[ 0s] Memory limit set to 87947400KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obspw27 started "build _service:gbs:sensor-hal-tm2.spec" at Sat May 20 00:53:19 UTC 2017. [ 1s] [ 1s] Building sensor-hal-tm2 for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '20e3a2d7c8d285e4f169ee9873f8c998' [ 1s] [ 1s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:sensor-hal-tm2.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:sensor-hal-tm2.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:sensor-hal-tm2.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libbz2... [ 2s] [11/40] preinstalling libcap... [ 2s] [12/40] preinstalling libelf... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling liblua... [ 2s] [15/40] preinstalling liblzma... [ 2s] [16/40] preinstalling libncurses... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libsmack... [ 2s] [19/40] preinstalling libsqlite... [ 2s] [20/40] preinstalling libuuid... [ 2s] [21/40] preinstalling nspr... [ 2s] [22/40] preinstalling sed... [ 2s] [23/40] preinstalling zlib... [ 2s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [26/40] preinstalling coreutils... [ 7s] [27/40] preinstalling libacl... [ 7s] [28/40] preinstalling libblkid... [ 7s] [29/40] preinstalling libreadline... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 7s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/6.2.1/liblto_plugin.so': No such file or directory [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/102] installing libmagic-data-5.28-4.11 [ 8s] [2/102] installing sensor-hal-devel-4.0.0-9.1 [ 8s] [3/102] installing setup-0.9-3.20 [ 8s] [4/102] installing terminfo-base-5.9-3.40 [ 8s] [5/102] installing filesystem-3.1-3.2 [ 8s] [6/102] installing glibc-2.24-3.20 [ 8s] [7/102] installing libatomic-6.2.1-6.2 [ 9s] [8/102] installing libgcc-6.2.1-6.2 [ 9s] [9/102] installing bash-3.2.57-4.2 [ 9s] [10/102] installing binutils-2.27-4.28 [ 9s] [11/102] installing capi-base-common-0.4.13-3.2 [ 9s] [12/102] installing cpio-2.11-3.4 [ 9s] [13/102] installing diffutils-3.3-3.2 [ 9s] [14/102] installing findutils-4.3.8-3.45 [ 9s] [15/102] installing hostname-3.12-4.2 [ 9s] [16/102] installing libattr-2.4.47-3.42 [ 9s] [17/102] installing libbz2-1.0.6-4.41 [ 9s] [18/102] installing libcap-2.24-3.39 [ 9s] [19/102] installing libelf-0.153-3.18 [ 9s] [20/102] installing libexpat-2.2.0-3.44 [ 9s] [21/102] installing libext2fs-1.42.13-3.4 [ 9s] [22/102] installing libfreebl3-3.23-3.37 [ 9s] [23/102] installing libgfortran-6.2.1-6.2 [ 10s] [24/102] installing libgomp-6.2.1-6.2 [ 10s] [25/102] installing libitm-6.2.1-6.2 [ 10s] [26/102] installing libltdl-2.4.2-4.35 [ 10s] [27/102] installing liblua-5.1.4-3.7 [ 10s] [28/102] installing liblzma-5.2.2-3.41 [ 10s] [29/102] installing libpcre-8.39-3.5 [ 10s] [30/102] installing libpopt-1.16-4.8 [ 10s] [31/102] installing libsmack-1.3.0-3.40 [ 10s] [32/102] installing libsmartcols-2.28-3.2 [ 10s] [33/102] installing libsqlite-3.18.0-5.3 [ 10s] [34/102] installing libstdc++-6.2.1-6.2 [ 10s] [35/102] installing libuuid-2.28-3.2 [ 10s] [36/102] installing m4-1.4.17-3.2 [ 10s] [37/102] installing net-tools-2.0_20121208git-3.2 [ 10s] [38/102] installing nspr-4.12-3.8 [ 10s] [39/102] installing patch-2.7-3.8 [ 10s] [40/102] installing pkg-config-0.28-4.43 [ 10s] [41/102] installing sed-4.1c-3.2 [ 10s] [42/102] installing update-alternatives-1.18.15-3.2 [ 10s] [43/102] installing which-2.20-6.2 [ 10s] [44/102] installing zlib-1.2.8-3.45 [ 10s] [45/102] installing libncurses-5.9-3.40 [ 10s] [46/102] installing