[ 0s] Memory limit set to 82441344KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw14 started "build _service:gbs:tayga.spec" at Fri Nov 23 06:36:18 UTC 2018. [ 0s] [ 0s] Building tayga for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '829729545db5bd9bbc1344631f6ddb06' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:tayga.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:tayga.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:tayga.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] interpreter for 'aarch64' is -1 [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling libncurses... [ 0s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libbz2... [ 1s] [12/40] preinstalling libcap... [ 1s] [13/40] preinstalling libelf... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [27/40] preinstalling coreutils... [ 6s] [28/40] preinstalling libacl... [ 6s] [29/40] preinstalling libblkid... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/96] installing libmagic-data-5.32-11.41 [ 7s] [2/96] installing setup-0.9-8.2 [ 7s] warning: /etc/profile created as /etc/profile.rpmnew [ 7s] [3/96] installing filesystem-3.1-8.1 [ 7s] [4/96] installing glibc-2.24-12.12 [ 8s] [5/96] installing libatomic-6.2.1-29.2 [ 8s] [6/96] installing libgcc-6.2.1-29.2 [ 8s] [7/96] installing bash-3.2.57-6.3 [ 8s] [8/96] installing binutils-2.27-12.5 [ 8s] [9/96] installing cpio-2.11-3.3 [ 8s] [10/96] installing diffutils-3.3-3.3 [ 8s] [11/96] installing findutils-4.3.8-5.314 [ 8s] [12/96] installing hostname-3.20-5.3 [ 8s] [13/96] installing libattr-2.4.47-5.173 [ 8s] [14/96] installing libbz2-1.0.6-4.362 [ 8s] [15/96] installing libcap-2.24-4.382 [ 8s] [16/96] installing libelf-0.153-3.136 [ 8s] [17/96] installing libext2fs-1.43.4-6.1 [ 8s] [18/96] installing libfreebl3-3.34.1-5.148 [ 8s] [19/96] installing libgomp-6.2.1-29.2 [ 9s] [20/96] installing libitm-6.2.1-29.2 [ 9s] [21/96] installing libltdl-2.4.2-4.319 [ 9s] [22/96] installing liblua-5.1.5-5.3 [ 9s] [23/96] installing liblzma-5.2.3-5.181 [ 9s] [24/96] installing libpcre-8.41-6.3 [ 9s] [25/96] installing libpopt-1.16-4.61 [ 9s] [26/96] installing libsmack-1.3.1-5.186 [ 9s] [27/96] installing libsmartcols-2.30-12.1 [ 9s] [28/96] installing libsqlite-3.24.0-12.7 [ 9s] [29/96] installing libstdc++-6.2.1-29.2 [ 9s] [30/96] installing libuuid-2.30-12.1 [ 9s] [31/96] installing m4-1.4.17-3.3 [ 9s] [32/96] installing net-tools-2.0_20121208git-3.1 [ 9s] [33/96] installing nspr-4.12-4.41 [ 9s] [34/96] installing patch-2.7-3.61 [ 9s] [35/96] installing pkg-config-0.28-5.325 [ 9s] [36/96] installing sed-4.1c-4.3 [ 9s] [37/96] installing update-alternatives-1.18.15-4.3 [ 9s] [38/96] installing which-2.20-6.3 [ 9s] [39/96] installing zlib-1.2.11-5.72 [ 9s] [40/96] installing build-compare-2015.04.28-3.162 [ 9s] [41/96] installing libstdc++-devel-6.2.1-29.2 [ 10s] [42/96] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 11s] [43/96] installing terminfo-base-full-6.1-10.53 [ 11s] [44/96] installing cpp-6.2.1-29.2 [ 11s] [45/96] installing gcc-c++-6.2.1-29.2 [ 12s] [46/96] installing coreutils-6.9-3.5 [ 12s] [47/96] installing db4-4.8.30.NC-3.373 [ 12s] [48/96] installing gawk-3.1.5-5.4 [ 12s] [49/96] installing grep-2.5.2-6.3 [ 12s] [50/96] installing libacl-2.2.52-5.193 [ 12s] [51/96] installing libasm-0.153-3.136 [ 12s] [52/96] installing libblkid-2.30-12.1 [ 13s] [53/96] installing libcc1-6.2.1-29.2 [ 13s] [54/96] installing libgfortran-6.2.1-29.2 [ 13s] [55/96] installing libubsan-6.2.1-29.2 [ 13s] [56/96] installing make-4.0-4.51 [ 13s] [57/96] installing nss-certs-3.34.1-5.148 [ 13s] [58/96] installing smack-1.3.1-5.186 [ 13s] [59/96] installing bzip2-1.0.6-4.362 [ 13s] [60/96] installing libmagic-5.32-11.41 [ 13s] [61/96] installing libxml2-2.9.7-6.157 [ 13s] [62/96] installing xz-5.2.3-5.181 [ 13s] [63/96] installing libdw-0.153-3.136 [ 13s] [64/96] installing linux-glibc-devel-3.10-4.16 [ 13s] [65/96] installing