[ 0s] Memory limit set to 87947400KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] [ 0s] [ 0s] obspw06 started "build _service:gbs:dracut.spec" at Fri May 19 22:48:55 UTC 2017. [ 0s] [ 0s] Building dracut for project 'Tizen:Unified' repository 'standard' arch 'x86_64' srcmd5 'bdf4bc6c191a364c6a609eb310c8d80f' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 1s] [32/35] preinstalling util-linux-su... [ 1s] [33/35] preinstalling nss... [ 2s] [34/35] preinstalling libsoftokn3... [ 2s] [35/35] preinstalling rpm... [ 2s] [ 2s] running setup postinstall script [ 2s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 2s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 2s] initializing rpm db... [ 2s] reordering...cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] done [ 2s] [1/119] installing libmagic-data-5.28-4.8 [ 2s] [2/119] installing setup-0.9-3.20 [ 2s] [3/119] installing terminfo-base-5.9-3.42 [ 2s] [4/119] installing filesystem-3.1-3.2 [ 2s] [5/119] installing glibc-2.24-3.17 [ 2s] [6/119] installing bash-3.2.57-4.2 [ 3s] [7/119] installing binutils-2.27-4.35 [ 3s] [8/119] installing cpio-2.11-3.4 [ 3s] [9/119] installing diffutils-3.3-3.2 [ 3s] [10/119] installing findutils-4.3.8-3.41 [ 3s] [11/119] installing hostname-3.12-4.1 [ 3s] [12/119] installing libatomic-6.2.1-6.4 [ 3s] [13/119] installing libattr-2.4.47-3.39 [ 3s] [14/119] installing libbz2-1.0.6-4.38 [ 3s] [15/119] installing libcap-2.24-3.36 [ 3s] [16/119] installing libcares-1.10.0-3.1 [ 3s] [17/119] installing libelf-0.153-3.25 [ 3s] [18/119] installing libexpat-2.2.0-3.43 [ 3s] [19/119] installing libext2fs-1.42.13-3.4 [ 3s] [20/119] installing libfreebl3-3.23-3.35 [ 3s] [21/119] installing libgcc-6.2.1-6.4 [ 3s] [22/119] installing libgomp-6.2.1-6.4 [ 3s] [23/119] installing libgpg-error-1.13-4.53 [ 3s] [24/119] installing libitm-6.2.1-6.4 [ 3s] [25/119] installing libltdl-2.4.2-4.38 [ 3s] [26/119] installing liblua-5.1.4-3.7 [ 3s] [27/119] installing liblzma-5.2.2-3.37 [ 4s] [28/119] installing libpcre-8.39-3.4 [ 4s] [29/119] installing libpopt-1.16-4.8 [ 4s] [30/119] installing libpython-2.7.8-3.28 [ 4s] [31/119] installing libquadmath-6.2.1-6.4 [ 4s] [32/119] installing libsmack-1.3.0-3.36 [ 4s] [33/119] installing libsmartcols-2.28-3.2 [ 4s] [34/119] installing libsqlite-3.18.0-5.2 [ 4s] [35/119] installing libuuid-2.28-3.2 [ 4s] [36/119] installing m4-1.4.17-3.2 [ 4s] [37/119] installing net-tools-2.0_20121208git-3.2 [ 4s] [38/119] installing nghttp2-1.20.0-3.4 [ 4s] [39/119] installing nspr-4.12-3.8 [ 4s] [40/119] installing patch-2.7-3.8 [ 4s] [41/119] installing pkg-config-0.28-4.39 [ 4s] [42/119] installing sed-4.1c-3.1 [ 4s] [43/119] installing update-alternatives-1.18.15-3.2 [ 4s] [44/119] installing which-2.20-6.1 [ 4s] [45/119] installing zlib-1.2.8-3.42 [ 4s] [46/119] installing libncurses-5.9-3.42 [ 4s] [47/119] installing shadow-utils-4.1.4.2-3.3 [ 4s] [48/119] installing build-compare-2015.04.28-3.33 [ 4s] [49/119] installing coreutils-6.9-3.2 [ 4s] [50/119] installing cpp-6.2.1-6.4 [ 5s] [51/119] installing dash-0.5.7-4.2 [ 5s] [52/119] installing gawk-3.1.5-3.2 [ 5s] [53/119] installing gcc-c++-6.2.1-6.4 [ 6s] [54/119] installing grep-2.5.2-3.2 [ 6s] [55/119] installing less-466-8.2 [ 6s] [56/119] installing libacl-2.2.52-3.45 [ 6s] [57/119] installing libasm-0.153-3.25 [ 6s] [58/119] installing libblkid-2.28-3.2 [ 6s] [59/119] installing libgcrypt-1.7.6-4.1 [ 6s] [60/119] installing libopenssl-1.0.2j-3.38 [ 6s] [61/119] installing libreadline-5.2-3.39 [ 6s] [62/119] installing libstdc++-6.2.1-6.4 [ 7s] [63/119] installing make-4.0-3.7 [ 7s] [64/119] installing nss-certs-3.23-3.35 [ 7s] [65/119] installing procps-ng-3.3.9-3.3 [ 7s] [66/119] installing smack-1.3.0-3.36 [ 7s] [67/119] installing bzip2-1.0.6-4.38 [ 7s] [68/119] installing libgfortran-6.2.1-6.4 [ 7s] [69/119] installing libmagic-5.28-4.8 [ 7s] [70/119] installing libxml2-2.9.4-4.39 [ 7s] [71/119] installing xz-5.2.2-3.37 [ 7s] [72/119] installing libdw-0.153-3.25 [ 7s] [73/119] installing libstdc++-devel-6.2.1-6.4 [ 7s] [74/119] installing file-5.28-4.8 [ 7s] [75/119] installing