[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_5 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw07 started "build _service:gbs:xmlsec1.spec" at Fri May 19 23:55:57 UTC 2017. [ 0s] [ 0s] Building xmlsec1 for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '9da804ebd87f8ef0f4e5be92f92d1878' [ 0s] [ 0s] processing recipe /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_5/.build.rpmlist /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec build rpmlint-Factory ... [ 0s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/5/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 2s] [8/40] preinstalling libattr... [ 2s] [9/40] preinstalling libbz2... [ 2s] [10/40] preinstalling libcap... [ 2s] [11/40] preinstalling libelf... [ 2s] [12/40] preinstalling libfreebl3... [ 2s] [13/40] preinstalling libgcc... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/110] installing libmagic-data-5.28-4.6 [ 9s] [2/110] installing setup-0.9-3.22 [ 9s] [3/110] installing terminfo-base-5.9-3.33 [ 9s] [4/110] installing filesystem-3.1-3.2 [ 9s] [5/110] installing glibc-2.24-3.19 [ 9s] [6/110] installing bash-3.2.57-4.1 [ 9s] [7/110] installing binutils-2.27-4.27 [ 10s] [8/110] installing cpio-2.11-3.3 [ 10s] [9/110] installing diffutils-3.3-3.1 [ 10s] [10/110] installing fdupes-1.40-3.36 [ 10s] [11/110] installing findutils-4.3.8-3.36 [ 10s] [12/110] installing hostname-3.12-4.1 [ 10s] [13/110] installing libatomic-6.2.1-6.2 [ 10s] [14/110] installing libattr-2.4.47-3.34 [ 10s] [15/110] installing libbz2-1.0.6-4.34 [ 10s] [16/110] installing libcap-2.24-3.31 [ 10s] [17/110] installing libelf-0.153-3.16 [ 10s] [18/110] installing libext2fs-1.42.13-3.3 [ 10s] [19/110] installing libfreebl3-3.23-3.29 [ 11s] [20/110] installing libgcc-6.2.1-6.2 [ 11s] [21/110] installing libgomp-6.2.1-6.2 [ 11s] [22/110] installing libgpg-error-1.13-4.43 [ 11s] [23/110] installing libitm-6.2.1-6.2 [ 11s] [24/110] installing libltdl-2.4.2-4.33 [ 11s] [25/110] installing liblua-5.1.4-3.7 [ 11s] [26/110] installing liblzma-5.2.2-3.33 [ 11s] [27/110] installing libpcre-8.39-3.4 [ 11s] [28/110] installing libpopt-1.16-4.8 [ 11s] [29/110] installing libsmack-1.3.0-3.32 [ 11s] [30/110] installing libsmartcols-2.28-3.1 [ 11s] [31/110] installing libsqlite-3.18.0-5.2 [ 12s] [32/110] installing libuuid-2.28-3.1 [ 12s] [33/110] installing m4-1.4.17-3.1 [ 12s] [34/110] installing net-tools-2.0_20121208git-3.1 [ 12s] [35/110] installing nspr-4.12-3.8 [ 12s] [36/110] installing patch-2.7-3.8 [ 12s] [37/110] installing pkg-config-0.28-4.35 [ 12s] [38/110] installing sed-4.1c-3.1 [ 12s] [39/110] installing update-alternatives-1.18.15-3.1 [ 12s] [40/110] installing which-2.20-6.1 [ 12s] [41/110] installing zlib-1.2.8-3.38 [ 12s] [42/110] installing libncurses-5.9-3.33 [ 12s] [43/110] installing libncurses6-5.9-3.33 [ 13s] [44/110] installing build-compare-2015.04.28-3.25 [ 13s] [45/110] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 14s] [46/110] installing coreutils-6.9-3.1 [ 14s] [47/110] installing cpp-6.2.1-6.2 [ 14s] [48/110] installing gawk-3.1.5-3.1 [ 15s] [49/110] installing gcc-c++-6.2.1-6.2 [ 15s] [50/110] installing grep-2.5.2-3.1 [ 15s] [51/110] installing less-466-8.1 [ 15s] [52/110] installing libacl-2.2.52-3.41 [ 15s] [53/110] installing libasm-0.153-3.16 [ 15s] [54/110] installing libblkid-2.28-3.1 [ 15s] [55/110] installing libgcrypt-1.7.6-4.1 [ 16s] [56/110] installing libgfortran-6.2.1-6.2 [ 16s] [57/110] installing libopenssl-1.0.2j-3.32 [ 16s] [58/110] installing libreadline-5.2-3.32 [ 16s] [59/110] installing libstdc++-6.2.1-6.2 [ 16s] [60/110] installing make-4.0-3.7 [ 16s] [61/110] installing nss-certs-3.23-3.29 [ 16s] [62/110] installing procps-ng-3.3.9-3.2 [ 16s] [63/110] installing smack-1.3.0-3.32 [ 17s] [64/110] installing xz-devel-5.2.2-3.33 [ 17s] [65/110] installing bzip2-1.0.6-4.34 [ 17s] [66/110] installing libmagic-5.28-4.6 [ 17s] [67/110] installing libxml2-2.9.4-4.33 [ 17s] [68/110] installing xz-5.2.2-3.33 [ 17s] [69/110] installing libdw-0.153-3.16 [ 17s] [70/110] installing ncurses-devel-5.9-3.33 [ 17s] [71/110] installing libstdc++-devel-6.2.1-6.2 [ 18s] [72/110] installing file-5.28-4.6 [ 18s] [73/110] installing libmount-2.28-3.1 [ 18s] [74/110] installing linux-glibc-devel-3.10-3.37 [ 18s] [75/110] installing openssl-1.0.2j-3.32 [ 18s] [76/110] installing readline-devel-5.2-3.32 [ 18s] [77/110] installing tar-1.17-3.1 [ 18s] [78/110] installing db4-4.8.30.NC-3.38 [ 18s] [79/110] installing glibc-locale-2.24-3.19 [ 19s] [80/110] installing gzip-1.3.12-3.31 [ 19s] [81/110] installing libcc1-6.2.1-6.2 [ 19s] [82/110] installing libfdisk1-2.28-3.1 [ 19s] [83/110] installing libubsan-6.2.1-6.2 [ 19s] [84/110] installing libxml2-tools-2.9.4-4.33 [ 19s] [85/110] installing pam-1.1.6-3.2 [ 19s] [86/110] installing tzdata-2016i-4.1 [ 20s] [87/110] installing elfutils-0.153-3.16 [ 20s] [88/110] installing libxslt-1.1.29-3.2 [ 20s] [89/110] installing glibc-devel-2.24-3.19 [ 20s] [90/110] installing libxslt-tools-1.1.29-3.2 [ 20s] [91/110] installing perl-5.20.0-4.13 [ 21s] [92/110] installing gcc-6.2.1-6.2 [ 22s] [93/110] installing util-linux-2.28-3.1 [ 22s] [94/110] installing build-mkbaselibs-20120927-3.1 [ 22s] [95/110] installing qemu-accel-x86_64-aarch64-0.4-3.14 [ 27s] warning: %post(qemu-accel-x86_64-aarch64-0.4-3.14.aarch64) scriptlet failed, exit status 1 [ 27s] [96/110] installing autoconf-2.69-3.40 [ 27s] [97/110] installing util-linux-su-2.28-3.1 [ 27s] [98/110] installing zlib-devel-1.2.8-3.38 [ 27s] [99/110] installing libgpg-error-devel-1.13-4.43 [ 27s] [100/110] installing automake-1.14.1-3.30 [ 27s] [101/110] installing libopenssl-devel-1.0.2j-3.32 [ 27s] [102/110] installing build-20120927-3.1 [ 27s] [103/110] installing libgcrypt-devel-1.7.6-4.1 [ 27s] [104/110] installing libxml2-devel-2.9.4-4.33 [ 27s] [105/110] installing libtool-2.4.2-4.33 [ 28s] [106/110] installing libxslt-devel-1.1.29-3.2 [ 28s] [107/110] installing nss-3.23-3.29 [ 28s] [108/110] installing libsoftokn3-3.23-3.29 [ 28s] [109/110] installing rpm-4.11.0.1-4.17 [ 28s] [110/110] installing rpm-build-4.11.0.1-4.17 [ 28s] removing nis flags from /var/cache/build/root_5/etc/nsswitch.conf... [ 28s] now finalizing build dir... [ 29s] build target is aarch64-tizen-linux [ 29s] ----------------------------------------------------------------- [ 29s] I have the following modifications for xmlsec1.spec: [ 29s] 5c5 [ 29s] < Release: 0 [ 29s] --- [ 29s] > Release: 3.2 [ 29s] 182a183 [ 29s] > %changelog [ 29s] ----------------------------------------------------------------- [ 29s] ----- building xmlsec1.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 30s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/9da804ebd87f8ef0f4e5be92f92d1878-xmlsec1' -ba /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 30s] Building target platforms: aarch64-tizen-linux [ 30s] Building for target aarch64-tizen-linux [ 30s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.SV0v4y [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + rm -rf xmlsec1-1.2.22 [ 30s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.22.tar.gz [ 30s] + /bin/tar -xf - [ 30s] + STATUS=0 [ 30s] + '[' 0 -ne 0 ']' [ 30s] + cd xmlsec1-1.2.22 [ 30s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 30s] + echo 'Patch #0 (d4d3535-to-1ca1a13.diff):' [ 30s] Patch #0 (d4d3535-to-1ca1a13.diff): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/d4d3535-to-1ca1a13.diff [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file include/xmlsec/keyinfo.h [ 30s] patching file include/xmlsec/xmldsig.h [ 30s] patching file src/errors.c [ 30s] patching file src/io.c [ 30s] patching file src/openssl/digests.c [ 30s] patching file src/openssl/x509vfy.c [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch):' [ 30s] Patch #1 (0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Fix-unnecessary-space-and-set-align-on-custom-code.