[ 0s] Memory limit set to 87946512KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw26 started "build _service:gbs:cryptsetup.spec" at Fri Nov 23 07:25:34 UTC 2018. [ 0s] [ 0s] Building cryptsetup for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '2c44abb633f600e527805ed0eb179030' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:cryptsetup.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:cryptsetup.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:cryptsetup.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] interpreter for 'aarch64' is -1 [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling libgcc... [ 2s] [7/40] preinstalling bash... [ 2s] [8/40] preinstalling diffutils... [ 2s] [9/40] preinstalling grep... [ 2s] [10/40] preinstalling libattr... [ 2s] [11/40] preinstalling libbz2... [ 2s] [12/40] preinstalling libcap... [ 2s] [13/40] preinstalling libelf... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 9s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [27/40] preinstalling coreutils... [ 10s] [28/40] preinstalling libacl... [ 10s] [29/40] preinstalling libblkid... [ 10s] [30/40] preinstalling smack... [ 10s] [31/40] preinstalling bzip2... [ 10s] [32/40] preinstalling libmagic... [ 10s] [33/40] preinstalling libxml2... [ 10s] [34/40] preinstalling libmount... [ 10s] [35/40] preinstalling tar... [ 10s] [36/40] preinstalling util-linux... [ 11s] [37/40] preinstalling util-linux-su... [ 11s] [38/40] preinstalling nss... [ 11s] [39/40] preinstalling libsoftokn3... [ 11s] [40/40] preinstalling rpm... [ 11s] [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-armv7l postinstall script [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 12s] [1/109] installing libmagic-data-5.32-11.41 [ 12s] [2/109] installing setup-0.9-8.2 [ 12s] warning: /etc/profile created as /etc/profile.rpmnew [ 12s] [3/109] installing filesystem-3.1-8.1 [ 12s] [4/109] installing glibc-2.24-12.12 [ 12s] [5/109] installing libatomic-6.2.1-29.2 [ 12s] [6/109] installing libgcc-6.2.1-29.2 [ 12s] [7/109] installing bash-3.2.57-6.3 [ 12s] [8/109] installing binutils-2.27-12.5 [ 13s] [9/109] installing cpio-2.11-3.3 [ 13s] [10/109] installing diffutils-3.3-3.3 [ 13s] [11/109] installing findutils-4.3.8-5.314 [ 13s] [12/109] installing hostname-3.20-5.3 [ 13s] [13/109] installing libattr-2.4.47-5.173 [ 13s] [14/109] installing libbz2-1.0.6-4.362 [ 13s] [15/109] installing libcap-2.24-4.382 [ 13s] [16/109] installing libelf-0.153-3.136 [ 13s] [17/109] installing libext2fs-1.43.4-6.1 [ 13s] [18/109] installing libfreebl3-3.34.1-5.148 [ 13s] [19/109] installing libgomp-6.2.1-29.2 [ 14s] [20/109] installing libgpg-error-1.27-5.3 [ 14s] [21/109] installing libitm-6.2.1-29.2 [ 14s] [22/109] installing libltdl-2.4.2-4.319 [ 14s] [23/109] installing liblua-5.1.5-5.3 [ 14s] [24/109] installing liblzma-5.2.3-5.181 [ 14s] [25/109] installing libpcre-8.41-6.3 [ 14s] [26/109] installing libpopt-1.16-4.61 [ 14s] [27/109] installing libsmack-1.3.1-5.186 [ 14s] [28/109] installing libsmartcols-2.30-12.1 [ 14s] [29/109] installing libsqlite-3.24.0-12.7 [ 14s] [30/109] installing libstdc++-6.2.1-29.2 [ 14s] [31/109] installing libuuid-2.30-12.1 [ 15s] [32/109] installing m4-1.4.17-3.3 [ 15s] [33/109] installing net-tools-2.0_20121208git-3.1 [ 15s] [34/109] installing nspr-4.12-4.41 [ 15s] [35/109] installing patch-2.7-3.61 [ 15s] [36/109] installing pkg-config-0.28-5.325 [ 15s] [37/109] installing sed-4.1c-4.3 [ 15s] [38/109] installing update-alternatives-1.18.15-4.3 [ 15s] [39/109] installing which-2.20-6.3 [ 15s] [40/109] installing zlib-1.2.11-5.72 [ 15s] [41/109] installing shadow-utils-4.1.4.2-9.3 [ 15s] [42/109] installing build-compare-2015.04.28-3.162 [ 15s] [43/109] installing libstdc++-devel-6.2.1-29.2 [ 15s] [44/109] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 16s] [45/109] installing terminfo-base-full-6.1-10.53 [ 17s] [46/109] installing cpp-6.2.1-29.2 [ 17s] [47/109] installing gcc-c++-6.2.1-29.2 [ 18s] [48/109] installing libuuid-devel-2.30-12.1 [ 18s] [49/109] installing popt-devel-1.16-4.61 [ 18s] [50/109] installing coreutils-6.9-3.5 [ 18s] [51/109] installing db4-4.8.30.NC-3.373 [ 18s] [52/109] installing gawk-3.1.5-5.4 [ 18s] [53/109] installing grep-2.5.2-6.3 [ 18s] [54/109] installing libacl-2.2.52-5.193 [ 18s] [55/109] installing libasm-0.153-3.136 [ 18s] [56/109] installing libblkid-2.30-12.1 [ 19s] [57/109] installing libcc1-6.2.1-29.2 [ 19s] [58/109] installing libgcrypt-1.8.3-7.3 [ 19s] [59/109] installing libgfortran-6.2.1-29.2 [ 19s] [60/109] installing libubsan-6.2.1-29.2 [ 19s] [61/109] installing make-4.0-4.51 [ 19s] [62/109] installing nss-certs-3.34.1-5.148 [ 19s] [63/109] installing smack-1.3.1-5.186 [ 19s] [64/109] installing bzip2-1.0.6-4.362 [ 19s] [65/109] installing gettext-runtime-0.19.8.1-4.85 [ 19s] [66/109] installing libkmod-25-4.5 [ 19s] [67/109] installing libmagic-5.32-11.41 [ 19s] [68/109] installing libxml2-2.9.7-6.157 [ 19s] [69/109] installing xz-5.2.3-5.181 [ 20s] [70/109] installing libdw-0.153-3.136 [ 20s] [71/109] installing linux-glibc-devel-3.10-4.16 [ 20s] [72/109] installing file-5.32-11.41 [ 20s] [73/109] installing glibc-locale-2.24-12.12 [ 20s] [74/109] installing libmount-2.30-12.1 [ 20s] [75/109] installing tar-1.17-4.3 [ 20s] [76/109] installing gettext-tools-0.19.8.1-4.85 [ 21s] [77/109] installing gzip-1.3.12-7.152 [ 21s] [78/109] installing