[ 0s] Memory limit set to 87947220KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw02 started "build _service:gbs:dracut.spec" at Sat May 20 00:51:28 UTC 2017. [ 0s] [ 0s] Building dracut for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'bdf4bc6c191a364c6a609eb310c8d80f' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 8s] [1/119] installing libmagic-data-5.28-4.11 [ 8s] [2/119] installing setup-0.9-3.20 [ 8s] [3/119] installing terminfo-base-5.9-3.40 [ 8s] [4/119] installing filesystem-3.1-3.2 [ 8s] [5/119] installing glibc-2.24-3.20 [ 8s] [6/119] installing libatomic-6.2.1-6.2 [ 8s] [7/119] installing libgcc-6.2.1-6.2 [ 8s] [8/119] installing bash-3.2.57-4.2 [ 8s] [9/119] installing binutils-2.27-4.28 [ 8s] [10/119] installing cpio-2.11-3.4 [ 8s] [11/119] installing diffutils-3.3-3.2 [ 9s] [12/119] installing findutils-4.3.8-3.45 [ 9s] [13/119] installing hostname-3.12-4.2 [ 9s] [14/119] installing libattr-2.4.47-3.42 [ 9s] [15/119] installing libbz2-1.0.6-4.41 [ 9s] [16/119] installing libcap-2.24-3.39 [ 9s] [17/119] installing libcares-1.10.0-3.2 [ 9s] [18/119] installing libelf-0.153-3.18 [ 9s] [19/119] installing libexpat-2.2.0-3.44 [ 9s] [20/119] installing libext2fs-1.42.13-3.4 [ 9s] [21/119] installing libfreebl3-3.23-3.37 [ 9s] [22/119] installing libgfortran-6.2.1-6.2 [ 9s] [23/119] installing libgomp-6.2.1-6.2 [ 9s] [24/119] installing libgpg-error-1.13-4.46 [ 9s] [25/119] installing libitm-6.2.1-6.2 [ 9s] [26/119] installing libltdl-2.4.2-4.35 [ 9s] [27/119] installing liblua-5.1.4-3.7 [ 9s] [28/119] installing liblzma-5.2.2-3.41 [ 9s] [29/119] installing libpcre-8.39-3.5 [ 9s] [30/119] installing libpopt-1.16-4.8 [ 9s] [31/119] installing libpython-2.7.8-3.26 [ 10s] [32/119] installing libsmack-1.3.0-3.40 [ 10s] [33/119] installing libsmartcols-2.28-3.2 [ 10s] [34/119] installing libsqlite-3.18.0-5.3 [ 10s] [35/119] installing libstdc++-6.2.1-6.2 [ 10s] [36/119] installing libuuid-2.28-3.2 [ 10s] [37/119] installing m4-1.4.17-3.2 [ 10s] [38/119] installing net-tools-2.0_20121208git-3.2 [ 10s] [39/119] installing nghttp2-1.20.0-3.4 [ 10s] [40/119] installing nspr-4.12-3.8 [ 10s] [41/119] installing patch-2.7-3.8 [ 10s] [42/119] installing pkg-config-0.28-4.43 [ 10s] [43/119] installing sed-4.1c-3.2 [ 10s] [44/119] installing update-alternatives-1.18.15-3.2 [ 10s] [45/119] installing which-2.20-6.2 [ 10s] [46/119] installing zlib-1.2.8-3.45 [ 10s] [47/119] installing libncurses-5.9-3.40 [ 10s] [48/119] installing shadow-utils-4.1.4.2-3.3 [ 10s] [49/119] installing build-compare-2015.04.28-3.26 [ 10s] [50/119] installing libstdc++-devel-6.2.1-6.2 [ 11s] [51/119] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 12s] [52/119] installing cpp-6.2.1-6.2 [ 12s] [53/119] installing gcc-c++-6.2.1-6.2 [ 13s] [54/119] installing coreutils-6.9-3.2 [ 13s] [55/119] installing dash-0.5.7-4.2 [ 13s] [56/119] installing db4-4.8.30.NC-3.47 [ 13s] [57/119] installing gawk-3.1.5-3.2 [ 13s] [58/119] installing grep-2.5.2-3.2 [ 13s] [59/119] installing less-466-8.2 [ 13s] [60/119] installing libacl-2.2.52-3.46 [ 13s] [61/119] installing libasm-0.153-3.18 [ 13s] [62/119] installing libblkid-2.28-3.2 [ 13s] [63/119] installing libcc1-6.2.1-6.2 [ 13s] [64/119] installing libgcrypt-1.7.6-4.2 [ 13s] [65/119] installing libopenssl-1.0.2j-3.40 [ 14s] [66/119] installing libreadline-5.2-3.39 [ 14s] [67/119] installing libubsan-6.2.1-6.2 [ 14s] [68/119] installing make-4.0-3.7 [ 14s] [69/119] installing nss-certs-3.23-3.37 [ 14s] [70/119] installing procps-ng-3.3.9-3.3 [ 14s] [71/119] installing smack-1.3.0-3.40 [ 14s] [72/119] installing bzip2-1.0.6-4.41 [ 14s] [73/119] installing libmagic-5.28-4.11 [ 14s] [74/119] installing libxml2-2.9.4-4.39 [ 14s] [75/119] installing xz-5.2.2-3.41 [ 14s] [76/119] installing libdw-0.153-3.18 [ 14s] [77/119] installing linux-glibc-devel-3.10-3.45 [ 14s] [78/119] installing file-5.28-4.11 [ 14s] [79/119] installing glibc-locale-2.24-3.20 [ 15s] [80/119] installing libmount-2.28-3.2 [ 15s] [81/119] installing tar-1.17-3.2 [ 15s] [82/119] installing gzip-1.3.12-3.39 [ 15s] [83/119] installing libfdisk1-2.28-3.2 [ 15s] [84/119] installing libxml2-tools-2.9.4-4.39 [ 15s] [85/119] installing pam-1.1.6-3.3 [ 15s] [86/119] installing perl-5.20.0-4.13 [ 16s] [87/119] installing rsync-3.1.1-1.4 [ 16s] [88/119] installing tzdata-2016i-4.2 [ 16s] [89/119] installing libcurl-7.53.1-1.2 [ 16s] [90/119] installing elfutils-0.153-3.18 [ 16s] [91/119] installing libxslt-1.1.29-3.3 [ 16s] [92/119] installing gcc-6.2.1-6.2 [ 17s] [93/119] installing python-2.7.8-3.26 [ 18s] [94/119] installing build-mkbaselibs-20120927-3.1 [ 18s] [95/119] installing perl-Error-0.17017-2.2 [ 18s] [96/119] installing glibc-devel-2.24-3.20 [ 18s] [97/119] installing qemu-accel-x86_64-armv7l-0.4-3.15 [ 23s] warning: %post(qemu-accel-x86_64-armv7l-0.4-3.15.armv7l) scriptlet failed, exit status 1 [ 23s] [98/119] installing autoconf-2.69-3.48 [ 23s] [99/119] installing libxslt-tools-1.1.29-3.3 [ 23s] [100/119] installing pam-modules-extra-1.1.6-3.3 [ 23s] [101/119] installing python-xml-2.7.8-3.26 [ 23s] [102/119] installing sgml-skel-0.6-3.1 [ 23s] [103/119] installing util-linux-2.28-3.2 [ 23s] [104/119] installing iso_ent-2000.11.03-2.1 [ 23s] [105/119] installing automake-1.14.1-3.32 [ 24s] [106/119] installing util-linux-su-2.28-3.2 [ 24s] [107/119] installing build-20120927-3.1 [ 24s] [108/119] installing xmlcharent-0.3-2.1 [ 24s] [109/119] installing openssh-6.6p1-3.2 [ 24s] Usage: groupadd [options] GROUP [ 24s] [ 24s] Options: [ 24s] -f, --force exit successfully if the group already exists, [ 24s] and cancel -g if the GID is already used [ 24s] -g, --gid GID use GID for the new group [ 24s] -h, --help display this help message and exit [ 24s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 24s] -o, --non-unique allow to create groups with duplicate [ 24s] (non-unique) GID [ 24s] -p, --password PASSWORD use this encrypted password for the new group [ 24s] -r, --system create a system account [ 24s] [ 24s] [110/119] installing libtool-2.4.2-4.35 [ 24s] [111/119] installing docbook_4-4.5-2.1 [ 24s] [112/119] installing git-core-2.0.1-1.11 [ 25s] [113/119] installing git-2.0.1-1.11 [ 25s] [114/119] installing docbook-xsl-stylesheets-1.78.1-2.1 [ 25s] [115/119] installing asciidoc-8.6.6-2.1 [ 26s] [116/119] installing nss-3.23-3.37 [ 26s] [117/119] installing libsoftokn3-3.23-3.37 [ 26s] [118/119] installing rpm-4.11.0.1-4.22 [ 26s] [119/119] installing rpm-build-4.11.0.1-4.22 [ 26s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 26s] now finalizing build dir... [ 27s] build target is armv7l-tizen-linux [ 27s] ----------------------------------------------------------------- [ 27s] I have the following modifications for dracut.spec: [ 27s] 9c9 [ 27s] < Release: 0 [ 27s] --- [ 27s] > Release: 3.4 [ 27s] 256a257 [ 27s] > %changelog [ 27s] ----------------------------------------------------------------- [ 27s] ----- building dracut.spec (user abuild) [ 27s] ----------------------------------------------------------------- [ 27s] ----------------------------------------------------------------- [ 27s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/bdf4bc6c191a364c6a609eb310c8d80f-dracut' -ba /home/abuild/rpmbuild/SOURCES/dracut.spec [ 27s] Building target platforms: armv7l-tizen-linux [ 27s] Building for target armv7l-tizen-linux [ 27s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.hugVc9 [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + rm -rf dracut-032 [ 27s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 27s] + /bin/tar -xf - [ 27s] + STATUS=0 [ 27s] + '[' 0 -ne 0 ']' [ 27s] + cd dracut-032 [ 27s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 27s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 27s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 27s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 27s] + /bin/patch -p1 --fuzz=2 [ 27s] patching file Makefile [ 27s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 27s] + exit 0 [ 27s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.gjcr6T [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd dracut-032 [ 27s] ++ uname -m [ 27s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 27s] + LANG=C [ 27s] + export LANG [ 27s] + unset DISPLAY [ 27s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 27s] + export CFLAGS [ 27s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 27s] + export CXXFLAGS [ 27s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 27s] + export FFLAGS [ 27s] + LDFLAGS= [ 27s] + export LDFLAGS [ 27s] + LD_AS_NEEDED=1 [ 27s] + export LD_AS_NEEDED [ 27s] + make all [ 27s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 27s] install/dracut-install.c: In function 'resolve_deps': [ 27s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 27s] read(fd, buf, LINE_MAX); [ 27s] ^~~~~~~~~~~~~~~~~~~~~~~ [ 27s] install/dracut-install.c: In function 'cp': [ 27s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 27s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 27s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 27s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 27s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 28s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 28s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 28s] ln -fs install/dracut-install dracut-install [ 28s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 