[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_8 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw02 started "build _service:gbs:libexynos-common.spec" at Wed Mar 28 01:48:43 UTC 2018. [ 0s] [ 0s] Building libexynos-common for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'dea3a58b04afa02ee4d3e66146e5d054' [ 0s] [ 0s] processing recipe /var/cache/build/root_8/.build-srcdir/_service:gbs:libexynos-common.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_8/.build-srcdir/_service:gbs:libexynos-common.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_8/.build.rpmlist /var/cache/build/root_8/.build-srcdir/_service:gbs:libexynos-common.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/8/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/97] installing kernel-headers-exynos7270-tw2-3.18.14-13.3 [ 7s] [2/97] installing libmagic-data-5.32-10.48 [ 7s] [3/97] installing setup-0.9-5.8 [ 8s] warning: /etc/profile created as /etc/profile.rpmnew [ 8s] [4/97] installing filesystem-3.1-6.1 [ 8s] [5/97] installing glibc-2.24-9.18 [ 8s] [6/97] installing glibc-devel-2.24-9.18 [ 8s] [7/97] installing libatomic-6.2.1-20.9 [ 8s] [8/97] installing libgcc-6.2.1-20.9 [ 8s] [9/97] installing bash-3.2.57-6.1 [ 8s] [10/97] installing binutils-2.27-10.18 [ 8s] [11/97] installing capi-base-common-0.4.23-11.2 [ 8s] [12/97] installing cpio-2.11-3.1 [ 8s] [13/97] installing diffutils-3.3-3.1 [ 8s] [14/97] installing findutils-4.3.8-5.168 [ 8s] [15/97] installing hostname-3.12-4.1 [ 9s] [16/97] installing libattr-2.4.47-5.19 [ 9s] [17/97] installing libbz2-1.0.6-4.212 [ 9s] [18/97] installing libcap-2.24-4.232 [ 9s] [19/97] installing libelf-0.153-3.73 [ 9s] [20/97] installing libext2fs-1.43.4-5.2 [ 9s] [21/97] installing libfreebl3-3.34.1-5.32 [ 9s] [22/97] installing libgfortran-6.2.1-20.9 [ 9s] [23/97] installing libgomp-6.2.1-20.9 [ 9s] [24/97] installing libitm-6.2.1-20.9 [ 9s] [25/97] installing libltdl-2.4.2-4.195 [ 9s] [26/97] installing liblua-5.1.4-3.31 [ 9s] [27/97] installing liblzma-5.2.3-5.44 [ 9s] [28/97] installing libpcre-8.41-5.1 [ 9s] [29/97] installing libpopt-1.16-4.32 [ 9s] [30/97] installing libsmack-1.3.1-5.40 [ 9s] [31/97] installing libsmartcols-2.30-8.1 [ 10s] [32/97] installing libsqlite-3.21.0-10.9 [ 10s] [33/97] installing libstdc++-6.2.1-20.9 [ 10s] [34/97] installing libuuid-2.30-8.1 [ 10s] [35/97] installing m4-1.4.17-3.1 [ 10s] [36/97] installing net-tools-2.0_20121208git-3.1 [ 10s] [37/97] installing nspr-4.12-4.11 [ 10s] [38/97] installing patch-2.7-3.32 [ 10s] [39/97] installing pkg-config-0.28-5.169 [ 10s] [40/97] installing sed-4.1c-4.1 [ 10s] [41/97] installing update-alternatives-1.18.15-3.1 [ 10s] [42/97] installing which-2.20-6.1 [ 10s] [43/97] installing zlib-1.2.11-4.226 [ 10s] [44/97] installing build-compare-2015.04.28-3.96 [ 10s] [45/97] installing libstdc++-devel-6.2.1-20.9 [ 10s] [46/97] installing qemu-linux-user-x86_64-cross-2.7.0-1.4.1 [ 11s] [47/97] installing terminfo-base-full-5.9-5.128 [ 11s] [48/97] installing capi-base-common-devel-0.4.23-11.2 [ 12s] [49/97] installing cpp-6.2.1-20.9 [ 12s] [50/97] installing gcc-c++-6.2.1-20.9 [ 13s] [51/97] installing coreutils-6.9-3.1 [ 13s] [52/97] installing db4-4.8.30.NC-3.215 [ 13s] [53/97] installing gawk-3.1.5-5.1 [ 13s] [54/97] installing grep-2.5.2-6.1 [ 13s] [55/97] installing libacl-2.2.52-5.41 [ 13s] [56/97] installing libasm-0.153-3.73 [ 13s] [57/97] installing libblkid-2.30-8.1 [ 13s] [58/97] installing libcc1-6.2.1-20.9 [ 13s] [59/97] installing libubsan-6.2.1-20.9 [ 13s] [60/97] installing make-4.0-4.11 [ 13s] [61/97] installing nss-certs-3.34.1-5.32 [ 13s] [62/97] installing smack-1.3.1-5.40 [ 13s] [63/97] installing bzip2-1.0.6-4.212 [ 13s] [64/97] installing libmagic-5.32-10.48 [ 14s] [65/97] installing libxml2-2.9.7-6.60 [ 14s] [66/97] installing xz-5.2.3-5.44 [ 14s] [67/97] installing libdw-0.153-3.73 [ 14s] [68/97] installing file-5.32-10.48 [ 14s] [69/97] installing glibc-locale-2.24-9.18 [ 14s] [70/97] installing libmount-2.30-8.1 [ 14s] [71/97] installing libncurses-5.9-5.128 [ 14s] [72/97] installing libncurses6-5.9-5.128 [ 14s] [73/97] installing tar-1.17-4.1 [ 14s] [74/97] installing gzip-1.3.12-7.1 [ 14s] [75/97] installing libfdisk-2.30-8.1 [ 14s] [76/97] installing pam-1.1.6-4.1 [ 15s] [77/97] installing libdlog-0.7-13.2 [ 15s] /var/tmp/rpm-tmp.UsCiHg: line 2: systemctl: command not found [ 15s] Running libdlog %posttrans script [ 15s] [78/97] installing perl-5.20.0-4.60 [ 16s] [79/97] installing tzdata-2018c-8.1 [ 16s] [80/97] installing elfutils-0.153-3.73 [ 16s] [81/97] installing gcc-6.2.1-20.9 [ 17s] [82/97] installing build-mkbaselibs-20120927-3.1 [ 17s] [83/97] installing qemu-accel-x86_64-armv7l-0.4-11.14 [ 23s] [84/97] installing autoconf-2.69-3.225 [ 23s] [85/97] installing less-466-8.1 [ 23s] [86/97] installing libdlog-devel-0.7-13.2 [ 23s] [87/97] installing libreadline-5.2-4.15 [ 23s] [88/97] installing procps-ng-3.3.12-6.1 [ 23s] [89/97] installing automake-1.15.1-6.7 [ 23s] [90/97] installing build-20120927-3.1 [ 23s] [91/97] installing util-linux-2.30-8.1 [ 23s] [92/97] installing libtool-2.4.2-4.195 [ 24s] [93/97] installing util-linux-su-2.30-8.1 [ 24s] [94/97] installing nss-3.34.1-5.32 [ 24s] [95/97] installing