[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw03 started "build _service:gbs:xmlsec1.spec" at Mon Aug 26 06:46:19 UTC 2019. [ 0s] [ 0s] Building xmlsec1 for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '4b559e75460f172ebedb56fab9a0a99d' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:xmlsec1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:xmlsec1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:xmlsec1.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 2s] [8/40] preinstalling diffutils... [ 2s] [9/40] preinstalling grep... [ 2s] [10/40] preinstalling libattr... [ 2s] [11/40] preinstalling libbz2... [ 2s] [12/40] preinstalling libcap... [ 2s] [13/40] preinstalling libelf... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libblkid... [ 7s] [30/40] preinstalling smack... [ 7s] [31/40] preinstalling bzip2... [ 7s] [32/40] preinstalling libmagic... [ 8s] [33/40] preinstalling libxml2... [ 8s] [34/40] preinstalling libmount... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/109] installing libmagic-data-5.36-15.76 [ 9s] [2/109] installing setup-0.9-9.22 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [3/109] installing filesystem-3.1-8.1 [ 9s] [4/109] installing glibc-2.24-17.2 [ 9s] [5/109] installing libatomic-6.2.1-37.2 [ 9s] [6/109] installing libgcc-6.2.1-37.2 [ 10s] [7/109] installing bash-3.2.57-6.4 [ 10s] [8/109] installing binutils-2.27-14.29 [ 10s] [9/109] installing cpio-2.11-3.4 [ 10s] [10/109] installing diffutils-3.3-3.4 [ 10s] [11/109] installing fdupes-1.40-3.572 [ 10s] [12/109] installing findutils-4.3.8-6.92 [ 10s] [13/109] installing hostname-3.20-5.4 [ 10s] [14/109] installing libattr-2.4.47-5.341 [ 11s] [15/109] installing libbz2-1.0.6-5.42 [ 11s] [16/109] installing libcap-2.24-4.544 [ 11s] [17/109] installing libelf-0.153-3.192 [ 12s] [18/109] installing libext2fs-1.43.4-6.2 [ 12s] [19/109] installing libfreebl3-3.34.1-5.288 [ 12s] [20/109] installing libgomp-6.2.1-37.2 [ 12s] [21/109] installing libgpg-error-1.27-5.4 [ 13s] [22/109] installing libitm-6.2.1-37.2 [ 13s] [23/109] installing libltdl-2.4.2-5.15 [ 13s] [24/109] installing liblua-5.1.5-5.29 [ 14s] [25/109] installing liblzma-5.2.4-6.109 [ 14s] [26/109] installing libopenssl11-1.1.1c-6.16 [ 14s] [27/109] installing libpcre-8.41-6.13 [ 15s] [28/109] installing libpopt-1.16-4.87 [ 15s] [29/109] installing libsmack-1.3.1-5.222 [ 15s] [30/109] installing libsmartcols-2.30-13.19 [ 15s] [31/109] installing libsqlite-3.26.0-14.29 [ 16s] [32/109] installing libstdc++-6.2.1-37.2 [ 16s] [33/109] installing libuuid-2.30-13.19 [ 16s] [34/109] installing m4-1.4.17-3.4 [ 16s] [35/109] installing net-tools-2.0_20121208git-3.2 [ 16s] [36/109] installing nspr-4.12-4.67 [ 17s] [37/109] installing patch-2.7-3.87 [ 17s] [38/109] installing pkg-config-0.28-5.494 [ 17s] [39/109] installing sed-4.1c-4.4 [ 17s] [40/109] installing update-alternatives-1.18.15-4.4 [ 17s] [41/109] installing which-2.20-6.4 [ 17s] [42/109] installing zlib-1.2.11-5.239 [ 17s] [43/109] installing build-compare-2015.04.28-3.243 [ 17s] [44/109] installing libstdc++-devel-6.2.1-37.2 [ 18s] [45/109] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 19s] [46/109] installing terminfo-base-full-6.1-11.97 [ 20s] [47/109] installing cpp-6.2.1-37.2 [ 20s] [48/109] installing gcc-c++-6.2.1-37.2 [ 21s] [49/109] installing xz-devel-5.2.4-6.109 [ 21s] [50/109] installing coreutils-6.9-3.28 [ 21s] [51/109] installing db4-4.8.30.NC-3.542 [ 21s] [52/109] installing gawk-3.1.5-5.5 [ 21s] [53/109] installing grep-2.5.2-6.4 [ 21s] [54/109] installing libacl-2.2.52-5.359 [ 22s] [55/109] installing libasm-0.153-3.192 [ 22s] [56/109] installing libblkid-2.30-13.19 [ 22s] [57/109] installing libcc1-6.2.1-37.2 [ 23s] [58/109] installing libgcrypt-1.8.3-7.4 [ 23s] [59/109] installing libgfortran-6.2.1-37.2 [ 23s] [60/109] installing libubsan-6.2.1-37.2 [ 24s] [61/109] installing make-4.0-4.97 [ 24s] [62/109] installing nss-certs-3.34.1-5.288 [ 24s] [63/109] installing smack-1.3.1-5.222 [ 24s] [64/109] installing bzip2-1.0.6-5.42 [ 24s] [65/109] installing libmagic-5.36-15.76 [ 25s] [66/109] installing libxml2-2.9.7-7.49 [ 25s] [67/109] installing xz-5.2.4-6.109 [ 25s] [68/109] installing libdw-0.153-3.192 [ 25s] [69/109] installing linux-glibc-devel-3.10-4.188 [ 26s] [70/109] installing file-5.36-15.76 [ 26s] [71/109] installing glibc-locale-2.24-17.2 [ 26s] [72/109] installing libmount-2.30-13.19 [ 27s] [73/109] installing tar-1.17-4.4 [ 27s] [74/109] installing gzip-1.3.12-7.314 [ 27s] [75/109] installing libfdisk-2.30-13.19 [ 27s] [76/109] installing libncurses6-6.1-11.97 [ 27s] [77/109] installing libxslt-1.1.31-7.2 [ 28s] [78/109] installing pam-1.1.6-8.2 [ 28s] [79/109] installing perl-5.26.0-9.30 [ 30s] [80/109] installing tzdata-2019a-11.1 [ 30s] [81/109] installing elfutils-0.153-3.192 [ 30s] [82/109] installing gcc-6.2.1-37.2 [ 31s] [83/109] installing build-mkbaselibs-20120927-3.1 [ 31s] [84/109] installing libncurses-6.1-11.97 [ 31s] [85/109] installing glibc-devel-2.24-17.2 [ 31s] [86/109] installing qemu-accel-x86_64-armv7l-0.4-13.40 [ 39s] [87/109] installing autoconf-2.69-5.176 [ 39s] [88/109] installing less-466-8.9 [ 39s] [89/109] installing libreadline-5.2-5.59 [ 40s] [90/109] installing procps-ng-3.3.15-8.4 [ 40s] [91/109] installing libxslt-tools-1.1.31-7.2 [ 40s] [92/109] installing ncurses-devel-6.1-11.97 [ 40s] [93/109] installing readline-devel-5.2-5.59 [ 40s] [94/109] installing automake-1.15.1-6.285 [ 41s] [95/109] installing zlib-devel-1.2.11-5.239 [ 41s] [96/109] installing libxml2-tools-2.9.7-7.49 [ 41s] [97/109] installing build-20120927-3.1 [ 41s] [98/109] installing libgpg-error-devel-1.27-5.4 [ 41s] [99/109] installing util-linux-2.30-13.19 [ 41s] [100/109] installing libopenssl1.1-devel-1.1.1c-6.16 [ 41s] [101/109] installing libtool-2.4.2-5.15 [ 41s] [102/109] installing util-linux-su-2.30-13.19 [ 42s] [103/109] installing libgcrypt-devel-1.8.3-7.4 [ 42s] [104/109] installing libxml2-devel-2.9.7-7.49 [ 42s] [105/109] installing libxslt-devel-1.1.31-7.2 [ 43s] [106/109] installing nss-3.34.1-5.288 [ 44s] [107/109] installing libsoftokn3-3.34.1-5.288 [ 44s] [108/109] installing rpm-4.11.0.1-14.8 [ 45s] [109/109] installing rpm-build-4.11.0.1-14.8 [ 45s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 45s] now finalizing build dir... [ 45s] Running build time source services... [ 45s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for xmlsec1.spec: [ 45s] 5c5 [ 45s] < Release: 0 [ 45s] --- [ 45s] > Release: 7.2 [ 45s] 136a137 [ 45s] > %changelog [ 45s] ----------------------------------------------------------------- [ 45s] ----- building xmlsec1.