libmount-2.28-3.2 [ 7s] [76/119] installing linux-glibc-devel-3.10-3.41 [ 7s] [77/119] installing tar-1.17-3.2 [ 7s] [78/119] installing db4-4.8.30.NC-3.42 [ 8s] [79/119] installing glibc-locale-2.24-3.17 [ 8s] [80/119] installing gzip-1.3.12-3.36 [ 8s] [81/119] installing libcc1-6.2.1-6.4 [ 8s] [82/119] installing libcilkrts-6.2.1-6.4 [ 8s] [83/119] installing libfdisk1-2.28-3.2 [ 8s] [84/119] installing libubsan-6.2.1-6.4 [ 8s] [85/119] installing libxml2-tools-2.9.4-4.39 [ 8s] [86/119] installing pam-1.1.6-3.3 [ 8s] [87/119] installing rsync-3.1.1-1.4 [ 8s] [88/119] installing tzdata-2016i-4.2 [ 8s] [89/119] installing libcurl-7.53.1-1.2 [ 8s] [90/119] installing elfutils-0.153-3.25 [ 8s] [91/119] installing libxslt-1.1.29-3.3 [ 8s] [92/119] installing glibc-devel-2.24-3.17 [ 9s] [93/119] installing libxslt-tools-1.1.29-3.3 [ 9s] [94/119] installing pam-modules-extra-1.1.6-3.3 [ 9s] [95/119] installing perl-5.20.0-4.19 [ 10s] [96/119] installing sgml-skel-0.6-3.1 [ 10s] [97/119] installing python-2.7.8-3.28 [ 11s] [98/119] installing gcc-6.2.1-6.4 [ 12s] [99/119] installing util-linux-2.28-3.2 [ 12s] [100/119] installing build-mkbaselibs-20120927-3.1 [ 12s] [101/119] installing perl-Error-0.17017-2.2 [ 12s] [102/119] installing iso_ent-2000.11.03-2.1 [ 12s] [103/119] installing autoconf-2.69-3.44 [ 12s] [104/119] installing python-xml-2.7.8-3.28 [ 12s] [105/119] installing util-linux-su-2.28-3.2 [ 12s] [106/119] installing xmlcharent-0.3-2.1 [ 12s] [107/119] installing openssh-6.6p1-3.2 [ 12s] Usage: groupadd [options] GROUP [ 12s] [ 12s] Options: [ 12s] -f, --force exit successfully if the group already exists, [ 12s] and cancel -g if the GID is already used [ 12s] -g, --gid GID use GID for the new group [ 12s] -h, --help display this help message and exit [ 12s] -K, --key KEY=VALUE override /etc/login.defs defaults [ 12s] -o, --non-unique allow to create groups with duplicate [ 12s] (non-unique) GID [ 12s] -p, --password PASSWORD use this encrypted password for the new group [ 12s] -r, --system create a system account [ 12s] [ 12s] [108/119] installing automake-1.14.1-3.38 [ 12s] [109/119] installing build-20120927-3.1 [ 12s] [110/119] installing docbook_4-4.5-2.1 [ 12s] [111/119] installing git-core-2.0.1-1.11 [ 13s] [112/119] installing git-2.0.1-1.11 [ 13s] [113/119] installing libtool-2.4.2-4.38 [ 13s] [114/119] installing docbook-xsl-stylesheets-1.78.1-2.1 [ 14s] [115/119] installing asciidoc-8.6.6-2.1 [ 14s] [116/119] installing nss-3.23-3.35 [ 14s] [117/119] installing libsoftokn3-3.23-3.35 [ 14s] [118/119] installing rpm-4.11.0.1-4.23 [ 14s] [119/119] installing rpm-build-4.11.0.1-4.23 [ 14s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 14s] now finalizing build dir... [ 14s] ----------------------------------------------------------------- [ 14s] I have the following modifications for dracut.spec: [ 14s] 9c9 [ 14s] < Release: 0 [ 14s] --- [ 14s] > Release: 3.8 [ 14s] 256a257 [ 14s] > %changelog [ 14s] ----------------------------------------------------------------- [ 14s] ----- building dracut.spec (user abuild) [ 14s] ----------------------------------------------------------------- [ 14s] ----------------------------------------------------------------- [ 14s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/bdf4bc6c191a364c6a609eb310c8d80f-dracut' -ba /home/abuild/rpmbuild/SOURCES/dracut.spec [ 14s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ZLjRD1 [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + rm -rf dracut-032 [ 14s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 14s] + /bin/tar -xf - [ 14s] + STATUS=0 [ 14s] + '[' 0 -ne 0 ']' [ 14s] + cd dracut-032 [ 14s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 14s] + echo 'Patch #0 (0001-modify-ln-relative-with-cd-ln.patch):' [ 14s] Patch #0 (0001-modify-ln-relative-with-cd-ln.patch): [ 14s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-modify-ln-relative-with-cd-ln.patch [ 14s] + /bin/patch -p1 --fuzz=2 [ 14s] patching file Makefile [ 14s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 14s] + exit 0 [ 