[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_6 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obsnw02 started "build _service:gbs:perl-WWW-Curl.spec" at Tue Oct 8 20:22:33 UTC 2019. [ 0s] [ 0s] Building perl-WWW-Curl for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '2e37ea865470cbffdff6d7dc39bf34cb' [ 0s] [ 0s] processing recipe /var/cache/build/root_6/.build-srcdir/_service:gbs:perl-WWW-Curl.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_6/.build-srcdir/_service:gbs:perl-WWW-Curl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_6/.build.rpmlist /var/cache/build/root_6/.build-srcdir/_service:gbs:perl-WWW-Curl.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/6/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling libgcc... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [27/40] preinstalling coreutils... [ 6s] [28/40] preinstalling libacl... [ 6s] [29/40] preinstalling libblkid... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 7s] [34/40] preinstalling libmount... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-aarch64 postinstall script [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 7s] [1/108] installing libmagic-data-5.37-16.27 [ 7s] [2/108] installing setup-0.9-9.27 [ 7s] [3/108] installing filesystem-3.1-8.1 [ 8s] [4/108] installing glibc-2.24-17.21 [ 8s] [5/108] installing bash-3.2.57-6.4 [ 8s] [6/108] installing binutils-2.27-14.54 [ 8s] [7/108] installing cpio-2.11-3.4 [ 9s] [8/108] installing diffutils-3.3-3.4 [ 9s] [9/108] installing findutils-4.3.8-6.129 [ 9s] [10/108] installing gdbm-1.8.3-4.18 [ 9s] [11/108] installing hostname-3.20-5.4 [ 9s] [12/108] installing libatomic-6.2.1-39.2 [ 9s] [13/108] installing libattr-2.4.47-5.378 [ 10s] [14/108] installing libbz2-1.0.6-5.79 [ 10s] [15/108] installing libcap-2.24-4.581 [ 10s] [16/108] installing libcares-1.12.0-6.1 [ 10s] [17/108] installing libcurl-extension-dlp-7.62.0-12.1 [ 10s] [18/108] installing libelf-0.153-3.201 [ 11s] [19/108] installing libext2fs-1.43.4-6.2 [ 11s] [20/108] installing libfreebl3-3.34.1-5.316 [ 11s] [21/108] installing libgcc-6.2.1-39.2 [ 12s] [22/108] installing libgomp-6.2.1-39.2 [ 12s] [23/108] installing libitm-6.2.1-39.2 [ 12s] [24/108] installing libltdl-2.4.2-5.41 [ 12s] [25/108] installing liblua-5.1.5-5.34 [ 13s] [26/108] installing liblzma-5.2.4-6.145 [ 13s] [27/108] installing libopenssl-1.0.2t-15.1 [ 13s] [28/108] installing libopenssl11-1.1.1d-7.12 [ 14s] [29/108] installing libpcre-8.43-7.3 [ 14s] [30/108] installing libpopt-1.16-4.92 [ 14s] [31/108] installing libsmack-1.3.1-5.227 [ 15s] [32/108] installing libsmartcols-2.30-13.28 [ 15s] [33/108] installing libsqlite-3.29.0-16.13 [ 15s] [34/108] installing libuuid-2.30-13.28 [ 15s] [35/108] installing m4-1.4.17-3.4 [ 16s] [36/108] installing net-tools-2.0_20121208git-3.2 [ 16s] [37/108] installing nghttp2-1.34.0-9.1 [ 16s] [38/108] installing nspr-4.12-4.72 [ 16s] [39/108] installing patch-2.7-3.92 [ 16s] [40/108] installing pkg-config-0.28-5.532 [ 16s] [41/108] installing sed-4.1c-4.4 [ 16s] [42/108] installing update-alternatives-1.18.15-4.4 [ 16s] [43/108] installing which-2.20-6.4 [ 16s] [44/108] installing zlib-1.2.11-5.278 [ 17s] [45/108] installing build-compare-2015.04.28-3.256 [ 17s] [46/108] installing qemu-linux-user-x86_64-cross-2.7.0-1.5.1 [ 18s] [47/108] installing terminfo-base-full-6.1-11.132 [ 18s] [48/108] installing coreutils-6.9-3.36 [ 18s] [49/108] installing cpp-6.2.1-39.2 [ 19s] [50/108] installing gawk-3.1.5-5.5 [ 19s] [51/108] installing gcc-c++-6.2.1-39.2 [ 19s] [52/108] installing grep-2.5.2-6.4 [ 20s] [53/108] installing libacl-2.2.52-5.396 [ 20s] [54/108] installing libasm-0.153-3.201 [ 20s] [55/108] installing libblkid-2.30-13.28 [ 20s] [56/108] installing libstdc++-6.2.1-39.2 [ 20s] [57/108] installing make-4.0-4.105 [ 21s] [58/108] installing nss-certs-3.34.1-5.316 [ 21s] [59/108] installing smack-1.3.1-5.227 [ 21s] [60/108] installing bzip2-1.0.6-5.79 [ 21s] [61/108] installing libgfortran-6.2.1-39.2 [ 21s] [62/108] installing libmagic-5.37-16.27 [ 21s] [63/108] installing libxml2-2.9.7-7.67 [ 22s] [64/108] installing xz-5.2.4-6.145 [ 22s] [65/108] installing libdw-0.153-3.201 [ 22s] [66/108] installing libstdc++-devel-6.2.1-39.2 [ 22s] [67/108] installing file-5.37-16.27 [ 22s] [68/108] installing libmount-2.30-13.28 [ 23s] [69/108] installing linux-glibc-devel-3.10-4.226 [ 23s] [70/108] installing tar-1.17-4.4 [ 23s] [71/108] installing db4-4.8.30.NC-3.581 [ 23s] [72/108] installing glibc-locale-2.24-17.21 [ 24s] [73/108] installing gzip-1.3.12-7.351 [ 