libfdisk-2.30-12.1 [ 21s] [79/109] installing libncurses6-6.1-10.53 [ 21s] [80/109] installing pam-1.1.6-7.1 [ 21s] [81/109] installing perl-5.20.0-6.39 [ 23s] [82/109] installing tzdata-2018f-9.2 [ 23s] [83/109] installing elfutils-0.153-3.136 [ 23s] [84/109] installing gcc-6.2.1-29.2 [ 24s] [85/109] installing build-mkbaselibs-20120927-3.1 [ 24s] [86/109] installing libncurses-6.1-10.53 [ 24s] [87/109] installing glibc-devel-2.24-12.12 [ 24s] [88/109] installing qemu-accel-x86_64-armv7l-0.4-13.10 [ 32s] [89/109] installing autoconf-2.69-5.80 [ 32s] [90/109] installing less-466-8.8 [ 32s] [91/109] installing libreadline-5.2-4.127 [ 32s] [92/109] installing procps-ng-3.3.15-8.3 [ 32s] [93/109] installing libsystemd-231-32.2 [ 32s] [94/109] installing systemd-231-32.2 [ 34s] [95/109] installing automake-1.15.1-6.131 [ 34s] [96/109] installing libdevmapper-1.02.77-6.4 [ 34s] [97/109] installing systemd-devel-231-32.2 [ 34s] [98/109] installing build-20120927-3.1 [ 34s] [99/109] installing libgpg-error-devel-1.27-5.3 [ 34s] [100/109] installing util-linux-2.30-12.1 [ 34s] [101/109] installing device-mapper-1.02.77-6.4 [ 34s] [102/109] installing libtool-2.4.2-4.319 [ 34s] [103/109] installing util-linux-su-2.30-12.1 [ 35s] [104/109] installing libgcrypt-devel-1.8.3-7.3 [ 35s] [105/109] installing device-mapper-devel-1.02.77-6.4 [ 35s] [106/109] installing nss-3.34.1-5.148 [ 35s] [107/109] installing libsoftokn3-3.34.1-5.148 [ 35s] [108/109] installing rpm-4.11.0.1-10.10 [ 35s] [109/109] installing rpm-build-4.11.0.1-10.10 [ 35s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 35s] now finalizing build dir... [ 36s] build target is armv7l-tizen-linux [ 36s] ----------------------------------------------------------------- [ 36s] I have the following modifications for cryptsetup.spec: [ 36s] 5c5 [ 36s] < Release: 1 [ 36s] --- [ 36s] > Release: 5.9 [ 36s] 24c24 [ 36s] < BuildRequires: gettext [ 36s] --- [ 36s] > BuildRequires: gettext-tools [ 36s] ----------------------------------------------------------------- [ 36s] ----- building cryptsetup.spec (user abuild) [ 36s] ----------------------------------------------------------------- [ 36s] ----------------------------------------------------------------- [ 36s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/2c44abb633f600e527805ed0eb179030-cryptsetup' -ba /home/abuild/rpmbuild/SOURCES/cryptsetup.spec [ 36s] error: Error parsing tag field: missing argument [ 36s] error: Error parsing tag field: missing argument [ 36s] error: Error parsing tag field: missing argument [ 36s] error: Error parsing tag field: missing argument [ 36s] error: Error parsing tag field: missing argument [ 36s] Building target platforms: armv7l-tizen-linux [ 36s] Building for target armv7l-tizen-linux [ 36s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.1dHHcs [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + rm -rf cryptsetup-1.6.7 [ 36s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/cryptsetup-1.6.7.tar.xz [ 36s] + /bin/tar -xf - [ 37s] + STATUS=0 [ 37s] + '[' 0 -ne 0 ']' [ 37s] + cd cryptsetup-1.6.7 [ 37s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 37s] + echo 'Patch #0 (4c6390a-to-064b272.diff):' [ 37s] Patch #0 (4c6390a-to-064b272.diff): [ 37s] + /bin/cat /home/abuild/rpmbuild/SOURCES/4c6390a-to-064b272.diff [ 37s] + /bin/patch -p1 --fuzz=2 [ 37s] patching file autogen.sh [ 37s] + echo 'Patch #1 (0002-Enable-ASLR-feature.patch):' [ 37s] Patch #1 (0002-Enable-ASLR-feature.patch): [ 37s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0002-Enable-ASLR-feature.patch [ 37s] + /bin/patch -p1 --fuzz=2 [ 37s] patching file src/Makefile.am [ 37s] patching file src/Makefile.in [ 37s] + echo 'Patch #2 (0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch):' [ 37s] Patch #2 (0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch): [ 37s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0003-Add-dependency-to-the-device-mapper-package-and-Lice.patch [ 37s] + /bin/patch -p1 --fuzz=2 [ 37s] patching file COPYING.GPL-2.0+ (renamed from COPYING) [ 37s] patching file COPYING.LGPL-2.1+ (renamed from COPYING.LGPL) [ 37s] + exit 0 [ 37s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0MTFqD [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd cryptsetup-1.6.7 [ 37s] ++ uname -m [ 37s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 37s] + LANG=C [ 37s] + export LANG [ 37s] + unset DISPLAY [ 37s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 37s] + export CFLAGS [ 37s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 37s] + export CXXFLAGS [ 37s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 37s] + export FFLAGS [ 37s] + LDFLAGS= [ 37s] + export LDFLAGS [ 37s] + chmod +x ./autogen.sh [ 37s] + ./autogen.sh --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib [ 39s] [ 39s] Generate build-system by: [ 39s] autopoint: /usr/bin/autopoint (GNU gettext-tools) 0.19.8.1 [ 40s] aclocal: aclocal (GNU automake) 1.15.1 [ 40s] autoconf: autoconf (GNU Autoconf) 2.69 [ 41s] automake: automake (GNU automake) 1.15.1 [ 41s] libtoolize: libtoolize (GNU libtool) 2.4.2 [ 41s] [ 49s] Copying file m4/codeset.m4 [ 50s] Copying file m4/glibc2.m4 [ 50s] Copying file m4/glibc21.m4 [ 50s] Copying file m4/intdiv0.m4 [ 50s] Copying file m4/intmax.m4 [ 50s] Copying file m4/inttypes-h.m4 [ 50s] Copying file m4/inttypes-pri.m4 [ 50s] Copying file m4/inttypes_h.m4 [ 50s] Copying file m4/lcmessage.m4 [ 50s] Copying file m4/lock.m4 [ 50s] Copying file m4/longdouble.m4 [ 50s] Copying file m4/longlong.m4 [ 50s] Copying file m4/printf-posix.m4 [ 50s] Copying file m4/signed.m4 [ 50s] Copying file m4/size_max.m4 [ 50s] Copying file m4/stdint_h.m4 [ 50s] Copying file m4/uintmax_t.m4 [ 50s] Copying file m4/ulonglong.m4 [ 50s] Copying file m4/visibility.m4 [ 50s] Copying file m4/wchar_t.m4 [ 50s] Copying file m4/wint_t.m4 [ 50s] Copying file m4/xsize.m4 [ 50s] Copying file po/Makevars.template [ 51s] libtoolize: putting auxiliary files in `.'