[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw09 started "build _service:gbs:capi-system-sensor.spec" at Mon May 22 18:27:22 UTC 2017. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 'd407a444e50adea4816487740c90b357' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 2s] [5/40] preinstalling bash... [ 2s] [6/40] preinstalling diffutils... [ 2s] [7/40] preinstalling grep... [ 2s] [8/40] preinstalling libattr... [ 2s] [9/40] preinstalling libbz2... [ 2s] [10/40] preinstalling libcap... [ 2s] [11/40] preinstalling libelf... [ 2s] [12/40] preinstalling libfreebl3... [ 2s] [13/40] preinstalling libgcc... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: girepository -> libgirepository [ 8s] breaking dependency libgirepository -> girepository [ 8s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 8s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 8s] cycle: vconf-compat -> buxton2 [ 8s] breaking dependency buxton2 -> vconf-compat [ 8s] cycle: efl -> eina [ 8s] breaking dependency efl -> eina [ 8s] cycle: eo -> efl [ 8s] breaking dependency eo -> efl [ 8s] cycle: eo -> eina -> efl [ 8s] breaking dependency eo -> eina [ 8s] cycle: libalarm -> alarm-server [ 8s] breaking dependency alarm-server -> libalarm [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/192] installing default-ac-domains-0.1-2.2 [ 9s] [2/192] installing libmagic-data-5.28-4.6 [ 9s] [3/192] installing setup-0.9-3.22 [ 9s] [4/192] installing terminfo-base-5.9-3.33 [ 9s] [5/192] installing filesystem-3.1-3.2 [ 9s] [6/192] installing glibc-2.24-3.19 [ 10s] [7/192] installing bash-3.2.57-4.1 [ 10s] [8/192] installing binutils-2.27-4.27 [ 10s] [9/192] installing capi-base-common-0.4.13-3.2 [ 10s] [10/192] installing cpio-2.11-3.3 [ 10s] [11/192] installing diffutils-3.3-3.1 [ 10s] [12/192] installing findutils-4.3.8-3.36 [ 10s] [13/192] installing gdbm-1.8.3-3.3 [ 10s] [14/192] installing hostname-3.12-4.1 [ 10s] [15/192] installing iniparser-3.1-1.4 [ 11s] [16/192] installing libatomic-6.2.1-6.2 [ 11s] [17/192] installing libattr-2.4.47-3.34 [ 11s] [18/192] installing libbz2-1.0.6-4.34 [ 11s] [19/192] installing libcap-2.24-3.31 [ 11s] [20/192] installing libelf-0.153-3.16 [ 11s] [21/192] installing libelf0-0.8.13-3.1 [ 11s] [22/192] installing libexpat-2.2.0-3.38 [ 11s] [23/192] installing libext2fs-1.42.13-3.3 [ 11s] [24/192] installing libffi-3.1-3.1 [ 11s] [25/192] installing libfreebl3-3.23-3.29 [ 11s] [26/192] installing libgcc-6.2.1-6.2 [ 12s] [27/192] installing libgomp-6.2.1-6.2 [ 12s] [28/192] installing libitm-6.2.1-6.2 [ 12s] [29/192] installing libltdl-2.4.2-4.33 [ 12s] [30/192] installing liblua-5.1.4-3.7 [ 12s] [31/192] installing liblzma-5.2.2-3.33 [ 12s] [32/192] installing libpcre-8.39-3.4 [ 12s] [33/192] installing libpopt-1.16-4.8 [ 12s] [34/192] installing libpython-2.7.8-3.25 [ 12s] [35/192] installing libsmack-1.3.0-3.32 [ 12s] [36/192] installing libsmartcols-2.28-3.1 [ 12s] [37/192] installing libsqlite-3.18.0-5.2 [ 13s] [38/192] installing libuuid-2.28-3.1 [ 13s] [39/192] installing m4-1.4.17-3.1 [ 13s] [40/192] installing net-tools-2.0_20121208git-3.1 [ 13s] [41/192] installing nspr-4.12-3.8 [ 13s] [42/192] installing patch-2.7-3.8 [ 13s] [43/192] installing pkg-config-0.28-4.35 [ 13s] [44/192] installing sed-4.1c-3.1 [ 13s] [45/192] installing update-alternatives-1.18.15-3.1 [ 13s] [46/192] installing which-2.20-6.1 [ 13s] [47/192] installing xdgmime-0.0.12-2.2 [ 13s] [48/192] installing zlib-1.2.8-3.38 [ 13s] [49/192] installing libncurses-5.9-3.33 [ 14s] [50/192] installing shadow-utils-4.1.4.2-3.2 [ 14s] [51/192] installing build-compare-2015.04.28-3.25 [ 14s] [52/192] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 15s] [53/192] installing sensord-dummy-4.0.0-9.1 [ 15s] [54/192] installing capi-base-common-devel-0.4.13-3.2 [ 15s] [55/192] installing coreutils-6.9-3.1 [ 