51s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64 && { ln -s -f libzmq.so.3.1.0 libzmq.so.3 || { rm -f libzmq.so.3 && ln -s libzmq.so.3.1.0 libzmq.so.3; }; }) [ 51s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64 && { ln -s -f libzmq.so.3.1.0 libzmq.so || { rm -f libzmq.so && ln -s libzmq.so.3.1.0 libzmq.so; }; }) [ 51s] libtool: install: /bin/install -c .libs/libzmq.lai /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/libzmq.la [ 51s] libtool: install: /bin/install -c .libs/libzmq.a /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/libzmq.a [ 51s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/libzmq.a [ 51s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/libzmq.a [ 51s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 51s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/include" [ 51s] /bin/install -c -m 644 ../include/zmq.h ../include/zmq_utils.h '/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/include' [ 51s] test -z "/usr/lib64/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/pkgconfig" [ 51s] /bin/install -c -m 644 libzmq.pc '/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/pkgconfig' [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/src' [ 51s] Making install in doc [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/doc' [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/doc' [ 51s] make[2]: Nothing to be done for 'install-exec-am'. [ 51s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/man/man3" [ 51s] /bin/install -c -m 644 zmq_bind.3 zmq_unbind.3 zmq_connect.3 zmq_disconnect.3 zmq_close.3 zmq_ctx_new.3 zmq_ctx_term.3 zmq_ctx_destroy.3 zmq_ctx_get.3 zmq_ctx_set.3 zmq_msg_init.3 zmq_msg_init_data.3 zmq_msg_init_size.3 zmq_msg_move.3 zmq_msg_copy.3 zmq_msg_size.3 zmq_msg_data.3 zmq_msg_close.3 zmq_msg_send.3 zmq_msg_recv.3 zmq_send.3 zmq_recv.3 zmq_send_const.3 zmq_msg_get.3 zmq_msg_set.3 zmq_msg_more.3 zmq_getsockopt.3 zmq_setsockopt.3 zmq_socket.3 zmq_socket_monitor.3 zmq_poll.3 zmq_errno.3 zmq_strerror.3 zmq_version.3 zmq_proxy.3 zmq_sendmsg.3 zmq_recvmsg.3 zmq_init.3 zmq_term.3 zmq_z85_encode.3 '/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/man/man3' [ 51s] /bin/install -c -m 644 zmq_z85_decode.3 zmq_curve_keypair.3 '/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/man/man3' [ 51s] test -z "/usr/share/man/man7" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/man/man7" [ 51s] /bin/install -c -m 644 zmq.7 zmq_tcp.7 zmq_pgm.7 zmq_epgm.7 zmq_inproc.7 zmq_ipc.7 zmq_null.7 zmq_plain.7 zmq_curve.7 '/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/man/man7' [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/doc' [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/doc' [ 51s] Making install in perf [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/perf' [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/perf' [ 51s] make[2]: Nothing to be done for 'install-exec-am'. [ 51s] make[2]: Nothing to be done for 'install-data-am'. [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/perf' [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/perf' [ 51s] Making install in tests [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tests' [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tests' [ 51s] make[2]: Nothing to be done for 'install-exec-am'. [ 51s] make[2]: Nothing to be done for 'install-data-am'. [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tests' [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tests' [ 51s] Making install in tools [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tools' [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tools' [ 51s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/bin" [ 51s] /bin/sh ../libtool --mode=install /bin/install -c curve_keygen '/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/bin' [ 51s] libtool: install: warning: `../src/libzmq.la' has not been installed in `/usr/lib64' [ 51s] libtool: install: /bin/install -c .libs/curve_keygen /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/bin/curve_keygen [ 51s] make[2]: Nothing to be done for 'install-data-am'. [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tools' [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4/tools' [ 51s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4' [ 51s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4' [ 51s] make[2]: Nothing to be done for 'install-exec-am'. [ 51s] make[2]: Nothing to be done for 'install-data-am'. [ 51s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4' [ 51s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/zeromq-4.0.4' [ 51s] + rm -f /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/info/dir [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 -regex '.*\.la$' [ 51s] + xargs rm -f -- [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 -regex '.