file-5.32-11.41 [ 13s] [66/96] installing glibc-locale-2.24-12.12 [ 14s] [67/96] installing libmount-2.30-12.1 [ 14s] [68/96] installing tar-1.17-4.3 [ 14s] [69/96] installing tizen-platform-config-5.0-12.4 [ 14s] [70/96] installing gzip-1.3.12-7.152 [ 14s] [71/96] installing libfdisk-2.30-12.1 [ 14s] [72/96] installing libncurses6-6.1-10.53 [ 15s] [73/96] installing pam-1.1.6-7.1 [ 15s] [74/96] installing perl-5.20.0-6.39 [ 16s] [75/96] installing tzdata-2018f-9.2 [ 16s] [76/96] installing elfutils-0.153-3.136 [ 16s] [77/96] installing gcc-6.2.1-29.2 [ 17s] [78/96] installing build-mkbaselibs-20120927-3.1 [ 17s] [79/96] installing libncurses-6.1-10.53 [ 17s] [80/96] installing glibc-devel-2.24-12.12 [ 17s] [81/96] installing qemu-accel-x86_64-armv7l-0.4-13.10 [ 23s] [82/96] installing autoconf-2.69-5.80 [ 24s] [83/96] installing less-466-8.8 [ 24s] [84/96] installing libreadline-5.2-4.127 [ 24s] [85/96] installing libtzplatform-config-5.0-12.4 [ 24s] [86/96] installing procps-ng-3.3.15-8.3 [ 24s] [87/96] installing libtzplatform-config-devel-5.0-12.4 [ 24s] [88/96] installing automake-1.15.1-6.131 [ 24s] [89/96] installing build-20120927-3.1 [ 24s] [90/96] installing util-linux-2.30-12.1 [ 24s] [91/96] installing libtool-2.4.2-4.319 [ 24s] [92/96] installing util-linux-su-2.30-12.1 [ 24s] [93/96] installing nss-3.34.1-5.148 [ 24s] [94/96] installing libsoftokn3-3.34.1-5.148 [ 24s] [95/96] installing rpm-4.11.0.1-10.10 [ 25s] [96/96] installing rpm-build-4.11.0.1-10.10 [ 25s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 25s] now finalizing build dir... [ 26s] build target is armv7l-tizen-linux [ 26s] ----------------------------------------------------------------- [ 26s] I have the following modifications for tayga.spec: [ 26s] 5c5 [ 26s] < Release: 1 [ 26s] --- [ 26s] > Release: 4.9 [ 26s] ----------------------------------------------------------------- [ 26s] ----- building tayga.spec (user abuild) [ 26s] ----------------------------------------------------------------- [ 26s] ----------------------------------------------------------------- [ 26s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/829729545db5bd9bbc1344631f6ddb06-tayga' -ba /home/abuild/rpmbuild/SOURCES/tayga.spec [ 26s] error: Error parsing tag field: missing argument [ 26s] error: Error parsing tag field: missing argument [ 26s] Building target platforms: armv7l-tizen-linux [ 26s] Building for target armv7l-tizen-linux [ 26s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.E8to9r [ 26s] + umask 022 [ 26s] + cd /home/abuild/rpmbuild/BUILD [ 26s] + cd /home/abuild/rpmbuild/BUILD [ 26s] + rm -rf tayga-0.9.2 [ 26s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/tayga-0.9.2.tar.gz [ 26s] + /bin/tar -xf - [ 26s] + STATUS=0 [ 26s] + '[' 0 -ne 0 ']' [ 26s] + cd tayga-0.9.2 [ 26s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 26s] + echo 'Patch #0 (2b8b56f-to-9aa36c4.diff):' [ 26s] Patch #0 (2b8b56f-to-9aa36c4.diff): [ 26s] + /bin/cat /home/abuild/rpmbuild/SOURCES/2b8b56f-to-9aa36c4.diff [ 26s] + /bin/patch -p1 --fuzz=2 [ 26s] patching file tayga.manifest [ 26s] + echo 'Patch #1 (0002-Installed-config-file-for-NAT64.patch):' [ 26s] Patch #1 (0002-Installed-config-file-for-NAT64.patch): [ 26s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Installed-config-file-for-NAT64.patch [ 26s] + /bin/patch -p1 --fuzz=2 [ 26s] patching file tayga.conf [ 26s] + echo 'Patch #2 (0003-Updated-tayga.conf-file.patch):' [ 26s] Patch #2 (0003-Updated-tayga.conf-file.patch): [ 26s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Updated-tayga.conf-file.patch [ 26s] + /bin/patch -p1 --fuzz=2 [ 26s] patching file tayga.conf [ 26s] + echo 'Patch #3 (0004-Apply-ASLR.patch):' [ 26s] Patch #3 (0004-Apply-ASLR.patch): [ 26s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0004-Apply-ASLR.patch [ 26s] + /bin/patch -p1 --fuzz=2 [ 26s] patching file configure.ac [ 26s] + exit 0 [ 