[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obspw09 started "build _service:gbs:ise-engine-hangul.spec" at Sun Apr 23 03:04:49 UTC 2017. [ 1s] [ 1s] Building ise-engine-hangul for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '5e11186c3443da83b37189f0d1952861' [ 1s] [ 1s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:ise-engine-hangul.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:ise-engine-hangul.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:ise-engine-hangul.spec build rpmlint-Factory ... [ 2s] copying qemu [ 3s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 3s] [ 3s] registering binfmt handlers for cross build [ 3s] interpreter for 'aarch64' is -1 [ 3s] write: Invalid argument [ 3s] /proc/sys/fs/binfmt_misc/register: write failed [ 3s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 3s] [ 3s] /.build/qemu-reg: No such file or directory [ 3s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 3s] /usr/lib/build/qemu-reg: No such file or directory [ 3s] /usr/lib/build/qemu-reg: binfmt registration failed [ 7s] cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] [1/40] preinstalling libmagic-data... [ 7s] [2/40] preinstalling setup... [ 7s] [3/40] preinstalling filesystem... [ 7s] [4/40] preinstalling glibc... [ 8s] [5/40] preinstalling libgcc... [ 8s] [6/40] preinstalling bash... [ 8s] [7/40] preinstalling diffutils... [ 8s] [8/40] preinstalling grep... [ 8s] [9/40] preinstalling libattr... [ 8s] [10/40] preinstalling libbz2... [ 8s] [11/40] preinstalling libcap... [ 8s] [12/40] preinstalling libelf... [ 9s] [13/40] preinstalling libfreebl3... [ 9s] [14/40] preinstalling liblua... [ 9s] [15/40] preinstalling liblzma... [ 9s] [16/40] preinstalling libncurses... [ 9s] [17/40] preinstalling libpopt... [ 9s] [18/40] preinstalling libsmack... [ 9s] [19/40] preinstalling libsqlite... [ 9s] [20/40] preinstalling libuuid... [ 9s] [21/40] preinstalling nspr... [ 9s] [22/40] preinstalling sed... [ 9s] [23/40] preinstalling zlib... [ 9s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 17s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 19s] [26/40] preinstalling coreutils... [ 19s] [27/40] preinstalling libacl... [ 19s] [28/40] preinstalling libblkid... [ 19s] [29/40] preinstalling libreadline... [ 19s] [30/40] preinstalling smack... [ 19s] [31/40] preinstalling bzip2... [ 19s] [32/40] preinstalling libmagic... [ 19s] [33/40] preinstalling libxml2... [ 20s] [34/40] preinstalling libmount... [ 20s] [35/40] preinstalling tar... [ 20s] [36/40] preinstalling util-linux... [ 20s] [37/40] preinstalling util-linux-su... [ 20s] [38/40] preinstalling nss... [ 20s] [39/40] preinstalling libsoftokn3... [ 20s] [40/40] preinstalling rpm... [ 21s] [ 21s] running qemu-linux-user-x86_64-cross postinstall script [ 21s] running qemu-accel-x86_64-armv7l postinstall script [ 21s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 21s] running setup postinstall script [ 21s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 21s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 21s] initializing rpm db... [ 22s] reordering...cycle: gio-branding-upstream -> libgio [ 22s] breaking dependency libgio -> gio-branding-upstream [ 22s] cycle: vconf-compat -> buxton2 [ 22s] breaking dependency buxton2 -> vconf-compat [ 22s] cycle: efl -> eina [ 22s] breaking dependency efl -> eina [ 22s] cycle: efl -> eo [ 22s] breaking dependency eo -> efl [ 22s] cycle: efl -> eo -> eina [ 22s] breaking dependency eo -> eina [ 22s] cycle: ecore-core -> eldbus [ 22s] breaking dependency ecore-core -> eldbus [ 22s] cycle: ecore-evas -> ecore-input-evas -> evas [ 22s] breaking dependency ecore-evas -> ecore-input-evas [ 22s] cycle: ecore-evas -> evas [ 22s] breaking dependency ecore-evas -> evas [ 22s] cycle: isf -> org.tizen.isf-kbd-mode-changer [ 22s] breaking dependency isf -> org.tizen.isf-kbd-mode-changer [ 22s] cycle: bluetooth-tools-no-firmware -> bluetooth-tools [ 22s] breaking dependency bluetooth-tools-no-firmware -> bluetooth-tools [ 22s] cycle: libalarm -> alarm-server [ 22s] breaking dependency alarm-server -> libalarm [ 22s] cycle: libdpm-minimal -> device-policy-manager [ 22s] breaking dependency device-policy-manager -> libdpm-minimal [ 22s] cycle: libsoftokn3 -> nss [ 22s] breaking dependency nss -> libsoftokn3 [ 22s] done [ 28s] [1/258] installing default-ac-domains-0.1-2.2 [ 28s] [2/258] installing libmagic-data-5.28-3.14 [ 28s] [3/258] installing setup-0.9-3.17 [ 28s] [4/258] installing terminfo-base-5.9-3.19 [ 28s] [5/258] installing filesystem-3.1-3.2 [ 28s] [6/258] installing glibc-2.24-3.8 [ 29s] [7/258] installing libatomic-6.2.1-3.2 [ 29s] [8/258] installing libgcc-6.2.1-3.2 [ 29s] [9/258] installing bash-3.2.57-4.1 [ 30s] [10/258] installing binutils-2.27-4.13 [ 30s] [11/258] installing capi-base-common-0.4.12-2.1 [ 31s] [12/258] installing cpio-2.11-3.3 [ 31s] [13/258] installing diffutils-3.3-3.1 [ 31s] [14/258] installing findutils-4.3.8-3.24 [ 31s] [15/258] installing fribidi-0.19.7-3.1 [ 31s] [16/258] installing gdbm-1.8.3-3.3 [ 31s] [17/258] installing giflib-5.1.2-3.1 [ 32s] [18/258] installing hostname-3.12-4.1 [ 32s] [19/258] installing iniparser-3.1-1.3 [ 32s] [20/258] installing libattr-2.4.47-3.21 [ 32s] [21/258] installing libbz2-1.0.6-4.20 [ 33s] [22/258] installing libcap-2.24-3.18 [ 33s] [23/258] installing libdrm-2.4.75-1.2 [ 33s] [24/258] installing libelf-0.153-3.7 [ 33s] [25/258] installing libelf0-0.8.13-3.1 [ 33s] [26/258] installing libevdev-1.2.2-2.3 [ 34s] [27/258] installing libexpat-2.2.0-3.23 [ 34s] [28/258] installing libext2fs-1.42.13-3.3 [ 34s] [29/258] installing libffi-3.1-3.1 [ 34s] [30/258] installing libfreebl3-3.23-3.19 [ 35s] [31/258] installing libgomp-6.2.1-3.2 [ 35s] [32/258] installing libhyphen-2.8.8-2.1 [ 35s] [33/258] installing libitm-6.2.1-3.2 [ 35s] [34/258] installing libjpeg-8.0.2-1.2 [ 36s] [35/258] installing libjson-0.12-2.2 [ 36s] [36/258] installing libltdl-2.4.2-4.20 [ 36s] [37/258] installing liblua-5.1.4-3.2 [ 36s] [38/258] installing liblzma-5.2.2-3.20 [ 36s] [39/258] installing libmtdev-1.1.5-2.3 [ 37s] [40/258] installing libogg-1.3.2-1.3 [ 37s] [41/258] installing libpcre-8.39-3.3 [ 37s] [42/258] installing libpopt-1.16-4.3 [ 37s] [43/258] installing libpython-2.7.8-3.22 [ 38s] [44/258] installing libsmack-1.3.0-3.19 [ 38s] [45/258] installing libsmartcols-2.28-3.1 [ 38s] [46/258] installing libsqlite-3.8.10.2-3.3 [ 38s] [47/258] installing libstdc++-6.2.1-3.2 [ 39s] [48/258] installing libuuid-2.28-3.1 [ 39s] [49/258] installing libwayland-egl-1.0-2.2 [ 39s] [50/258] installing libxkbcommon-0.4.3-2.3 [ 39s] [51/258] installing m4-1.4.17-3.1 [ 39s] [52/258] installing net-tools-2.0_20121208git-3.1 [ 40s] [53/258] installing nspr-4.12-3.3 [ 40s] [54/258] installing patch-2.7-3.3 [ 40s] [55/258] installing pixman-0.32.6-2.1 [ 40s] [56/258] installing pkg-config-0.28-4.22 [ 40s] [57/258] installing rfkill-0.4-1.3 [ 41s] [58/258] installing sed-4.1c-3.1 [ 41s] [59/258] installing update-alternatives-1.18.15-3.1 [ 41s] [60/258] installing which-2.20-6.1 [ 41s] [61/258] installing xdgmime-0.0.12-2.1 [ 41s] [62/258] installing zlib-1.2.8-3.24 [ 41s] [63/258] installing libncurses-5.9-3.19 [ 42s] [64/258] installing shadow-utils-4.1.4.2-3.2 [ 42s] [65/258] installing bluetooth-tools-profile_common-0.2.37-2.2 [ 42s] /usr/etc/bluetooth / [ 42s] / [ 42s] [66/258] installing build-compare-2015.04.28-3.13 [ 42s] [67/258] installing libstdc++-devel-6.2.1-3.2 [ 43s] [68/258] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 46s] [69/258] installing cpp-6.2.1-3.2 [ 47s] [70/258] installing gcc-c++-6.2.1-3.2 [ 48s] [71/258] installing pkgmgr-0.6.0-2.1 [ 48s] /var/tmp/rpm-tmp.myo5Cr: line 9: /etc/tizen-platform.conf: No such file or directory [ 48s] warning: %post(pkgmgr-0.6.0-2.1.armv7l) scriptlet failed, exit status 1 [ 48s] [72/258] installing sensord-dummy-2.0.11-2.2 [ 49s] [73/258] installing coreutils-6.9-3.1 [ 49s] [74/258] installing db4-4.8.30.NC-3.26 [ 49s] [75/258] installing gawk-3.1.5-3.1 [ 49s] [76/258] installing grep-2.5.2-3.1 [ 50s] [77/258] installing jsoncpp-1.7.7-1.2 [ 50s] [78/258] installing less-466-8.1 [ 50s] [79/258] installing libacl-2.2.52-3.25 [ 50s] [80/258] installing libasm-0.153-3.7 [ 50s] [81/258] installing libblkid-2.28-3.1 [ 51s] [82/258] installing libcap-tools-2.24-3.18 [ 51s] [83/258] installing libcc1-6.2.1-3.2 [ 51s] [84/258] installing libglib-2.44.1-1.2 [ 51s] [85/258] installing libhangul-0.1.0-2.1 [ 52s] [86/258] installing libopenssl-1.0.2j-3.19 [ 52s] [87/258] installing libpcreposix-8.39-3.3 [ 53s] [88/258] installing libpng-1.6.21-2.3 [ 53s] [89/258] installing libreadline-5.2-3.18 [ 53s] [90/258] installing libubsan-6.2.1-3.2 [ 53s] [91/258] installing libvorbis-1.3.4-2.1 [ 54s] [92/258] installing make-4.0-3.2 [ 54s] [93/258] installing minizip-1.2.8-3.24 [ 54s] [94/258] installing nss-certs-3.23-3.19 [ 54s] [95/258] installing procps-ng-3.3.9-3.2 [ 55s] [96/258] installing psmisc-22.21-2.1 [ 55s] [97/258] installing smack-1.3.0-3.19 [ 55s] [98/258] installing bzip2-1.0.6-4.20 [ 55s] [99/258] installing gettext-runtime-0.19.7-3.7 [ 55s] [100/258] installing libicu-57.1-2.3 [ 57s] [101/258] installing libkmod-24-2.1 [ 57s] [102/258] installing libmagic-5.28-3.14 [ 58s] [103/258] installing libpcrecpp-8.39-3.3 [ 58s] [104/258] installing libxml2-2.9.4-4.18 [ 58s] [105/258] installing xz-5.2.2-3.20 [ 58s] [106/258] installing cynara-db-migration-0.14.10-2.4 [ 58s] [107/258] installing ttrace-1.0.3-1.3 [ 59s] [108/258] installing libdw-0.153-3.7 [ 59s] [109/258] installing libtiff-4.0.6-2.3 [ 59s] [110/258] installing libhangul-devel-0.1.0-2.1 [ 59s] [111/258] installing linux-glibc-devel-3.10-3.24 [ 60s] [112/258] installing file-5.28-3.14 [ 60s] [113/258] installing glibc-locale-2.24-3.8 [ 61s] [114/258] installing libgmodule-2.44.1-1.2 [ 61s] [115/258] installing libgthread-2.44.1-1.2 [ 61s] [116/258] installing libmount-2.28-3.1 [ 62s] [117/258] installing security-config-1.0-2.1 [ 80s] usermod: user 'buxton' does not exist [ 80s] usermod: user 'dbus' does not exist [ 80s] [118/258] installing tar-1.17-3.1 [ 80s] [119/258] installing tizen-platform-config-4.0-1.2 [ 83s] [120/258] installing gzip-1.3.12-3.18 [ 83s] [121/258] installing libfdisk1-2.28-3.1 [ 84s] [122/258] installing libfreetype-2.6.5-2.1 [ 84s] [123/258] installing libgobject-2.44.1-1.2 [ 84s] [124/258] installing libsndfile-1.0.26-2.3 [ 84s] [125/258] installing pam-1.1.6-3.2 [ 85s] [126/258] installing perl-5.20.0-3.89 [ 87s] [127/258] installing tzdata-2016i-4.1 [ 87s] [128/258] installing pcre-devel-8.39-3.3 [ 88s] [129/258] installing elfutils-0.153-3.7 [ 88s] [130/258] installing libcynara-commons-0.14.10-2.4 [ 89s] [131/258] installing gcc-6.2.1-3.2 [ 90s] [132/258] installing shared-mime-info-1.3-2.1 [ 108s] [133/258] installing python-2.7.8-3.22 [ 109s] [134/258] installing build-mkbaselibs-20120927-3.1 [ 109s] [135/258] installing glibc-devel-2.24-3.8 [ 110s] [136/258] installing qemu-accel-x86_64-armv7l-0.4-3.12 [ 119s] warning: %post(qemu-accel-x86_64-armv7l-0.4-3.12.armv7l) scriptlet failed, exit status 1 [ 120s] [137/258] installing autoconf-2.69-3.27 [ 120s] [138/258] installing libtzplatform-config-4.0-1.2 [ 120s] [139/258] installing libcynara-client-0.14.10-2.4 [ 120s] [140/258] installing libcynara-creds-commons-0.14.10-2.4 [ 121s] [141/258] installing libcynara-session-0.14.10-2.4 [ 121s] [142/258] installing python-xml-2.7.8-3.22 [ 121s] [143/258] installing gettext-tools-0.19.7-3.7 [ 122s] [144/258] installing libharfbuzz-1.3.0-2.1 [ 122s] [145/258] installing libsystemd-231-2.2 [ 123s] [146/258] installing fontconfig-2.12.1-2.1 [ 123s] [147/258] installing util-linux-2.28-3.1 [ 124s] [148/258] installing systemd-231-2.2 [ 126s] [149/258] installing tizen-platform-config-tools-4.0-1.2 [ 126s] [150/258] installing automake-1.14.1-3.17 [ 126s] [151/258] installing dbus-libs-1.10.6-2.2 [ 127s] [152/258] installing util-linux-su-2.28-3.1 [ 127s] [153/258] installing build-20120927-3.1 [ 127s] [154/258] installing libdlog-0.6-1.2 [ 127s] [155/258] installing libinput-0.11.0-2.3 [ 127s] [156/258] installing libmm-session-0.2.10-2.1 [ 128s] [157/258] installing libtracker-1.0.1-1.3 [ 128s] [158/258] installing coregl-0.1.10-3.8 [ 128s] [159/258] installing libtool-2.4.2-4.20 [ 129s] [160/258] installing libwayland-client-1.12.0-2.2 [ 129s] [161/258] installing libwayland-server-1.12.0-2.2 [ 129s] [162/258] installing libslp-db-util-0.1.1-2.1 [ 130s] [163/258] installing libpulse-5.0-1.2 [ 130s] [164/258] installing auth-fw-0.0.1-2.3 [ 130s] Running in chroot, ignoring request. [ 130s] Running in chroot, ignoring request. [ 130s] [165/258] installing capi-system-info-0.2.0-1.2 [ 131s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 131s] iniparser: cannot open /etc/info.ini [ 131s] [166/258] installing libwayland-extension-client-1.1.15-2.1 [ 131s] [167/258] installing libwayland-cursor-1.12.0-2.2 [ 131s] [168/258] installing libauth-fw-client-admin-0.0.1-2.3 [ 132s] [169/258] installing libtbm-2.0.16-2.3 [ 132s] [170/258] installing libwayland-tbm-client-0.1.19-2.2 [ 