[ 0s] Memory limit set to 82442244KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_5 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw20 started "build _service:gbs:xmlto.spec" at Fri May 19 23:54:30 UTC 2017. [ 0s] [ 0s] Building xmlto for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '8136f1018e524beb7949ff93ec85212c' [ 0s] [ 0s] processing recipe /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlto.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlto.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_5/.build.rpmlist /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlto.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/5/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 2s] [6/40] preinstalling diffutils... [ 2s] [7/40] preinstalling grep... [ 2s] [8/40] preinstalling libattr... [ 2s] [9/40] preinstalling libbz2... [ 2s] [10/40] preinstalling libcap... [ 2s] [11/40] preinstalling libelf... [ 2s] [12/40] preinstalling libfreebl3... [ 2s] [13/40] preinstalling libgcc... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] ln: creating symbolic link `/usr/lib64/gcc/aarch64-tizen-linux-gnu/6.2.1/liblto_plugin.so': No such file or directory [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/103] installing libmagic-data-5.28-4.6 [ 9s] [2/103] installing setup-0.9-3.22 [ 9s] [3/103] installing terminfo-base-5.9-3.33 [ 9s] [4/103] installing filesystem-3.1-3.2 [ 9s] [5/103] installing glibc-2.24-3.19 [ 9s] [6/103] installing bash-3.2.57-4.1 [ 9s] [7/103] installing binutils-2.27-4.27 [ 10s] [8/103] installing cpio-2.11-3.3 [ 10s] [9/103] installing diffutils-3.3-3.1 [ 10s] [10/103] installing fdupes-1.40-3.36 [ 10s] [11/103] installing findutils-4.3.8-3.36 [ 10s] [12/103] installing hostname-3.12-4.1 [ 10s] [13/103] installing libatomic-6.2.1-6.2 [ 10s] [14/103] installing libattr-2.4.47-3.34 [ 10s] [15/103] installing libbz2-1.0.6-4.34 [ 10s] [16/103] installing libcap-2.24-3.31 [ 10s] [17/103] installing libelf-0.153-3.16 [ 10s] [18/103] installing libext2fs-1.42.13-3.3 [ 10s] [19/103] installing libfreebl3-3.23-3.29 [ 11s] [20/103] installing libgcc-6.2.1-6.2 [ 11s] [21/103] installing libgomp-6.2.1-6.2 [ 11s] [22/103] installing libgpg-error-1.13-4.43 [ 11s] [23/103] installing libitm-6.2.1-6.2 [ 11s] [24/103] installing libltdl-2.4.2-4.33 [ 11s] [25/103] installing liblua-5.1.4-3.7 [ 11s] [26/103] installing liblzma-5.2.2-3.33 [ 11s] [27/103] installing libpcre-8.39-3.4 [ 11s] [28/103] installing libpopt-1.16-4.8 [ 11s] [29/103] installing libsmack-1.3.0-3.32 [ 11s] [30/103] installing libsmartcols-2.28-3.1 [ 12s] [31/103] installing libsqlite-3.18.0-5.2 [ 12s] [32/103] installing libuuid-2.28-3.1 [ 12s] [33/103] installing m4-1.4.17-3.1 [ 12s] [34/103] installing net-tools-2.0_20121208git-3.1 [ 12s] [35/103] installing nspr-4.12-3.8 [ 12s] [36/103] installing patch-2.7-3.8 [ 12s] [37/103] installing pkg-config-0.28-4.35 [ 12s] [38/103] installing sed-4.1c-3.1 [ 12s] [39/103] installing update-alternatives-1.18.15-3.1 [ 12s] [40/103] installing which-2.20-6.1 [ 12s] [41/103] installing zlib-1.2.8-3.38 [ 12s] [42/103] installing libncurses-5.9-3.33 [ 12s] [43/103] installing build-compare-2015.04.28-3.25 [ 12s] [44/103] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 14s] [45/103] installing coreutils-6.9-3.1 [ 14s] [46/103] installing cpp-6.2.1-6.2 [ 14s] [47/103] installing gawk-3.1.5-3.1 [ 14s] [48/103] installing gcc-c++-6.2.1-6.2 [ 15s] [49/103] installing grep-2.5.2-3.1 [ 15s] [50/103] installing less-466-8.1 [ 15s] [51/103] installing libacl-2.2.52-3.41 [ 15s] [52/103] installing libasm-0.153-3.16 [ 15s] [53/103] installing libblkid-2.28-3.1 [ 15s] [54/103] installing libgcrypt-1.7.6-4.1 [ 15s] [55/103] installing libgfortran-6.2.1-6.2 [ 16s] [56/103] installing libreadline-5.2-3.32 [ 16s] [57/103] installing libstdc++-6.2.1-6.2 [ 16s] [58/103] installing make-4.0-3.7 [ 16s] [59/103] installing nss-certs-3.23-3.29 [ 16s] [60/103] installing procps-ng-3.3.9-3.2 [ 16s] [61/103] installing smack-1.3.0-3.32 [ 16s] [62/103] installing bzip2-1.0.6-4.34 [ 16s] [63/103] installing flex-2.5.37-4.13 [ 