[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_6 [ 0s] Using BUILD_ARCH=aarch64 [ 0s] [ 0s] [ 0s] obsnw05 started "build _service:gbs:mm-hal-interface.spec" at Mon Jun 11 01:58:51 UTC 2018. [ 0s] [ 0s] Building mm-hal-interface for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '4d6b713c75c9015f2e489aeb9d01e260' [ 0s] [ 0s] processing recipe /var/cache/build/root_6/.build-srcdir/_service:gbs:mm-hal-interface.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_6/.build-srcdir/_service:gbs:mm-hal-interface.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_6/.build.rpmlist /var/cache/build/root_6/.build-srcdir/_service:gbs:mm-hal-interface.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/6/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling bash... [ 1s] [6/40] preinstalling diffutils... [ 1s] [7/40] preinstalling grep... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libcap... [ 1s] [11/40] preinstalling libelf... [ 1s] [12/40] preinstalling libfreebl3... [ 1s] [13/40] preinstalling libgcc... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-aarch64... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling util-linux-su... [ 6s] [38/40] preinstalling nss... [ 6s] [39/40] preinstalling libsoftokn3... [ 6s] [40/40] preinstalling rpm... [ 6s] [ 6s] running qemu-linux-user-x86_64-cross postinstall script [ 6s] running qemu-accel-x86_64-aarch64 postinstall script [ 6s] running setup postinstall script [ 6s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 6s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 6s] initializing rpm db... [ 7s] reordering...cycle: gio-branding-upstream -> libgio [ 7s] breaking dependency libgio -> gio-branding-upstream [ 7s] cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/124] installing libmagic-data-5.32-10.101 [ 7s] [2/124] installing setup-0.9-5.16 [ 7s] [3/124] installing filesystem-3.1-6.1 [ 7s] [4/124] installing glibc-2.24-9.50 [ 7s] [5/124] installing bash-3.2.57-6.1 [ 7s] [6/124] installing binutils-2.27-10.52 [ 8s] [7/124] installing capi-base-common-0.4.27-15.1 [ 8s] [8/124] installing cpio-2.11-3.1 [ 8s] [9/124] installing diffutils-3.3-3.1 [ 8s] [10/124] installing findutils-4.3.8-5.233 [ 8s] [11/124] installing gdbm-1.8.3-4.1 [ 8s] [12/124] installing hostname-3.20-5.1 [ 8s] [13/124] installing iniparser-3.2-2.7 [ 8s] [14/124] installing libatomic-6.2.1-24.7 [ 8s] [15/124] installing libattr-2.4.47-5.86 [ 8s] [16/124] installing libbz2-1.0.6-4.279 [ 8s] [17/124] installing libcap-2.24-4.300 [ 8s] [18/124] installing libelf-0.153-3.103 [ 8s] [19/124] installing libelf0-0.8.13-5.1 [ 8s] [20/124] installing libext2fs-1.43.4-6.1 [ 8s] [21/124] installing libffi-3.1-3.1 [ 8s] [22/124] installing libfreebl3-3.34.1-5.83 [ 8s] [23/124] installing libgcc-6.2.1-24.7 [ 9s] [24/124] installing libgomp-6.2.1-24.7 [ 9s] [25/124] installing libitm-6.2.1-24.7 [ 9s] [26/124] installing libltdl-2.4.2-4.242 [ 9s] [27/124] installing liblua-5.1.5-4.8 [ 9s] [28/124] installing liblzma-5.2.3-5.113 [ 9s] [29/124] installing libpcre-8.41-5.1 [ 9s] [30/124] installing libpopt-1.16-4.44 [ 9s] [31/124] installing libpython-2.7.8-5.14 [ 9s] [32/124] installing libsmack-1.3.1-5.105 [ 9s] [33/124] installing libsmartcols-2.30-8.3 [ 9s] [34/124] installing libsqlite-3.21.0-10.28 [ 9s] [35/124] installing libuuid-2.30-8.3 [ 9s] [36/124] installing m4-1.4.17-3.1 [ 9s] [37/124] installing net-tools-2.0_20121208git-3.1 [ 9s] [38/124] installing nspr-4.12-4.24 [ 9s] [39/124] installing patch-2.7-3.44 [ 9s] [40/124] installing pkg-config-0.28-5.241 [ 9s] [41/124] installing sed-4.1c-4.1 [ 9s] [42/124] installing update-alternatives-1.18.15-3.1 [ 9s] [43/124] installing which-2.20-6.1 [ 9s] [44/124] installing zlib-1.2.11-4.298 [ 10s] [45/124] installing shadow-utils-4.1.4.2-6.1 [ 10s] [46/124] installing build-compare-2015.04.28-3.122 [ 10s] [47/124] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 11s] [48/124] installing terminfo-base-full-5.9-7.1 [ 11s] [49/124] installing capi-base-common-devel-0.4.27-15.1 [ 11s] [50/124] installing coreutils-6.9-3.1 [ 11s] [51/124] installing cpp-6.2.1-24.7 [ 12s] [52/124] installing gawk-3.1.5-5.1 [ 12s] [53/124] installing gcc-c++-6.2.1-24.7 [ 12s] [54/124] installing grep-2.5.2-6.1 [ 12s] [55/124] installing libacl-2.2.52-5.108 [ 13s] [56/124] installing libasm-0.153-3.103 [ 13s] [57/124] installing libblkid-2.30-8.3 [ 13s] [58/124] installing libcap-tools-2.24-4.300 [ 13s] [59/124] installing libgfortran-6.2.1-24.7 [ 13s] [60/124] installing libglib-2.52.2-13.1 [ 13s] [61/124] installing libopenssl-1.0.2o-7.14 [ 13s] [62/124] installing libpcreposix-8.41-5.1 [ 13s] [63/124] installing libstdc++-6.2.1-24.7 [ 13s] [64/124] installing make-4.0-4.24 [ 13s] [65/124] installing nss-certs-3.34.1-5.83 [ 13s] [66/124] installing smack-1.3.1-5.105 [ 13s] [67/124] installing