[    0s] Memory limit set to 82442244KB
[    0s] Using BUILD_ROOT=/var/cache/build/root_3
[    0s] Using BUILD_ARCH=i586:i486:i386
[    0s] 
[    0s] 
[    0s] obsnw20 started "build _service:gbs:liboauth.spec" at Sat Apr 29 05:24:26 UTC 2017.
[    0s] 
[    0s] Building liboauth for project 'Tizen:Unified' repository 'emulator' arch 'i586' srcmd5 'aed123c4e8c31b651490132a87cb6b8c'
[    0s] 
[    0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:liboauth.spec ...
[    0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:liboauth.spec
[    0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:liboauth.spec build rpmlint-Factory ...
[    1s] copying qemu
[    1s]  /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh
[    1s] 
[    1s] cycle: libsoftokn3 -> nss
[    1s]   breaking dependency nss -> libsoftokn3
[    1s] [1/35] preinstalling libmagic-data...
[    1s] [2/35] preinstalling setup...
[    1s] [3/35] preinstalling filesystem...
[    1s] [4/35] preinstalling glibc...
[    2s] [5/35] preinstalling bash...
[    2s] [6/35] preinstalling diffutils...
[    2s] [7/35] preinstalling grep...
[    2s] [8/35] preinstalling libattr...
[    2s] [9/35] preinstalling libbz2...
[    2s] [10/35] preinstalling libcap...
[    2s] [11/35] preinstalling libelf...
[    2s] [12/35] preinstalling libfreebl3...
[    2s] [13/35] preinstalling libgcc...
[    2s] [14/35] preinstalling liblua...
[    2s] [15/35] preinstalling liblzma...
[    2s] [16/35] preinstalling libncurses...
[    2s] [17/35] preinstalling libpopt...
[    2s] [18/35] preinstalling libsmack...
[    2s] [19/35] preinstalling libsqlite...
[    2s] [20/35] preinstalling nspr...
[    2s] [21/35] preinstalling sed...
[    2s] [22/35] preinstalling zlib...
[    2s] [23/35] preinstalling coreutils...
[    2s] [24/35] preinstalling libacl...
[    3s] [25/35] preinstalling libreadline...
[    3s] [26/35] preinstalling smack...
[    3s] [27/35] preinstalling bzip2...
[    3s] [28/35] preinstalling libmagic...
[    3s] [29/35] preinstalling libxml2...
[    3s] [30/35] preinstalling tar...
[    3s] [31/35] preinstalling util-linux...
[    3s] [32/35] preinstalling util-linux-su...
[    3s] [33/35] preinstalling nss...
[    3s] [34/35] preinstalling libsoftokn3...
[    3s] [35/35] preinstalling rpm...
[    3s] 
[    3s] running setup postinstall script
[    3s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name'
[    3s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do'
[    3s] initializing rpm db...
[    4s] reordering...cycle: gio-branding-upstream -> libgio
[    4s]   breaking dependency libgio -> gio-branding-upstream
[    4s] cycle: libsoftokn3 -> nss
[    4s]   breaking dependency nss -> libsoftokn3
[    4s] done
[    4s] [1/135] installing libmagic-data-5.28-3.20
[    4s] [2/135] installing setup-0.9-3.18
[    4s] [3/135] installing terminfo-base-5.9-3.22
[    4s] [4/135] installing filesystem-3.1-3.2
[    4s] [5/135] installing glibc-2.24-3.10
[    4s] [6/135] installing bash-3.2.57-4.1
[    5s] [7/135] installing binutils-2.27-4.17
[    5s] [8/135] installing cpio-2.11-3.3
[    5s] [9/135] installing diffutils-3.3-3.1
[    5s] [10/135] installing findutils-4.3.8-3.23
[    5s] [11/135] installing hostname-3.12-4.1
[    5s] [12/135] installing libatomic-6.2.1-4.2
[    5s] [13/135] installing libattr-2.4.47-3.20
[    5s] [14/135] installing libbz2-1.0.6-4.20
[    5s] [15/135] installing libcap-2.24-3.17
[    6s] [16/135] installing libcares-1.10.0-3.1
[    6s] [17/135] installing libelf-0.153-3.12
[    6s] [18/135] installing libelf0-0.8.13-3.1
[    6s] [19/135] installing libext2fs-1.42.13-3.3
[    6s] [20/135] installing libffi-3.1-3.1
[    6s] [21/135] installing libfreebl3-3.23-3.17
[    6s] [22/135] installing libgcc-6.2.1-4.2
[    6s] [23/135] installing libgmp-4.2.1-3.8
[    6s] [24/135] installing libgomp-6.2.1-4.2
[    6s] [25/135] installing libidn-1.15-3.2
[    6s] [26/135] installing libitm-6.2.1-4.2
[    6s] [27/135] installing libltdl-2.4.2-4.21
