[ 0s] Memory limit set to 87947400KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obspw03 started "build _service:gbs:capi-system-sensor.spec" at Fri Jun 16 00:08:16 UTC 2017. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '3d5600daeda57bfa5f14cbb956e920fc' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-aarch64 postinstall script [ 7s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: girepository -> libgirepository [ 8s] breaking dependency libgirepository -> girepository [ 8s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 8s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 8s] cycle: vconf-compat -> buxton2 [ 8s] breaking dependency buxton2 -> vconf-compat [ 8s] cycle: efl -> eina [ 8s] breaking dependency efl -> eina [ 8s] cycle: eo -> efl [ 8s] breaking dependency eo -> efl [ 8s] cycle: eo -> eina -> efl [ 8s] breaking dependency eo -> eina [ 8s] cycle: libalarm -> alarm-server [ 8s] breaking dependency alarm-server -> libalarm [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/183] installing default-ac-domains-0.1-2.2 [ 8s] [2/183] installing libmagic-data-5.28-4.12 [ 8s] [3/183] installing setup-0.9-3.24 [ 8s] [4/183] installing terminfo-base-5.9-3.39 [ 8s] [5/183] installing filesystem-3.1-3.2 [ 8s] [6/183] installing glibc-2.24-3.23 [ 8s] [7/183] installing bash-3.2.57-4.1 [ 8s] [8/183] installing binutils-2.27-5.3 [ 9s] [9/183] installing capi-base-common-0.4.13-3.2 [ 9s] [10/183] installing cpio-2.11-3.3 [ 9s] [11/183] installing diffutils-3.3-3.1 [ 9s] [12/183] installing findutils-4.3.8-3.42 [ 9s] [13/183] installing gdbm-1.8.3-3.3 [ 9s] [14/183] installing hostname-3.12-4.1 [ 9s] [15/183] installing iniparser-3.2-2.2 [ 9s] [16/183] installing libatomic-6.2.1-8.1 [ 9s] [17/183] installing libattr-2.4.47-3.40 [ 9s] [18/183] installing libbz2-1.0.6-4.40 [ 9s] [19/183] installing libcap-2.24-3.37 [ 9s] [20/183] installing libelf-0.153-3.19 [ 9s] [21/183] installing libelf0-0.8.13-3.1 [ 9s] [22/183] installing libexpat-2.2.0-3.44 [ 9s] [23/183] installing libext2fs-1.42.13-3.3 [ 9s] [24/183] installing libffi-3.1-3.1 [ 9s] [25/183] installing libfreebl3-3.23-3.35 [ 9s] [26/183] installing libgcc-6.2.1-8.1 [ 9s] [27/183] installing libgomp-6.2.1-8.1 [ 9s] [28/183] installing libitm-6.2.1-8.1 [ 10s] [29/183] installing libltdl-2.4.2-4.39 [ 10s] [30/183] installing liblua-5.1.4-3.9 [ 10s] [31/183] installing liblzma-5.2.2-3.39 [ 10s] [32/183] installing libpcre-8.39-3.5 [ 10s] [33/183] installing libpopt-1.16-4.10 [ 10s] [34/183] installing libpython-2.7.8-3.27 [ 10s] [35/183] installing libsmack-1.3.0-3.38 [ 10s] [36/183] installing libsmartcols-2.28-3.2 [ 10s] [37/183] installing libsqlite-3.18.0-5.4 [ 10s] [38/183] installing libuuid-2.28-3.2 [ 10s] [39/183] installing m4-1.4.17-3.1 [ 10s] [40/183] installing net-tools-2.0_20121208git-3.2 [ 10s] [41/183] installing nspr-4.12-3.10 [ 10s] [42/183] installing patch-2.7-3.10 [ 10s] [43/183] installing pkg-config-0.28-4.41 [ 10s] [44/183] installing sed-4.1c-3.1 [ 10s] [45/183] installing update-alternatives-1.18.15-3.1 [ 10s] [46/183] installing which-2.20-6.1 [ 10s] [47/183] installing xdgmime-0.0.12-2.2 [ 10s] [48/183] installing zlib-1.2.8-3.44 [ 10s] [49/183] installing libncurses-5.9-3.39 [ 11s] [50/183] installing shadow-utils-4.1.4.2-3.2 [ 11s] [51/183] installing build-compare-2015.04.28-3.28 [ 11s] [52/183] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 12s] [53/183] installing sensord-dummy-4.0.0-13.1 [ 12s] [54/183] installing capi-base-common-devel-0.4.13-3.2 [ 12s] [55/183] installing coreutils-6.9-3.1 [ 12s] [56/183] installing cpp-6.2.1-8.1 [ 12s] [57/183] installing gawk-3.1.5-3.1 [ 12s] [58/183] installing gcc-c++-6.2.1-8.1 [ 13s] [59/183] installing grep-2.5.2-3.1 [ 13s] [60/183] installing less-466-8.1 [ 13s] [61/183] installing libacl-2.2.52-3.47 [ 13s] [62/183] installing libasm-0.153-3.19 [ 13s] [63/183] installing libblkid-2.28-3.2 [ 13s] [64/183] installing libcap-tools-2.24-3.37 [ 13s] [65/183] installing libgfortran-6.2.1-8.1 [ 13s] [66/183] installing libglib-2.44.1-3.2 [ 13s] [67/183] installing libopenssl-1.0.2j-3.38 [ 14s] [68/183] installing libpcreposix-8.39-3.5 [ 14s] [69/183] installing libreadline-5.2-3.38 [ 14s] [70/183] installing libstdc++-6.2.1-8.1 [ 14s] [71/183] installing make-4.0-3.9 [ 14s] [72/183] installing minizip-1.2.8-3.44 [ 14s] [73/183] installing nss-certs-3.23-3.35 [ 14s] [74/183] installing pkgmgr-0.6.2-4.3 [ 14s] /var/tmp/rpm-tmp.nEY6rI: line 9: /etc/tizen-platform.conf: No such file or directory [ 14s] warning: %post(pkgmgr-0.6.2-4.3.aarch64) scriptlet failed, exit status 1 [ 14s] Running pkgmgr %posttrans script [ 14s] /var/tmp/rpm-tmp.ypAkuK: line 4: pkg_initdb: command not found [ 14s] /var/tmp/rpm-tmp.ypAkuK: line 5: install_preload_pkg: command not found [ 14s] /var/tmp/rpm-tmp.ypAkuK: line 12: pkgcmd: command not found [ 14s] /var/tmp/rpm-tmp.ypAkuK: line 14: /package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 14s] [75/183] installing procps-ng-3.3.9-3.3 [ 14s] [76/183] installing smack-1.3.0-3.38 [ 14s] [77/183] installing bzip2-1.0.6-4.40 [ 14s] [78/183] installing libmagic-5.28-4.12 [ 14s] [79/183] installing libxml2-2.9.4-4.39 [ 14s] [80/183] installing ttrace-1.0.3-4.1 [ 14s] [81/183] installing xz-5.2.2-3.39 [ 14s] [82/183] installing libkmod-24-2.1 [ 14s] [83/183] installing libdw-0.153-3.19 [ 15s] [84/183] installing libstdc++-devel-6.2.1-8.1 [ 15s] [85/183] installing file-5.28-4.12 [ 15s] [86/183] installing libgmodule-2.44.1-3.2 [ 15s] [87/183] installing libgthread-2.44.1-3.2 [ 15s] [88/183] installing libmount-2.28-3.2 [ 15s] [89/183] installing linux-glibc-devel-3.10-3.43 [ 15s] [90/183] installing tar-1.17-3.1 [ 15s] [91/183] installing vconf-internal-keys-devel-0.0.159-8.1 [ 15s] [92/183] installing db4-4.8.30.NC-3.44 [ 15s] [93/183] installing glibc-locale-2.24-3.23 [ 16s] [94/183] installing gzip-1.3.12-3.37 [ 16s] [95/183] installing libcc1-6.2.1-8.1 [ 16s] [96/183] installing libfdisk1-2.28-3.2 [ 16s] [97/183] installing libgobject-2.44.1-3.2 [ 16s] [98/183] installing libubsan-6.2.1-8.1 [ 16s] [99/183] installing pam-1.1.6-3.3 [ 16s] [100/183] installing security-config-1.0-2.1 [ 21s] usermod: user 'buxton' does not exist [ 21s] usermod: user 'dbus' does not exist [ 21s] [101/183] installing sqlite-3.18.0-5.4 [ 22s] [102/183] installing tizen-platform-config-4.0-2.3 [ 22s] [103/183] installing context-sensor-recorder-dummy-1.0.1-4.1 [ 22s] [104/183] installing libpcrecpp-8.39-3.5 [ 22s] [105/183] installing tzdata-2017b-5.1 [ 22s] [106/183] installing cynara-db-migration-0.14.10-2.7 [ 22s] [107/183] installing elfutils-0.153-3.19 [ 22s] [108/183] installing shared-mime-info-1.3-2.4 [ 28s] [109/183] installing libarchive-3.1.2-3.2 [ 28s] [110/183] installing glibc-devel-2.24-3.23 [ 28s] [111/183] installing libtzplatform-config-4.0-2.3 [ 28s] [112/183] installing perl-5.20.0-4.16 [ 29s] [113/183] installing libsystemd-231-7.4 [ 29s] [114/183] installing pcre-devel-8.39-3.5 [ 29s] [115/183] installing cmake-2.8.12.2-4.1 [ 30s] [116/183] installing libcynara-commons-0.14.10-2.7 [ 30s] [117/183] installing python-2.7.8-3.27 [ 31s] [118/183] installing gcc-6.2.1-8.1 [ 32s] [119/183] installing util-linux-2.28-3.2 [ 32s] [120/183] installing systemd-231-7.4 [ 32s] [121/183] installing build-mkbaselibs-20120927-3.1 [ 32s] [122/183] installing libtzplatform-config-devel-4.0-2.3 [ 33s] [123/183] installing qemu-accel-x86_64-aarch64-0.4-4.8 [ 38s] warning: %post(qemu-accel-x86_64-aarch64-0.4-4.8.aarch64) scriptlet failed, exit status 1 [ 