33s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 34s] Note: Writing lsinitrd.1 [ 34s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 43s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 44s] Note: Writing dracut.conf.5 [ 44s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 72s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 72s] Note: Writing dracut.cmdline.7 [ 72s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 77s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 77s] Note: Writing dracut.bootup.7 [ 77s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 97s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 97s] Note: Writing dracut.8 [ 97s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 103s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 103s] Note: Writing dracut-catimages.8 [ 103s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 109s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 110s] Note: Writing mkinitrd.8 [ 110s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 114s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 115s] Note: Writing dracut-cmdline.service.8 [ 115s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 119s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 120s] Note: Writing dracut-initqueue.service.8 [ 120s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 124s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 125s] Note: Writing dracut-mount.service.8 [ 125s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 130s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 130s] Note: Writing dracut-shutdown.service.8 [ 130s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 135s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 136s] Note: Writing dracut-pre-mount.service.8 [ 136s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 140s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 141s] Note: Writing dracut-pre-pivot.service.8 [ 141s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 145s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 146s] Note: Writing dracut-pre-trigger.service.8 [ 146s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 150s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 151s] Note: Writing dracut-pre-udev.service.8 [ 151s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 227s] xsltproc -o dracut.html --xinclude -nonet \ [ 227s] --stringparam html.stylesheet \ [ 227s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 227s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 227s] rm -f -- dracut.xml [ 227s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 227s] + exit 0 [ 227s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.w4R2OL [ 227s] + umask 022 [ 227s] + cd /home/abuild/rpmbuild/BUILD [ 227s] + cd dracut-032 [ 227s] + LANG=C [ 227s] + export LANG [ 227s] + unset DISPLAY [ 227s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm [ 227s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm [ 227s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 227s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut [ 227s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/bin [ 227s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/etc [ 227s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/modules.d [ 227s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man8 [ 227s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/bin/dracut [ 227s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/bin/dracut-catimages [ 227s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/bin/mkinitrd [ 227s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/bin/lsinitrd [ 227s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/etc/dracut.conf [ 227s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/etc/dracut.conf.d [ 227s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut.conf.d [ 227s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut-functions.sh [ 227s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut-version.sh [ 227s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut-functions [ 227s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut-logger.sh [ 227s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut-initramfs-restore [ 227s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut [ 227s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man1/${i##*/}; done [ 227s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man5/${i##*/}; done [ 227s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man7/${i##*/}; done [ 227s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man8/${i##*/}; done [ 