[    6s] [28/135] installing liblua-5.1.4-3.5
[    6s] [29/135] installing liblzma-5.2.2-3.20
[    7s] [30/135] installing libnettle-2.7.1-2.4
[    7s] [31/135] installing libpcre-8.39-3.4
[    7s] [32/135] installing libpopt-1.16-4.5
[    7s] [33/135] installing libpython-2.7.8-3.22
[    7s] [34/135] installing libsmack-1.3.0-3.20
[    7s] [35/135] installing libsmartcols-2.28-3.1
[    7s] [36/135] installing libsqlite-3.14.2-4.2
[    7s] [37/135] installing libtasn1-4.8-2.2
[    7s] [38/135] installing libuuid-2.28-3.1
[    7s] [39/135] installing m4-1.4.17-3.1
[    7s] [40/135] installing net-tools-2.0_20121208git-3.1
[    8s] [41/135] installing nghttp2-1.20.0-3.3
[    8s] [42/135] installing nspr-4.12-3.5
[    8s] [43/135] installing patch-2.7-3.5
[    8s] [44/135] installing pkg-config-0.28-4.21
[    8s] [45/135] installing sed-4.1c-3.1
[    8s] [46/135] installing update-alternatives-1.18.15-3.1
[    8s] [47/135] installing which-2.20-6.1
[    8s] [48/135] installing zlib-1.2.8-3.23
[    8s] [49/135] installing libncurses-5.9-3.22
[    8s] [50/135] installing libncurses6-5.9-3.22
[    8s] [51/135] installing build-compare-2015.04.28-3.17
[    8s] [52/135] installing coreutils-6.9-3.1
[    8s] [53/135] installing cpp-6.2.1-4.2
[    9s] [54/135] installing gawk-3.1.5-3.1
[    9s] [55/135] installing gcc-c++-6.2.1-4.2
[   10s] [56/135] installing grep-2.5.2-3.1
[   10s] [57/135] installing less-466-8.1
[   10s] [58/135] installing libacl-2.2.52-3.26
[   11s] [59/135] installing libasm-0.153-3.12
[   11s] [60/135] installing libblkid-2.28-3.1
[   11s] [61/135] installing libglib-2.44.1-1.3
[   11s] [62/135] installing libopenssl-1.0.2j-3.20
[   11s] [63/135] installing libpcreposix-8.39-3.4
[   11s] [64/135] installing libreadline-5.2-3.19
[   11s] [65/135] installing libstdc++-6.2.1-4.2
[   11s] [66/135] installing libtasn1-devel-4.8-2.2
[   11s] [67/135] installing make-4.0-3.4
[   11s] [68/135] installing nss-certs-3.23-3.17
[   11s] [69/135] installing procps-ng-3.3.9-3.2
[   12s] [70/135] installing smack-1.3.0-3.20
[   12s] [71/135] installing xz-devel-5.2.2-3.20
[   12s] [72/135] installing bzip2-1.0.6-4.20
[   12s] [73/135] installing libhogweed-2.7.1-2.4
[   12s] [74/135] installing libmagic-5.28-3.20
[   12s] [75/135] installing libxml2-2.9.4-4.19
[   12s] [76/135] installing nspr-devel-4.12-3.5
[   12s] [77/135] installing xz-5.2.2-3.20
[   12s] [78/135] installing libdw-0.153-3.12
[   12s] [79/135] installing ncurses-devel-5.9-3.22
[   13s] [80/135] installing libstdc++-devel-6.2.1-4.2
[   13s] [81/135] installing file-5.28-3.20
[   13s] [82/135] installing libgmodule-2.44.1-1.3
[   13s] [83/135] installing libgthread-2.44.1-1.3
[   13s] [84/135] installing libmount-2.28-3.1
[   13s] [85/135] installing linux-glibc-devel-3.10-3.23
[   13s] [86/135] installing openssl-1.0.2j-3.20
[   14s] [87/135] installing readline-devel-5.2-3.19
[   14s] [88/135] installing tar-1.17-3.1
[   14s] [89/135] installing db4-4.8.30.NC-3.24
[   14s] [90/135] installing glibc-locale-2.24-3.10
[   14s] [91/135] installing gzip-1.3.12-3.17
[   14s] [92/135] installing libcc1-6.2.1-4.2
[   14s] [93/135] installing libcilkrts-6.2.1-4.2
[   14s] [94/135] installing libfdisk1-2.28-3.1
[   15s] [95/135] installing libgobject-2.44.1-1.3
[   15s] [96/135] installing libubsan-6.2.1-4.2
[   15s] [97/135] installing libxml2-tools-2.9.4-4.19
[   15s] [98/135] installing pam-1.1.6-3.2
[   15s] [99/135] installing libgmpxx-4.2.1-3.8
[   15s] [100/135] installing libpcrecpp-8.39-3.4
[   15s] [101/135] installing tzdata-2016i-4.1
[   15s] [102/135] installing libcurl-7.53.1-1.2
[   15s] [103/135] installing elfutils-0.153-3.12
[   15s] [104/135] installing libgnutls-3.3.5-3.2
[   16s] [105/135] installing shared-mime-info-1.3-2.1
[   18s] [106/135] installing glibc-devel-2.24-3.10
[   18s] [107/135] installing gmp-devel-4.2.1-3.8
[   18s] [108/135] installing perl-5.20.0-3.91
[   20s] [109/135] installing pcre-devel-8.39-3.4
[   20s] [110/135] installing gcc-6.2.1-4.2