. [ 51s] libtoolize: copying file `./ltmain.sh' [ 51s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 51s] libtoolize: copying file `m4/libtool.m4' [ 51s] libtoolize: copying file `m4/ltoptions.m4' [ 51s] libtoolize: copying file `m4/ltsugar.m4' [ 51s] libtoolize: copying file `m4/ltversion.m4' [ 51s] libtoolize: copying file `m4/lt~obsolete.m4' [ 73s] configure.ac:67: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 73s] configure.ac:67: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 73s] configure.ac:67: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 73s] Makefile.am: installing './COPYING' using GNU General Public License v3 file [ 73s] Makefile.am: Consider adding the COPYING file to the version control system [ 73s] Makefile.am: for your code, to avoid questions about which license your project uses [ 78s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 78s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 78s] automake: warning: possible forward-incompatibility. [ 78s] automake: At least a source file is in a subdirectory, but the 'subdir-objects' [ 78s] automake: automake option hasn't been enabled. For now, the corresponding output [ 78s] automake: object file(s) will be placed in the top-level directory. However, [ 78s] automake: this behaviour will change in future Automake versions: they will [ 78s] automake: unconditionally cause object files to be placed in the same subdirectory [ 78s] automake: of the corresponding sources. [ 78s] automake: You are advised to start using 'subdir-objects' option throughout your [ 78s] automake: project, to avoid future incompatibilities. [ 78s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 78s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 78s] src/Makefile.am:12: warning: source file '$(top_builddir)/lib/utils_fips.c' is in a subdirectory, [ 78s] src/Makefile.am:12: but option 'subdir-objects' is disabled [ 78s] src/Makefile.am:76: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 78s] src/Makefile.am:76: but option 'subdir-objects' is disabled [ 78s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_crypt.c' is in a subdirectory, [ 78s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 78s] src/Makefile.am:46: warning: source file '$(top_builddir)/lib/utils_loop.c' is in a subdirectory, [ 78s] src/Makefile.am:46: but option 'subdir-objects' is disabled [ 80s] tests/Makefile.am:44: warning: source file '$(top_srcdir)/lib/utils_loop.c' is in a subdirectory, [ 80s] tests/Makefile.am:44: but option 'subdir-objects' is disabled [ 85s] Running ./configure --prefix=/usr -localedir=/usr/share/locale -libdir=/usr/lib ... [ 86s] checking whether make supports nested variables... yes [ 86s] checking for a BSD-compatible install... /usr/bin/install -c [ 86s] checking whether build environment is sane... yes [ 86s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 86s] checking for gawk... gawk [ 86s] checking whether make sets $(MAKE)... yes [ 86s] checking build system type... armv7l-unknown-linux-gnueabi [ 86s] checking host system type... armv7l-unknown-linux-gnueabi [ 86s] checking for style of include used by make... GNU [ 86s] checking for gcc... gcc [ 86s] checking whether the C compiler works... yes [ 86s] checking for C compiler default output file name... a.out [ 86s] checking for suffix of executables... [ 86s] checking whether we are cross compiling... no [ 86s] checking for suffix of object files... o [ 86s] checking whether we are using the GNU C compiler... yes [ 86s] checking whether gcc accepts -g... yes [ 86s] checking for gcc option to accept ISO C89... none needed [ 86s] checking whether gcc understands -c and -o together... yes [ 86s] checking dependency style of gcc... gcc3 [ 86s] checking how to run the C preprocessor... gcc -E [ 86s] checking for grep that handles long lines and -e... /usr/bin/grep [ 86s] checking for egrep... /usr/bin/grep -E [ 86s] checking for ANSI C header files... yes [ 86s] checking for sys/types.h... yes [ 87s] checking for sys/stat.h... yes [ 87s] checking for stdlib.h... yes [ 87s] checking for string.h... yes [ 87s] checking for memory.h... yes [ 87s] checking for strings.h... yes [ 87s] checking for inttypes.h... yes [ 87s] checking for stdint.h... yes [ 87s] checking for unistd.h... yes [ 87s] checking minix/config.h usability... no [ 87s] checking minix/config.h presence... no [ 87s] checking for minix/config.h... no [ 87s] checking whether it is safe to define __EXTENSIONS__... yes [ 87s] checking for gcc... (cached) gcc [ 87s] checking whether we are using the GNU C compiler... (cached) yes [ 87s] checking whether gcc accepts -g... (cached) yes [ 87s] checking for gcc option to accept ISO C89... (cached) none needed [ 87s] checking whether gcc understands -c and -o together... (cached) yes [ 87s] checking dependency style of gcc... (cached) gcc3 [ 87s] checking how to run the C preprocessor... gcc -E [ 87s] checking whether make sets $(MAKE)... (cached) yes [ 87s] checking how to print strings... printf [ 87s] checking for a sed that does not truncate output... /usr/bin/sed [ 87s] checking for fgrep... /usr/bin/grep -F [ 87s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 87s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 87s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 87s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 87s] checking whether ln -s works... yes [ 87s] checking the maximum length of command line arguments... 