228s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/man/man7/dracut.kernel.7 [ 228s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 228s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/systemd/system; \ [ 228s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 228s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/systemd/system/shutdown.target.wants; \ [ 228s] ln -s ../dracut-shutdown.service \ [ 228s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 228s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/systemd/system/initrd.target.wants; \ [ 228s] for i in \ [ 228s] dracut-cmdline.service \ [ 228s] dracut-initqueue.service \ [ 228s] dracut-mount.service \ [ 228s] dracut-pre-mount.service \ [ 228s] dracut-pre-pivot.service \ [ 228s] dracut-pre-trigger.service \ [ 228s] dracut-pre-udev.service \ [ 228s] ; do \ [ 228s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 228s] ln -s ../$i \ [ 228s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 228s] done \ [ 228s] fi [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] if [ -f install/dracut-install ]; then \ [ 228s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut-install; \ [ 228s] fi [ 228s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/kernel/install.d [ 228s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/kernel/install.d/50-dracut.install [ 228s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/kernel/install.d/51-dracut-rescue.install [ 228s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/bash-completion/completions [ 228s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/bash-completion/completions/dracut [ 228s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/bash-completion/completions/lsinitrd [ 228s] + echo DRACUT_VERSION=032-3.4 [ 228s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm//usr/lib/dracut/modules.d/01fips [ 228s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm//usr/lib/dracut/modules.d/02fips-aesni [ 228s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm//usr/lib/dracut/modules.d/50gensplash [ 228s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm//usr/lib/dracut/modules.d/96securityfs [ 228s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm//usr/lib/dracut/modules.d/97masterkey [ 228s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm//usr/lib/dracut/modules.d/98integrity [ 228s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm//usr/lib/dracut/modules.d/98selinux [ 228s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/boot/dracut [ 228s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/var/lib/dracut/overlay [ 228s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/var/log [ 228s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/var/log/dracut.log [ 228s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/com/initramfs [ 228s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/etc/dracut.conf.d/01-dist.conf [ 228s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/etc/logrotate.d [ 228s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/etc/logrotate.d/dracut_log [ 228s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 228s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/lib/dracut/dracut-install [ 233s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 233s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 233s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 233s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 233s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 233s] 195 blocks [ 233s] + /usr/lib/rpm/check-buildroot [ 233s] + /usr/lib/rpm//brp-compress [ 233s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 234s] + /usr/lib/rpm/brp-python-hardlink [ 234s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm [ 234s] Processing files: dracut-032-3.4.armv7l [ 234s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 234s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 234s] [ 234s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.jHkEQU [ 234s] + umask 022 [ 234s] + cd /home/abuild/rpmbuild/BUILD [ 234s] + cd dracut-032 [ 234s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/licenses/dracut [ 234s] + export LICENSEDIR [ 234s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/licenses/dracut [ 234s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm/usr/share/licenses/dracut [ 234s] + exit 0 [ 235s] Provides: config(dracut) = 032-3.4 dracut = 032-3.4 dracut(armv7l-32) = 032-3.4 [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Requires: /bin/bash /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.5) [ 235s] Conflicts: systemd < 187 [ 235s] Processing files: dracut-debugsource-032-3.4.armv7l [ 235s] Provides: dracut-debugsource = 