[ 0s] Memory limit set to 87947400KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw16 started "build _service:gbs:kbd.spec" at Fri May 19 23:53:27 UTC 2017. [ 0s] [ 0s] Building kbd for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'ee5504853ae4112fa0140438ab2d436e' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:kbd.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 8s] [1/100] installing libmagic-data-5.28-4.11 [ 8s] [2/100] installing setup-0.9-3.20 [ 8s] [3/100] installing terminfo-base-5.9-3.40 [ 8s] [4/100] installing filesystem-3.1-3.2 [ 8s] [5/100] installing glibc-2.24-3.20 [ 8s] [6/100] installing libatomic-6.2.1-6.2 [ 8s] [7/100] installing libgcc-6.2.1-6.2 [ 8s] [8/100] installing bash-3.2.57-4.2 [ 8s] [9/100] installing binutils-2.27-4.28 [ 9s] [10/100] installing check-0.9.8-1.4 [ 9s] [11/100] installing cpio-2.11-3.4 [ 9s] [12/100] installing diffutils-3.3-3.2 [ 9s] [13/100] installing fdupes-1.40-3.43 [ 9s] [14/100] installing findutils-4.3.8-3.45 [ 9s] [15/100] installing hostname-3.12-4.2 [ 9s] [16/100] installing libattr-2.4.47-3.42 [ 9s] [17/100] installing libbz2-1.0.6-4.41 [ 9s] [18/100] installing libcap-2.24-3.39 [ 9s] [19/100] installing libelf-0.153-3.18 [ 9s] [20/100] installing libext2fs-1.42.13-3.4 [ 9s] [21/100] installing libfreebl3-3.23-3.37 [ 9s] [22/100] installing libgfortran-6.2.1-6.2 [ 9s] [23/100] installing libgomp-6.2.1-6.2 [ 9s] [24/100] installing libitm-6.2.1-6.2 [ 9s] [25/100] installing libltdl-2.4.2-4.35 [ 9s] [26/100] installing liblua-5.1.4-3.7 [ 9s] [27/100] installing liblzma-5.2.2-3.41 [ 9s] [28/100] installing libpcre-8.39-3.5 [ 9s] [29/100] installing libpopt-1.16-4.8 [ 9s] [30/100] installing libsmack-1.3.0-3.40 [ 10s] [31/100] installing libsmartcols-2.28-3.2 [ 10s] [32/100] installing libsqlite-3.18.0-5.3 [ 10s] [33/100] installing libstdc++-6.2.1-6.2 [ 10s] [34/100] installing libuuid-2.28-3.2 [ 10s] [35/100] installing m4-1.4.17-3.2 [ 10s] [36/100] installing net-tools-2.0_20121208git-3.2 [ 10s] [37/100] installing nspr-4.12-3.8 [ 10s] [38/100] installing patch-2.7-3.8 [ 10s] [39/100] installing pkg-config-0.28-4.43 [ 10s] [40/100] installing sed-4.1c-3.2 [ 10s] [41/100] installing update-alternatives-1.18.15-3.2 [ 10s] [42/100] installing which-2.20-6.2 [ 10s] [43/100] installing zlib-1.2.8-3.45 [ 10s] [44/100] installing libncurses-5.9-3.40 [ 10s] [45/100] installing build-compare-2015.04.28-3.26 [ 10s] [46/100] installing libstdc++-devel-6.2.1-6.2 [ 10s] [47/100] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 12s] [48/100] installing cpp-6.2.1-6.2 [ 12s] [49/100] installing gcc-c++-6.2.1-6.2 [ 13s] [50/100] installing coreutils-6.9-3.2 [ 13s] [51/100] installing db4-4.8.30.NC-3.47 [ 13s] [52/100] installing gawk-3.1.5-3.2 [ 13s] [53/100] installing grep-2.5.2-3.2 [ 13s] [54/100] installing less-466-8.2 [ 13s] [55/100] installing libacl-2.2.52-3.46 [ 13s] [56/100] installing libasm-0.153-3.18 [ 13s] [57/100] installing libblkid-2.28-3.2 [ 13s] [58/100] installing libcc1-6.2.1-6.2 [ 13s] [59/100] installing libreadline-5.2-3.39 [ 13s] [60/100] installing libubsan-6.2.1-6.2 [ 13s] [61/100] installing make-4.0-3.7 [ 13s] [62/100] installing nss-certs-3.23-3.37 [ 13s] [63/100] installing procps-ng-3.3.9-3.3 [ 14s] [64/100] installing smack-1.3.0-3.40 [ 14s] [65/100] installing bison-2.7.1-3.43 [ 14s] [66/100] installing bzip2-1.0.6-4.41 [ 14s] [67/100] installing flex-2.5.37-4.15 [ 14s] [68/100] installing gettext-runtime-0.19.7-3.17 [ 14s] [69/100] installing libmagic-5.28-4.11 [ 14s] [70/100] installing libxml2-2.9.4-4.39 [ 14s] [71/100] installing xz-5.2.2-3.41 [ 14s] [72/100] installing libdw-0.153-3.18 [ 14s] [73/100] installing linux-glibc-devel-3.10-3.45 [ 14s] [74/100] installing file-5.28-4.11 [ 14s] [75/100] installing glibc-locale-2.24-3.20 [ 15s] [76/100] installing libmount-2.28-3.2 [ 15s] [77/100] installing tar-1.17-3.2 [ 15s] [78/100] installing gettext-tools-0.19.7-3.17 [ 15s] [79/100] installing gzip-1.3.12-3.39 [ 15s] [80/100] installing libfdisk1-2.28-3.2 [ 15s] [81/100] installing pam-1.1.6-3.3 [ 15s] [82/100] installing perl-5.20.0-4.13 [ 16s] [83/100] installing tzdata-2016i-4.2 [ 16s] [84/100] installing elfutils-0.153-3.18 [ 16s] [85/100] installing gcc-6.2.1-6.2 [ 17s] [86/100] installing build-mkbaselibs-20120927-3.1 [ 17s] [87/100] installing glibc-devel-2.24-3.20 [ 17s] [88/100] installing qemu-accel-x86_64-armv7l-0.4-3.15 [ 22s] warning: %post(qemu-accel-x86_64-armv7l-0.4-3.15.armv7l) scriptlet failed, exit status 1 [ 22s] [89/100] installing autoconf-2.69-3.48 [ 23s] [90/100] installing pam-devel-1.1.6-3.3 [ 23s] [91/100] installing util-linux-2.28-3.2 [ 23s] [92/100] installing check-devel-0.9.8-1.4 [ 23s] [93/100] installing automake-1.14.1-3.32 [ 23s] [94/100] installing util-linux-su-2.28-3.2 [ 23s] [95/100] installing build-20120927-3.1 [ 23s] [96/100] installing libtool-2.4.2-4.35 [ 23s] [97/100] installing nss-3.23-3.37 [ 23s] [98/100] installing libsoftokn3-3.23-3.37 [ 23s] [99/100] installing rpm-4.11.0.1-4.22 [ 23s] [100/100] installing rpm-build-4.11.0.1-4.22 [ 23s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 23s] now finalizing build dir... [ 24s] build target is armv7l-tizen-linux [ 24s] ----------------------------------------------------------------- [ 24s] I have the following modifications for kbd.spec: [ 24s] 4c4 [ 24s] < Release: 0 [ 24s] --- [ 24s] > Release: 2.2 [ 24s] 20c20 [ 24s] < BuildRequires: gettext [ 24s] --- [ 24s] > BuildRequires: gettext-tools [ 24s] 111a112 [ 24s] > %changelog [ 24s] ----------------------------------------------------------------- [ 24s] ----- building kbd.spec (user abuild) [ 24s] ----------------------------------------------------------------- [ 24s] ----------------------------------------------------------------- [ 24s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/ee5504853ae4112fa0140438ab2d436e-kbd' -ba /home/abuild/rpmbuild/SOURCES/kbd.spec [ 24s] Building target platforms: armv7l-tizen-linux [ 24s] Building for target armv7l-tizen-linux [ 24s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.V64zox [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + rm -rf kbd-2.0.2 [ 24s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-2.0.2.tar.bz2 [ 24s] + /bin/tar -xf - [ 24s] + STATUS=0 [ 24s] + '[' 0 -ne 0 ']' [ 24s] + cd kbd-2.0.2 [ 24s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latsun-fonts.tar.bz2 [ 24s] + /bin/tar -xf - [ 24s] + STATUS=0 [ 24s] + '[' 0 -ne 0 ']' [ 24s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latarcyrheb-16-fixed.tar.bz2 [ 24s] + /bin/tar -xf - [ 24s] + STATUS=0 [ 24s] + '[' 0 -ne 0 ']' [ 24s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/fr-dvorak.tar.bz2 [ 24s] + /bin/tar -xf - [ 24s] + STATUS=0 [ 24s] + '[' 0 -ne 0 ']' [ 24s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kbd-latarcyrheb-32.tar.bz2 [ 24s] + /bin/tar -xf - [ 24s] + STATUS=0 [ 24s] + '[' 0 -ne 0 ']' [ 24s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 24s] + cp /home/abuild/rpmbuild/SOURCES/kbd.manifest . [ 24s] + pushd data/keymaps/i386 [ 24s] ~/rpmbuild/BUILD/kbd-2.0.2/data/keymaps/i386 ~/rpmbuild/BUILD/kbd-2.0.2 [ 24s] + mv qwerty/fi.map qwerty/fi-old.map [ 24s] + cp qwerty/pt-latin9.map qwerty/pt.map [ 24s] + cp qwerty/sv-latin1.map qwerty/se-latin1.map [ 24s] + mv azerty/fr.map azerty/fr-old.map [ 24s] + cp azerty/fr-latin9.map azerty/fr.map [ 24s] + cp azerty/fr-latin9.map azerty/fr-latin0.map [ 24s] + mv dvorak/no.map dvorak/no-dvorak.map [ 24s] + mv fgGIod/trf.map fgGIod/trf-fgGIod.map [ 24s] + mv olpc/es.map olpc/es-olpc.map [ 24s] + mv olpc/pt.map olpc/pt-olpc.map [ 24s] + mv qwerty/cz.map qwerty/cz-qwerty.map [ 24s] + popd [ 24s] ~/rpmbuild/BUILD/kbd-2.0.2 [ 24s] + pushd po [ 24s] ~/rpmbuild/BUILD/kbd-2.0.2/po ~/rpmbuild/BUILD/kbd-2.0.2 [ 24s] + rm -f gr.po gr.gmo [ 24s] + popd [ 24s] ~/rpmbuild/BUILD/kbd-2.0.2 [ 24s] + exit 0 [ 24s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Iwt0lk [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + cd kbd-2.0.2 [ 24s] ++ uname -m [ 24s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 24s] + LANG=C [ 24s] + export LANG [ 24s] + unset DISPLAY [ 24s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 24s] + export CFLAGS [ 24s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 24s] + export CXXFLAGS [ 24s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 24s] + export FFLAGS [ 24s] + LDFLAGS= [ 24s] + export LDFLAGS [ 24s] + LD_AS_NEEDED=1 [ 24s] + export LD_AS_NEEDED [ 24s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 24s] + export CFLAGS [ 24s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 24s] + export CXXFLAGS [ 24s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 24s] + export FFLAGS [ 24s] + autoreconf -v --install --force [ 27s] autoreconf: Entering directory `.' [ 27s] autoreconf: running: autopoint --force [ 32s] Copying file config/mkinstalldirs [ 32s] Copying file po/Makefile.in.in [ 32s] Copying file po/Makevars.template [ 32s] Copying file po/Rules-quot [ 32s] Copying file po/boldquot.sed [ 32s] Copying file po/en@boldquot.header [ 32s] Copying file po/en@quot.header [ 32s] Copying file po/insert-header.sin [ 32s] Copying file po/quot.sed [ 32s] Copying file po/remove-potcdate.sin [ 33s] autoreconf: running: aclocal --force -I m4 [ 46s] autoreconf: configure.ac: tracing [ 47s] autoreconf: running: libtoolize --copy --force [ 47s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config'. [ 47s] libtoolize: copying file `config/ltmain.sh' [ 47s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 47s] libtoolize: copying file `m4/libtool.m4' [ 47s] libtoolize: copying file `m4/ltoptions.m4' [ 47s] libtoolize: copying file `m4/ltsugar.m4' [ 47s] libtoolize: copying file `m4/ltversion.m4' [ 47s] libtoolize: copying file `m4/lt~obsolete.m4' [ 60s] autoreconf: running: /usr/bin/autoconf --force [ 63s] autoreconf: running: /usr/bin/autoheader --force [ 65s] autoreconf: running: automake --add-missing --copy --force-missing [ 68s] configure.ac:31: installing 'config/ar-lib' [ 68s] configure.ac:28: installing 'config/config.guess' [ 68s] configure.ac:28: installing 'config/config.sub' [ 68s] configure.ac:10: installing 'config/install-sh' [ 68s] configure.ac:10: installing 'config/missing' [ 73s] src/Makefile.am: installing 'config/depcomp' [ 73s] src/libkeymap/Makefile.am:68: warning: '%'-style pattern rules are a GNU make extension [ 74s] tests/Makefile.am:50: warning: '%'-style pattern rules are a GNU make extension [ 75s] parallel-tests: installing 'config/test-driver' [ 75s] autoreconf: Leaving directory `.' [ 75s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --datadir=/usr/lib/kbd --mandir=/usr/share/man --localedir=/usr/share/locale --disable-nls [ 75s] checking for a BSD-compatible install... /bin/install -c [ 75s] checking whether build environment is sane... yes [ 75s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 75s] checking for gawk... gawk [ 75s] checking whether make sets $(MAKE)... yes [ 75s] checking whether make supports nested variables... yes [ 75s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 75s] checking pkg-config is at least version 0.9.0... yes [ 75s] checking for CHECK... yes [ 75s] checking whether make supports nested variables... (cached) yes [ 75s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 75s] checking whether the C compiler works... yes [ 75s] checking for C compiler default output file name... a.out [ 75s] checking for suffix of executables... [ 76s] checking whether we are cross compiling... no [ 76s] checking for suffix of object files... o [ 76s] checking whether we are using the GNU C compiler... yes [ 76s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 76s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 76s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 76s] checking for style of include used by make... GNU [ 76s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 76s] checking for bison... bison -y [ 76s] checking for flex... flex [ 76s] checking lex output file root... lex.yy [ 76s] checking lex library... -lfl [ 77s] checking whether yytext is a pointer... yes [ 77s] checking for a sed that does not truncate output... /bin/sed [ 77s] checking whether ln -s works... yes [ 77s] checking whether make sets $(MAKE)... (cached) yes [ 77s] checking build system type... armv7l-tizen-linux-gnueabi [ 77s] checking host system type... armv7l-tizen-linux-gnueabi [ 77s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 77s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 77s] checking for armv7l-tizen-linux-gnueabi-link... no [ 77s] checking for ar... ar [ 77s] checking the archiver (ar) interface... ar [ 77s] checking how to print strings... printf [ 77s] checking for a sed that does not truncate output... (cached) /bin/sed [ 77s] checking for grep that handles long lines and -e... /bin/grep [ 77s] checking for egrep... /bin/grep -E [ 77s] checking for fgrep... /bin/grep -F [ 77s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 77s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 77s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 77s] checking the name lister (/bin/nm -B) interface... BSD nm [ 77s] checking the maximum length of command line arguments... 1572864 [ 77s] checking whether the shell understands some XSI constructs... yes [ 77s] checking whether the shell understands "+="... yes [ 77s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 77s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 77s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 77s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 77s] checking for objdump... objdump [ 77s] checking how to recognize dependent libraries... pass_all [ 77s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 77s] checking for dlltool... no [ 77s] checking how to associate runtime and link libraries... printf %s\n [ 77s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 77s] checking for archiver @FILE support... @ [ 77s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 77s] checking for strip... strip [ 77s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 77s] checking for ranlib... ranlib [ 77s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 77s] checking for sysroot... no [ 77s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 77s] checking for mt... no [ 77s] checking if : is a manifest tool... no [ 77s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 77s] checking for ANSI C header files... yes [ 77s] checking for sys/types.h... yes [ 77s] checking for sys/stat.h... yes [ 77s] checking for stdlib.h... yes [ 77s] checking for string.h... yes [ 77s] checking for memory.h... yes [ 77s] checking for strings.h... yes [ 77s] checking for inttypes.h... yes [ 77s] checking for stdint.h... yes [ 77s] checking for unistd.h... yes [ 77s] checking for dlfcn.h... yes [ 77s] checking for objdir... .libs [ 77s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 77s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 77s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 77s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 78s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 78s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 78s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 78s] checking whether -lc should be explicitly linked in... no [ 78s] checking dynamic linker characteristics... GNU/Linux ld.so [ 78s] checking how to hardcode library paths into programs... immediate [ 78s] checking whether stripping libraries is possible... yes [ 78s] checking if libtool supports shared libraries... yes [ 78s] checking whether to build shared libraries... yes [ 78s] checking whether to build static libraries... yes [ 78s] checking whether NLS is requested... no [ 78s] checking for msgfmt... /bin/msgfmt [ 78s] checking for gmsgfmt... /bin/msgfmt [ 78s] checking for xgettext... /bin/xgettext [ 78s] checking for msgmerge... /bin/msgmerge [ 78s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 78s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 78s] checking for shared library run path origin... done [ 78s] checking whether NLS is requested... no [ 78s] checking whether to use NLS... no [ 78s] checking for dirent.h that defines DIR... yes [ 78s] checking for library containing opendir... none required [ 78s] checking for ANSI C header files... (cached) yes [ 78s] checking for sys/wait.h that is POSIX.1 compatible... yes [ 78s] checking fcntl.h usability... yes [ 78s] checking fcntl.h presence... yes [ 78s] checking for fcntl.h... yes [ 78s] checking libintl.h usability... yes [ 78s] checking libintl.h presence... yes [ 78s] checking for libintl.h... yes [ 78s] checking locale.h usability... yes [ 78s] checking locale.h presence... yes [ 78s] checking for locale.h... yes [ 78s] checking for memory.h... (cached) yes [ 78s] checking for stdlib.h... (cached) yes [ 78s] checking for string.h... (cached) yes [ 78s] checking sys/file.h usability... yes [ 78s] checking sys/file.h presence... yes [ 78s] checking for sys/file.h... yes [ 78s] checking sys/ioctl.h usability... yes [ 78s] checking sys/ioctl.h presence... yes [ 78s] checking for sys/ioctl.h... yes [ 78s] checking termios.h usability... yes [ 78s] checking termios.h presence... yes [ 78s] checking for termios.h... yes [ 78s] checking for unistd.h... (cached) yes [ 78s] checking for an ANSI C-conforming const... yes [ 78s] checking for inline... inline [ 78s] checking for size_t... yes [ 78s] checking whether struct tm is in sys/time.h or time.h... time.h [ 78s] checking for uid_t in sys/types.h... yes [ 78s] checking for unistd.h... (cached) yes [ 78s] checking for working chown... yes [ 79s] checking whether closedir returns void... no [ 79s] checking for pid_t... yes [ 79s] checking vfork.h usability... no [ 79s] checking vfork.h presence... no [ 79s] checking for vfork.h... no [ 79s] checking for fork... yes [ 79s] checking for vfork... yes [ 79s] checking for working fork... yes [ 79s] checking for working vfork... (cached) yes [ 79s] checking whether armv7l-tizen-linux-gnueabi-gcc needs -traditional... no [ 79s] checking return type of signal handlers... void [ 79s] checking whether lstat correctly handles trailing slash... yes [ 79s] checking whether stat accepts an empty string... no [ 79s] checking for alarm... yes [ 79s] checking for memset... yes [ 79s] checking for setlocale... yes [ 79s] checking for strcasecmp... yes [ 79s] checking for strchr... yes [ 79s] checking for strdup... yes [ 79s] checking for strerror... yes [ 79s] checking for strspn... yes [ 79s] checking for strstr... yes [ 79s] checking for strtol... yes [ 80s] checking for strtoul... yes [ 80s] checking for setpgrp... yes [ 80s] checking for malloc... yes [ 80s] checking for realloc... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wextra flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdisabled-optimization flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wcast-align flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes flag... yes [ 80s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations flag... yes [ 80s] checking for pam_start in -lpam... yes [ 80s] checking security/pam_appl.h usability... yes [ 80s] checking security/pam_appl.h presence... yes [ 80s] checking for security/pam_appl.h... yes [ 80s] checking for misc_conv in -lpam_misc... yes [ 80s] checking security/pam_misc.h usability... yes [ 80s] checking security/pam_misc.h presence... yes [ 80s] checking for security/pam_misc.h... yes [ 80s] checking for doxygen... no [ 80s] checking that generated files are newer than configure... done [ 80s] configure: creating ./config.status [ 81s] config.status: creating Makefile [ 81s] config.status: creating data/Makefile [ 81s] config.status: creating docs/Makefile [ 81s] config.status: creating docs/man/Makefile [ 81s] config.status: creating docs/man/man1/Makefile [ 81s] config.status: creating docs/man/man1/dumpkeys.1 [ 81s] config.status: creating docs/man/man1/loadkeys.1 [ 81s] config.status: creating docs/man/man1misc/Makefile [ 81s] config.status: creating docs/man/man5/Makefile [ 81s] config.status: creating docs/man/man8/Makefile [ 81s] config.status: creating docs/man/man8/loadunimap.8 [ 81s] config.status: creating docs/man/man8/mapscrn.8 [ 81s] config.status: creating docs/man/man8/setfont.8 [ 81s] config.status: creating docs/man/man8misc/Makefile [ 81s] config.status: creating docs/reference/Makefile [ 81s] config.status: creating docs/reference/libkeymap/Makefile [ 81s] config.status: creating po/Makefile.in [ 81s] config.status: WARNING: 'po/Makefile.in.in' seems to ignore the --datarootdir setting [ 81s] config.status: creating src/Makefile [ 81s] config.status: creating src/libkeymap/Makefile [ 81s] config.status: creating src/vlock/Makefile [ 81s] config.status: creating tests/Makefile [ 81s] config.status: creating config.h [ 81s] config.status: executing depfiles commands [ 83s] config.status: executing libtool commands [ 83s] config.status: executing default-1 commands [ 83s] config.status: creating po/POTFILES [ 83s] config.status: creating po/Makefile [ 83s] [ 83s] kbd 2.0.2 [ 83s] ====== [ 83s] [ 83s] prefix: /usr [ 83s] libdir: /usr/lib [ 83s] bindir: /usr/bin [ 83s] datadir: /usr/lib/kbd [ 83s] [ 83s] compiler: armv7l-tizen-linux-gnueabi-gcc [ 83s] cflags: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -Wextra -Wmissing-noreturn -Wdisabled-optimization -Wcast-align -Wshadow -Wmissing-format-attribute -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations [ 83s] [ 83s] {get,set}keycodes: yes [ 83s] resizecons: no [ 83s] optional progs: no [ 83s] vlock: yes [ 83s] libkeymap: no [ 83s] [ 83s] + /bin/make -j8 [ 83s] /bin/make all-recursive [ 83s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 