1572864 [ 87s] checking whether the shell understands some XSI constructs... yes [ 87s] checking whether the shell understands "+="... yes [ 87s] checking how to convert armv7l-unknown-linux-gnueabi file names to armv7l-unknown-linux-gnueabi format... func_convert_file_noop [ 87s] checking how to convert armv7l-unknown-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 87s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 87s] checking for objdump... objdump [ 87s] checking how to recognize dependent libraries... pass_all [ 87s] checking for dlltool... no [ 87s] checking how to associate runtime and link libraries... printf %s\n [ 87s] checking for ar... ar [ 87s] checking for archiver @FILE support... @ [ 87s] checking for strip... strip [ 87s] checking for ranlib... ranlib [ 87s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 87s] checking for sysroot... no [ 87s] checking for mt... no [ 87s] checking if : is a manifest tool... no [ 88s] checking for dlfcn.h... yes [ 88s] checking for objdir... .libs [ 88s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 88s] checking for gcc option to produce PIC... -fPIC -DPIC [ 88s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 88s] checking if gcc static flag -static works... no [ 88s] checking if gcc supports -c -o file.o... yes [ 88s] checking if gcc supports -c -o file.o... (cached) yes [ 88s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 88s] checking whether -lc should be explicitly linked in... no [ 88s] checking dynamic linker characteristics... GNU/Linux ld.so [ 88s] checking how to hardcode library paths into programs... immediate [ 88s] checking whether stripping libraries is possible... yes [ 88s] checking if libtool supports shared libraries... yes [ 88s] checking whether to build shared libraries... yes [ 88s] checking whether to build static libraries... no [ 88s] checking for pkg-config... /usr/bin/pkg-config [ 88s] checking pkg-config is at least version 0.9.0... yes [ 88s] checking for dirent.h that defines DIR... yes [ 88s] checking for library containing opendir... none required [ 88s] checking for ANSI C header files... (cached) yes [ 88s] checking fcntl.h usability... yes [ 88s] checking fcntl.h presence... yes [ 88s] checking for fcntl.h... yes [ 88s] checking malloc.h usability... yes [ 88s] checking malloc.h presence... yes [ 88s] checking for malloc.h... yes [ 88s] checking for inttypes.h... (cached) yes [ 88s] checking sys/ioctl.h usability... yes [ 88s] checking sys/ioctl.h presence... yes [ 88s] checking for sys/ioctl.h... yes [ 88s] checking sys/mman.h usability... yes [ 88s] checking sys/mman.h presence... yes [ 88s] checking for sys/mman.h... yes [ 88s] checking ctype.h usability... yes [ 88s] checking ctype.h presence... yes [ 88s] checking for ctype.h... yes [ 88s] checking for unistd.h... (cached) yes [ 89s] checking locale.h usability... yes [ 89s] checking locale.h presence... yes [ 89s] checking for locale.h... yes [ 89s] checking byteswap.h usability... yes [ 89s] checking byteswap.h presence... yes [ 89s] checking for byteswap.h... yes [ 89s] checking endian.h usability... yes [ 89s] checking endian.h presence... yes [ 89s] checking for endian.h... yes [ 89s] checking uuid/uuid.h usability... yes [ 89s] checking uuid/uuid.h presence... yes [ 89s] checking for uuid/uuid.h... yes [ 89s] checking libdevmapper.h usability... yes [ 89s] checking libdevmapper.h presence... yes [ 89s] checking for libdevmapper.h... yes [ 89s] checking for uuid_clear in -luuid... yes [ 89s] checking for library containing clock_gettime... none required [ 89s] checking for posix_memalign... yes [ 89s] checking for clock_gettime... yes [ 89s] checking for an ANSI C-conforming const... yes [ 89s] checking whether byte ordering is bigendian... no [ 89s] checking for off_t... yes [ 89s] checking for special C compiler options needed for large files... no [ 89s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 90s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 90s] checking whether gcc needs -traditional... no [ 90s] checking whether strerror_r is declared... yes [ 90s] checking for strerror_r... yes [ 90s] checking whether strerror_r returns char *... yes [ 90s] checking whether NLS is requested... yes [ 90s] checking for msgfmt... /usr/bin/msgfmt [ 90s] checking for gmsgfmt... /usr/bin/msgfmt [ 90s] checking for xgettext... /usr/bin/xgettext [ 90s] checking for msgmerge... /usr/bin/msgmerge [ 90s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 90s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 90s] checking for shared library run path origin... done [ 90s] checking for CFPreferencesCopyAppValue... no [ 90s] checking for CFLocaleCopyCurrent... no [ 90s] checking for GNU gettext in libc... yes [ 90s] checking whether to use NLS... yes [ 90s] checking where the gettext function comes from... libc [ 90s] checking for poptConfigFileToString in -lpopt... yes [ 91s] checking for DEVMAPPER... yes [ 91s] checking whether dm_task_secure_data is declared... yes [ 91s] checking whether dm_task_retry_remove is declared... yes [ 91s] checking whether DM_UDEV_DISABLE_DISK_RULES_FLAG is declared... yes [ 91s] checking linux/if_alg.h usability... yes [ 91s] checking linux/if_alg.h presence... yes [ 91s] checking for linux/if_alg.h... yes [ 91s] checking for libgcrypt-config... /usr/bin/libgcrypt-config [ 91s] checking for LIBGCRYPT - version >= 1.6.1... yes (1.8.3) [ 91s] configure: WARNING: [ 91s] *** [ 91s] *** The config script /usr/bin/libgcrypt-config was [ 91s] *** built for armv7l-tizen-linux-gnueabi and thus may not match the [ 91s] *** used host armv7l-unknown-linux-gnueabi. [ 91s] *** You may want to use the configure option --with-libgcrypt-prefix [ 91s] *** to specify a matching config script or use $SYSROOT. [ 91s] *** [ 91s] checking for libgcrypt-config... (cached) /usr/bin/libgcrypt-config [ 91s] checking for LIBGCRYPT - version >= 1.1.42... yes (1.8.3) [ 91s] configure: WARNING: [ 91s] *** [ 91s] *** The config script /usr/bin/libgcrypt-config was [ 91s] *** built for armv7l-tizen-linux-gnueabi and thus may not match the [ 91s] *** used host armv7l-unknown-linux-gnueabi. [ 91s] *** You may want to use the configure option --with-libgcrypt-prefix [ 91s] *** to specify a matching config script or use $SYSROOT. [ 91s] *** [ 91s] checking if internal cryptsetup PBKDF2 is compiled-in... no [ 91s] checking that generated files are newer than configure... done [ 91s] configure: creating ./config.status [ 92s] config.status: creating Makefile [ 92s] config.status: creating lib/Makefile [ 92s] config.status: creating lib/libcryptsetup.pc [ 92s] config.status: creating lib/crypto_backend/Makefile [ 92s] config.status: creating lib/luks1/Makefile [ 92s] config.status: creating lib/loopaes/Makefile [ 92s] config.status: creating lib/verity/Makefile [ 92s] config.status: creating lib/tcrypt/Makefile [ 92s] config.status: creating src/Makefile [ 92s] config.status: creating po/Makefile.in [ 92s] config.status: creating man/Makefile [ 92s] config.status: creating tests/Makefile [ 92s] config.status: creating python/Makefile [ 92s] config.status: creating config.h [ 92s] config.status: executing depfiles commands [ 95s] config.status: executing libtool commands [ 95s] config.status: executing po-directories commands [ 95s] config.status: creating po/POTFILES [ 95s] config.status: creating po/Makefile [ 95s] Now type `make' to compile cryptsetup [ 95s] + make -j8 [ 95s] (CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/missing autoheader) [ 97s] rm -f stamp-h1 [ 97s] touch config.h.in [ 98s] cd . && /bin/sh ./config.status config.h [ 98s] config.status: creating config.h [ 98s] config.status: config.h is unchanged [ 98s] make all-recursive [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 98s] Making all in lib [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 98s] Making all in crypto_backend [ 98s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 98s] CC libcrypto_backend_la-crypto_cipher_kernel.lo [ 98s] CC libcrypto_backend_la-pbkdf_check.lo [ 98s] CC libcrypto_backend_la-crc32.lo [ 98s] CC libcrypto_backend_la-crypto_gcrypt.lo [ 98s] CC libcrypto_backend_la-crypto_storage.lo [ 98s] CCLD libcrypto_backend.la [ 98s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 98s] Making all in luks1 [ 98s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 98s] CC libluks1_la-af.lo [ 98s] CC libluks1_la-keymanage.lo [ 98s] CC libluks1_la-keyencryption.lo [ 99s] CCLD libluks1.la [ 99s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 99s] Making all in loopaes [ 99s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 99s] CC libloopaes_la-loopaes.lo [ 99s] CCLD libloopaes.la [ 99s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 99s] Making all in verity [ 99s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 99s] CC libverity_la-verity_hash.lo [ 99s] CC libverity_la-verity.lo [ 99s] CCLD libverity.la [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 100s] Making all in tcrypt [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 100s] CC libtcrypt_la-tcrypt.lo [ 100s] CCLD libtcrypt.la [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 100s] CC libcryptsetup_la-setup.lo [ 100s] CC libcryptsetup_la-utils_crypt.lo [ 100s] CC libcryptsetup_la-utils.lo [ 100s] CC libcryptsetup_la-utils_benchmark.lo [ 100s] CC libcryptsetup_la-utils_loop.lo [ 100s] CC libcryptsetup_la-utils_fips.lo [ 100s] CC libcryptsetup_la-utils_devpath.lo [ 100s] CC libcryptsetup_la-utils_wipe.lo [ 100s] CC libcryptsetup_la-utils_device.lo [ 100s] CC libcryptsetup_la-libdevmapper.lo [ 100s] CC libcryptsetup_la-volumekey.lo [ 100s] CC libcryptsetup_la-random.lo [ 100s] CC libcryptsetup_la-crypt_plain.lo [ 101s] CCLD libcryptsetup.la [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 102s] Making all in src [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 102s] CC cryptsetup-utils_crypt.o [ 102s] CC cryptsetup-utils_tools.o [ 102s] CC cryptsetup-utils_password.o [ 102s] CC cryptsetup-utils_fips.o [ 102s] CC cryptsetup-cryptsetup.o [ 102s] CC