build-compare-2015.04.28-3.26 [ 11s] [47/102] installing libstdc++-devel-6.2.1-6.2 [ 11s] [48/102] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 12s] [49/102] installing capi-base-common-devel-0.4.13-3.2 [ 12s] [50/102] installing cpp-6.2.1-6.2 [ 13s] [51/102] installing gcc-c++-6.2.1-6.2 [ 13s] [52/102] installing coreutils-6.9-3.2 [ 13s] [53/102] installing db4-4.8.30.NC-3.47 [ 13s] [54/102] installing gawk-3.1.5-3.2 [ 13s] [55/102] installing grep-2.5.2-3.2 [ 13s] [56/102] installing less-466-8.2 [ 13s] [57/102] installing libacl-2.2.52-3.46 [ 13s] [58/102] installing libasm-0.153-3.18 [ 13s] [59/102] installing libblkid-2.28-3.2 [ 14s] [60/102] installing libcc1-6.2.1-6.2 [ 14s] [61/102] installing libopenssl-1.0.2j-3.40 [ 14s] [62/102] installing libreadline-5.2-3.39 [ 14s] [63/102] installing libubsan-6.2.1-6.2 [ 14s] [64/102] installing make-4.0-3.7 [ 14s] [65/102] installing nss-certs-3.23-3.37 [ 14s] [66/102] installing procps-ng-3.3.9-3.3 [ 14s] [67/102] installing smack-1.3.0-3.40 [ 14s] [68/102] installing bzip2-1.0.6-4.41 [ 14s] [69/102] installing libmagic-5.28-4.11 [ 14s] [70/102] installing libxml2-2.9.4-4.39 [ 14s] [71/102] installing xz-5.2.2-3.41 [ 14s] [72/102] installing libdw-0.153-3.18 [ 14s] [73/102] installing linux-glibc-devel-3.10-3.45 [ 14s] [74/102] installing file-5.28-4.11 [ 14s] [75/102] installing glibc-locale-2.24-3.20 [ 15s] [76/102] installing libmount-2.28-3.2 [ 15s] [77/102] installing tar-1.17-3.2 [ 15s] [78/102] installing gzip-1.3.12-3.39 [ 15s] [79/102] installing libfdisk1-2.28-3.2 [ 15s] [80/102] installing pam-1.1.6-3.3 [ 15s] [81/102] installing perl-5.20.0-4.13 [ 16s] [82/102] installing tzdata-2016i-4.2 [ 16s] [83/102] installing elfutils-0.153-3.18 [ 16s] [84/102] installing gcc-6.2.1-6.2 [ 17s] [85/102] installing libarchive-3.1.2-3.2 [ 17s] [86/102] installing build-mkbaselibs-20120927-3.1 [ 17s] [87/102] installing glibc-devel-2.24-3.20 [ 17s] [88/102] installing qemu-accel-x86_64-armv7l-0.4-3.15 [ 22s] warning: %post(qemu-accel-x86_64-armv7l-0.4-3.15.armv7l) scriptlet failed, exit status 1 [ 22s] [89/102] installing autoconf-2.69-3.48 [ 22s] [90/102] installing libsystemd-231-4.3 [ 23s] [91/102] installing cmake-2.8.12.2-4.2 [ 23s] [92/102] installing util-linux-2.28-3.2 [ 23s] [93/102] installing automake-1.14.1-3.32 [ 23s] [94/102] installing util-linux-su-2.28-3.2 [ 23s] [95/102] installing build-20120927-3.1 [ 23s] [96/102] installing libdlog-0.6-2.2 [ 23s] [97/102] installing libdlog-devel-0.6-2.2 [ 23s] [98/102] installing libtool-2.4.2-4.35 [ 23s] [99/102] installing nss-3.23-3.37 [ 24s] [100/102] installing libsoftokn3-3.23-3.37 [ 24s] [101/102] installing rpm-4.11.0.1-4.22 [ 24s] [102/102] installing rpm-build-4.11.0.1-4.22 [ 24s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 24s] now finalizing build dir... [ 24s] build target is armv7l-tizen-linux [ 24s] ----------------------------------------------------------------- [ 24s] I have the following modifications for sensor-hal-tm2.spec: [ 24s] 5c5 [ 24s] < Release: 0 [ 24s] --- [ 24s] > Release: 4.1 [ 24s] ----------------------------------------------------------------- [ 24s] ----- building sensor-hal-tm2.spec (user abuild) [ 24s] ----------------------------------------------------------------- [ 24s] ----------------------------------------------------------------- [ 25s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/20e3a2d7c8d285e4f169ee9873f8c998-sensor-hal-tm2' -ba /home/abuild/rpmbuild/SOURCES/sensor-hal-tm2.spec [ 25s] Building target platforms: armv7l-tizen-linux [ 