bzip2-1.0.6-4.279 [ 13s] [68/124] installing libmagic-5.32-10.101 [ 13s] [69/124] installing libxml2-2.9.7-6.112 [ 13s] [70/124] installing xz-5.2.3-5.113 [ 14s] [71/124] installing libdw-0.153-3.103 [ 14s] [72/124] installing libstdc++-devel-6.2.1-24.7 [ 14s] [73/124] installing file-5.32-10.101 [ 14s] [74/124] installing libgmodule-2.52.2-13.1 [ 14s] [75/124] installing libgthread-2.52.2-13.1 [ 14s] [76/124] installing libmount-2.30-8.3 [ 14s] [77/124] installing libncurses-5.9-7.1 [ 14s] [78/124] installing libncurses6-5.9-7.1 [ 14s] [79/124] installing linux-glibc-devel-3.10-3.313 [ 15s] [80/124] installing tar-1.17-4.1 [ 15s] [81/124] installing db4-4.8.30.NC-3.289 [ 15s] [82/124] installing glibc-locale-2.24-9.50 [ 16s] [83/124] installing gzip-1.3.12-7.68 [ 16s] [84/124] installing libcc1-6.2.1-24.7 [ 16s] [85/124] installing libfdisk-2.30-8.3 [ 16s] [86/124] installing libgobject-2.52.2-13.1 [ 16s] [87/124] installing libubsan-6.2.1-24.7 [ 16s] [88/124] installing pam-1.1.6-4.1 [ 16s] [89/124] installing gtest-1.8.0-4.6 [ 16s] [90/124] installing libdlog-0.7-21.1 [ 16s] /var/tmp/rpm-tmp.gaGjZ7: line 2: systemctl: command not found [ 16s] Running libdlog %posttrans script [ 16s] [91/124] installing libpcrecpp-8.41-5.1 [ 16s] [92/124] installing tzdata-2018c-8.1 [ 17s] [93/124] installing elfutils-0.153-3.103 [ 17s] [94/124] installing security-config-1.0-33.1 [ 23s] groupadd: group 'dbus' already exists [ 23s] [95/124] installing shared-mime-info-1.7-5.7 [ 29s] [96/124] installing gtest-devel-1.8.0-4.6 [ 29s] [97/124] installing glibc-devel-2.24-9.50 [ 29s] [98/124] installing less-466-8.3 [ 29s] [99/124] installing libreadline-5.2-4.72 [ 29s] [100/124] installing procps-ng-3.3.12-6.3 [ 30s] [101/124] installing libdlog-devel-0.7-21.1 [ 30s] [102/124] installing perl-5.20.0-6.12 [ 31s] [103/124] installing pcre-devel-8.41-5.1 [ 31s] [104/124] installing capi-system-info-0.5.1-11.1 [ 31s] Running capi-system-info %posttrans script [ 31s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 31s] iniparser: cannot open /etc/info.ini [ 31s] [105/124] installing gcc-6.2.1-24.7 [ 32s] [106/124] installing build-mkbaselibs-20120927-3.1 [ 32s] [107/124] installing qemu-accel-x86_64-aarch64-0.4-12.9 [ 40s] [108/124] installing autoconf-2.69-5.29 [ 40s] [109/124] installing capi-system-info-devel-0.5.1-11.1 [ 40s] [110/124] installing python-2.7.8-5.14 [ 41s] [111/124] installing util-linux-2.30-8.3 [ 41s] [112/124] installing automake-1.15.1-6.51 [ 41s] [113/124] installing python-xml-2.7.8-5.14 [ 42s] [114/124] installing util-linux-su-2.30-8.3 [ 42s] [115/124] installing build-20120927-3.1 [ 42s] [116/124] installing libtool-2.4.2-4.242 [ 43s] [117/124] installing nss-3.34.1-5.83 [ 43s] [118/124] installing libgio-2.52.2-13.1 [ 43s] [119/124] installing gio-branding-upstream-2.52.2-13.1 [ 43s] [120/124] installing libsoftokn3-3.34.1-5.83 [ 43s] [121/124] installing glib2-tools-2.52.2-13.1 [ 43s] [122/124] installing rpm-4.11.0.1-8.82 [ 43s] [123/124] installing glib2-devel-2.52.2-13.1 [ 43s] [124/124] installing rpm-build-4.11.0.1-8.82 [ 44s] removing nis flags from /var/cache/build/root_6/etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 44s] build target is aarch64-tizen-linux [ 44s] ----------------------------------------------------------------- [ 44s] I have the following modifications for mm-hal-interface.spec: [ 44s] 5c5 [ 44s] < Release: 0 [ 44s] --- [ 44s] > Release: 7.1 [ 44s] ----------------------------------------------------------------- [ 44s] ----- building mm-hal-interface.spec (user abuild) [ 44s] ----------------------------------------------------------------- [ 44s] ----------------------------------------------------------------- [ 44s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/4d6b713c75c9015f2e489aeb9d01e260-mm-hal-interface' -ba /home/abuild/rpmbuild/SOURCES/mm-hal-interface.spec [ 44s] Building target platforms: aarch64-tizen-linux [ 44s] Building for target aarch64-tizen-linux [ 44s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jhIwsD [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + rm -rf mm-hal-interface-0.0.10 [ 44s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/mm-hal-interface-0.0.10.tar.gz [ 44s] + /bin/tar -xf - [ 44s] + STATUS=0 [ 44s] + '[' 0 -ne 0 ']' [ 44s] + cd mm-hal-interface-0.0.10 [ 44s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 44s] + exit 0 [ 44s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.RTW2Hb [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd mm-hal-interface-0.0.10 [ 44s] ++ uname -m [ 44s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 44s] + ref=/usr/lib/rpm [ 44s] + for s in guess sub [ 44s] ++ find -maxdepth 8 -name config.guess [ 44s] + for s in guess sub [ 44s] ++ find -maxdepth 8 -name config.sub [ 44s] + LANG=C [ 44s] + export LANG [ 44s] + unset DISPLAY [ 44s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 44s] + export CFLAGS [ 44s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 44s] + export CXXFLAGS [ 44s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 44s] + export FFLAGS [ 44s] + LDFLAGS= [ 44s] + export LDFLAGS [ 44s] + LD_AS_NEEDED=1 [ 44s] + export LD_AS_NEEDED [ 44s] + export 'CFLAGS+= -D_LARGEFILE64_SOURCE' [ 44s] + CFLAGS+=' -D_LARGEFILE64_SOURCE' [ 44s] + ./autogen.sh [ 44s] libtoolize: putting auxiliary files in `.'