[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw24 started "build _service:gbs:python3-argparse.spec" at Thu May 21 05:10:36 UTC 2020. [ 0s] [ 0s] Building python3-argparse for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '7fe07d8958251eb52015485473790930' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:python3-argparse.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:python3-argparse.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:python3-argparse.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 2s] [2/40] preinstalling libncurses... [ 2s] [3/40] preinstalling setup... [ 2s] [4/40] preinstalling filesystem... [ 2s] [5/40] preinstalling glibc... [ 2s] [6/40] preinstalling libbz2... [ 2s] [7/40] preinstalling libgcc... [ 2s] [8/40] preinstalling bash... [ 2s] [9/40] preinstalling diffutils... [ 2s] [10/40] preinstalling grep... [ 2s] [11/40] preinstalling libattr... [ 2s] [12/40] preinstalling libblkid... [ 2s] [13/40] preinstalling libcap... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 9s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [27/40] preinstalling coreutils... [ 10s] [28/40] preinstalling libacl... [ 10s] [29/40] preinstalling libelf... [ 10s] [30/40] preinstalling libmount... [ 10s] [31/40] preinstalling smack... [ 10s] [32/40] preinstalling bzip2... [ 10s] [33/40] preinstalling libmagic... [ 10s] [34/40] preinstalling libxml2... [ 10s] [35/40] preinstalling tar... [ 10s] [36/40] preinstalling util-linux... [ 11s] [37/40] preinstalling util-linux-su... [ 11s] [38/40] preinstalling nss... [ 11s] [39/40] preinstalling libsoftokn3... [ 11s] [40/40] preinstalling rpm... [ 11s] [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-armv7l postinstall script [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 12s] [1/102] installing libmagic-data-5.37-17.171 [ 12s] [2/102] installing setup-0.9-10.29 [ 12s] warning: /etc/profile created as /etc/profile.rpmnew [ 12s] [3/102] installing filesystem-3.1-8.1 [ 12s] [4/102] installing glibc-2.30-25.11 [ 12s] [5/102] installing libatomic-9.2.0-7.12 [ 13s] [6/102] installing libbz2-1.0.8-8.2 [ 13s] [7/102] installing libgcc-9.2.0-7.12 [ 14s] [8/102] installing bash-3.2.57-6.7 [ 14s] [9/102] installing cpio-2.11-3.7 [ 14s] [10/102] installing diffutils-3.3-3.7 [ 14s] [11/102] installing findutils-4.3.8-6.349 [ 14s] [12/102] installing gdbm-1.8.3-4.247 [ 14s] [13/102] installing hostname-3.23-7.4 [ 14s] [14/102] installing libattr-2.4.47-5.602 [ 15s] [15/102] installing libblkid-2.34-17.7 [ 15s] [16/102] installing libcap-2.24-4.808 [ 15s] [17/102] installing libexpat-2.2.9-9.37 [ 16s] [18/102] installing libext2fs-1.43.4-7.3 [ 16s] [19/102] installing libffi-3.1-4.41 [ 16s] [20/102] installing libfreebl3-3.34.1-6.129 [ 17s] [21/102] installing libgfortran-9.2.0-7.12 [ 17s] [22/102] installing libgomp-9.2.0-7.12 [ 18s] [23/102] installing libitm-9.2.0-7.12 [ 18s] [24/102] installing libltdl-2.4.2-5.219 [ 18s] [25/102] installing liblua-5.1.5-5.105 [ 19s] [26/102] installing liblzma-5.2.4-6.297 [ 19s] [27/102] installing libopenssl11-1.1.1e-9.41 [ 19s] [28/102] installing libpcre-8.43-7.31 [ 20s] [29/102] installing libpopt-1.16-4.235 [ 20s] [30/102] installing libpython3_7m1_0-3.7.3-15.52 [ 21s] [31/102] installing libsmack-1.3.1-5.367 [ 21s] [32/102] installing libsmartcols-2.34-17.7 [ 21s] [33/102] installing libsqlite-3.31.1-20.26 [ 22s] [34/102] installing libstdc++-9.2.0-7.12 [ 22s] [35/102] installing libuuid-2.34-17.7 [ 23s] [36/102] installing m4-1.4.17-4.4 [ 23s] [37/102] installing net-tools-2.0_20121208git-4.1 [ 23s] [38/102] installing nspr-4.12-4.213 [ 23s] [39/102] installing patch-2.7-3.234 [ 23s] [40/102] installing pkg-config-0.28-6.132 [ 23s] [41/102] installing sed-4.1c-4.7 [ 23s] [42/102] installing update-alternatives-1.18.15-5.4 [ 23s] [43/102] installing which-2.20-6.7 [ 23s] [44/102] installing zlib-1.2.11-5.504 [ 24s] [45/102] installing build-compare-2015.04.28-3.340 [ 24s] [46/102] installing libstdc++-devel-9.2.0-7.12 [ 24s] [47/102] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 26s] [48/102] installing terminfo-base-full-6.1_20191207-12.145 [ 26s] [49/102] installing cpp-9.2.0-7.12 [ 27s] [50/102] installing gcc-c++-9.2.0-7.12 [ 28s] [51/102] installing binutils-2.33.1-19.28 [ 29s] [52/102] installing coreutils-6.9-4.44 [ 29s] [53/102] installing db4-4.8.30.NC-4.143 [ 29s] [54/102] installing gawk-3.1.5-6.4 [ 29s] [55/102] installing grep-2.5.2-6.7 [ 29s] [56/102] installing libacl-2.2.52-5.621 [ 30s] [57/102] installing libcc1-9.2.0-7.12 [ 30s] [58/102] installing libelf-0.178-6.2 [ 31s] [59/102] installing libmount-2.34-17.7 [ 31s] [60/102] installing libubsan-9.2.0-7.12 [ 31s] [61/102] installing make-4.0-5.43 [ 32s] [62/102] installing nss-certs-3.34.1-6.129 [ 32s] [63/102] installing smack-1.3.1-5.367 [ 32s] [64/102] installing bzip2-1.0.8-8.2 [ 32s] [65/102] installing libfdisk-2.34-17.7 [ 32s] [66/102] installing libmagic-5.37-17.171 [ 32s] [67/102] installing libxml2-2.9.10-10.24 [ 33s] [68/102] installing xz-5.2.4-6.297 [ 33s] [69/102] installing python3-base-3.7.3-15.52 [ 34s] [70/102] installing linux-glibc-devel-3.10-10.44 [ 35s] [71/102] installing file-5.37-17.171 [ 35s] [72/102] installing glibc-locale-2.30-25.11 [ 36s] [73/102] installing tar-1.17-4.8 [ 36s] [74/102] installing gzip-1.3.12-7.574 [ 36s] [75/102] installing libncurses6-6.1_20191207-12.145 [ 36s] [76/102] installing pam-1.1.6-8.5 [ 37s] [77/102] installing perl-5.30.0-10.78 [ 39s] [78/102] installing python3-devel-3.7.3-15.52 [ 39s] [79/102] installing tzdata-2019c-12.4 [ 39s] [80/102] installing libdw-0.178-6.2 [ 40s] [81/102] installing gcc-9.2.0-7.12 [ 41s] [82/102] installing build-mkbaselibs-20120927-3.1 [ 41s] [83/102] installing libncurses-6.1_20191207-12.145 [ 41s] [84/102] installing glibc-devel-2.30-25.11 [ 41s] [85/102] installing qemu-accel-x86_64-armv7l-0.4-17.1 [ 48s] [86/102] installing autoconf-2.69-5.319 [ 49s] [87/102] installing less-466-8.12 [ 49s] [88/102] installing libreadline-5.2-5.160 [ 49s] [89/102] installing procps-ng-3.3.15-9.5 [ 49s] [90/102] installing libasm-0.178-6.2 [ 49s] [91/102] installing automake-1.15.1-6.472 [ 50s] [92/102] installing build-20120927-3.1 [ 50s] [93/102] installing elfutils-0.178-6.2 [ 50s] [94/102] installing python3-3.7.3-15.21 [ 50s] [95/102] installing util-linux-2.34-17.7 [ 50s] [96/102] installing python3-setuptools-40.6.3-1.8 [ 51s] [97/102] installing libtool-2.4.2-5.219 [ 51s] [98/102] installing util-linux-su-2.34-17.7 [ 51s] [99/102] installing nss-3.34.1-6.129 [ 51s] [100/102] installing libsoftokn3-3.34.1-6.129 [ 52s] [101/102] installing rpm-4.11.0.1-16.29 [ 52s] [102/102] installing rpm-build-4.11.0.1-16.29 [ 52s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 52s] now finalizing build dir... [ 53s] Running build time source services... [ 53s] Warning: spec file parser line 82: can't expand %(...) [ 53s] build target is armv7l-tizen-linux [ 53s] ----------------------------------------------------------------- [ 53s] I have the following modifications for python3-argparse.spec: [ 53s] 21c21 [ 53s] < Release: 0 [ 53s] --- [ 53s] > Release: 3.1 [ 53s] ----------------------------------------------------------------- [ 53s] ----- building python3-argparse.spec (user abuild) [ 53s] ----------------------------------------------------------------- [ 53s] ----------------------------------------------------------------- [ 54s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/7fe07d8958251eb52015485473790930-python3-argparse' -ba /home/abuild/rpmbuild/SOURCES/python3-argparse.spec [ 54s] Building