cryptsetup-utils_loop.o [ 102s] CC veritysetup-utils_crypt.o [ 102s] CC veritysetup-utils_loop.o [ 102s] CC veritysetup-utils_tools.o [ 102s] CC veritysetup-veritysetup.o [ 102s] CCLD veritysetup [ 102s] CCLD cryptsetup [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 102s] Making all in man [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 102s] make[2]: Nothing to be done for 'all'. [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 102s] Making all in python [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 102s] make[2]: Nothing to be done for 'all'. [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 102s] Making all in tests [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 102s] make[2]: Nothing to be done for 'all'. [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 102s] Making all in po [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 102s] make[2]: Nothing to be done for 'all'. [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 102s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 102s] + exit 0 [ 102s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.cSvCWt [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd cryptsetup-1.6.7 [ 102s] + LANG=C [ 102s] + export LANG [ 102s] + unset DISPLAY [ 102s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm [ 102s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm [ 102s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm [ 102s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm install [ 102s] Making install in lib [ 102s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 102s] Making install in crypto_backend [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 102s] make[3]: Nothing to be done for 'install-exec-am'. [ 102s] make[3]: Nothing to be done for 'install-data-am'. [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/crypto_backend' [ 102s] Making install in luks1 [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 102s] make[3]: Nothing to be done for 'install-exec-am'. [ 102s] make[3]: Nothing to be done for 'install-data-am'. [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/luks1' [ 102s] Making install in loopaes [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 102s] make[3]: Nothing to be done for 'install-exec-am'. [ 102s] make[3]: Nothing to be done for 'install-data-am'. [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/loopaes' [ 102s] Making install in verity [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 102s] make[3]: Nothing to be done for 'install-exec-am'. [ 102s] make[3]: Nothing to be done for 'install-data-am'. [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/verity' [ 102s] Making install in tcrypt [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 102s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 102s] make[3]: Nothing to be done for 'install-exec-am'. [ 102s] make[3]: Nothing to be done for 'install-data-am'. [ 102s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib/tcrypt' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 103s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 103s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib' [ 103s] /bin/sh ../libtool --mode=install /usr/bin/install -c libcryptsetup.la '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib' [ 103s] libtool: install: /usr/bin/install -c .libs/libcryptsetup.so.4.7.0 /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib/libcryptsetup.so.4.7.0 [ 103s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so.4 || { rm -f libcryptsetup.so.4 && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so.4; }; }) [ 103s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib && { ln -s -f libcryptsetup.so.4.7.0 libcryptsetup.so || { rm -f libcryptsetup.so && ln -s libcryptsetup.so.4.7.0 libcryptsetup.so; }; }) [ 103s] libtool: install: /usr/bin/install -c .libs/libcryptsetup.lai /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib/libcryptsetup.la [ 103s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 103s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/include' [ 103s] /usr/bin/install -c -m 644 libcryptsetup.h '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/include' [ 103s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib/pkgconfig' [ 103s] /usr/bin/install -c -m 644 libcryptsetup.pc '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib/pkgconfig' [ 103s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/lib' [ 103s] Making install in src [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 103s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/sbin' [ 103s] /bin/sh ../libtool --mode=install /usr/bin/install -c cryptsetup veritysetup '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/sbin' [ 103s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib' [ 103s] libtool: install: /usr/bin/install -c .libs/cryptsetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/sbin/cryptsetup [ 103s] libtool: install: warning: `../lib/libcryptsetup.la' has not been installed in `/usr/lib' [ 103s] libtool: install: /usr/bin/install -c .libs/veritysetup /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/sbin/veritysetup [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/src' [ 103s] Making install in man [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] /usr/bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/man/man8' [ 