15s] [56/192] installing cpp-6.2.1-6.2 [ 16s] [57/192] installing gawk-3.1.5-3.1 [ 16s] [58/192] installing gcc-c++-6.2.1-6.2 [ 16s] [59/192] installing grep-2.5.2-3.1 [ 16s] [60/192] installing less-466-8.1 [ 16s] [61/192] installing libacl-2.2.52-3.41 [ 16s] [62/192] installing libasm-0.153-3.16 [ 16s] [63/192] installing libblkid-2.28-3.1 [ 17s] [64/192] installing libcap-tools-2.24-3.31 [ 17s] [65/192] installing libgfortran-6.2.1-6.2 [ 17s] [66/192] installing libglib-2.44.1-1.3 [ 17s] [67/192] installing libopenssl-1.0.2j-3.32 [ 17s] [68/192] installing libpcreposix-8.39-3.4 [ 17s] [69/192] installing libreadline-5.2-3.32 [ 17s] [70/192] installing libstdc++-6.2.1-6.2 [ 17s] [71/192] installing make-4.0-3.7 [ 17s] [72/192] installing minizip-1.2.8-3.38 [ 18s] [73/192] installing nss-certs-3.23-3.29 [ 18s] [74/192] installing pkgmgr-0.6.0-2.2 [ 18s] /var/tmp/rpm-tmp.OKMPBm: line 9: /etc/tizen-platform.conf: No such file or directory [ 18s] warning: %post(pkgmgr-0.6.0-2.2.aarch64) scriptlet failed, exit status 1 [ 18s] [75/192] installing procps-ng-3.3.9-3.2 [ 18s] [76/192] installing smack-1.3.0-3.32 [ 18s] [77/192] installing bzip2-1.0.6-4.34 [ 18s] [78/192] installing libmagic-5.28-4.6 [ 18s] [79/192] installing libxml2-2.9.4-4.33 [ 18s] [80/192] installing xz-5.2.2-3.33 [ 18s] [81/192] installing libkmod-24-2.1 [ 19s] [82/192] installing ttrace-1.0.3-1.4 [ 19s] [83/192] installing libdw-0.153-3.16 [ 19s] [84/192] installing libstdc++-devel-6.2.1-6.2 [ 19s] [85/192] installing file-5.28-4.6 [ 19s] [86/192] installing libgmodule-2.44.1-1.3 [ 19s] [87/192] installing libgthread-2.44.1-1.3 [ 19s] [88/192] installing libmount-2.28-3.1 [ 19s] [89/192] installing linux-glibc-devel-3.10-3.37 [ 20s] [90/192] installing tar-1.17-3.1 [ 20s] [91/192] installing vconf-internal-keys-devel-0.0.159-4.2 [ 20s] [92/192] installing db4-4.8.30.NC-3.38 [ 20s] [93/192] installing glibc-locale-2.24-3.19 [ 20s] [94/192] installing gzip-1.3.12-3.31 [ 20s] [95/192] installing libcc1-6.2.1-6.2 [ 21s] [96/192] installing libfdisk1-2.28-3.1 [ 21s] [97/192] installing libgobject-2.44.1-1.3 [ 21s] [98/192] installing libubsan-6.2.1-6.2 [ 21s] [99/192] installing pam-1.1.6-3.2 [ 21s] [100/192] installing security-config-1.0-2.1 [ 29s] usermod: user 'buxton' does not exist [ 29s] usermod: user 'dbus' does not exist [ 29s] [101/192] installing sqlite-3.18.0-5.2 [ 29s] [102/192] installing tizen-platform-config-4.0-1.3 [ 30s] [103/192] installing libpcrecpp-8.39-3.4 [ 30s] [104/192] installing tzdata-2016i-4.1 [ 30s] [105/192] installing cynara-db-migration-0.14.10-2.6 [ 30s] [106/192] installing elfutils-0.153-3.16 [ 30s] [107/192] installing shared-mime-info-1.3-2.2 [ 36s] [108/192] installing libarchive-3.1.2-3.1 [ 36s] [109/192] installing glibc-devel-2.24-3.19 [ 36s] [110/192] installing libtzplatform-config-4.0-1.3 [ 36s] [111/192] installing perl-5.20.0-4.13 [ 37s] [112/192] installing libsystemd-231-4.3 [ 38s] [113/192] installing pcre-devel-8.39-3.4 [ 38s] [114/192] installing cmake-2.8.12.2-4.1 [ 38s] [115/192] installing libcynara-commons-0.14.10-2.6 [ 39s] [116/192] installing python-2.7.8-3.25 [ 40s] [117/192] installing gcc-6.2.1-6.2 [ 41s] [118/192] installing util-linux-2.28-3.1 [ 42s] [119/192] installing systemd-231-4.3 [ 42s] [120/192] installing build-mkbaselibs-20120927-3.1 [ 42s] [121/192] installing libtzplatform-config-devel-4.0-1.3 [ 42s] [122/192] installing qemu-accel-x86_64-aarch64-0.4-3.14 [ 47s] warning: %post(qemu-accel-x86_64-aarch64-0.4-3.14.aarch64) scriptlet failed, exit status 1 [ 47s] [123/192] installing autoconf-2.69-3.40 [ 47s] [124/192] installing python-xml-2.7.8-3.25 [ 47s] [125/192] installing systemd-devel-231-4.3 [ 47s] [126/192] installing util-linux-su-2.28-3.1 [ 47s] [127/192] installing libcynara-agent-0.14.10-2.6 [ 47s] [128/192] installing libcynara-client-0.14.10-2.6 [ 47s] [129/192] installing