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 46s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/4b559e75460f172ebedb56fab9a0a99d-xmlsec1' -ba /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 46s] Building target platforms: armv7l-tizen-linux [ 46s] Building for target armv7l-tizen-linux [ 46s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.NRfO63 [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + rm -rf xmlsec1-1.2.28 [ 46s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.28.tar.gz [ 46s] + /bin/tar -xf - [ 46s] + STATUS=0 [ 46s] + '[' 0 -ne 0 ']' [ 46s] + cd xmlsec1-1.2.28 [ 46s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 46s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 46s] + exit 0 [ 46s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SxnbPR [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd xmlsec1-1.2.28 [ 46s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + LDFLAGS= [ 46s] + export LDFLAGS [ 46s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -std=gnu++11' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + autoreconf -v --install --force [ 48s] autoreconf: Entering directory `.' [ 48s] autoreconf: configure.ac: not using Gettext [ 49s] autoreconf: running: aclocal --force -I m4 [ 58s] autoreconf: configure.ac: tracing [ 59s] autoreconf: running: libtoolize --copy --force [ 59s] libtoolize: putting auxiliary files in `.'. [ 59s] libtoolize: copying file `./ltmain.sh' [ 59s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 59s] libtoolize: copying file `m4/libtool.m4' [ 59s] libtoolize: copying file `m4/ltoptions.m4' [ 59s] libtoolize: copying file `m4/ltsugar.m4' [ 60s] libtoolize: copying file `m4/ltversion.m4' [ 60s] libtoolize: copying file `m4/lt~obsolete.m4' [ 69s] autoreconf: running: /usr/bin/autoconf --force [ 73s] autoreconf: running: /usr/bin/autoheader --force [ 75s] autoreconf: running: automake --add-missing --copy --force-missing [ 78s] configure.ac:37: installing './compile' [ 78s] configure.ac:14: installing './config.guess' [ 78s] configure.ac:14: installing './config.sub' [ 78s] configure.ac:25: installing './install-sh' [ 78s] configure.ac:25: installing './missing' [ 78s] apps/Makefile.am: installing './depcomp' [ 88s] autoreconf: Leaving directory `.' [ 88s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 88s] configure: WARNING: unrecognized options: --enable-dynamic [ 88s] checking build system type... armv7l-tizen-linux-gnueabi [ 88s] checking host system type... armv7l-tizen-linux-gnueabi [ 88s] checking for a BSD-compatible install... /bin/install -c [ 88s] checking whether build environment is sane... yes [ 88s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 88s] checking for gawk... gawk [ 88s] checking whether make sets $(MAKE)... yes [ 88s] checking whether make supports nested variables... yes [ 88s] checking whether UID '399' is supported by ustar format... yes [ 88s] checking whether GID '399' is supported by ustar format... yes [ 88s] checking how to create a ustar tar archive... gnutar [ 88s] checking whether to enable maintainer-specific portions of Makefiles... no [ 88s] checking whether make supports nested variables... (cached) yes [ 88s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 89s] checking whether the C compiler works... yes [ 89s] checking for C compiler default output file name... a.out [ 89s] checking for suffix of executables... [ 89s] checking whether we are cross compiling... no [ 89s] checking for suffix of object files... o [ 89s] checking whether we are using the GNU C compiler... yes [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 89s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 89s] checking for style of include used by make... GNU [ 89s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 89s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 89s] checking for grep that handles long lines and -e... /bin/grep [ 89s] checking for egrep... /bin/grep -E [ 89s] checking for ANSI C header files... yes [ 89s] checking how to print strings... printf [ 89s] checking for a sed that does not truncate output... /bin/sed [ 89s] checking for fgrep... /bin/grep -F [ 89s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 89s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 89s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 89s] checking the name lister (/bin/nm -B) interface... BSD nm [ 89s] checking whether ln -s works... yes [ 89s] checking the maximum length of command line arguments... 