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file include/xmlsec/keyinfo.h [ 30s] patching file include/xmlsec/xmldsig.h [ 30s] patching file src/errors.c [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #2 (0003-Add-gitignore-file.patch):' [ 30s] Patch #2 (0003-Add-gitignore-file.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Add-gitignore-file.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file .gitignore [ 30s] + echo 'Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch):' [ 30s] Patch #3 (0004-Replace-vulnerable-function-to-thread-safety.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-Replace-vulnerable-function-to-thread-safety.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/errors.c [ 30s] patching file src/io.c [ 30s] patching file src/openssl/app.c [ 30s] patching file src/templates.c [ 30s] patching file src/transforms.c [ 30s] patching file src/xmldsig.c [ 30s] patching file src/xmltree.c [ 30s] patching file src/xpath.c [ 30s] + echo 'Patch #4 (0005-Fix-svace-defects.patch):' [ 30s] Patch #4 (0005-Fix-svace-defects.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-Fix-svace-defects.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/bn.c [ 30s] patching file src/templates.c [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #5 (0006-Refine-legacy-code-about-error-handling.patch):' [ 30s] Patch #5 (0006-Refine-legacy-code-about-error-handling.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0006-Refine-legacy-code-about-error-handling.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/errors.c [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #6 (0007-Fix-svace-defect.patch):' [ 30s] Patch #6 (0007-Fix-svace-defect.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0007-Fix-svace-defect.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch):' [ 30s] Patch #7 (0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0008-Add-xmlSecProxyCtx-and-refactor-custumized-code.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file include/xmlsec/xmldsig.h [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch):' [ 30s] Patch #8 (0009-Add-NULL-check-logic-on-custum-code.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0009-Add-NULL-check-logic-on-custum-code.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #9 (0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch):' [ 30s] Patch #9 (0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0010-Add-flag-and-logic-on-xmldsig-for-proxy-validator.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file include/xmlsec/xmldsig.h [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #10 (0011-Seperate-proxyCtxPtr-according-to-purpose.patch):' [ 30s] Patch #10 (0011-Seperate-proxyCtxPtr-according-to-purpose.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0011-Seperate-proxyCtxPtr-according-to-purpose.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file include/xmlsec/xmldsig.h [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #11 (0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch):' [ 30s] Patch #11 (0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0012-Fix-memory-leak-on-xmlSecProxyCtxAdd.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #12 (0013-Add-default-section-to-switch-for-error-handling.patch):' [ 30s] Patch #12 (0013-Add-default-section-to-switch-for-error-handling.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0013-Add-default-section-to-switch-for-error-handling.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/xpath.c [ 30s] + echo 'Patch #13 (0014-Fix-memory-leak-on-upstream-code.patch):' [ 30s] Patch #13 (0014-Fix-memory-leak-on-upstream-code.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0014-Fix-memory-leak-on-upstream-code.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/relationship.c [ 30s] + echo 'Patch #14 (0015-Fix-memory-leak-on-custom-code.patch):' [ 30s] Patch #14 (0015-Fix-memory-leak-on-custom-code.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0015-Fix-memory-leak-on-custom-code.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/xmldsig.c [ 30s] + echo 'Patch #15 (0016-Fix-svace-defects.patch):' [ 30s] Patch #15 (0016-Fix-svace-defects.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0016-Fix-svace-defects.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file src/openssl/signatures.c [ 30s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 30s] + exit 0 [ 30s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.oJrxuR [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd xmlsec1-1.2.22 [ 30s] ++ uname -m [ 30s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 30s] + ref=/usr/lib/rpm [ 30s] + for s in guess sub [ 30s] ++ find -maxdepth 8 -name config.guess [ 30s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 30s] + grep -q config-patches@ ./config.guess [ 30s] + grep -q aarch64 ./config.guess [ 30s] + grep -q ppc64le ./config.guess [ 30s] + for s in guess sub [ 30s] ++ find -maxdepth 8 -name config.sub [ 30s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 30s] + grep -q config-patches@ ./config.sub [ 30s] + grep -q aarch64 ./config.sub [ 30s] + grep -q ppc64le ./config.sub [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 30s] + export CFLAGS [ 30s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 30s] + export CXXFLAGS [ 30s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 30s] + export FFLAGS [ 30s] + LDFLAGS= [ 30s] + export LDFLAGS [ 30s] + LD_AS_NEEDED=1 [ 30s] + export LD_AS_NEEDED [ 30s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 30s] + export CFLAGS [ 30s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 30s] + export CXXFLAGS [ 30s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 30s] + export FFLAGS [ 30s] + autoreconf -v --install --force [ 32s] autoreconf: Entering directory `.' [ 32s] autoreconf: configure.ac: not using Gettext [ 33s] autoreconf: running: aclocal --force -I m4 [ 41s] autoreconf: configure.ac: tracing [ 43s] autoreconf: running: libtoolize --copy --force [ 43s] libtoolize: putting auxiliary files in `.'. [ 43s] libtoolize: copying file `./ltmain.sh' [ 43s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 43s] libtoolize: copying file `m4/libtool.m4' [ 43s] libtoolize: copying file `m4/ltoptions.m4' [ 43s] libtoolize: copying file `m4/ltsugar.m4' [ 43s] libtoolize: copying file `m4/ltversion.m4' [ 44s] libtoolize: copying file `m4/lt~obsolete.m4' [ 52s] autoreconf: running: /usr/bin/autoconf --force [ 55s] autoreconf: running: /usr/bin/autoheader --force [ 57s] autoreconf: running: automake --add-missing --copy --force-missing [ 69s] autoreconf: Leaving directory `.' [ 69s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 69s] configure: WARNING: unrecognized options: --enable-dynamic [ 70s] checking build system type... aarch64-tizen-linux-gnu [ 70s] checking host system type... aarch64-tizen-linux-gnu [ 70s] checking for a BSD-compatible install... /bin/install -c [ 70s] checking whether build environment is sane... yes [ 70s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 70s] checking for gawk... gawk [ 70s] checking whether make sets $(MAKE)... yes [ 70s] checking whether make supports nested variables... yes [ 70s] checking whether UID '399' is supported by ustar format... yes [ 70s] checking whether GID '399' is supported by ustar format... yes [ 70s] checking how to create a ustar tar archive... gnutar [ 70s] checking whether to enable maintainer-specific portions