[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw17 started "build _service:gbs:stability-monitor-kmod-rpi3.spec" at Tue Jun 9 05:30:24 UTC 2020. [ 0s] [ 0s] Building stability-monitor-kmod-rpi3 for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 'e709047c203afdab15a8d6ca28bc9116' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libbz2... [ 1s] [7/40] preinstalling libgcc... [ 1s] [8/40] preinstalling bash... [ 1s] [9/40] preinstalling diffutils... [ 1s] [10/40] preinstalling grep... [ 1s] [11/40] preinstalling libattr... [ 1s] [12/40] preinstalling libblkid... [ 1s] [13/40] preinstalling libcap... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libelf... [ 7s] [30/40] preinstalling libmount... [ 8s] [31/40] preinstalling smack... [ 8s] [32/40] preinstalling bzip2... [ 8s] [33/40] preinstalling libmagic... [ 8s] [34/40] preinstalling libxml2... [ 8s] [35/40] preinstalling tar... [ 8s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/100] installing libmagic-data-5.37-18.15 [ 9s] [2/100] installing setup-0.9-10.30 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [3/100] installing filesystem-3.1-8.1 [ 9s] [4/100] installing glibc-2.30-26.9 [ 9s] [5/100] installing libatomic-9.2.0-8.8 [ 10s] [6/100] installing libbz2-1.0.8-8.21 [ 10s] [7/100] installing libgcc-9.2.0-8.8 [ 10s] [8/100] installing bash-3.2.57-6.7 [ 10s] [9/100] installing cpio-2.11-3.7 [ 11s] [10/100] installing diffutils-3.3-3.7 [ 11s] [11/100] installing findutils-4.3.8-6.367 [ 11s] [12/100] installing gdbm-1.8.3-4.266 [ 11s] [13/100] installing hostname-3.23-7.4 [ 11s] [14/100] installing libattr-2.4.47-5.620 [ 11s] [15/100] installing libblkid-2.34-17.8 [ 12s] [16/100] installing libcap-2.24-4.826 [ 12s] [17/100] installing libext2fs-1.43.4-7.3 [ 12s] [18/100] installing libfreebl3-3.34.1-6.143 [ 13s] [19/100] installing libgfortran-9.2.0-8.8 [ 13s] [20/100] installing libgomp-9.2.0-8.8 [ 13s] [21/100] installing libitm-9.2.0-8.8 [ 14s] [22/100] installing libltdl-2.4.2-5.238 [ 14s] [23/100] installing liblua-5.1.5-5.109 [ 14s] [24/100] installing liblzma-5.2.4-6.307 [ 14s] [25/100] installing libopenssl11-1.1.1g-10.9 [ 15s] [26/100] installing libpcre-8.43-7.31 [ 15s] [27/100] installing libpopt-1.16-4.253 [ 16s] [28/100] installing libsmack-1.3.1-5.384 [ 16s] [29/100] installing libsmartcols-2.34-17.8 [ 16s] [30/100] installing libsqlite-3.31.1-20.30 [ 17s] [31/100] installing libstdc++-9.2.0-8.8 [ 17s] [32/100] installing libunwind-1.2-7.45 [ 17s] [33/100] installing libuuid-2.34-17.8 [ 18s] [34/100] installing m4-1.4.17-4.4 [ 18s] [35/100] installing net-tools-2.0_20121208git-4.1 [ 18s] [36/100] installing nspr-4.12-4.231 [ 18s] [37/100] installing patch-2.7-3.251 [ 18s] [38/100] installing pkg-config-0.28-6.150 [ 18s] [39/100] installing sed-4.1c-4.7 [ 18s] [40/100] installing update-alternatives-1.18.15-5.4 [ 18s] [41/100] installing which-2.20-6.7 [ 18s] [42/100] installing zlib-1.2.11-5.523 [ 18s] [43/100] installing build-compare-2015.04.28-3.343 [ 18s] [44/100] installing libstdc++-devel-9.2.0-8.8 [ 19s] [45/100] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 20s] [46/100] installing terminfo-base-full-6.1_20191207-12.160 [ 20s] [47/100] installing cpp-9.2.0-8.8 [ 21s] [48/100] installing gcc-c++-9.2.0-8.8 [ 22s] [49/100] installing binutils-2.33.1-19.37 [ 22s] [50/100] installing coreutils-6.9-4.45 [ 22s] [51/100] installing db4-4.8.30.NC-4.162 [ 23s] [52/100] installing gawk-3.1.5-6.4 [ 23s] [53/100] installing grep-2.5.2-6.7 [ 23s] [54/100] installing libacl-2.2.52-5.639 [ 23s] [55/100] installing libcc1-9.2.0-8.8 [ 23s] [56/100] installing libelf-0.178-6.4 [ 24s] [57/100] installing libmount-2.34-17.8 [ 24s] [58/100] installing libubsan-9.2.0-8.8 [ 24s] [59/100] installing make-4.0-5.45 [ 25s] [60/100] installing nss-certs-3.34.1-6.143 [ 25s] [61/100] installing smack-1.3.1-5.384 [ 25s] [62/100] installing bzip2-1.0.8-8.21 [ 25s] [63/100] installing kmod-27-6.1 [ 25s] [64/100] installing libfdisk-2.34-17.8 [ 25s] [65/100] installing libmagic-5.37-18.15 [ 25s] [66/100] installing libxml2-2.9.10-11.3 [ 26s] [67/100] installing xz-5.2.4-6.307 [ 26s] [68/100] installing kmod-compat-27-6.1 [ 26s] [69/100] installing linux-glibc-devel-3.10-10.63 [ 26s] [70/100] installing file-5.37-18.15 [ 26s] [71/100] installing glibc-locale-2.30-26.9 [ 27s] [72/100] installing tar-1.17-4.8 [ 27s] [73/100] installing gzip-1.3.12-7.592 [ 27s] [74/100] installing libncurses6-6.1_20191207-12.160 [ 27s] [75/100] installing pam-1.1.6-8.5 [ 28s] [76/100] installing perl-5.30.0-10.86 [ 