16s] [64/103] installing libmagic-5.28-4.6 [ 16s] [65/103] installing libxml2-2.9.4-4.33 [ 16s] [66/103] installing xz-5.2.2-3.33 [ 17s] [67/103] installing libdw-0.153-3.16 [ 17s] [68/103] installing libstdc++-devel-6.2.1-6.2 [ 17s] [69/103] installing file-5.28-4.6 [ 17s] [70/103] installing libmount-2.28-3.1 [ 17s] [71/103] installing linux-glibc-devel-3.10-3.37 [ 17s] [72/103] installing tar-1.17-3.1 [ 18s] [73/103] installing db4-4.8.30.NC-3.38 [ 18s] [74/103] installing glibc-locale-2.24-3.19 [ 18s] [75/103] installing gzip-1.3.12-3.31 [ 18s] [76/103] installing libcc1-6.2.1-6.2 [ 18s] [77/103] installing libfdisk1-2.28-3.1 [ 18s] [78/103] installing libubsan-6.2.1-6.2 [ 18s] [79/103] installing libxml2-tools-2.9.4-4.33 [ 18s] [80/103] installing pam-1.1.6-3.2 [ 19s] [81/103] installing tzdata-2016i-4.1 [ 19s] [82/103] installing elfutils-0.153-3.16 [ 19s] [83/103] installing libxslt-1.1.29-3.2 [ 19s] [84/103] installing glibc-devel-2.24-3.19 [ 19s] [85/103] installing perl-5.20.0-4.13 [ 20s] [86/103] installing sgml-skel-0.6-3.1 [ 20s] [87/103] installing gcc-6.2.1-6.2 [ 21s] [88/103] installing util-linux-2.28-3.1 [ 21s] [89/103] installing build-mkbaselibs-20120927-3.1 [ 21s] [90/103] installing iso_ent-2000.11.03-2.1 [ 21s] [91/103] installing qemu-accel-x86_64-aarch64-0.4-3.14 [ 26s] warning: %post(qemu-accel-x86_64-aarch64-0.4-3.14.aarch64) scriptlet failed, exit status 1 [ 26s] [92/103] installing autoconf-2.69-3.40 [ 26s] [93/103] installing util-linux-su-2.28-3.1 [ 26s] [94/103] installing xmlcharent-0.3-2.1 [ 26s] [95/103] installing automake-1.14.1-3.30 [ 26s] [96/103] installing build-20120927-3.1 [ 27s] [97/103] installing docbook_4-4.5-2.1 [ 27s] [98/103] installing libtool-2.4.2-4.33 [ 27s] [99/103] installing docbook-xsl-stylesheets-1.78.1-2.1 [ 28s] [100/103] installing nss-3.23-3.29 [ 28s] [101/103] installing libsoftokn3-3.23-3.29 [ 28s] [102/103] installing rpm-4.11.0.1-4.17 [ 29s] [103/103] installing rpm-build-4.11.0.1-4.17 [ 29s] removing nis flags from /var/cache/build/root_5/etc/nsswitch.conf... [ 29s] now finalizing build dir... [ 30s] build target is aarch64-tizen-linux [ 30s] ----------------------------------------------------------------- [ 30s] I have the following modifications for xmlto.spec: [ 30s] 4c4 [ 30s] < Release: 0 [ 30s] --- [ 30s] > Release: 2.2 [ 30s] ----------------------------------------------------------------- [ 30s] ----- building xmlto.spec (user abuild) [ 30s] ----------------------------------------------------------------- [ 30s] ----------------------------------------------------------------- [ 30s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/8136f1018e524beb7949ff93ec85212c-xmlto' -ba /home/abuild/rpmbuild/SOURCES/xmlto.spec [ 30s] Building target platforms: aarch64-tizen-linux [ 30s] Building for target aarch64-tizen-linux [ 30s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.685AlU [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + rm -rf xmlto-0.0.25 [ 30s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/xmlto-0.0.25.tar.bz2 [ 30s] + /bin/tar -xf - [ 30s] + STATUS=0 [ 30s] + '[' 0 -ne 0 ']' [ 30s] + cd xmlto-0.0.25 [ 30s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 30s] + echo 'Patch #0 (0001-xmlto-nonvoid.patch):' [ 30s] Patch #0 (0001-xmlto-nonvoid.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-xmlto-nonvoid.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file xmlif/xmlif.c [ 30s] patching file xmlif/xmlif.l [ 30s] + echo 'Patch #1 (0002-xmlto-overflow.patch):' [ 30s] Patch #1 (0002-xmlto-overflow.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-xmlto-overflow.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file xmlif/xmlif.c [ 30s] + echo 'Patch #2 (0003-xmlto-xsltopts.patch):' [ 30s] Patch #2 (0003-xmlto-xsltopts.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-xmlto-xsltopts.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file xmlto.in [ 30s] + echo 'Patch #3 (0004-xmlto-codecleanup.patch):' [ 30s] Patch #3 (0004-xmlto-codecleanup.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-xmlto-codecleanup.