032-3.4 dracut-debugsource(armv7l-32) = 032-3.4 [ 235s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 235s] Processing files: dracut-network-032-3.4.armv7l [ 235s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 235s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 235s] [ 235s] Provides: dracut-network = 032-3.4 dracut-network(armv7l-32) = 032-3.4 [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Requires: /bin/bash /bin/sh [ 235s] Processing files: dracut-caps-032-3.4.armv7l [ 235s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 235s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 235s] [ 235s] Provides: dracut-caps = 032-3.4 dracut-caps(armv7l-32) = 032-3.4 [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Requires: /bin/bash [ 235s] Processing files: dracut-tools-032-3.4.armv7l [ 235s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 235s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 235s] [ 235s] Provides: dracut-tools = 032-3.4 dracut-tools(armv7l-32) = 032-3.4 [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Requires: /bin/bash [ 235s] Processing files: dracut-debuginfo-032-3.4.armv7l [ 235s] Provides: dracut-debuginfo = 032-3.4 dracut-debuginfo(armv7l-32) = 032-3.4 [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm [ 235s] warning: Could not canonicalize hostname: obspw02 [ 235s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-3.4.src.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-032-3.4.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-debugsource-032-3.4.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-network-032-3.4.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-caps-032-3.4.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-tools-032-3.4.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/dracut-debuginfo-032-3.4.armv7l.rpm [ 235s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.25sFir [ 235s] + umask 022 [ 235s] + cd /home/abuild/rpmbuild/BUILD [ 235s] + cd dracut-032 [ 235s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.4.arm [ 235s] + exit 0 [ 235s] ... checking for files with abuild user/group [ 235s] ... creating baselibs [ 236s] ... comparing built packages with the former built [ 236s] /usr/lib/build/pkg-diff.sh [ 236s] compare /.build.oldpackages/dracut-032-3.3.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-3.4.src.rpm [ 236s] This is not a prerelease project. Compare the project name. [ 236s] comparing rpmtags [ 236s] comparing RELEASE [ 236s] comparing PROVIDES [ 236s] comparing scripts [ 236s] comparing filelist [ 236s] comparing file checksum [ 236s] RPM meta information is identical [ 236s] compare /.build.oldpackages/dracut-032-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/dracut-032-3.4.armv7l.rpm [ 236s] Comparing dracut-032-3.3.armv7l.rpm to dracut-032-3.4.armv7l.rpm [ 236s] This is not a prerelease project. Compare the project name. [ 236s] comparing rpmtags [ 236s] comparing RELEASE [ 237s] comparing PROVIDES [ 237s] comparing scripts [ 237s] comparing filelist [ 237s] comparing file checksum [ 237s] creating rename script [ 237s] RPM file checksum differs. [ 237s] Extracting packages [ 237s] /usr/lib/dracut/dracut-install differs in assembler output [ 237s] --- /tmp/tmp.FNjM127220/tmp.iRJU127319 2017-05-20 00:55:25.271837881 +0000 [ 237s] +++ /tmp/tmp.FNjM127220/tmp.gcWP127321 2017-05-20 00:55:25.287837942 +0000 [ 237s] @@ -16,344 +16,344 @@ [ 237s] ldr lr, [pc, # ] ; [ 237s] add lr, pc, lr [ 237s] ldr pc, [lr, # ]! [ 237s] - andeq r6, r1, r8, ror r1 [ 237s] + andeq r5, r1, r8, ror r1 [ 237s] [ 237s] calloc@plt: [ 237s] ; instruction: 0x46c04778 [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x174 [ 237s] [ 237s] strstr@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x16c [ 237s] [ 237s] raise@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x164 [ 237s] [ 237s] __getdelim@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x15c [ 237s] [ 237s] strcmp@plt: [ 237s] ; instruction: 0x46c04778 [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x150 [ 237s] [ 237s] read@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x148 [ 237s] [ 237s] free@plt: [ 237s] ; instruction: 0x46c04778 [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x13c [ 237s] [ 237s] _exit@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x134 [ 237s] [ 237s] __vsnprintf_chk@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x12c [ 237s] [ 237s] memcpy@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x124 [ 237s] [ 237s] execlp@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x11c [ 237s] [ 237s] memcmp@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x114 [ 237s] [ 