26s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lHDpMv [ 26s] + umask 022 [ 26s] + cd /home/abuild/rpmbuild/BUILD [ 26s] + cd tayga-0.9.2 [ 26s] ++ uname -m [ 26s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 26s] + LANG=C [ 26s] + export LANG [ 26s] + unset DISPLAY [ 26s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 26s] + export CFLAGS [ 26s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 26s] + export CXXFLAGS [ 26s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 26s] + export FFLAGS [ 26s] + LDFLAGS= [ 26s] + export LDFLAGS [ 26s] + ./configure [ 26s] checking for a BSD-compatible install... /bin/install -c [ 27s] checking whether build environment is sane... yes [ 27s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 27s] checking for gawk... gawk [ 27s] checking whether make sets $(MAKE)... yes [ 27s] checking for gcc... gcc [ 27s] checking whether the C compiler works... yes [ 27s] checking for C compiler default output file name... a.out [ 27s] checking for suffix of executables... [ 27s] checking whether we are cross compiling... no [ 27s] checking for suffix of object files... o [ 27s] checking whether we are using the GNU C compiler... yes [ 27s] checking whether gcc accepts -g... yes [ 27s] checking for gcc option to accept ISO C89... none needed [ 27s] checking for style of include used by make... GNU [ 28s] checking dependency style of gcc... gcc3 [ 28s] configure: creating ./config.status [ 28s] config.status: creating Makefile [ 28s] config.status: creating config.h [ 28s] config.status: executing depfiles commands [ 28s] + make -j4 [ 28s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/tayga-0.9.2/missing --run aclocal-1.11 [ 28s] /home/abuild/rpmbuild/BUILD/tayga-0.9.2/missing: line 52: aclocal-1.11: command not found [ 28s] WARNING: `aclocal-1.11' is missing on your system. You should only need it if [ 28s] you modified `acinclude.m4' or `configure.ac'. You might want [ 28s] to install the `Automake' and `Perl' packages. Grab them from [ 28s] any GNU archive site. [ 28s] CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/tayga-0.9.2/missing --run autoconf [ 28s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/tayga-0.9.2/missing --run automake-1.11 --foreign [ 28s] /home/abuild/rpmbuild/BUILD/tayga-0.9.2/missing: line 52: automake-1.11: command not found [ 28s] WARNING: `automake-1.11' is missing on your system. You should only need it if [ 28s] you modified `Makefile.am', `acinclude.m4' or `configure.ac'. [ 28s] You might want to install the `Automake' and `Perl' packages. [ 28s] Grab them from any GNU archive site. [ 29s] aclocal.m4:16: warning: this file was generated for autoconf 2.65. [ 29s] You have another version of autoconf. It may work, but is not guaranteed to. [ 29s] If you have problems, you may need to regenerate the build system entirely. [ 29s] To do so, use the procedure documented by the package, typically `autoreconf'. [ 30s] /bin/sh ./config.status --recheck [ 30s] running CONFIG_SHELL=/bin/sh /bin/sh ./configure CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g LDFLAGS= --no-create --no-recursion [ 30s] checking for a BSD-compatible install... /bin/install -c [ 31s] checking whether build environment is sane... yes [ 31s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 31s] checking for gawk... gawk [ 31s] checking whether make sets $(MAKE)... yes [ 31s] checking for gcc... gcc [ 31s] checking whether the C compiler works... yes [ 31s] checking for C compiler default output file name... a.out [ 31s] checking for suffix of executables... [ 31s] checking whether we are cross compiling... no [ 31s] checking for suffix of object files... o [ 31s] checking whether we are using the GNU C compiler... yes [ 31s] checking whether gcc accepts -g... yes [ 31s] checking for gcc option to accept ISO C89... none needed [ 31s] checking for style of include used by make... GNU [ 31s] checking