132s] [171/258] installing libwayland-tbm-server-0.1.19-2.2 [ 133s] [172/258] installing libtdm-1.6.15-1.1 [ 133s] [173/258] installing libgbm-1.0-2.1 [ 134s] [174/258] installing libtdm-client-1.6.15-1.1 [ 134s] [175/258] installing bluetooth-tools-no-firmware-0.2.37-2.2 [ 134s] [176/258] installing eo-1.16.0-2.4 [ 134s] [177/258] installing nss-3.23-3.19 [ 134s] [178/258] installing libgio-2.44.1-1.2 [ 135s] [179/258] installing gio-branding-upstream-2.44.1-1.2 [ 135s] [180/258] installing bluetooth-tools-0.2.37-2.2 [ 135s] [181/258] installing efl-1.16.0-2.4 [ 135s] [182/258] installing libjson-glib-1.2.0-2.1 [ 136s] [183/258] installing libcynara-creds-gdbus-0.14.10-2.4 [ 136s] [184/258] installing libsoftokn3-3.23-3.19 [ 136s] [185/258] installing glib2-tools-2.44.1-1.2 [ 137s] [186/258] installing rpm-4.11.0.1-3.20 [ 137s] [187/258] installing buxton2-1.2.7-1.1 [ 140s] warning: user buxton does not exist - using root [ 140s] warning: group buxton does not exist - using root [ 140s] warning: user buxton does not exist - using root [ 140s] warning: group buxton does not exist - using root [ 140s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 140s] /etc/buxton2/*: No such file or directory [ 140s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 140s] /var/lib/buxton2/*: No such file or directory [ 140s] [188/258] installing bundle-0.2.0-2.1 [ 140s] [189/258] installing eina-1.16.0-2.4 [ 141s] [190/258] installing vconf-compat-1.2.7-1.1 [ 141s] [191/258] installing context-common-1.0.1-3.19 [ 141s] [192/258] installing glib2-devel-2.44.1-1.2 [ 141s] [193/258] installing rpm-build-4.11.0.1-3.20 [ 142s] [194/258] installing embryo-1.16.0-2.4 [ 142s] [195/258] installing ector-1.16.0-2.4 [ 142s] [196/258] installing eventsystem-0.1.1-1.1 [ 142s] [197/258] installing emile-1.16.0-2.4 [ 143s] [198/258] installing ecore-core-1.16.0-2.4 [ 143s] [199/258] installing libstorage-0.1.1-1.2 [ 143s] [200/258] installing capi-network-wifi-manager-1.0.14-2.15 [ 143s] [201/258] installing capi-system-device-0.1.0-2.2 [ 144s] [202/258] installing pkgmgr-info-0.4.0-2.1 [ 144s] [203/258] installing bluetooth-frwk-0.2.157-2.13 [ 144s] [204/258] installing libmm-sound-0.10.109-2.1 [ 144s] [205/258] installing ecore-imf-1.16.0-2.4 [ 145s] [206/258] installing eldbus-1.16.0-2.4 [ 145s] [207/258] installing capi-network-bluetooth-0.3.4-2.15 [ 145s] [208/258] installing eet-1.16.0-2.4 [ 146s] [209/258] installing ecore-audio-1.16.0-2.4 [ 146s] [210/258] installing security-privilege-manager-0.0.5-1.5 [ 146s] mdm blacklist exist [ 146s] Check inserted data [ 146s] DPM blacklist... [ 146s] /usr/share/privilege-manager/policy_db_updater.sh: line 26: sqlite3: command not found [ 146s] warning: %post(security-privilege-manager-0.0.5-1.5.armv7l) scriptlet failed, exit status 127 [ 146s] [211/258] installing pkgmgr-installer-0.6.0-2.1 [ 147s] [212/258] installing capi-media-sound-manager-0.3.110-2.1 [ 147s] [213/258] installing pkgmgr-client-0.6.0-2.1 [ 147s] [214/258] installing capi-appfw-package-manager-0.2.0-3.1 [ 148s] [215/258] installing ecore-con-1.16.0-2.4 [ 148s] [216/258] installing eio-1.16.0-2.4 [ 148s] [217/258] installing aul-0.6.4-3.1 [ 148s] [218/258] installing app-svc-0.1.53-2.1 [ 149s] [219/258] installing capi-appfw-app-control-0.5.4-2.18 [ 149s] [220/258] installing capi-appfw-app-common-0.5.4-2.18 [ 149s] [221/258] installing ecore-file-1.16.0-2.4 [ 150s] [222/258] installing ecore-ipc-1.16.0-2.4 [ 150s] [223/258] installing capi-appfw-app-manager-0.5.1-3.1 [ 150s] [224/258] installing app-core-common-1.7.0-3.16 [ 150s] [225/258] installing eeze-1.16.0-2.4 [ 151s] [226/258] installing efreet-1.16.0-2.4 [ 151s] [227/258] installing libkrate-0.0.1-1.23 [ 151s] [228/258] installing notification-0.3.16-2.16 [ 152s] [229/258] installing ecore-input-1.16.0-2.4 [ 152s] [230/258] installing alarm-server-0.5.6-2.18 [ 152s] [231/258] installing ecore-fb-1.16.0-2.4 [ 152s] [232/258] installing ecore-wayland-1.16.0-2.4 [ 152s] [233/258] installing libalarm-0.5.6-2.18 [ 153s] [234/258] installing ecore-drm-1.16.0-2.4 [ 153s] [235/258] installing context-sensor-recorder-dummy-0.0.1-1.18 [ 153s] [236/258] installing ecore-evas-1.16.0-2.4 [ 153s] [237/258] installing capi-system-sensor-0.2.5-1.16 [ 154s] [238/258] installing isf-4.0.2-2.1 [ 154s] [239/258] installing evas-1.16.0-2.4 [ 155s] [240/258] installing isf-devel-4.0.2-2.1 [ 155s] [241/258] installing ecore-imf-evas-1.16.0-2.4 [ 155s] [242/258] installing ecore-input-evas-1.16.0-2.4 [ 155s] [243/258] installing liblbs-location-1.3.11-1.14 [ 155s] [244/258] installing capi-location-manager-0.7.6-2.18 [ 156s] [245/258] installing edje-1.16.0-2.4 [ 156s] [246/258] installing device-policy-manager-full-0.0.1-2.11 [ 156s] [247/258] installing emotion-1.16.0-2.4 [ 156s] [248/258] installing device-policy-manager-0.0.1-2.11 [ 157s] [249/258] installing ethumb-1.16.0-2.4 [ 157s] [250/258] installing libdpm-minimal-0.0.1-2.11 [ 157s] [251/258] installing elementary-1.16.0-1.2 [ 158s] [252/258] installing capi-media-audio-io-0.3.70-2.29 [ 158s] [253/258] installing capi-ui-efl-util-0.4.2-2.1 [ 158s] [254/258] installing voice-control-0.2.10-1.11 [ 159s] [255/258] installing voice-control-elm-0.2.1-1.9 [ 159s] [256/258] installing app-core-efl-1.7.0-3.16 [ 159s] [257/258] installing capi-appfw-application-0.5.4-2.18 [ 159s] [258/258] installing org.tizen.isf-kbd-mode-changer-4.0.2-2.1 [ 160s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 160s] now finalizing build dir... [ 163s] build target is armv7l-tizen-linux [ 163s] ----------------------------------------------------------------- [ 163s] I have the following modifications for ise-engine-hangul.spec: [ 163s] 5c5 [ 163s] < Release: 1 [ 163s] --- [ 163s] > Release: 2.3 [ 163s] 49a50 [ 163s] > %changelog [ 163s] ----------------------------------------------------------------- [ 163s] ----- building ise-engine-hangul.spec (user abuild) [ 163s] ----------------------------------------------------------------- [ 163s] ----------------------------------------------------------------- [ 163s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/5e11186c3443da83b37189f0d1952861-ise-engine-hangul' -ba /home/abuild/rpmbuild/SOURCES/ise-engine-hangul.spec [ 164s] Building target platforms: armv7l-tizen-linux [ 164s] Building for target armv7l-tizen-linux [ 164s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.2Z2gfW [ 164s] + umask 022 [ 164s] + cd /home/abuild/rpmbuild/BUILD [ 164s] + cd /home/abuild/rpmbuild/BUILD [ 164s] + rm -rf ise-engine-hangul-1.0.10 [ 