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file xmlif/xmlif.l [ 30s] + echo 'Patch #4 (0005-xmlto-lynx-empty-file.patch):' [ 30s] Patch #4 (0005-xmlto-lynx-empty-file.patch): [ 30s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0005-xmlto-lynx-empty-file.patch [ 30s] + /bin/patch -p1 --fuzz=2 [ 30s] patching file xmlto.in [ 30s] + cp /home/abuild/rpmbuild/SOURCES/xmlto.manifest . [ 30s] + rm -f xmlif/xmlif.c [ 30s] + exit 0 [ 30s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Hjzmqc [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd xmlto-0.0.25 [ 30s] ++ uname -m [ 30s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 30s] + ref=/usr/lib/rpm [ 30s] + for s in guess sub [ 30s] ++ find -maxdepth 8 -name config.guess [ 30s] + for s in guess sub [ 30s] ++ find -maxdepth 8 -name config.sub [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 30s] + export CFLAGS [ 30s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 30s] + export CXXFLAGS [ 30s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 30s] + export FFLAGS [ 30s] + LDFLAGS= [ 30s] + export LDFLAGS [ 30s] + LD_AS_NEEDED=1 [ 30s] + export LD_AS_NEEDED [ 30s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 30s] + export CFLAGS [ 30s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 30s] + export CXXFLAGS [ 30s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 30s] + export FFLAGS [ 30s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 31s] checking for a BSD-compatible install... /bin/install -c [ 32s] checking whether build environment is sane... yes [ 32s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 32s] checking for gawk... gawk [ 32s] checking whether make sets $(MAKE)... yes [ 32s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 32s] checking whether the C compiler works... yes [ 32s] checking for C compiler default output file name... a.out [ 32s] checking for suffix of executables... [ 32s] checking whether we are cross compiling... no [ 32s] checking for suffix of object files... o [ 32s] checking whether we are using the GNU C compiler... yes [ 32s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 32s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 32s] checking for style of include used by make... GNU [ 32s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 32s] checking whether aarch64-tizen-linux-gnu-gcc and cc understand -c and -o together... yes [ 32s] checking for flex... flex [ 32s] checking lex output file root... lex.yy [ 33s] checking lex library... -lfl [ 33s] checking whether yytext is a pointer... yes [ 33s] checking for mktemp... mktemp [ 33s] checking for find... find [ 33s] checking for bash... /bin/sh [ 33s] checking for getopt... getopt [ 33s] checking for long options support in getopt... yes [ 33s] checking for paperconf... paperconf [ 33s] checking for locale... /bin/locale [ 33s] checking for xmllint... /bin/xmllint [ 33s] checking for xsltproc... xsltproc [ 33s] checking for dblatex... dblatex [ 33s] checking for fop... fop [ 33s] checking for xmltex... xmltex [ 33s] checking for pdfxmltex... pdfxmltex [ 33s] checking for default backend... DEFAULT [ 33s] checking for lynx... lynx [ 33s] checking for links... links [ 33s] checking for w3m... w3m [ 33s] checking for tail... /bin/tail [ 33s] checking for grep... /bin/grep [ 33s] checking for cp... /bin/cp [ 33s] checking for zip... zip [ 33s] checking for default web browser... w3m [ 34s] configure: creating ./config.status [ 34s] config.status: creating Makefile [ 34s] config.status: creating xmlto [ 34s] config.status: creating xmlto.spec [ 34s] config.status: creating config.h [ 34s] config.status: executing depfiles commands [ 34s] + make -j4 [ 34s] make all-am [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 34s] /bin/sh ./ylwrap xmlif/xmlif.l lex.yy.c xmlif/xmlif.c -- flex [ 34s] depbase=`echo xmlif/xmlif.