1572864 [ 89s] checking whether the shell understands some XSI constructs... yes [ 89s] checking whether the shell understands "+="... yes [ 89s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 89s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 89s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 89s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 89s] checking for objdump... objdump [ 89s] checking how to recognize dependent libraries... pass_all [ 89s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 89s] checking for dlltool... no [ 89s] checking how to associate runtime and link libraries... printf %s\n [ 89s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 89s] checking for ar... ar [ 89s] checking for archiver @FILE support... @ [ 89s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 89s] checking for strip... strip [ 89s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 89s] checking for ranlib... ranlib [ 89s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 89s] checking for sysroot... no [ 89s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 89s] checking for mt... no [ 89s] checking if : is a manifest tool... no [ 89s] checking for sys/types.h... yes [ 89s] checking for sys/stat.h... yes [ 89s] checking for stdlib.h... yes [ 89s] checking for string.h... yes [ 89s] checking for memory.h... yes [ 89s] checking for strings.h... yes [ 89s] checking for inttypes.h... yes [ 89s] checking for stdint.h... yes [ 90s] checking for unistd.h... yes [ 90s] checking for dlfcn.h... yes [ 90s] checking for objdir... .libs [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 90s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 90s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 90s] checking whether -lc should be explicitly linked in... no [ 90s] checking dynamic linker characteristics... GNU/Linux ld.so [ 90s] checking how to hardcode library paths into programs... immediate [ 90s] checking whether stripping libraries is possible... yes [ 90s] checking if libtool supports shared libraries... yes [ 90s] checking whether to build shared libraries... yes [ 90s] checking whether to build static libraries... yes [ 90s] checking for cp... /bin/cp [ 90s] checking for mv... /bin/mv [ 90s] checking for tar... /bin/tar [ 90s] checking for perl... /bin/perl [ 90s] checking for help2man... no [ 90s] checking for xsltproc... /bin/xsltproc [ 90s] checking for man2html... no [ 90s] checking for gtkdoc-mkhtml... no [ 90s] checking for gtkdoc-mkdb... no [ 90s] checking for gtkdoc-scan... no [ 90s] checking for dirent.h that defines DIR... yes [ 90s] checking for library containing opendir... none required [ 90s] checking for ANSI C header files... (cached) yes [ 90s] checking stdio.h usability... yes [ 90s] checking stdio.h presence... yes [ 90s] checking for stdio.h... yes [ 90s] checking for stdlib.h... (cached) yes [ 90s] checking for string.h... (cached) yes [ 90s] checking ctype.h usability... yes [ 90s] checking ctype.h presence... yes [ 90s] checking for ctype.h... yes [ 90s] checking errno.h usability... yes [ 90s] checking errno.h presence... yes [ 90s] checking for errno.h... yes [ 90s] checking ansidecl.h usability... no [ 90s] checking ansidecl.h presence... no [ 90s] checking for ansidecl.h... no [ 90s] checking time.h usability... yes [ 90s] checking time.h presence... yes [ 90s] checking for time.h... yes [ 90s] checking for strchr... yes [ 90s] checking for strrchr... yes [ 90s] checking for printf... yes [ 90s] checking for sprintf... yes [ 90s] checking for fprintf... yes [ 90s] checking for snprintf... yes [ 91s] checking for vfprintf... yes [ 91s] checking for vsprintf... yes [ 91s] checking for vsnprintf... yes [ 91s] checking for sscanf... yes [ 91s] checking for timegm... yes [ 91s] checking for development environment... disabled [ 91s] checking for man pages build... disabled [ 91s] checking for docs build... disabled [ 91s] checking for shared library suffix... .so [ 91s] checking for __FUNCTION__ or __func__... __func__ [ 91s] checking size of size_t... 4 [ 91s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 91s] checking pkg-config is at least version 0.9.0... yes [ 91s] checking for LIBXML... yes [ 91s] checking for libxml2 library >= 2.8.0... yes [ 91s] checking for LIBXSLT... yes [ 91s] checking for libxslt library >= 1.0.20... yes [ 91s] checking for OPENSSL... no [ 91s] checking for openssl library installation in the typical folders... yes ("-I/usr/include -L/usr/lib") [ 91s] checking for openssl library >= 1.0.0... yes (openssl version '1.1.0') [ 91s] checking for NSPR... no [ 91s] checking for NSPR... no [ 92s] checking for NSPR... no [ 92s] checking for NSPR... no [ 92s] checking for NSS... no [ 92s] checking for NSS... no [ 92s] checking for NSS... no [ 92s] checking for NSS... no [ 92s] checking for nspr library installation in the typical folders... not found [ 92s] checking for nss library installation in the typical folders... not found [ 92s] checking for nspr library installation... not found [ 92s] checking for nss library installation... not found [ 92s] checking for nspr library >= 4.4.1... no [ 92s] checking for nss library >= 3.11.1... no [ 92s] checking for GCRYPT... no [ 92s] checking for GCRYPT... no [ 92s] checking for GCRYPT... no [ 93s] checking for GCRYPT... no [ 93s] checking for libgcrypt-config... /bin/libgcrypt-config [ 93s] checking for libgcrypt library >= 1.4.0... yes [ 93s] checking for libgnutls library >= 2.8.0... disabled [ 93s] checking for mscrypto... not found [ 93s] checking for mscng... not found [ 93s] checking for default crypto library... yes ("openssl") [ 93s] checking for MD5 support... yes [ 93s] checking for RIPEMD-160 support... yes [ 93s] checking for SHA1 support... yes [ 93s] checking for SHA224 support... yes [ 93s] checking for SHA256 support... yes [ 93s] checking for SHA384 support... yes [ 93s] checking for SHA512 support... yes [ 93s] checking for HMAC support... yes [ 93s] checking for DSA support... yes [ 93s] checking for RSA support... yes [ 93s] checking for x509 support... yes [ 93s] checking for DES support... yes [ 93s] checking for AES support... yes [ 93s] checking for GOST support... disabled [ 93s] checking for EXPERMIENTAL GOST2012 support... disabled [ 93s] checking for XMLDSig support... yes [ 93s] checking for XMLEnc support... yes [ 93s] checking for soap support... disabled [ 93s] checking for mans... yes [ 93s] checking for docs... yes [ 93s] checking for apps... yes [ 93s] checking for static linking... disabled [ 93s] checking for xmlsec-crypto dynamic loading support... disabled [ 93s] checking for xmlsec-crypto dynamic loading support in command line tool... disabled [ 93s] checking for docs folder... $(htmldir) [ 93s] checking for Simple Keys Manager testing... yes [ 93s] checking for templates testing... yes [ 