[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw08 started "build _service:gbs:dracut.spec" at Fri May 19 22:03:53 UTC 2017. [ 0s] [ 0s] Building dracut for project 'Tizen:Unified' repository 'emulator' arch 'i586' srcmd5 'bdf4bc6c191a364c6a609eb310c8d80f' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 2s] [30/35] preinstalling tar... [ 2s] [31/35] preinstalling util-linux... [ 2s] [32/35] preinstalling util-linux-su... [ 2s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] running setup postinstall script [ 2s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 2s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 2s] initializing rpm db... [ 2s] reordering...cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] done [ 2s] [1/119] installing libmagic-data-5.28-4.6 [ 2s] [2/119] installing setup-0.9-3.20 [ 2s] [3/119] installing terminfo-base-5.9-3.31 [ 2s] [4/119] installing filesystem-3.1-3.2 [ 2s] [5/119] installing glibc-2.24-3.17 [ 3s] [6/119] installing bash-3.2.57-4.1 [ 3s] [7/119] installing binutils-2.27-4.26 [ 3s] [8/119] installing cpio-2.11-3.3 [ 3s] [9/119] installing diffutils-3.3-3.1 [ 3s] [10/119] installing findutils-4.3.8-3.32 [ 3s] [11/119] installing hostname-3.12-4.1 [ 3s] [12/119] installing libatomic-6.2.1-6.2 [ 3s] [13/119] installing libattr-2.4.47-3.29 [ 3s] [14/119] installing libbz2-1.0.6-4.29 [ 3s] [15/119] installing libcap-2.24-3.26 [ 4s] [16/119] installing libcares-1.10.0-3.1 [ 4s] [17/119] installing libelf-0.153-3.18 [ 4s] [18/119] installing libexpat-2.2.0-3.32 [ 4s] [19/119] installing libext2fs-1.42.13-3.3 [ 4s] [20/119] installing libfreebl3-3.23-3.25 [ 4s] [21/119] installing libgcc-6.2.1-6.2 [ 4s] [22/119] installing libgomp-6.2.1-6.2 [ 4s] [23/119] installing libgpg-error-1.13-4.44 [ 4s] [24/119] installing libitm-6.2.1-6.2 [ 4s] [25/119] installing libltdl-2.4.2-4.30 [ 4s] [26/119] installing liblua-5.1.4-3.8 [ 4s] [27/119] installing liblzma-5.2.2-3.29 [ 5s] [28/119] installing libpcre-8.39-3.4 [ 5s] [29/119] installing libpopt-1.16-4.8 [ 5s] [30/119] installing libpython-2.7.8-3.24 [ 5s] [31/119] installing libquadmath-6.2.1-6.2 [ 5s] [32/119] installing libsmack-1.3.0-3.29 [ 5s] [33/119] installing libsmartcols-2.28-3.1 [ 5s] [34/119] installing libsqlite-3.18.0-5.2 [ 5s] [35/119] installing libuuid-2.28-3.1 [ 5s] [36/119] installing m4-1.4.17-3.1 [ 5s] [37/119] installing net-tools-2.0_20121208git-3.1 [ 5s] [38/119] installing nghttp2-1.20.0-3.3 [ 5s] [39/119] installing nspr-4.12-3.8 [ 5s] [40/119] installing patch-2.7-3.8 [ 5s] [41/119] installing pkg-config-0.28-4.30 [ 5s] [42/119] installing sed-4.1c-3.1 [ 5s] [43/119] installing update-alternatives-1.18.15-3.1 [ 5s] [44/119] installing which-2.20-6.1 [ 5s] [45/119] installing zlib-1.2.8-3.32 [ 6s] [46/119] installing libncurses-5.9-3.31 [ 6s] [47/119] installing shadow-utils-4.1.4.2-3.2 [ 6s] [48/119] installing build-compare-2015.04.28-3.24 [ 6s] [49/119] installing coreutils-6.9-3.1 [ 6s] [50/119] installing cpp-6.2.1-6.2 [ 7s] [51/119] installing dash-0.5.7-4.1 [ 7s] [52/119] installing gawk-3.1.5-3.1 [ 7s] [53/119] installing gcc-c++-6.2.1-6.2 [ 8s] [54/119] installing grep-2.5.2-3.1 [ 8s] [55/119] installing less-466-8.1 [ 8s] [56/119] installing libacl-2.2.52-3.35 [ 8s] [57/119] installing libasm-0.153-3.18 [ 8s] [58/119] installing libblkid-2.28-3.1 [ 8s] [59/119] installing libgcrypt-1.7.6-4.1 [ 8s] [60/119] installing libopenssl-1.0.2j-3.29 [ 8s] [61/119] installing libreadline-5.2-3.28 [ 8s] [62/119] installing libstdc++-6.2.1-6.2 [ 8s] [63/119] installing make-4.0-3.7 [ 8s] [64/119] installing nss-certs-3.23-3.25 [ 8s] [65/119] installing procps-ng-3.3.9-3.2 [ 8s] [66/119] installing smack-1.3.0-3.29 [ 8s] [67/119] installing bzip2-1.0.6-4.29 [ 8s] [68/119] installing libgfortran-6.2.1-6.2 [ 8s] [69/119] installing libmagic-5.28-4.6 [ 8s] [70/119] installing libxml2-2.9.4-4.28 [ 8s] [71/119] installing xz-5.2.2-3.29 [ 8s] [72/119] installing libdw-0.153-3.18 [ 9s] [73/119] installing libstdc++-devel-6.2.1-6.2 [ 9s] [74/119] installing file-5.28-4.6 [ 9s] [75/119] installing libmount-2.28-3.1 [ 9s] [76/119] installing linux-glibc-devel-3.10-3.32 [ 9s] [77/119] installing tar-1.17-3.1 [ 9s] [78/119] installing db4-4.8.30.NC-3.33 [ 9s] [79/119] installing glibc-locale-2.24-3.17 [ 10s] [80/119] installing gzip-1.3.12-3.26 [ 10s] [81/119] installing libcc1-6.2.1-6.2 [ 10s] [82/119] installing libcilkrts-6.2.1-6.2 [ 10s] [83/119] installing libfdisk1-2.28-3.1 [ 10s] [84/119] installing libubsan-6.2.1-6.2 [ 10s] [85/119] installing libxml2-tools-2.9.4-4.28 [ 10s] [86/119] installing pam-1.1.6-3.2 [ 10s] [87/119] installing rsync-3.1.1-1.4 [ 10s] [88/119] installing tzdata-2016i-4.1 [ 10s] [89/119] installing libcurl-7.53.1-1.2 [ 10s] [90/119] installing elfutils-0.153-3.18 [ 10s] [91/119] installing libxslt-1.1.29-3.2 [ 