237s] stpcpy@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x10c [ 237s] [ 237s] __stack_chk_fail@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x104 [ 237s] [ 237s] sysconf@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xfc [ 237s] [ 237s] unlink@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xf4 [ 237s] [ 237s] __strndup@plt: [ 237s] ; instruction: 0x46c04778 [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xe8 [ 237s] [ 237s] ioctl@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xe0 [ 237s] [ 237s] usleep@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xd8 [ 237s] [ 237s] waitpid@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xd0 [ 237s] [ 237s] strcpy@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xc8 [ 237s] [ 237s] open64@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xc0 [ 237s] [ 237s] __asprintf_chk@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xb8 [ 237s] [ 237s] getenv@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xb0 [ 237s] [ 237s] puts@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xa8 [ 237s] [ 237s] malloc@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0xa0 [ 237s] [ 237s] __libc_start_main@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x98 [ 237s] [ 237s] strerror@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x90 [ 237s] [ 237s] dirname@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x88 [ 237s] [ 237s] __gmon_start__@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x80 [ 237s] [ 237s] getopt_long@plt: [ 237s] add ip, pc, # , 12 [ 237s] - add ip, ip, # ; 0x16000 [ 237s] + add ip, ip, # ; 0x15000 [ 237s] ldr pc, [ip, # ]! ; 0x78 [ 237s] [ 237s] __ctype_b_loc@plt: [ 237s] /usr/lib/dracut/dracut-install differs in ELF section .dynsym [ 237s] --- /tmp/tmp.FNjM127220/tmp.iRJU127319 2017-05-20 00:55:25.331838108 +0000 [ 237s] +++ /tmp/tmp.FNjM127220/tmp.gcWP127321 2017-05-20 00:55:25.335838123 +0000 [ 237s] @@ -7,20 +7,20 @@ [ 237s] 10410 75010000 00000000 00000000 12000000 u............... [ 237s] 10420 99010000 00000000 00000000 12000000 ................ [ 237s] 10430 00020000 00000000 00000000 12000000 ................ [ 237s] - 10440 f5020000 30720200 04000000 11001a00 ....0r.......... [ 237s] + 10440 f5020000 30620200 04000000 11001a00 ....0b.......... [ 237s] 10450 70020000 00000000 00000000 12000000 p............... [ 237s] 10460 b0020000 00000000 00000000 12000000 ................ [ 237s] 10470 0f000000 00000000 00000000 20000000 ............ ... [ 237s] 10480 b8010000 00000000 00000000 12000000 ................ [ 237s] 10490 f0020000 00000000 00000000 12000000 ................ [ 237s] - 104a0 0e030000 38720200 04000000 11001a00 ....8r.......... [ 237s] + 104a0 0e030000 38620200 04000000 11001a00 ....8b.......... [ 237s] 104b0 38010000 00000000 00000000 12000000 8............... [ 237s] 104c0 d2010000 00000000 00000000 12000000 ................ [ 237s] 104d0 cb010000 00000000 00000000 12000000 ................ [ 237s] 104e0 6e010000 00000000 00000000 12000000 n............... [ 237s] 104f0 bd010000 00000000 00000000 12000000 ................ [ 237s] 10500 e1020000 00000000 00000000 12000000 ................ [ 237s] - 10510 e7000000 3c720200 04000000 11001a00 ................... [ 237s] - 107d0 8a020000 30720200 04000000 21001a00 ....0r......!... [ 237s] + 107d0 8a020000 30620200 04000000 21001a00 ....0b......!... [ 237s] 107e0 4e000000 00000000 00000000 20000000 N........... ... [ 237s] 107f0 f1010000 00000000 00000000 12000000 ................ [ 237s] - 10800 3a020000 40720200 04000000 11001a00 :...@r.......... [ 237s] + 10800 3a020000 40620200 04000000 11001a00 :...@b.......... [ 237s] 10810 1b020000 00000000 00000000 12000000 ................ [ 237s] 10820 5a010000 00000000 00000000 12000000 Z............... [ 237s] 10830 ab000000 00000000 00000000 12000000 ................ [ 237s] /usr/lib/dracut/dracut-install differs in ELF section .rel.dyn [ 237s] --- /tmp/tmp.FNjM127220/tmp.iRJU127319 2017-05-20 00:55:25.351838183 +0000 [ 237s] +++ /tmp/tmp.FNjM127220/tmp.gcWP127321 2017-05-20 00:55:25.355838198 +0000 [ 237s] @@ -2,6 +2,6 @@ [ 237s] /usr/lib/dracut/dracut-install: file format elf32-littlearm [ 237s] [ 237s] Contents of section .rel.dyn: [ 237s] - 10d40 14720200 15230000 30720200 14050000 .r...#..0r...... [ 237s] - 10d50 38720200 140b0000 3c720200 14120000 8r......2E..a. [ 237s] + 11a50 059944f6 082244f2 dc23c0f2 0102c0f2 ..D.."D..#...... [ 237s] + 11a60 01030092 019140f2 3e3244f6 bc110720 ......@.>2D.... [ 237s] 11a70 c0f20101 01f05aff 0598fff7 b4ea0597 ......Z......... [ 237s] 11a80 baf1000f bed00024 4846fff7 acea2046 .......$HF.... F [ 237s] - 11a90 20b0bde8 f087059c 002cf5d0 45f22472 ........,..E.