93s] checking for debugging... disabled [ 93s] checking for warnings as errors... disabled [ 93s] checking for profiling... disabled [ 93s] checking for pedantic... disabled [ 93s] checking that generated files are newer than configure... done [ 93s] configure: creating ./config.status [ 93s] config.status: creating include/xmlsec/openssl/Makefile [ 93s] config.status: creating src/openssl/Makefile [ 93s] config.status: creating include/xmlsec/gcrypt/Makefile [ 93s] config.status: creating src/gcrypt/Makefile [ 93s] config.status: creating include/xmlsec/version.h [ 93s] config.status: creating Makefile [ 93s] config.status: creating include/Makefile [ 93s] config.status: creating include/xmlsec/Makefile [ 93s] config.status: creating include/xmlsec/private/Makefile [ 93s] config.status: creating src/Makefile [ 93s] config.status: creating apps/Makefile [ 94s] config.status: creating docs/Makefile [ 94s] config.status: creating docs/api/Makefile [ 94s] config.status: creating man/Makefile [ 94s] config.status: creating xmlsec1-openssl.pc [ 94s] config.status: creating xmlsec1-gnutls.pc [ 94s] config.status: creating xmlsec1-gcrypt.pc [ 94s] config.status: creating xmlsec1-nss.pc [ 94s] config.status: creating xmlsec1.spec [ 94s] config.status: creating xmlsec1Conf.sh [ 94s] config.status: creating xmlsec1-config [ 94s] config.status: creating config.h [ 94s] config.status: executing depfiles commands [ 95s] config.status: executing libtool commands [ 95s] configure: WARNING: unrecognized options: --enable-dynamic [ 95s] + /bin/make -j4 CFLAGS+=-fPIE LDFLAGS+=-pie [ 95s] /bin/make all-recursive [ 95s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 95s] Making all in include [ 95s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 95s] Making all in xmlsec [ 95s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 95s] Making all in private [ 95s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 95s] make[4]: Nothing to be done for 'all'. [ 95s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 95s] Making all in openssl [ 95s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 95s] make[4]: Nothing to be done for 'all'. [ 95s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 95s] Making all in gcrypt [ 95s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 95s] make[4]: Nothing to be done for 'all'. [ 95s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 95s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 95s] make[4]: Nothing to be done for 'all-am'. [ 95s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 95s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 95s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 95s] make[3]: Nothing to be done for 'all-am'. [ 95s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 95s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 95s] Making all in src [ 95s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 95s] Making all in . [ 95s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 95s] CC app.lo [ 95s] CC base64.lo [ 95s] CC bn.lo [ 95s] CC buffer.lo [ 95s] CC c14n.lo [ 96s] CC dl.lo [ 96s] CC enveloped.lo [ 96s] CC errors.lo [ 96s] CC io.lo [ 96s] CC keyinfo.lo [ 96s] CC keys.lo [ 96s] CC keysdata.lo [ 96s] CC keysmngr.lo [ 97s] CC kw_aes_des.lo [ 97s] CC list.lo [ 97s] CC membuf.lo [ 97s] CC nodeset.lo [ 97s] CC parser.lo [ 97s] CC relationship.lo [ 97s] CC strings.lo [ 97s] CC templates.lo [ 97s] CC transforms.lo [ 97s] CC x509.lo [ 98s] CC xmldsig.lo [ 98s] CC xmlenc.lo [ 98s] CC xmlsec.lo [ 98s] CC xmltree.lo [ 98s] CC xpath.lo [ 99s] CC xslt.lo [ 99s] CCLD libxmlsec1.la [ 100s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 100s] Making all in openssl [ 100s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 100s] CC libxmlsec1_openssl_la-app.lo [ 100s] CC libxmlsec1_openssl_la-bn.lo [ 100s] CC libxmlsec1_openssl_la-ciphers.lo [ 100s] CC libxmlsec1_openssl_la-crypto.lo [ 100s] CC libxmlsec1_openssl_la-digests.lo [ 100s] CC libxmlsec1_openssl_la-evp.lo [ 101s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 101s] CC libxmlsec1_openssl_la-hmac.lo [ 101s] CC libxmlsec1_openssl_la-kw_aes.lo [ 101s] CC libxmlsec1_openssl_la-kw_des.lo [ 101s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 101s] CC libxmlsec1_openssl_la-signatures.lo [ 102s] CC libxmlsec1_openssl_la-symkeys.lo [ 102s] CC libxmlsec1_openssl_la-x509.lo [ 102s] CC libxmlsec1_openssl_la-x509vfy.lo [ 103s] CCLD libxmlsec1-openssl.la [ 103s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 104s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 104s] Making all in gcrypt [ 104s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 104s] CC libxmlsec1_gcrypt_la-app.lo [ 104s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 104s] CC libxmlsec1_gcrypt_la-asn1.lo [ 104s] CC libxmlsec1_gcrypt_la-crypto.lo [ 104s] CC libxmlsec1_gcrypt_la-digests.lo [ 104s] CC libxmlsec1_gcrypt_la-hmac.lo [ 104s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 104s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 104s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 105s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 105s] CC libxmlsec1_gcrypt_la-signatures.lo [ 106s] CCLD libxmlsec1-gcrypt.la [ 106s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 106s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 106s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 106s] Making all in apps [ 106s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 106s] CC xmlsec.o [ 106s] CC crypto.o [ 106s] CC cmdline.o [ 107s] CCLD xmlsec1 [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 107s] Making all in man [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 107s] make[2]: Nothing to be done for 'all'. [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 107s] Making all in docs [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 107s] Making all in api [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 107s] Copying api-docs... [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 