164s] + /bin/tar -xf - [ 164s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-hangul-1.0.10.tar.gz [ 164s] + STATUS=0 [ 164s] + '[' 0 -ne 0 ']' [ 164s] + cd ise-engine-hangul-1.0.10 [ 164s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 164s] + exit 0 [ 164s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.6Pnn3F [ 164s] + umask 022 [ 164s] + cd /home/abuild/rpmbuild/BUILD [ 164s] + cd ise-engine-hangul-1.0.10 [ 164s] ++ uname -m [ 164s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 164s] + LANG=C [ 164s] + export LANG [ 164s] + unset DISPLAY [ 164s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 164s] + export CFLAGS [ 164s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 164s] + export CXXFLAGS [ 164s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 164s] + export FFLAGS [ 164s] + LDFLAGS= [ 164s] + export LDFLAGS [ 164s] + LD_AS_NEEDED=1 [ 164s] + export LD_AS_NEEDED [ 164s] + export 'CFLAGS+= -fvisibility=hidden ' [ 164s] + CFLAGS+=' -fvisibility=hidden ' [ 164s] + export 'CXXFLAGS+= -fvisibility=hidden ' [ 164s] + CXXFLAGS+=' -fvisibility=hidden ' [ 164s] + export 'CPPFLAGS+= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 164s] + CPPFLAGS+=' -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 164s] + ./bootstrap [ 164s] + touch ChangeLog [ 164s] + autopoint --force [ 175s] Copying file ABOUT-NLS [ 175s] Copying file config.rpath [ 177s] Creating directory m4 [ 177s] Copying file m4/codeset.m4 [ 177s] Copying file m4/fcntl-o.m4 [ 177s] Copying file m4/gettext.m4 [ 177s] Copying file m4/glibc2.m4 [ 178s] Copying file m4/glibc21.m4 [ 178s] Copying file m4/iconv.m4 [ 178s] Copying file m4/intdiv0.m4 [ 178s] Copying file m4/intl.m4 [ 179s] Copying file m4/intldir.m4 [ 179s] Copying file m4/intlmacosx.m4 [ 179s] Copying file m4/intmax.m4 [ 179s] Copying file m4/inttypes-pri.m4 [ 180s] Copying file m4/inttypes_h.m4 [ 180s] Copying file m4/lcmessage.m4 [ 180s] Copying file m4/lib-ld.m4 [ 180s] Copying file m4/lib-link.m4 [ 181s] Copying file m4/lib-prefix.m4 [ 181s] Copying file m4/lock.m4 [ 181s] Copying file m4/longlong.m4 [ 181s] Copying file m4/nls.m4 [ 182s] Copying file m4/po.m4 [ 182s] Copying file m4/printf-posix.m4 [ 182s] Copying file m4/progtest.m4 [ 182s] Copying file m4/size_max.m4 [ 183s] Copying file m4/stdint_h.m4 [ 183s] Copying file m4/threadlib.m4 [ 183s] Copying file m4/uintmax_t.m4 [ 183s] Copying file m4/visibility.m4 [ 183s] Copying file m4/wchar_t.m4 [ 184s] Copying file m4/wint_t.m4 [ 184s] Copying file m4/xsize.m4 [ 184s] Copying file po/Makefile.in.in [ 184s] Copying file po/Rules-quot [ 185s] + libtoolize --copy --automake [ 199s] + aclocal -I ./m4 [ 213s] + autoheader [ 219s] + automake --add-missing --copy --include-deps [ 226s] configure.ac:42: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 226s] configure.ac:42: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 226s] configure.ac:42: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 226s] configure.ac:29: installing './compile' [ 229s] + autoconf [ 239s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden ' [ 239s] + export CFLAGS [ 239s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden ' [ 239s] + export CXXFLAGS [ 239s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 239s] + export FFLAGS [ 239s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 242s] checking for a BSD-compatible install... /usr/bin/install -c [ 242s] checking whether build environment is sane... yes [ 242s] /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/missing: Unknown `--is-lightweight' option [ 242s] Try `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/missing --help' for more information [ 242s] configure: WARNING: 'missing' script is too old or missing [ 242s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 242s] checking for gawk... gawk [ 242s] checking whether make sets $(MAKE)... yes [ 242s] checking whether make supports nested variables... yes [ 242s] checking whether make supports nested variables... (cached) yes [ 242s] checking build system type... armv7l-tizen-linux-gnueabi [ 242s] checking host system type... armv7l-tizen-linux-gnueabi [ 243s] checking how to print strings... printf [ 243s] checking for style of include used by make... GNU [ 243s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 243s] checking whether the C compiler works... yes [ 243s] checking for C compiler default output file name... a.out [ 243s] checking for suffix of executables... [ 244s] checking whether we are cross compiling... no [ 244s] checking for suffix of object files... o [ 244s] checking whether we are using the GNU C compiler... yes [ 245s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 245s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 245s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 245s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 245s] checking for a sed that does not truncate output... /usr/bin/sed [ 245s] checking for grep that handles long lines and -e... /usr/bin/grep [ 245s] checking for egrep... /usr/bin/grep -E [ 245s] checking for fgrep... /usr/bin/grep -F [ 246s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 246s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 246s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 246s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 246s] checking whether ln -s works... yes [ 246s] checking the maximum length of command line arguments... 1572864 [ 246s] checking whether the shell understands some XSI constructs... yes [ 246s] checking whether the shell understands "+="... yes [ 246s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 246s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 246s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 246s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 246s] checking for objdump... objdump [ 246s] checking how to recognize dependent libraries... pass_all [ 246s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 246s] checking for dlltool... no [ 246s] checking how to associate runtime and link libraries... printf %s\n [ 246s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 246s] checking for ar... ar [ 246s] checking for archiver @FILE support... @ [ 246s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 246s] checking for strip... strip [ 246s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 246s] checking for ranlib... ranlib [ 247s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 247s] checking for sysroot... no [ 