[   21s] [111/135] installing python-2.7.8-3.22
[   22s] [112/135] installing util-linux-2.28-3.1
[   22s] [113/135] installing build-mkbaselibs-20120927-3.1
[   22s] [114/135] installing autoconf-2.69-3.26
[   22s] [115/135] installing libidn-devel-1.15-3.2
[   22s] [116/135] installing python-xml-2.7.8-3.22
[   22s] [117/135] installing util-linux-su-2.28-3.1
[   22s] [118/135] installing zlib-devel-1.2.8-3.23
[   22s] [119/135] installing libnettle-devel-2.7.1-2.4
[   22s] [120/135] installing automake-1.14.1-3.21
[   22s] [121/135] installing libcurl-devel-7.53.1-1.2
[   23s] [122/135] installing libopenssl-devel-1.0.2j-3.20
[   23s] [123/135] installing build-20120927-3.1
[   23s] [124/135] installing libgnutls-devel-3.3.5-3.2
[   23s] [125/135] installing libxml2-devel-2.9.4-4.19
[   23s] [126/135] installing libtool-2.4.2-4.21
[   23s] [127/135] installing nss-3.23-3.17
[   23s] [128/135] installing libgio-2.44.1-1.3
[   23s] [129/135] installing gio-branding-upstream-2.44.1-1.3
[   23s] [130/135] installing libsoftokn3-3.23-3.17
[   23s] [131/135] installing glib2-tools-2.44.1-1.3
[   24s] [132/135] installing rpm-4.11.0.1-4.7
[   24s] [133/135] installing nss-devel-3.23-3.17
[   24s] [134/135] installing glib2-devel-2.44.1-1.3
[   24s] [135/135] installing rpm-build-4.11.0.1-4.7
[   24s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf...
[   24s] now finalizing build dir...
[   25s] build target is i686-tizen-linux
[   25s] -----------------------------------------------------------------
[   25s] I have the following modifications for liboauth.spec:
[   25s] 5c5
[   25s] < Release:    1
[   25s] ---
[   25s] > Release:    2.3
[   25s] 57a58
[   25s] > %changelog
[   25s] -----------------------------------------------------------------
[   25s] ----- building liboauth.spec (user abuild)
[   25s] -----------------------------------------------------------------
[   25s] -----------------------------------------------------------------
[   25s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/emulator/aed123c4e8c31b651490132a87cb6b8c-liboauth' -ba /home/abuild/rpmbuild/SOURCES/liboauth.spec
[   25s] Building target platforms: i686-tizen-linux
[   25s] Building for target i686-tizen-linux
[   25s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.FK9egn
[   25s] + umask 022
[   25s] + cd /home/abuild/rpmbuild/BUILD
[   25s] + cd /home/abuild/rpmbuild/BUILD
[   25s] + rm -rf liboauth-1.0.3
[   25s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/liboauth-1.0.3.tar.gz
[   25s] + /bin/tar -xf -
[   25s] + STATUS=0
[   25s] + '[' 0 -ne 0 ']'
[   25s] + cd liboauth-1.0.3
[   25s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[   25s] + exit 0
[   25s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.rdvpP8
[   25s] + umask 022
[   25s] + cd /home/abuild/rpmbuild/BUILD
[   25s] + cd liboauth-1.0.3
[   25s] ++ uname -m
[   25s] + [[ i686 == \a\a\r\c\h\6\4 ]]
[   25s] + LANG=C
[   25s] + export LANG
[   25s] + unset DISPLAY
[   25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g'
[   25s] + export CFLAGS
[   25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu++11'
[   25s] + export CXXFLAGS
[   25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir'
[   25s] + export FFLAGS
[   25s] + LDFLAGS=
[   25s] + export LDFLAGS
[   25s] + LD_AS_NEEDED=1
[   25s] + export LD_AS_NEEDED
[   25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g'
[   25s] + export CFLAGS
[   25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu++11'
[   25s] + export CXXFLAGS
[   25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir'
[   25s] + export FFLAGS
[   25s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static
[   25s] checking for sed... /bin/sed
[   25s] checking liboauth version... 1.0.3
[   25s] checking build system type... i686-tizen-linux-gnu
[   25s] checking host system type... i686-tizen-linux-gnu
[   25s] checking target system type... i686-tizen-linux-gnu
[   25s] checking for a BSD-compatible install... /bin/install -c