libcynara-creds-commons-0.14.10-2.6 [ 47s] [130/192] installing libcynara-monitor-0.14.10-2.6 [ 47s] [131/192] installing libcynara-session-0.14.10-2.6 [ 47s] [132/192] installing sqlite-devel-3.18.0-5.2 [ 47s] [133/192] installing libcynara-admin-0.14.10-2.6 [ 48s] [134/192] installing libdlog-0.6-2.2 [ 48s] [135/192] installing libtracker-1.0.1-2.2 [ 48s] [136/192] installing libdlog-devel-0.6-2.2 [ 48s] [137/192] installing libwayland-client-1.12.0-4.3 [ 48s] [138/192] installing automake-1.14.1-3.30 [ 48s] [139/192] installing libslp-db-util-0.1.1-2.2 [ 48s] [140/192] installing build-20120927-3.1 [ 48s] [141/192] installing libcynara-creds-self-0.14.10-2.6 [ 48s] [142/192] installing libcynara-creds-socket-0.14.10-2.6 [ 48s] [143/192] installing capi-system-info-0.2.0-1.3 [ 48s] Running capi-system-info %posttrans script [ 48s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 48s] iniparser: cannot open /etc/info.ini [ 48s] [144/192] installing libwayland-extension-client-1.1.19-6.2 [ 48s] [145/192] installing libtool-2.4.2-4.33 [ 48s] [146/192] installing cynara-devel-0.14.10-2.6 [ 49s] [147/192] installing eo-1.16.0-7.1 [ 49s] [148/192] installing nss-3.23-3.29 [ 49s] [149/192] installing libgio-2.44.1-1.3 [ 49s] [150/192] installing gio-branding-upstream-2.44.1-1.3 [ 49s] [151/192] installing efl-1.16.0-7.1 [ 49s] [152/192] installing libjson-glib-1.2.0-2.2 [ 49s] [153/192] installing libsoftokn3-3.23-3.29 [ 49s] [154/192] installing glib2-tools-2.44.1-1.3 [ 49s] [155/192] installing libcynara-creds-gdbus-0.14.10-2.6 [ 49s] [156/192] installing libgirepository-1.44.1-2.2 [ 49s] [157/192] installing rpm-4.11.0.1-4.17 [ 50s] [158/192] installing buxton2-1.2.7-1.2 [ 51s] warning: user buxton does not exist - using root [ 51s] warning: group buxton does not exist - using root [ 51s] warning: user buxton does not exist - using root [ 51s] warning: group buxton does not exist - using root [ 51s] Running buxton2 %posttrans script [ 51s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 51s] /etc/buxton2/*: No such file or directory [ 51s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 51s] /var/lib/buxton2/*: No such file or directory [ 51s] [159/192] installing girepository-1.44.1-2.2 [ 51s] [160/192] installing bundle-0.2.0-2.2 [ 51s] [161/192] installing eina-1.16.0-7.1 [ 51s] [162/192] installing vconf-compat-1.2.7-1.2 [ 51s] [163/192] installing context-common-1.0.3-5.2 [ 51s] [164/192] installing glib2-devel-2.44.1-1.3 [ 51s] [165/192] installing rpm-build-4.11.0.1-4.17 [ 51s] [166/192] installing typelib-Json-1.2.0-2.2 [ 51s] [167/192] installing bundle-devel-0.2.0-2.2 [ 51s] [168/192] installing eventsystem-0.1.1-1.2 [ 51s] [169/192] installing libcynara-creds-gdbus-devel-0.14.10-2.6 [ 51s] [170/192] installing vconf-compat-devel-1.2.7-1.2 [ 51s] [171/192] installing ecore-core-1.16.0-7.1 [ 51s] [172/192] installing libstorage-0.1.1-3.2 [ 51s] [173/192] installing capi-system-device-0.1.0-4.2 [ 51s] [174/192] installing pkgmgr-info-0.6.2-6.2 [ 52s] [175/192] installing json-glib-devel-1.2.0-2.2 [ 52s] [176/192] installing sensord-devel-4.0.0-9.1 [ 52s] [177/192] installing pkgmgr-info-parser-0.6.2-6.2 [ 52s] [178/192] installing pkgmgr-installer-0.6.0-2.2 [ 52s] [179/192] installing pkgmgr-client-0.6.0-2.2 [ 52s] [180/192] installing capi-appfw-package-manager-0.4.0-7.2 [ 52s] [181/192] installing aul-0.6.7-7.1 [ 52s] [182/192] installing app-svc-0.1.53-2.2 [ 52s] [183/192] installing capi-appfw-app-control-0.5.5-3.2 [ 52s] [184/192] installing capi-appfw-app-control-devel-0.5.5-3.2 [ 52s] [185/192] installing notification-0.3.20-5.2 [ 52s] [186/192] installing notification-devel-0.3.20-5.2 [ 53s] [187/192] installing alarm-server-0.5.8-4.3 [ 53s] Running alarm-server %posttrans script [ 53s] [188/192] installing libalarm-0.5.8-4.3 [ 53s] [189/192] installing libalarm-devel-0.5.8-4.3 [ 53s] [190/192] installing context-sensor-recorder-dummy-1.0.0-3.1 [ 53s] [191/192] installing context-common-devel-1.0.3-5.2 [ 53s] [192/192] installing context-sensor-recorder-devel-1.0.0-3.1 [ 53s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 53s] now finalizing build dir... [ 54s] build target is aarch64-tizen-linux [ 54s] ----------------------------------------------------------------- [ 54s] I have the following modifications for capi-system-sensor.spec: [ 54s] 5c5 [ 54s] < Release: 1 [ 54s] --- [ 54s] > Release: 3.1 [ 54s] ----------------------------------------------------------------- [ 54s] ----- building capi-system-sensor.spec (user abuild) [ 54s] ----------------------------------------------------------------- [ 54s] ----------------------------------------------------------------- [ 54s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/d407a444e50adea4816487740c90b357-capi-system-sensor' -ba /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 54s] Building target platforms: aarch64-tizen-linux [ 54s] Building for target aarch64-tizen-linux [ 54s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.g4CsAT [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + rm -rf capi-system-sensor-0.2.5 [ 54s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.2.5.tar.gz [ 54s] + /bin/tar -xf - [ 54s] + STATUS=0 [ 54s] + '[' 0 -ne 0 ']' [ 54s] + cd capi-system-sensor-0.2.5 [ 54s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 54s] + exit 0 [ 54s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.yZEKrK [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd capi-system-sensor-0.2.5 [ 54s] ++ uname -m [ 54s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 54s] + ref=/usr/lib/rpm [ 54s] + for s in guess sub [ 54s] ++ find -maxdepth 8 -name config.guess [ 54s] + for s in guess sub [ 54s] ++ find -maxdepth 8 -name config.sub [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 54s] + export CFLAGS [ 54s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 54s] + export CXXFLAGS [ 54s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 54s] + export FFLAGS [ 54s] + LDFLAGS= [ 54s] + export LDFLAGS [ 54s] + LD_AS_NEEDED=1 [ 54s] + export LD_AS_NEEDED [ 54s] ++ echo 0.2.5 [ 54s] ++ awk 'BEGIN {FS="."}{print $1}' [ 54s] + MAJORVER=0 [ 54s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 54s] + export CFLAGS [ 54s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 54s] + export CXXFLAGS [ 54s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 54s] + export FFLAGS [ 54s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.2.5 -DMAJORVER=0 [ 55s] -- The C compiler identification is GNU 6.2.1 [ 55s] -- The CXX compiler identification is GNU 6.2.1 [ 55s] -- Check for working C compiler: /usr/bin/cc [ 55s] -- Check for working C compiler: /usr/bin/cc -- works [ 55s] -- Detecting C compiler ABI info [ 55s] -- Detecting C compiler ABI info - done [ 55s] -- Check for working CXX compiler: /usr/bin/c++ [ 55s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 55s] -- Detecting CXX compiler ABI info [ 55s] -- Detecting CXX compiler ABI info - done [ 55s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 55s] -- checking for module 'dlog sensor capi-base-common context-sensor-recorder-client' [ 55s] -- found dlog sensor capi-base-common context-sensor-recorder-client, version 1.0;4.0.0;0.4.13;1.0.0 [ 56s] -- Configuring done [ 56s] -- Generating done [ 56s] CMake Warning: [ 56s] Manually-specified variables were not used by the project: [ 56s] [ 56s] INCLUDE_INSTALL_DIR [ 56s] LIB_SUFFIX [ 56s] SHARE_INSTALL_PREFIX [ 56s] SYSCONF_INSTALL_DIR [ 56s] [ 56s] [ 56s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 56s] + /bin/make -j4 [ 56s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 56s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 56s] /bin/make -f