of Makefiles... no [ 70s] checking whether make supports nested variables... (cached) yes [ 70s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 70s] checking whether the C compiler works... yes [ 70s] checking for C compiler default output file name... a.out [ 70s] checking for suffix of executables... [ 70s] checking whether we are cross compiling... no [ 70s] checking for suffix of object files... o [ 70s] checking whether we are using the GNU C compiler... yes [ 70s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 70s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 70s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 70s] checking for style of include used by make... GNU [ 70s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 70s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 70s] checking for grep that handles long lines and -e... /bin/grep [ 70s] checking for egrep... /bin/grep -E [ 70s] checking for ANSI C header files... yes [ 70s] checking how to print strings... printf [ 70s] checking for a sed that does not truncate output... /bin/sed [ 70s] checking for fgrep... /bin/grep -F [ 70s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 70s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 70s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 70s] checking the name lister (/bin/nm -B) interface... BSD nm [ 70s] checking whether ln -s works... yes [ 70s] checking the maximum length of command line arguments... 1572864 [ 70s] checking whether the shell understands some XSI constructs... yes [ 70s] checking whether the shell understands "+="... yes [ 70s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 70s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 70s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 70s] checking for aarch64-tizen-linux-gnu-objdump... no [ 70s] checking for objdump... objdump [ 70s] checking how to recognize dependent libraries... pass_all [ 70s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 70s] checking for dlltool... no [ 70s] checking how to associate runtime and link libraries... printf %s\n [ 70s] checking for aarch64-tizen-linux-gnu-ar... no [ 70s] checking for ar... ar [ 70s] checking for archiver @FILE support... @ [ 70s] checking for aarch64-tizen-linux-gnu-strip... no [ 70s] checking for strip... strip [ 70s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 70s] checking for ranlib... ranlib [ 70s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 70s] checking for sysroot... no [ 70s] checking for aarch64-tizen-linux-gnu-mt... no [ 70s] checking for mt... no [ 70s] checking if : is a manifest tool... no [ 70s] checking for sys/types.h... yes [ 70s] checking for sys/stat.h... yes [ 70s] checking for stdlib.h... yes [ 70s] checking for string.h... yes [ 70s] checking for memory.h... yes [ 70s] checking for strings.h... yes [ 71s] checking for inttypes.h... yes [ 71s] checking for stdint.h... yes [ 71s] checking for unistd.h... yes [ 71s] checking for dlfcn.h... yes [ 71s] checking for objdir... .libs [ 71s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 71s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 71s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 71s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 71s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 71s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 71s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 71s] checking whether -lc should be explicitly linked in... no [ 71s] checking dynamic linker characteristics... GNU/Linux ld.so [ 71s] checking how to hardcode library paths into programs... immediate [ 71s] checking whether stripping libraries is possible... yes [ 71s] checking if libtool supports shared libraries... yes [ 71s] checking whether to build shared libraries... yes [ 71s] checking whether to build static libraries... yes [ 71s] checking for cp... /bin/cp [ 71s] checking for mv... /bin/mv [ 71s] checking for tar... /bin/tar [ 71s] checking for perl... /bin/perl [ 71s] checking for dirent.h that defines DIR... yes [ 71s] checking for library containing opendir... none required [ 71s] checking for ANSI C header files... (cached) yes [ 71s] checking stdio.h usability... yes [ 71s] checking stdio.h presence... yes [ 71s] checking for stdio.h... yes [ 71s] checking for stdlib.h... (cached) yes [ 71s] checking for string.h... (cached) yes [ 71s] checking ctype.h usability... yes [ 71s] checking ctype.h presence... yes [ 71s] checking for ctype.h... yes [ 71s] checking errno.h usability... yes [ 71s] checking errno.h presence... yes [ 71s] checking for errno.h... yes [ 71s] checking ansidecl.h usability... no [ 71s] checking ansidecl.h presence... no [ 71s] checking for ansidecl.h... no [ 71s] checking time.h usability... yes [ 71s] checking time.h presence... yes [ 71s] checking for time.h... yes [ 71s] checking for strchr... yes [ 71s] checking for strrchr... yes [ 71s] checking for printf... yes [ 71s] checking for sprintf... yes [ 71s] checking for fprintf... yes [ 71s] checking for snprintf... yes [ 71s] checking for vfprintf... yes [ 71s] checking for vsprintf... yes [ 71s] checking for vsnprintf... yes [ 72s] checking for sscanf... yes [ 72s] checking for timegm... yes [ 72s] checking for development environment... no [ 72s] checking for man pages build... no [ 72s] checking for docs build... no [ 72s] checking for __FUNCTION__ or __func__... __func__ [ 72s] checking size of size_t... 8 [ 72s] checking for pkg-config... yes [ 72s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 72s] checking pkg-config is at least version 0.9.0... yes [ 72s] checking for LIBXML... yes [ 72s] checking for LIBXSLT... yes [ 72s] checking for OPENSSL... no [ 72s] checking for OPENSSL... yes [ 72s] checking for NSS... no [ 72s] checking for NSS... no [ 72s] checking for NSS... no [ 73s] checking for NSS... no [ 73s] checking for nspr libraries >= 4.4.1... no [ 73s] checking for nss libraries >= 3.9... no [ 73s] checking for GCRYPT... no [ 73s] checking for GCRYPT... no [ 73s] checking for GCRYPT... no [ 73s] checking for gcrypt libraries >= 1.4.0... checking for gnutls libraries >= 2.8.0... no [ 73s] checking for mscrypto libraries... none [ 73s] checking for default crypto library... yes ('openssl') [ 73s] checking for MD5 support... yes [ 73s] checking for RIPEMD-160 support... yes [ 73s] checking for SHA1 support... yes [ 73s] checking for SHA224 support... yes [ 73s] checking for SHA256 support... yes [ 73s] checking for SHA384 support... yes [ 73s] checking for SHA512 support... yes [ 73s] checking for HMAC support... yes [ 73s] checking for DSA support... yes [ 73s] checking for RSA support... yes [ 73s] checking for x509 support... yes [ 73s] checking for DES support... yes [ 73s] checking for AES support... yes [ 73s] checking for GOST support... no [ 73s] checking for EXPERMIENTAL GOST2012 support... no [ 73s] checking for XMLDSig support... yes [ 73s] checking for XMLEnc support... yes [ 73s] checking for xmlsec-crypto dynamic loading support... no [ 73s] checking for xmlsec-crypto dynamic loading support in command line tool... no [ 73s] checking for docs folder... $(datadir)/doc/xmlsec1 [ 73s] checking for Simple Keys Manager testing... yes [ 73s] checking for templates testing... yes [ 73s] checking for debugging... no [ 73s] checking for profiling... no [ 73s] checking for pedantic... no [ 73s] checking for static linking... no [ 73s] checking that generated files are newer than configure... done [ 73s] configure: creating ./config.status [ 73s] config.status: creating include/xmlsec/openssl/Makefile [ 73s] config.status: creating src/openssl/Makefile [ 73s] config.status: creating