[   26s] checking whether build environment is sane... yes
[   26s] checking for a thread-safe mkdir -p... /bin/mkdir -p
[   26s] checking for gawk... gawk
[   26s] checking whether make sets $(MAKE)... yes
[   26s] checking for i686-tizen-linux-gnu-gcc... no
[   26s] checking for gcc... gcc
[   26s] checking whether the C compiler works... yes
[   26s] checking for C compiler default output file name... a.out
[   26s] checking for suffix of executables... 
[   26s] checking whether we are cross compiling... no
[   26s] checking for suffix of object files... o
[   26s] checking whether we are using the GNU C compiler... yes
[   27s] checking whether gcc accepts -g... yes
[   27s] checking for gcc option to accept ISO C89... none needed
[   27s] checking for style of include used by make... GNU
[   27s] checking dependency style of gcc... gcc3
[   27s] checking whether make sets $(MAKE)... (cached) yes
[   27s] checking whether ln -s works... yes
[   27s] checking how to print strings... printf
[   27s] checking for a sed that does not truncate output... (cached) /bin/sed
[   27s] checking for grep that handles long lines and -e... /bin/grep
[   27s] checking for egrep... /bin/grep -E
[   27s] checking for fgrep... /bin/grep -F
[   27s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld
[   27s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes
[   27s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B
[   27s] checking the name lister (/bin/nm -B) interface... BSD nm
[   27s] checking the maximum length of command line arguments... 1572864
[   27s] checking whether the shell understands some XSI constructs... yes
[   27s] checking whether the shell understands "+="... yes
[   27s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop
[   27s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop
[   27s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r
[   27s] checking for i686-tizen-linux-gnu-objdump... no
[   27s] checking for objdump... objdump
[   27s] checking how to recognize dependent libraries... pass_all
[   27s] checking for i686-tizen-linux-gnu-dlltool... no
[   27s] checking for dlltool... no
[   27s] checking how to associate runtime and link libraries... printf %s\n
[   27s] checking for i686-tizen-linux-gnu-ar... no
[   27s] checking for ar... ar
[   27s] checking for archiver @FILE support... @
[   27s] checking for i686-tizen-linux-gnu-strip... no
[   27s] checking for strip... strip
[   27s] checking for i686-tizen-linux-gnu-ranlib... no
[   27s] checking for ranlib... ranlib
[   27s] checking command to parse /bin/nm -B output from gcc object... ok
[   27s] checking for sysroot... no
[   27s] checking for i686-tizen-linux-gnu-mt... no
[   27s] checking for mt... no
[   27s] checking if : is a manifest tool... no
[   27s] checking how to run the C preprocessor... gcc -E
[   27s] checking for ANSI C header files... yes
[   27s] checking for sys/types.h... yes
[   27s] checking for sys/stat.h... yes
[   27s] checking for stdlib.h... yes
[   27s] checking for string.h... yes
[   27s] checking for memory.h... yes
[   27s] checking for strings.h... yes
[   27s] checking for inttypes.h... yes
[   27s] checking for stdint.h... yes
[   27s] checking for unistd.h... yes
[   27s] checking for dlfcn.h... yes
[   27s] checking for objdir... .libs
[   27s] checking if gcc supports -fno-rtti -fno-exceptions... no
[   27s] checking for gcc option to produce PIC... -fPIC -DPIC
[   27s] checking if gcc PIC flag -fPIC -DPIC works... yes
[   27s] checking if gcc static flag -static works... no
[   27s] checking if gcc supports -c -o file.o... yes
[   27s] checking if gcc supports -c -o file.o... (cached) yes
[   27s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes
[   27s] checking whether -lc should be explicitly linked in... no
[   27s] checking dynamic linker characteristics... GNU/Linux ld.so
[   27s] checking how to hardcode library paths into programs... immediate