CMakeFiles/Makefile2 all [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 56s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 56s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 56s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 56s] Scanning dependencies of target capi-system-sensor [ 56s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 56s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 56s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 56s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 1 [ 56s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 2 [ 56s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 3 [ 56s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 4 [ 56s] [ 20%] [ 40%] [ 60%] [ 80%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o [ 56s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_recorder.cpp [ 56s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 56s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o [ 56s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor.cpp [ 56s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_provider.cpp [ 56s] Building C object CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o [ 56s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/geomagnetic_field.c [ 57s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 5 [ 57s] [100%] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 57s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/fusion_util.c [ 58s] Linking CXX shared library libcapi-system-sensor.so [ 58s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-sensor.dir/link.txt --verbose=1 [ 58s] /usr/bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -shared -Wl,-soname,libcapi-system-sensor.so.0 -o libcapi-system-sensor.so.0.2.5 CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o -L/usr//usr/lib64 -lsensor -lvconf -lcontext-sensor-recorder-client -lcontext-client -lcontext-shared -ljson-glib-1.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcapi-base-common -ldlog -lsqlite3 [ 58s] /usr/bin/cmake -E cmake_symlink_library libcapi-system-sensor.so.0.2.5 libcapi-system-sensor.so.0 libcapi-system-sensor.so [ 58s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 1 2 3 4 5 [ 58s] [100%] Built target capi-system-sensor [ 58s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 58s] + exit 0 [ 58s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.HxJkiM [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd capi-system-sensor-0.2.5 [ 58s] + LANG=C [ 58s] + export LANG [ 58s] + unset DISPLAY [ 58s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 58s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 install [ 58s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 58s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 58s] /bin/make -f CMakeFiles/Makefile2 all [ 58s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 58s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 58s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 58s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] make[2]: Nothing to be done for 'CMakeFiles/capi-system-sensor.dir/build'. [ 58s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 1 2 3 4 5 [ 58s] [100%] Built target capi-system-sensor [ 58s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 58s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 58s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] make[1]: Nothing to be done for 'preinstall'. [ 58s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 58s] Install the project... [ 58s] /usr/bin/cmake -P cmake_install.cmake [ 58s] -- Install configuration: "" [ 58s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/pkgconfig/capi-system-sensor.pc [ 58s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/include/sensor/sensor.h [ 58s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so.0.2.5 [ 58s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so.0 [ 58s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so [ 58s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/info/dir [ 58s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 -regex '.