247s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 247s] checking for mt... no [ 247s] checking if : is a manifest tool... no [ 247s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 248s] checking for ANSI C header files... yes [ 249s] checking for sys/types.h... yes [ 249s] checking for sys/stat.h... yes [ 249s] checking for stdlib.h... yes [ 250s] checking for string.h... yes [ 250s] checking for memory.h... yes [ 250s] checking for strings.h... yes [ 251s] checking for inttypes.h... yes [ 251s] checking for stdint.h... yes [ 251s] checking for unistd.h... yes [ 252s] checking for dlfcn.h... yes [ 252s] checking for objdir... .libs [ 252s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 252s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 253s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 253s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 253s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 253s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 253s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 253s] checking whether -lc should be explicitly linked in... no [ 254s] checking dynamic linker characteristics... GNU/Linux ld.so [ 254s] checking how to hardcode library paths into programs... immediate [ 254s] checking for shl_load... no [ 255s] checking for shl_load in -ldld... no [ 255s] checking for dlopen... no [ 255s] checking for dlopen in -ldl... yes [ 255s] checking whether a program can dlopen itself... yes [ 256s] checking whether a statically linked program can dlopen itself... yes [ 256s] checking whether stripping libraries is possible... yes [ 256s] checking if libtool supports shared libraries... yes [ 256s] checking whether to build shared libraries... yes [ 256s] checking whether to build static libraries... no [ 256s] checking which extension is used for runtime loadable modules... .so [ 256s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 256s] checking for the default library search path... /lib /usr/lib /usr/local/lib /emul/lib [ 256s] checking for library containing dlopen... -ldl [ 257s] checking for dlerror... yes [ 257s] checking for shl_load... (cached) no [ 257s] checking for shl_load in -ldld... (cached) no [ 257s] checking for dld_link in -ldld... no [ 257s] checking for _ prefix in compiled symbols... no [ 257s] checking whether deplibs are loaded by dlopen... yes [ 257s] checking for argz.h... yes [ 258s] checking for error_t... yes [ 258s] checking for argz_add... yes [ 259s] checking for argz_append... yes [ 259s] checking for argz_count... yes [ 259s] checking for argz_create_sep... yes [ 260s] checking for argz_insert... yes [ 260s] checking for argz_next... yes [ 260s] checking for argz_stringify... yes [ 260s] checking if argz actually works... yes [ 260s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 261s] checking for ltdl.h... yes [ 261s] checking whether lt_dlinterface_register is declared... yes [ 261s] checking for lt_dladvise_preload in -lltdl... yes [ 261s] checking where to find libltdl headers... [ 261s] checking where to find libltdl library... -lltdl [ 261s] checking for unistd.h... (cached) yes [ 262s] checking for dl.h... no [ 262s] checking for sys/dl.h... no [ 262s] checking for dld.h... no [ 263s] checking for mach-o/dyld.h... no [ 263s] checking for dirent.h... yes [ 263s] checking for closedir... yes [ 263s] checking for opendir... yes [ 264s] checking for readdir... yes [ 264s] checking for strlcat... no [ 264s] checking for strlcpy... no [ 264s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 265s] checking whether we are using the GNU C++ compiler... yes [ 265s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 266s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 266s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 267s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 267s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 267s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 268s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 268s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 268s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 268s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 268s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 268s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 268s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 268s] checking how to hardcode library paths into programs... immediate [ 268s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 269s] checking whether we are using the GNU C compiler... (cached) yes [ 269s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 269s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 269s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 269s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 269s] checking for an ANSI C-conforming const... yes [ 270s] checking for size_t... yes [ 270s] checking whether NLS is requested... yes [ 270s] checking for msgfmt... /usr/bin/msgfmt [ 270s] checking for gmsgfmt... /usr/bin/msgfmt [ 270s] checking for xgettext... /usr/bin/xgettext [ 270s] checking for msgmerge... /usr/bin/msgmerge [ 271s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 271s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 271s] checking for shared library run path origin... done [ 271s] checking for CFPreferencesCopyAppValue... no [ 271s] checking for CFLocaleCopyCurrent... no [ 272s] checking for GNU gettext in libc... yes [ 272s] checking whether to use NLS... yes [ 272s] checking where the gettext function comes from... libc [ 272s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /usr/bin/armv7l-tizen-linux-gnueabi-pkg-config [ 272s] checking pkg-config is at least version 0.9.0... yes [ 272s] checking for LIBHANGUL... yes [ 273s] checking for SCIM... yes [ 273s] checking for SCIM_GTKUTILS... no [ 273s] checking for ANSI C header files... (cached) yes [ 274s] checking that generated files are newer than configure... done [ 274s] configure: creating ./config.status [ 283s] config.status: creating Makefile [ 283s] config.status: creating po/Makefile.in [ 284s] config.status: creating src/Makefile [ 284s] config.status: creating data/Makefile [ 284s] config.status: creating scim-hangul.spec [ 284s] config.status: creating config.h [ 285s] config.status: executing depfiles commands [ 286s] config.status: executing libtool commands [ 287s] config.status: executing po-directories commands [ 287s] config.status: creating po/POTFILES [ 287s] config.status: setting ALL_LINGUAS in configure.in is obsolete [ 