83s] Making all in src [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 83s] Making all in vlock [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/vlock' [ 83s] CC auth.o [ 83s] CC pam.o [ 83s] CC parse.o [ 83s] CC screen.o [ 83s] CC username.o [ 83s] CC vlock.o [ 83s] CC vt.o [ 83s] CCLD vlock [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/vlock' [ 83s] Making all in libkeymap [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 83s] YACC parser.c [ 83s] LEX analyze.c [ 83s] conflicts: 1 reduce/reduce [ 83s] updating parser.h [ 83s] /bin/make all-am [ 83s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 83s] CC array.lo [ 83s] CC findfile.lo [ 83s] CC common.lo [ 83s] CC kernel.lo [ 83s] CC dump.lo [ 83s] CC kmap.lo [ 83s] CC diacr.lo [ 83s] CC func.lo [ 83s] common.c: In function 'lk_init': [ 83s] common.c:152:21: warning: argument 2 of 'lk_set_log_fn' might be a candidate for a format attribute [-Wsuggest-attribute=format] [ 83s] lk_set_log_fn(ctx, log_file, stderr); [ 83s] ^~~~~~~~ [ 83s] CC summary.lo [ 83s] CC loadkeys.lo [ 83s] CC parser.lo [ 83s] CC analyze.lo [ 83s] CC modifiers.lo [ 84s] CC ksyms.lo [ 84s] analyze.c: In function 'yy_scan_bytes': [ 84s] analyze.c:2466:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] [ 84s] for ( i = 0; i < _yybytes_len; ++i ) [ 84s] ^ [ 84s] analyze.c: In function 'yy_fatal_error': [ 84s] analyze.c:2521:58: warning: unused parameter 'yyscanner' [-Wunused-parameter] [ 84s] static void yy_fatal_error (yyconst char* msg , yyscan_t yyscanner) [ 84s] ^~~~~~~~~ [ 84s] analyze.c: In function 'yyalloc': [ 84s] analyze.c:2853:43: warning: unused parameter 'yyscanner' [-Wunused-parameter] [ 84s] void *yyalloc (yy_size_t size , yyscan_t yyscanner) [ 84s] ^~~~~~~~~ [ 84s] analyze.c: In function 'yyrealloc': [ 84s] analyze.c:2858:58: warning: unused parameter 'yyscanner' [-Wunused-parameter] [ 84s] void *yyrealloc (void * ptr, yy_size_t size , yyscan_t yyscanner) [ 84s] ^~~~~~~~~ [ 84s] analyze.c: In function 'yyfree': [ 84s] analyze.c:2870:36: warning: unused parameter 'yyscanner' [-Wunused-parameter] [ 84s] void yyfree (void * ptr , yyscan_t yyscanner) [ 84s] ^~~~~~~~~ [ 84s] CCLD libkeymap.la [ 84s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 84s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 84s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 84s] CC getfd.o [ 84s] CC xmalloc.o [ 84s] CC psffontop.o [ 84s] CC utf8.o [ 84s] CC kdmapop.o [ 84s] CC loadunimap.o [ 84s] CC kdfontop.o [ 84s] CC mapscrn-mapscrn.o [ 84s] CC loadunimap-loadunimap.o [ 84s] CC dumpkeys.o [ 84s] CC loadkeys.o [ 84s] CC showkey.o [ 85s] CC setfont.o [ 85s] CC mapscrn.o [ 85s] CC showconsolefont.o [ 85s] CC setleds.o [ 85s] CC setmetamode.o [ 85s] CC kbd_mode.o [ 85s] CC psfxtable.o [ 85s] CC fgconsole.o [ 85s] CC kbdrate.o [ 85s] CC chvt.o [ 85s] CC deallocvt.o [ 85s] CC openvt.o [ 85s] CC kbdinfo.o [ 85s] CC setvtrgb.o [ 85s] CC getkeycodes.o [ 85s] openvt.c: In function 'main': [ 85s] openvt.c:234:5: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 85s] (void)setuid(getuid()); [ 85s] ^~~~~~~~~~~~~~~~~~~~~~ [ 85s] openvt.c:376:4: warning: ignoring return value of 'setuid', declared with attribute warn_unused_result [-Wunused-result] [ 85s] setuid(uid); [ 85s] ^~~~~~~~~~~ [ 85s] CC setkeycodes.o [ 85s] AR libcommon.a [ 85s] AR libfont.a [ 85s] CCLD mapscrn [ 85s] CCLD loadunimap [ 85s] CCLD dumpkeys [ 85s] CCLD loadkeys [ 85s] CCLD showkey [ 85s] CCLD showconsolefont [ 85s] CCLD setleds [ 85s] CCLD setmetamode [ 85s] CCLD kbd_mode [ 85s] CCLD psfxtable [ 85s] CCLD fgconsole [ 85s] CCLD kbdrate [ 85s] CCLD chvt [ 85s] CCLD deallocvt [ 85s] CCLD openvt [ 85s] CCLD kbdinfo [ 85s] CCLD setvtrgb [ 85s] CCLD getkeycodes [ 85s] CCLD setkeycodes [ 85s] CCLD setfont [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 85s] Making all in data [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 85s] make[2]: Nothing to be done for 'all'. [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 85s] Making all in po [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/po' [ 85s] make[2]: Nothing to be done for 'all'. [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/po' [ 85s] Making all in tests [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/tests' [ 85s] CC libkeymap-dumpkeys.o [ 85s] CC libkeymap-mktable.o [ 85s] CC libkeymap-bkeymap.o [ 85s] CC libkeymap-showmaps.o [ 85s] CC libkeymap-init.o [ 85s] CC libkeymap-kmap.o [ 85s] CC libkeymap-keys.o [ 85s] CC libkeymap-parse.o [ 85s] libkeymap-showmaps.c: In function 'main': [ 85s] libkeymap-showmaps.c:22:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] [ 85s] for (i = 0; i < ctx->keymap->total; i++) { [ 85s] ^ [ 85s] libkeymap-showmaps.c:8:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 85s] int main(int argc, char **argv) [ 85s] ^~~~ [ 85s] libkeymap-bkeymap.c: In function 'main': [ 85s] libkeymap-bkeymap.c:6:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 85s] int main(int argc, char **argv) [ 85s] ^~~~ [ 85s] libkeymap-mktable.c: In function 'main': [ 85s] libkeymap-mktable.c:6:14: warning: unused parameter 'argc' [-Wunused-parameter] [ 85s] int main(int argc, char **argv) [ 85s] ^~~~ [ 85s] CC libkeymap-charset.o [ 85s] CCLD libkeymap-bkeymap [ 85s] CCLD libkeymap-showmaps [ 85s] CCLD libkeymap-kmap [ 85s] CCLD libkeymap-dumpkeys [ 85s] CCLD libkeymap-mktable [ 85s] libkeymap-charset.c: In function 'test0': [ 85s] libkeymap-charset.c:22:4: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 85s] s = lk_get_charset(ctx); [ 85s] ^ [ 85s] libkeymap-charset.c: In function 'test1': [ 85s] libkeymap-charset.c:45:4: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 85s] s = lk_get_charset(ctx); [ 85s] ^ [ 85s] CCLD libkeymap-init [ 85s] CCLD libkeymap-keys [ 85s] CCLD libkeymap-charset [ 85s] CCLD libkeymap-parse [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/tests' [ 85s] Making all in docs [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 85s] Making all in man [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 85s] Making all in man1 [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 85s] make[4]: Nothing to be done for 'all'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 85s] Making all in man5 [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man5' [ 85s] make[4]: Nothing to be done for 'all'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man5' [ 85s] Making all in man8 [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 85s] make[4]: Nothing to be done for 'all'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 85s] make[4]: Nothing to be done for 'all-am'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 85s] Making all in reference [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 85s] make[4]: Nothing to be done for 'all-am'. [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 85s] make[3]: Nothing to be done for 'all-am'. [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 85s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 85s] + exit 0 [ 85s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.CL3WhA [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd kbd-2.0.2 [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm [ 85s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm [ 85s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm install [ 85s] Making install in src [ 85s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 85s] Making install in vlock [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/vlock' [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/vlock' [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin' [ 85s] /bin/sh ../../libtool --mode=install /bin/install -c vlock '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin' [ 85s] libtool: install: /bin/install -c vlock /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/vlock [ 85s] make[3]: Nothing to be done for 'install-data-am'. [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/vlock' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/vlock' [ 85s] Making install in libkeymap [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 85s] /bin/make install-am [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 85s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 85s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src/libkeymap' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 85s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin' [ 85s] /bin/sh ../libtool --mode=install /bin/install -c mapscrn loadunimap dumpkeys loadkeys showkey setfont showconsolefont setleds setmetamode kbd_mode psfxtable fgconsole kbdrate chvt deallocvt openvt kbdinfo setvtrgb getkeycodes setkeycodes '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin' [ 85s] libtool: install: /bin/install -c mapscrn /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/mapscrn [ 85s] libtool: install: /bin/install -c loadunimap /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/loadunimap [ 85s] libtool: install: /bin/install -c dumpkeys /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/dumpkeys [ 86s] libtool: install: /bin/install -c loadkeys /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/loadkeys [ 86s] libtool: install: /bin/install -c showkey /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/showkey [ 86s] libtool: install: /bin/install -c setfont /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setfont [ 86s] libtool: install: /bin/install -c showconsolefont /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/showconsolefont [ 86s] libtool: install: /bin/install -c setleds /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setleds [ 86s] libtool: install: /bin/install -c setmetamode /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setmetamode [ 86s] libtool: install: /bin/install -c kbd_mode /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/kbd_mode [ 86s] libtool: install: /bin/install -c psfxtable /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/psfxtable [ 86s] libtool: install: /bin/install -c fgconsole /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/fgconsole [ 86s] libtool: install: /bin/install -c kbdrate /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/kbdrate [ 86s] libtool: install: /bin/install -c chvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/chvt [ 86s] libtool: install: /bin/install -c deallocvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/deallocvt [ 86s] libtool: install: /bin/install -c openvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/openvt [ 86s] libtool: install: /bin/install -c kbdinfo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/kbdinfo [ 86s] libtool: install: /bin/install -c setvtrgb /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setvtrgb [ 86s] libtool: install: /bin/install -c getkeycodes /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/getkeycodes [ 86s] libtool: install: /bin/install -c setkeycodes /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setkeycodes [ 86s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin' [ 86s] /bin/install -c unicode_start unicode_stop '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin' [ 86s] /bin/make install-exec-hook [ 86s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 86s] for i in psfaddtable psfgettable psfstriptable; do \ [ 86s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/$i; \ [ 86s] ln -s psfxtable /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/$i || exit $?; \ [ 86s] done [ 86s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 86s] make[3]: Nothing to be done for 'install-data-am'. [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 86s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/src' [ 86s] Making install in data [ 86s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 86s] make[2]: Nothing to be done for 'install-exec-am'. [ 86s] /bin/make install-data-hook [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 86s] cp -r ./keymaps keymaps_Z [ 86s] chmod -R u+w keymaps_Z [ 86s] cd keymaps_Z && gzip -f -n -9 */*.map */*/*.map [ 86s] cp -r ./consolefonts consolefonts_Z [ 86s] cp -r ./partialfonts partialfonts_Z [ 86s] chmod -R u+w consolefonts_Z partialfonts_Z [ 86s] cd consolefonts_Z && gzip -f -n -9 * && gunzip ERRORS* README* [ 86s] cd partialfonts_Z && gzip -f -n -9 * [ 86s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd [ 86s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts [ 86s] install -m 644 consolefonts_Z/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts [ 87s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/partialfonts [ 87s] install -m 644 partialfonts_Z/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/partialfonts [ 87s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consoletrans [ 87s] install -m 644 ./consoletrans/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consoletrans [ 87s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/unimaps [ 87s] install -m 644 ./unimaps/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/unimaps [ 87s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps [ 87s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386 [ 87s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/mac [ 87s] for i in include sun amiga atari i386/azerty i386/bepo i386/dvorak i386/fgGIod i386/qwerty i386/qwertz i386/include i386/olpc i386/colemak mac/include mac/all; do \ [ 87s] install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/$i ;\ [ 87s] install -m 644 keymaps_Z/$i/* /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/$i ;\ [ 87s] done [ 87s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/ppc; ln -s mac /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/ppc [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/data' [ 87s] Making install in po [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/po' [ 87s] if test "kbd" = "gettext-tools"; then \ [ 87s] /bin/sh ../config/mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/gettext/po; \ [ 87s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 87s] /bin/install -c -m 644 ./$file \ [ 87s] /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/gettext/po/$file; \ [ 87s] done; \ [ 87s] for file in Makevars; do \ [ 87s] rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/gettext/po/$file; \ [ 87s] done; \ [ 87s] else \ [ 87s] : ; \ [ 87s] fi [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/po' [ 87s] Making install in tests [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/tests' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/tests' [ 87s] make[2]: Nothing to be done for 'install-exec-am'. [ 87s] make[2]: Nothing to be done for 'install-data-am'. [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/tests' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/tests' [ 87s] Making install in docs [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 87s] Making install in man [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 87s] Making install in man1 [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 87s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 87s] make[4]: Nothing to be done for 'install-exec-am'. [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man1' [ 87s] /bin/install -c -m 644 chvt.1 deallocvt.1 fgconsole.1 kbd_mode.1 openvt.1 psfaddtable.1 psfgettable.1 psfstriptable.1 psfxtable.1 setleds.1 setmetamode.1 showkey.1 unicode_start.1 unicode_stop.1 dumpkeys.1 loadkeys.1 vlock.1 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man1' [ 87s] /bin/make install-data-hook [ 87s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 87s] cd /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man1 && \ [ 87s] for f in dumpkeys.1 loadkeys.1; do \ [ 87s] /bin/sed -e "s#@DATADIR\@#/usr/lib/kbd#g" "$f" > "$f.new"; \ [ 87s] mv -f -- "$f.new" "$f"; \ [ 87s] done [ 87s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 87s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man1' [ 87s] Making install in man5 [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man5' [ 87s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man5' [ 87s] make[4]: Nothing to be done for 'install-exec-am'. [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man5' [ 87s] /bin/install -c -m 644 keymaps.5 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man5' [ 87s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man5' [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man5' [ 87s] Making install in man8 [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 87s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 87s] make[4]: Nothing to be done for 'install-exec-am'. [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man8' [ 87s] /bin/install -c -m 644 getkeycodes.8 kbdrate.8 resizecons.8 setkeycodes.8 showconsolefont.8 setvtrgb.8 loadunimap.8 mapscrn.8 setfont.8 '/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man8' [ 87s] /bin/make install-data-hook [ 87s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 87s] cd /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/man/man8 && \ [ 87s] for f in loadunimap.8 mapscrn.8 setfont.8; do \ [ 87s] /bin/sed -e "s#@DATADIR\@#/usr/lib/kbd#g" "$f" > "$f.new"; \ [ 87s] mv -f -- "$f.new" "$f"; \ [ 87s] done [ 87s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 87s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man/man8' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 87s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 87s] make[4]: Nothing to be done for 'install-exec-am'. [ 87s] make[4]: Nothing to be done for 'install-data-am'. [ 87s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/man' [ 87s] Making install in reference [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 87s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 87s] make[4]: Nothing to be done for 'install-exec-am'. [ 87s] make[4]: Nothing to be done for 'install-data-am'. [ 87s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs/reference' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 87s] make[3]: Nothing to be done for 'install-exec-am'. [ 87s] make[3]: Nothing to be done for 'install-data-am'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2/docs' [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 87s] make[2]: Nothing to be done for 'install-exec-am'. [ 87s] make[2]: Nothing to be done for 'install-data-am'. [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/kbd-2.0.2' [ 87s] + rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/info/dir [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm -regex '.*\.la$' [ 87s] + xargs rm -f -- [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm -regex '.*\.a$' [ 87s] + xargs rm -f -- [ 87s] + rm -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm//usr/lib/kbd/keymaps/i386/qwerty/ro_win.map.gz [ 87s] + ln -sf sr-cy.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm//usr/lib/kbd/keymaps/i386/qwerty/sr-latin.map.gz [ 87s] + ln -sf us.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm//usr/lib/kbd/keymaps/i386/qwerty/ko.map.gz [ 87s] + sed -i -e 's,\,/usr/bin/kbd_mode,g;s,\,/usr/bin/setfont,g' /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm//usr/bin/unicode_start [ 87s] + ln -sf openvt /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/open [ 87s] + _target= [ 87s] + _symlinks=0 [ 87s] + _files=() [ 87s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd [ 87s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z [ 88s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 88s] ++ sort [ 88s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz [ 88s] ++ seq 1 1 [ 88s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 88s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 88s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 88s] + test 0 = 1 [ 88s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/dvorak-ca-fr.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/dvorak/fr-dvorak.map.gz [ 88s] + _files=() [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z [ 88s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 88s] ++ sort [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 88s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz [ 88s] ++ seq 1 2 [ 88s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 88s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 88s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 88s] + test 0 = 1 [ 88s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin9.map.gz [ 88s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 88s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 88s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 88s] + test 0 = 1 [ 88s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr-latin0.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/azerty/fr.map.gz [ 88s] + _files=() [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z [ 88s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 88s] ++ sort [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 88s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz [ 88s] ++ seq 1 1 [ 88s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 88s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 88s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 88s] + test 0 = 1 [ 88s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/se-latin1.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/sv-latin1.map.gz [ 88s] + _files=() [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z [ 88s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 88s] ++ sort [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 88s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz [ 88s] ++ seq 1 1 [ 88s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 88s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 88s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 88s] + test 0 = 1 [ 88s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt-latin9.map.