. [ 44s] libtoolize: copying file `./ltmain.sh' [ 44s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 44s] libtoolize: copying file `m4/libtool.m4' [ 45s] libtoolize: copying file `m4/ltoptions.m4' [ 45s] libtoolize: copying file `m4/ltsugar.m4' [ 45s] libtoolize: copying file `m4/ltversion.m4' [ 45s] libtoolize: copying file `m4/lt~obsolete.m4' [ 45s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 59s] configure.ac:9: installing './ar-lib' [ 59s] configure.ac:9: installing './compile' [ 59s] configure.ac:18: installing './config.guess' [ 59s] configure.ac:18: installing './config.sub' [ 59s] configure.ac:4: installing './install-sh' [ 59s] configure.ac:4: installing './missing' [ 60s] src/camera/Makefile.am: installing './depcomp' [ 60s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -D_LARGEFILE64_SOURCE' [ 60s] + export CFLAGS [ 60s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 60s] + export CXXFLAGS [ 60s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 60s] + export FFLAGS [ 60s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 61s] checking for a BSD-compatible install... /usr/bin/install -c [ 61s] checking whether build environment is sane... yes [ 61s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 61s] checking for gawk... gawk [ 61s] checking whether make sets $(MAKE)... yes [ 61s] checking whether make supports nested variables... yes [ 61s] checking for style of include used by make... GNU [ 61s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 61s] checking whether the C compiler works... yes [ 61s] checking for C compiler default output file name... a.out [ 61s] checking for suffix of executables... [ 61s] checking whether we are cross compiling... no [ 61s] checking for suffix of object files... o [ 61s] checking whether we are using the GNU C compiler... yes [ 61s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 61s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 61s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 61s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 61s] checking for aarch64-tizen-linux-gnu-ar... no [ 61s] checking for aarch64-tizen-linux-gnu-lib... no [ 61s] checking for aarch64-tizen-linux-gnu-link... no [ 61s] checking for ar... ar [ 61s] checking the archiver (ar) interface... ar [ 61s] checking for aarch64-tizen-linux-gnu-gcc... (cached) aarch64-tizen-linux-gnu-gcc [ 61s] checking whether we are using the GNU C compiler... (cached) yes [ 61s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 61s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... (cached) none needed [ 61s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 61s] checking dependency style of aarch64-tizen-linux-gnu-gcc... (cached) gcc3 [ 61s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 61s] checking whether we are using the GNU C++ compiler... yes [ 61s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 61s] checking dependency style of aarch64-tizen-linux-gnu-g++... gcc3 [ 61s] checking for an ANSI C-conforming const... yes [ 61s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 61s] checking for grep that handles long lines and -e... /usr/bin/grep [ 61s] checking for egrep... /usr/bin/grep -E [ 61s] checking for ANSI C header files... yes [ 61s] checking for sys/types.h... yes [ 61s] checking for sys/stat.h... yes [ 61s] checking for stdlib.h... yes [ 61s] checking for string.h... yes [ 61s] checking for memory.h... yes [ 62s] checking for strings.h... yes [ 62s] checking for inttypes.h... yes [ 62s] checking for stdint.h... yes [ 62s] checking for unistd.h... yes [ 62s] checking for stdbool.h that conforms to C99... yes [ 62s] checking for _Bool... yes [ 62s] checking for ANSI C header files... (cached) yes [ 62s] checking whether time.h and sys/time.h may both be included... yes [ 62s] checking whether aarch64-tizen-linux-gnu-gcc needs -traditional... no [ 62s] checking build system type... aarch64-tizen-linux-gnu [ 62s] checking host system type... aarch64-tizen-linux-gnu [ 62s] checking how to print strings... printf [ 62s] checking for a sed that does not truncate output... /usr/bin/sed [ 62s] checking for fgrep... /usr/bin/grep -F [ 62s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 62s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 62s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 62s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 62s] checking whether ln -s works... yes [ 62s] checking the maximum length of command line arguments... 