287s] config.status: creating po/Makefile [ 287s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/libltdl) [ 287s] configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--build=armv7l-tizen-linux-gnueabi' '--host=armv7l-tizen-linux-gnueabi' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=armv7l-tizen-linux-gnueabi' 'host_alias=armv7l-tizen-linux-gnueabi' 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden ' 'LDFLAGS=' 'CPPFLAGS= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' 'CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden ' --cache-file=/dev/null --srcdir=. [ 290s] checking for a BSD-compatible install... /usr/bin/install -c [ 291s] checking whether build environment is sane... yes [ 291s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 291s] checking for gawk... gawk [ 291s] checking whether make sets $(MAKE)... yes [ 291s] checking build system type... armv7l-tizen-linux-gnueabi [ 291s] checking host system type... armv7l-tizen-linux-gnueabi [ 291s] checking how to print strings... printf [ 291s] checking for style of include used by make... GNU [ 291s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 292s] checking whether the C compiler works... yes [ 292s] checking for C compiler default output file name... a.out [ 292s] checking for suffix of executables... [ 292s] checking whether we are cross compiling... no [ 293s] checking for suffix of object files... o [ 293s] checking whether we are using the GNU C compiler... yes [ 293s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 294s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 295s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 295s] checking for a sed that does not truncate output... /usr/bin/sed [ 295s] checking for grep that handles long lines and -e... /usr/bin/grep [ 295s] checking for egrep... /usr/bin/grep -E [ 295s] checking for fgrep... /usr/bin/grep -F [ 295s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 295s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 295s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 295s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 295s] checking whether ln -s works... yes [ 295s] checking the maximum length of command line arguments... 1572864 [ 295s] checking whether the shell understands some XSI constructs... yes [ 295s] checking whether the shell understands "+="... yes [ 295s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 295s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 295s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 295s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 295s] checking for objdump... objdump [ 295s] checking how to recognize dependent libraries... pass_all [ 295s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 295s] checking for dlltool... no [ 295s] checking how to associate runtime and link libraries... printf %s\n [ 295s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 295s] checking for ar... ar [ 296s] checking for archiver @FILE support... @ [ 296s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 296s] checking for strip... strip [ 296s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 296s] checking for ranlib... ranlib [ 296s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 296s] checking for sysroot... no [ 296s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 296s] checking for mt... no [ 296s] checking if : is a manifest tool... no [ 297s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 298s] checking for ANSI C header files... yes [ 298s] checking for sys/types.h... yes [ 298s] checking for sys/stat.h... yes [ 299s] checking for stdlib.h... yes [ 299s] checking for string.h... yes [ 299s] checking for memory.h... yes [ 300s] checking for strings.h... yes [ 300s] checking for inttypes.h... yes [ 300s] checking for stdint.h... yes [ 301s] checking for unistd.h... yes [ 301s] checking for dlfcn.h... yes [ 301s] checking for objdir... .libs [ 301s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 301s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 302s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 302s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 302s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 302s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 302s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 303s] checking whether -lc should be explicitly linked in... no [ 303s] checking dynamic linker characteristics... GNU/Linux ld.so [ 303s] checking how to hardcode library paths into programs... immediate [ 303s] checking for shl_load... no [ 303s] checking for shl_load in -ldld... no [ 304s] checking for dlopen... no [ 304s] checking for dlopen in -ldl... yes [ 304s] checking whether a program can dlopen itself... yes [ 305s] checking whether a statically linked program can dlopen itself... yes [ 305s] checking whether stripping libraries is possible... yes [ 305s] checking if libtool supports shared libraries... yes [ 305s] checking whether to build shared libraries... yes [ 305s] checking whether to build static libraries... no [ 305s] checking which extension is used for runtime loadable modules... .so [ 305s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 305s] checking for the default library search path... /lib /usr/lib /usr/local/lib /emul/lib [ 305s] checking for library containing dlopen... -ldl [ 306s] checking for dlerror... yes [ 306s] checking for shl_load... (cached) no [ 306s] checking for shl_load in -ldld... (cached) no [ 306s] checking for dld_link in -ldld... no [ 306s] checking for _ prefix in compiled symbols... no [ 306s] checking whether deplibs are loaded by dlopen... yes [ 306s] checking for argz.h... yes [ 307s] checking for error_t... yes [ 307s] checking for argz_add... yes [ 307s] checking for argz_append... yes [ 308s] checking for argz_count... yes [ 308s] checking for argz_create_sep... yes [ 309s] checking for argz_insert... yes [ 309s] checking for argz_next... yes [ 309s] checking for argz_stringify... yes [ 309s] checking if argz actually works... yes [ 309s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 309s] checking for unistd.h... (cached) yes [ 310s] checking for dl.h... no [ 310s] checking for sys/dl.h... no [ 310s] checking for dld.h... no [ 310s] checking for mach-o/dyld.h... no [ 311s] checking for dirent.h... yes [ 311s] checking for closedir... yes [ 311s] checking for opendir... yes [ 312s] checking for readdir... yes [ 312s] checking for strlcat... no [ 312s] checking for strlcpy... no [ 