38s] [124/183] installing autoconf-2.69-3.46 [ 38s] [125/183] installing python-xml-2.7.8-3.27 [ 38s] [126/183] installing systemd-devel-231-7.4 [ 38s] [127/183] installing util-linux-su-2.28-3.2 [ 38s] [128/183] installing libcynara-client-0.14.10-2.7 [ 38s] [129/183] installing libcynara-session-0.14.10-2.7 [ 38s] [130/183] installing sqlite-devel-3.18.0-5.4 [ 38s] [131/183] installing libdlog-0.6-2.2 [ 38s] [132/183] installing libtracker-1.0.1-3.1 [ 38s] [133/183] installing libdlog-devel-0.6-2.2 [ 38s] [134/183] installing libwayland-client-1.12.0-4.4 [ 38s] [135/183] installing automake-1.14.1-4.4 [ 38s] [136/183] installing libslp-db-util-0.1.1-2.2 [ 38s] [137/183] installing build-20120927-3.1 [ 38s] [138/183] installing capi-system-info-0.2.0-2.2 [ 38s] Running capi-system-info %posttrans script [ 38s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 38s] iniparser: cannot open /etc/info.ini [ 38s] [139/183] installing libwayland-extension-client-1.1.21-9.1 [ 38s] [140/183] installing libtool-2.4.2-4.39 [ 38s] [141/183] installing eo-1.16.0-10.10 [ 39s] [142/183] installing nss-3.23-3.35 [ 39s] [143/183] installing libgio-2.44.1-3.2 [ 39s] [144/183] installing gio-branding-upstream-2.44.1-3.2 [ 39s] [145/183] installing efl-1.16.0-10.10 [ 39s] [146/183] installing libjson-glib-1.2.0-2.4 [ 39s] [147/183] installing libsoftokn3-3.23-3.35 [ 39s] [148/183] installing glib2-tools-2.44.1-3.2 [ 39s] [149/183] installing libgirepository-1.44.1-2.5 [ 39s] [150/183] installing rpm-4.11.0.1-4.23 [ 39s] [151/183] installing buxton2-1.2.7-1.4 [ 40s] warning: user buxton does not exist - using root [ 40s] warning: group buxton does not exist - using root [ 40s] warning: user buxton does not exist - using root [ 40s] warning: group buxton does not exist - using root [ 40s] Running buxton2 %posttrans script [ 40s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 40s] /etc/buxton2/*: No such file or directory [ 40s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 40s] /var/lib/buxton2/*: No such file or directory [ 40s] [152/183] installing girepository-1.44.1-2.5 [ 40s] [153/183] installing bundle-0.2.0-2.2 [ 40s] [154/183] installing eina-1.16.0-10.10 [ 40s] [155/183] installing vconf-compat-1.2.7-1.4 [ 40s] [156/183] installing context-common-1.1.0-7.1 [ 40s] [157/183] installing glib2-devel-2.44.1-3.2 [ 40s] [158/183] installing rpm-build-4.11.0.1-4.23 [ 41s] [159/183] installing typelib-Json-1.2.0-2.4 [ 41s] [160/183] installing bundle-devel-0.2.0-2.2 [ 41s] [161/183] installing eventsystem-0.1.1-1.2 [ 41s] [162/183] installing vconf-compat-devel-1.2.7-1.4 [ 41s] [163/183] installing ecore-core-1.16.0-10.10 [ 41s] [164/183] installing libstorage-0.1.1-4.1 [ 41s] [165/183] installing capi-system-device-0.1.0-4.2 [ 41s] [166/183] installing pkgmgr-info-0.7.0-8.1 [ 41s] [167/183] installing json-glib-devel-1.2.0-2.4 [ 41s] [168/183] installing sensord-devel-4.0.0-13.1 [ 41s] [169/183] installing pkgmgr-info-parser-0.7.0-8.1 [ 41s] [170/183] installing pkgmgr-installer-0.6.2-4.3 [ 41s] [171/183] installing pkgmgr-client-0.6.2-4.3 [ 41s] [172/183] installing capi-appfw-package-manager-0.5.0-10.1 [ 41s] [173/183] installing aul-0.7.1-10.4 [ 41s] [174/183] installing app-svc-0.1.53-2.2 [ 41s] [175/183] installing capi-appfw-app-control-0.5.7-5.1 [ 41s] [176/183] installing capi-appfw-app-control-devel-0.5.7-5.1 [ 41s] [177/183] installing notification-0.3.23-8.1 [ 41s] [178/183] installing notification-devel-0.3.23-8.1 [ 41s] [179/183] installing alarm-server-0.5.9-5.3 [ 42s] Running alarm-server %posttrans script [ 42s] [180/183] installing libalarm-0.5.9-5.3 [ 42s] [181/183] installing libalarm-devel-0.5.9-5.3 [ 42s] [182/183] installing context-common-devel-1.1.0-7.1 [ 42s] [183/183] installing