1572864 [ 62s] checking whether the shell understands some XSI constructs... yes [ 62s] checking whether the shell understands "+="... yes [ 62s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 62s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 62s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 62s] checking for aarch64-tizen-linux-gnu-objdump... no [ 62s] checking for objdump... objdump [ 62s] checking how to recognize dependent libraries... pass_all [ 62s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 62s] checking for dlltool... no [ 62s] checking how to associate runtime and link libraries... printf %s\n [ 62s] checking for aarch64-tizen-linux-gnu-ar... ar [ 62s] checking for archiver @FILE support... @ [ 62s] checking for aarch64-tizen-linux-gnu-strip... no [ 62s] checking for strip... strip [ 62s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 62s] checking for ranlib... ranlib [ 62s] checking command to parse /usr/bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 62s] checking for sysroot... no [ 62s] checking for aarch64-tizen-linux-gnu-mt... no [ 62s] checking for mt... no [ 62s] checking if : is a manifest tool... no [ 62s] checking for dlfcn.h... yes [ 62s] checking for objdir... .libs [ 62s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 62s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 62s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 62s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 62s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 62s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 62s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 62s] checking whether -lc should be explicitly linked in... no [ 62s] checking dynamic linker characteristics... GNU/Linux ld.so [ 62s] checking how to hardcode library paths into programs... immediate [ 62s] checking whether stripping libraries is possible... yes [ 62s] checking if libtool supports shared libraries... yes [ 62s] checking whether to build shared libraries... yes [ 62s] checking whether to build static libraries... no [ 62s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 62s] checking for ld used by aarch64-tizen-linux-gnu-g++... /usr/aarch64-tizen-linux-gnu/bin/ld [ 62s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 62s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 62s] checking for aarch64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 62s] checking if aarch64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 62s] checking if aarch64-tizen-linux-gnu-g++ static flag -static works... no [ 62s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 62s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 62s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 62s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 62s] checking how to hardcode library paths into programs... immediate [ 62s] checking for aarch64-tizen-linux-gnu-pkg-config... /usr/bin/aarch64-tizen-linux-gnu-pkg-config [ 62s] checking pkg-config is at least version 0.9.0... yes [ 63s] checking for GLIB... yes [ 63s] checking for DLOG... yes [ 63s] checking for SYSTEM_INFO... yes [ 63s] checking that generated files are newer than configure... done [ 63s] configure: creating ./config.status [ 63s] config.status: creating Makefile [ 64s] config.status: creating src/Makefile [ 64s] config.status: creating src/camera/Makefile [ 64s] config.status: creating testcase/Makefile [ 64s] config.status: creating testcase/camera/Makefile [ 64s] config.status: creating camera-hal-interface.pc [ 64s] config.status: creating config.h [ 64s] config.status: executing depfiles commands [ 64s] config.status: executing libtool commands [ 64s] + make -j4 [ 64s] make all-recursive [ 64s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 64s] Making all in src [ 64s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 64s] Making all in camera [ 64s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src/camera' [ 64s] /bin/sh ../../libtool --tag=CC --mode=compile aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I./../../include/camera -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -D_LARGEFILE64_SOURCE -MT libcamera_hal_interface_la-camera_hal_interface.lo -MD -MP -MF .deps/libcamera_hal_interface_la-camera_hal_interface.Tpo -c -o libcamera_hal_interface_la-camera_hal_interface.lo `test -f 'camera_hal_interface.c' || echo './'`camera_hal_interface.c [ 64s] libtool: compile: aarch64-tizen-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I./../../include/camera -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -D_LARGEFILE64_SOURCE -MT