*\.la$' [ 58s] + xargs rm -f -- [ 58s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 -regex '.*\.a$' [ 58s] + xargs rm -f -- [ 58s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 58s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so.0.2.5 [ 58s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 58s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 58s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 58s] 271 blocks [ 58s] + /usr/lib/rpm/check-buildroot [ 58s] + /usr/lib/rpm//brp-compress [ 58s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 59s] + /usr/lib/rpm/brp-python-hardlink [ 59s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 59s] Processing files: capi-system-sensor-0.2.5-3.1.aarch64 [ 59s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 59s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 59s] [ 59s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ipsDuQ [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd capi-system-sensor-0.2.5 [ 59s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/licenses/capi-system-sensor [ 59s] + export LICENSEDIR [ 59s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/licenses/capi-system-sensor [ 59s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/licenses/capi-system-sensor [ 59s] + exit 0 [ 59s] Provides: capi-system-sensor = 0.2.5-3.1 capi-system-sensor(aarch-64) = 0.2.5-3.1 capi-system-sensor-profile_common = 0.2.5-3.1 capi-system-sensor-profile_ivi = 0.2.5-3.1 capi-system-sensor-profile_mobile = 0.2.5-3.1 capi-system-sensor-profile_tv = 0.2.5-3.1 capi-system-sensor-profile_wearable = 0.2.5-3.1 libcapi-system-sensor.so.0()(64bit) [ 59s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 59s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 59s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcontext-sensor-recorder-client.so.1()(64bit) libdlog.so.0()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libsensor.so.4()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) [ 59s] Processing files: capi-system-sensor-debugsource-0.2.5-3.1.aarch64 [ 59s] Provides: capi-system-sensor-debugsource = 0.2.5-3.1 capi-system-sensor-debugsource(aarch-64) = 0.2.5-3.1 [ 59s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 59s] Processing files: capi-system-sensor-devel-0.2.5-3.1.aarch64 [ 59s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 59s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 59s] [ 59s] Provides: capi-system-sensor-devel = 0.2.5-3.1 capi-system-sensor-devel(aarch-64) = 0.2.5-3.1 pkgconfig(capi-system-sensor) = 0.2.5 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0()(64bit) pkgconfig(capi-base-common) pkgconfig(context-sensor-recorder-client) pkgconfig(dlog) pkgconfig(sensor) [ 59s] Processing files: capi-system-sensor-debuginfo-0.2.5-3.1.aarch64 [ 59s] Provides: capi-system-sensor-debuginfo = 0.2.5-3.1 capi-system-sensor-debuginfo(aarch-64) = 0.2.5-3.1 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 59s] warning: Could not canonicalize hostname: obsnw09 [ 59s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-3.1.src.rpm [ 59s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-0.2.5-3.1.aarch64.rpm [ 59s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debugsource-0.2.5-3.1.aarch64.rpm [ 59s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-devel-0.2.5-3.1.aarch64.rpm [ 59s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debuginfo-0.2.5-3.1.aarch64.rpm [ 59s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.chjDXp [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd capi-system-sensor-0.2.5 [ 59s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 59s] + exit 0 [ 59s] ... checking for files with abuild user/group [ 59s] ... creating baselibs [ 60s] ... comparing built packages with the former built [ 60s] /usr/lib/build/pkg-diff.sh [ 60s] compare /.build.oldpackages/capi-system-sensor-0.2.5-2.3.