[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw03 started "build _service:gbs:dracut.spec" at Sun Apr 23 02:01:23 UTC 2017. [ 0s] [ 0s] Building dracut for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'bdf4bc6c191a364c6a609eb310c8d80f' [ 0s] [ 0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/3/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 8s] [31/40] preinstalling bzip2... [ 8s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/118] installing libmagic-data-5.28-3.14 [ 9s] [2/118] installing setup-0.9-3.17 [ 9s] [3/118] installing terminfo-base-5.9-3.19 [ 9s] [4/118] installing filesystem-3.1-3.2 [ 9s] [5/118] installing glibc-2.24-3.8 [ 9s] [6/118] installing libatomic-6.2.1-3.2 [ 9s] [7/118] installing libgcc-6.2.1-3.2 [ 9s] [8/118] installing bash-3.2.57-4.1 [ 9s] [9/118] installing binutils-2.27-4.13 [ 9s] [10/118] installing cpio-2.11-3.3 [ 9s] [11/118] installing diffutils-3.3-3.1 [ 9s] [12/118] installing findutils-4.3.8-3.24 [ 10s] [13/118] installing hostname-3.12-4.1 [ 10s] [14/118] installing libattr-2.4.47-3.21 [ 10s] [15/118] installing libbz2-1.0.6-4.20 [ 10s] [16/118] installing libcap-2.24-3.18 [ 10s] [17/118] installing libcares-1.10.0-3.1 [ 10s] [18/118] installing libelf-0.153-3.7 [ 10s] [19/118] installing libexpat-2.2.0-3.23 [ 10s] [20/118] installing libext2fs-1.42.13-3.3 [ 10s] [21/118] installing libfreebl3-3.23-3.19 [ 10s] [22/118] installing libgomp-6.2.1-3.2 [ 10s] [23/118] installing libgpg-error-1.13-4.34 [ 10s] [24/118] installing libitm-6.2.1-3.2 [ 10s] [25/118] installing libltdl-2.4.2-4.20 [ 10s] [26/118] installing liblua-5.1.4-3.2 [ 10s] [27/118] installing liblzma-5.2.2-3.20 [ 10s] [28/118] installing libpcre-8.39-3.3 [ 10s] [29/118] installing libpopt-1.16-4.3 [ 10s] [30/118] installing libpython-2.7.8-3.22 [ 11s] [31/118] installing libsmack-1.3.0-3.19 [ 11s] [32/118] installing libsmartcols-2.28-3.1 [ 11s] [33/118] installing libsqlite-3.8.10.2-3.3 [ 11s] [34/118] installing libstdc++-6.2.1-3.2 [ 11s] [35/118] installing libuuid-2.28-3.1 [ 11s] [36/118] installing m4-1.4.17-3.1 [ 11s] [37/118] installing net-tools-2.0_20121208git-3.1 [ 11s] [38/118] installing nghttp2-1.20.0-3.3 [ 11s] [39/118] installing nspr-4.12-3.3 [ 11s] [40/118] installing patch-2.7-3.3 [ 11s] [41/118] installing pkg-config-0.28-4.22 [ 11s] [42/118] installing sed-4.1c-3.1 [ 11s] [43/118] installing update-alternatives-1.18.15-3.1 [ 11s] [44/118] installing which-2.20-6.1 [ 11s] [45/118] installing zlib-1.2.8-3.24 [ 11s] [46/118] installing libncurses-5.9-3.19 [ 11s] [47/118] installing shadow-utils-4.1.4.2-3.2 [ 11s] [48/118] installing build-compare-2015.04.28-3.13 [ 11s] [49/118] installing libstdc++-devel-6.2.1-3.2 [ 12s] [50/118] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 13s] [51/118] installing cpp-6.2.1-3.2 [ 13s] [52/118] installing gcc-c++-6.2.1-3.2 [ 14s] [53/118] installing coreutils-6.9-3.1 [ 14s] [54/118] installing dash-0.5.7-4.1 [ 14s] [55/118] installing db4-4.8.30.NC-3.26 [ 14s] [56/118] installing gawk-3.1.5-3.1 [ 14s] [57/118] installing grep-2.5.2-3.1 [ 14s] [58/118] installing less-466-8.1 [ 14s] [59/118] installing libacl-2.2.52-3.25 [ 15s] [60/118] installing libasm-0.153-3.7 [ 15s] [61/118] installing libblkid-2.28-3.1 [ 15s] [62/118] installing libcc1-6.2.1-3.2 [ 15s] [63/118] installing libgcrypt-1.7.1-3.7 [ 15s] [64/118] installing libopenssl-1.0.2j-3.19 [ 15s] [65/118] installing libreadline-5.2-3.18 [ 15s] [66/118] installing libubsan-6.2.1-3.2 [ 15s] [67/118] installing make-4.0-3.2 [ 15s] [68/118] installing nss-certs-3.23-3.19 [ 15s] [69/118] installing procps-ng-3.3.9-3.2 [ 15s] [70/118] installing smack-1.3.0-3.19 [ 15s] [71/118] installing bzip2-1.0.6-4.20 [ 15s] [72/118] installing libmagic-5.28-3.14 [ 15s] [73/118] installing libxml2-2.9.4-4.18 [ 15s] [74/118] installing xz-5.2.2-3.20 [ 16s] [75/118] installing libdw-0.153-3.7 [ 16s] [76/118] installing linux-glibc-devel-3.10-3.24 [ 16s] [77/118] installing file-5.28-3.14 [ 16s] [78/118] installing glibc-locale-2.24-3.8 [ 16s] [79/118] installing libmount-2.28-3.1 [ 16s] [80/118] installing tar-1.17-3.1 [ 16s] [81/118] installing gzip-1.3.12-3.18 [ 16s] [82/118] installing libfdisk1-2.28-3.1 [ 16s] [83/118] installing libxml2-tools-2.9.4-4.18 [ 16s] [84/118] installing pam-1.1.6-3.2 [ 17s] [85/118] installing perl-5.20.0-3.89 [ 18s] [86/118] installing rsync-3.1.1-1.3 [ 18s] [87/118] installing tzdata-2016i-4.1 [ 18s] [88/118] installing libcurl-7.53.1-1.1 [ 18s] [89/118] installing