10s] [92/119] installing glibc-devel-2.24-3.17 [ 10s] [93/119] installing libxslt-tools-1.1.29-3.2 [ 10s] [94/119] installing pam-modules-extra-1.1.6-3.2 [ 10s] [95/119] installing perl-5.20.0-4.13 [ 12s] [96/119] installing sgml-skel-0.6-3.1 [ 12s] [97/119] installing python-2.7.8-3.24 [ 13s] [98/119] installing gcc-6.2.1-6.2 [ 14s] [99/119] installing util-linux-2.28-3.1 [ 14s] [100/119] installing build-mkbaselibs-20120927-3.1 [ 14s] [101/119] installing perl-Error-0.17017-2.2 [ 14s] [102/119] installing iso_ent-2000.11.03-2.1 [ 14s] [103/119] installing autoconf-2.69-3.35 [ 14s] [104/119] installing python-xml-2.7.8-3.24 [ 14s] [105/119] installing util-linux-su-2.28-3.1 [ 14s] [106/119] installing xmlcharent-0.3-2.1 [ 14s] [107/119] installing openssh-6.6p1-3.2 [ 14s] Usage: groupadd [options] GROUP [ 14s] [ 14s] Options: [ 14s] -f, --force exit successfully if the group already exists, [ 14s] and cancel -g if the GID is already used [ 14s] -g, --gid GID use GID for the new group [ 14s] -h, --help display this help message and exit [ 14s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 14s] -o, --non-unique allow to create groups with duplicate [ 14s] (non-unique) GID [ 14s] -p, --password PASSWORD use this encrypted password for the new group [ 14s] -r, --system create a system account [ 14s] [ 14s] [108/119] installing automake-1.14.1-3.30 [ 14s] [109/119] installing build-20120927-3.1 [ 14s] [110/119] installing docbook_4-4.5-2.1 [ 15s] [111/119] installing git-core-2.0.1-1.11 [ 15s] [112/119] installing git-2.0.1-1.11 [ 15s] [113/119] installing libtool-2.4.2-4.30 [ 15s] [114/119] installing docbook-xsl-stylesheets-1.78.1-2.1 [ 16s] [115/119] installing asciidoc-8.6.6-2.1 [ 16s] [116/119] installing nss-3.23-3.25 [ 16s] [117/119] installing libsoftokn3-3.23-3.25 [ 16s] [118/119] installing rpm-4.11.0.1-4.16 [ 16s] [119/119] installing rpm-build-4.11.0.1-4.16 [ 16s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 16s] now finalizing build dir... [ 17s] build target is i686-tizen-linux [ 17s] ----------------------------------------------------------------- [ 17s] I have the following modifications for dracut.spec: [ 17s] 9c9 [ 17s] < Release: 0 [ 17s] --- [ 17s] > Release: 3.8 [ 17s] 256a257 [ 17s] > %changelog [ 17s] ----------------------------------------------------------------- [ 17s] ----- building dracut.spec (user abuild) [ 17s] ----------------------------------------------------------------- [ 17s] ----------------------------------------------------------------- [ 17s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/emulator/bdf4bc6c191a364c6a609eb310c8d80f-dracut' -ba /home/abuild/rpmbuild/SOURCES/dracut.spec [ 17s] Building target platforms: i686-tizen-linux [ 17s] Building for target i686-tizen-linux [ 17s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.o12spQ [ 17s] + umask 022 [ 17s] + cd /home/abuild/rpmbuild/BUILD [ 17s] + cd /home/abuild/rpmbuild/BUILD [ 17s] + rm -rf dracut-032 [ 17s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 17s] + /bin/tar -xf - [ 17s] + STATUS=0 [ 17s] + '[' 0 -ne 0 ']' [ 17s] + cd dracut-032 [ 17s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 17s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 17s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 17s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 17s] + /bin/patch -p1 --fuzz=2 [ 17s] patching file Makefile [ 17s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 17s] + exit 0 [ 17s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QkyGZ4 [ 17s] + umask 022 [ 17s] + cd /home/abuild/rpmbuild/BUILD [ 17s] + cd dracut-032 [ 17s] ++ uname -m [ 17s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 17s] + LANG=C [ 17s] + export LANG [ 17s] + unset DISPLAY [ 17s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 17s] + export CFLAGS [ 17s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu++11' [ 17s] + export CXXFLAGS [ 17s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 17s] + export FFLAGS [ 17s] + LDFLAGS= [ 17s] + export LDFLAGS [ 17s] + LD_AS_NEEDED=1 [ 17s] + export LD_AS_NEEDED [ 17s] + make all [ 17s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 17s] install/dracut-install.c: In function 'resolve_deps': [ 17s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 17s] read(fd, buf, LINE_MAX); [ 17s] ^~~~~~~~~~~~~~~~~~~~~~~ [ 17s] install/dracut-install.c: In function 'cp': [ 17s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 17s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 17s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 17s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 17s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 18s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 18s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 18s] ln -fs