14s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.q9ToLR [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd dracut-032 [ 14s] ++ uname -m [ 14s] + [[ x86_64 == \a\a\r\c\h\6\4 ]] [ 14s] + LANG=C [ 14s] + export LANG [ 14s] + unset DISPLAY [ 14s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 14s] + export CFLAGS [ 14s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu++11' [ 14s] + export CXXFLAGS [ 14s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 14s] + export FFLAGS [ 14s] + LDFLAGS= [ 14s] + export LDFLAGS [ 14s] + LD_AS_NEEDED=1 [ 14s] + export LD_AS_NEEDED [ 14s] + make all [ 14s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 14s] install/dracut-install.c: In function 'resolve_deps': [ 14s] install/dracut-install.c:338:17: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 14s] read(fd, buf, LINE_MAX); [ 14s] ^~~~~~~~~~~~~~~~~~~~~~~ [ 14s] install/dracut-install.c: In function 'cp': [ 14s] install/dracut-install.c:223:33: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 14s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 14s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 15s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 15s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 15s] cc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 15s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 15s] ln -fs install/dracut-install dracut-install [ 15s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 15s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 16s] Note: Writing lsinitrd.1 [ 16s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 16s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 16s] Note: Writing dracut.conf.5 [ 16s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 17s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 18s] Note: Writing dracut.cmdline.7 [ 18s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 18s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 18s] Note: Writing dracut.bootup.7 [ 18s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 19s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 19s] Note: Writing dracut.8 [ 19s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 20s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 20s] Note: Writing dracut-catimages.8 [ 20s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 20s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 20s] Note: Writing mkinitrd.8 [ 20s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 21s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 21s] Note: Writing dracut-cmdline.service.8 [ 21s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 21s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 21s] Note: Writing dracut-initqueue.service.8 [ 21s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 21s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 22s] Note: Writing dracut-mount.service.8 [ 22s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 22s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 22s] Note: Writing dracut-shutdown.service.8 [ 22s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 22s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 23s] Note: Writing dracut-pre-mount.service.8 [ 23s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 23s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 23s] Note: Writing dracut-pre-pivot.service.8 [ 23s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 23s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 23s] Note: Writing dracut-pre-trigger.service.8 [ 23s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 24s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 24s] Note: Writing dracut-pre-udev.service.8 [ 24s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 27s] xsltproc -o dracut.html --xinclude -nonet \ [ 27s] --stringparam html.stylesheet \ [ 27s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 27s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 27s] rm -f -- dracut.xml [ 27s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 27s] + exit 0 [ 