target platforms: armv7l-tizen-linux [ 54s] Building for target armv7l-tizen-linux [ 54s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.m0pCaN [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + rm -rf argparse-1.4.0 [ 54s] + /bin/tar -xvvf - [ 54s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/argparse-1.4.0.tar.gz [ 54s] drwxrwxr-x root/root 0 2020-04-09 08:03 argparse-1.4.0/ [ 54s] -rw-rw-r-- root/root 741 2020-04-09 08:03 argparse-1.4.0/LICENSE.txt [ 54s] -rw-rw-r-- root/root 218 2020-04-09 08:03 argparse-1.4.0/MANIFEST.in [ 54s] -rw-rw-r-- root/root 1379 2020-04-09 08:03 argparse-1.4.0/NEWS.txt [ 54s] -rw-rw-r-- root/root 3227 2020-04-09 08:03 argparse-1.4.0/PKG-INFO [ 54s] -rw-rw-r-- root/root 1538 2020-04-09 08:03 argparse-1.4.0/README.txt [ 54s] drwxrwxr-x root/root 0 2020-04-09 08:03 argparse-1.4.0/argparse.egg-info/ [ 54s] -rw-rw-r-- root/root 3227 2020-04-09 08:03 argparse-1.4.0/argparse.egg-info/PKG-INFO [ 54s] -rw-rw-r-- root/root 367 2020-04-09 08:03 argparse-1.4.0/argparse.egg-info/SOURCES.txt [ 54s] -rw-rw-r-- root/root 1 2020-04-09 08:03 argparse-1.4.0/argparse.egg-info/dependency_links.txt [ 54s] -rw-rw-r-- root/root 9 2020-04-09 08:03 argparse-1.4.0/argparse.egg-info/top_level.txt [ 54s] -rw-rw-r-- root/root 89214 2020-04-09 08:03 argparse-1.4.0/argparse.py [ 54s] drwxrwxr-x root/root 0 2020-04-09 08:03 argparse-1.4.0/doc/ [ 54s] -rw-rw-r-- root/root 5441 2020-04-09 08:03 argparse-1.4.0/doc/Makefile [ 54s] -rw-rw-r-- root/root 5005 2020-04-09 08:03 argparse-1.4.0/doc/make.bat [ 54s] drwxrwxr-x root/root 0 2020-04-09 08:03 argparse-1.4.0/doc/source/ [ 54s] -rw-rw-r-- root/root 14231 2020-04-09 08:03 argparse-1.4.0/doc/source/Python-License.txt [ 54s] -rw-rw-r-- root/root 65760 2020-04-09 08:03 argparse-1.4.0/doc/source/argparse.rst [ 54s] -rw-rw-r-- root/root 7470 2020-04-09 08:03 argparse-1.4.0/doc/source/conf.py [ 54s] -rw-rw-r-- root/root 433 2020-04-09 08:03 argparse-1.4.0/doc/source/index.rst [ 54s] -rw-rw-r-- root/root 218 2020-04-09 08:03 argparse-1.4.0/doc/source/license.rst [ 54s] -rw-rw-r-- root/root 326 2020-04-09 08:03 argparse-1.4.0/setup.cfg [ 54s] -rw-rw-r-- root/root 1372 2020-04-09 08:03 argparse-1.4.0/setup.py [ 54s] drwxrwxr-x root/root 0 2020-04-09 08:03 argparse-1.4.0/test/ [ 54s] -rw-rw-r-- root/root 146808 2020-04-09 08:03 argparse-1.4.0/test/test_argparse.py [ 54s] + STATUS=0 [ 54s] + '[' 0 -ne 0 ']' [ 54s] + cd argparse-1.4.0 [ 54s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 54s] + mkdir html [ 54s] + pushd doc [ 54s] ~/rpmbuild/BUILD/argparse-1.4.0/doc ~/rpmbuild/BUILD/argparse-1.4.0 [ 54s] + mv Makefile make.bat source ../html/ [ 54s] + mv ../html . [ 54s] + popd [ 54s] ~/rpmbuild/BUILD/argparse-1.4.0 [ 54s] + sed -i 's/\r//' NEWS.txt [ 54s] + exit 0 [ 54s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ltS3QO [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd argparse-1.4.0 [ 54s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 54s] + export CFLAGS [ 54s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 54s] + export CXXFLAGS [ 54s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 54s] + export FFLAGS [ 54s] + LDFLAGS= [ 54s] + export LDFLAGS [ 54s] + cp /home/abuild/rpmbuild/SOURCES/python3-argparse.manifest . [ 54s] + /usr/bin/python3 setup.py build [ 58s] running build [ 58s] running build_py [ 58s] creating build [ 58s] creating build/lib [ 58s] copying argparse.py -> build/lib [ 59s] + exit 0 [ 59s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ei3EsM [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd argparse-1.4.0 [ 59s] + LANG=C [ 59s] + export LANG [ 59s] + unset DISPLAY [ 59s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm [ 59s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm [ 62s] running install [ 62s] running