context-sensor-recorder-devel-1.0.1-4.1 [ 42s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 42s] build target is aarch64-tizen-linux [ 42s] ----------------------------------------------------------------- [ 42s] I have the following modifications for capi-system-sensor.spec: [ 42s] 5c5 [ 42s] < Release: 1 [ 42s] --- [ 42s] > Release: 6.1 [ 42s] ----------------------------------------------------------------- [ 42s] ----- building capi-system-sensor.spec (user abuild) [ 42s] ----------------------------------------------------------------- [ 42s] ----------------------------------------------------------------- [ 42s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/3d5600daeda57bfa5f14cbb956e920fc-capi-system-sensor' -ba /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 42s] Building target platforms: aarch64-tizen-linux [ 42s] Building for target aarch64-tizen-linux [ 42s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.rwDy2r [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + rm -rf capi-system-sensor-0.2.5 [ 42s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.2.5.tar.gz [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + cd capi-system-sensor-0.2.5 [ 42s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 42s] + exit 0 [ 42s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.54IKmD [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd capi-system-sensor-0.2.5 [ 43s] ++ uname -m [ 43s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 43s] + ref=/usr/lib/rpm [ 43s] + for s in guess sub [ 43s] ++ find -maxdepth 8 -name config.guess [ 43s] + for s in guess sub [ 43s] ++ find -maxdepth 8 -name config.sub [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + LDFLAGS= [ 43s] + export LDFLAGS [ 43s] + LD_AS_NEEDED=1 [ 43s] + export LD_AS_NEEDED [ 43s] ++ echo 0.2.5 [ 43s] ++ awk 'BEGIN {FS="."}{print $1}' [ 43s] + MAJORVER=0 [ 43s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.2.5 -DMAJORVER=0 -DSENSOR_RECORDER=on [ 43s] -- The C compiler identification is GNU 6.2.1 [ 43s] -- The CXX compiler identification is GNU 6.2.1 [ 43s] -- Check for working C compiler: /usr/bin/cc [ 43s] -- Check for working C compiler: /usr/bin/cc -- works [ 43s] -- Detecting C compiler ABI info [ 43s] -- Detecting C compiler ABI info - done [ 43s] -- Check for working CXX compiler: /usr/bin/c++ [ 43s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 43s] -- Detecting CXX compiler ABI info [ 43s] -- Detecting CXX compiler ABI info - done [ 43s] -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28") [ 43s] -- checking for module 'dlog sensor capi-base-common context-sensor-recorder-client' [ 43s] -- found dlog sensor capi-base-common context-sensor-recorder-client, version 1.0;4.0.0;0.4.13;1.0.1 [ 44s] -- Configuring done [ 44s] -- Generating done [ 44s] CMake Warning: [ 44s] Manually-specified variables were not used by the project: [ 44s] [ 44s] INCLUDE_INSTALL_DIR [ 44s] LIB_SUFFIX [ 44s] SHARE_INSTALL_PREFIX [ 44s] SYSCONF_INSTALL_DIR [ 44s] [ 44s] [ 44s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 44s] + /bin/make -j8 [ 44s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 44s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 44s] /bin/make -f CMakeFiles/Makefile2 all [ 44s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 44s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 44s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 44s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 44s] Scanning dependencies of target capi-system-sensor [ 44s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 44s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 44s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 44s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 1 [ 