libcamera_hal_interface_la-camera_hal_interface.lo -MD -MP -MF .deps/libcamera_hal_interface_la-camera_hal_interface.Tpo -c camera_hal_interface.c -fPIC -DPIC -o .libs/libcamera_hal_interface_la-camera_hal_interface.o [ 64s] mv -f .deps/libcamera_hal_interface_la-camera_hal_interface.Tpo .deps/libcamera_hal_interface_la-camera_hal_interface.Plo [ 64s] /bin/sh ../../libtool --tag=CC --mode=link aarch64-tizen-linux-gnu-gcc -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I./../../include/camera -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -D_LARGEFILE64_SOURCE -o libcamera_hal_interface.la -rpath /usr/lib64 libcamera_hal_interface_la-camera_hal_interface.lo -lglib-2.0 -ldlog -ldl [ 64s] libtool: link: aarch64-tizen-linux-gnu-gcc -shared -fPIC -DPIC .libs/libcamera_hal_interface_la-camera_hal_interface.o -Wl,--as-needed -lglib-2.0 -ldlog -ldl -O2 -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -Wl,-soname -Wl,libcamera_hal_interface.so.0 -o .libs/libcamera_hal_interface.so.0.0.0 [ 65s] libtool: link: (cd ".libs" && rm -f "libcamera_hal_interface.so.0" && ln -s "libcamera_hal_interface.so.0.0.0" "libcamera_hal_interface.so.0") [ 65s] libtool: link: (cd ".libs" && rm -f "libcamera_hal_interface.so" && ln -s "libcamera_hal_interface.so.0.0.0" "libcamera_hal_interface.so") [ 65s] libtool: link: ( cd ".libs" && rm -f "libcamera_hal_interface.la" && ln -s "../libcamera_hal_interface.la" "libcamera_hal_interface.la" ) [ 65s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src/camera' [ 65s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 65s] make[3]: Nothing to be done for 'all-am'. [ 65s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 65s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 65s] Making all in testcase [ 65s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 65s] Making all in camera [ 65s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase/camera' [ 65s] aarch64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I/usr/include/system -I./../../include/camera -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -MT camera_haltests-camera_haltests.o -MD -MP -MF .deps/camera_haltests-camera_haltests.Tpo -c -o camera_haltests-camera_haltests.o `test -f 'camera_haltests.cpp' || echo './'`camera_haltests.cpp [ 68s] mv -f .deps/camera_haltests-camera_haltests.Tpo .deps/camera_haltests-camera_haltests.Po [ 68s] /bin/sh ../../libtool --tag=CXX --mode=link aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -o camera_haltests camera_haltests-camera_haltests.o -ldl -lgtest ../../src/camera/libcamera_hal_interface.la -lglib-2.0 -ldlog -lcapi-system-info -lcapi-base-common [ 68s] libtool: link: aarch64-tizen-linux-gnu-g++ -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11 -o .libs/camera_haltests camera_haltests-camera_haltests.o -Wl,--as-needed /usr/lib64/libgtest.so ../../src/camera/.libs/libcamera_hal_interface.so -ldl -lglib-2.0 -ldlog -lcapi-system-info -lcapi-base-common -pthread -Wl,-rpath -Wl,/usr/lib64 [ 68s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase/camera' [ 68s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[3]: Nothing to be done for 'all-am'. [ 68s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 68s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 68s] + exit 0 [ 68s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.HL5jYW [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd mm-hal-interface-0.0.10 [ 68s] + LANG=C [ 68s] + export LANG [ 68s] + unset DISPLAY [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 [ 68s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 [ 68s] + install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/include [ 68s] + install -m 644 include/audio/tizen-audio.h /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/include [ 68s] + install -m 644 include/camera/camera_hal_interface.h include/camera/tizen-camera.h /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/include [ 68s] + install -m 644 include/radio/tizen-radio.h /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/include [ 68s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 install [ 68s] Making install in src [ 68s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 68s] Making install in camera [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src/camera' [ 68s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src/camera' [ 68s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64' [ 68s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libcamera_hal_interface.la '/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64' [ 68s] libtool: install: /usr/bin/install -c .libs/libcamera_hal_interface.