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ [ 34s] aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -MT xmlif/xmlif.o -MD -MP -MF $depbase.Tpo -c -o xmlif/xmlif.o xmlif/xmlif.c &&\ [ 34s] mv -f $depbase.Tpo $depbase.Po [ 34s] xmlif/xmlif.c:1995:16: warning: 'input' defined but not used [-Wunused-function] [ 34s] static int input (void) [ 34s] ^~~~~ [ 34s] xmlif/xmlif.c:1954:17: warning: 'yyunput' defined but not used [-Wunused-function] [ 34s] static void yyunput (int c, register char * yy_bp ) [ 34s] ^~~~~~~ [ 35s] aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -o xmlif/xmlif xmlif/xmlif.o [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 35s] + exit 0 [ 35s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.eI5AsJ [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd xmlto-0.0.25 [ 35s] + LANG=C [ 35s] + export LANG [ 35s] + unset DISPLAY [ 35s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 [ 35s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 [ 35s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 install [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 35s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/bin" [ 35s] /bin/install -c xmlif/xmlif '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/bin' [ 35s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/bin" [ 35s] /bin/install -c xmlto '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/bin' [ 35s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/man/man1" [ 35s] /bin/install -c -m 644 man/man1/xmlto.1 man/man1/xmlif.1 '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/man/man1' [ 35s] test -z "/usr/share/xmlto" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto" [ 35s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook' [ 35s] /bin/install -c -m 644 format/docbook/dvi format/docbook/epub format/docbook/fo format/docbook/html format/docbook/html-nochunks format/docbook/xhtml format/docbook/xhtml-nochunks format/docbook/man format/docbook/pdf format/docbook/ps format/docbook/txt format/docbook/htmlhelp format/docbook/javahelp format/docbook/mif format/docbook/pcl format/docbook/svg format/docbook/awt '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook' [ 35s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1' [ 35s] /bin/install -c -m 644 format/xhtml1/dvi format/xhtml1/fo format/xhtml1/pdf format/xhtml1/ps format/xhtml1/txt format/xhtml1/awt format/xhtml1/mif format/xhtml1/pcl format/xhtml1/svg '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1' [ 35s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/fo' [ 35s] /bin/install -c -m 644 format/fo/ps format/fo/awt format/fo/mif format/fo/pcl format/fo/svg format/fo/txt format/fo/dvi format/fo/pdf '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/fo' [ 35s] /bin/install -c -m 644 xmlto.mak '/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/.' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlto-0.0.25' [ 35s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/info/dir [ 35s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 -regex '.*\.la$' [ 35s] + xargs rm -f -- [ 35s] + find /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 -regex '.*\.a$' [ 35s] + xargs rm -f -- [ 35s] + mkdir /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/xsl [ 35s] + _target= [ 35s] + _symlinks=0 [ 35s] + _files=() [ 35s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/awt [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/mif [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z [ 35s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/awt [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/mif [ 35s] ++ sort [ 35s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/awt [ 35s] ++ seq 1 1 [ 35s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 35s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/mif [ 35s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/mif [ 35s] + test 0 = 1 [ 35s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/mif [ 35s] + _files=() [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/ps [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z [ 35s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ sort [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/ps [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 35s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/dvi [ 35s] ++ seq 