30s] [77/100] installing tzdata-2019c-12.4 [ 30s] [78/100] installing libdw-0.178-6.4 [ 30s] [79/100] installing gcc-9.2.0-8.8 [ 31s] [80/100] installing build-mkbaselibs-20120927-3.1 [ 31s] [81/100] installing libncurses-6.1_20191207-12.160 [ 31s] [82/100] installing glibc-devel-2.30-26.9 [ 31s] [83/100] installing qemu-accel-x86_64-armv7l-0.4-17.2 [ 37s] [84/100] installing autoconf-2.69-5.327 [ 37s] [85/100] installing less-466-8.12 [ 37s] [86/100] installing libreadline-5.2-5.162 [ 38s] [87/100] installing procps-ng-3.3.15-9.5 [ 38s] [88/100] installing libasm-0.178-6.4 [ 38s] [89/100] installing arm-rpi4-linux-kernel-devel-4.19.113-19.2 [ 47s] [90/100] installing arm-rpi3-linux-kernel-devel-4.19.49-81.15 [ 56s] [91/100] installing automake-1.15.1-6.483 [ 56s] [92/100] installing build-20120927-3.1 [ 56s] [93/100] installing elfutils-0.178-6.4 [ 56s] [94/100] installing util-linux-2.34-17.8 [ 56s] [95/100] installing libtool-2.4.2-5.238 [ 57s] [96/100] installing util-linux-su-2.34-17.8 [ 57s] [97/100] installing nss-3.34.1-6.143 [ 57s] [98/100] installing libsoftokn3-3.34.1-6.143 [ 57s] [99/100] installing rpm-4.11.0.1-17.8 [ 58s] [100/100] installing rpm-build-4.11.0.1-17.8 [ 58s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 58s] now finalizing build dir... [ 58s] Running build time source services... [ 59s] build target is armv7l-tizen-linux [ 59s] ----------------------------------------------------------------- [ 59s] I have the following modifications for stability-monitor-kmod-rpi3.spec: [ 59s] 6c6 [ 59s] < Release: 0 [ 59s] --- [ 59s] > Release: 6.9 [ 59s] ----------------------------------------------------------------- [ 59s] ----- building stability-monitor-kmod-rpi3.spec (user abuild) [ 59s] ----------------------------------------------------------------- [ 59s] ----------------------------------------------------------------- [ 59s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/e709047c203afdab15a8d6ca28bc9116-stability-monitor-kmod-rpi3' -ba /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.spec [ 59s] Building target platforms: armv7l-tizen-linux [ 59s] Building for target armv7l-tizen-linux [ 59s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uN7iqc [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + rm -rf stability-monitor-kmod-rpi3-6.2.1 [ 59s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3-6.2.1.tar.xz [ 59s] + /bin/tar -xf - [ 59s] + STATUS=0 [ 59s] + '[' 0 -ne 0 ']' [ 59s] + cd stability-monitor-kmod-rpi3-6.2.1 [ 59s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 59s] + cp /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.manifest ./stability-monitor-kmod-rpi3.manifest [ 59s] + exit 0 [ 59s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.pjaiCc [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd stability-monitor-kmod-rpi3-6.2.1 [ 59s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 59s] + LANG=C [ 59s] + export LANG [ 59s] + unset DISPLAY [ 59s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 59s] + export CFLAGS [ 59s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 59s] + export CXXFLAGS [ 59s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 59s] + export FFLAGS [ 59s] + LDFLAGS= [ 59s] + export LDFLAGS [ 59s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 [ 59s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 59s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel clean [ 59s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 60s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 60s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 60s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3/ [ 60s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 60s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3/ M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel modules [ 60s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 61s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.o [ 61s] Building modules, stage 2. [ 61s] MODPOST 1 modules [ 61s] CC /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.mod.o [ 61s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.ko [ 61s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 61s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 61s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 INSTALL_MOD_STRIP=1 [ 61s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 61s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/../ modules_install [ 61s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 62s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.ko [ 62s] DEPMOD 4.19.49-arm-rpi3-v7 [ 62s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/..