$r [ 237s] - 11aa0 44f6e873 c0f20102 45f2c861 0092c0f2 D..s....E..a.... [ 237s] + 11a90 20b0bde8 f087059c 002cf5d0 44f61822 ........,..D.." [ 237s] + 11aa0 44f2dc23 c0f20102 44f6bc11 0092c0f2 D..#....D....... [ 237s] 11ab0 01030294 40f24932 0196c0f2 01010720 ....@.I2....... [ 237s] 11ac0 01f034ff 4846059c fff78cea 204620b0 ..4.HF...... F . [ 237s] - 11ad0 bde8f087 814645f2 e46244f6 e873c0f2 .....FE..bD..s.. [ 237s] - 11ae0 010245f2 c8610092 c0f20103 40f21e32 ..E..a......@..2 [ 237s] + 11ad0 bde8f087 814644f6 d81244f2 dc23c0f2 .....FD...D..#.. [ 237s] + 11ae0 010244f6 bc110092 c0f20103 40f21e32 ..D.........@..2 [ 237s] 11af0 c0f20101 032001f0 19ff0120 fff716eb ..... ..... .... [ 237s] - 11b00 45f2f462 44f6e873 c0f20102 45f2c861 E..bD..s....E..a [ 237s] + 11b00 44f6e812 44f2dc23 c0f20102 44f6bc11 D...D..#....D... [ 237s] 11b10 0092c0f2 010340f2 3732c0f2 01010320 ......@.72..... [ 237s] 11b20 01f004ff e9e70446 4846fff7 5cea2046 .......FHF..\. F [ 237s] - 11b30 fff78eeb 45f2f462 44f6e873 c0f20102 ....E..bD..s.... [ 237s] - 11b40 45f2c861 0092c0f2 010340f2 2532c0f2 E..a......@.%2.. [ 237s] + 11b30 fff78eeb 44f6e812 44f2dc23 c0f20102 ....D...D..#.... [ 237s] + 11b40 44f6bc11 0092c0f2 010340f2 2532c0f2 D.........@.%2.. [ 237s] 11b50 01010320 01f0eafe cfe700bf 2de9f04f ... ........-..O [ 237s] - 11b60 adf5804d 87b047f2 3823c0f2 02030df5 ...M..G.8#...... [ 237s] + 11b60 adf5804d 87b046f2 3823c0f2 02030df5 ...M..F.8#...... [ 237s] 11b70 80420393 14321b68 05460846 88460027 .B...2.h.F.F.F.' [ 237s] /usr/lib/dracut/dracut-install differs in ELF section .rodata [ 237s] --- /tmp/tmp.FNjM127220/tmp.iRJU127319 2017-05-20 00:55:25.395838350 +0000 [ 237s] +++ /tmp/tmp.FNjM127220/tmp.gcWP127321 2017-05-20 00:55:25.395838350 +0000 [ 237s] @@ -2,612 +2,295 @@ [ 237s] /usr/lib/dracut/dracut-install: file format elf32-littlearm [ 237s] [ 237s] Contents of section .rodata: [ 237s] - 142d8 01000200 61726d32 00000000 61726d32 ....arm2....arm2 [ 237s] - 142e8 35300000 61726d33 00000000 61726d36 50..arm3....arm6 [ 237s] - 142f8 00000000 61726d36 30000000 61726d36 ....arm60...arm6 [ 237s] - 14308 30300000 61726d36 31300000 61726d36 00..arm610..arm6 [ 237s] - 14318 32300000 61726d37 00000000 61726d37 20..arm7....arm7 [ 237s] - 14328 64000000 61726d37 64690000 61726d37 d...arm7di..arm7 [ 237s] - 14338 30000000 61726d37 30300000 61726d37 0...arm700..arm7 [ 237s] - 14348 30306900 61726d37 31300000 61726d37 00i.arm710..arm7 [ 237s] - 14358 32300000 61726d37 31306300 61726d37 20..arm710c.arm7 [ 237s] - 14368 31303000 61726d37 35303000 61726d37 100.arm7500.arm7 [ 237s] - 14378 35303066 65000000 61726d37 6d000000 500fe...arm7m... [ 237s] - 14388 61726d37 646d0000 61726d37 646d6900 arm7dm..arm7dmi. [ 237s] - 14398 61726d38 00000000 61726d38 31300000 arm8....arm810.. [ 237s] - 143a8 7374726f 6e676172 6d000000 7374726f strongarm...stro [ 237s] - 143b8 6e676172 6d313130 00000000 7374726f ngarm110....stro [ 237s] - 143c8 6e676172 6d313130 30000000 7374726f ngarm1100...stro [ 237s] - 143d8 6e676172 6d313131 30000000 66613532 ngarm1110...fa52 [ 237s] - 143e8 36000000 66613632 36000000 61726d37 6...fa626...arm7 [ 237s] - 143f8 74646d69 00000000 61726d37 74646d69 tdmi....arm7tdmi [ 237s] - 14408 2d730000 61726d37 31307400 61726d37 -s..arm710t.arm7 [ 237s] - 14418 32307400 61726d37 34307400 61726d39 20t.arm740t.arm9 [ 237s] - 14428 00000000 61726d39 74646d69 00000000 ....arm9tdmi.... [ 237s] - 14438 61726d39 32300000 61726d39 32307400 arm920..arm920t. [ 237s] - 14448 61726d39 32327400 61726d39 34307400 arm922t.arm940t. [ 237s] - 14458 65703933 31320000 61726d31 3074646d ep9312..arm10tdm [ 237s] - 14468 69000000 61726d31 30323074 00000000 i...arm1020t.... [ 237s] - 14478 61726d39 65000000 61726d39 3436652d arm9e...arm946e- [ 237s] - 14488 73000000 61726d39 3636652d 73000000 s...arm966e-s... [ 237s] - 14498 61726d39 3638652d 73000000 61726d31 arm968e-s...arm1 [ 237s] - 144a8 30650000 61726d31 30323065 00000000 0e..arm1020e.... [ 237s] - 144b8 61726d31 30323265 00000000 78736361 arm1022e....xsca [ 237s] - 144c8 6c650000 69776d6d 78740000 69776d6d le..iwmmxt..iwmm [ 237s] - 144d8 78743200 66613630 36746500 66613632 xt2.fa606te.fa62 [ 237s] - 144e8 36746500 666d7036 32360000 66613732 6te.fmp626..fa72 [ 237s] - 144f8 36746500 61726d39 3236656a 2d730000 6te.arm926ej-s.. [ 237s] - 14508 61726d31 30323665 6a2d7300 61726d31 arm1026ej-s.arm1 [ 237s] - 14518 3133366a 2d730000 61726d31 3133366a 136j-s..arm1136j [ 237s] - 14528 662d7300 61726d31 3137366a 7a2d7300 f-s.arm1176jz-s. [ 237s] - 14538 61726d31 3137366a 7a662d73 00000000 arm1176jzf-s.... [ 237s] - 14548 6d70636f 72656e6f 76667000 6d70636f mpcorenovfp.mpco [ 237s] - 14558 72650000 61726d31 31353674 322d7300 re..arm1156t2-s. [ 237s] - 14568 61726d31 