25s] Building for target armv7l-tizen-linux [ 25s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.CBKVDD [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + rm -rf sensor-hal-tm2-1.0.3 [ 25s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/sensor-hal-tm2-1.0.3.tar.gz [ 25s] + /bin/tar -xf - [ 25s] + STATUS=0 [ 25s] + '[' 0 -ne 0 ']' [ 25s] + cd sensor-hal-tm2-1.0.3 [ 25s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 25s] + exit 0 [ 25s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.yiRLwY [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd sensor-hal-tm2-1.0.3 [ 25s] ++ uname -m [ 25s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 25s] + LANG=C [ 25s] + export LANG [ 25s] + unset DISPLAY [ 25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 25s] + export CFLAGS [ 25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 25s] + export CXXFLAGS [ 25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 25s] + export FFLAGS [ 25s] + LDFLAGS= [ 25s] + export LDFLAGS [ 25s] + LD_AS_NEEDED=1 [ 25s] + export LD_AS_NEEDED [ 25s] + export 'CXXFLAGS+= -Wextra -Wcast-align -Wcast-qual -Wshadow -Wwrite-strings -Wswitch-default' [ 25s] + CXXFLAGS+=' -Wextra -Wcast-align -Wcast-qual -Wshadow -Wwrite-strings -Wswitch-default' [ 25s] + export 'CXXFLAGS+= -Wnon-virtual-dtor -Wno-c++0x-compat -Wno-unused-parameter -Wno-empty-body' [ 25s] + CXXFLAGS+=' -Wnon-virtual-dtor -Wno-c++0x-compat -Wno-unused-parameter -Wno-empty-body' [ 25s] + export 'CXXFLAGS+= -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-strict-aliasing' [ 25s] + CXXFLAGS+=' -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-strict-aliasing' [ 25s] + export 'CXXFLAGS+= -fno-unroll-loops -fsigned-char -fstrict-overflow' [ 25s] + CXXFLAGS+=' -fno-unroll-loops -fsigned-char -fstrict-overflow' [ 25s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr [ 25s] -- The CXX compiler identification is GNU 6.2.1 [ 25s] -- Check for working CXX compiler: /bin/c++ [ 25s] -- Check for working CXX compiler: /bin/c++ -- works [ 25s] -- Detecting CXX compiler ABI info [ 25s] -- Detecting CXX compiler ABI info - done [ 25s] FLAGS: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -Wextra -Wcast-align -Wcast-qual -Wshadow -Wwrite-strings -Wswitch-default -Wnon-virtual-dtor -Wno-c++0x-compat -Wno-unused-parameter -Wno-empty-body -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-strict-aliasing -fno-unroll-loops -fsigned-char -fstrict-overflow -Wall -O2 -omit-frame-pointer -std=gnu++0x -fdata-sections -ffunction-sections [ 25s] FLAGS: -Wl,--gc-section -Wl,--print-gc-section [ 25s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 25s] -- checking for module 'dlog' [ 25s] -- found dlog, version 1.0 [ 26s] Sources: /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/create.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/accel/accel_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/gyro/gyro_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/proxi/proxi_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/light/light_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/geomag/geomag_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/pressure/pressure_device.cpp;/home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/ultraviolet/uv_device.cpp [ 26s] -- Configuring done [ 26s] -- Generating done [ 26s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3 [ 26s] + make -j8 [ 26s] Scanning dependencies of target sensor-hal-tm2 [ 26s] [ 11%] [ 22%] [ 33%] [ 44%] [ 55%] [ 66%] [ 77%] [ 