[   27s] checking whether stripping libraries is possible... yes
[   27s] checking if libtool supports shared libraries... yes
[   27s] checking whether to build shared libraries... yes
[   27s] checking whether to build static libraries... no
[   28s] checking whether gcc and cc understand -c and -o together... yes
[   28s] checking for ANSI C header files... (cached) yes
[   28s] checking for unistd.h... (cached) yes
[   28s] checking time.h usability... yes
[   28s] checking time.h presence... yes
[   28s] checking for time.h... yes
[   28s] checking for string.h... (cached) yes
[   28s] checking alloca.h usability... yes
[   28s] checking alloca.h presence... yes
[   28s] checking for alloca.h... yes
[   28s] checking stdio.h usability... yes
[   28s] checking stdio.h presence... yes
[   28s] checking for stdio.h... yes
[   28s] checking stdarg.h usability... yes
[   28s] checking stdarg.h presence... yes
[   28s] checking for stdarg.h... yes
[   28s] checking math.h usability... yes
[   28s] checking math.h presence... yes
[   28s] checking for math.h... yes
[   28s] checking whether sys/types.h defines makedev... yes
[   28s] checking for size_t... yes
[   28s] checking for working alloca.h... yes
[   28s] checking for alloca... yes
[   28s] checking whether struct tm is in sys/time.h or time.h... time.h
[   28s] checking for struct stat.st_blocks... yes
[   28s] checking for dirent.h that defines DIR... yes
[   28s] checking for library containing opendir... none required
[   29s] checking whether closedir returns void... no
[   29s] checking if -Wl,--as-needed works... yes
[   29s] checking for curl... no
[   29s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config
[   29s] checking pkg-config is at least version 0.9.0... yes
[   29s] checking for CURL... yes
[   29s] checking openssl/hmac.h usability... yes
[   29s] checking openssl/hmac.h presence... yes
[   29s] checking for openssl/hmac.h... yes
[   29s] configure:
[   29s] 
[   29s]     NOTE: OpenSSL is not compatible with GPL applications.
[   29s]     Even if only linked with GPL code you are not allowed to distibute your app.
[   29s]     However liboauth provides an exeption (to the GPL) to circumvent this issue
[   29s]     (see README, src/hash.c). Nevertheless, double-check your licensing.
[   29s] 
[   29s]     liboauth itself is licensed under MIT license and comatible with the GPL.
[   29s] 
[   29s]     Either way, you are probably better off using NSS (configure --enable-nss);
[   29s]     future versions of liboauth will default to the Mozilla NSS.
[   29s] 
[   29s]     see http://people.gnome.org/~markmc/openssl-and-the-gpl.html
[   29s]     
[   29s] checking for doxygen... no
[   29s] checking for dot... no
[   29s] checking for perl... /bin/perl
[   29s] configure: creating ./config.status
[   29s] config.status: creating Makefile
[   29s] config.status: creating src/Makefile
[   29s] config.status: creating doc/Makefile
[   29s] config.status: creating tests/Makefile
[   29s] config.status: creating liboauth.lsm
[   29s] config.status: creating oauth.pc
[   29s] config.status: creating Doxyfile
[   29s] config.status: creating doc/mainpage.dox
[   29s] config.status: creating src/config.h
[   29s] config.status: executing tests/atconfig commands
[   29s] config.status: executing depfiles commands
[   29s] config.status: executing libtool commands
[   30s] configure:
[   30s] 
[   30s]  liboauth configured:
[   30s]  -----------------------
[   30s] 
[   30s]   version:                1.0.3
[   30s]   interface revision:     8:7:8
[   30s]   hash/signature:         OpenSSL
[   30s]   http integration:       libcurl
[   30s]   libcurl-timeout:        -
[   30s]   generate documentation: no
[   30s]   installation prefix:    /usr
[   30s]   CFLAGS:                 -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g
[   30s]   LDFLAGS:                -Wall -export-symbols-regex '^oauth_.*' -Wl,--as-needed 
[   30s] 
[   30s]  type "make" followed my "make install" as root.