dependency style of gcc... gcc3 [ 31s] configure: creating ./config.status [ 32s] /bin/sh ./config.status [ 32s] config.status: creating Makefile [ 32s] config.status: creating config.h [ 32s] config.status: config.h is unchanged [ 32s] config.status: executing depfiles commands [ 32s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/tayga-0.9.2/missing --run autoheader) [ 33s] rm -f stamp-h1 [ 33s] touch config.h.in [ 33s] cd . && /bin/sh ./config.status config.h [ 34s] config.status: creating config.h [ 34s] config.status: config.h is unchanged [ 34s] make all-am [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/tayga-0.9.2' [ 34s] gcc -DTAYGA_CONF_PATH=\"/usr/local/etc/tayga.conf\" -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -Wall -fPIE -MT nat64.o -MD -MP -MF .deps/nat64.Tpo -c -o nat64.o nat64.c [ 34s] gcc -DTAYGA_CONF_PATH=\"/usr/local/etc/tayga.conf\" -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -Wall -fPIE -MT addrmap.o -MD -MP -MF .deps/addrmap.Tpo -c -o addrmap.o addrmap.c [ 34s] gcc -DTAYGA_CONF_PATH=\"/usr/local/etc/tayga.conf\" -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -Wall -fPIE -MT dynamic.o -MD -MP -MF .deps/dynamic.Tpo -c -o dynamic.o dynamic.c [ 34s] gcc -DTAYGA_CONF_PATH=\"/usr/local/etc/tayga.conf\" -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -Wall -fPIE -MT tayga.o -MD -MP -MF .deps/tayga.Tpo -c -o tayga.o tayga.c [ 34s] tayga.c: In function 'main': [ 34s] tayga.c:391:3: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result] [ 34s] chdir("/"); [ 34s] ^~~~~~~~~~ [ 34s] tayga.c:438:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 34s] write(pidfd, addrbuf, strlen(addrbuf)); [ 34s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 34s] tayga.c:463:3: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result] [ 34s] chdir("/"); [ 34s] ^~~~~~~~~~ [ 34s] tayga.c: In function 'signal_handler': [ 34s] tayga.c:167:2: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 34s] write(signalfds[1], &signal, sizeof(signal)); [ 34s] ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 34s] addrmap.c: In function 'map_ip4_to_ip6': [ 34s] addrmap.c:444:5: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 34s] c = cache_insert(addr4, addr6, hash, hash_ip6(addr6)); [ 34s] ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 34s] addrmap.c: In function 'map_ip6_to_ip4': [ 34s] addrmap.c:589:5: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 34s] c = cache_insert(addr4, addr6, hash_ip4(addr4), hash); [ 34s] ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 34s] mv -f .deps/dynamic.Tpo .deps/dynamic.Po [ 34s] gcc -DTAYGA_CONF_PATH=\"/usr/local/etc/tayga.conf\" -I. -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -Wall -fPIE -MT conffile.o -MD -MP -MF .deps/conffile.Tpo -c -o conffile.o conffile.c [ 34s] mv -f .deps/tayga.Tpo .deps/tayga.Po [ 34s] mv -f .deps/addrmap.Tpo .deps/addrmap.Po [ 34s] mv -f .deps/conffile.Tpo .deps/conffile.Po [ 34s] mv -f .deps/nat64.Tpo .deps/nat64.Po [ 34s] gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -g -Wall -fPIE -pie -o tayga nat64.o addrmap.o dynamic.o tayga.o conffile.o [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/tayga-0.9.2' [ 34s] + exit 0 [ 34s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.RmBggZ [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd tayga-0.9.2 [ 34s] + LANG=C [ 34s] + export LANG [ 34s] + unset DISPLAY [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/usr/sbin [ 34s] + cp tayga /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/usr/sbin/tayga [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/opt/etc/tayga/ [ 34s] + cp tayga.conf /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/opt/etc/tayga/tayga.conf [ 34s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/tayga-0.9.2 [ 34s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/usr/sbin/tayga [ 34s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 