88%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/util.cpp.o [ 26s] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/create.cpp.o [ 26s] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/accel/accel_device.cpp.o [ 26s] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/gyro/gyro_device.cpp.o [ 26s] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/proxi/proxi_device.cpp.o [ 26s] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/geomag/geomag_device.cpp.o [ 26s] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/pressure/pressure_device.cpp.o [ 26s] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/light/light_device.cpp.o [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp: In function 'bool get_event_num(const string&, std::__cxx11::string&)': [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:53:11: warning: 'int readdir_r(DIR*, dirent*, dirent**)' is deprecated [-Wdeprecated-declarations] [ 26s] error = readdir_r(dir, &dir_entry, &result); [ 26s] ^~~~~~~~~ [ 26s] In file included from /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:19:0: [ 26s] /usr/include/dirent.h:183:12: note: declared here [ 26s] extern int readdir_r (DIR *__restrict __dirp, [ 26s] ^~~~~~~~~ [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:53:45: warning: 'int readdir_r(DIR*, dirent*, dirent**)' is deprecated [-Wdeprecated-declarations] [ 26s] error = readdir_r(dir, &dir_entry, &result); [ 26s] ^ [ 26s] In file included from /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:19:0: [ 26s] /usr/include/dirent.h:183:12: note: declared here [ 26s] extern int readdir_r (DIR *__restrict __dirp, [ 26s] ^~~~~~~~~ [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp: In function 'bool get_input_method(const string&, int&, std::__cxx11::string&)': [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:178:12: warning: 'int readdir_r(DIR*, dirent*, dirent**)' is deprecated [-Wdeprecated-declarations] [ 26s] error = readdir_r(dir, &dir_entry, &result); [ 26s] ^~~~~~~~~ [ 26s] In file included from /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:19:0: [ 26s] /usr/include/dirent.h:183:12: note: declared here [ 26s] extern int readdir_r (DIR *__restrict __dirp, [ 26s] ^~~~~~~~~ [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:178:46: warning: 'int readdir_r(DIR*, dirent*, dirent**)' is deprecated [-Wdeprecated-declarations] [ 26s] error = readdir_r(dir, &dir_entry, &result); [ 26s] ^ [ 26s] In file included from /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/util.cpp:19:0: [ 26s] /usr/include/dirent.h:183:12: note: declared here [ 26s] extern int readdir_r (DIR *__restrict __dirp, [ 26s] ^~~~~~~~~ [ 26s] [100%] Building CXX object CMakeFiles/sensor-hal-tm2.dir/src/ultraviolet/uv_device.cpp.o [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/ultraviolet/uv_device.cpp: In member function 'bool uv_device::update_value_input_event()': [ 26s] /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3/src/ultraviolet/uv_device.cpp:170:6: warning: variable 'hrm_temp' set but not used [-Wunused-but-set-variable] [ 26s] int hrm_temp = -1; [ 26s] ^~~~~~~~ [ 27s] Linking CXX shared library libsensor-hal-tm2.so [ 27s] [100%] Built target sensor-hal-tm2 [ 27s] + exit 0 [ 27s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.8qSfVo [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd sensor-hal-tm2-1.0.3 [ 27s] + LANG=C [ 27s] + export LANG [ 27s] + unset DISPLAY [ 27s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm [ 27s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm [ 27s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm install [ 27s] [100%] Built target sensor-hal-tm2 [ 27s] Install the project... [ 27s] -- Install configuration: "" [ 27s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/lib/sensor/libsensor-hal-tm2.so [ 27s] + rm -f /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/share/info/dir [ 27s] + find /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm -regex '.