[   30s]  
[   30s] 
[   30s] + make -j4
[   30s] Making all in src
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] make  all-am
[   30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] /bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall   -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-oauth.lo -MD -MP -MF .deps/liboauth_la-oauth.Tpo -c -o liboauth_la-oauth.lo `test -f 'oauth.c' || echo './'`oauth.c
[   30s] /bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall   -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-hash.lo -MD -MP -MF .deps/liboauth_la-hash.Tpo -c -o liboauth_la-hash.lo `test -f 'hash.c' || echo './'`hash.c
[   30s] /bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall   -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-xmalloc.lo -MD -MP -MF .deps/liboauth_la-xmalloc.Tpo -c -o liboauth_la-xmalloc.lo `test -f 'xmalloc.c' || echo './'`xmalloc.c
[   30s] /bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I.    -Wall   -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-oauth_http.lo -MD -MP -MF .deps/liboauth_la-oauth_http.Tpo -c -o liboauth_la-oauth_http.lo `test -f 'oauth_http.c' || echo './'`oauth_http.c
[   30s] libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-oauth.lo -MD -MP -MF .deps/liboauth_la-oauth.Tpo -c oauth.c  -fPIC -DPIC -o .libs/liboauth_la-oauth.o
[   30s] libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-hash.lo -MD -MP -MF .deps/liboauth_la-hash.Tpo -c hash.c  -fPIC -DPIC -o .libs/liboauth_la-hash.o
[   30s] libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-oauth_http.lo -MD -MP -MF .deps/liboauth_la-oauth_http.Tpo -c oauth_http.c  -fPIC -DPIC -o .libs/liboauth_la-oauth_http.o
[   30s] libtool: compile:  gcc -DHAVE_CONFIG_H -I. -Wall -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -MT liboauth_la-xmalloc.lo -MD -MP -MF .deps/liboauth_la-xmalloc.Tpo -c xmalloc.c  -fPIC -DPIC -o .libs/liboauth_la-xmalloc.o
[   30s] mv -f .deps/liboauth_la-xmalloc.Tpo .deps/liboauth_la-xmalloc.Plo
[   30s] mv -f .deps/liboauth_la-hash.Tpo .deps/liboauth_la-hash.Plo
[   30s] mv -f .deps/liboauth_la-oauth.Tpo .deps/liboauth_la-oauth.Plo
[   30s] mv -f .deps/liboauth_la-oauth_http.Tpo .deps/liboauth_la-oauth_http.Plo
[   30s] /bin/sh ../libtool --tag=CC   --mode=link gcc -Wall   -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wall -export-symbols-regex '^oauth_.*' -Wl,--as-needed -version-info 8:7:8  -o liboauth.la -rpath /usr/lib liboauth_la-oauth.lo liboauth_la-hash.lo liboauth_la-xmalloc.lo liboauth_la-oauth_http.lo -lcrypto -lcurl  
[   30s] libtool: link: /bin/nm -B  .libs/liboauth_la-oauth.o .libs/liboauth_la-hash.o .libs/liboauth_la-xmalloc.o .libs/liboauth_la-oauth_http.o   | sed -n -e 's/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' | /bin/sed 's/.* //' | sort | uniq > .libs/liboauth.exp
[   30s] libtool: link: /bin/grep -E -e "^oauth_.*" ".libs/liboauth.exp" > ".libs/liboauth.expT"
[   30s] libtool: link: mv -f ".libs/liboauth.expT" ".libs/liboauth.exp"
[   30s] libtool: link: echo "{ global:" > .libs/liboauth.ver
[   30s] libtool: link:  cat .libs/liboauth.exp | sed -e "s/\(.*\)/\1;/" >> .libs/liboauth.ver
[   30s] libtool: link:  echo "local: *; };" >> .libs/liboauth.ver
[   30s] libtool: link:  gcc -shared  -fPIC -DPIC  .libs/liboauth_la-oauth.o .libs/liboauth_la-hash.o .libs/liboauth_la-xmalloc.o .libs/liboauth_la-oauth_http.o   -lcrypto -lcurl  -O2 -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -Wl,--as-needed   -Wl,-soname -Wl,liboauth.so.0 -Wl,-version-script -Wl,.libs/liboauth.ver -o .libs/liboauth.so.0.8.7
[   30s] libtool: link: (cd ".libs" && rm -f "liboauth.so.0" && ln -s "liboauth.so.0.8.7" "liboauth.so.0")
[   30s] libtool: link: (cd ".libs" && rm -f "liboauth.so" && ln -s "liboauth.so.0.8.7" "liboauth.so")
[   30s] libtool: link: ( cd ".libs" && rm -f "liboauth.la" && ln -s "../liboauth.la" "liboauth.la" )
[   30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] Making all in doc
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc'
[   30s] make[1]: Nothing to be done for 'all'.