include/xmlsec/gcrypt/Makefile [ 73s] config.status: creating src/gcrypt/Makefile [ 74s] config.status: creating include/xmlsec/version.h [ 74s] config.status: creating Makefile [ 74s] config.status: creating include/Makefile [ 74s] config.status: creating include/xmlsec/Makefile [ 74s] config.status: creating include/xmlsec/private/Makefile [ 74s] config.status: creating src/Makefile [ 74s] config.status: creating apps/Makefile [ 74s] config.status: creating docs/Makefile [ 74s] config.status: creating docs/api/Makefile [ 74s] config.status: creating man/Makefile [ 74s] config.status: creating xmlsec1-openssl.pc [ 74s] config.status: creating xmlsec1-gnutls.pc [ 74s] config.status: creating xmlsec1-gcrypt.pc [ 74s] config.status: creating xmlsec1-nss.pc [ 74s] config.status: creating xmlsec1.spec [ 74s] config.status: creating xmlsec1Conf.sh [ 74s] config.status: creating xmlsec1-config [ 74s] config.status: creating config.h [ 74s] config.status: executing depfiles commands [ 75s] config.status: executing libtool commands [ 75s] configure: WARNING: unrecognized options: --enable-dynamic [ 75s] + /bin/make -j4 [ 75s] /bin/make all-recursive [ 75s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 75s] Making all in include [ 75s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 75s] Making all in xmlsec [ 75s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 75s] Making all in private [ 75s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 75s] make[4]: Nothing to be done for 'all'. [ 75s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 75s] Making all in openssl [ 75s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 75s] make[4]: Nothing to be done for 'all'. [ 75s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 75s] Making all in gcrypt [ 75s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 75s] make[4]: Nothing to be done for 'all'. [ 75s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 75s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 75s] make[4]: Nothing to be done for 'all-am'. [ 75s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 75s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 75s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 75s] make[3]: Nothing to be done for 'all-am'. [ 75s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 75s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 75s] Making all in src [ 75s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 75s] Making all in . [ 75s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 75s] CC app.lo [ 75s] CC bn.lo [ 75s] CC base64.lo [ 75s] CC buffer.lo [ 75s] CC c14n.lo [ 76s] CC dl.lo [ 76s] CC enveloped.lo [ 76s] CC errors.lo [ 76s] CC io.lo [ 76s] In file included from /usr/include/libxml2/libxml/tree.h:18:0, [ 76s] from errors.c:18: [ 76s] errors.c: In function 'xmlSecError': [ 76s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrVPrintf' differ in signedness [-Wpointer-sign] [ 76s] #define BAD_CAST (xmlChar *) [ 76s] ^ [ 76s] errors.c:234:60: note: in expansion of macro 'BAD_CAST' [ 76s] xmlSecStrVPrintf(error_msg, sizeof(error_msg), BAD_CAST msg, va); [ 76s] ^~~~~~~~ [ 76s] /usr/include/libxml2/libxml/xmlstring.h:103:17: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 76s] xmlStrVPrintf (xmlChar *buf, [ 76s] ^~~~~~~~~~~~~ [ 76s] io.c: In function 'xmlSecTransformInputURIOpen': [ 76s] io.c:430:36: warning: format '%s' expects argument of type 'char *', but argument 9 has type 'int' [-Wformat=] [ 76s] "uri=%s;error=%s", [ 76s] ^ [ 76s] io.c: In function 'xmlSecTransformInputURIPopBin': [ 76s] io.c:530:33: warning: format '%s' expects argument of type 'char *', but argument 8 has type 'int' [-Wformat=] [ 76s] "error=%s", strerror_r(errno, buf, sizeof(buf))); [ 76s] ^ [ 76s] CC keyinfo.lo [ 76s] CC keys.lo [ 76s] CC keysdata.lo [ 76s] CC keysmngr.lo [ 77s] CC kw_aes_des.lo [ 77s] CC list.lo [ 77s] CC membuf.lo [ 77s] CC nodeset.lo [ 77s] CC parser.lo [ 77s] CC relationship.lo [ 77s] CC soap.lo [ 77s] CC strings.lo [ 77s] CC templates.lo [ 77s] CC transforms.lo [ 78s] CC x509.lo [ 78s] CC xmldsig.lo [ 78s] xmldsig.c: In function 'xmlSecProxyCtxAdd': [ 78s] xmldsig.c:233:28: warning: format '%d' expects argument of type 'int', but argument 8 has type 'long unsigned int' [-Wformat=] [ 78s] "size=%d", sizeof(xmlSecProxyCtx)); [ 78s] ^ [ 78s] xmldsig.c: In function 'xmlSecDecodeCmp': [ 78s] xmldsig.c:921:18: warning: comparison between pointer and integer [ 78s] while(*plain != NULL) { [ 78s] ^~ [ 78s] xmldsig.c:922:21: warning: comparison between pointer and integer [ 78s] if(*encoded == NULL) [ 78s] ^~ [ 78s] xmldsig.c:927:31: warning: comparison between pointer and integer [ 78s] if(*(encoded + 1) == NULL && *(encoded + 2) == NULL) [ 78s] ^~ [ 78s] xmldsig.c:927:57: warning: comparison between pointer and integer [ 78s] if(*(encoded + 1) == NULL && *(encoded + 2) == NULL) [ 78s] ^~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c: In function 'xmlSecDSigCtxProcessReferences': [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:394:15: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern size_t strlen (const char *__s) [ 78s] ^~~~~~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:394:15: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern size_t strlen (const char *__s) [ 78s] ^~~~~~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:394:15: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern size_t strlen (const char *__s) [ 78s] ^~~~~~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:394:15: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern size_t strlen (const char *__s) [ 78s] ^~~~~~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:32: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:40: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:394:15: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern size_t strlen (const char *__s) [ 78s] ^~~~~~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:32: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:40: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:394:15: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern size_t strlen (const char *__s) [ 78s] ^~~~~~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:32: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:40: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:32: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 2 of '__builtin_strcmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] xmldsig.c:987:40: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmldsig.c:987:32: warning: pointer targets in passing argument 1 of 'strncmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:143:12: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern int strncmp (const char *__s1, const char *__s2, size_t __n) [ 78s] ^~~~~~~ [ 78s] In file included from /usr/include/string.h:630:0, [ 78s] from xmldsig.c:19: [ 78s] xmldsig.c:987:40: warning: pointer targets in passing argument 2 of 'strncmp' differ in signedness [-Wpointer-sign] [ 78s] if(strncmp(refUri, pc->cache, xmlStrlen(refUri)) == 0) { [ 78s] ^ [ 78s] In file included from xmldsig.c:19:0: [ 78s] /usr/include/string.h:143:12: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] extern int strncmp (const char *__s1, const char *__s2, size_t __n) [ 78s] ^~~~~~~ [ 78s] CC xmlenc.lo [ 78s] CC xmlsec.lo [ 78s] CC xmltree.lo [ 78s] In file included from /usr/include/libxml2/libxml/tree.h:18:0, [ 78s] from xmltree.c:19: [ 78s] xmltree.c: In function 'xmlSecGenerateID': [ 78s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 78s] #define BAD_CAST (xmlChar *) [ 78s] ^ [ 78s] xmltree.c:844:38: note: in expansion of