[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw07 started "build _service:gbs:stability-monitor-kmod-rpi3.spec" at Sun Aug 9 12:06:42 UTC 2020. [ 0s] [ 0s] Building stability-monitor-kmod-rpi3 for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 '3787ba0bf05ea7b4b3fc3596d7c468fc' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling libncurses... [ 0s] [3/40] preinstalling setup... [ 0s] [4/40] preinstalling filesystem... [ 0s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libblkid... [ 1s] [11/40] preinstalling libbz2... [ 1s] [12/40] preinstalling libcap... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling libgcc... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libelf... [ 7s] [30/40] preinstalling libmount... [ 7s] [31/40] preinstalling smack... [ 7s] [32/40] preinstalling bzip2... [ 7s] [33/40] preinstalling libmagic... [ 7s] [34/40] preinstalling libxml2... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/102] installing libmagic-data-5.37-3.45 [ 9s] [2/102] installing setup-0.9-3.5 [ 9s] [3/102] installing filesystem-3.1-3.1 [ 9s] [4/102] installing glibc-2.30-4.2 [ 9s] [5/102] installing bash-3.2.57-4.1 [ 9s] [6/102] installing cpio-2.11-3.1 [ 9s] [7/102] installing diffutils-3.3-3.1 [ 9s] [8/102] installing findutils-4.3.8-3.49 [ 9s] [9/102] installing gdbm-1.8.3-3.58 [ 10s] [10/102] installing hostname-3.23-3.1 [ 10s] [11/102] installing libatomic-9.2.0-4.2 [ 10s] [12/102] installing libattr-2.4.47-3.56 [ 10s] [13/102] installing libblkid-2.34-4.3 [ 11s] [14/102] installing libbz2-1.0.8-4.4 [ 11s] [15/102] installing libcap-2.24-3.56 [ 11s] [16/102] installing libexpat-2.2.9-3.1 [ 12s] [17/102] installing libext2fs-1.43.4-3.1 [ 12s] [18/102] installing libfreebl3-3.34.1-3.34 [ 12s] [19/102] installing libgcc-9.2.0-4.2 [ 13s] [20/102] installing libgomp-9.2.0-4.2 [ 13s] [21/102] installing libitm-9.2.0-4.2 [ 13s] [22/102] installing libltdl-2.4.2-3.28 [ 14s] [23/102] installing liblua-5.1.5-3.62 [ 14s] [24/102] installing liblzma-5.2.4-3.45 [ 14s] [25/102] installing libopenssl11-1.1.1g-3.37 [ 15s] [26/102] installing libpcre-8.43-3.8 [ 15s] [27/102] installing libpopt-1.16-3.56 [ 15s] [28/102] installing libsmack-1.3.1-3.54 [ 16s] [29/102] installing libsmartcols-2.34-4.3 [ 16s] [30/102] installing libsqlite-3.31.1-3.44 [ 16s] [31/102] installing libuuid-2.34-4.3 [ 17s] [32/102] installing m4-1.4.17-2.1 [ 17s] [33/102] installing net-tools-2.0_20121208git-3.1 [ 17s] [34/102] installing nspr-4.12-3.54 [ 17s] [35/102] installing patch-2.7-3.49 [ 17s] [36/102] installing pkg-config-0.28-3.47 [ 17s] [37/102] installing sed-4.1c-3.1 [ 17s] [38/102] installing update-alternatives-1.18.15-2.1 [ 17s] [39/102] installing which-2.20-3.1 [ 17s] [40/102] installing zlib-1.2.11-3.49 [ 17s] [41/102] installing build-compare-2015.04.28-3.15 [ 18s] [42/102] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 19s] [43/102] installing terminfo-base-full-6.1_20191207-3.38 [ 19s] [44/102] installing coreutils-6.9-4.5 [ 19s] [45/102] installing cpp-9.2.0-4.2 [ 20s] [46/102] installing gawk-3.1.5-3.1 [ 20s] [47/102] installing gcc-c++-9.2.0-4.2 [ 21s] [48/102] installing grep-2.5.2-3.1 [ 21s] [49/102] installing libacl-2.2.52-3.53 [ 21s] [50/102] installing libelf-0.178-3.7 [ 22s] [51/102] installing libgfortran-9.2.0-4.2 [ 22s] [52/102] installing libmount-2.34-4.3 [ 22s] [53/102] installing libstdc++-9.2.0-4.2 [ 23s] [54/102] installing libunwind-1.2-7.51 [ 23s] [55/102] installing make-4.0-2.7 [ 23s] [56/102] installing nss-certs-3.34.1-3.34 [ 23s] [57/102] installing smack-1.3.1-3.54 [ 23s] [58/102] installing bzip2-1.0.8-4.4 [ 23s] [59/102] installing libfdisk-2.34-4.3 [ 24s] [60/102] installing libmagic-5.37-3.45 [ 24s] [61/102] installing libxml2-2.9.10-3.44 [ 24s] [62/102] installing perl-5.30.0-2.23 [ 26s] [63/102] installing xz-5.2.4-3.45 [ 26s] [64/102] installing kmod-27-6.1 [ 26s] [65/102] installing build-mkbaselibs-20120927-3.1 [ 26s] [66/102] installing libstdc++-devel-9.2.0-4.2 [ 27s] [67/102] installing file-5.37-3.45 [ 27s] [68/102] installing kmod-compat-27-6.1 [ 27s] [69/102] installing linux-glibc-devel-3.10-3.56 [ 27s] [70/102] installing tar-1.17-2.1 [ 27s] [71/102] installing autoconf-2.69-3.28 [ 28s] [72/102] installing binutils-2.33.1-4.4 [ 28s] [73/102] installing glibc-locale-2.30-4.2 [ 29s] [74/102] installing gzip-1.3.12-3.55 [ 29s] [75/102] installing libcc1-9.2.0-4.2 [ 29s] [76/102] installing libubsan-9.2.0-4.2 [ 29s] [77/102] installing pam-1.1.6-3.1 [ 