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc'
[   30s] Making all in tests
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests'
[   30s] make[1]: Nothing to be done for 'all'.
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests'
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3'
[   30s] make[1]: Nothing to be done for 'all-am'.
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3'
[   30s] + exit 0
[   30s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.9GVjZa
[   30s] + umask 022
[   30s] + cd /home/abuild/rpmbuild/BUILD
[   30s] + cd liboauth-1.0.3
[   30s] + LANG=C
[   30s] + export LANG
[   30s] + unset DISPLAY
[   30s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386
[   30s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386
[   30s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386
[   30s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386 install
[   30s] Making install in src
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib"
[   30s]  /bin/sh ../libtool   --mode=install /bin/install -c   liboauth.la '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib'
[   30s] libtool: install: /bin/install -c .libs/liboauth.so.0.8.7 /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib/liboauth.so.0.8.7
[   30s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib && { ln -s -f liboauth.so.0.8.7 liboauth.so.0 || { rm -f liboauth.so.0 && ln -s liboauth.so.0.8.7 liboauth.so.0; }; })
[   30s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib && { ln -s -f liboauth.so.0.8.7 liboauth.so || { rm -f liboauth.so && ln -s liboauth.so.0.8.7 liboauth.so; }; })
[   30s] libtool: install: /bin/install -c .libs/liboauth.lai /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib/liboauth.la
[   30s] libtool: install: warning: remember to run `libtool --finish /usr/lib'
[   30s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/include"
[   30s]  /bin/install -c -m 644 oauth.h '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/include'
[   30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/src'
[   30s] Making install in doc
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc'
[   30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc'
[   30s] make[2]: Nothing to be done for 'install-exec-am'.
[   30s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/share/man/man3"
[   30s]  /bin/install -c -m 644 oauth.3 '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/share/man/man3'
[   30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc'
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/doc'
[   30s] Making install in tests
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests'
[   30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests'
[   30s] make[2]: Nothing to be done for 'install-exec-am'.
[   30s] make[2]: Nothing to be done for 'install-data-am'.
[   30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests'
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3/tests'
[   30s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3'
[   30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3'
[   30s] make[2]: Nothing to be done for 'install-exec-am'.
[   30s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib/pkgconfig"
[   30s]  /bin/install -c -m 644 oauth.pc '/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib/pkgconfig'
[   30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3'
[   30s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/liboauth-1.0.3'
[   30s] + rm -f /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/share/info/dir
[   30s] + find /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386 -regex '.*\.la$'
[   30s] + xargs rm -f --
[   30s] + find /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386 -regex '.*\.a$'
[   30s] + xargs rm -f --
[   30s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/liboauth-1.0.3
[   30s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/lib/liboauth.so.0.8.7
[   30s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory
[   30s] cpio: glibc-2.24/sysdeps/i386/crti.S: Cannot stat: No such file or directory
[   30s] cpio: glibc-2.24/sysdeps/i386/crtn.S: Cannot stat: No such file or directory
[   30s] 189 blocks
[   30s] + /usr/lib/rpm/check-buildroot
[   30s] + /usr/lib/rpm//brp-compress
[   30s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[   30s] + /usr/lib/rpm/brp-python-hardlink
[   30s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386
[   30s] Processing files: liboauth-1.0.3-2.3.i686
[   30s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.AP8Wae
[   30s] + umask 022
[   30s] + cd /home/abuild/rpmbuild/BUILD
[   30s] + cd liboauth-1.0.3
[   30s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/share/licenses/liboauth
[   30s] + export LICENSEDIR
[   30s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/share/licenses/liboauth