313s] configure: creating ./config.status [ 320s] config.status: creating Makefile [ 320s] config.status: creating config.h [ 320s] config.status: executing depfiles commands [ 322s] config.status: executing libtool commands [ 323s] + make -j8 [ 324s] make all-recursive [ 324s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 324s] Making all in src [ 324s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 324s] /bin/sh ../libtool --tag=CXX --mode=compile armv7l-tizen-linux-gnueabi-g++ -DHAVE_CONFIG_H -I. -I.. -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\) -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c -o hangul_la-scim_hangul_imengine.lo `test -f 'scim_hangul_imengine.cpp' || echo './'`scim_hangul_imengine.cpp [ 324s] libtool: compile: armv7l-tizen-linux-gnueabi-g++ -DHAVE_CONFIG_H -I. -I.. "-DEXPORTED=__attribute__((visibility(\"default\")))" -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c scim_hangul_imengine.cpp -fPIC -DPIC -o .libs/hangul_la-scim_hangul_imengine.o [ 328s] mv -f .deps/hangul_la-scim_hangul_imengine.Tpo .deps/hangul_la-scim_hangul_imengine.Plo [ 328s] /bin/sh ../libtool --tag=CXX --mode=link armv7l-tizen-linux-gnueabi-g++ -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden -avoid-version -rpath /usr/lib/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0 -lhangul -o hangul.la -rpath /usr/lib/scim-1.0/1.4.0/IMEngine hangul_la-scim_hangul_imengine.lo -ldl [ 328s] libtool: link: /usr/bin/nm -B .libs/hangul_la-scim_hangul_imengine.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' | /usr/bin/sed 's/.* //' | sort | uniq > .libs/hangul.exp [ 329s] libtool: link: /usr/bin/grep -E -e "^[^_].*" ".libs/hangul.exp" > ".libs/hangul.expT" [ 329s] libtool: link: mv -f ".libs/hangul.expT" ".libs/hangul.exp" [ 329s] libtool: link: armv7l-tizen-linux-gnueabi-g++ -fPIC -DPIC -shared -nostdlib /lib/crti.o /usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/crtbeginS.o .libs/hangul_la-scim_hangul_imengine.o -Wl,--as-needed -lscim-1.0 -lhangul -ldl -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1 -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/../../../../armv7l-tizen-linux-gnueabi/lib -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/crtendS.o /lib/crtn.o -O2 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wl,-soname -Wl,hangul.so -Wl,-retain-symbols-file -Wl,.libs/hangul.exp -o .libs/hangul.so [ 329s] libtool: link: ( cd ".libs" && rm -f "hangul.la" && ln -s "../hangul.la" "hangul.la" ) [ 329s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 329s] Making all in data [ 329s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 329s] make[2]: Nothing to be done for 'all'. [ 329s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 329s] Making all in po [ 329s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 329s] test ! -f ./scim-hangul.pot || \ [ 329s] test -z "de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo" || make de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo [ 329s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 329s] rm -f fr.gmo && /usr/bin/msgfmt -c --statistics --verbose -o fr.gmo fr.po [ 329s] rm -f zh_CN.gmo && /usr/bin/msgfmt -c --statistics --verbose -o zh_CN.gmo zh_CN.po [ 329s] rm -f pa.gmo && /usr/bin/msgfmt -c --statistics --verbose -o pa.gmo pa.po [ 329s] rm -f ja.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ja.gmo ja.po [ 329s] rm -f de.gmo && /usr/bin/msgfmt -c --statistics --verbose -o de.gmo de.po [ 329s] rm -f nl.gmo && /usr/bin/msgfmt -c --statistics --verbose -o nl.gmo nl.po [ 329s] rm -f ko.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ko.gmo ko.po [ 329s] fr.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 329s] ja.po: 9 translated messages, 8 fuzzy translations, 10 untranslated messages. [ 329s] zh_CN.po: 8 translated messages, 9 fuzzy translations, 10 untranslated messages. [ 329s] pa.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 329s] de.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 329s] ko.po: 27 translated messages. [ 329s] nl.po: 27 translated messages. [ 329s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 329s] touch stamp-po [ 329s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 329s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 329s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 329s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 329s] + exit 0 [ 329s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.H3zi5R [ 329s] + umask 022 [ 329s] + cd /home/abuild/rpmbuild/BUILD [ 329s] + cd ise-engine-hangul-1.0.10 [ 329s] + LANG=C [ 329s] + export LANG [ 329s] + unset DISPLAY [ 329s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm [ 329s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm [ 329s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm [ 329s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm install [ 329s] Making install in src [ 329s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 329s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 329s] make[2]: Nothing to be done for 'install-exec-am'. [ 330s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/lib/scim-1.0/1.4.0/IMEngine' [ 330s] /bin/sh ../libtool --mode=install /usr/bin/install -c hangul.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/lib/scim-1.0/1.4.0/IMEngine' [ 330s] libtool: install: /usr/bin/install -c .libs/hangul.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 330s] libtool: install: /usr/bin/install -c .libs/hangul.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.la [ 330s] libtool: install: warning: remember to run `libtool --finish /usr/lib/scim-1.0/1.4.0/IMEngine' [ 330s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 330s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/src' [ 330s] Making install in data [ 330s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 330s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 330s] make[2]: Nothing to be done for 'install-exec-am'. [ 330s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/scim/icons' [ 330s] /usr/bin/install -c -m 644 scim-hangul.png scim-hangul-on.png scim-hangul-off.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/scim/icons' [ 330s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/scim/hangul' [ 330s] /usr/bin/install -c -m 644 symbol.txt '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/scim/hangul' [ 330s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 330s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/data' [ 330s] Making install in po [ 330s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 330s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/locale/de/LC_MESSAGES/scim-hangul.mo [ 331s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/locale/fr/LC_MESSAGES/scim-hangul.mo [ 331s] installing ja.