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64/libcamera_hal_interface.so.0.0.0 [ 68s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64 && { ln -s -f libcamera_hal_interface.so.0.0.0 libcamera_hal_interface.so.0 || { rm -f libcamera_hal_interface.so.0 && ln -s libcamera_hal_interface.so.0.0.0 libcamera_hal_interface.so.0; }; }) [ 68s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64 && { ln -s -f libcamera_hal_interface.so.0.0.0 libcamera_hal_interface.so || { rm -f libcamera_hal_interface.so && ln -s libcamera_hal_interface.so.0.0.0 libcamera_hal_interface.so; }; }) [ 68s] libtool: install: /usr/bin/install -c .libs/libcamera_hal_interface.lai /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64/libcamera_hal_interface.la [ 68s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 68s] make[3]: Nothing to be done for 'install-data-am'. [ 68s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src/camera' [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src/camera' [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 68s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 68s] make[3]: Nothing to be done for 'install-exec-am'. [ 68s] make[3]: Nothing to be done for 'install-data-am'. [ 68s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 68s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/src' [ 68s] Making install in testcase [ 68s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] Making install in camera [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase/camera' [ 68s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase/camera' [ 68s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/bin' [ 68s] /bin/sh ../../libtool --mode=install /usr/bin/install -c camera_haltests '/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/bin' [ 68s] libtool: install: warning: `../../src/camera/libcamera_hal_interface.la' has not been installed in `/usr/lib64' [ 68s] libtool: install: /usr/bin/install -c .libs/camera_haltests /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/bin/camera_haltests [ 68s] make[3]: Nothing to be done for 'install-data-am'. [ 68s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase/camera' [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase/camera' [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[3]: Nothing to be done for 'install-exec-am'. [ 68s] make[3]: Nothing to be done for 'install-data-am'. [ 68s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/testcase' [ 68s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 68s] make[2]: Nothing to be done for 'install-exec-am'. [ 68s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64/pkgconfig' [ 68s] /usr/bin/install -c -m 644 camera-hal-interface.pc '/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64/pkgconfig' [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 68s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10' [ 68s] + rm -f /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/share/info/dir [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 -regex '.*\.la$' [ 68s] + xargs rm -f -- [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 -regex '.*\.a$' [ 68s] + xargs rm -f -- [ 68s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10 [ 68s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/bin/camera_haltests [ 69s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/lib64/libcamera_hal_interface.so.0.0.0 [ 69s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 69s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 69s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 69s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 69s] cpio: glibc-2.24/sysdeps/aarch64/start.S: Cannot stat: No such file or directory [ 69s] 188 blocks [ 69s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/mm-hal-interface-debuginfo.manifest [ 69s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/mm-hal-interface-0.0.10/mm-hal-interface-debugsource.manifest [ 69s] + /usr/lib/rpm/check-buildroot [ 69s] + /usr/lib/rpm//brp-compress [ 69s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 69s] + /usr/lib/rpm/brp-python-hardlink [ 69s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 [ 69s] Processing files: mm-hal-interface-0.0.10-7.1.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 69s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 69s] [ 69s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.AdHP6K [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd mm-hal-interface-0.0.10 [ 69s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/share/licenses/mm-hal-interface [ 69s] + export LICENSEDIR [ 69s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/share/licenses/mm-hal-interface [ 69s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/share/licenses/mm-hal-interface [ 69s] + exit 0 [ 69s] Provides: libcamera_hal_interface.so.0()(64bit) mm-hal-interface = 0.0.10-7.1 mm-hal-interface(aarch-64) = 0.0.10-7.1 [ 69s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 69s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 69s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.17)(64bit) libdlog.so.0()(64bit) libglib-2.0.so.0()(64bit) [ 69s] Processing files: mm-hal-interface-debugsource-0.0.10-7.1.