107s] make[3]: Nothing to be done for 'all-am'. [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 107s] ======= Run 'make docs' in the xmlsec/docs folder to rebuild docs [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 107s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 107s] + exit 0 [ 107s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.zrAxGN [ 107s] + umask 022 [ 107s] + cd /home/abuild/rpmbuild/BUILD [ 107s] + cd xmlsec1-1.2.28 [ 107s] + LANG=C [ 107s] + export LANG [ 107s] + unset DISPLAY [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm [ 107s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm [ 107s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm install [ 107s] Making install in include [ 107s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 107s] Making install in xmlsec [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] Making install in private [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 107s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 107s] /bin/make install-exec-hook [ 107s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 107s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/private [ 107s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 107s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/private' [ 107s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/private' [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 107s] Making install in openssl [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 107s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 107s] /bin/make install-exec-hook [ 107s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 107s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/openssl [ 107s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 107s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/openssl' [ 107s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/openssl' [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 107s] Making install in gcrypt [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 107s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 107s] /bin/make install-exec-hook [ 107s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 107s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/gcrypt [ 107s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 107s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 107s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] /bin/make install-exec-hook [ 107s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec [ 107s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec' [ 107s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/include/xmlsec1/xmlsec' [ 107s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 107s] make[3]: Nothing to be done for 'install-exec-am'. [ 107s] make[3]: Nothing to be done for 'install-data-am'. [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 107s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 107s] Making install in src [ 107s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 107s] Making install in . [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 107s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 107s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 107s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.28 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1.so.1.2.28 [ 107s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so.1; }; }) [ 107s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so; }; }) [ 107s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1.la [ 107s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1.a [ 107s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1.a [ 107s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1.a [ 107s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 107s] make[3]: Nothing to be done for 'install-data-am'. [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 107s] Making install in openssl [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 107s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 107s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 107s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 107s] libtool: install: warning: relinking `libxmlsec1-openssl.la' [ 107s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-openssl.la -rpath /usr/lib libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -Wl,-rpath-link -Wl,/usr/lib -L/usr/lib -lcrypto -ldl -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm) [ 108s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 108s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-openssl.so.1.2.28 [ 108s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1; }; }) [ 108s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so; }; }) [ 108s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-openssl.la [ 108s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-openssl.a [ 108s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-openssl.a [ 108s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-openssl.a [ 108s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 108s] make[3]: Nothing to be done for 'install-data-am'. [ 108s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 108s] Making install in gcrypt [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 108s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 108s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 108s] libtool: install: warning: relinking `libxmlsec1-gcrypt.la' [ 108s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-gcrypt.la -rpath /usr/lib libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -lgcrypt -lgpg-error -lxslt -lxml2 -lz -llzma -ldl -lm -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm) [ 108s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 108s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.28 [ 108s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1; }; }) [ 