31353674 32662d73 00000000 arm1156t2f-s.... [ 237s] - 14578 636f7274 65782d6d 31000000 636f7274 cortex-m1...cort [ 237s] - 14588 65782d6d 30000000 636f7274 65782d6d ex-m0...cortex-m [ 237s] - 14598 30706c75 73000000 636f7274 65782d6d 0plus...cortex-m [ 237s] - 145a8 312e736d 616c6c2d 6d756c74 69706c79 1.small-multiply [ 237s] - 145b8 00000000 636f7274 65782d6d 302e736d ....cortex-m0.sm [ 237s] - 145c8 616c6c2d 6d756c74 69706c79 00000000 all-multiply.... [ 237s] - 145d8 636f7274 65782d6d 30706c75 732e736d cortex-m0plus.sm [ 237s] - 145e8 616c6c2d 6d756c74 69706c79 00000000 all-multiply.... [ 237s] - 145f8 67656e65 7269632d 61726d76 372d6100 generic-armv7-a. [ 237s] - 14608 636f7274 65782d61 35000000 636f7274 cortex-a5...cort [ 237s] - 14618 65782d61 37000000 636f7274 65782d61 ex-a7...cortex-a [ 237s] - 14628 38000000 636f7274 65782d61 39000000 8...cortex-a9... [ 237s] - 14638 636f7274 65782d61 31320000 636f7274 cortex-a12..cort [ 237s] - 14648 65782d61 31350000 636f7274 65782d61 ex-a15..cortex-a [ 237s] - 14658 31370000 636f7274 65782d72 34000000 17..cortex-r4... [ 237s] - 14668 636f7274 65782d72 34660000 636f7274 cortex-r4f..cort [ 237s] - 14678 65782d72 35000000 636f7274 65782d72 ex-r5...cortex-r [ 237s] - 14688 37000000 636f7274 65782d72 38000000 7...cortex-r8... [ 237s] - 14698 636f7274 65782d6d 37000000 636f7274 cortex-m7...cort [ 237s] - 146a8 65782d6d 34000000 636f7274 65782d6d ex-m4...cortex-m [ 237s] - 146b8 33000000 6d617276 656c6c2d 706a3400 3...marvell-pj4. [ 237s] - 146c8 636f7274 65782d61 31352e63 6f727465 cortex-a15.corte [ 237s] - 146d8 782d6137 00000000 636f7274 65782d61 x-a7....cortex-a [ 237s] - 146e8 31372e63 6f727465 782d6137 00000000 17.cortex-a7.... [ 237s] - 146f8 636f7274 65782d6d 32330000 636f7274 cortex-m23..cort [ 237s] - 14708 65782d61 33320000 636f7274 65782d6d ex-a32..cortex-m [ 237s] - 14718 33330000 636f7274 65782d61 33350000 33..cortex-a35.. [ 237s] - 14728 636f7274 65782d61 35330000 636f7274 cortex-a53..cort [ 237s] - 14738 65782d61 35370000 636f7274 65782d61 ex-a57..cortex-a [ 237s] - 14748 37320000 636f7274 65782d61 37330000 72..cortex-a73.. [ 237s] - 14758 6578796e 6f732d6d 31000000 71646632 exynos-m1...qdf2 [ 237s] - 14768 34787800 7867656e 65310000 636f7274 4xx.xgene1..cort [ 237s] - 14778 65782d61 35372e63 6f727465 782d6135 ex-a57.cortex-a5 [ 237s] - 14788 33000000 636f7274 65782d61 37322e63 3...cortex-a72.c [ 237s] - 14798 6f727465 782d6135 33000000 636f7274 ortex-a53...cort [ 237s] - 147a8 65782d61 37332e63 6f727465 782d6133 ex-a73.cortex-a3 [ 237s] - 147b8 35000000 636f7274 65782d61 37332e63 5...cortex-a73.c [ 237s] - 147c8 6f727465 782d6135 33000000 61726d76 ortex-a53...armv [ 237s] - 147d8 32000000 61726d76 32610000 61726d76 2...armv2a..armv [ 237s] - 147e8 33000000 61726d76 336d0000 61726d76 3...armv3m..armv [ 237s] - 147f8 34000000 61726d76 34740000 61726d76 4...armv4t..armv [ 237s] - 14808 35000000 61726d76 35740000 61726d76 5...armv5t..armv [ 237s] - 14818 35650000 61726d76 35746500 61726d76 5e..armv5te.armv [ 237s] - 14828 36000000 61726d76 366a0000 61726d76 6...armv6j..armv [ 237s] - 14838 366b0000 61726d76 367a0000 61726d76 6k..armv6z..armv [ 237s] - 14848 366b7a00 61726d76 367a6b00 61726d76 6kz.armv6zk.armv [ 237s] - 14858 36743200 61726d76 362d6d00 61726d76 6t2.armv6-m.armv [ 237s] - 14868 36732d6d 00000000 61726d76 37000000 6s-m....armv7... [ 237s] - 14878 61726d76 37766500 61726d76 372d7200 armv7ve.armv7-r. [ 237s] - 14888 61726d76 372d6d00 61726d76 37652d6d armv7-m.armv7e-m [ 237s] - 14898 00000000 61726d76 382d6100 61726d76 ....armv8-a.armv [ 237s] - 148a8 382d612b 63726300 61726d76 382e312d 8-a+crc.armv8.1- [ 237s] - 148b8 61000000 61726d76 382e312d 612b6372 a...armv8.1-a+cr [ 237s] - 148c8 63000000 61726d76 382e322d 61000000 c...armv8.2-a... [ 237s] - 148d8 61726d76 382e322d 612b6670 31360000 armv8.2-a+fp16.. [ 237s] - 148e8 61726d76 382d6d2e 62617365 00000000 armv8-m.base.... [ 237s] - 148f8 61726d76 382d6d2e 6d61696e 00000000 armv8-m.main.... [ 237s] - 14908 61726d76 382d6d2e 6d61696e 2b647370 armv8-m.main+dsp [ 237s] - 14918 00000000 dc420100 05000200 00000000 .....B.......... [ 237s] - 14928 e4420100 05000200 00000000 ec420100 .B...........B.. [ 237s] - 14938 05000200 00000000 f4420100 0d000200 .........B...... [ 237s] - 14948 00000000 fc420100 0d000200 00000000 .....B.......... [ 237s] - 14958 04430100 0d400200 00000000 0c430100 .C...@.......C.. [ 237s] - 14968 0c400200 00000000 14430100 0d400200 .@.......C...@.. [ 237s] - 14978 00000000 1c430100 0d000200 00000000 .....C.......... [ 237s] - 14988 24430100 0d000200 00000000 2c430100 $C..........,C.. [ 237s] - 14998 0d000200 00000000 34430100 0d000200 ........4C...... [ 237s] - 149a8 00000000 3c430100 0d400200 00000000 ....