44s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 2 [ 44s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 3 [ 44s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 4 [ 44s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 5 [ 44s] [ 20%] [ 40%] [ 60%] [ 80%] [100%] Building C object CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o [ 44s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/geomagnetic_field.c [ 44s] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 44s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 44s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o [ 44s] /usr/bin/cc -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/fusion_util.c [ 44s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o [ 44s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor.cpp [ 44s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_recorder.cpp [ 44s] /usr/bin/c++ -Dcapi_system_sensor_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_provider.cpp [ 45s] Linking CXX shared library libcapi-system-sensor.so [ 45s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-sensor.dir/link.txt --verbose=1 [ 45s] /usr/bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -shared -Wl,-soname,libcapi-system-sensor.so.0 -o libcapi-system-sensor.so.0.2.5 CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -L/usr//usr/lib64 -lsensor -lvconf -lcontext-sensor-recorder-client -lcontext-client -lcontext-shared -ljson-glib-1.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcapi-base-common -ldlog -lsqlite3 [ 45s] /usr/bin/cmake -E cmake_symlink_library libcapi-system-sensor.so.0.2.5 libcapi-system-sensor.so.0 libcapi-system-sensor.so [ 45s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 1 2 3 4 5 [ 45s] [100%] Built target capi-system-sensor [ 45s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 45s] + exit 0 [ 45s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.C2XawU [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd capi-system-sensor-0.2.5 [ 45s] + LANG=C [ 45s] + export LANG [ 45s] + unset DISPLAY [ 45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 [ 45s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 [ 45s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 install [ 45s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 45s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 45s] /bin/make -f CMakeFiles/Makefile2 all [ 45s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 45s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 45s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 45s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] make[2]: Nothing to be done for 'CMakeFiles/capi-system-sensor.dir/build'. [ 45s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 1 2 3 4 5 [ 45s] [100%] Built target capi-system-sensor [ 45s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 45s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 45s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] make[1]: Nothing to be done for 'preinstall'. [ 45s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 45s] Install the project... [ 45s] /usr/bin/cmake -P cmake_install.cmake [ 45s] -- Install configuration: "" [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/lib64/pkgconfig/capi-system-sensor.pc [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/include/sensor/sensor.h [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/lib64/libcapi-system-sensor.so.0.2.5 [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/lib64/libcapi-system-sensor.so.0 [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/lib64/libcapi-system-sensor.so [ 45s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/share/info/dir [ 45s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 -regex '.