24s] [74/108] installing libcc1-6.2.1-39.2 [ 24s] [75/108] installing libfdisk-2.30-13.28 [ 25s] [76/108] installing libubsan-6.2.1-39.2 [ 25s] [77/108] installing pam-1.1.6-8.2 [ 25s] [78/108] installing libicu-63.2-13.1 [ 26s] [79/108] installing libncurses6-6.1-11.132 [ 27s] [80/108] installing tzdata-2019a-11.1 [ 27s] [81/108] installing elfutils-0.153-3.201 [ 27s] [82/108] installing libncurses-6.1-11.132 [ 27s] [83/108] installing glibc-devel-2.24-17.21 [ 27s] [84/108] installing less-466-8.9 [ 27s] [85/108] installing libreadline-5.2-5.77 [ 28s] [86/108] installing procps-ng-3.3.15-8.4 [ 28s] [87/108] installing perl-5.30.0-10.2 [ 30s] [88/108] installing libcurl-7.62.0-12.1 [ 30s] [89/108] installing gcc-6.2.1-39.2 [ 31s] [90/108] installing build-mkbaselibs-20120927-3.1 [ 31s] [91/108] installing perl-Devel-Symdump-2.08-5.5 [ 31s] [92/108] installing qemu-accel-x86_64-aarch64-0.4-15.2 [ 36s] [93/108] installing autoconf-2.69-5.195 [ 36s] [94/108] installing libcares-devel-1.12.0-6.1 [ 36s] [95/108] installing zlib-devel-1.2.11-5.278 [ 36s] [96/108] installing libcurl-devel-7.62.0-12.1 [ 36s] [97/108] installing util-linux-2.30-13.28 [ 37s] [98/108] installing perl-Pod-Coverage-0.22-4.2 [ 37s] [99/108] installing automake-1.15.1-6.311 [ 37s] [100/108] installing libopenssl-devel-1.0.2t-15.1 [ 37s] [101/108] installing util-linux-su-2.30-13.28 [ 37s] [102/108] installing build-20120927-3.1 [ 37s] [103/108] installing perl-Test-Pod-Coverage-1.08-4.2 [ 37s] [104/108] installing libtool-2.4.2-5.41 [ 37s] [105/108] installing nss-3.34.1-5.316 [ 37s] [106/108] installing libsoftokn3-3.34.1-5.316 [ 38s] [107/108] installing rpm-4.11.0.1-14.42 [ 38s] [108/108] installing rpm-build-4.11.0.1-14.42 [ 38s] removing nis flags from /var/cache/build/root_6/etc/nsswitch.conf... [ 38s] now finalizing build dir... [ 38s] Running build time source services... [ 39s] Warning: spec file parser line 24: can't expand %(...) [ 39s] Warning: spec file parser line 30: can't expand %(...) [ 39s] build target is aarch64-tizen-linux [ 39s] ----------------------------------------------------------------- [ 39s] I have the following modifications for perl-WWW-Curl.spec: [ 39s] 18c18 [ 39s] < release: 4.1 [ 39s] --- [ 39s] > release: 3.2 [ 39s] ----------------------------------------------------------------- [ 39s] ----- building perl-WWW-Curl.spec (user abuild) [ 39s] ----------------------------------------------------------------- [ 39s] ----------------------------------------------------------------- [ 39s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/2e37ea865470cbffdff6d7dc39bf34cb-perl-WWW-Curl' -ba /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.spec [ 39s] Building target platforms: aarch64-tizen-linux [ 39s] Building for target aarch64-tizen-linux [ 39s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Ac8CiR [ 39s] + umask 022 [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + rm -rf perl-WWW-Curl-4.05 [ 39s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl-4.05.tar.bz2 [ 39s] + /bin/tar -xvvf - [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/ [ 39s] -rw-rw-r-- root/root 11915 2019-03-11 01:50 perl-WWW-Curl-4.05/Changes [ 39s] -rw-rw-r-- root/root 31779 2019-03-11 01:50 perl-WWW-Curl-4.05/Curl.xs [ 39s] -rw-rw-r-- root/root 255 2019-03-11 01:50 perl-WWW-Curl-4.05/LICENSE [ 39s] -rw-rw-r-- root/root 963 2019-03-11 01:50 perl-WWW-Curl-4.05/MANIFEST [ 39s] -rw-rw-r-- root/root 487 2019-03-11 01:50 perl-WWW-Curl-4.05/META.yml [ 39s] -rw-rw-r-- root/root 8543 2019-03-11 01:50 perl-WWW-Curl-4.05/Makefile.PL [ 39s] -rw-rw-r-- root/root 2475 2019-03-11 01:50 perl-WWW-Curl-4.05/README [ 39s] -rw-rw-r-- root/root 673 2019-03-11 01:50 perl-WWW-Curl-4.05/README.Win32 [ 39s] -rw-rw-r-- root/root 4168 2019-03-11 01:50 perl-WWW-Curl-4.05/SIGNATURE [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/ [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/ [ 39s] -rw-rw-r-- root/root 8549 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install.pm [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install/ [ 39s] -rw-rw-r-- root/root 1053 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install/Base.pm [ 39s] -rw-rw-r-- root/root 1788 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install/Can.pm [ 39s] -rw-rw-r-- root/root 1530 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install/External.pm [ 39s] -rw-rw-r-- root/root 1094 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install/MakeMaker.pm [ 39s] -rw-rw-r-- root/root 6225 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install/Makefile.pm [ 39s] -rw-rw-r-- root/root 9448 2019-03-11 01:50 perl-WWW-Curl-4.05/inc/Module/Install/Metadata.pm [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/ [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/WWW/ [ 39s] -rw-rw-r-- root/root 10200 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/WWW/Curl.pm [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/WWW/Curl/ [ 39s] -rw-rw-r-- root/root 5242 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/WWW/Curl/Easy.pm [ 39s] -rw-rw-r-- root/root 187 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/WWW/Curl/Form.pm [ 39s] -rw-rw-r-- root/root 367 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/WWW/Curl/Multi.pm [ 39s] -rw-rw-r-- root/root 1018 2019-03-11 01:50 perl-WWW-Curl-4.05/lib/WWW/Curl/Share.pm [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/packaging/ [ 39s] -rw-rw-r-- root/root 69 2019-03-11 01:50 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.manifest [ 39s] -rw-rw-r-- root/root 4001 2019-03-11 01:50 perl-WWW-Curl-4.05/packaging/perl-WWW-Curl.spec [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/t/ [ 39s] -rw-rw-r-- root/root 152 2019-03-11 01:50 perl-WWW-Curl-4.05/t/00constants.t [ 39s] -rw-rw-r-- root/root 1630 2019-03-11 01:50 perl-WWW-Curl-4.05/t/01basic.t [ 39s] -rw-rw-r-- root/root 1192 2019-03-11 01:50 perl-WWW-Curl-4.05/t/02callbacks.t [ 39s] -rw-rw-r-- root/root 1049 2019-03-11 01:50 perl-WWW-Curl-4.05/t/04abort-test.t [ 39s] -rw-rw-r-- root/root 1716 2019-03-11 01:50 perl-WWW-Curl-4.05/t/05progress.t [ 39s] -rw-rw-r-- root/root 1827 2019-03-11 01:50 perl-WWW-Curl-4.05/t/06http-post.t [ 39s] -rw-rw-r-- root/root 2103 2019-03-11 01:50 perl-WWW-Curl-4.05/t/07ftp-upload.t [ 39s] -rw-rw-r-- root/root 3243 2019-03-11 01:50 perl-WWW-Curl-4.05/t/08ssl.t [ 39s] -rw-rw-r-- root/root 1978 2019-03-11 01:50 perl-WWW-Curl-4.05/t/09times.t [ 39s] -rw-rw-r-- root/root 1284 2019-03-11 01:50 perl-WWW-Curl-4.05/t/10errbuf.t [ 39s] -rw-rw-r-- root/root 1133 2019-03-11 01:50 perl-WWW-Curl-4.05/t/13slowleak.t [ 39s] -rw-rw-r-- root/root 2178 2019-03-11 01:50 perl-WWW-Curl-4.05/t/14duphandle.t [ 39s] -rw-rw-r-- root/root 3153 2019-03-11 01:50 perl-WWW-Curl-4.05/t/15duphandle-callback.t [ 39s] -rw-rw-r-- root/root 2043 2019-03-11 01:50 perl-WWW-Curl-4.05/t/16formpost.t [ 39s] -rw-rw-r-- root/root 2236 2019-03-11 01:50 perl-WWW-Curl-4.05/t/17slist.t [ 39s] -rw-rw-r-- root/root 1547 2019-03-11 01:50 perl-WWW-Curl-4.05/t/18twinhandles.t [ 39s] -rw-rw-r-- root/root 134 2019-03-11 01:50 perl-WWW-Curl-4.05/t/meta.t [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/ [ 39s] -rw-rw-r-- root/root 95 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/00constants.t [ 39s] -rw-rw-r-- root/root 407 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/01basic.t [ 39s] -rw-rw-r-- root/root 456 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/02header-callback.t [ 39s] -rw-rw-r-- root/root 454 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/03body-callback.t [ 39s] -rw-rw-r-- root/root 422 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/04abort.t [ 39s] -rw-rw-r-- root/root 668 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/05progress.t [ 39s] -rw-rw-r-- root/root 727 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/06http-post.t [ 39s] -rw-rw-r-- root/root 205 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/07errbuf.t [ 39s] -rw-rw-r-- root/root 443 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/08duphandle.t [ 39s] -rw-rw-r-- root/root 489 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/09duphandle-callback.t [ 39s] -rw-rw-r-- root/root 1269 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/10multi-callback.t [ 39s] -rw-rw-r-- root/root 381 2019-03-11 01:50 perl-WWW-Curl-4.05/t/new/README [ 39s] -rw-rw-r-- root/root 232 2019-03-11 01:50 perl-WWW-Curl-4.05/t/pod-coverage.t [ 39s] -rw-rw-r-- root/root 140 2019-03-11 01:50 perl-WWW-Curl-4.05/t/pod.t [ 39s] drwxrwxr-x root/root 0 2019-03-11 01:50 perl-WWW-Curl-4.05/template/ [ 39s] -rw-rw-r-- root/root 1095 2019-03-11 01:50 perl-WWW-Curl-4.05/template/Easy.pm.tmpl [ 39s] -rw-rw-r-- root/root 763 2019-03-11 01:50 perl-WWW-Curl-4.05/template/Share.pm.tmpl [ 39s] -rw-rw-r-- root/root 110 2019-03-11 01:50 perl-WWW-Curl-4.05/typemap [ 39s] + STATUS=0 [ 39s] + '[' 0 -ne 0 ']' [ 39s] + cd perl-WWW-Curl-4.05 [ 39s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 39s] + cp /home/abuild/rpmbuild/SOURCES/perl-WWW-Curl.manifest . [ 39s] + chmod -R u+w /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 