*\.la$' [ 27s] + xargs rm -f -- [ 27s] + find /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm -regex '.*\.a$' [ 27s] + xargs rm -f -- [ 27s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/lib/udev/rules.d [ 27s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/99-sensor.rules /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/lib/udev/rules.d [ 27s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/99-sensorhub.rules /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/lib/udev/rules.d [ 27s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/sensor-hal-tm2-1.0.3 [ 27s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/lib/sensor/libsensor-hal-tm2.so [ 27s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 27s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 27s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 27s] 159 blocks [ 27s] + /usr/lib/rpm/check-buildroot [ 27s] + /usr/lib/rpm//brp-compress [ 27s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 27s] + /usr/lib/rpm/brp-python-hardlink [ 27s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm [ 27s] Processing files: sensor-hal-tm2-1.0.3-4.1.armv7l [ 27s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 27s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 27s] [ 27s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.vyeACQ [ 27s] + umask 022 [ 27s] + cd /home/abuild/rpmbuild/BUILD [ 27s] + cd sensor-hal-tm2-1.0.3 [ 27s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/share/licenses/sensor-hal-tm2 [ 27s] + export LICENSEDIR [ 27s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/share/licenses/sensor-hal-tm2 [ 27s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm/usr/share/licenses/sensor-hal-tm2 [ 27s] + exit 0 [ 27s] Provides: libsensor-hal-tm2.so sensor-hal-tm2 = 1.0.3-4.1 sensor-hal-tm2(armv7l-32) = 1.0.3-4.1 [ 27s] Requires(interp): /bin/sh /bin/sh [ 27s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 27s] Requires(post): /bin/sh [ 27s] Requires(postun): /bin/sh [ 27s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.14) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 27s] Processing files: sensor-hal-tm2-debugsource-1.0.3-4.1.armv7l [ 27s] Provides: sensor-hal-tm2-debugsource = 1.0.3-4.1 sensor-hal-tm2-debugsource(armv7l-32) = 1.0.3-4.1 [ 27s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 27s] Processing files: sensor-hal-tm2-debuginfo-1.0.3-4.1.armv7l [ 27s] Provides: sensor-hal-tm2-debuginfo = 1.0.3-4.1 sensor-hal-tm2-debuginfo(armv7l-32) = 1.0.3-4.1 [ 27s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 27s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm [ 27s] warning: Could not canonicalize hostname: obspw27 [ 27s] Wrote: /home/abuild/rpmbuild/SRPMS/sensor-hal-tm2-1.0.3-4.1.src.rpm [ 28s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-hal-tm2-1.0.3-4.1.armv7l.rpm [ 28s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-hal-tm2-debugsource-1.0.3-4.1.armv7l.rpm [ 28s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-hal-tm2-debuginfo-1.0.3-4.1.armv7l.rpm [ 28s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.EjSHQ7 [ 28s] + umask 