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: mm-hal-interface-debugsource = 0.0.10-7.1 mm-hal-interface-debugsource(aarch-64) = 0.0.10-7.1 [ 69s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 69s] Processing files: mm-hal-interface-devel-0.0.10-7.1.aarch64 [ 69s] Provides: mm-hal-interface-devel = 0.0.10-7.1 mm-hal-interface-devel(aarch-64) = 0.0.10-7.1 pkgconfig(camera-hal-interface) = $VERSION [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Requires: /usr/bin/pkg-config libcamera_hal_interface.so.0()(64bit) pkgconfig(dlog) pkgconfig(glib-2.0) [ 69s] Processing files: camera-haltests-0.0.10-7.1.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 69s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 69s] [ 69s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.GobDPz [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd mm-hal-interface-0.0.10 [ 69s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/share/licenses/camera-haltests [ 69s] + export LICENSEDIR [ 69s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/share/licenses/camera-haltests [ 69s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64/usr/share/licenses/camera-haltests [ 69s] + exit 0 [ 69s] Provides: camera-haltests = 0.0.10-7.1 camera-haltests(aarch-64) = 0.0.10-7.1 [ 69s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Requires(post): /sbin/ldconfig [ 69s] Requires(postun): /sbin/ldconfig [ 69s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcamera_hal_interface.so.0()(64bit) libcapi-system-info.so.0()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libglib-2.0.so.0()(64bit) libgtest.so.0()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 69s] Processing files: mm-hal-interface-debuginfo-0.0.10-7.1.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: mm-hal-interface-debuginfo = 0.0.10-7.1 mm-hal-interface-debuginfo(aarch-64) = 0.0.10-7.1 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Processing files: camera-haltests-debuginfo-0.0.10-7.1.aarch64 [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: camera-haltests-debuginfo = 0.0.10-7.1 camera-haltests-debuginfo(aarch-64) = 0.0.10-7.1 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 [ 69s] warning: Could not canonicalize hostname: obsnw05 [ 69s] Wrote: /home/abuild/rpmbuild/SRPMS/mm-hal-interface-0.0.10-7.1.src.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-0.0.10-7.1.aarch64.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-debugsource-0.0.10-7.1.aarch64.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-devel-0.0.10-7.1.aarch64.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/camera-haltests-0.0.10-7.1.aarch64.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-debuginfo-0.0.10-7.1.aarch64.rpm [ 70s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/camera-haltests-debuginfo-0.0.10-7.1.aarch64.rpm [ 70s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.q4q7Uc [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd mm-hal-interface-0.0.10 [ 70s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/mm-hal-interface-0.0.10-7.1.aarch64 [ 70s] + exit 0 [ 70s] ... checking for files with abuild user/group [ 70s] ... creating baselibs [ 70s] ... comparing built packages with the former built [ 70s] /usr/lib/build/pkg-diff.sh [ 70s] compare /.build.oldpackages/mm-hal-interface-0.0.9-6.1.src.rpm /home/abuild/rpmbuild/SRPMS/mm-hal-interface-0.0.10-7.1.src.rpm [ 70s] This is not a prerelease project. Compare the project name. [ 70s] comparing rpmtags [ 70s] comparing RELEASE [ 71s] comparing PROVIDES [ 71s] comparing scripts [ 71s] comparing filelist [ 71s] comparing file checksum [ 71s] RPM meta information is identical [ 71s] compare /.build.oldpackages/camera-haltests-0.0.9-6.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/camera-haltests-0.0.10-7.1.aarch64.rpm [ 71s] Comparing camera-haltests-0.0.9-6.1.aarch64.rpm to camera-haltests-0.0.10-7.1.aarch64.rpm [ 71s] This is not a prerelease project. Compare the project name. [ 71s] comparing rpmtags [ 71s] --- /tmp/tmp.OTXsX66151/tmp.DurlV66193 2018-06-11 02:00:02.314422023 +0000 [ 71s] +++ /tmp/tmp.OTXsX66151/tmp.MbsTk66196 2018-06-11 02:00:02.322421907 +0000 [ 71s] @@ -1,4 +1,4 @@ [ 71s] -camera-haltests 0.0.9 (none) [ 71s] +camera-haltests 0.0.10 (none) [ 71s] gtest for camera HAL APIs [ 71s] gtest for camera HAL APIs. [ 71s] tizen [ 71s] @@ -8,4 +8,4 @@ [ 71s] cpio xz 5T [ 71s] [ 71s] (none) (none) (none) [ 71s] -obs://build.tizen.org/Tizen:Unified/standard/abaeba73763bcb7407aedf1dbacfd376-mm-hal-interface Tizen:Unified [ 71s] +obs://build.tizen.org/Tizen:Unified/standard/4d6b713c75c9015f2e489aeb9d01e260-mm-hal-interface Tizen:Unified [ 71s] RPM meta information is different [ 71s] compare /.build.oldpackages/camera-haltests-debuginfo-0.0.9-6.