108s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so; }; }) [ 108s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-gcrypt.la [ 108s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 108s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 108s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-gcrypt.a [ 108s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 108s] make[3]: Nothing to be done for 'install-data-am'. [ 108s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 108s] Making install in apps [ 108s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/bin' [ 108s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/bin' [ 108s] libtool: install: warning: `../src/openssl/libxmlsec1-openssl.la' has not been installed in `/usr/lib' [ 108s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/libxmlsec1.la' has not been installed in `/usr/lib' [ 108s] libtool: install: warning: `../src/libxmlsec1.la' has not been installed in `/usr/lib' [ 108s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/bin/xmlsec1 [ 108s] make[2]: Nothing to be done for 'install-data-am'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 108s] Making install in man [ 108s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 108s] make[2]: Nothing to be done for 'install-exec-am'. [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/man/man1' [ 108s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/man/man1' [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 108s] Making install in docs [ 108s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 108s] Making install in api [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 108s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 108s] make[3]: Nothing to be done for 'install-exec-am'. [ 108s] make[3]: Nothing to be done for 'install-data-am'. [ 108s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 108s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 108s] make[3]: Nothing to be done for 'install-exec-am'. [ 108s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1 [ 108s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1/images [ 108s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1/api [ 108s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1/api/images [ 108s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1 [ 108s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1 [ 108s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1/images [ 108s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1/api [ 108s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 108s] Makefile:831: recipe for target 'install-data-local' failed [ 108s] make[3]: [install-data-local] Error 1 (ignored) [ 108s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1/api/images [ 108s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 108s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/bin' [ 108s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/bin' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 108s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/aclocal' [ 108s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/aclocal' [ 108s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig' [ 108s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig' [ 109s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 109s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 109s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/info/dir [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm -regex '.*\.la$' [ 109s] + xargs rm -f -- [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/info [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/packages [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1 [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc/xmlsec1-1.2.28 [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/gtk-doc [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/doc [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/man [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm -regex '.*/man/man./.*.[0-9]' [ 109s] + xargs rm -f -- [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm -regex '.*/man/../man./.*.[0-9]' [ 109s] + xargs rm -f -- [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 109s] + xargs rm -f -- [ 109s] + _target= [ 109s] + _symlinks=0 [ 109s] + _files=() [ 109s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm [ 109s] + read _file [ 109s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 109s] + _files+=($_file) [ 109s] + read _file [ 109s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 109s] + _files+=($_file) [ 109s] + read _file [ 109s] + test -z [ 109s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 109s] ++ for i in '${_files[*]}' [ 109s] ++ sort [ 109s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 109s] ++ for i in '${_files[*]}' [ 109s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 109s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 109s] ++ seq 1 1 [ 109s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 109s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 109s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 109s] + test 0 = 1 [ 109s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/pkgconfig/xmlsec1.pc [ 109s] + _files=() [ 109s] + read _file [ 109s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28 [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/bin/xmlsec1 [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.28 [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1-openssl.so.1.2.28 [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/lib/libxmlsec1.so.1.2.28 [ 110s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 110s] cpio: glibc-2.24/csu/init.c: Cannot stat: No such file or directory [ 110s] cpio: glibc-2.24/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 110s] cpio: glibc-2.24/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 110s] cpio: glibc-2.24/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 110s] 4190 blocks [ 110s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debuginfo.manifest [ 110s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debugsource.manifest [ 110s] + /usr/lib/rpm/check-buildroot [ 110s] + /usr/lib/rpm//brp-compress [ 110s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 110s] + /usr/lib/rpm/brp-python-hardlink [ 110s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm [ 110s] Processing files: xmlsec1-1.2.28-7.2.