build [ 62s] running build_py [ 63s] running install_lib [ 63s] creating /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr [ 63s] creating /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/lib [ 63s] creating /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/lib/python3.7 [ 63s] creating /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/lib/python3.7/site-packages [ 63s] copying build/lib/argparse.py -> /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/lib/python3.7/site-packages [ 63s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/lib/python3.7/site-packages/argparse.py to argparse.cpython-37.pyc [ 63s] running install_egg_info [ 63s] running egg_info [ 63s] writing argparse.egg-info/PKG-INFO [ 63s] writing dependency_links to argparse.egg-info/dependency_links.txt [ 63s] writing top-level names to argparse.egg-info/top_level.txt [ 63s] reading manifest file 'argparse.egg-info/SOURCES.txt' [ 63s] reading manifest template 'MANIFEST.in' [ 63s] warning: no previously-included files matching '*.pyc' found anywhere in distribution [ 64s] warning: no previously-included files matching '*.pyo' found anywhere in distribution [ 64s] warning: no previously-included files matching '*.orig' found anywhere in distribution [ 64s] warning: no previously-included files matching '*.rej' found anywhere in distribution [ 64s] no previously-included directories found matching 'doc/_build' [ 64s] no previously-included directories found matching 'env24' [ 64s] no previously-included directories found matching 'env25' [ 64s] no previously-included directories found matching 'env26' [ 64s] no previously-included directories found matching 'env27' [ 64s] writing manifest file 'argparse.egg-info/SOURCES.txt' [ 64s] Copying argparse.egg-info to /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/lib/python3.7/site-packages/argparse-1.4.0-py3.7.egg-info [ 64s] running install_scripts [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/info [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/doc/packages [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/doc/python3-argparse [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/doc/python3-argparse-1.4.0 [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/gtk-doc [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/doc [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/man [ 64s] + find /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 64s] + xargs rm -f -- [ 64s] + xargs rm -f -- [ 64s] + find /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 64s] + find /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 64s] + xargs rm -f -- [ 64s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/argparse-1.4.0 [ 64s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/argparse-1.4.0/python3-argparse-debuginfo.manifest [ 64s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/argparse-1.4.0/python3-argparse-debugsource.manifest [ 64s] + /usr/lib/rpm/check-buildroot [ 64s] + /usr/lib/rpm//brp-compress [ 64s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 64s] + /usr/lib/rpm/brp-python-hardlink [ 64s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm [ 64s] Processing files: python3-argparse-1.4.0-3.1.noarch [ 64s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 64s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 64s] [ 64s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.tnvSqO [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd argparse-1.4.0 [ 64s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/licenses/python3-argparse [ 64s] + export LICENSEDIR [ 64s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/licenses/python3-argparse [ 64s] + cp -pr doc/html/source/Python-License.txt /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm/usr/share/licenses/python3-argparse [ 64s] + exit 0 [ 64s] Provides: python3-argparse = 1.4.0-3.1 python3-argparse-backport = 1.4.0 [ 64s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 64s] Requires: python(abi) = 3.7 [ 64s] Obsoletes: python3-argparse-backport < 1.4.0 [ 64s] Processing files: python3-argparse-debugsource-1.4.0-3.1.noarch [ 64s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 64s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 64s] [ 64s] Provides: python3-argparse-debugsource = 1.4.0-3.1 [ 64s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 64s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm [ 65s] warning: Could not canonicalize hostname: obspw24 [ 65s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-argparse-1.4.0-3.1.src.rpm [ 65s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-argparse-1.4.0-3.1.noarch.rpm [ 65s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-argparse-debugsource-1.4.0-3.1.noarch.rpm [ 65s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.cfcwVP [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd argparse-1.4.0 [ 65s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-argparse-1.4.0-3.1.arm [ 65s] + exit 0 [ 65s] ... checking for files with abuild user/group [ 65s] ... creating baselibs [ 66s] ... comparing built packages with the former built [ 66s] /usr/lib/build/pkg-diff.sh [ 66s] compare /.build.oldpackages/python3-argparse-1.4.0-7.1.src.rpm /home/abuild/rpmbuild/SRPMS/python3-argparse-1.4.0-3.1.src.rpm [ 66s] This is not a prerelease project. Compare the project name. [ 66s] comparing rpmtags [ 66s] comparing RELEASE [ 66s] comparing PROVIDES [ 66s] comparing scripts [ 67s] comparing filelist [ 67s] comparing file checksum [ 67s] RPM meta information is identical [ 67s] compare /.build.oldpackages/python3-argparse-1.4.0-7.1.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/python3-argparse-1.4.0-3.1.noarch.rpm [ 67s] Comparing python3-argparse-1.4.0-7.1.noarch.rpm to python3-argparse-1.4.0-3.1.noarch.rpm [ 67s] This is not a prerelease project. Compare the project name. [ 67s] comparing rpmtags [ 67s] --- /tmp/tmp.vlHr108317/tmp.Fzxp108335 2020-05-21 05:11:43.548493076 +0000 [ 67s] +++ /tmp/tmp.vlHr108317/tmp.rxRN108337 2020-05-21 05:11:43.560492740 +0000 [ 67s] @@ -24,4 +24,4 @@ [ 67s] cpio xz 5T [ 67s] [ 67s] (none) (none) (none) [ 67s] -obs://build.tizen.org/Tizen:Unified/standard/6813b47a8ac4f82ccf7a62aa5d0d3681-python3-argparse Tizen:Unified [ 67s] +obs://build.tizen.org/Tizen:Unified/standard/7fe07d8958251eb52015485473790930-python3-argparse Tizen:Unified [ 67s] RPM meta information is different [ 67s] compare /.build.oldpackages/python3-argparse-debugsource-1.4.0-7.1.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/python3-argparse-debugsource-1.4.0-3.1.noarch.rpm [ 67s] Comparing python3-argparse-debugsource-1.4.0-7.1.noarch.rpm to python3-argparse-debugsource-1.4.0-3.1.noarch.rpm [ 67s] This is not a prerelease project. Compare the project name. [ 67s] comparing rpmtags [ 67s] --- /tmp/tmp.OcdF108355/tmp.RNvA108373 2020-05-21 05:11:43.928482441 +0000 [ 67s] +++ /tmp/tmp.OcdF108355/tmp.Svtw108375 2020-05-21 05:11:43.936482217 +0000 [ 67s] @@ -10,4 +10,4 @@ [ 67s] cpio xz 5T [ 67s] [ 67s] (none) (none) (none) [ 67s] -obs://build.tizen.org/Tizen:Unified/standard/6813b47a8ac4f82ccf7a62aa5d0d3681-python3-argparse Tizen:Unified [ 67s] +obs://build.tizen.org/Tizen:Unified/standard/7fe07d8958251eb52015485473790930-python3-argparse Tizen:Unified [ 67s] RPM meta information is different [ 68s] [ 68s] obspw24 finished "build python3-argparse.spec" at Thu May 21 05:11:44 UTC 2020. [ 68s] Retried build at Thu May 28 01:15:26 2020 returned same result, skipped Retried build at Tue Jun 9 05:17:23 2020 returned same result, skipped