39s] + exit 0 [ 39s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.820C8X [ 39s] + umask 022 [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + cd perl-WWW-Curl-4.05 [ 39s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 39s] + ref=/usr/lib/rpm [ 39s] + for s in guess sub [ 39s] ++ find -maxdepth 8 -name config.guess [ 39s] + for s in guess sub [ 39s] ++ find -maxdepth 8 -name config.sub [ 39s] + LANG=C [ 39s] + export LANG [ 39s] + unset DISPLAY [ 39s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 39s] + export CFLAGS [ 39s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -std=gnu++11' [ 39s] + export CXXFLAGS [ 39s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 39s] + export FFLAGS [ 39s] + LDFLAGS= [ 39s] + export LDFLAGS [ 39s] + grep -rsl '^#!.*perl' . [ 39s] + grep -v '.bak$' [ 39s] + xargs --no-run-if-empty /bin/perl -MExtUtils::MakeMaker -e 'MY->fixin(@ARGV)' [ 40s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 40s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr| if $ExtUtils::MakeMaker::VERSION =~ /5\.9[1-6]|6\.0[0-5]/ ' [ 41s] + /bin/perl -I. Makefile.PL [ 42s] Locating required external dependency bin:curl-config... found at /bin/curl-config. [ 42s] Found curl.h in /usr/include/curl/curl.h [ 42s] Building curlopt-constants.c for your libcurl version [ 42s] Building Easy.pm constants for your libcurl version [ 42s] Building Share.pm constants for your libcurl version [ 43s] Checking if your kit is complete... [ 43s] Looks good [ 43s] Generating a Unix-style Makefile [ 43s] Writing Makefile for WWW::Curl [ 43s] Writing MYMETA.yml and MYMETA.json [ 43s] + /bin/make [ 46s] cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm [ 46s] AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy) [ 46s] cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm [ 46s] cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm [ 46s] AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share) [ 46s] cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm [ 46s] cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm [ 46s] Running Mkbootstrap for Curl () [ 46s] chmod 644 "Curl.bs" [ 46s] "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644 [ 47s] "/usr/bin/perl" "-Iinc" "/usr/lib64/perl5/5.30.0/ExtUtils/xsubpp" -typemap '/usr/lib64/perl5/5.30.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05/typemap' Curl.xs > Curl.xsc [ 47s] mv Curl.xsc Curl.c [ 47s] cc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/usr/lib64/perl5/5.30.0/aarch64-linux-thread-multi/CORE" Curl.c [ 48s] Curl.xs: In function 'fwrite_wrapper2': [ 48s] Curl.xs:341:13: warning: unused variable 'sv' [-Wunused-variable] [ 48s] SV *sv; [ 48s] ^~ [ 48s] In file included from Curl.xs:16:0: [ 48s] Curl.c: In function 'XS_WWW__Curl__Easy_init': [ 48s] /usr/lib64/perl5/5.30.0/aarch64-linux-thread-multi/CORE/XSUB.h:185:20: warning: unused variable 'ix' [-Wunused-variable] [ 48s] #define dXSI32 I32 ix = XSANY.any_i32 [ 48s] ^ [ 48s] /usr/lib64/perl5/5.30.0/aarch64-linux-thread-multi/CORE/XSUB.h:185:20: note: in definition of macro 'dXSI32' [ 48s] #define dXSI32 I32 ix = XSANY.any_i32 [ 48s] ^~ [ 48s] Curl.c: In function 'XS_WWW__Curl__Easy_internal_setopt': [ 48s] Curl.c:1068:6: warning: unused variable 'value' [-Wunused-variable] [ 48s] int value = (int)SvIV(ST(2)) [ 48s] ^~~~~ [ 48s] Curl.c:1066:6: warning: unused variable 'option' [-Wunused-variable] [ 48s] int option = (int)SvIV(ST(1)) [ 48s] ^~~~~~ [ 48s] Curl.c:1065:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 48s] WWW__Curl__Easy self; [ 48s] ^~~~ [ 48s] Curl.c: In function 'XS_WWW__Curl__Easy_cleanup': [ 48s] Curl.c:1224:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 48s] WWW__Curl__Easy self; [ 48s] ^~~~ [ 48s] Curl.c: In function 'XS_WWW__Curl__Easy_strerror': [ 48s] Curl.c:1295:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 48s] WWW__Curl__Easy self; [ 48s] ^~~~ [ 48s] Curl.c: In function 'XS_WWW__Curl__Form_add': [ 48s] Curl.c:1369:9: warning: unused variable 'value' [-Wunused-variable] [ 48s] char * value = (char *)SvPV_nolen(ST(2)) [ 48s] ^~~~~ [ 48s] Curl.c:1367:9: warning: unused variable 'name' [-Wunused-variable] [ 48s] char * name = (char *)SvPV_nolen(ST(1)) [ 48s] ^~~~ [ 48s] Curl.c:1366:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 48s] WWW__Curl__Form self; [ 48s] ^~~~ [ 48s] Curl.c: In function 'XS_WWW__Curl__Form_addfile': [ 48s] Curl.c:1406:9: warning: unused variable 'type' [-Wunused-variable] [ 48s] char * type = (char *)SvPV_nolen(ST(3)) [ 48s] ^~~~ [ 48s] Curl.c:1404:9: warning: unused variable 'description' [-Wunused-variable] [ 48s] char * description = (char *)SvPV_nolen(ST(2)) [ 48s] ^~~~~~~~~~~ [ 48s] Curl.c:1402:9: warning: unused variable 'filename' [-Wunused-variable] [ 48s] char * filename = (char *)SvPV_nolen(ST(1)) [ 48s] ^~~~~~~~ [ 48s] Curl.c:1401:18: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 48s] WWW__Curl__Form self; [ 48s] ^~~~ [ 48s] Curl.c: In function 'XS_WWW__Curl__Multi_strerror': [ 48s] Curl.c:1712:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 48s] WWW__Curl__Multi self; [ 48s] ^~~~ [ 48s] Curl.c: In function 'XS_WWW__Curl__Share_strerror': [ 48s] Curl.c:1881:19: warning: variable 'self' set but not used [-Wunused-but-set-variable] [ 48s] WWW__Curl__Share self; [ 48s] ^~~~ [ 49s] rm -f blib/arch/auto/WWW/Curl/Curl.so [ 49s] LD_RUN_PATH="/lib/../lib64" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -L/usr/local/lib -fstack-protector-strong Curl.o -o blib/arch/auto/WWW/Curl/Curl.so \ [ 49s] -lcurl -lcares -lnghttp2 -ldl -licuuc -licudata -lssl -lcrypto -lz \ [ 49s] [ 49s] chmod 755 blib/arch/auto/WWW/Curl/Curl.so [ 50s] Manifying 1 pod document [ 50s] + exit 0 [ 50s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.3g8olD [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd perl-WWW-Curl-4.05 [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 50s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 50s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 '!=' / ']' [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 50s] ++ /bin/perl -MExtUtils::MakeMaker -e ' print $ExtUtils::MakeMaker::VERSION <= 6.05 ? qq|PREFIX=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr| : qq|DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64| ' [ 51s] + /bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr bindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/etc datadir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64 libexecdir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/com mandir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/info install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 51s] "/usr/bin/perl" "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644 [ 52s] Manifying 1 pod document [ 52s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Curl.so [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Form.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Multi.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Share.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Easy.pm [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix [ 52s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/man/man3/WWW::Curl.3 [ 52s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/5.30.0/aarch64-linux-thread-multi/perllocal.pod [ 53s] + cmd=/usr/share/spec-helper/compress_files [ 53s] + '[' -x /usr/share/spec-helper/compress_files ']' [ 53s] + cmd=/usr/lib/rpm/brp-compress [ 53s] + '[' -x /usr/lib/rpm/brp-compress ']' [ 53s] + /usr/lib/rpm/brp-compress [ 53s] + '[' -e /etc/SuSE-release -o -e /etc/UnitedLinux-release ']' [ 53s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 -name perllocal.pod -o -name .packlist -o -name '*.bs' [ 53s] + xargs -i rm -f '{}' [ 53s] + find /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr -type d -depth -exec rmdir '{}' ';' [ 53s] + /bin/perl -MFile::Find -le ' [ 53s] find({ wanted => \&wanted, no_chdir => 1}, "/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64"); [ 53s] print "%doc README.Win32 template inc Changes README LICENSE"; [ 53s] for my $x (sort @dirs, @files) { [ 53s] push @ret, $x unless indirs($x); [ 53s] } [ 53s] print join "\n", sort @ret; [ 53s] [ 53s] sub wanted { [ 53s] return if /auto$/; [ 53s] [ 53s] local $_ = $File::Find::name; [ 53s] my $f = $_; s|^\Q/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64\E||; [ 53s] return unless length; [ 53s] return $files[@files] = $_ if -f $f; [ 53s] [ 53s] $d = $_; [ 53s] /\Q$d\E/ && return for reverse sort @INC; [ 53s] $d =~ /\Q$_\E/ && return [ 53s] for qw|/etc /usr/man /usr/bin /usr/share|; [ 53s] [ 53s] $dirs[@dirs] = $_; [ 53s] } [ 53s] [ 53s] sub indirs { [ 53s] my $x = shift; [ 53s] $x =~ /^\Q$_\E\// && $x ne $_ && return 1 for @dirs; [ 53s] } [ 53s] ' [ 53s] + '[' -z WWW-Curl-4.05-filelist ']' [ 53s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05 [ 53s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Curl.so [ 53s] cpio: glibc-2.24/csu: Cannot stat: No such file or directory [ 53s] cpio: glibc-2.24/sysdeps/aarch64/crti.S: Cannot stat: No such file or directory [ 