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.dCnxWT [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd xmlsec1-1.2.28 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1 [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1 [ 110s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1 [ 110s] + exit 0 [ 110s] Provides: libxmlsec1.so.1 xmlsec1 = 1.2.28-7.2 xmlsec1(armv7l-32) = 1.2.28-7.2 [ 110s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires(post): /sbin/ldconfig [ 110s] Requires(postun): /sbin/ldconfig [ 110s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.12) libxml2.so.2(LIBXML2_2.6.2) libxmlsec1-openssl.so.1 libxmlsec1.so.1 libxslt.so.1 libxslt.so.1(LIBXML2_1.0.11) libxslt.so.1(LIBXML2_1.0.22) rtld(GNU_HASH) [ 110s] Processing files: xmlsec1-debugsource-1.2.28-7.2.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Provides: xmlsec1-debugsource = 1.2.28-7.2 xmlsec1-debugsource(armv7l-32) = 1.2.28-7.2 [ 110s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 110s] Processing files: xmlsec1-gcrypt-1.2.28-7.2.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Kk5tn0 [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd xmlsec1-1.2.28 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 110s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-gcrypt [ 110s] + exit 0 [ 110s] Provides: libxmlsec1-gcrypt.so.1 xmlsec1-gcrypt = 1.2.28-7.2 xmlsec1-gcrypt(armv7l-32) = 1.2.28-7.2 [ 110s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires(post): /sbin/ldconfig [ 110s] Requires(postun): /sbin/ldconfig [ 110s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxmlsec1.so.1 rtld(GNU_HASH) [ 110s] Processing files: xmlsec1-openssl-1.2.28-7.2.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.yGWAV6 [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd xmlsec1-1.2.28 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-openssl [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-openssl [ 110s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-openssl [ 110s] + exit 0 [ 110s] Provides: libxmlsec1-openssl.so.1 xmlsec1-openssl = 1.2.28-7.2 xmlsec1-openssl(armv7l-32) = 1.2.28-7.2 [ 110s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires(post): /sbin/ldconfig [ 110s] Requires(postun): /sbin/ldconfig [ 110s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.1 libcrypto.so.1.1(OPENSSL_1_1_0) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxmlsec1.so.1 rtld(GNU_HASH) [ 110s] Processing files: xmlsec1-devel-1.2.28-7.2.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.wJzUAd [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd xmlsec1-1.2.28 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-devel [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-devel [ 110s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-devel [ 110s] + exit 0 [ 111s] Provides: pkgconfig(xmlsec1) = 1.2.28 pkgconfig(xmlsec1-gcrypt) = 1.2.28 pkgconfig(xmlsec1-openssl) = 1.2.28 xmlsec1-devel = 1.2.28-7.2 xmlsec1-devel(armv7l-32) = 1.2.28-7.2 [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1 libxmlsec1-openssl.so.1 libxmlsec1.so.1 pkgconfig(libxml-2.0) >= 2.8.0 pkgconfig(libxslt) >= 1.0.20 [ 111s] Processing files: xmlsec1-devel-static-1.2.28-7.2.armv7l [ 111s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 111s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 111s] [ 111s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.dzwy5l [ 111s] + umask 022 [ 111s] + cd /home/abuild/rpmbuild/BUILD [ 111s] + cd xmlsec1-1.2.28 [ 111s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-devel-static [ 111s] + export LICENSEDIR [ 111s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-devel-static [ 111s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm/usr/share/licenses/xmlsec1-devel-static [ 111s] + exit 0 [ 111s] Provides: xmlsec1-devel-static = 1.2.28-7.2 xmlsec1-devel-static(armv7l-32) = 1.2.28-7.2 [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Processing files: xmlsec1-debuginfo-1.2.28-7.2.armv7l [ 111s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 111s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 111s] [ 111s] warning: File listed twice: /usr/lib/debug/.build-id [ 111s] Provides: xmlsec1-debuginfo = 1.2.28-7.2 xmlsec1-debuginfo(armv7l-32) = 1.2.28-7.2 [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.28-7.2.armv7l [ 111s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 111s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 111s] [ 111s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.28-7.2 xmlsec1-gcrypt-debuginfo(armv7l-32) = 1.2.28-7.2 [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Processing files: xmlsec1-openssl-debuginfo-1.2.28-7.2.armv7l [ 111s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 111s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 111s] [ 111s] Provides: xmlsec1-openssl-debuginfo = 1.2.28-7.2 xmlsec1-openssl-debuginfo(armv7l-32) = 1.2.28-7.2 [ 111s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 111s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm [ 111s] warning: Could not canonicalize hostname: obsnw03 [ 111s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-7.2.src.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.28-7.2.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.28-7.2.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.28-7.2.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.28-7.2.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.28-7.2.