//lib/modules/4.19.49-arm-rpi3-v7: No such file or directory [ 62s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/..//lib/modules/4.19.49-arm-rpi3-v7: No such file or directory [ 62s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 62s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 62s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 62s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 62s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel clean [ 62s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 63s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/.tmp_versions [ 63s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/Module.symvers [ 63s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 63s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 63s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 63s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 63s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel modules [ 63s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 64s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.o [ 64s] Building modules, stage 2. [ 64s] MODPOST 1 modules [ 65s] CC /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.mod.o [ 65s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.ko [ 65s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 65s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 65s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 INSTALL_MOD_STRIP=1 [ 65s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 65s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/../ modules_install [ 65s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 66s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/proc-tsm.ko [ 66s] DEPMOD 4.19.113-arm-rpi4-v7l [ 66s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/..//lib/modules/4.19.113-arm-rpi4-v7l: No such file or directory [ 66s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/..//lib/modules/4.19.113-arm-rpi4-v7l: No such file or directory [ 66s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 66s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 66s] + exit 0 [ 66s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.7PqhIe [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd stability-monitor-kmod-rpi3-6.2.1 [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm [ 66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm [ 66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm//usr/lib/stability-monitor [ 66s] + pushd lib/modules [ 66s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/lib/modules ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1 [ 66s] + find -name '*.ko' -exec cp -a --parents '{}' /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm//usr/lib/stability-monitor/ ';' [ 66s] + popd [ 66s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1 [ 66s] + install -D config/stability-monitor.conf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm/etc/modprobe.d/stability-monitor.conf [ 66s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1 [ 66s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/stability-monitor-kmod-rpi3-debuginfo.manifest [ 66s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/stability-monitor-kmod-rpi3-debugsource.manifest [ 66s] + /usr/lib/rpm/check-buildroot [ 66s] + /usr/lib/rpm//brp-compress [ 66s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 66s] + /usr/lib/rpm/brp-python-hardlink [ 66s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm [ 66s] Processing files: stability-monitor-kmod-rpi3-6.2.1-6.9.armv7l [ 66s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 66s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 66s] [ 66s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.o8Dbtb [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd stability-monitor-kmod-rpi3-6.2.1 [ 66s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 66s] + export LICENSEDIR [ 66s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 66s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 66s] + exit 0 [ 66s] Provides: stability-monitor-kernel-module stability-monitor-kmod-rpi3 = 6.2.1-6.9 stability-monitor-kmod-rpi3(armv7l-32) = 6.2.1-6.9 [ 66s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 66s] Processing files: stability-monitor-kmod-rpi3-debugsource-6.2.1-6.9.armv7l [ 66s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 66s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 66s] [ 66s] Provides: stability-monitor-kmod-rpi3-debugsource = 6.2.1-6.9 stability-monitor-kmod-rpi3-debugsource(armv7l-32) = 6.2.1-6.9 [ 66s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 66s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm [ 66s] warning: Could not canonicalize hostname: obspw17 [ 66s] Wrote: /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.2.1-6.9.src.