macro 'BAD_CAST' [ 78s] xmlSecStrPrintf(tmp, tmpLen, BAD_CAST "%s%s", prefix, res); [ 78s] ^~~~~~~~ [ 78s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmlStrPrintf (xmlChar *buf, [ 78s] ^~~~~~~~~~~~ [ 78s] xmltree.c: In function 'xmlSecGetQName': [ 78s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 78s] #define BAD_CAST (xmlChar *) [ 78s] ^ [ 78s] xmltree.c:1058:37: note: in expansion of macro 'BAD_CAST' [ 78s] xmlSecStrPrintf(qname, len, BAD_CAST "%s:%s", ns->prefix, local); [ 78s] ^~~~~~~~ [ 78s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 78s] xmlStrPrintf (xmlChar *buf, [ 78s] ^~~~~~~~~~~~ [ 78s] CC xpath.lo [ 79s] CC xslt.lo [ 79s] CCLD libxmlsec1.la [ 79s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 79s] Making all in openssl [ 79s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 79s] CC libxmlsec1_openssl_la-app.lo [ 79s] CC libxmlsec1_openssl_la-bn.lo [ 79s] CC libxmlsec1_openssl_la-ciphers.lo [ 79s] CC libxmlsec1_openssl_la-crypto.lo [ 80s] In file included from /usr/include/libxml2/libxml/tree.h:18:0, [ 80s] from app.c:15: [ 80s] app.c: In function 'xmlSecOpenSSLDefaultPasswordCallback': [ 80s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 80s] #define BAD_CAST (xmlChar *) [ 80s] ^ [ 80s] app.c:1563:53: note: in expansion of macro 'BAD_CAST' [ 80s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password for \"%s\" file: ", filename); [ 80s] ^~~~~~~~ [ 80s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 80s] xmlStrPrintf (xmlChar *buf, [ 80s] ^~~~~~~~~~~~ [ 80s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 80s] #define BAD_CAST (xmlChar *) [ 80s] ^ [ 80s] app.c:1565:53: note: in expansion of macro 'BAD_CAST' [ 80s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password: "); [ 80s] ^~~~~~~~ [ 80s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 80s] xmlStrPrintf (xmlChar *buf, [ 80s] ^~~~~~~~~~~~ [ 80s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 80s] #define BAD_CAST (xmlChar *) [ 80s] ^ [ 80s] app.c:1583:53: note: in expansion of macro 'BAD_CAST' [ 80s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password for \"%s\" file again: ", filename); [ 80s] ^~~~~~~~ [ 80s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 80s] xmlStrPrintf (xmlChar *buf, [ 80s] ^~~~~~~~~~~~ [ 80s] /usr/include/libxml2/libxml/xmlstring.h:35:18: warning: pointer targets in passing argument 3 of 'xmlStrPrintf' differ in signedness [-Wpointer-sign] [ 80s] #define BAD_CAST (xmlChar *) [ 80s] ^ [ 80s] app.c:1585:53: note: in expansion of macro 'BAD_CAST' [ 80s] xmlSecStrPrintf(prompt, sizeof(prompt), BAD_CAST "Enter password again: "); [ 80s] ^~~~~~~~ [ 80s] /usr/include/libxml2/libxml/xmlstring.h:98:17: note: expected 'const char *' but argument is of type 'xmlChar * {aka unsigned char *}' [ 80s] xmlStrPrintf (xmlChar *buf, [ 80s] ^~~~~~~~~~~~ [ 80s] CC libxmlsec1_openssl_la-digests.lo [ 80s] CC libxmlsec1_openssl_la-evp.lo [ 80s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 80s] CC libxmlsec1_openssl_la-hmac.lo [ 80s] CC libxmlsec1_openssl_la-kw_aes.lo [ 80s] CC libxmlsec1_openssl_la-kw_des.lo [ 81s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 81s] CC libxmlsec1_openssl_la-signatures.lo [ 81s] CC libxmlsec1_openssl_la-symkeys.lo [ 81s] CC libxmlsec1_openssl_la-x509.lo [ 81s] CC libxmlsec1_openssl_la-x509vfy.lo [ 82s] CCLD libxmlsec1-openssl.la [ 83s] libtool: link: warning: `/lib64/libxml2.la' seems to be moved [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 83s] Making all in gcrypt [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 83s] CC libxmlsec1_gcrypt_la-asn1.lo [ 83s] CC libxmlsec1_gcrypt_la-app.lo [ 83s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 83s] CC libxmlsec1_gcrypt_la-crypto.lo [ 83s] CC libxmlsec1_gcrypt_la-digests.lo [ 83s] CC libxmlsec1_gcrypt_la-hmac.lo [ 83s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 83s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 84s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 84s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 84s] CC libxmlsec1_gcrypt_la-signatures.lo [ 85s] CCLD libxmlsec1-gcrypt.la [ 85s] libtool: link: warning: `/lib64/libxml2.la' seems to be moved [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 85s] Making all in apps [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 85s] CC xmlsec.o [ 85s] CC crypto.o [ 85s] CC cmdline.o [ 85s] CCLD xmlsec1 [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 86s] Making all in man [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 86s] make[2]: Nothing to be done for 'all'. [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 86s] Making all in docs [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 86s] Copying docs... [ 86s] Making all in api [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 86s] Copying api-docs... [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 86s] make[3]: Nothing to be done for 'all-am'. [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 86s] + exit 0 [ 86s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.yLF7v0 [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd xmlsec1-1.2.22 [ 86s] + LANG=C [ 86s] + export LANG [ 86s] + unset DISPLAY [ 86s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 [ 86s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 [ 86s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 install [ 86s] Making install in include [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 86s] Making install in xmlsec [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] Making install in private [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 86s] /bin/make install-exec-hook [ 86s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 86s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/private [ 86s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/private' [ 86s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/private' [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/private' [ 86s] Making install in openssl [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 86s] /bin/make install-exec-hook [ 86s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 86s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/openssl [ 86s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/openssl' [ 86s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/openssl' [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/openssl' [ 86s] Making install in gcrypt [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 86s] /bin/make install-exec-hook [ 86s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 86s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/gcrypt [ 86s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/gcrypt' [ 86s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec/gcrypt' [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec/gcrypt' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] /bin/make install-exec-hook [ 86s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec [ 86s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec' [ 86s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h soap.