install/dracut-install dracut-install [ 18s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 18s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 18s] Note: Writing lsinitrd.1 [ 18s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 19s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 19s] Note: Writing dracut.conf.5 [ 19s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 20s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 20s] Note: Writing dracut.cmdline.7 [ 20s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 21s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 21s] Note: Writing dracut.bootup.7 [ 21s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 22s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 22s] Note: Writing dracut.8 [ 22s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 22s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 22s] Note: Writing dracut-catimages.8 [ 22s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 23s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 23s] Note: Writing mkinitrd.8 [ 23s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 23s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 23s] Note: Writing dracut-cmdline.service.8 [ 23s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 24s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 24s] Note: Writing dracut-initqueue.service.8 [ 24s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 24s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 24s] Note: Writing dracut-mount.service.8 [ 24s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 25s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 25s] Note: Writing dracut-shutdown.service.8 [ 25s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 25s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 25s] Note: Writing dracut-pre-mount.service.8 [ 25s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 26s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 26s] Note: Writing dracut-pre-pivot.service.8 [ 26s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 26s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 26s] Note: Writing dracut-pre-trigger.service.8 [ 26s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 26s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 27s] Note: Writing dracut-pre-udev.service.8 [ 27s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 30s] xsltproc -o dracut.html --xinclude -nonet \ [ 30s] --stringparam html.stylesheet \ [ 30s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 30s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 30s] rm -f -- dracut.xml [ 30s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 30s] + exit 0 [ 30s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.pbLG7Z [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd dracut-032 [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 [ 30s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/bin [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/etc [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/modules.d [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man8 [ 30s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/bin/dracut [ 30s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/bin/dracut-catimages [ 30s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/bin/mkinitrd [ 30s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/bin/lsinitrd [ 30s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/etc/dracut.conf [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/etc/dracut.conf.d [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut.conf.d [ 30s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut-functions.sh [ 30s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut-version.sh [ 30s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut-functions [ 30s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut-logger.sh [ 30s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut-initramfs-restore [ 30s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut [ 30s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man1/${i##*/}; done [ 30s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man5/${i##*/}; done [ 30s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man7/${i##*/}; done [ 30s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man8/${i##*/}; done [ 30s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/man/man7/dracut.kernel.7 [ 30s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/systemd/system; \ [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/systemd/system/shutdown.target.wants; \ [ 30s] ln -s ../dracut-shutdown.service \ [ 30s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/systemd/system/initrd.target.wants; \ [ 30s] for i in \ [ 30s] dracut-cmdline.service \ [ 30s] dracut-initqueue.service \ [ 30s] dracut-mount.service \ [ 30s] dracut-pre-mount.service \ [ 30s] dracut-pre-pivot.service \ [ 30s] dracut-pre-trigger.service \ [ 30s] dracut-pre-udev.service \ [ 30s] ; do \ [ 30s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 30s] ln -s ../$i \ [ 30s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 30s] done \ [ 30s] fi [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] if [ -f install/dracut-install ]; then \ [ 30s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut-install; \ [ 30s] fi [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/kernel/install.d [ 30s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/kernel/install.d/50-dracut.install [ 30s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/kernel/install.d/51-dracut-rescue.install [ 30s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/bash-completion/completions [ 30s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/bash-completion/completions/dracut [ 30s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/bash-completion/completions/lsinitrd [ 30s] + echo DRACUT_VERSION=032-3.8 [ 30s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386//usr/lib/dracut/modules.d/01fips [ 30s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386//usr/lib/dracut/modules.d/02fips-aesni [ 30s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386//usr/lib/dracut/modules.d/50gensplash [ 30s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386//usr/lib/dracut/modules.d/96securityfs [ 30s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386//usr/lib/dracut/modules.d/97masterkey [ 30s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386//usr/lib/dracut/modules.d/98integrity [ 30s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386//usr/lib/dracut/modules.d/98selinux [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/boot/dracut [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/var/lib/dracut/overlay [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/var/log [ 30s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/var/log/dracut.log [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/com/initramfs [ 30s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/etc/dracut.conf.d/01-dist.conf [ 30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/etc/logrotate.d [ 30s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/etc/logrotate.d/dracut_log [ 30s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 30s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/lib/dracut/dracut-install [ 31s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 31s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 31s] cpio: glibc-2.24/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 31s] cpio: glibc-2.24/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 31s] cpio: glibc-2.24/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 31s] 195 blocks [ 31s] + /usr/lib/rpm/check-buildroot [ 31s] + /usr/lib/rpm//brp-compress [ 31s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 31s] + /usr/lib/rpm/brp-python-hardlink [ 31s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 [ 31s] Processing files: dracut-032-3.8.i686 [ 31s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 31s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 31s] [ 31s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ia11uY [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd dracut-032 [ 31s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/licenses/dracut [ 31s] + export LICENSEDIR [ 31s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/licenses/dracut [ 31s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386/usr/share/licenses/dracut [ 31s] + exit 0 [ 32s] Provides: config(dracut) = 032-3.8 dracut = 032-3.8 dracut(x86-32) = 032-3.8 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) [ 32s] Conflicts: systemd < 187 [ 32s] Processing files: dracut-debugsource-032-3.8.i686 [ 32s] Provides: dracut-debugsource = 032-3.8 dracut-debugsource(x86-32) = 032-3.8 [ 32s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 32s] Processing files: dracut-network-032-3.8.i686 [ 32s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 32s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 32s] [ 32s] Provides: dracut-network = 032-3.8 dracut-network(x86-32) = 032-3.8 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires: /bin/bash /bin/sh [ 32s] Processing files: dracut-caps-032-3.8.i686 [ 32s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 32s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 32s] [ 32s] Provides: dracut-caps = 032-3.8 dracut-caps(x86-32) = 032-3.8 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires: /bin/bash [ 32s] Processing files: dracut-tools-032-3.8.i686 [ 