libsoftokn3-3.34.1-5.32 [ 24s] [96/97] installing rpm-4.11.0.1-8.35 [ 24s] [97/97] installing rpm-build-4.11.0.1-8.35 [ 24s] removing nis flags from /var/cache/build/root_8/etc/nsswitch.conf... [ 24s] now finalizing build dir... [ 25s] build target is armv7l-tizen-linux [ 25s] ----------------------------------------------------------------- [ 25s] I have the following modifications for libexynos-common.spec: [ 25s] 7c7 [ 25s] < Release: 0 [ 25s] --- [ 25s] > Release: 7.2 [ 25s] ----------------------------------------------------------------- [ 25s] ----- building libexynos-common.spec (user abuild) [ 25s] ----------------------------------------------------------------- [ 25s] ----------------------------------------------------------------- [ 25s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/dea3a58b04afa02ee4d3e66146e5d054-libexynos-common' -ba /home/abuild/rpmbuild/SOURCES/libexynos-common.spec [ 25s] Building target platforms: armv7l-tizen-linux [ 25s] Building for target armv7l-tizen-linux [ 25s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.KEUlHT [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + rm -rf libexynos-common-0.0.1 [ 25s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libexynos-common-0.0.1.tar.gz [ 25s] + /bin/tar -xf - [ 25s] + STATUS=0 [ 25s] + '[' 0 -ne 0 ']' [ 25s] + cd libexynos-common-0.0.1 [ 25s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 25s] + exit 0 [ 25s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Wegvcq [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd libexynos-common-0.0.1 [ 25s] ++ uname -m [ 25s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 25s] + LANG=C [ 25s] + export LANG [ 25s] + unset DISPLAY [ 25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 25s] + export CFLAGS [ 25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 25s] + export CXXFLAGS [ 25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 25s] + export FFLAGS [ 25s] + LDFLAGS= [ 25s] + export LDFLAGS [ 25s] + LD_AS_NEEDED=1 [ 25s] + export LD_AS_NEEDED [ 25s] + ./autogen.sh [ 27s] autoreconf: Entering directory `.' [ 27s] autoreconf: configure.ac: not using Gettext [ 28s] autoreconf: running: aclocal --force [ 32s] autoreconf: configure.ac: tracing [ 33s] autoreconf: running: libtoolize --copy --force [ 33s] libtoolize: putting auxiliary files in `.'. [ 33s] libtoolize: copying file `./ltmain.sh' [ 33s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 33s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 33s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 37s] autoreconf: running: /usr/bin/autoconf --force [ 41s] autoreconf: running: /usr/bin/autoheader --force [ 42s] autoreconf: running: automake --add-missing --copy --force-missing [ 45s] configure.ac:13: installing './compile' [ 45s] configure.ac:24: installing './config.guess' [ 45s] configure.ac:24: installing './config.sub' [ 45s] configure.ac:9: installing './install-sh' [ 45s] configure.ac:9: installing './missing' [ 45s] libcsc/Makefile.am: installing './depcomp' [ 48s] autoreconf: Leaving directory `.' [ 48s] checking for a BSD-compatible install... /bin/install -c [ 48s] checking whether build environment is sane... yes [ 48s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 48s] checking for gawk... gawk [ 48s] checking whether make sets $(MAKE)... yes [ 48s] checking whether make supports nested variables... yes [ 48s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 48s] ./configure: line 3069: i: command not found [ 48s] checking for style of include used by make... GNU [ 48s] checking for gcc... gcc [ 48s] checking whether the C compiler works... yes [ 48s] checking for C compiler default output file name... a.out [ 48s] checking for suffix of executables... [ 48s] checking whether we are cross compiling... no [ 48s] checking for suffix of object files... o [ 48s] checking whether we are using the GNU C compiler... yes [ 48s] checking whether gcc accepts -g... yes [ 48s] checking for gcc option to accept ISO C89... none needed [ 48s] checking whether gcc understands -c and -o together... yes [ 48s] checking dependency style of gcc... gcc3 [ 48s] checking dependency style of gcc... gcc3 [ 48s] checking for gcc... (cached) gcc [ 48s] checking whether we are using the GNU C compiler... (cached) yes [ 48s] checking whether gcc accepts -g... (cached) yes [ 48s] checking for gcc option to accept ISO C89... (cached) none needed [ 48s] checking whether gcc understands -c and -o together... (cached) yes [ 48s] checking dependency style of gcc... (cached) gcc3 [ 48s] checking for g++... g++ [ 48s] checking whether we are using the GNU C++ compiler... yes [ 48s] checking whether g++ accepts -g... yes [ 48s] checking dependency style of g++... gcc3 [ 49s] checking how to run the C preprocessor... gcc -E [ 49s] checking for grep that handles long lines and -e... /bin/grep [ 49s] checking for egrep... /bin/grep -E [ 49s] checking for ANSI C header files... yes [ 49s] checking for sys/types.h... yes [ 49s] checking for sys/stat.h... yes [ 49s] checking for stdlib.h... yes [ 49s] checking for string.h... yes [ 49s] checking for memory.h... yes [ 49s] checking for strings.h... yes [ 49s] checking for inttypes.h... yes [ 49s] checking for stdint.h... yes [ 49s] checking for unistd.h... yes [ 49s] checking minix/config.h usability... no [ 49s] checking minix/config.h presence... no [ 49s] checking for minix/config.h... no [ 49s] checking whether it is safe to define __EXTENSIONS__... yes [ 49s] checking for special C compiler options needed for large files... no [ 49s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 49s] checking for size_t... yes [ 49s] checking for working alloca.h... yes [ 49s] checking for alloca... yes [ 49s] checking build system type... armv7l-tizen-linux-gnueabi [ 49s] checking host system type... armv7l-tizen-linux-gnueabi [ 49s] checking how to print strings... printf [ 49s] checking for a sed that does not truncate output... /bin/sed [ 49s] checking for fgrep... /bin/grep -F [ 49s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 49s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 49s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 49s] checking the name lister (/bin/nm -B) interface... BSD nm [ 49s] checking whether ln -s works... yes [ 49s] checking the maximum length of command line arguments... 1572864 [ 49s] checking whether the shell understands some XSI constructs... yes [ 49s] checking whether the shell understands "+="... yes [ 49s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 49s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 49s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 49s] checking for objdump... objdump [ 49s] checking how to recognize dependent libraries... pass_all [ 49s] checking for dlltool... no [ 49s] checking how to associate runtime and link libraries... printf %s\n [ 49s] checking for ar... ar [ 49s] checking for archiver @FILE support... @ [ 49s] checking for strip... strip [ 49s] checking for ranlib... ranlib [ 50s] checking command to parse /bin/nm -B output from gcc object... ok [ 50s] checking for sysroot... no [ 50s] checking for mt... no [ 50s] checking if : is a manifest tool... no [ 50s] checking for dlfcn.h... yes [ 50s] checking for objdir... .libs [ 50s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 50s] checking for gcc option to produce PIC... -fPIC -DPIC [ 50s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 50s] checking if gcc static flag -static works... no [ 50s] checking if gcc supports -c -o file.o... yes [ 50s] checking if gcc supports -c -o file.o... (cached) yes [ 50s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 50s] checking whether -lc should be explicitly linked in... no [ 50s] checking dynamic linker characteristics... GNU/Linux ld.so [ 50s] checking how to hardcode library paths into programs... immediate [ 50s] checking whether stripping libraries is possible... yes [ 50s] checking if libtool supports shared libraries... yes [ 50s] checking whether to build shared libraries... yes [ 50s] checking whether to build static libraries... no [ 50s] checking how to run the C++ preprocessor... g++ -E [ 50s] checking for ld used by g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 50s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 50s] checking whether the g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 50s] checking for g++ option to produce PIC... -fPIC -DPIC [ 50s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 50s] checking if g++ static flag -static works... no [ 50s] checking if g++ supports -c -o file.o... yes [ 50s] checking if g++ supports -c -o file.o... (cached) yes [ 50s] checking whether the g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 50s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 50s] checking how to hardcode library paths into programs... immediate [ 50s] checking whether make supports nested variables... (cached) yes [ 50s] checking that generated files are newer than configure... done [ 50s] configure: creating ./config.status [ 51s] config.status: creating Makefile [ 51s] config.status: creating libv4l2/Makefile [ 51s] config.status: creating libswconverter/Makefile [ 51s] config.status: creating libcsc/Makefile [ 51s] config.status: creating libgscaler/Makefile [ 51s] config.status: creating libion/Makefile [ 51s] config.status: creating config.h [ 51s] config.status: executing depfiles commands [ 51s] config.status: executing libtool commands [ 51s] [ 51s] libexynos 1.0.0 will be compiled with: [ 51s] [ 51s] [ 51s] + export 'CFLAGS+= -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 51s] + CFLAGS+=' -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 51s] + LDFLAGS+='-Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed' [ 51s] + export LDFLAGS [ 51s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS' [ 51s] + export CFLAGS [ 51s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 51s] + export CXXFLAGS [ 51s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 51s] + export FFLAGS [ 51s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static --enable-dlog [ 52s] checking for a BSD-compatible install... /bin/install -c [ 52s] checking whether build environment is sane... yes [ 52s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 52s] checking for gawk... gawk [ 52s] checking whether make sets $(MAKE)... yes [ 52s] checking whether make supports