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/keymaps/i386/qwerty/pt.map.gz [ 88s] + _files=() [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z [ 88s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 88s] ++ sort [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 88s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz [ 88s] ++ seq 1 1 [ 88s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 88s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 88s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 88s] + test 0 = 1 [ 88s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso01-12x22.psfu.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/iso02-12x22.psfu.gz [ 88s] + _files=() [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 88s] + _files+=($_file) [ 88s] + read _file [ 88s] + test -z [ 88s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 88s] ++ sort [ 88s] ++ for i in '${_files[*]}' [ 88s] ++ echo /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 88s] + _target=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz [ 88s] ++ seq 1 1 [ 88s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 88s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 88s] + rm /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 88s] + test 0 = 1 [ 88s] + ln -f /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737c-8x16.psfu.gz /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/lib/kbd/consolefonts/gr737d-8x16.psfu.gz [ 88s] + _files=() [ 88s] + read _file [ 88s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/kbd-2.0.2 [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/chvt [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/deallocvt [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/dumpkeys [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/fgconsole [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/getkeycodes [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/kbd_mode [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/kbdinfo [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/kbdrate [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/loadkeys [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/loadunimap [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/mapscrn [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/openvt [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/psfxtable [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setfont [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setkeycodes [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setleds [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setmetamode [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/setvtrgb [ 92s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/showconsolefont [ 92s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/showkey [ 92s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/bin/vlock [ 92s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 92s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 92s] 947 blocks [ 92s] + /usr/lib/rpm/check-buildroot [ 92s] + /usr/lib/rpm//brp-compress [ 92s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 94s] + /usr/lib/rpm/brp-python-hardlink [ 94s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm [ 94s] Processing files: kbd-2.0.2-2.2.armv7l [ 94s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 94s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 94s] [ 94s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.9HjYdc [ 94s] + umask 022 [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + cd kbd-2.0.2 [ 94s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/licenses/kbd [ 94s] + export LICENSEDIR [ 94s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/licenses/kbd [ 94s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm/usr/share/licenses/kbd [ 94s] + exit 0 [ 94s] Provides: kbd = 2.0.2-2.2 kbd(armv7l-32) = 2.0.2-2.2 [ 94s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 94s] Requires: /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpam.so.0 libpam.so.0(LIBPAM_1.0) libpam_misc.so.0 libpam_misc.so.0(LIBPAM_MISC_1.0) rtld(GNU_HASH) [ 94s] Processing files: kbd-debugsource-2.0.2-2.2.armv7l [ 94s] Provides: kbd-debugsource = 2.0.2-2.2 kbd-debugsource(armv7l-32) = 2.0.2-2.2 [ 94s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 94s] Processing files: kbd-misc-2.0.2-2.2.noarch [ 94s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 94s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 94s] [ 97s] Provides: kbd-misc = 2.0.2-2.2 [ 97s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 97s] Processing files: kbd-docs-2.0.2-2.2.armv7l [ 97s] Provides: kbd-docs = 2.0.2-2.2 kbd-docs(armv7l-32) = 2.0.2-2.2 [ 97s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 97s] Processing files: kbd-debuginfo-2.0.2-2.2.armv7l [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] warning: File listed twice: /usr/lib/debug/.build-id [ 97s] Provides: kbd-debuginfo = 2.0.2-2.2 kbd-debuginfo(armv7l-32) = 2.0.2-2.2 [ 97s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 97s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm [ 97s] warning: Could not canonicalize hostname: obspw16 [ 97s] Wrote: /home/abuild/rpmbuild/SRPMS/kbd-2.0.2-2.2.src.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/kbd-2.0.2-2.2.armv7l.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/kbd-debugsource-2.0.2-2.2.armv7l.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/kbd-misc-2.0.2-2.2.noarch.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/kbd-docs-2.0.2-2.2.armv7l.rpm [ 97s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/kbd-debuginfo-2.0.2-2.2.armv7l.rpm [ 97s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.FlwpVi [ 97s] + umask 022 [ 97s] + cd /home/abuild/rpmbuild/BUILD [ 97s] + cd kbd-2.0.2 [ 97s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/kbd-2.0.2-2.2.arm [ 97s] + exit 0 [ 97s] ... checking for files with abuild user/group [ 97s] ... creating baselibs [ 98s] ... comparing built packages with the former built [ 98s] /usr/lib/build/pkg-diff.sh [ 98s] compare /.build.oldpackages/kbd-2.0.2-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/kbd-2.0.2-2.2.src.rpm [ 98s] This is not a prerelease project. Compare the project name. [ 98s] comparing rpmtags [ 98s] comparing RELEASE [ 98s] comparing PROVIDES [ 98s] comparing scripts [ 98s] comparing filelist [ 98s] comparing file checksum [ 98s] RPM meta information is identical [ 99s] compare /.build.oldpackages/kbd-2.0.2-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/kbd-2.0.2-2.2.armv7l.rpm [ 99s] Comparing kbd-2.0.2-2.1.armv7l.rpm to kbd-2.0.2-2.2.armv7l.rpm [ 99s] This is not a prerelease project. Compare the project name. [ 99s] comparing rpmtags [ 99s] comparing RELEASE [ 99s] comparing PROVIDES [ 99s] comparing scripts [ 99s] comparing filelist [ 99s] comparing file checksum [ 99s] creating rename script [ 99s] RPM file checksum differs. [ 99s] Extracting packages [ 