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/include/xmlsec1/xmlsec' [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include/xmlsec' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 86s] make[3]: Nothing to be done for 'install-exec-am'. [ 86s] make[3]: Nothing to be done for 'install-data-am'. [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/include' [ 86s] Making install in src [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 86s] Making install in . [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 86s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 86s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.22 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1.so.1.2.22 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so.1; }; }) [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1.so.1.2.22 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.22 libxmlsec1.so; }; }) [ 86s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1.la [ 86s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1.a [ 86s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1.a [ 86s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1.a [ 86s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 86s] make[3]: Nothing to be done for 'install-data-am'. [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 86s] Making install in openssl [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 86s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 86s] libtool: install: warning: relinking `libxmlsec1-openssl.la' [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -version-info 3:22:2 -o libxmlsec1-openssl.la -rpath /usr/lib64 libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -lssl -lcrypto -lxslt -lxml2 -lz -llzma -lm -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64) [ 86s] libtool: relink: warning: `/lib64/libxml2.la' seems to be moved [ 86s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-openssl.so.1.2.22 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so.1; }; }) [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.22 libxmlsec1-openssl.so; }; }) [ 86s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-openssl.la [ 86s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-openssl.a [ 86s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-openssl.a [ 86s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-openssl.a [ 86s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 86s] make[3]: Nothing to be done for 'install-data-am'. [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/openssl' [ 86s] Making install in gcrypt [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 86s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 86s] libtool: install: warning: relinking `libxmlsec1-gcrypt.la' [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/libtool --silent --tag CC --mode=relink aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -version-info 3:22:2 -o libxmlsec1-gcrypt.la -rpath /usr/lib64 libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -L/usr/lib64 -lgcrypt -lgpg-error -lxslt -lxml2 -lz -llzma -lm -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64) [ 86s] libtool: relink: warning: `/lib64/libxml2.la' seems to be moved [ 86s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.22T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-gcrypt.so.1.2.22 [ 86s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so.1; }; }) [ 87s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64 && { ln -s -f libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.22 libxmlsec1-gcrypt.so; }; }) [ 87s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-gcrypt.la [ 87s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 87s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 87s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 87s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 87s] make[3]: Nothing to be done for 'install-data-am'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/gcrypt' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src' [ 87s] Making install in apps [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/bin' [ 87s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/bin' [ 87s] libtool: install: warning: `../src/openssl/libxmlsec1-openssl.la' has not been installed in `/usr/lib64' [ 87s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/src/libxmlsec1.la' has not been installed in `/usr/lib64' [ 87s] libtool: install: warning: `../src/libxmlsec1.la' has not been installed in `/usr/lib64' [ 87s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/bin/xmlsec1 [ 87s] make[2]: Nothing to be done for 'install-data-am'. [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/apps' [ 87s] Making install in man [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 87s] make[2]: Nothing to be done for 'install-exec-am'. [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/man/man1' [ 87s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/man/man1' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/man' [ 87s] Making install in docs [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 87s] Making install in api [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 87s] make[3]: Nothing to be done for 'install-exec-am'. [ 87s] make[3]: Nothing to be done for 'install-data-am'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs/api' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 87s] make[3]: Nothing to be done for 'install-exec-am'. [ 87s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1 [ 87s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1/images [ 87s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1/api [ 87s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1/api/images [ 87s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1 [ 87s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1 [ 87s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1/images [ 87s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1/api [ 87s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 87s] Makefile:794: recipe for target 'install-data-local' failed [ 87s] make[3]: [install-data-local] Error 1 (ignored) [ 87s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1/api/images [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22/docs' [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/bin' [ 87s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/bin' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 87s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/aclocal' [ 87s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/aclocal' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig' [ 87s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22' [ 87s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/info/dir [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 -regex '.*\.la$' [ 87s] + xargs rm -f -- [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/info [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/packages [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1 [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc/xmlsec1-1.2.22 [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/gtk-doc [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/doc [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/man [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 -regex '.*/man/man./.*.