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/locale/ja/LC_MESSAGES/scim-hangul.mo [ 331s] installing ko.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/locale/ko/LC_MESSAGES/scim-hangul.mo [ 331s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/locale/nl/LC_MESSAGES/scim-hangul.mo [ 331s] installing pa.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/locale/pa/LC_MESSAGES/scim-hangul.mo [ 332s] installing zh_CN.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/locale/zh_CN/LC_MESSAGES/scim-hangul.mo [ 332s] if test "scim-hangul" = "gettext-tools"; then \ [ 332s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/gettext/po; \ [ 332s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 332s] /usr/bin/install -c -m 644 ./$file \ [ 332s] /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/gettext/po/$file; \ [ 332s] done; \ [ 332s] for file in Makevars; do \ [ 332s] rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/gettext/po/$file; \ [ 332s] done; \ [ 332s] else \ [ 332s] : ; \ [ 332s] fi [ 332s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10/po' [ 332s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 332s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 332s] make[2]: Nothing to be done for 'install-exec-am'. [ 332s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/packages' [ 332s] /usr/bin/install -c -m 644 hangul.xml '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/packages' [ 332s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 332s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10' [ 332s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/info/dir [ 332s] + xargs rm -f -- [ 332s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm -regex '.*\.la$' [ 332s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm -regex '.*\.a$' [ 332s] + xargs rm -f -- [ 332s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.10 [ 332s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 333s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 333s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 333s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 333s] 59 blocks [ 333s] + /usr/lib/rpm/check-buildroot [ 333s] + /usr/lib/rpm//brp-compress [ 333s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 334s] + /usr/lib/rpm/brp-python-hardlink [ 334s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm [ 334s] Processing files: ise-engine-hangul-1.0.10-2.3.armv7l [ 334s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 334s] cmVxdWVzdD4KPGFzc2lnbj4KICAgIDxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmlu [ 334s] LyoiIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CjwvYXNzaWduPgo8L21hbmlmZXN0Pgo= [ 334s] [ 334s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.5AAaxi [ 334s] + umask 022 [ 334s] + cd /home/abuild/rpmbuild/BUILD [ 334s] + cd ise-engine-hangul-1.0.10 [ 334s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/licenses/ise-engine-hangul [ 334s] + export LICENSEDIR [ 334s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/licenses/ise-engine-hangul [ 334s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm/usr/share/licenses/ise-engine-hangul [ 334s] + exit 0 [ 334s] Provides: hangul.so ise-engine-hangul = 1.0.10-2.3 ise-engine-hangul(armv7l-32) = 1.0.10-2.3 [ 334s] Requires(interp): /bin/sh /bin/sh [ 334s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 334s] Requires(post): /bin/sh [ 334s] Requires(postun): /bin/sh [ 334s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libhangul.so.1 libscim-1.0.so.8 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.9) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 334s] Processing files: ise-engine-hangul-debugsource-1.0.10-2.3.armv7l [ 334s] Provides: ise-engine-hangul-debugsource = 1.0.10-2.3 ise-engine-hangul-debugsource(armv7l-32) = 1.0.10-2.3 [ 334s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 334s] Processing files: ise-engine-hangul-debuginfo-1.0.10-2.3.armv7l [ 334s] Provides: ise-engine-hangul-debuginfo = 1.0.10-2.3 ise-engine-hangul-debuginfo(armv7l-32) = 1.0.10-2.3 [ 334s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 334s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm [ 334s] warning: Could not canonicalize hostname: obspw09 [ 334s] Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-1.0.10-2.3.src.rpm [ 335s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-1.0.10-2.3.armv7l.rpm [ 335s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debugsource-1.0.10-2.3.armv7l.rpm [ 335s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debuginfo-1.0.10-2.3.armv7l.rpm [ 335s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.aELu0B [ 335s] + umask 022 [ 335s] + cd /home/abuild/rpmbuild/BUILD [ 335s] + cd ise-engine-hangul-1.0.10 [ 335s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.10-2.3.arm [ 335s] + exit 0 [ 335s] ... checking for files with abuild user/group [ 335s] ... creating baselibs [ 337s] ... comparing built packages with the former built [ 337s] /usr/lib/build/pkg-diff.sh [ 337s] different number of subpackages [ 337s] /.build.oldpackages/ise-engine-hangul-debugsource-1.0.10-2.2.armv7l.rpm [ 337s] /.build.oldpackages/ise-engine-hangul-1.0.10-2.2.armv7l.rpm [ 337s] /.build.oldpackages/ise-engine-hangul-debuginfo-1.0.10-2.2.armv7l.rpm [ 337s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debuginfo-1.0.10-2.3.armv7l.rpm [ 337s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-1.0.10-2.3.armv7l.rpm [ 337s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debugsource-1.0.10-2.3.armv7l.rpm [ 337s] /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-1.0.10-2.3.src.rpm [ 337s] [ 337s] obspw09 finished "build ise-engine-hangul.spec" at Sun Apr 23 03:10:25 UTC 2017. [ 337s] Retried build at Tue Apr 25 05:10:15 2017 returned same result, skipped Retried build at Tue Apr 25 08:50:07 2017 returned same result, skipped Retried build at Wed Apr 26 06:53:05 2017 returned same result, skipped Retried build at Wed Apr 26 20:22:39 2017 returned same result, skipped Retried build at Thu Apr 27 02:16:11 2017 returned same result, skipped Retried build at Thu Apr 27 17:36:30 2017 returned same result, skipped Retried build at Thu Apr 27 19:07:24 2017 returned same result, skipped