53s] cpio: glibc-2.24/sysdeps/aarch64/crtn.S: Cannot stat: No such file or directory [ 53s] 230 blocks [ 53s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05/perl-WWW-Curl-debuginfo.manifest [ 53s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-WWW-Curl-4.05/perl-WWW-Curl-debugsource.manifest [ 53s] + /usr/lib/rpm/check-buildroot [ 54s] + /usr/lib/rpm//brp-compress [ 54s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 54s] + /usr/lib/rpm/brp-python-hardlink [ 54s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 54s] Processing files: perl-WWW-Curl-4.05-3.2.aarch64 [ 54s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 54s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 54s] [ 54s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.wxO34t [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd perl-WWW-Curl-4.05 [ 54s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + export DOCDIR [ 54s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + cp -pr README.Win32 /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + cp -pr template /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + cp -pr inc /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64/usr/share/doc/packages/perl-WWW-Curl [ 54s] + exit 0 [ 55s] Provides: Curl.so()(64bit) perl(Module::Install) = 0.75 perl(Module::Install::Base) = 0.75 perl(Module::Install::Base::FakeAdmin) perl(Module::Install::Can) = 0.75 perl(Module::Install::External) = 0.75 perl(Module::Install::MakeMaker) = 0.75 perl(Module::Install::Makefile) = 0.75 perl(Module::Install::Metadata) = 0.75 perl(WWW::Curl) = 4.05 perl(WWW::Curl::Easy) = 4.05 perl(WWW::Curl::Form) perl(WWW::Curl::Multi) perl(WWW::Curl::Share) perl-WWW-Curl = 4.05-3.2 perl-WWW-Curl(aarch-64) = 4.05-3.2 [ 55s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 55s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcurl.so.4()(64bit) libcurl.so.4(CURL_OPENSSL_4)(64bit) [ 55s] Processing files: perl-WWW-Curl-debugsource-4.05-3.2.aarch64 [ 55s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 55s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 55s] [ 55s] Provides: perl-WWW-Curl-debugsource = 4.05-3.2 perl-WWW-Curl-debugsource(aarch-64) = 4.05-3.2 [ 55s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 55s] Processing files: perl-WWW-Curl-debuginfo-4.05-3.2.aarch64 [ 55s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 55s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 55s] [ 55s] Provides: perl-WWW-Curl-debuginfo = 4.05-3.2 perl-WWW-Curl-debuginfo(aarch-64) = 4.05-3.2 [ 55s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 55s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 55s] warning: Could not canonicalize hostname: obsnw02 [ 55s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-3.2.src.rpm [ 55s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-WWW-Curl-4.05-3.2.aarch64.rpm [ 55s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-WWW-Curl-debugsource-4.05-3.2.aarch64.rpm [ 55s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-WWW-Curl-debuginfo-4.05-3.2.aarch64.rpm [ 55s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.NF3Xj6 [ 55s] + umask 022 [ 55s] + cd /home/abuild/rpmbuild/BUILD [ 55s] + cd perl-WWW-Curl-4.05 [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 55s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 '!=' / ']' [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-WWW-Curl-4.05-3.2.aarch64 [ 55s] + exit 0 [ 55s] ... checking for files with abuild user/group [ 55s] ... creating baselibs [ 56s] ... comparing built packages with the former built [ 56s] /usr/lib/build/pkg-diff.sh [ 56s] compare /.build.oldpackages/perl-WWW-Curl-4.05-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/perl-WWW-Curl-4.05-3.2.src.rpm [ 56s] This is not a prerelease project. Compare the project name. [ 56s] comparing rpmtags [ 56s] comparing RELEASE [ 56s] comparing PROVIDES [ 56s] comparing scripts [ 56s] comparing filelist [ 56s] comparing file checksum [ 56s] RPM meta information is identical [ 56s] compare /.build.oldpackages/perl-WWW-Curl-4.05-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/perl-WWW-Curl-4.05-3.2.aarch64.rpm [ 56s] Comparing perl-WWW-Curl-4.05-3.1.aarch64.rpm to perl-WWW-Curl-4.05-3.2.aarch64.rpm [ 56s] This is not a prerelease project. Compare the project name. [ 56s] comparing rpmtags [ 56s] comparing RELEASE [ 56s] comparing PROVIDES [ 56s] comparing scripts [ 56s] comparing filelist [ 56s] --- /tmp/tmp.CYXWRc6755/tmp.UIYodu6810 2019-10-08 20:23:29.921124624 +0000 [ 56s] +++ /tmp/tmp.CYXWRc6755/tmp.Eezjnl6816 2019-10-08 20:23:29.933124734 +0000 [ 56s] @@ -1,17 +1,17 @@ [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/WWW 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/WWW/Curl 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/WWW/Curl.