27s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.i1JKfe [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd dracut-032 [ 27s] + LANG=C [ 27s] + export LANG [ 27s] + unset DISPLAY [ 27s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 [ 27s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/bin [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/etc [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/modules.d [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man8 [ 27s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/bin/dracut [ 27s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/bin/dracut-catimages [ 27s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/bin/mkinitrd [ 27s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/bin/lsinitrd [ 27s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/etc/dracut.conf [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/etc/dracut.conf.d [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut.conf.d [ 27s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut-functions.sh [ 27s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut-version.sh [ 27s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut-functions [ 27s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut-logger.sh [ 27s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut-initramfs-restore [ 27s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut [ 27s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man1/${i##*/}; done [ 27s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man5/${i##*/}; done [ 27s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man7/${i##*/}; done [ 27s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man8/${i##*/}; done [ 27s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/man/man7/dracut.kernel.7 [ 27s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/systemd/system; \ [ 27s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 && ln -sf .//usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service .//usr/lib/systemd/system/dracut-shutdown.service && cd - ; \ [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/systemd/system/shutdown.target.wants; \ [ 27s] ln -s ../dracut-shutdown.service \ [ 27s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/systemd/system/initrd.target.wants; \ [ 27s] for i in \ [ 27s] dracut-cmdline.service \ [ 27s] dracut-initqueue.service \ [ 27s] dracut-mount.service \ [ 27s] dracut-pre-mount.service \ [ 27s] dracut-pre-pivot.service \ [ 27s] dracut-pre-trigger.service \ [ 27s] dracut-pre-udev.service \ [ 27s] ; do \ [ 27s] cd /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 && ln -sf .//usr/lib/dracut/modules.d/98systemd/$i .//usr/lib/systemd/system && cd -; \ [ 27s] ln -s ../$i \ [ 27s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 27s] done \ [ 27s] fi [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] if [ -f install/dracut-install ]; then \ [ 27s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut-install; \ [ 27s] fi [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/kernel/install.d [ 27s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/kernel/install.d/50-dracut.install [ 27s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/kernel/install.d/51-dracut-rescue.install [ 27s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/bash-completion/completions [ 27s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/bash-completion/completions/dracut [ 27s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/bash-completion/completions/lsinitrd [ 27s] + echo DRACUT_VERSION=032-3.8 [ 27s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64//usr/lib/dracut/modules.d/01fips [ 27s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64//usr/lib/dracut/modules.d/02fips-aesni [ 27s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64//usr/lib/dracut/modules.d/50gensplash [ 27s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64//usr/lib/dracut/modules.d/96securityfs [ 27s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64//usr/lib/dracut/modules.d/97masterkey [ 