1 2 [ 35s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 35s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 35s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 35s] + test 0 = 1 [ 35s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pdf [ 35s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 35s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/ps [ 35s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/ps [ 35s] + test 0 = 1 [ 35s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/dvi /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/ps [ 35s] + _files=() [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/svg [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z [ 35s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/svg [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 35s] ++ sort [ 35s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pcl [ 35s] ++ seq 1 1 [ 35s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 35s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/svg [ 35s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/svg [ 35s] + test 0 = 1 [ 35s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/xhtml1/svg [ 35s] + _files=() [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/awt [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/mif [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z [ 35s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/awt [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/mif [ 35s] ++ sort [ 35s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/awt [ 35s] ++ seq 1 1 [ 35s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 35s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/mif [ 35s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/mif [ 35s] + test 0 = 1 [ 35s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/awt /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/mif [ 35s] + _files=() [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/ps [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pdf [ 35s] + _files+=($_file) [ 35s] + read _file [ 35s] + test -z [ 35s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 35s] ++ sort [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/ps [ 35s] ++ for i in '${_files[*]}' [ 35s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pdf [ 35s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pdf [ 35s] ++ seq 1 1 [ 35s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 35s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/ps [ 35s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/ps [ 35s] + test 0 = 1 [ 35s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pdf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/ps [ 36s] + _files=() [ 36s] + read _file [ 36s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/svg [ 36s] + _files+=($_file) [ 36s] + read _file [ 36s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pcl [ 36s] + _files+=($_file) [ 36s] + read _file [ 36s] + test -z [ 36s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 36s] ++ for i in '${_files[*]}' [ 36s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/svg [ 36s] ++ for i in '${_files[*]}' [ 36s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pcl [ 36s] ++ sort [ 36s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pcl [ 36s] ++ seq 1 1 [ 36s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 36s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/svg [ 36s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/svg [ 36s] + test 0 = 1 [ 36s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/pcl /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/xmlto/format/docbook/svg [ 36s] + _files=() [ 36s] + read _file [ 36s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlto-0.0.25 [ 36s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/bin/xmlif [ 36s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 36s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 36s] cpio: xmlto-0.0.25/xmlif.l: Cannot stat: No such file or directory [ 36s] 184 blocks [ 36s] + /usr/lib/rpm/check-buildroot [ 36s] + /usr/lib/rpm//brp-compress [ 36s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 37s] + /usr/lib/rpm/brp-python-hardlink [ 37s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 [ 37s] Processing files: xmlto-0.0.25-2.2.aarch64 [ 37s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 37s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 37s] [ 37s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.VzhZpm [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd xmlto-0.0.25 [ 37s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/doc/packages/xmlto [ 37s] + export DOCDIR [ 37s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/doc/packages/xmlto [ 37s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64/usr/share/doc/packages/xmlto [ 37s] + exit 0 [ 37s] Provides: xmlto = 0.0.25-2.2 xmlto(aarch-64) = 0.0.25-2.2 [ 37s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 37s] Requires: /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 37s] Processing files: xmlto-debugsource-0.0.25-2.2.aarch64 [ 37s] Provides: xmlto-debugsource = 0.0.25-2.2 xmlto-debugsource(aarch-64) = 0.0.25-2.2 [ 37s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 37s] Processing files: xmlto-debuginfo-0.0.25-2.2.aarch64 [ 37s] Provides: xmlto-debuginfo = 0.0.25-2.2 xmlto-debuginfo(aarch-64) = 0.0.25-2.2 [ 37s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 37s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 [ 37s] warning: Could not canonicalize hostname: obsnw20 [ 37s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlto-0.0.25-2.2.src.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-0.0.25-2.2.aarch64.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debugsource-0.0.25-2.2.aarch64.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debuginfo-0.0.25-2.2.aarch64.rpm [ 37s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.tue2eC [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd xmlto-0.0.25 [ 37s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlto-0.0.25-2.2.aarch64 [ 37s] + exit 0 [ 37s] ... checking for files with abuild user/group [ 37s] ... creating baselibs [ 38s] ... comparing built packages with the former built [ 38s] /usr/lib/build/pkg-diff.sh [ 38s] compare /.build.oldpackages/xmlto-0.0.25-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/xmlto-0.0.25-2.2.src.rpm [ 38s] This is not a prerelease project. Compare the project name. [ 38s] comparing rpmtags [ 38s] comparing RELEASE [ 38s] comparing PROVIDES [ 38s] comparing scripts [ 38s] comparing filelist [ 38s] comparing file checksum [ 39s] RPM meta information is identical [ 39s] compare /.build.oldpackages/xmlto-0.0.25-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlto-0.0.25-2.2.aarch64.rpm [ 39s] Comparing xmlto-0.0.25-2.1.aarch64.rpm to xmlto-0.0.25-2.2.aarch64.rpm [ 39s] This is not a prerelease project. Compare the project name. [ 39s] comparing rpmtags [ 39s] comparing RELEASE [ 39s] comparing PROVIDES [ 39s] comparing scripts [ 39s] comparing filelist [ 39s] comparing file checksum [ 39s] creating rename script [ 39s] RPM meta information is identical [ 39s] compare /.build.oldpackages/xmlto-debuginfo-0.0.25-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debuginfo-0.0.25-2.2.aarch64.rpm [ 39s] skipping -debuginfo package [ 39s] compare /.build.oldpackages/xmlto-debugsource-0.0.25-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlto-debugsource-0.0.25-2.2.aarch64.rpm [ 40s] Comparing xmlto-debugsource-0.0.25-2.1.aarch64.rpm to xmlto-debugsource-0.0.25-2.2.aarch64.rpm [ 40s] This is not a prerelease project. Compare the project name. [ 40s] comparing rpmtags [ 40s] comparing RELEASE [ 40s] comparing PROVIDES [ 40s] comparing scripts [ 40s] comparing filelist [ 40s] comparing file checksum [ 40s] creating rename script [ 40s] RPM meta information is identical [ 40s] compare validated built as identical ! [ 40s] [ 40s] obsnw20 finished "build xmlto.spec" at Fri May 19 23:55:10 UTC 2017. [ 40s] Retried build at Fri Jun 2 16:35:06 2017 returned same result, skipped Retried build at Fri Jun 9 23:39:52 2017 returned same result, skipped