nested variables... yes [ 52s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 52s] ./configure: line 3069: i: command not found [ 52s] checking for style of include used by make... GNU [ 52s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 52s] checking whether the C compiler works... yes [ 52s] checking for C compiler default output file name... a.out [ 52s] checking for suffix of executables... [ 52s] checking whether we are cross compiling... no [ 52s] checking for suffix of object files... o [ 52s] checking whether we are using the GNU C compiler... yes [ 52s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 52s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 52s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 52s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 52s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 52s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 52s] checking whether we are using the GNU C compiler... (cached) yes [ 52s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 52s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 52s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 52s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 52s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 52s] checking whether we are using the GNU C++ compiler... yes [ 52s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 52s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 52s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 52s] checking for grep that handles long lines and -e... /bin/grep [ 52s] checking for egrep... /bin/grep -E [ 53s] checking for ANSI C header files... yes [ 53s] checking for sys/types.h... yes [ 53s] checking for sys/stat.h... yes [ 53s] checking for stdlib.h... yes [ 53s] checking for string.h... yes [ 53s] checking for memory.h... yes [ 53s] checking for strings.h... yes [ 53s] checking for inttypes.h... yes [ 53s] checking for stdint.h... yes [ 53s] checking for unistd.h... yes [ 53s] checking minix/config.h usability... no [ 53s] checking minix/config.h presence... no [ 53s] checking for minix/config.h... no [ 53s] checking whether it is safe to define __EXTENSIONS__... yes [ 53s] checking for special C compiler options needed for large files... no [ 53s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 53s] checking for size_t... yes [ 53s] checking for working alloca.h... yes [ 53s] checking for alloca... yes [ 53s] checking build system type... armv7l-tizen-linux-gnueabi [ 53s] checking host system type... armv7l-tizen-linux-gnueabi [ 53s] checking how to print strings... printf [ 53s] checking for a sed that does not truncate output... /bin/sed [ 53s] checking for fgrep... /bin/grep -F [ 53s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 53s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 53s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 53s] checking the name lister (/bin/nm -B) interface... BSD nm [ 53s] checking whether ln -s works... yes [ 53s] checking the maximum length of command line arguments... 1572864 [ 53s] checking whether the shell understands some XSI constructs... yes [ 53s] checking whether the shell understands "+="... yes [ 53s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 53s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 53s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 53s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 53s] checking for objdump... objdump [ 53s] checking how to recognize dependent libraries... pass_all [ 53s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 53s] checking for dlltool... no [ 53s] checking how to associate runtime and link libraries... printf %s\n [ 53s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 53s] checking for ar... ar [ 53s] checking for archiver @FILE support... @ [ 53s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 53s] checking for strip... strip [ 53s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 53s] checking for ranlib... ranlib [ 53s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 53s] checking for sysroot... no [ 53s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 53s] checking for mt... no [ 53s] checking if : is a manifest tool... no [ 53s] checking for dlfcn.h... yes [ 53s] checking for objdir... .libs [ 53s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 53s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 53s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 53s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 53s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 53s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 54s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 54s] checking whether -lc should be explicitly linked in... no [ 54s] checking dynamic linker characteristics... GNU/Linux ld.so [ 54s] checking how to hardcode library paths into programs... immediate [ 54s] checking whether stripping libraries is possible... yes [ 54s] checking if libtool supports shared libraries... yes [ 54s] checking whether to build shared libraries... yes [ 54s] checking whether to build static libraries... no [ 54s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 