27s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64//usr/lib/dracut/modules.d/98integrity [ 27s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64//usr/lib/dracut/modules.d/98selinux [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/boot/dracut [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/var/lib/dracut/overlay [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/var/log [ 27s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/var/log/dracut.log [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/com/initramfs [ 27s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/etc/dracut.conf.d/01-dist.conf [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/etc/logrotate.d [ 27s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/etc/logrotate.d/dracut_log [ 27s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 27s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/lib/dracut/dracut-install [ 28s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.24/sysdeps/x86_64/crti.S: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.24/sysdeps/x86_64/crtn.S: Cannot stat: No such file or directory [ 28s] cpio: glibc-2.24/sysdeps/x86_64/start.S: Cannot stat: No such file or directory [ 28s] 195 blocks [ 28s] + /usr/lib/rpm/check-buildroot [ 28s] + /usr/lib/rpm//brp-compress [ 28s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 28s] + /usr/lib/rpm/brp-python-hardlink [ 28s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 [ 28s] Processing files: dracut-032-3.8.x86_64 [ 28s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 28s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 28s] [ 28s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.9dg6nD [ 28s] + umask 022 [ 28s] + cd /home/abuild/rpmbuild/BUILD [ 28s] + cd dracut-032 [ 28s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/licenses/dracut [ 28s] + export LICENSEDIR [ 28s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/licenses/dracut [ 28s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64/usr/share/licenses/dracut [ 28s] + exit 0 [ 29s] Provides: config(dracut) = 032-3.8 dracut = 032-3.8 dracut(x86-64) = 032-3.8 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: /bin/bash /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libc.so.6(GLIBC_2.8)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libgcc_s.so.1(GCC_3.3.1)(64bit) [ 29s] Conflicts: systemd < 187 [ 29s] Processing files: dracut-debugsource-032-3.8.x86_64 [ 29s] Provides: dracut-debugsource = 032-3.8 dracut-debugsource(x86-64) = 032-3.8 [ 29s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 29s] Processing files: dracut-network-032-3.8.x86_64 [ 29s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 29s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 29s] [ 29s] Provides: dracut-network = 032-3.8 dracut-network(x86-64) = 032-3.8 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: /bin/bash /bin/sh [ 29s] Processing files: dracut-caps-032-3.8.x86_64 [ 29s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 29s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 29s] [ 29s] Provides: dracut-caps = 032-3.8 dracut-caps(x86-64) = 032-3.8 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: /bin/bash [ 29s] Processing files: dracut-tools-032-3.8.x86_64 [ 29s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 29s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 29s] [ 29s] Provides: dracut-tools = 032-3.8 dracut-tools(x86-64) = 032-3.8 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: /bin/bash [ 29s] Processing files: dracut-debuginfo-032-3.8.x86_64 [ 29s] Provides: dracut-debuginfo = 032-3.8 dracut-debuginfo(x86-64) = 032-3.8 [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 [ 29s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-3.8.src.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-032-3.8.x86_64.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-debugsource-032-3.8.x86_64.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-network-032-3.8.x86_64.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-caps-032-3.8.x86_64.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-tools-032-3.8.x86_64.