*\.a$' [ 51s] + xargs rm -f -- [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/info [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/doc/packages [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/doc/zeromq [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/doc/zeromq-4.0.4 [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/gtk-doc [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/doc [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/man [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 51s] + xargs rm -f -- [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 51s] + xargs rm -f -- [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 51s] + xargs rm -f -- [ 51s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/zeromq-4.0.4 [ 51s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/bin/curve_keygen [ 52s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/lib64/libzmq.so.3.1.0 [ 52s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 52s] 1329 blocks [ 52s] + /usr/lib/rpm/check-buildroot [ 52s] + /usr/lib/rpm//brp-compress [ 52s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 52s] + /usr/lib/rpm/brp-python-hardlink [ 52s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 [ 52s] Processing files: zeromq-debugsource-4.0.4-2.1.aarch64 [ 52s] Provides: zeromq-debugsource = 4.0.4-2.1 zeromq-debugsource(aarch-64) = 4.0.4-2.1 [ 52s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 52s] Processing files: libzmq-4.0.4-2.1.aarch64 [ 52s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 52s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 52s] [ 52s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.n8LxKe [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd zeromq-4.0.4 [ 52s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/licenses/libzmq [ 52s] + export LICENSEDIR [ 52s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/licenses/libzmq [ 52s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/licenses/libzmq [ 52s] + cp -pr COPYING.LESSER /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64/usr/share/licenses/libzmq [ 52s] + exit 0 [ 52s] Provides: libzmq = 4.0.4-2.1 libzmq(aarch-64) = 4.0.4-2.1 libzmq.so.3()(64bit) [ 52s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Requires(post): /sbin/ldconfig [ 52s] Requires(postun): /sbin/ldconfig [ 52s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.17)(64bit) librt.so.1()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.20)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) libzmq.so.3()(64bit) [ 52s] Processing files: zeromq-devel-4.0.4-2.1.aarch64 [ 52s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 52s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 52s] [ 52s] Provides: pkgconfig(libzmq) = 4.0.4 zeromq-devel = 4.0.4-2.1 zeromq-devel(aarch-64) = 4.0.4-2.1 [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Requires: /usr/bin/pkg-config libzmq.so.3()(64bit) [ 52s] Processing files: libzmq-debuginfo-4.0.4-2.1.aarch64 [ 52s] warning: File listed twice: /usr/lib/debug/.build-id [ 52s] Provides: libzmq-debuginfo = 4.0.4-2.1 libzmq-debuginfo(aarch-64) = 4.0.4-2.1 [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 [ 52s] warning: Could not canonicalize hostname: obsnw07 [ 52s] Wrote: /home/abuild/rpmbuild/SRPMS/zeromq-4.0.4-2.1.src.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/zeromq-debugsource-4.0.4-2.1.aarch64.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libzmq-4.0.4-2.1.aarch64.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/zeromq-devel-4.0.4-2.1.aarch64.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libzmq-debuginfo-4.0.4-2.1.aarch64.rpm [ 54s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ZYyFCw [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd zeromq-4.0.4 [ 54s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/zeromq-4.0.4-2.1.aarch64 [ 54s] + exit 0 [ 54s] ... checking for files with abuild user/group [ 54s] ... creating baselibs [ 54s] ... comparing built packages with the former built [ 54s] /usr/lib/build/pkg-diff.sh [ 54s] different number of subpackages [ 54s] /.build.oldpackages/libzmq-4.0.4-2.1.aarch64.rpm [ 54s] /.build.oldpackages/zeromq-debugsource-4.0.4-1.2.aarch64.rpm [ 54s] /.build.oldpackages/zeromq-4.0.4-2.1.src.rpm [ 54s] /.build.oldpackages/zeromq-debugsource-4.0.4-2.1.aarch64.rpm [ 54s] /.build.oldpackages/zeromq-devel-4.0.4-2.1.aarch64.rpm [ 54s] /.build.oldpackages/libzmq-debuginfo-4.0.4-1.2.aarch64.rpm [ 54s] /.build.oldpackages/libzmq-debuginfo-4.0.4-2.1.aarch64.rpm [ 54s] /.build.oldpackages/libzmq-4.0.4-1.2.aarch64.rpm [ 54s] /.build.oldpackages/zeromq-devel-4.0.4-1.2.aarch64.rpm [ 54s] /home/abuild/rpmbuild/RPMS/aarch64/libzmq-4.0.4-2.1.aarch64.rpm [ 54s] /home/abuild/rpmbuild/RPMS/aarch64/zeromq-debugsource-4.0.4-2.1.aarch64.rpm [ 54s] /home/abuild/rpmbuild/RPMS/aarch64/zeromq-devel-4.0.4-2.1.aarch64.rpm [ 54s] /home/abuild/rpmbuild/RPMS/aarch64/libzmq-debuginfo-4.0.4-2.1.aarch64.rpm [ 54s] /home/abuild/rpmbuild/SRPMS/zeromq-4.0.4-2.1.src.rpm [ 54s] [ 54s] obsnw07 finished "build zeromq.spec" at Sun Apr 23 01:03:06 UTC 2017. [ 54s]