34s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 34s] 171 blocks [ 34s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/tayga-0.9.2/tayga-debuginfo.manifest [ 34s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/tayga-0.9.2/tayga-debugsource.manifest [ 34s] + /usr/lib/rpm/check-buildroot [ 34s] + /usr/lib/rpm//brp-compress [ 34s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 34s] + /usr/lib/rpm/brp-python-hardlink [ 34s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm [ 34s] Processing files: tayga-0.9.2-4.9.armv7l [ 34s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 34s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 34s] [ 34s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.2x45au [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd tayga-0.9.2 [ 34s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/usr/share/licenses/tayga [ 34s] + export LICENSEDIR [ 34s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/usr/share/licenses/tayga [ 34s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm/usr/share/licenses/tayga [ 34s] + exit 0 [ 34s] Provides: tayga = 0.9.2-4.9 tayga(armv7l-32) = 0.9.2-4.9 [ 34s] Requires(interp): /bin/sh [ 34s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 34s] Requires(post): /bin/sh [ 34s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 34s] Processing files: tayga-debugsource-0.9.2-4.9.armv7l [ 34s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 34s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 34s] [ 34s] Provides: tayga-debugsource = 0.9.2-4.9 tayga-debugsource(armv7l-32) = 0.9.2-4.9 [ 34s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 34s] Processing files: tayga-debuginfo-0.9.2-4.9.armv7l [ 34s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 34s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 34s] [ 34s] Provides: tayga-debuginfo = 0.9.2-4.9 tayga-debuginfo(armv7l-32) = 0.9.2-4.9 [ 34s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 34s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm [ 34s] warning: Could not canonicalize hostname: obsnw14 [ 34s] Wrote: /home/abuild/rpmbuild/SRPMS/tayga-0.9.2-4.9.src.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/tayga-0.9.2-4.9.armv7l.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/tayga-debugsource-0.9.2-4.9.armv7l.rpm [ 35s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/tayga-debuginfo-0.9.2-4.9.armv7l.rpm [ 35s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.4eCAl1 [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd tayga-0.9.2 [ 35s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/tayga-0.9.2-4.9.arm [ 35s] + exit 0 [ 35s] ... checking for files with abuild user/group [ 35s] ... creating baselibs [ 35s] [ 35s] obsnw14 finished "build tayga.spec" at Fri Nov 23 06:36:53 UTC 2018. [ 35s] Retried build at Sat Nov 24 04:51:54 2018 returned same result, skipped Retried build at Fri Nov 30 21:19:59 2018 returned same result, skipped Retried build at Fri Dec 14 18:26:06 2018 returned same result, skipped Retried build at Fri Dec 21 20:45:51 2018 returned same result, skipped Retried build at Fri Jan 11 08:34:28 2019 returned same result, skipped Retried build at Fri Jan 18 09:47:40 2019 returned same result, skipped Retried build at Fri Feb 1 08:30:25 2019 returned same result, skipped Retried build at Fri Feb 8 08:47:14 2019 returned same result, skipped Retried build at Fri Feb 15 13:12:42 2019 returned same result, skipped Retried build at Fri Mar 8 11:40:29 2019 returned same result, skipped Retried build at Sat Mar 16 16:57:52 2019 returned same result, skipped Retried build at Mon Mar 25 00:49:24 2019 returned same result, skipped Retried build at Tue Apr 2 11:42:02 2019 returned same result, skipped Retried build at Mon Apr 8 02:57:56 2019 returned same result, skipped Retried build at Fri Apr 12 15:03:29 2019 returned same result, skipped