*\.la$' [ 45s] + xargs rm -f -- [ 45s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 -regex '.*\.a$' [ 45s] + xargs rm -f -- [ 45s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 45s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/lib64/libcapi-system-sensor.so.0.2.5 [ 45s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 45s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 45s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 45s] 271 blocks [ 45s] + /usr/lib/rpm/check-buildroot [ 45s] + /usr/lib/rpm//brp-compress [ 45s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 45s] + /usr/lib/rpm/brp-python-hardlink [ 45s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 [ 45s] Processing files: capi-system-sensor-0.2.5-6.1.aarch64 [ 45s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 45s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 45s] [ 45s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ojz7Hc [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd capi-system-sensor-0.2.5 [ 45s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/share/licenses/capi-system-sensor [ 45s] + export LICENSEDIR [ 45s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/share/licenses/capi-system-sensor [ 45s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64/usr/share/licenses/capi-system-sensor [ 45s] + exit 0 [ 45s] Provides: capi-system-sensor = 0.2.5-6.1 capi-system-sensor(aarch-64) = 0.2.5-6.1 capi-system-sensor-profile_common = 0.2.5-6.1 capi-system-sensor-profile_ivi = 0.2.5-6.1 capi-system-sensor-profile_mobile = 0.2.5-6.1 capi-system-sensor-profile_tv = 0.2.5-6.1 capi-system-sensor-profile_wearable = 0.2.5-6.1 libcapi-system-sensor.so.0()(64bit) [ 45s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 45s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 45s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 45s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 45s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcontext-sensor-recorder-client.so.1()(64bit) libdlog.so.0()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libsensor.so.4()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) [ 45s] Processing files: capi-system-sensor-debugsource-0.2.5-6.1.aarch64 [ 45s] Provides: capi-system-sensor-debugsource = 0.2.5-6.1 capi-system-sensor-debugsource(aarch-64) = 0.2.5-6.1 [ 45s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 45s] Processing files: capi-system-sensor-devel-0.2.5-6.1.aarch64 [ 45s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 45s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 45s] [ 45s] Provides: capi-system-sensor-devel = 0.2.5-6.1 capi-system-sensor-devel(aarch-64) = 0.2.5-6.1 pkgconfig(capi-system-sensor) = 0.2.5 [ 45s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 45s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0()(64bit) pkgconfig(capi-base-common) pkgconfig(context-sensor-recorder-client) pkgconfig(dlog) pkgconfig(sensor) [ 45s] Processing files: capi-system-sensor-debuginfo-0.2.5-6.1.aarch64 [ 45s] Provides: capi-system-sensor-debuginfo = 0.2.5-6.1 capi-system-sensor-debuginfo(aarch-64) = 0.2.5-6.1 [ 45s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 45s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 [ 45s] warning: Could not canonicalize hostname: obspw03 [ 45s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-6.1.src.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-0.2.5-6.1.aarch64.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debugsource-0.2.5-6.1.aarch64.