elfutils-0.153-3.7 [ 19s] [90/118] installing libxslt-1.1.29-3.1 [ 19s] [91/118] installing gcc-6.2.1-3.2 [ 19s] [92/118] installing python-2.7.8-3.22 [ 20s] [93/118] installing build-mkbaselibs-20120927-3.1 [ 20s] [94/118] installing perl-Error-0.17017-2.1 [ 20s] [95/118] installing glibc-devel-2.24-3.8 [ 20s] [96/118] installing qemu-accel-x86_64-armv7l-0.4-3.12 [ 26s] warning: %post(qemu-accel-x86_64-armv7l-0.4-3.12.armv7l) scriptlet failed, exit status 1 [ 26s] [97/118] installing autoconf-2.69-3.27 [ 26s] [98/118] installing libxslt-tools-1.1.29-3.1 [ 26s] [99/118] installing pam-modules-extra-1.1.6-3.2 [ 26s] [100/118] installing python-xml-2.7.8-3.22 [ 26s] [101/118] installing sgml-skel-0.6-3.1 [ 26s] [102/118] installing util-linux-2.28-3.1 [ 26s] [103/118] installing iso_ent-2000.11.03-2.1 [ 26s] [104/118] installing automake-1.14.1-3.17 [ 26s] [105/118] installing util-linux-su-2.28-3.1 [ 26s] [106/118] installing build-20120927-3.1 [ 26s] [107/118] installing xmlcharent-0.3-2.1 [ 27s] [108/118] installing openssh-6.6p1-3.1 [ 27s] Usage: groupadd [options] GROUP [ 27s] [ 27s] Options: [ 27s] -f, --force exit successfully if the group already exists, [ 27s] and cancel -g if the GID is already used [ 27s] -g, --gid GID use GID for the new group [ 27s] -h, --help display this help message and exit [ 27s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 27s] -o, --non-unique allow to create groups with duplicate [ 27s] (non-unique) GID [ 27s] -p, --password PASSWORD use this encrypted password for the new group [ 27s] -r, --system create a system account [ 27s] [ 27s] [109/118] installing libtool-2.4.2-4.20 [ 27s] [110/118] installing docbook_4-4.5-2.1 [ 27s] [111/118] installing git-core-2.0.1-1.9 [ 28s] [112/118] installing git-2.0.1-1.9 [ 28s] [113/118] installing docbook-xsl-stylesheets-1.78.1-2.1 [ 28s] [114/118] installing asciidoc-8.6.6-2.1 [ 28s] [115/118] installing nss-3.23-3.19 [ 28s] [116/118] installing libsoftokn3-3.23-3.19 [ 28s] [117/118] installing rpm-4.11.0.1-3.20 [ 29s] [118/118] installing rpm-build-4.11.0.1-3.20 [ 29s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 29s] now finalizing build dir... [ 29s] build target is armv7l-tizen-linux [ 29s] ----------------------------------------------------------------- [ 29s] I have the following modifications for dracut.spec: [ 29s] 9c9 [ 29s] < Release: 0 [ 29s] --- [ 29s] > Release: 3.1 [ 29s] 256a257 [ 29s] > %changelog [ 29s] ----------------------------------------------------------------- [ 29s] ----- building dracut.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 29s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/bdf4bc6c191a364c6a609eb310c8d80f-dracut' -ba /home/abuild/rpmbuild/SOURCES/dracut.spec [ 29s] Building target platforms: armv7l-tizen-linux [ 29s] Building for target armv7l-tizen-linux [ 29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.aIxVFj [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + rm -rf dracut-032 [ 29s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 29s] + /bin/tar -xf - [ 29s] + STATUS=0 [ 29s] + '[' 0 -ne 0 ']' [ 29s] + cd dracut-032 [ 29s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 30s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 30s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file Makefile [ 30s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 30s] + exit 0 [ 30s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.DDRuKl [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd dracut-032 [ 30s] ++ uname -m [ 30s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 30s] + export CFLAGS [ 30s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 30s] + export CXXFLAGS [ 30s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 30s] + export FFLAGS [ 30s] + LDFLAGS= [ 30s] + export LDFLAGS [ 30s] + LD_AS_NEEDED=1 [ 30s] + export LD_AS_NEEDED [ 30s] + make all [ 30s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 30s] install/dracut-install.c: In function 'resolve_deps': [ 30s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 30s] read(fd, buf, LINE_MAX); [ 30s] ^~~~~~~~~~~~~~~~~~~~~~~ [ 30s] install/dracut-install.c: In function 'cp': [ 30s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 30s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 30s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 30s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 30s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 30s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 