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/camera-haltests-debuginfo-0.0.10-7.1.aarch64.rpm [ 71s] skipping -debuginfo package [ 71s] compare /.build.oldpackages/mm-hal-interface-0.0.9-6.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-0.0.10-7.1.aarch64.rpm [ 71s] Comparing mm-hal-interface-0.0.9-6.1.aarch64.rpm to mm-hal-interface-0.0.10-7.1.aarch64.rpm [ 71s] This is not a prerelease project. Compare the project name. [ 71s] comparing rpmtags [ 71s] --- /tmp/tmp.ARPkx66243/tmp.EWoFd66289 2018-06-11 02:00:02.558418488 +0000 [ 71s] +++ /tmp/tmp.ARPkx66243/tmp.eamBj66294 2018-06-11 02:00:02.566418372 +0000 [ 71s] @@ -1,4 +1,4 @@ [ 71s] -mm-hal-interface 0.0.9 (none) [ 71s] +mm-hal-interface 0.0.10 (none) [ 71s] Multimedia HAL Interface [ 71s] Multimedia framework hardware abstraction layer interface package. [ 71s] tizen [ 71s] @@ -8,4 +8,4 @@ [ 71s] cpio xz 5T [ 71s] [ 71s] (none) (none) (none) [ 71s] -obs://build.tizen.org/Tizen:Unified/standard/abaeba73763bcb7407aedf1dbacfd376-mm-hal-interface Tizen:Unified [ 71s] +obs://build.tizen.org/Tizen:Unified/standard/4d6b713c75c9015f2e489aeb9d01e260-mm-hal-interface Tizen:Unified [ 71s] RPM meta information is different [ 71s] compare /.build.oldpackages/mm-hal-interface-debuginfo-0.0.9-6.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-debuginfo-0.0.10-7.1.aarch64.rpm [ 71s] skipping -debuginfo package [ 71s] compare /.build.oldpackages/mm-hal-interface-debugsource-0.0.9-6.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-debugsource-0.0.10-7.1.aarch64.rpm [ 71s] Comparing mm-hal-interface-debugsource-0.0.9-6.1.aarch64.rpm to mm-hal-interface-debugsource-0.0.10-7.1.aarch64.rpm [ 71s] This is not a prerelease project. Compare the project name. [ 71s] comparing rpmtags [ 71s] --- /tmp/tmp.vbJpr66356/tmp.qELmS66390 2018-06-11 02:00:02.790415127 +0000 [ 71s] +++ /tmp/tmp.vbJpr66356/tmp.lzxve66394 2018-06-11 02:00:02.798415011 +0000 [ 71s] @@ -1,4 +1,4 @@ [ 71s] -mm-hal-interface-debugsource 0.0.9 (none) [ 71s] +mm-hal-interface-debugsource 0.0.10 (none) [ 71s] Debug sources for package mm-hal-interface [ 71s] This package provides debug sources for package mm-hal-interface. [ 71s] Debug sources are useful when developing applications that use this [ 71s] @@ -10,4 +10,4 @@ [ 71s] cpio xz 5T [ 71s] [ 71s] (none) (none) (none) [ 71s] -obs://build.tizen.org/Tizen:Unified/standard/abaeba73763bcb7407aedf1dbacfd376-mm-hal-interface Tizen:Unified [ 71s] +obs://build.tizen.org/Tizen:Unified/standard/4d6b713c75c9015f2e489aeb9d01e260-mm-hal-interface Tizen:Unified [ 71s] RPM meta information is different [ 71s] compare /.build.oldpackages/mm-hal-interface-devel-0.0.9-6.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/mm-hal-interface-devel-0.0.10-7.1.aarch64.rpm [ 71s] Comparing mm-hal-interface-devel-0.0.9-6.1.aarch64.rpm to mm-hal-interface-devel-0.0.10-7.1.aarch64.rpm [ 72s] This is not a prerelease project. Compare the project name. [ 72s] comparing rpmtags [ 72s] --- /tmp/tmp.pQLNW66419/tmp.vRfcU66452 2018-06-11 02:00:03.054411326 +0000 [ 72s] +++ /tmp/tmp.pQLNW66419/tmp.cYBil66463 2018-06-11 02:00:03.062411214 +0000 [ 72s] @@ -1,4 +1,4 @@ [ 72s] -mm-hal-interface-devel 0.0.9 (none) [ 72s] +mm-hal-interface-devel 0.0.10 (none) [ 72s] Multimedia framework hardware abstraction layer interface development package [ 72s] Multimedia framework hardware abstraction layer interface development package. [ 72s] tizen [ 72s] @@ -8,4 +8,4 @@ [ 72s] cpio xz 5T [ 72s] [ 72s] (none) (none) (none) [ 72s] -obs://build.tizen.org/Tizen:Unified/standard/abaeba73763bcb7407aedf1dbacfd376-mm-hal-interface Tizen:Unified [ 72s] +obs://build.tizen.org/Tizen:Unified/standard/4d6b713c75c9015f2e489aeb9d01e260-mm-hal-interface Tizen:Unified [ 72s] RPM meta information is different [ 72s] [ 72s] obsnw05 finished "build mm-hal-interface.spec" at Mon Jun 11 02:00:03 UTC 2018. [ 72s] Retried build at Fri Jun 15 22:27:02 2018 returned same result, skipped Retried build at Tue Jun 19 14:43:52 2018 returned same result, skipped Retried build at Thu Jun 21 14:27:53 2018 returned same result, skipped Retried build at Mon Jun 25 09:26:28 2018 returned same result, skipped Retried build at Fri Jun 29 06:24:39 2018 returned same result, skipped Retried build at Wed Jul 4 15:54:29 2018 returned same result, skipped Retried build at Thu Jul 5 08:24:37 2018 returned same result, skipped Retried build at Fri Jul 6 06:41:19 2018 returned same result, skipped Retried build at Fri Jul 6 19:15:05 2018 returned same result, skipped Retried build at Fri Jul 13 16:16:14 2018 returned same result, skipped Retried build at Sat Jul 14 04:01:03 2018 returned same result, skipped