30s] [78/102] installing libncurses6-6.1_20191207-3.38 [ 30s] [79/102] installing tzdata-2019c-2.1 [ 31s] [80/102] installing libdw-0.178-3.7 [ 31s] [81/102] installing arm64-rpi4-linux-kernel-devel-5.4.50-29.2 [ 41s] [82/102] installing libarchive-3.4.0-8.5 [ 41s] [83/102] installing libncurses-6.1_20191207-3.38 [ 41s] [84/102] installing glibc-devel-2.30-4.2 [ 41s] [85/102] installing less-466-3.1 [ 41s] [86/102] installing libreadline-5.2-2.54 [ 42s] [87/102] installing procps-ng-3.3.15-2.1 [ 42s] [88/102] installing automake-1.15.1-3.33 [ 42s] [89/102] installing libasm-0.178-3.7 [ 42s] [90/102] installing build-20120927-3.1 [ 42s] [91/102] installing cmake-3.9.4-7.5 [ 43s] [92/102] installing gcc-9.2.0-4.2 [ 44s] [93/102] installing arm64-rpi3-linux-kernel-devel-4.19.49-85.8 [ 53s] [94/102] installing qemu-accel-x86_64-aarch64-0.4-17.8 [ 60s] [95/102] installing libtool-2.4.2-3.28 [ 60s] [96/102] installing elfutils-0.178-3.7 [ 60s] [97/102] installing util-linux-2.34-4.3 [ 60s] [98/102] installing util-linux-su-2.34-4.3 [ 60s] [99/102] installing nss-3.34.1-3.34 [ 61s] [100/102] installing libsoftokn3-3.34.1-3.34 [ 61s] [101/102] installing rpm-4.11.0.1-2.25 [ 61s] [102/102] installing rpm-build-4.11.0.1-2.25 [ 62s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 62s] now finalizing build dir... [ 62s] Running build time source services... [ 62s] build target is aarch64-tizen-linux [ 62s] ----------------------------------------------------------------- [ 62s] I have the following modifications for stability-monitor-kmod-rpi3.spec: [ 62s] 12c12 [ 62s] < Release: 0 [ 62s] --- [ 62s] > Release: 8.5 [ 62s] ----------------------------------------------------------------- [ 62s] ----- building stability-monitor-kmod-rpi3.spec (user abuild) [ 62s] ----------------------------------------------------------------- [ 62s] ----------------------------------------------------------------- [ 62s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/3787ba0bf05ea7b4b3fc3596d7c468fc-stability-monitor-kmod-rpi3' -ba /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.spec [ 62s] Building target platforms: aarch64-tizen-linux [ 62s] Building for target aarch64-tizen-linux [ 62s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Cbn0Vf [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + rm -rf stability-monitor-kmod-rpi3-6.3.1 [ 62s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3-6.3.1.tar.xz [ 62s] + /bin/tar -xf - [ 62s] + STATUS=0 [ 62s] + '[' 0 -ne 0 ']' [ 62s] + cd stability-monitor-kmod-rpi3-6.3.1 [ 62s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 62s] + cp /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.manifest ./stability-monitor-kmod-rpi3.manifest [ 62s] + exit 0 [ 62s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QuU0qg [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd stability-monitor-kmod-rpi3-6.3.1 [ 62s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 62s] + ref=/usr/lib/rpm [ 62s] + for s in guess sub [ 62s] ++ find -maxdepth 8 -name config.guess [ 62s] + for s in guess sub [ 62s] ++ find -maxdepth 8 -name config.sub [ 62s] + LANG=C [ 62s] + export LANG [ 62s] + unset DISPLAY [ 62s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 62s] + export CFLAGS [ 62s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 62s] + export CXXFLAGS [ 62s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 62s] + export FFLAGS [ 62s] + LDFLAGS= [ 62s] + export LDFLAGS [ 62s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 62s] + export CFLAGS [ 62s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 62s] + export CXXFLAGS [ 62s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 62s] + export FFLAGS [ 62s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON -DLIBPATH=/usr/lib64 [ 63s] -- The C compiler identification is GNU 9.2.0 [ 63s] -- Check for working C compiler: /bin/cc [ 63s] -- Check for working C compiler: /bin/cc -- works [ 63s] -- Detecting C compiler ABI info [ 63s] -- Detecting C compiler ABI info - done [ 63s] -- Detecting C compile features [ 63s] -- Detecting C compile features - done [ 63s] -- Configuring done [ 63s] -- Generating done [ 63s] CMake Warning: [ 63s] Manually-specified variables were not used by the project: [ 63s] [ 63s] BUILD_SHARED_LIBS [ 63s] CMAKE_INSTALL_LIBDIR [ 63s] CMAKE_SKIP_RPATH [ 63s] INCLUDE_INSTALL_DIR [ 63s] LIB_INSTALL_DIR [ 63s] LIB_SUFFIX [ 63s] SHARE_INSTALL_PREFIX [ 63s] SYSCONF_INSTALL_DIR [ 63s] [ 63s] [ 