99s] /usr/bin/chvt differs in assembler output [ 99s] --- /tmp/tmp.Jpmiu51671/tmp.leNAY51770 2017-05-19 23:55:06.526527729 +0000 [ 99s] +++ /tmp/tmp.Jpmiu51671/tmp.nkMwe51772 2017-05-19 23:55:06.530527700 +0000 [ 99s] @@ -16,82 +16,82 @@ [ 99s] ldr lr, [pc, # ] ; [ 99s] add lr, pc, lr [ 99s] ldr pc, [lr, # ]! [ 99s] - andeq r1, r1, r8, lsr # [ 99s] + andeq r0, r1, r8, lsr r6 [ 99s] [ 99s] strtol@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xb28 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x638 [ 99s] [ 99s] perror@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xb20 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x630 [ 99s] [ 99s] fwrite@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xb18 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x628 [ 99s] [ 99s] ioctl@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xb10 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x620 [ 99s] [ 99s] __libc_start_main@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xb08 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x618 [ 99s] [ 99s] __gmon_start__@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xb00 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x610 [ 99s] [ 99s] open@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xaf8 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x608 [ 99s] [ 99s] exit@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xaf0 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x600 [ 99s] [ 99s] __printf_chk@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xae8 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x5f8 [ 99s] [ 99s] __fprintf_chk@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xae0 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x5f0 [ 99s] [ 99s] setlocale@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xad8 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x5e8 [ 99s] [ 99s] strrchr@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xad0 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x5e0 [ 99s] [ 99s] isatty@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xac8 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x5d8 [ 99s] [ 99s] abort@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xac0 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x5d0 [ 99s] [ 99s] close@plt: [ 99s] add ip, pc, # , 12 [ 99s] - add ip, ip, # ; 0x11000 [ 99s] - ldr pc, [ip, # ]! ; 0xab8 [ 99s] + add ip, ip, # , 20 ; 0x10000 [ 99s] + ldr pc, [ip, # ]! ; 0x5c8 [ 99s] [ 99s] Disassembly of section .text: [ 99s] [ 99s] @@ -101,16 +101,16 @@ [ 99s] strtmi r2, [r8], -pc, lsr # [ 99s] svc 0x00e0f7ff [ 99s] stfnep f3, [r5], {-0} [ 99s] - ldrbne pc, [r8], #-578 ; 0xfffffdbe ; [ 99s] + strbtmi pc, [r8], #-1600 ; 0xfffff9c0 ; [ 99s] streq pc, [r2], #-704 ; 0xfffffd40 [ 99s] - orrsvc pc, r4, r1, asr # [ 99s] + orrcs pc, r8, r0, asr # [ 99s] vaddl.s8 q9, d0, d6 [ 99s] eorvs r0, r5, r1, lsl # [ 99s] svc 0x00ccf7ff [ 99s] andle r2, pc, r2, lsl # [ 99s] - cmpne r0, # ; 0x20000004 ; [ 99s] + msrmi SPSR_, # , 12 ; 0x4000000 [ 99s] movweq pc, # ; 0x22c0 ; [ 99s] - rscvs pc, r8, r1, asr # [ 99s] + sbcsne pc, ip, r0, asr # [ 99s] ldmdavs fp, {r1, r2, r3, r9, sp} [ 99s] andeq pc, r1, r0, asr # [ 99s] ; instruction: 0xf7ff2101 [ 99s] @@ -121,8 +121,8 @@ [ 99s] bcs [ 99s] ldmvc sp, {r4, r8, ip, lr, pc} [ 99s] stmdavs r2!, {r0, r2, r4, r5, r6, r8, fp, ip, sp, pc} [ 99s] - bicsvs pc, r0, # ; 0x10000004 [ 99s] - bicsvs pc, ip, r1, asr # [ 99s] + bicne pc, r4, # , 12 ; 0x4000000 [ 99s] + bicsne pc, r0, r0, asr # [ 99s] movweq pc, # ; 0x12c0 ; [ 99s] smlabteq r1, r0, r2, pc ; [ 99s] ; instruction: 0xf7ff2001 [ 99s] @@ -140,12 +140,12 @@ [ 99s] vmax.s8 d20, d5, d16 [ 99s] ; instruction: 0xf7ff6107 [ 99s] orrlt lr, r8, r2, ror # [ 99s] - andvc pc, ip, r1, asr # [ 99s] + andcs pc, r0, r0, asr # [ 99s] andeq pc, r1, r0, asr # [ 99s] svc 0x004ef7ff [ 99s] ; instruction: 0xf7ff2001 [ 99s] - vrecps.f32 q15, , q8 [ 99s] - vshr.s64 q11, q12, # [ 99s] + ; instruction: 0xf640ef70 [ 99s] + vmla.i d17, d16, d0[7] [ 99s] ; instruction: 0xf7ff0001 [ 99s] andcs lr, r1, r6, asr # [ 99s] svc 0x0066f7ff [ 99s] @@ -172,19 +172,19 @@ [ 99s] cmp r2, # [ 99s] bxeq lr [ 99s] b <__gmon_start__@plt> [ 99s] - andeq r1, r1, ip, asr # [ 99s] + andeq r0, r1, ip, asr r4 [ 99s] andeq r0, r0, r8, asr # [ 99s] - vqdmulh.s d20, d2, d7 [ 99s] - vmov.i32 , # ; 0x00000000 [ 99s] + ; instruction: 0xf6404b07 [ 99s] + vmla.i d20, d0, d0[4] [ 99s] bne [ 99s] stmdble r5, {r1, r2, r8, r9, fp, sp} [ 99s] movweq pc, # ; 0x240 ; [ 99s] movweq pc, # ; 0x2c0 ; [ 99s] ldrmi fp, [r8, -r3, lsl # ] [ 99s] svclt 0x00004770 [ 99s] - andeq r2, r2, r3, asr r1 [ 99s] - cmpne r0, # ; 0x20000004 ; [ 99s] - subsne pc, r0, r2, asr # [ 99s] + andeq r0, r2, r3, ror # [ 99s] + msrmi SPSR_, # , 12 ; 0x4000000 [ 99s] + rsbmi pc, r0, r0, asr # [ 99s] movweq pc, # ; 0x22c0 ; [ 99s] andeq pc, r2, r0, asr # [ 99s] addne r1, r9, r9, lsl sl [ 99s] @@ -194,14 +194,14 @@ [ 99s] movweq pc, # ; 0x2c0 ; [ 99s] ldrmi fp, [r8, -r3, lsl # ] [ 99s] svclt 0x00004770 [ 99s] - vqrshl.s8 d27, d0, d2 [ 99s] - vmov.i32 , # ; 0x00040000 [ 99s] + ; instruction: 0xf640b510 [ 99s] + vmls.i d20, d0, d0[5] [ 99s] stmdavc r3!, {r1, sl} [ 99s] ; instruction: 0xf7ffb91b [ 99s] /usr/bin/chvt differs in ELF section .dynsym [ 99s] --- /tmp/tmp.Jpmiu51671/tmp.leNAY51770 2017-05-19 23:55:06.566527443 +0000 [ 99s] +++ /tmp/tmp.Jpmiu51671/tmp.nkMwe51772 2017-05-19 23:55:06.566527443 +0000 [ 99s] @@ -13,7 +13,7 @@ [ 99s] 102dc f0000000 00000000 00000000 12000000 ................ [ 99s] 102ec 96000000 00000000 00000000 12000000 ................ [ 99s] 102fc e3000000 00000000 00000000 12000000 ................ [ 99s] - 1030c d6000000 50210200 04000000 11001800 ....P!.......... [ 99s] + 1030c d6000000 600c0200 04000000 11001800 ....`........... [ 99s] 1031c f5000000 00000000 00000000 12000000 ................ [ 99s] 1032c a5000000 00000000 00000000 12000000 ................ [ 99s] 1033c b4000000 00000000 00000000 12000000 ................ [ 99s] /usr/bin/chvt differs in ELF section .rel.dyn [ 99s] --- /tmp/tmp.Jpmiu51671/tmp.leNAY51770 2017-05-19 23:55:06.590527273 +0000 [ 99s] +++ /tmp/tmp.Jpmiu51671/tmp.nkMwe51772 2017-05-19 23:55:06.594527244 +0000 [ 99s] @@ -2,4 +2,4 @@ [ 99s] /usr/bin/chvt: file format elf32-littlearm [ 99s] [ 99s] Contents of section .rel.dyn: [ 99s] - 10530 44210200 15030000 50210200 140b0000 D!......P!...... [ 99s] + 10530 540c0200 15030000 600c0200 140b0000 T.......`....... [ 99s] /usr/bin/chvt differs in ELF section .rel.plt [ 99s] --- /tmp/tmp.Jpmiu51671/tmp.leNAY51770 2017-05-19 23:55:06.594527244 +0000 [ 99s] +++ /tmp/tmp.Jpmiu51671/tmp.nkMwe51772 2017-05-19 23:55:06.598527216 +0000 [ 99s] @@ -2,11 +2,11 @@ [ 99s] /usr/bin/chvt: file format elf32-littlearm [ 99s] [ 99s] Contents of section .rel.plt: [ 99s] - 10540 08210200 16130000 0c210200 16100000 .!.......!...... [ 99s] - 10550 10210200 160a0000 14210200 16060000 .!.......!...... [ 99s] - 10560 18210200 160c0000 1c210200 16030000 .!.......!...... [ 99s] - 10570 20210200 16080000 24210200 16090000 !......$!...... [ 99s] - 10580 28210200 16070000 2c210200 16140000 (!......,!...... [ 99s] - 10590 30210200 16120000 34210200 160d0000 0!......4!...... [ 99s] - 105a0 38210200 160f0000 3c210200 160e0000 8!......