54s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 54s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 54s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 54s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 54s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 54s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 54s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 54s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 54s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 54s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 54s] checking how to hardcode library paths into programs... immediate [ 54s] checking whether make supports nested variables... (cached) yes [ 54s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 54s] checking pkg-config is at least version 0.9.0... yes [ 54s] checking for DLOG... yes [ 54s] checking that generated files are newer than configure... done [ 54s] configure: creating ./config.status [ 55s] config.status: creating Makefile [ 55s] config.status: creating libv4l2/Makefile [ 55s] config.status: creating libswconverter/Makefile [ 55s] config.status: creating libcsc/Makefile [ 55s] config.status: creating libgscaler/Makefile [ 55s] config.status: creating libion/Makefile [ 55s] config.status: creating config.h [ 55s] config.status: config.h is unchanged [ 55s] config.status: executing depfiles commands [ 55s] config.status: executing libtool commands [ 55s] [ 55s] libexynos 1.0.0 will be compiled with: [ 55s] [ 55s] [ 55s] + make [ 55s] make all-recursive [ 55s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 55s] Making all in libion [ 55s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 55s] CC libion_la-ion.lo [ 55s] CCLD libion.la [ 55s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 55s] Making all in libv4l2 [ 55s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 55s] CC libexynosv4l2_la-exynos_v4l2.lo [ 56s] CC libexynosv4l2_la-exynos_subdev.lo [ 56s] CC libexynosv4l2_la-exynos_mc.lo [ 56s] CCLD libexynosv4l2.la [ 56s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 56s] Making all in libswconverter [ 56s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 56s] CC libswconverter_la-swconvertor.lo [ 56s] CCAS libswconverter_la-csc_BGRA8888_to_RGBA8888_NEON.lo [ 56s] CCAS libswconverter_la-csc_BGRA8888_to_YUV420SP_NEON.lo [ 56s] CCAS libswconverter_la-csc_RGBA8888_to_YUV420SP_NEON.lo [ 56s] CCAS libswconverter_la-csc_interleave_memcpy_neon.lo [ 56s] CCAS libswconverter_la-csc_linear_to_tiled_crop_neon.lo [ 57s] CCAS libswconverter_la-csc_linear_to_tiled_interleave_crop_neon.lo [ 57s] CCAS libswconverter_la-csc_tiled_to_linear_crop_neon.lo [ 57s] CCAS libswconverter_la-csc_tiled_to_linear_deinterleave_crop_neon.lo [ 57s] CCAS libswconverter_la-csc_tiled_to_linear_uv_deinterleave_neon.lo [ 57s] CCAS libswconverter_la-csc_tiled_to_linear_uv_neon.lo [ 57s] CCAS libswconverter_la-csc_tiled_to_linear_y_neon.lo [ 57s] CCLD libswconverter.la [ 57s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 57s] Making all in libcsc [ 57s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 57s] CC libcsc_la-csc.lo [ 57s] CCLD libcsc.la [ 57s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 57s] Making all in libgscaler [ 57s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 57s] CXX libexynosgscaler_la-libgscaler_obj.lo [ 58s] CXX libexynosgscaler_la-libgscaler.lo [ 58s] CXXLD libexynosgscaler.la [ 58s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 58s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 58s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 58s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 58s] + exit 0 [ 58s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.3bQzsE [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd libexynos-common-0.0.1 [ 58s] + LANG=C [ 58s] + export LANG [ 58s] + unset DISPLAY [ 58s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm [ 58s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include/linux [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include/system [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/pkgconfig [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/libion/include/ion/ [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/libion/kernel-headers/linux [ 58s] + install -m0644 include/content_protect.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/csc.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/exynos_format.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/exynos_gscaler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/exynos_ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/exynos_log.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/exynos_scaler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/exynos_v4l2.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/media.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/swconverter.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include [ 58s] + install -m0644 include/linux/compiler.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include/linux [ 58s] + install -m0644 include/system/graphics.