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/dracut-debuginfo-032-3.8.x86_64.rpm [ 29s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.W5El5a [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd dracut-032 [ 29s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-3.8.x86_64 [ 29s] + exit 0 [ 29s] ... checking for files with abuild user/group [ 29s] ... creating baselibs [ 29s] ... comparing built packages with the former built [ 30s] /usr/lib/build/pkg-diff.sh [ 30s] compare /.build.oldpackages/dracut-032-3.7.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-3.8.src.rpm [ 30s] This is not a prerelease project. Compare the project name. [ 30s] comparing rpmtags [ 30s] comparing RELEASE [ 30s] comparing PROVIDES [ 30s] comparing scripts [ 30s] comparing filelist [ 30s] comparing file checksum [ 30s] RPM meta information is identical [ 30s] compare /.build.oldpackages/dracut-032-3.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-032-3.8.x86_64.rpm [ 30s] Comparing dracut-032-3.7.x86_64.rpm to dracut-032-3.8.x86_64.rpm [ 30s] This is not a prerelease project. Compare the project name. [ 30s] comparing rpmtags [ 30s] comparing RELEASE [ 30s] comparing PROVIDES [ 30s] comparing scripts [ 30s] comparing filelist [ 30s] comparing file checksum [ 30s] creating rename script [ 30s] RPM file checksum differs. [ 30s] Extracting packages [ 30s] /usr/lib/dracut/dracut-version.sh differs (ASCII text) [ 30s] --- old//usr/lib/dracut/dracut-version.sh 2017-05-12 19:29:49.000000000 +0000 [ 30s] +++ new//usr/lib/dracut/dracut-version.sh 2017-05-19 22:49:22.000000000 +0000 [ 30s] @@ -1 +1 @@ [ 30s] -DRACUT_VERSION=032-3.7 [ 30s] +DRACUT_VERSION=032-3.8 [ 30s] compare /.build.oldpackages/dracut-caps-032-3.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-caps-032-3.8.x86_64.rpm [ 30s] Comparing dracut-caps-032-3.7.x86_64.rpm to dracut-caps-032-3.8.x86_64.rpm [ 30s] This is not a prerelease project. Compare the project name. [ 30s] comparing rpmtags [ 30s] comparing RELEASE [ 30s] comparing PROVIDES [ 30s] comparing scripts [ 30s] comparing filelist [ 30s] comparing file checksum [ 30s] creating rename script [ 30s] RPM meta information is identical [ 30s] compare /.build.oldpackages/dracut-debuginfo-032-3.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-debuginfo-032-3.8.x86_64.rpm [ 30s] skipping -debuginfo package [ 30s] compare /.build.oldpackages/dracut-debugsource-032-3.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-debugsource-032-3.8.x86_64.rpm [ 30s] Comparing dracut-debugsource-032-3.7.x86_64.rpm to dracut-debugsource-032-3.8.x86_64.rpm [ 30s] This is not a prerelease project. Compare the project name. [ 30s] comparing rpmtags [ 30s] comparing RELEASE [ 30s] comparing PROVIDES [ 30s] comparing scripts [ 30s] comparing filelist [ 30s] comparing file checksum [ 30s] creating rename script [ 30s] RPM meta information is identical [ 30s] compare /.build.oldpackages/dracut-network-032-3.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-network-032-3.8.x86_64.rpm [ 30s] Comparing dracut-network-032-3.7.x86_64.rpm to dracut-network-032-3.8.x86_64.rpm [ 30s] This is not a prerelease project. Compare the project name. [ 30s] comparing rpmtags [ 31s] comparing RELEASE [ 31s] comparing PROVIDES [ 31s] comparing scripts [ 31s] comparing filelist [ 31s] comparing file checksum [ 31s] creating rename script [ 31s] RPM meta information is identical [ 31s] compare /.build.oldpackages/dracut-tools-032-3.7.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/dracut-tools-032-3.8.x86_64.rpm [ 31s] Comparing dracut-tools-032-3.7.x86_64.rpm to dracut-tools-032-3.8.x86_64.rpm [ 31s] This is not a prerelease project. Compare the project name. [ 31s] comparing rpmtags [ 31s] comparing RELEASE [ 31s] comparing PROVIDES [ 31s] comparing scripts [ 31s] comparing filelist [ 31s] comparing file checksum [ 31s] creating rename script [ 31s] RPM file checksum differs. [ 31s] Extracting packages [ 31s] Package content is identical [ 31s] [ 31s] obspw06 finished "build dracut.spec" at Fri May 19 22:49:26 UTC 2017. [ 31s]