103s] /usr/bin/install -c -m 644 cryptsetup.8 veritysetup.8 '/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/man/man8' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/man' [ 103s] Making install in python [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/python' [ 103s] Making install in tests [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/tests' [ 103s] Making install in po [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 103s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share [ 103s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/cs/LC_MESSAGES/cryptsetup.mo [ 103s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/de/LC_MESSAGES/cryptsetup.mo [ 103s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/es/LC_MESSAGES/cryptsetup.mo [ 103s] installing fi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/fi/LC_MESSAGES/cryptsetup.mo [ 103s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/fr/LC_MESSAGES/cryptsetup.mo [ 103s] installing id.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/id/LC_MESSAGES/cryptsetup.mo [ 103s] installing it.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/it/LC_MESSAGES/cryptsetup.mo [ 103s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/nl/LC_MESSAGES/cryptsetup.mo [ 104s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/pl/LC_MESSAGES/cryptsetup.mo [ 104s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/sv/LC_MESSAGES/cryptsetup.mo [ 104s] installing uk.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/uk/LC_MESSAGES/cryptsetup.mo [ 104s] installing vi.gmo as /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/locale/vi/LC_MESSAGES/cryptsetup.mo [ 104s] if test "cryptsetup" = "gettext-tools"; then \ [ 104s] /usr/bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/gettext/po; \ [ 104s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 104s] /usr/bin/install -c -m 644 ./$file \ [ 104s] /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/gettext/po/$file; \ [ 104s] done; \ [ 104s] for file in Makevars; do \ [ 104s] rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/gettext/po/$file; \ [ 104s] done; \ [ 104s] else \ [ 104s] : ; \ [ 104s] fi [ 104s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/po' [ 104s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 104s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 104s] make[2]: Nothing to be done for 'install-exec-am'. [ 104s] make[2]: Nothing to be done for 'install-data-am'. [ 104s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 104s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7' [ 104s] + rm -f /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/info/dir [ 104s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm -regex '.*\.la$' [ 104s] + xargs rm -f -- [ 104s] + find /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm -regex '.*\.a$' [ 104s] + xargs rm -f -- [ 104s] + cp -a /home/abuild/rpmbuild/SOURCES/cryptsetup.manifest /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/binary_package_name.manifest [ 104s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7 [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/lib/libcryptsetup.so.4.7.0 [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/sbin/cryptsetup [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/sbin/veritysetup [ 105s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 105s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 105s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 105s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 105s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 105s] 858 blocks [ 105s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/cryptsetup-debuginfo.manifest [ 105s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/cryptsetup-1.6.7/cryptsetup-debugsource.manifest [ 105s] + /usr/lib/rpm/check-buildroot [ 105s] + /usr/lib/rpm//brp-compress [ 105s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 105s] + /usr/lib/rpm/brp-python-hardlink [ 105s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm [ 105s] Processing files: cryptsetup-1.6.7-5.9.armv7l [ 105s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 105s] bWFpbiBuYW1lPSJfIi8+CiAgICAgICAgPC9yZXF1ZXN0Pgo8L21hbmlmZXN0PgoK [ 105s] [ 105s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.JWGVhr [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd cryptsetup-1.6.7 [ 105s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup [ 105s] + export LICENSEDIR [ 105s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup [ 105s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup [ 105s] + exit 0 [ 105s] Provides: cryptsetup = 1.6.7-5.9 cryptsetup(armv7l-32) = 1.6.7-5.9 libcryptsetup.so.4 libcryptsetup.so.4(CRYPTSETUP_1.0) [ 105s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 105s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 105s] Requires(post): /sbin/ldconfig [ 105s] Requires(postun): /sbin/ldconfig [ 105s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libcryptsetup.so.4 libcryptsetup.so.4(CRYPTSETUP_1.0) libdevmapper.so.1.02 libdevmapper.so.1.02(Base) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libpopt.so.0 libpopt.so.0(LIBPOPT_0) libuuid.so.1 libuuid.so.1(UUID_1.0) rtld(GNU_HASH) [ 105s] Processing files: cryptsetup-debugsource-1.6.7-5.9.armv7l [ 105s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 