[0-9]' [ 87s] + xargs rm -f -- [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 87s] + xargs rm -f -- [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 87s] + xargs rm -f -- [ 87s] + _target= [ 87s] + _symlinks=0 [ 87s] + _files=() [ 87s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 [ 87s] + read _file [ 87s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 87s] + _files+=($_file) [ 87s] + read _file [ 87s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 87s] + _files+=($_file) [ 87s] + read _file [ 87s] + test -z [ 87s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 87s] ++ for i in '${_files[*]}' [ 87s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 87s] ++ for i in '${_files[*]}' [ 87s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 87s] ++ sort [ 87s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 87s] ++ seq 1 1 [ 87s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 87s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 87s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 87s] + test 0 = 1 [ 87s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 87s] + _files=() [ 87s] + read _file [ 87s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.22 [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/bin/xmlsec1 [ 87s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-gcrypt.so.1.2.22 [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1-openssl.so.1.2.22 [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/lib64/libxmlsec1.so.1.2.22 [ 88s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 88s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 88s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 88s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 88s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 88s] 4645 blocks [ 88s] + /usr/lib/rpm/check-buildroot [ 88s] + /usr/lib/rpm//brp-compress [ 88s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 88s] + /usr/lib/rpm/brp-python-hardlink [ 88s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 [ 88s] Processing files: xmlsec1-1.2.22-3.2.aarch64 [ 88s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 88s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 88s] [ 88s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.cAHRui [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd xmlsec1-1.2.22 [ 88s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1 [ 88s] + export LICENSEDIR [ 88s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1 [ 89s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1 [ 89s] + exit 0 [ 89s] Provides: libxmlsec1.so.1()(64bit) xmlsec1 = 1.2.22-3.2 xmlsec1(aarch-64) = 1.2.22-3.2 [ 89s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Requires(post): /sbin/ldconfig [ 89s] Requires(postun): /sbin/ldconfig [ 89s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.12)(64bit) libxml2.so.2(LIBXML2_2.6.2)(64bit) libxmlsec1-openssl.so.1()(64bit) libxmlsec1.so.1()(64bit) libxslt.so.1()(64bit) libxslt.so.1(LIBXML2_1.0.11)(64bit) libxslt.so.1(LIBXML2_1.0.22)(64bit) [ 89s] Processing files: xmlsec1-debugsource-1.2.22-3.2.aarch64 [ 89s] Provides: xmlsec1-debugsource = 1.2.22-3.2 xmlsec1-debugsource(aarch-64) = 1.2.22-3.2 [ 89s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 89s] Processing files: xmlsec1-gcrypt-1.2.22-3.2.aarch64 [ 89s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 89s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 89s] [ 89s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.eXh5GA [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd xmlsec1-1.2.22 [ 89s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 89s] + export LICENSEDIR [ 89s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 89s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 89s] + exit 0 [ 89s] Provides: libxmlsec1-gcrypt.so.1()(64bit) xmlsec1-gcrypt = 1.2.22-3.2 xmlsec1-gcrypt(aarch-64) = 1.2.22-3.2 [ 89s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Requires(post): /sbin/ldconfig [ 89s] Requires(postun): /sbin/ldconfig [ 89s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libgcrypt.so.20()(64bit) libgcrypt.so.20(GCRYPT_1.6)(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxmlsec1.so.1()(64bit) [ 89s] Processing files: xmlsec1-openssl-1.2.22-3.2.aarch64 [ 89s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 89s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 89s] [ 89s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.l0Tf4S [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd xmlsec1-1.2.22 [ 89s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-openssl [ 89s] + export LICENSEDIR [ 89s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-openssl [ 89s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-openssl [ 89s] + exit 0 [ 89s] Provides: libxmlsec1-openssl.so.1()(64bit) xmlsec1-openssl = 1.2.22-3.2 xmlsec1-openssl(aarch-64) = 1.2.22-3.2 [ 89s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Requires(post): /sbin/ldconfig [ 89s] Requires(postun): /sbin/ldconfig [ 89s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcrypto.so.1.0.0()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxmlsec1.so.1()(64bit) [ 89s] Processing files: xmlsec1-devel-1.2.22-3.2.aarch64 [ 89s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 89s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 89s] [ 89s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.kdY0yb [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd xmlsec1-1.2.22 [ 89s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-devel [ 89s] + export LICENSEDIR [ 89s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-devel [ 89s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-devel [ 89s] + exit 0 [ 89s] Provides: pkgconfig(xmlsec1) = 1.2.22 pkgconfig(xmlsec1-gcrypt) = 1.2.22 pkgconfig(xmlsec1-openssl) = 1.2.22 xmlsec1-devel = 1.2.22-3.2 xmlsec1-devel(aarch-64) = 1.2.22-3.2 [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1()(64bit) libxmlsec1-openssl.so.1()(64bit) libxmlsec1.so.1()(64bit) pkgconfig(libxml-2.0) >= 2.7.4 pkgconfig(libxslt) >= 1.0.20 [ 89s] Processing files: xmlsec1-devel-static-1.2.22-3.2.aarch64 [ 89s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 89s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 89s] [ 89s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.bm6Rvv [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd xmlsec1-1.2.22 [ 89s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-devel-static [ 89s] + export LICENSEDIR [ 89s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-devel-static [ 89s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64/usr/share/licenses/xmlsec1-devel-static [ 89s] + exit 0 [ 89s] Provides: xmlsec1-devel-static = 1.2.22-3.2 xmlsec1-devel-static(aarch-64) = 1.2.22-3.2 [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Processing files: xmlsec1-debuginfo-1.2.22-3.2.aarch64 [ 89s] warning: File listed twice: /usr/lib/debug/.build-id [ 89s] Provides: xmlsec1-debuginfo = 1.2.22-3.2 xmlsec1-debuginfo(aarch-64) = 1.2.22-3.2 [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.22-3.2.aarch64 [ 89s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.22-3.2 xmlsec1-gcrypt-debuginfo(aarch-64) = 1.2.22-3.2 [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Processing files: xmlsec1-openssl-debuginfo-1.2.22-3.2.aarch64 [ 89s] Provides: xmlsec1-openssl-debuginfo = 1.2.22-3.2 xmlsec1-openssl-debuginfo(aarch-64) = 1.2.22-3.2 [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 [ 89s] warning: Could not canonicalize hostname: obsnw07 [ 89s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.22-3.2.src.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-1.2.22-3.2.aarch64.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debugsource-1.2.22-3.2.aarch64.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-1.2.22-3.2.aarch64.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-1.2.22-3.2.aarch64.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-1.2.22-3.2.aarch64.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-static-1.2.22-3.2.aarch64.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debuginfo-1.2.22-3.2.aarch64.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-debuginfo-1.2.22-3.2.aarch64.