[   30s] + cp -pr COPYING.MIT /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386/usr/share/licenses/liboauth
[   30s] + exit 0
[   31s] Provides: liboauth = 1.0.3-2.3 liboauth(x86-32) = 1.0.3-2.3 liboauth.so.0
[   31s] Requires(interp): /sbin/ldconfig /sbin/ldconfig
[   31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   31s] Requires(post): /sbin/ldconfig
[   31s] Requires(postun): /sbin/ldconfig
[   31s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4)
[   31s] Processing files: liboauth-debugsource-1.0.3-2.3.i686
[   31s] Provides: liboauth-debugsource = 1.0.3-2.3 liboauth-debugsource(x86-32) = 1.0.3-2.3
[   31s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1
[   31s] Processing files: liboauth-devel-1.0.3-2.3.i686
[   31s] Provides: liboauth-devel = 1.0.3-2.3 liboauth-devel(x86-32) = 1.0.3-2.3 pkgconfig(oauth) = 1.0.3
[   31s] Requires(interp): /sbin/ldconfig /sbin/ldconfig
[   31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   31s] Requires(post): /sbin/ldconfig
[   31s] Requires(postun): /sbin/ldconfig
[   31s] Requires: /usr/bin/pkg-config liboauth.so.0 pkgconfig(libcrypto) pkgconfig(libcurl)
[   31s] Processing files: liboauth-debuginfo-1.0.3-2.3.i686
[   31s] Provides: liboauth-debuginfo = 1.0.3-2.3 liboauth-debuginfo(x86-32) = 1.0.3-2.3
[   31s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   31s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386
[   31s] Wrote: /home/abuild/rpmbuild/SRPMS/liboauth-1.0.3-2.3.src.rpm
[   31s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/liboauth-1.0.3-2.3.i686.rpm
[   31s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/liboauth-debugsource-1.0.3-2.3.i686.rpm
[   31s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/liboauth-devel-1.0.3-2.3.i686.rpm
[   31s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/liboauth-debuginfo-1.0.3-2.3.i686.rpm
[   31s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ngcZDA
[   31s] + umask 022
[   31s] + cd /home/abuild/rpmbuild/BUILD
[   31s] + cd liboauth-1.0.3
[   31s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/liboauth-1.0.3-2.3.i386
[   31s] + exit 0
[   31s] ... checking for files with abuild user/group
[   31s] ... creating baselibs
[   31s] ... comparing built packages with the former built
[   31s] /usr/lib/build/pkg-diff.sh
[   31s] compare /.build.oldpackages/liboauth-1.0.3-2.2.src.rpm /home/abuild/rpmbuild/SRPMS/liboauth-1.0.3-2.3.src.rpm
[   31s] This is not a prerelease project. Compare the project name.
[   31s] comparing rpmtags
[   31s] comparing RELEASE
[   31s] comparing PROVIDES
[   31s] comparing scripts
[   31s] comparing filelist
[   31s] comparing file checksum
[   31s] RPM meta information is identical
[   31s] compare /.build.oldpackages/liboauth-1.0.3-2.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/liboauth-1.0.3-2.3.i686.rpm
[   32s] Comparing liboauth-1.0.3-2.2.i686.rpm to liboauth-1.0.3-2.3.i686.rpm
[   32s] This is not a prerelease project. Compare the project name.
[   32s] comparing rpmtags
[   32s] comparing RELEASE
[   32s] comparing PROVIDES
[   32s] comparing scripts
[   32s] comparing filelist
[   32s] comparing file checksum
[   32s] creating rename script
[   32s] RPM meta information is identical
[   32s] compare /.build.oldpackages/liboauth-debuginfo-1.0.3-2.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/liboauth-debuginfo-1.0.3-2.3.i686.rpm
[   32s] skipping -debuginfo package
[   32s] compare /.build.oldpackages/liboauth-debugsource-1.0.3-2.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/liboauth-debugsource-1.0.3-2.3.i686.rpm
[   32s] Comparing liboauth-debugsource-1.0.3-2.2.i686.rpm to liboauth-debugsource-1.0.3-2.3.i686.rpm
[   32s] This is not a prerelease project. Compare the project name.
[   32s] comparing rpmtags
[   32s] comparing RELEASE
[   32s] comparing PROVIDES
[   32s] comparing scripts
[   32s] comparing filelist
[   32s] comparing file checksum
[   32s] creating rename script
[   33s] RPM meta information is identical
[   33s] compare /.build.oldpackages/liboauth-devel-1.0.3-2.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/liboauth-devel-1.0.3-2.3.i686.rpm
[   33s] Comparing liboauth-devel-1.0.3-2.2.i686.rpm to liboauth-devel-1.0.3-2.3.i686.rpm
[   33s] This is not a prerelease project. Compare the project name.
[   33s] comparing rpmtags
[   33s] comparing RELEASE
[   33s] comparing PROVIDES
[   33s] comparing scripts
[   33s] comparing filelist
[   33s] comparing file checksum
[   33s] creating rename script
[   33s] RPM meta information is identical
[   33s] compare validated built as identical !
[   33s] 
[   33s] obsnw20 finished "build liboauth.spec" at Sat Apr 29 05:24:59 UTC 2017.
[   33s] 

Retried build at Fri May 12 18:39:45 2017 returned same result, skipped
Retried build at Fri May 19 22:00:23 2017 returned same result, skipped