30s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 30s] ln -fs install/dracut-install dracut-install [ 30s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 35s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 36s] Note: Writing lsinitrd.1 [ 36s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 44s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 44s] Note: Writing dracut.conf.5 [ 44s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 69s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 69s] Note: Writing dracut.cmdline.7 [ 69s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 73s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 73s] Note: Writing dracut.bootup.7 [ 73s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 91s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 91s] Note: Writing dracut.8 [ 91s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 96s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 96s] Note: Writing dracut-catimages.8 [ 96s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 101s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 102s] Note: Writing mkinitrd.8 [ 102s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 106s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 106s] Note: Writing dracut-cmdline.service.8 [ 106s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 111s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 111s] Note: Writing dracut-initqueue.service.8 [ 111s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 117s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 117s] Note: Writing dracut-mount.service.8 [ 117s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 122s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 122s] Note: Writing dracut-shutdown.service.8 [ 123s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 127s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 127s] Note: Writing dracut-pre-mount.service.8 [ 127s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 131s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 131s] Note: Writing dracut-pre-pivot.service.8 [ 131s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 136s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 136s] Note: Writing dracut-pre-trigger.service.8 [ 136s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 140s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 140s] Note: Writing dracut-pre-udev.service.8 [ 140s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 210s] xsltproc -o dracut.html --xinclude -nonet \ [ 210s] --stringparam html.stylesheet \ [ 210s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 210s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 210s] rm -f -- dracut.xml [ 210s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 210s] + exit 0 [ 210s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.39wbtB [ 210s] + umask 022 [ 210s] + cd /home/abuild/rpmbuild/BUILD [ 210s] + cd dracut-032 [ 210s] + LANG=C [ 210s] + export LANG [ 210s] + unset DISPLAY [ 210s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm [ 210s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm [ 210s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 210s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut [ 210s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/bin [ 210s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/etc [ 210s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/modules.d [ 210s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man8 [ 210s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/bin/dracut [ 210s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/bin/dracut-catimages [ 210s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/bin/mkinitrd [ 210s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/bin/lsinitrd [ 210s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/etc/dracut.conf [ 210s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/etc/dracut.conf.d [ 210s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut.conf.d [ 210s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut-functions.sh [ 210s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut-version.sh [ 210s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut-functions [ 210s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut-logger.sh [ 210s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut-initramfs-restore [ 210s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut [ 210s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man1/${i##*/}; done [ 210s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man5/${i##*/}; done [ 210s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man7/${i##*/}; done [ 210s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man8/${i##*/}; done [ 211s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/man/man7/dracut.kernel.7 [ 211s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 211s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/systemd/system; \ [ 211s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 211s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/systemd/system/shutdown.target.wants; \ [ 211s] ln -s ../dracut-shutdown.service \ [ 211s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 211s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/systemd/system/initrd.target.wants; \ [ 211s] for i in \ [ 211s] dracut-cmdline.service \ [ 211s] dracut-initqueue.service \ [ 211s] dracut-mount.service \ [ 211s] dracut-pre-mount.service \ [ 211s] dracut-pre-pivot.service \ [ 211s] dracut-pre-trigger.service \ [ 211s] dracut-pre-udev.service \ [ 211s] ; do \ [ 211s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 211s] ln -s ../$i \ [ 211s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 211s] done \ [ 211s] fi [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 211s] if [ -f install/dracut-install ]; then \ [ 211s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut-install; \ [ 211s] fi [ 211s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/kernel/install.d [ 211s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/kernel/install.d/50-dracut.install [ 211s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/kernel/install.d/51-dracut-rescue.install [ 211s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/bash-completion/completions [ 211s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/bash-completion/completions/dracut [ 211s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/bash-completion/completions/lsinitrd [ 211s] + echo DRACUT_VERSION=032-3.1 [ 211s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm//usr/lib/dracut/modules.d/01fips [ 211s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm//usr/lib/dracut/modules.d/02fips-aesni [ 211s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm//usr/lib/dracut/modules.d/50gensplash [ 211s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm//usr/lib/dracut/modules.d/96securityfs [ 211s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm//usr/lib/dracut/modules.d/97masterkey [ 211s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm//usr/lib/dracut/modules.d/98integrity [ 211s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm//usr/lib/dracut/modules.d/98selinux [ 211s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/boot/dracut [ 211s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/var/lib/dracut/overlay [ 211s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/var/log [ 211s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/var/log/dracut.log [ 211s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/com/initramfs [ 211s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/etc/dracut.conf.d/01-dist.conf [ 211s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/etc/logrotate.d [ 211s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/etc/logrotate.d/dracut_log [ 211s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 212s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/lib/dracut/dracut-install [ 217s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 217s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 217s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 217s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 217s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 217s] 195 blocks [ 217s] + /usr/lib/rpm/check-buildroot [ 217s] + /usr/lib/rpm//brp-compress [ 217s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 218s] + /usr/lib/rpm/brp-python-hardlink [ 218s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm [ 218s] Processing files: dracut-032-3.1.armv7l [ 218s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 218s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 218s] [ 218s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.KGnLaf [ 218s] + umask 022 [ 218s] + cd /home/abuild/rpmbuild/BUILD [ 218s] + cd dracut-032 [ 218s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/licenses/dracut [ 218s] + export LICENSEDIR [ 218s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/licenses/dracut [ 218s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm/usr/share/licenses/dracut [ 218s] + exit 0 [ 218s] Provides: config(dracut) = 032-3.1 dracut = 032-3.1 dracut(armv7l-32) = 032-3.1 [ 218s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 218s] Requires: /bin/bash /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.5) [ 218s] Conflicts: systemd < 187 [ 218s] Processing files: dracut-debugsource-032-3.1.armv7l [ 218s] Provides: dracut-debugsource = 032-3.1 dracut-debugsource(armv7l-32) = 032-3.1 [ 218s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 218s] Processing files: dracut-network-032-3.1.armv7l [ 218s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 218s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 218s] [ 219s] Provides: dracut-network = 032-3.1 dracut-network(armv7l-32) = 032-3.1 [ 219s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 219s] Requires: /bin/bash /bin/sh [ 219s] Processing files: dracut-caps-032-3.1.armv7l [ 219s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 219s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 219s] [ 219s] Provides: dracut-caps = 032-3.1 dracut-caps(armv7l-32) = 032-3.1 [ 219s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 219s] Requires: /bin/bash [ 219s] Processing files: dracut-tools-032-3.1.armv7l [ 219s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 219s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 219s] [ 219s] Provides: dracut-tools = 032-3.1 dracut-tools(armv7l-32) = 032-3.1 [ 219s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 219s] Requires: /bin/bash [ 219s] Processing files: dracut-debuginfo-032-3.1.armv7l [ 219s] Provides: dracut-debuginfo = 032-3.1 dracut-debuginfo(armv7l-32) = 032-3.1 [ 219s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 219s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm [ 219s] warning: Could not canonicalize hostname: obspw03 [ 219s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-3.1.src.rpm [ 219s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-032-3.1.armv7l.rpm [ 219s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-debugsource-032-3.1.armv7l.rpm [ 219s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-network-032-3.1.armv7l.rpm [ 219s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-caps-032-3.1.armv7l.rpm [ 219s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-tools-032-3.1.armv7l.rpm [ 219s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-debuginfo-032-3.1.armv7l.rpm [ 219s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Pdb7VO [ 219s] + umask 022 [ 219s] + cd /home/abuild/rpmbuild/BUILD [ 219s] + cd dracut-032 [ 219s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.1.arm [ 219s] + exit 0 [ 219s] ... checking for files with abuild user/group [ 219s] ... creating baselibs [ 220s] ... comparing built packages with the former built [ 220s] /usr/lib/build/pkg-diff.sh [ 220s] different number of subpackages [ 220s] /.build.oldpackages/dracut-debugsource-032-3.1.armv7l.rpm [ 220s] /.build.oldpackages/dracut-debuginfo-032-3.1.armv7l.rpm [ 220s] /.build.oldpackages/dracut-tools-032-1.9.armv7l.rpm [ 220s] /.build.oldpackages/dracut-032-3.1.armv7l.rpm [ 220s] /.build.oldpackages/dracut-debugsource-032-1.9.armv7l.rpm [ 220s] /.build.oldpackages/dracut-caps-032-3.1.armv7l.rpm [ 220s] /.build.oldpackages/dracut-tools-032-3.1.armv7l.rpm [ 220s] /.build.oldpackages/dracut-network-032-1.9.armv7l.rpm [ 220s] /.build.oldpackages/dracut-032-1.9.armv7l.rpm [ 220s] /.build.oldpackages/dracut-caps-032-1.9.armv7l.rpm [ 220s] /.build.oldpackages/dracut-032-3.1.src.rpm [ 220s] /.build.oldpackages/dracut-network-032-3.1.armv7l.rpm [ 220s] /.build.oldpackages/dracut-debuginfo-032-1.9.armv7l.rpm [ 220s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-debugsource-032-3.1.armv7l.rpm [ 220s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-debuginfo-032-3.1.armv7l.rpm [ 220s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-032-3.1.armv7l.rpm [ 220s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-caps-032-3.1.armv7l.rpm [ 220s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-tools-032-3.1.armv7l.rpm [ 220s] /home/abuild/rpmbuild/RPMS/armv7l/dracut-network-032-3.1.armv7l.rpm [ 220s] /home/abuild/rpmbuild/SRPMS/dracut-032-3.1.src.rpm [ 220s] [ 220s] obspw03 finished "build dracut.spec" at Sun Apr 23 02:05:03 UTC 2017. [ 220s]