022 [ 28s] + cd /home/abuild/rpmbuild/BUILD [ 28s] + cd sensor-hal-tm2-1.0.3 [ 28s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/sensor-hal-tm2-1.0.3-4.1.arm [ 28s] + exit 0 [ 28s] ... checking for files with abuild user/group [ 28s] ... creating baselibs [ 28s] ... comparing built packages with the former built [ 28s] /usr/lib/build/pkg-diff.sh [ 29s] compare /.build.oldpackages/sensor-hal-tm2-1.0.3-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/sensor-hal-tm2-1.0.3-4.1.src.rpm [ 29s] This is not a prerelease project. Compare the project name. [ 29s] comparing rpmtags [ 29s] comparing RELEASE [ 29s] comparing PROVIDES [ 29s] comparing scripts [ 29s] comparing filelist [ 29s] comparing file checksum [ 29s] RPM meta information is identical [ 29s] compare /.build.oldpackages/sensor-hal-tm2-1.0.3-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-hal-tm2-1.0.3-4.1.armv7l.rpm [ 29s] Comparing sensor-hal-tm2-1.0.3-3.1.armv7l.rpm to sensor-hal-tm2-1.0.3-4.1.armv7l.rpm [ 29s] This is not a prerelease project. Compare the project name. [ 29s] comparing rpmtags [ 29s] --- /tmp/tmp.nRWG101753/tmp.fWwL101771 2017-05-20 00:53:47.551926591 +0000 [ 29s] +++ /tmp/tmp.nRWG101753/tmp.BZdI101773 2017-05-20 00:53:47.559926510 +0000 [ 29s] @@ -8,4 +8,4 @@ [ 29s] cpio xz 5T [ 29s] [ 29s] (none) (none) (none) [ 29s] -obs://build.tizen.org/Tizen:Unified/standard/d1ab0c4b21f1184d60a88ff02bff2454-sensor-hal-tm2 Tizen:Unified [ 29s] +obs://build.tizen.org/Tizen:Unified/standard/20e3a2d7c8d285e4f169ee9873f8c998-sensor-hal-tm2 Tizen:Unified [ 29s] RPM meta information is different [ 29s] compare /.build.oldpackages/sensor-hal-tm2-debuginfo-1.0.3-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-hal-tm2-debuginfo-1.0.3-4.1.armv7l.rpm [ 29s] skipping -debuginfo package [ 29s] compare /.build.oldpackages/sensor-hal-tm2-debugsource-1.0.3-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-hal-tm2-debugsource-1.0.3-4.1.armv7l.rpm [ 29s] Comparing sensor-hal-tm2-debugsource-1.0.3-3.1.armv7l.rpm to sensor-hal-tm2-debugsource-1.0.3-4.1.armv7l.rpm [ 29s] This is not a prerelease project. Compare the project name. [ 29s] comparing rpmtags [ 29s] --- /tmp/tmp.XdUX101793/tmp.vAeO101811 2017-05-20 00:53:47.791924175 +0000 [ 29s] +++ /tmp/tmp.XdUX101793/tmp.tLoS101813 2017-05-20 00:53:47.799924095 +0000 [ 29s] @@ -10,4 +10,4 @@ [ 29s] cpio xz 5T [ 29s] [ 29s] (none) (none) (none) [ 29s] -obs://build.tizen.org/Tizen:Unified/standard/d1ab0c4b21f1184d60a88ff02bff2454-sensor-hal-tm2 Tizen:Unified [ 29s] +obs://build.tizen.org/Tizen:Unified/standard/20e3a2d7c8d285e4f169ee9873f8c998-sensor-hal-tm2 Tizen:Unified [ 29s] RPM meta information is different [ 29s] [ 29s] obspw27 finished "build sensor-hal-tm2.spec" at Sat May 20 00:53:47 UTC 2017. [ 29s] Retried build at Wed May 31 08:31:59 2017 returned same result, skipped Retried build at Fri Jun 2 17:22:14 2017 returned same result, skipped Retried build at Mon Jun 5 15:15:18 2017 returned same result, skipped Retried build at Thu Jun 8 07:37:00 2017 returned same result, skipped Retried build at Sat Jun 10 00:32:23 2017 returned same result, skipped Retried build at Mon Jun 12 07:53:00 2017 returned same result, skipped Retried build at Tue Jun 13 02:04:12 2017 returned same result, skipped Retried build at Thu Jun 15 02:09:17 2017 returned same result, skipped Retried build at Thu Jun 15 23:49:33 2017 returned same result, skipped Retried build at Fri Jun 23 10:50:10 2017 returned same result, skipped Retried build at Mon Jun 26 16:13:31 2017 returned same result, skipped