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/include/system [ 58s] + install -m0644 libion/include/ion/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/libion/include/ion/ [ 58s] + install -m0644 libion/kernel-headers/linux/ion.h /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/libion/kernel-headers/linux [ 58s] + install exynos-common.pc /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/pkgconfig/ [ 58s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm install [ 58s] Making install in libion [ 58s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 58s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 58s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 58s] /bin/sh ../libtool --mode=install /bin/install -c libion.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 58s] libtool: install: /bin/install -c .libs/libion.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libion.so.0.0.0 [ 58s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libion.so.0.0.0 libion.so.0 || { rm -f libion.so.0 && ln -s libion.so.0.0.0 libion.so.0; }; }) [ 58s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libion.so.0.0.0 libion.so || { rm -f libion.so && ln -s libion.so.0.0.0 libion.so; }; }) [ 59s] libtool: install: /bin/install -c .libs/libion.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libion.la [ 59s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 59s] make[2]: Nothing to be done for 'install-data-am'. [ 59s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 59s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libion' [ 59s] Making install in libv4l2 [ 59s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 59s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 59s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] /bin/sh ../libtool --mode=install /bin/install -c libexynosv4l2.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] libtool: install: /bin/install -c .libs/libexynosv4l2.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libexynosv4l2.so.0.0.0 [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libexynosv4l2.so.0.0.0 libexynosv4l2.so.0 || { rm -f libexynosv4l2.so.0 && ln -s libexynosv4l2.so.0.0.0 libexynosv4l2.so.0; }; }) [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libexynosv4l2.so.0.0.0 libexynosv4l2.so || { rm -f libexynosv4l2.so && ln -s libexynosv4l2.so.0.0.0 libexynosv4l2.so; }; }) [ 59s] libtool: install: /bin/install -c .libs/libexynosv4l2.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libexynosv4l2.la [ 59s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 59s] make[2]: Nothing to be done for 'install-data-am'. [ 59s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 59s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libv4l2' [ 59s] Making install in libswconverter [ 59s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 59s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 59s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] /bin/sh ../libtool --mode=install /bin/install -c libswconverter.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] libtool: install: /bin/install -c .libs/libswconverter.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libswconverter.so.0.0.0 [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libswconverter.so.0.0.0 libswconverter.so.0 || { rm -f libswconverter.so.0 && ln -s libswconverter.so.0.0.0 libswconverter.so.0; }; }) [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libswconverter.so.0.0.0 libswconverter.so || { rm -f libswconverter.so && ln -s libswconverter.so.0.0.0 libswconverter.so; }; }) [ 59s] libtool: install: /bin/install -c .libs/libswconverter.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libswconverter.la [ 59s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 59s] make[2]: Nothing to be done for 'install-data-am'. [ 59s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 59s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libswconverter' [ 59s] Making install in libcsc [ 59s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 59s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 59s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] /bin/sh ../libtool --mode=install /bin/install -c libcsc.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] libtool: install: warning: relinking `libcsc.la' [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc; /bin/sh /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -I../include -DLOG_TAG=\"LIBCSC\" -I/usr/include/dlog -DUSE_DLOG -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -mfpu=neon -DUSE_DLOG -DGST_EXT_TIME_ANALYSIS -L../libswconverter -Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed -o libcsc.la -rpath /usr/lib libcsc_la-csc.lo -lswconverter -ldlog -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm) [ 59s] libtool: install: /bin/install -c .libs/libcsc.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libcsc.so.0.0.0 [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libcsc.so.0.0.0 libcsc.so.0 || { rm -f libcsc.so.0 && ln -s libcsc.so.0.0.0 libcsc.so.0; }; }) [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libcsc.so.0.0.0 libcsc.so || { rm -f libcsc.so && ln -s libcsc.so.0.0.0 libcsc.so; }; }) [ 59s] libtool: install: /bin/install -c .libs/libcsc.