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-6.2.1-6.9.armv7l.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-debugsource-6.2.1-6.9.armv7l.rpm [ 66s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.spygfe [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd stability-monitor-kmod-rpi3-6.2.1 [ 66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm [ 66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.2.1-6.9.arm [ 66s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 [ 66s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 66s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel clean [ 66s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 67s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/.tmp_versions [ 67s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel/Module.symvers [ 67s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 67s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 67s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 67s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 67s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel clean [ 67s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 68s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 68s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.2.1/kernel' [ 68s] + rm -rf '/home/abuild/rpmbuild/BUILD/%{Name}-6.2.1/lib' [ 68s] + exit 0 [ 68s] ... checking for files with abuild user/group [ 68s] ... creating baselibs [ 69s] ... comparing built packages with the former built [ 69s] /usr/lib/build/pkg-diff.sh [ 69s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.2.1-6.8.src.rpm /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.2.1-6.9.src.rpm [ 69s] This is not a prerelease project. Compare the project name. [ 69s] comparing rpmtags [ 69s] comparing RELEASE [ 69s] comparing PROVIDES [ 69s] comparing scripts [ 69s] comparing filelist [ 69s] comparing file checksum [ 69s] RPM meta information is identical [ 69s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.2.1-6.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-6.2.1-6.9.armv7l.rpm [ 69s] Comparing stability-monitor-kmod-rpi3-6.2.1-6.8.armv7l.rpm to stability-monitor-kmod-rpi3-6.2.1-6.9.armv7l.rpm [ 69s] This is not a prerelease project. Compare the project name. [ 69s] comparing rpmtags [ 69s] comparing RELEASE [ 69s] comparing PROVIDES [ 69s] comparing scripts [ 69s] comparing filelist [ 69s] comparing file checksum [ 69s] creating rename script [ 69s] RPM file checksum differs. [ 69s] Extracting packages [ 70s] /usr/lib/stability-monitor/4.19.113-arm-rpi4-v7l/extra/proc-tsm.ko differs in ELF section .comment [ 70s] --- /tmp/tmp.Fovbw18426/tmp.uNxdd18525 2020-06-09 05:31:34.136903811 +0000 [ 70s] +++ /tmp/tmp.Fovbw18426/tmp.utVFj18527 2020-06-09 05:31:34.140903793 +0000 [ 70s] @@ -4,7 +4,7 @@ [ 70s] Contents of section .comment: [ 70s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 70s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 70s] - 0020 372e3429 20392e32 2e300000 4743433a 7.4) 9.2.0..GCC: [ 70s] + 0020 382e3129 20392e32 2e300000 4743433a 8.1) 9.2.0..GCC: [ 70s] 0030 20285469 7a656e20 47434320 392e322e (Tizen GCC 9.2. [ 70s] - 0040 30203230 31393038 31322037 2e342920 0 20190812 7.4) [ 70s] + 0040 30203230 31393038 31322038 2e312920 0 20190812 8.1) [ 70s] 0050 392e322e 3000 9.2.0. [ 70s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-debugsource-6.2.1-6.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-debugsource-6.2.1-6.9.armv7l.rpm [ 70s] Comparing stability-monitor-kmod-rpi3-debugsource-6.2.1-6.8.armv7l.rpm to stability-monitor-kmod-rpi3-debugsource-6.2.1-6.9.armv7l.rpm [ 70s] This is not a prerelease project. Compare the project name. [ 70s] comparing rpmtags [ 70s] comparing RELEASE [ 70s] comparing PROVIDES [ 70s] comparing scripts [ 70s] comparing filelist [ 70s] comparing file checksum [ 70s] creating rename script [ 70s] RPM meta information is identical [ 70s] [ 70s] obspw17 finished "build stability-monitor-kmod-rpi3.spec" at Tue Jun 9 05:31:34 UTC 2020. [ 70s]