105s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 105s] [ 105s] Provides: cryptsetup-debugsource = 1.6.7-5.9 cryptsetup-debugsource(armv7l-32) = 1.6.7-5.9 [ 105s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 105s] Processing files: cryptsetup-devel-1.6.7-5.9.armv7l [ 105s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.TA12Po [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd cryptsetup-1.6.7 [ 105s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-devel [ 105s] + export LICENSEDIR [ 105s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-devel [ 105s] + cp -pr COPYING.LGPL-2.1+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-devel [ 105s] + exit 0 [ 106s] Provides: cryptsetup-devel = 1.6.7-5.9 cryptsetup-devel(armv7l-32) = 1.6.7-5.9 pkgconfig(libcryptsetup) = 1.6.7 [ 106s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 106s] Requires: /usr/bin/pkg-config libcryptsetup.so.4 [ 106s] Processing files: cryptsetup-locale-1.6.7-5.9.armv7l [ 106s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.SPgx7m [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd cryptsetup-1.6.7 [ 106s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-locale [ 106s] + export LICENSEDIR [ 106s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-locale [ 106s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-locale [ 106s] + exit 0 [ 106s] Provides: cryptsetup-locale = 1.6.7-5.9 cryptsetup-locale(armv7l-32) = 1.6.7-5.9 [ 106s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 106s] Processing files: cryptsetup-doc-1.6.7-5.9.armv7l [ 106s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.HEg1xl [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd cryptsetup-1.6.7 [ 106s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-doc [ 106s] + export LICENSEDIR [ 106s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-doc [ 106s] + cp -pr COPYING.GPL-2.0+ /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm/usr/share/licenses/cryptsetup-doc [ 106s] + exit 0 [ 106s] Provides: cryptsetup-doc = 1.6.7-5.9 cryptsetup-doc(armv7l-32) = 1.6.7-5.9 [ 106s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 106s] Processing files: cryptsetup-debuginfo-1.6.7-5.9.armv7l [ 106s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 106s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 106s] [ 106s] warning: File listed twice: /usr/lib/debug/.build-id [ 106s] warning: File listed twice: /usr/lib/debug/.build-id [ 106s] Provides: cryptsetup-debuginfo = 1.6.7-5.9 cryptsetup-debuginfo(armv7l-32) = 1.6.7-5.9 [ 106s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 106s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm [ 106s] warning: Could not canonicalize hostname: obspw26 [ 106s] Wrote: /home/abuild/rpmbuild/SRPMS/cryptsetup-1.6.7-5.9.src.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-1.6.7-5.9.armv7l.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debugsource-1.6.7-5.9.armv7l.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-devel-1.6.7-5.9.armv7l.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-locale-1.6.7-5.9.armv7l.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-doc-1.6.7-5.9.armv7l.rpm [ 107s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/cryptsetup-debuginfo-1.6.7-5.9.armv7l.rpm [ 107s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Radpwk [ 107s] + umask 022 [ 107s] + cd /home/abuild/rpmbuild/BUILD [ 107s] + cd cryptsetup-1.6.7 [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/cryptsetup-1.6.7-5.9.arm [ 107s] + exit 0 [ 107s] ... checking for files with abuild user/group [ 107s] ... creating baselibs [ 108s] [ 108s] obspw26 finished "build cryptsetup.spec" at Fri Nov 23 07:27:22 UTC 2018. [ 108s] Retried build at Sat Nov 24 05:43:02 2018 returned same result, skipped Retried build at Fri Nov 30 22:13:05 2018 returned same result, skipped Retried build at Wed Dec 5 06:59:27 2018 returned same result, skipped Retried build at Fri Dec 14 19:19:46 2018 returned same result, skipped Retried build at Fri Dec 21 21:39:29 2018 returned same result, skipped Retried build at Fri Dec 28 14:17:50 2018 returned same result, skipped Retried build at Fri Jan 11 09:41:50 2019 returned same result, skipped Retried build at Fri Jan 18 10:22:43 2019 returned same result, skipped Retried build at Mon Jan 28 07:08:29 2019 returned same result, skipped Retried build at Fri Feb 1 09:35:50 2019 returned same result, skipped Retried build at Fri Feb 8 11:10:04 2019 returned same result, skipped Retried build at Fri Feb 15 14:02:08 2019 returned same result, skipped Retried build at Fri Mar 8 12:37:45 2019 returned same result, skipped Retried build at Sat Mar 16 18:08:25 2019 returned same result, skipped Retried build at Wed Mar 20 08:37:47 2019 returned same result, skipped Retried build at Mon Mar 25 01:29:26 2019 returned same result, skipped Retried build at Tue Apr 2 12:42:13 2019 returned same result, skipped Retried build at Mon Apr 8 04:01:56 2019 returned same result, skipped Retried build at Fri Apr 12 16:03:12 2019 returned same result, skipped Retried build at Tue Apr 16 07:33:37 2019 returned same result, skipped Retried build at Thu Apr 18 04:31:01 2019 returned same result, skipped Retried build at Mon Apr 22 00:57:24 2019 returned same result, skipped Retried build at Fri May 10 11:34:44 2019 returned same result, skipped