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libcsc.la [ 59s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 59s] make[2]: Nothing to be done for 'install-data-am'. [ 59s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 59s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libcsc' [ 59s] Making install in libgscaler [ 59s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 59s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 59s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] /bin/sh ../libtool --mode=install /bin/install -c libexynosgscaler.la '/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib' [ 59s] libtool: install: warning: relinking `libexynosgscaler.la' [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler; /bin/sh /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libtool --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -DLOG_TAG=\"LIBEXYNOSGSCALER\" -I../include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11 -L../libcsc -Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed -o libexynosgscaler.la -rpath /usr/lib libexynosgscaler_la-libgscaler_obj.lo libexynosgscaler_la-libgscaler.lo -lcsc -ldlog -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm) [ 59s] libtool: install: /bin/install -c .libs/libexynosgscaler.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libexynosgscaler.so.0.0.0 [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libexynosgscaler.so.0.0.0 libexynosgscaler.so.0 || { rm -f libexynosgscaler.so.0 && ln -s libexynosgscaler.so.0.0.0 libexynosgscaler.so.0; }; }) [ 59s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib && { ln -s -f libexynosgscaler.so.0.0.0 libexynosgscaler.so || { rm -f libexynosgscaler.so && ln -s libexynosgscaler.so.0.0.0 libexynosgscaler.so; }; }) [ 59s] libtool: install: /bin/install -c .libs/libexynosgscaler.lai /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libexynosgscaler.la [ 59s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 59s] make[2]: Nothing to be done for 'install-data-am'. [ 59s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 59s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libgscaler' [ 59s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 59s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 59s] make[2]: Nothing to be done for 'install-exec-am'. [ 59s] make[2]: Nothing to be done for 'install-data-am'. [ 59s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 59s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1' [ 59s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/share/info/dir [ 59s] + find /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm -regex '.*\.la$' [ 59s] + xargs rm -f -- [ 59s] + find /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm -regex '.*\.a$' [ 59s] + xargs rm -f -- [ 59s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1 [ 59s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libcsc.so.0.0.0 [ 59s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libexynosgscaler.so.0.0.0 [ 60s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libexynosv4l2.so.0.0.0 [ 60s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libion.so.0.0.0 [ 60s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/lib/libswconverter.so.0.0.0 [ 60s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 60s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 60s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 60s] 985 blocks [ 60s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libexynos-common-debuginfo.manifest [ 60s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libexynos-common-0.0.1/libexynos-common-debugsource.manifest [ 60s] + /usr/lib/rpm/check-buildroot [ 60s] + /usr/lib/rpm//brp-compress [ 60s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 61s] + /usr/lib/rpm/brp-python-hardlink [ 61s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm [ 61s] Processing files: libexynos-common-0.0.1-7.2.armv7l [ 61s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 61s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 61s] [ 61s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.TvhWz0 [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd libexynos-common-0.0.1 [ 61s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/share/licenses/libexynos-common [ 61s] + export LICENSEDIR [ 61s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/share/licenses/libexynos-common [ 61s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm/usr/share/licenses/libexynos-common [ 61s] + exit 0 [ 61s] Provides: libcsc.so.0 libexynos-common = 0.0.1-7.2 libexynos-common(armv7l-32) = 0.0.1-7.2 libexynosgscaler.so.0 libexynosv4l2.so.0 libion.so.0 libswconverter.so.0 [ 61s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 61s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 61s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcsc.so.0 libdlog.so.0 libexynosgscaler.so.0 libexynosv4l2.