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.28-7.2.armv7l.rpm [ 113s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.28-7.2.armv7l.rpm [ 113s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.28-7.2.armv7l.rpm [ 113s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.28-7.2.armv7l.rpm [ 113s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.a7E7zu [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd xmlsec1-1.2.28 [ 113s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.2.arm [ 113s] + exit 0 [ 113s] ... checking for files with abuild user/group [ 113s] ... creating baselibs [ 114s] ... comparing built packages with the former built [ 114s] /usr/lib/build/pkg-diff.sh [ 114s] compare /.build.oldpackages/xmlsec1-1.2.28-7.1.src.rpm /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-7.2.src.rpm [ 114s] This is not a prerelease project. Compare the project name. [ 114s] comparing rpmtags [ 114s] comparing RELEASE [ 114s] comparing PROVIDES [ 114s] comparing scripts [ 114s] comparing filelist [ 114s] comparing file checksum [ 114s] RPM meta information is identical [ 114s] compare /.build.oldpackages/xmlsec1-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.28-7.2.armv7l.rpm [ 115s] Comparing xmlsec1-1.2.28-7.1.armv7l.rpm to xmlsec1-1.2.28-7.2.armv7l.rpm [ 115s] This is not a prerelease project. Compare the project name. [ 115s] comparing rpmtags [ 115s] comparing RELEASE [ 115s] comparing PROVIDES [ 115s] comparing scripts [ 115s] comparing filelist [ 115s] comparing file checksum [ 115s] creating rename script [ 115s] RPM file checksum differs. [ 115s] Extracting packages [ 115s] /usr/bin/xmlsec1: only difference was in build-id or gnu_debuglink, GOOD. [ 116s] /usr/lib/libxmlsec1.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 116s] Package content is identical [ 116s] compare /.build.oldpackages/xmlsec1-debuginfo-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.28-7.2.armv7l.rpm [ 116s] skipping -debuginfo package [ 116s] compare /.build.oldpackages/xmlsec1-debugsource-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.28-7.2.armv7l.rpm [ 117s] Comparing xmlsec1-debugsource-1.2.28-7.1.armv7l.rpm to xmlsec1-debugsource-1.2.28-7.2.armv7l.rpm [ 117s] This is not a prerelease project. Compare the project name. [ 117s] comparing rpmtags [ 117s] comparing RELEASE [ 117s] comparing PROVIDES [ 117s] comparing scripts [ 117s] comparing filelist [ 117s] comparing file checksum [ 117s] creating rename script [ 117s] RPM meta information is identical [ 117s] compare /.build.oldpackages/xmlsec1-devel-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.28-7.2.armv7l.rpm [ 117s] Comparing xmlsec1-devel-1.2.28-7.1.armv7l.rpm to xmlsec1-devel-1.2.28-7.2.armv7l.rpm [ 117s] This is not a prerelease project. Compare the project name. [ 117s] comparing rpmtags [ 117s] comparing RELEASE [ 117s] comparing PROVIDES [ 117s] comparing scripts [ 117s] comparing filelist [ 117s] comparing file checksum [ 117s] creating rename script [ 117s] RPM meta information is identical [ 117s] compare /.build.oldpackages/xmlsec1-devel-static-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.28-7.2.armv7l.rpm [ 118s] Comparing xmlsec1-devel-static-1.2.28-7.1.armv7l.rpm to xmlsec1-devel-static-1.2.28-7.2.armv7l.rpm [ 118s] This is not a prerelease project. Compare the project name. [ 118s] comparing rpmtags [ 118s] comparing RELEASE [ 118s] comparing PROVIDES [ 118s] comparing scripts [ 118s] comparing filelist [ 118s] comparing file checksum [ 118s] creating rename script [ 118s] RPM file checksum differs. [ 118s] Extracting packages [ 118s] /usr/lib/libxmlsec1_gcrypt_la-app.o differs in ELF section .comment [ 118s] --- /tmp/tmp.natSh27543/tmp.bJMjo27706 2019-08-26 06:48:17.641982747 +0000 [ 118s] +++ /tmp/tmp.natSh27543/tmp.snNSH27708 2019-08-26 06:48:17.645982740 +0000 [ 118s] @@ -4,5 +4,5 @@ [ 118s] Contents of section .comment: [ 118s] 0000 00474343 3a202854 697a656e 2f4c696e .GCC: (Tizen/Lin [ 118s] 0010 61726f20 47434320 362e322e 31203230 aro GCC 6.2.1 20 [ 118s] - 0020 31362e31 32203336 2e322920 362e322e 16.12 36.2) 6.2. [ 118s] + 0020 31362e31 32203337 2e342920 362e322e 16.12 37.4) 6.2. [ 118s] 0030 31203230 31363132 313300 1 20161213. [ 118s] compare /.build.oldpackages/xmlsec1-gcrypt-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.28-7.2.armv7l.rpm [ 118s] Comparing xmlsec1-gcrypt-1.2.28-7.1.armv7l.rpm to xmlsec1-gcrypt-1.2.28-7.2.armv7l.rpm [ 118s] This is not a prerelease project. Compare the project name. [ 118s] comparing rpmtags [ 118s] comparing RELEASE [ 118s] comparing PROVIDES [ 119s] comparing scripts [ 119s] comparing filelist [ 119s] comparing file checksum [ 119s] creating rename script [ 119s] RPM file checksum differs. [ 119s] Extracting packages [ 119s] /usr/lib/libxmlsec1-gcrypt.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 119s] Package content is identical [ 119s] compare /.build.oldpackages/xmlsec1-gcrypt-debuginfo-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.28-7.2.armv7l.rpm [ 119s] skipping -debuginfo package [ 119s] compare /.build.oldpackages/xmlsec1-openssl-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.28-7.2.armv7l.rpm [ 119s] Comparing xmlsec1-openssl-1.2.28-7.1.armv7l.rpm to xmlsec1-openssl-1.2.28-7.2.armv7l.rpm [ 119s] This is not a prerelease project. Compare the project name. [ 119s] comparing rpmtags [ 119s] comparing RELEASE [ 119s] comparing PROVIDES [ 119s] comparing scripts [ 120s] comparing filelist [ 120s] comparing file checksum [ 120s] creating rename script [ 120s] RPM file checksum differs. [ 120s] Extracting packages [ 120s] /usr/lib/libxmlsec1-openssl.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 120s] Package content is identical [ 120s] compare /.build.oldpackages/xmlsec1-openssl-debuginfo-1.2.28-7.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.28-7.2.armv7l.rpm [ 120s] skipping -debuginfo package [ 120s] [ 120s] obsnw03 finished "build xmlsec1.spec" at Mon Aug 26 06:48:19 UTC 2019. [ 120s] Retried build at Sun Sep 1 14:50:47 2019 returned same result, skipped