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/WWW/Curl/Easy.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/WWW/Curl/Form.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/WWW/Curl/Multi.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/WWW/Curl/Share.pm 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/auto/WWW 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/auto/WWW/Curl 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/auto/WWW/Curl/Curl.so 0 (none) 100555 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/auto/WWW/Curl/Easy 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix 0 (none) 100444 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/auto/WWW/Curl/Share 0 (none) 40755 root root 0 4294967295 [ 56s] -/usr/lib64/perl5/site_perl/5.26.0/aarch64-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Easy.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Form.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Multi.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/WWW/Curl/Share.pm 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Curl.so 0 (none) 100555 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Easy 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Easy/autosplit.ix 0 (none) 100444 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Share 0 (none) 40755 root root 0 4294967295 [ 56s] +/usr/lib64/perl5/site_perl/5.30.0/aarch64-linux-thread-multi/auto/WWW/Curl/Share/autosplit.ix 0 (none) 100444 root root 0 4294967295 [ 56s] /usr/share/doc/packages/perl-WWW-Curl 0 (none) 40755 root root 0 4294967295 [ 56s] /usr/share/doc/packages/perl-WWW-Curl/Changes 2 (none) 100644 root root 0 4294967295 [ 56s] /usr/share/doc/packages/perl-WWW-Curl/LICENSE 2 (none) 100644 root root 0 4294967295 [ 56s] @@ -30,5 +30,5 @@ [ 56s] /usr/share/doc/packages/perl-WWW-Curl/template 0 (none) 40755 root root 0 4294967295 [ 56s] /usr/share/doc/packages/perl-WWW-Curl/template/Easy.pm.tmpl 2 (none) 100644 root root 0 4294967295 [ 56s] /usr/share/doc/packages/perl-WWW-Curl/template/Share.pm.tmpl 2 (none) 100644 root root 0 4294967295 [ 56s] -/usr/share/man/man3/WWW::Curl.3pm.gz 2 (none) 100444 root root 0 4294967295 [ 56s] +/usr/share/man/man3/WWW::Curl.3.gz 2 (none) 100444 root root 0 4294967295 [ 56s] [ 56s] RPM meta information is different [ 56s] compare /.build.oldpackages/perl-WWW-Curl-debuginfo-4.05-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/perl-WWW-Curl-debuginfo-4.05-3.2.aarch64.rpm [ 56s] skipping -debuginfo package [ 56s] compare /.build.oldpackages/perl-WWW-Curl-debugsource-4.05-3.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/perl-WWW-Curl-debugsource-4.05-3.2.aarch64.rpm [ 57s] Comparing perl-WWW-Curl-debugsource-4.05-3.1.aarch64.rpm to perl-WWW-Curl-debugsource-4.05-3.2.aarch64.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] comparing RELEASE [ 57s] comparing PROVIDES [ 57s] comparing scripts [ 57s] comparing filelist [ 57s] comparing file checksum [ 57s] creating rename script [ 57s] RPM file checksum differs. [ 57s] Extracting packages [ 57s] /usr/src/debug/perl-WWW-Curl-4.05/Curl.c differs (C source, ASCII text) [ 57s] --- old//usr/src/debug/perl-WWW-Curl-4.05/Curl.c 2019-03-11 04:13:30.000000000 +0000 [ 57s] +++ new//usr/src/debug/perl-WWW-Curl-4.05/Curl.c 2019-10-08 20:23:20.000000000 +0000 [ 57s] @@ -1,5 +1,5 @@ [ 57s] /* [ 57s] - * This file was generated automatically by ExtUtils::ParseXS version 3.34 from the [ 57s] + * This file was generated automatically by ExtUtils::ParseXS version 3.40 from the [ 57s] * contents of Curl.xs. Do not edit this file, edit Curl.xs instead. [ 57s] * [ 57s] * ANY CHANGES MADE HERE WILL BE LOST! [ 57s] @@ -748,6 +748,7 @@ [ 57s] dVAR; dXSARGS; [ 57s] dXSI32; [ 57s] PERL_UNUSED_VAR(cv); /* -W */ [ 57s] + PERL_UNUSED_VAR(items); /* -W */ [ 57s] PERL_UNUSED_VAR(ax); /* -Wall */ [ 57s] SP -= items; [ 57s] { [ 57s] @@ -755,7 +756,7 @@ [ 57s] perl_curl_easy *self; [ 57s] char *sclass = "WWW::Curl::Easy"; [ 57s] [ 57s] -#line 759 "Curl.c" [ 57s] +#line 760 "Curl.c" [ 57s] #line 592 "Curl.xs" [ 57s] if (items>0 && !SvROK(ST(0))) { [ 57s] STRLEN dummy; [ 57s] @@ -782,7 +783,7 @@ [ 57s] curl_easy_setopt(self->curl, CURLOPT_ERRORBUFFER, self->errbuf); [ 57s] [ 57s] XSRETURN(1); [ 57s] -#line 786 "Curl.c" [ 57s] +#line 787 "Curl.c" [ 