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-debuginfo-1.2.22-3.2.aarch64.rpm [ 92s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.cppOkN [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd xmlsec1-1.2.22 [ 92s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.22-3.2.aarch64 [ 92s] + exit 0 [ 92s] ... checking for files with abuild user/group [ 92s] ... creating baselibs [ 93s] ... comparing built packages with the former built [ 93s] /usr/lib/build/pkg-diff.sh [ 93s] compare /.build.oldpackages/xmlsec1-1.2.22-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.22-3.2.src.rpm [ 93s] This is not a prerelease project. Compare the project name. [ 93s] comparing rpmtags [ 93s] comparing RELEASE [ 93s] comparing PROVIDES [ 93s] comparing scripts [ 93s] comparing filelist [ 93s] comparing file checksum [ 93s] RPM meta information is identical [ 93s] compare /.build.oldpackages/xmlsec1-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-1.2.22-3.2.aarch64.rpm [ 93s] Comparing xmlsec1-1.2.22-3.1.aarch64.rpm to xmlsec1-1.2.22-3.2.aarch64.rpm [ 93s] This is not a prerelease project. Compare the project name. [ 93s] comparing rpmtags [ 93s] comparing RELEASE [ 93s] comparing PROVIDES [ 93s] comparing scripts [ 93s] comparing filelist [ 94s] comparing file checksum [ 94s] creating rename script [ 94s] RPM meta information is identical [ 94s] compare /.build.oldpackages/xmlsec1-debuginfo-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debuginfo-1.2.22-3.2.aarch64.rpm [ 94s] skipping -debuginfo package [ 94s] compare /.build.oldpackages/xmlsec1-debugsource-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debugsource-1.2.22-3.2.aarch64.rpm [ 94s] Comparing xmlsec1-debugsource-1.2.22-3.1.aarch64.rpm to xmlsec1-debugsource-1.2.22-3.2.aarch64.rpm [ 94s] This is not a prerelease project. Compare the project name. [ 94s] comparing rpmtags [ 94s] comparing RELEASE [ 94s] comparing PROVIDES [ 94s] comparing scripts [ 94s] comparing filelist [ 94s] comparing file checksum [ 94s] creating rename script [ 94s] RPM meta information is identical [ 94s] compare /.build.oldpackages/xmlsec1-devel-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-1.2.22-3.2.aarch64.rpm [ 94s] Comparing xmlsec1-devel-1.2.22-3.1.aarch64.rpm to xmlsec1-devel-1.2.22-3.2.aarch64.rpm [ 94s] This is not a prerelease project. Compare the project name. [ 94s] comparing rpmtags [ 94s] comparing RELEASE [ 94s] comparing PROVIDES [ 94s] comparing scripts [ 94s] comparing filelist [ 94s] comparing file checksum [ 94s] creating rename script [ 94s] RPM meta information is identical [ 94s] compare /.build.oldpackages/xmlsec1-devel-static-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-static-1.2.22-3.2.aarch64.rpm [ 95s] Comparing xmlsec1-devel-static-1.2.22-3.1.aarch64.rpm to xmlsec1-devel-static-1.2.22-3.2.aarch64.rpm [ 95s] This is not a prerelease project. Compare the project name. [ 95s] comparing rpmtags [ 95s] comparing RELEASE [ 95s] comparing PROVIDES [ 95s] comparing scripts [ 95s] comparing filelist [ 95s] comparing file checksum [ 95s] creating rename script [ 95s] RPM file checksum differs. [ 95s] Extracting packages [ 95s] /usr/lib64/libxmlsec1_gcrypt_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 95s] /usr/lib64/libxmlsec1_gcrypt_la-asn1.o: only difference was in build-id or gnu_debuglink, GOOD. [ 95s] /usr/lib64/libxmlsec1_gcrypt_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 95s] /usr/lib64/libxmlsec1_gcrypt_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_gcrypt_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_gcrypt_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_gcrypt_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_gcrypt_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_gcrypt_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_gcrypt_la-asymkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_gcrypt_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_openssl_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_openssl_la-bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_openssl_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_openssl_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_openssl_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 96s] /usr/lib64/libxmlsec1_openssl_la-evp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-evp_signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-kt_rsa.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/libxmlsec1_openssl_la-x509vfy.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/base64.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/buffer.o: only difference was in build-id or gnu_debuglink, GOOD. [ 97s] /usr/lib64/c14n.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/dl.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/enveloped.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/errors.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/io.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/keyinfo.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/keys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/keysdata.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/keysmngr.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/kw_aes_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/list.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/membuf.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/nodeset.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/parser.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/relationship.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/soap.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/strings.o: only difference was in build-id or gnu_debuglink, GOOD. [ 98s] /usr/lib64/templates.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/transforms.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/xmldsig.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/xmlenc.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/xmlsec.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/xmltree.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/xpath.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] /usr/lib64/xslt.o: only difference was in build-id or gnu_debuglink, GOOD. [ 99s] Package content is identical [ 99s] compare /.build.oldpackages/xmlsec1-gcrypt-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-1.2.22-3.2.aarch64.rpm [ 99s] Comparing xmlsec1-gcrypt-1.2.22-3.1.aarch64.rpm to xmlsec1-gcrypt-1.2.22-3.2.aarch64.rpm [ 99s] This is not a prerelease project. Compare the project name. [ 99s] comparing rpmtags [ 99s] comparing RELEASE [ 99s] comparing PROVIDES [ 99s] comparing scripts [ 99s] comparing filelist [ 99s] comparing file checksum [ 99s] creating rename script [ 99s] RPM meta information is identical [ 99s] compare /.build.oldpackages/xmlsec1-gcrypt-debuginfo-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-debuginfo-1.2.22-3.2.aarch64.rpm [ 99s] skipping -debuginfo package [ 99s] compare /.build.oldpackages/xmlsec1-openssl-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-1.2.22-3.2.aarch64.rpm [ 100s] Comparing xmlsec1-openssl-1.2.22-3.1.aarch64.rpm to xmlsec1-openssl-1.2.22-3.2.aarch64.rpm [ 100s] This is not a prerelease project. Compare the project name. [ 100s] comparing rpmtags [ 100s] comparing RELEASE [ 100s] comparing PROVIDES [ 100s] comparing scripts [ 100s] comparing filelist [ 100s] comparing file checksum [ 100s] creating rename script [ 100s] RPM meta information is identical [ 100s] compare /.build.oldpackages/xmlsec1-openssl-debuginfo-1.2.22-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-debuginfo-1.2.22-3.2.aarch64.rpm [ 100s] skipping -debuginfo package [ 100s] compare validated built as identical ! [ 100s] [ 100s] obsnw07 finished "build xmlsec1.spec" at Fri May 19 23:57:37 UTC 2017. [ 100s]