32s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 32s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 32s] [ 32s] Provides: dracut-tools = 032-3.8 dracut-tools(x86-32) = 032-3.8 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires: /bin/bash [ 32s] Processing files: dracut-debuginfo-032-3.8.i686 [ 32s] Provides: dracut-debuginfo = 032-3.8 dracut-debuginfo(x86-32) = 032-3.8 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 [ 32s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-3.8.src.rpm [ 32s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-032-3.8.i686.rpm [ 32s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-3.8.i686.rpm [ 32s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-3.8.i686.rpm [ 32s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-3.8.i686.rpm [ 32s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-3.8.i686.rpm [ 32s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-3.8.i686.rpm [ 32s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.kyma58 [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd dracut-032 [ 32s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.i386 [ 32s] + exit 0 [ 32s] ... checking for files with abuild user/group [ 32s] ... creating baselibs [ 33s] ... comparing built packages with the former built [ 33s] /usr/lib/build/pkg-diff.sh [ 33s] compare /.build.oldpackages/dracut-032-3.7.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-3.8.src.rpm [ 33s] This is not a prerelease project. Compare the project name. [ 33s] comparing rpmtags [ 33s] comparing RELEASE [ 33s] comparing PROVIDES [ 33s] comparing scripts [ 33s] comparing filelist [ 33s] comparing file checksum [ 33s] RPM meta information is identical [ 33s] compare /.build.oldpackages/dracut-032-3.7.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-032-3.8.i686.rpm [ 33s] Comparing dracut-032-3.7.i686.rpm to dracut-032-3.8.i686.rpm [ 33s] This is not a prerelease project. Compare the project name. [ 33s] comparing rpmtags [ 33s] comparing RELEASE [ 33s] comparing PROVIDES [ 33s] comparing scripts [ 33s] comparing filelist [ 33s] comparing file checksum [ 33s] creating rename script [ 33s] RPM file checksum differs. [ 33s] Extracting packages [ 33s] /usr/lib/dracut/dracut-version.sh differs (ASCII text) [ 33s] --- old//usr/lib/dracut/dracut-version.sh 2017-05-12 19:18:59.000000000 +0000 [ 33s] +++ new//usr/lib/dracut/dracut-version.sh 2017-05-19 22:04:23.000000000 +0000 [ 33s] @@ -1 +1 @@ [ 33s] -DRACUT_VERSION=032-3.7 [ 33s] +DRACUT_VERSION=032-3.8 [ 33s] compare /.build.oldpackages/dracut-caps-032-3.7.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-3.8.i686.rpm [ 33s] Comparing dracut-caps-032-3.7.i686.rpm to dracut-caps-032-3.8.i686.rpm [ 33s] This is not a prerelease project. Compare the project name. [ 33s] comparing rpmtags [ 33s] comparing RELEASE [ 33s] comparing PROVIDES [ 33s] comparing scripts [ 33s] comparing filelist [ 33s] comparing file checksum [ 33s] creating rename script [ 33s] RPM meta information is identical [ 33s] compare /.build.oldpackages/dracut-debuginfo-032-3.7.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-3.8.i686.rpm [ 33s] skipping -debuginfo package [ 33s] compare /.build.oldpackages/dracut-debugsource-032-3.7.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-3.8.i686.rpm [ 33s] Comparing dracut-debugsource-032-3.7.i686.rpm to dracut-debugsource-032-3.8.i686.rpm [ 33s] This is not a prerelease project. Compare the project name. [ 33s] comparing rpmtags [ 33s] comparing RELEASE [ 34s] comparing PROVIDES [ 34s] comparing scripts [ 34s] comparing filelist [ 34s] comparing file checksum [ 34s] creating rename script [ 34s] RPM meta information is identical [ 34s] compare /.build.oldpackages/dracut-network-032-3.7.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-3.8.i686.rpm [ 34s] Comparing dracut-network-032-3.7.i686.rpm to dracut-network-032-3.8.i686.rpm [ 34s] This is not a prerelease project. Compare the project name. [ 34s] comparing rpmtags [ 34s] comparing RELEASE [ 34s] comparing PROVIDES [ 34s] comparing scripts [ 34s] comparing filelist [ 34s] comparing file checksum [ 34s] creating rename script [ 34s] RPM meta information is identical [ 34s] compare /.build.oldpackages/dracut-tools-032-3.7.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-3.8.i686.rpm [ 34s] Comparing dracut-tools-032-3.7.i686.rpm to dracut-tools-032-3.8.i686.rpm [ 34s] This is not a prerelease project. Compare the project name. [ 34s] comparing rpmtags [ 34s] comparing RELEASE [ 34s] comparing PROVIDES [ 34s] comparing scripts [ 34s] comparing filelist [ 34s] comparing file checksum [ 34s] creating rename script [ 34s] RPM file checksum differs. [ 34s] Extracting packages [ 34s] Package content is identical [ 34s] [ 34s] obsnw08 finished "build dracut.spec" at Fri May 19 22:04:27 UTC 2017. [ 34s]