57s] PUTBACK; [ 57s] return; [ 57s] } [ 57s] @@ -804,7 +805,7 @@ [ 57s] char *sclass = "WWW::Curl::Easy"; [ 57s] perl_curl_easy_callback_code i; [ 57s] [ 57s] -#line 808 "Curl.c" [ 57s] +#line 809 "Curl.c" [ 57s] [ 57s] if (SvROK(ST(0)) && sv_derived_from(ST(0), "WWW::Curl::Easy")) { [ 57s] IV tmp = SvIV((SV*)SvRV(ST(0))); [ 57s] @@ -854,7 +855,7 @@ [ 57s] }; [ 57s] [ 57s] XSRETURN(1); [ 57s] -#line 858 "Curl.c" [ 57s] +#line 859 "Curl.c" [ 57s] PUTBACK; [ 57s] return; [ 57s] } [ 57s] @@ -866,12 +867,13 @@ [ 57s] { [ 57s] dVAR; dXSARGS; [ 57s] PERL_UNUSED_VAR(cv); /* -W */ [ 57s] + PERL_UNUSED_VAR(items); /* -W */ [ 57s] { [ 57s] char * RETVAL; [ 57s] dXSTARG; [ 57s] #line 669 "Curl.xs" [ 57s] RETVAL=curl_version(); [ 57s] -#line 875 "Curl.c" [ 57s] +#line 877 "Curl.c" [ 57s] sv_setpv(TARG, RETVAL); XSprePUSH; PUSHTARG; [ 57s] } [ 57s] XSRETURN(1); [ 57s] @@ -1046,7 +1048,7 @@ [ 57s] ; [ 57s] break; [ 57s] }; [ 57s] -#line 1050 "Curl.c" [ 57s] +#line 1052 "Curl.c" [ 57s] XSprePUSH; PUSHi((IV)RETVAL); [ 57s] } [ 57s] XSRETURN(1); [ 57s] @@ -1080,7 +1082,7 @@ [ 57s] #line 831 "Curl.xs" [ 57s] croak("internal_setopt no longer supported - use a callback\n"); [ 57s] RETVAL = 0; [ 57s] -#line 1084 "Curl.c" [ 57s] +#line 1086 "Curl.c" [ 57s] XSprePUSH; PUSHi((IV)RETVAL); [ 57s] } [ 57s] XSRETURN(1); [ 57s] @@ -1117,7 +1119,7 @@ [ 57s] SV *sv = perl_get_sv(self->errbufvarname, TRUE | GV_ADDMULTI); [ 57s] sv_setpv(sv, self->errbuf); [ 57s] } [ 57s] -#line 1121 "Curl.c" [ 57s] +#line 1123 "Curl.c" [ 57s] XSprePUSH; PUSHi((IV)RETVAL); [ 57s] } [ 57s] XSRETURN(1); [ 57s] @@ -1175,7 +1177,7 @@ [ 57s] } [ 57s] if (items > 2) [ 57s] sv_setsv(ST(2),RETVAL); [ 57s] -#line 1179 "Curl.c" [ 57s] +#line 1181 "Curl.c" [ 57s] RETVAL = sv_2mortal(RETVAL); [ 57s] ST(0) = RETVAL; [ 57s] } [ 57s] @@ -1205,7 +1207,7 @@ [ 57s] ; [ 57s] #line 894 "Curl.xs" [ 57s] RETVAL = self->errbuf; [ 57s] -#line 1209 "Curl.c" [ 57s] +#line 1211 "Curl.c" [ 57s] sv_setpv(TARG, RETVAL); XSprePUSH; PUSHTARG; [ 57s] } [ 57s] XSRETURN(1); [ 57s] @@ -1235,7 +1237,7 @@ [ 57s] #line 902 "Curl.xs" [ 57s] /* does nothing anymore - cleanup is automatic when a curl handle goes out of scope */ [ 57s] RETVAL = 0; [ 57s] -#line 1239 "Curl.c" [ 57s] +#line 1241 "Curl.c" [ 57s] XSprePUSH; PUSHi((IV)RETVAL); [ 57s] } [ 57s] XSRETURN(1); [ 57s] @@ -1262,7 +1264,7 @@ [ 57s] ; [ 57s] #line 911 "Curl.xs" [ 57s] perl_curl_easy_delete(self); [ 57s] -#line 1266 "Curl.c" [ 57s] +#line 1268 "Curl.c" [ 57s] } [ 57s] XSRETURN_EMPTY; [ 57s] } [ 57s] @@ -1277,7 +1279,7 @@ [ 57s] { [ 57s] #line 916 "Curl.xs" [ 57s] curl_global_cleanup(); [ 57s] -#line 1281 "Curl.c" [ 57s] +#line 1283 "Curl.c" [ 57s] } [ 57s] XSRETURN_EMPTY; [ 57s] } [ 57s] @@ -1313,7 +1315,7 @@ [ 57s] #endif [ 57s] RETVAL = newSVpv(vchar,0); [ 57s] } [ 57s] -#line 1317 "Curl.c" [ 57s] +#line 1319 "Curl.c" [ 57s] RETVAL = sv_2mortal(RETVAL); [ 57s] ST(0) = RETVAL; [ 57s] } [ 57s] @@ -1326,13 +1328,14 @@ [ 57s] { [ 57s] dVAR; dXSARGS; [ 57s] PERL_UNUSED_VAR(cv); /* -W */ [ 57s] + PERL_UNUSED_VAR(items); /* -W */ [ 57s] PERL_UNUSED_VAR(ax); /* -Wall */ [ 57s] SP -= items; [ 57s] { [ 57s] #line 939 "Curl.xs" [ 57s] perl_curl_form *self; [ 57s] char *sclass = "WWW::Curl::Form"; [ 57s] -#line 1336 "Curl.c" [ 57s] +#line 1339 "Curl.c" [ 57s] #line 942 "Curl.xs" [ 57s] if (items>0 && !SvROK(ST(0))) { [ 57s] STRLEN dummy; [ 57s] @@ -1346,7 +1349,7 @@ [ 57s] SvREADONLY_on(SvRV(ST(0))); [ 57s] [ 57s] XSRETURN(1); [ 57s] -#line 1350 "Curl.c" [ 57s] +#line 1353 "Curl.c" [ 57s] PUTBACK; [ 57s] return; [ 57s] } [ 57s] @@ -1382,7 +1385,7 @@ [ 57s] CURLFORM_COPYCONTENTS,value, [ 57s] CURLFORM_END); [ 57s] #endif [ 57s] -#line 1386 "Curl.c" [ 57s] +#line 1389 "Curl.c" [ 57s] } [ 57s] XSRETURN_EMPTY; [ 57s] } [ 57s] @@ -1420,7 +1423,7 @@ [ 57s] CURLFORM_CONTENTTYPE,type, [ 57s] CURLFORM_END); [ 57s] #endif [ 57s] -#line 1424 "Curl.c" [ 57s] +#line 1427 "Curl.c" [ 57s] } [ 57s] XSRETURN_EMPTY; [ 57s] } [ 57s] @@ -1446,7 +1449,7 @@ [ 57s] ; [ 57s] #line 987 "Curl.xs" [ 57s] perl_curl_form_delete(self); [ 57s] -#line 1450 "Curl.c" [ 57s] +#line 1453 "Curl.c" [ 57s] } [ 57s] XSRETURN_EMPTY; [ 57s] [ 57s] obsnw02 finished "build perl-WWW-Curl.spec" at Tue Oct 8 20:23:30 UTC 2019. [ 57s] Retried build at Tue Oct 8 20:58:26 2019 returned same result, skipped Retried build at Tue Oct 8 22:30:35 2019 returned same result, skipped Retried build at Tue Oct 8 22:50:20 2019 returned same result, skipped Retried build at Tue Oct 8 23:55:10 2019 returned same result, skipped Retried build at Fri Oct 11 08:05:16 2019 returned same result, skipped