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-3.1.src.rpm [ 60s] This is not a prerelease project. Compare the project name. [ 60s] comparing rpmtags [ 60s] comparing RELEASE [ 60s] comparing PROVIDES [ 61s] comparing scripts [ 61s] comparing filelist [ 61s] comparing file checksum [ 61s] RPM meta information is identical [ 61s] compare /.build.oldpackages/capi-system-sensor-0.2.5-2.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-0.2.5-3.1.aarch64.rpm [ 61s] Comparing capi-system-sensor-0.2.5-2.3.aarch64.rpm to capi-system-sensor-0.2.5-3.1.aarch64.rpm [ 61s] This is not a prerelease project. Compare the project name. [ 61s] comparing rpmtags [ 61s] --- /tmp/tmp.CMGsN22766/tmp.mcpLk22784 2017-05-22 18:28:23.654390885 +0000 [ 61s] +++ /tmp/tmp.CMGsN22766/tmp.iuMKG22786 2017-05-22 18:28:23.678391189 +0000 [ 61s] @@ -8,4 +8,4 @@ [ 61s] cpio xz 5T [ 61s] [ 61s] (none) (none) (none) [ 61s] -obs://build.tizen.org/Tizen:Unified/standard/b16cecd8efcd4df04a306b74bb98818e-capi-system-sensor Tizen:Unified [ 61s] +obs://build.tizen.org/Tizen:Unified/standard/d407a444e50adea4816487740c90b357-capi-system-sensor Tizen:Unified [ 61s] RPM meta information is different [ 61s] compare /.build.oldpackages/capi-system-sensor-debuginfo-0.2.5-2.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debuginfo-0.2.5-3.1.aarch64.rpm [ 61s] skipping -debuginfo package [ 61s] compare /.build.oldpackages/capi-system-sensor-debugsource-0.2.5-2.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debugsource-0.2.5-3.1.aarch64.rpm [ 61s] Comparing capi-system-sensor-debugsource-0.2.5-2.3.aarch64.rpm to capi-system-sensor-debugsource-0.2.5-3.1.aarch64.rpm [ 62s] This is not a prerelease project. Compare the project name. [ 62s] comparing rpmtags [ 62s] --- /tmp/tmp.qTDyc22806/tmp.HNStX22824 2017-05-22 18:28:24.090396403 +0000 [ 62s] +++ /tmp/tmp.qTDyc22806/tmp.tBFYb22826 2017-05-22 18:28:24.102396555 +0000 [ 62s] @@ -10,4 +10,4 @@ [ 62s] cpio xz 5T [ 62s] [ 62s] (none) (none) (none) [ 62s] -obs://build.tizen.org/Tizen:Unified/standard/b16cecd8efcd4df04a306b74bb98818e-capi-system-sensor Tizen:Unified [ 62s] +obs://build.tizen.org/Tizen:Unified/standard/d407a444e50adea4816487740c90b357-capi-system-sensor Tizen:Unified [ 62s] RPM meta information is different [ 62s] compare /.build.oldpackages/capi-system-sensor-devel-0.2.5-2.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-devel-0.2.5-3.1.aarch64.rpm [ 62s] Comparing capi-system-sensor-devel-0.2.5-2.3.aarch64.rpm to capi-system-sensor-devel-0.2.5-3.1.aarch64.rpm [ 62s] This is not a prerelease project. Compare the project name. [ 62s] comparing rpmtags [ 62s] --- /tmp/tmp.MwtNH22844/tmp.jbRum22862 2017-05-22 18:28:24.502401617 +0000 [ 62s] +++ /tmp/tmp.MwtNH22844/tmp.ZwHju22864 2017-05-22 18:28:24.526401921 +0000 [ 62s] @@ -10,4 +10,4 @@ [ 62s] cpio xz 5T [ 62s] [ 62s] (none) (none) (none) [ 62s] -obs://build.tizen.org/Tizen:Unified/standard/b16cecd8efcd4df04a306b74bb98818e-capi-system-sensor Tizen:Unified [ 62s] +obs://build.tizen.org/Tizen:Unified/standard/d407a444e50adea4816487740c90b357-capi-system-sensor Tizen:Unified [ 62s] RPM meta information is different [ 62s] [ 62s] obsnw09 finished "build capi-system-sensor.spec" at Mon May 22 18:28:24 UTC 2017. [ 62s] Retried build at Mon May 22 18:33:38 2017 returned same result, skipped Retried build at Tue May 23 05:21:04 2017 returned same result, skipped Retried build at Wed May 24 03:30:13 2017 returned same result, skipped Retried build at Mon May 29 16:37:16 2017 returned same result, skipped