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libion.so.0 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libswconverter.so.0 [ 61s] Processing files: libexynos-common-debugsource-0.0.1-7.2.armv7l [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: libexynos-common-debugsource = 0.0.1-7.2 libexynos-common-debugsource(armv7l-32) = 0.0.1-7.2 [ 61s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 61s] Processing files: libexynos-common-devel-0.0.1-7.2.armv7l [ 61s] Provides: libexynos-common-devel = 0.0.1-7.2 libexynos-common-devel(armv7l-32) = 0.0.1-7.2 pkgconfig(exynos-common) = @VERSION@ [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires: /usr/bin/pkg-config [ 61s] Processing files: libexynos-common-debuginfo-0.0.1-7.2.armv7l [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] warning: File listed twice: /usr/lib/debug/.build-id [ 61s] warning: File listed twice: /usr/lib/debug/.build-id [ 61s] warning: File listed twice: /usr/lib/debug/.build-id [ 61s] warning: File listed twice: /usr/lib/debug/.build-id [ 61s] Provides: libexynos-common-debuginfo = 0.0.1-7.2 libexynos-common-debuginfo(armv7l-32) = 0.0.1-7.2 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm [ 61s] warning: Could not canonicalize hostname: obsnw02 [ 61s] Wrote: /home/abuild/rpmbuild/SRPMS/libexynos-common-0.0.1-7.2.src.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-0.0.1-7.2.armv7l.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-debugsource-0.0.1-7.2.armv7l.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-devel-0.0.1-7.2.armv7l.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libexynos-common-debuginfo-0.0.1-7.2.armv7l.rpm [ 61s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.7GZKrh [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd libexynos-common-0.0.1 [ 61s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libexynos-common-0.0.1-7.2.arm [ 61s] + exit 0 [ 61s] ... checking for files with abuild user/group [ 61s] ... creating baselibs [ 62s] [ 62s] obsnw02 finished "build libexynos-common.spec" at Wed Mar 28 01:49:45 UTC 2018. [ 62s] Retried build at Thu Apr 5 06:44:30 2018 returned same result, skipped Retried build at Fri Apr 6 06:22:33 2018 returned same result, skipped Retried build at Fri Apr 6 20:31:17 2018 returned same result, skipped Retried build at Fri Apr 6 20:39:33 2018 returned same result, skipped Retried build at Mon Apr 9 12:42:39 2018 returned same result, skipped Retried build at Tue Apr 10 06:37:39 2018 returned same result, skipped Retried build at Wed Apr 11 07:07:45 2018 returned same result, skipped Retried build at Thu Apr 12 07:40:03 2018 returned same result, skipped Retried build at Sat Apr 14 02:52:39 2018 returned same result, skipped Retried build at Tue Apr 17 04:01:00 2018 returned same result, skipped Retried build at Tue Apr 17 17:43:05 2018 returned same result, skipped Retried build at Thu Apr 19 08:04:58 2018 returned same result, skipped Retried build at Fri Apr 20 08:42:05 2018 returned same result, skipped Retried build at Fri Apr 20 21:21:03 2018 returned same result, skipped Retried build at Fri Apr 20 21:40:32 2018 returned same result, skipped Retried build at Mon Apr 23 06:33:59 2018 returned same result, skipped Retried build at Tue Apr 24 08:44:08 2018 returned same result, skipped Retried build at Tue Apr 24 17:13:36 2018 returned same result, skipped Retried build at Thu Apr 26 06:36:31 2018 returned same result, skipped Retried build at Fri Apr 27 21:11:14 2018 returned same result, skipped Retried build at Mon Apr 30 07:23:47 2018 returned same result, skipped Retried build at Fri May 4 10:51:13 2018 returned same result, skipped Retried build at Fri May 11 08:18:45 2018 returned same result, skipped Retried build at Sat May 12 07:18:24 2018 returned same result, skipped Retried build at Sat May 12 20:54:11 2018 returned same result, skipped Retried build at Fri Jun 15 22:10:18 2018 returned same result, skipped Retried build at Fri Jun 15 22:14:03 2018 returned same result, skipped Retried build at Tue Jun 19 14:31:47 2018 returned same result, skipped Retried build at Mon Jun 25 07:33:16 2018 returned same result, skipped Retried build at Mon Jun 25 09:21:37 2018 returned same result, skipped Retried build at Fri Jun 29 06:19:15 2018 returned same result, skipped Retried build at Wed Jul 4 15:42:10 2018 returned same result, skipped Retried build at Thu Jul 5 08:24:34 2018 returned same result, skipped Retried build at Fri Jul 6 06:26:08 2018 returned same result, skipped Retried build at Fri Jul 6 18:39:33 2018 returned same result, skipped Retried build at Fri Jul 6 18:51:27 2018 returned same result, skipped Retried build at Fri Jul 13 16:03:40 2018 returned same result, skipped Retried build at Sat Jul 14 03:47:31 2018 returned same result, skipped Retried build at Tue Jul 17 06:32:59 2018 returned same result, skipped Retried build at Fri Jul 20 14:01:24 2018 returned same result, skipped Retried build at Fri Jul 20 14:15:53 2018 returned same result, skipped Retried build at Thu Aug 2 09:10:06 2018 returned same result, skipped Retried build at Fri Aug 10 06:42:33 2018 returned same result, skipped Retried build at Sat Aug 18 11:16:21 2018 returned same result, skipped Retried build at Mon Aug 27 07:18:08 2018 returned same result, skipped Retried build at Fri Aug 31 06:37:58 2018 returned same result, skipped Retried build at Tue Sep 4 06:37:54 2018 returned same result, skipped Retried build at Tue Sep 4 18:11:00 2018 returned same result, skipped