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-devel-0.2.5-6.1.aarch64.rpm [ 46s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debuginfo-0.2.5-6.1.aarch64.rpm [ 46s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.7mdnI2 [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd capi-system-sensor-0.2.5 [ 46s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-6.1.aarch64 [ 46s] + exit 0 [ 46s] ... checking for files with abuild user/group [ 46s] ... creating baselibs [ 46s] ... comparing built packages with the former built [ 46s] /usr/lib/build/pkg-diff.sh [ 46s] compare /.build.oldpackages/capi-system-sensor-0.2.5-5.1.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-6.1.src.rpm [ 46s] This is not a prerelease project. Compare the project name. [ 47s] comparing rpmtags [ 47s] comparing RELEASE [ 47s] comparing PROVIDES [ 47s] comparing scripts [ 47s] comparing filelist [ 47s] comparing file checksum [ 47s] RPM meta information is identical [ 47s] compare /.build.oldpackages/capi-system-sensor-0.2.5-5.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-0.2.5-6.1.aarch64.rpm [ 47s] Comparing capi-system-sensor-0.2.5-5.1.aarch64.rpm to capi-system-sensor-0.2.5-6.1.aarch64.rpm [ 47s] This is not a prerelease project. Compare the project name. [ 47s] comparing rpmtags [ 47s] --- /tmp/tmp.PDJdX96692/tmp.wTKQc96710 2017-06-16 00:09:03.421439516 +0000 [ 47s] +++ /tmp/tmp.PDJdX96692/tmp.nypVR96712 2017-06-16 00:09:03.433439419 +0000 [ 47s] @@ -8,4 +8,4 @@ [ 47s] cpio xz 5T [ 47s] [ 47s] (none) (none) (none) [ 47s] -obs://build.tizen.org/Tizen:Unified/standard/194493ef833cc40584bfa82e59461caa-capi-system-sensor Tizen:Unified [ 47s] +obs://build.tizen.org/Tizen:Unified/standard/3d5600daeda57bfa5f14cbb956e920fc-capi-system-sensor Tizen:Unified [ 47s] RPM meta information is different [ 47s] compare /.build.oldpackages/capi-system-sensor-debuginfo-0.2.5-5.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debuginfo-0.2.5-6.1.aarch64.rpm [ 47s] skipping -debuginfo package [ 47s] compare /.build.oldpackages/capi-system-sensor-debugsource-0.2.5-5.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debugsource-0.2.5-6.1.aarch64.rpm [ 47s] Comparing capi-system-sensor-debugsource-0.2.5-5.1.aarch64.rpm to capi-system-sensor-debugsource-0.2.5-6.1.aarch64.rpm [ 47s] This is not a prerelease project. Compare the project name. [ 47s] comparing rpmtags [ 47s] --- /tmp/tmp.DeKWh96732/tmp.ASykj96750 2017-06-16 00:09:03.657437601 +0000 [ 47s] +++ /tmp/tmp.DeKWh96732/tmp.iTRAf96752 2017-06-16 00:09:03.665437536 +0000 [ 47s] @@ -10,4 +10,4 @@ [ 47s] cpio xz 5T [ 47s] [ 47s] (none) (none) (none) [ 47s] -obs://build.tizen.org/Tizen:Unified/standard/194493ef833cc40584bfa82e59461caa-capi-system-sensor Tizen:Unified [ 47s] +obs://build.tizen.org/Tizen:Unified/standard/3d5600daeda57bfa5f14cbb956e920fc-capi-system-sensor Tizen:Unified [ 47s] RPM meta information is different [ 47s] compare /.build.oldpackages/capi-system-sensor-devel-0.2.5-5.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-devel-0.2.5-6.1.aarch64.rpm [ 47s] Comparing capi-system-sensor-devel-0.2.5-5.1.aarch64.rpm to capi-system-sensor-devel-0.2.5-6.1.aarch64.rpm [ 47s] This is not a prerelease project. Compare the project name. [ 47s] comparing rpmtags [ 47s] --- /tmp/tmp.QeneX96770/tmp.KnGvW96788 2017-06-16 00:09:03.869435880 +0000 [ 47s] +++ /tmp/tmp.QeneX96770/tmp.epRRu96790 2017-06-16 00:09:03.877435815 +0000 [ 47s] @@ -10,4 +10,4 @@ [ 47s] cpio xz 5T [ 47s] [ 47s] (none) (none) (none) [ 47s] -obs://build.tizen.org/Tizen:Unified/standard/194493ef833cc40584bfa82e59461caa-capi-system-sensor Tizen:Unified [ 47s] +obs://build.tizen.org/Tizen:Unified/standard/3d5600daeda57bfa5f14cbb956e920fc-capi-system-sensor Tizen:Unified [ 47s] RPM meta information is different [ 47s] [ 47s] obspw03 finished "build capi-system-sensor.spec" at Fri Jun 16 00:09:03 UTC 2017. [ 47s] Retried build at Tue Jun 20 18:10:06 2017 returned same result, skipped