63s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1 [ 63s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3 [ 63s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 63s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel clean [ 63s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 64s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 64s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 64s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3/ [ 64s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 64s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3/ M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel modules [ 64s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 64s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.o [ 65s] Building modules, stage 2. [ 65s] MODPOST 1 modules [ 65s] CC /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.mod.o [ 65s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.ko [ 65s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 65s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 65s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3 INSTALL_MOD_STRIP=1 [ 65s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 65s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/../ modules_install [ 65s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 66s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.ko [ 66s] DEPMOD 4.19.49-arm64-rpi3-v8 [ 66s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/..//lib/modules/4.19.49-arm64-rpi3-v8: No such file or directory [ 66s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/..//lib/modules/4.19.49-arm64-rpi3-v8: No such file or directory [ 66s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 66s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 66s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 [ 66s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 66s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel clean [ 66s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 67s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/Module.symvers [ 67s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 67s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 67s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 [ 67s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 68s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel modules [ 68s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 68s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.o [ 69s] Building modules, stage 2. [ 69s] MODPOST 1 modules [ 69s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.mod.o [ 69s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.ko [ 69s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 69s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 69s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 INSTALL_MOD_STRIP=1 [ 69s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 69s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/../ modules_install [ 69s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 70s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/proc-tsm.ko [ 70s] DEPMOD 5.4.50-arm64-rpi4-v8 [ 70s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/..//lib/modules/5.4.50-arm64-rpi4-v8: No such file or directory [ 70s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/..//lib/modules/5.4.50-arm64-rpi4-v8: No such file or directory [ 70s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 70s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 70s] + exit 0 [ 70s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lwNrhe [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd stability-monitor-kmod-rpi3-6.3.1 [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64 [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64 [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64//usr/lib64/stability-monitor [ 70s] + pushd lib/modules [ 70s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/lib/modules ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1 [ 70s] + find -name '*.ko' -exec cp -a --parents '{}' /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64//usr/lib64/stability-monitor/ ';' [ 70s] + popd [ 70s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1 [ 70s] + install -D config/stability-monitor.conf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64/etc/modprobe.d/stability-monitor.conf [ 70s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1 [ 71s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/stability-monitor-kmod-rpi3-debuginfo.manifest [ 71s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/stability-monitor-kmod-rpi3-debugsource.manifest [ 71s] + /usr/lib/rpm/check-buildroot [ 71s] + /usr/lib/rpm//brp-compress [ 71s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 71s] + /usr/lib/rpm/brp-python-hardlink [ 71s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64 [ 71s] Processing files: stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 71s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 71s] [ 71s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.U7hJad [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd stability-monitor-kmod-rpi3-6.3.1 [ 71s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64/usr/share/licenses/stability-monitor-kmod-rpi3 [ 71s] + export LICENSEDIR [ 71s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64/usr/share/licenses/stability-monitor-kmod-rpi3 [ 71s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64/usr/share/licenses/stability-monitor-kmod-rpi3 [ 71s] + exit 0 [ 71s] Provides: stability-monitor-kernel-module stability-monitor-kmod-rpi3 = 6.3.1-8.5 stability-monitor-kmod-rpi3(aarch-64) = 6.3.1-8.5 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Processing files: stability-monitor-kmod-rpi3-debugsource-6.3.1-8.5.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: stability-monitor-kmod-rpi3-debugsource = 6.3.1-8.5 stability-monitor-kmod-rpi3-debugsource(aarch-64) = 6.3.1-8.5 [ 71s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 71s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64 [ 71s] warning: Could not canonicalize hostname: obspw07 [ 71s] Wrote: /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.3.1-8.5.src.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/stability-monitor-kmod-rpi3-debugsource-6.3.1-8.5.aarch64.rpm [ 71s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MD6gud [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd stability-monitor-kmod-rpi3-6.3.1 [ 71s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64 [ 71s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64 [ 71s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi3 [ 71s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 71s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel clean [ 71s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 72s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/.tmp_versions [ 72s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel/Module.symvers [ 72s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi3' [ 72s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 72s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm64-rpi4 [ 72s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 72s] make -C /boot/kernel/devel/kernel-devel-arm64-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel clean [ 72s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 72s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm64-rpi4' [ 72s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.3.1/kernel' [ 72s] + rm -rf '/home/abuild/rpmbuild/BUILD/%{Name}-6.3.1/lib' [ 72s] + exit 0 [ 72s] ... checking for files with abuild user/group [ 72s] ... creating baselibs [ 73s] ... comparing built packages with the former built [ 73s] /usr/lib/build/pkg-diff.sh [ 73s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.3.1-8.4.src.rpm /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.3.1-8.5.src.rpm [ 73s] This is not a prerelease project. Compare the project name. [ 73s] comparing rpmtags [ 73s] comparing RELEASE [ 73s] comparing PROVIDES [ 73s] comparing scripts [ 73s] comparing filelist [ 73s] comparing file checksum [ 73s] RPM meta information is identical [ 73s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.3.1-8.4.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64.rpm [ 73s] Comparing stability-monitor-kmod-rpi3-6.3.1-8.4.aarch64.rpm to stability-monitor-kmod-rpi3-6.3.1-8.5.aarch64.rpm [ 73s] This is not a prerelease project. Compare the project name. [ 73s] comparing rpmtags [ 73s] comparing RELEASE [ 74s] comparing PROVIDES [ 74s] comparing scripts [ 74s] comparing filelist [ 74s] comparing file checksum [ 74s] creating rename script [ 74s] RPM file checksum differs. [ 74s] Extracting packages [ 74s] /usr/lib64/stability-monitor/4.19.49-arm64-rpi3-v8/extra/proc-tsm.ko differs in ELF section .comment [ 74s] --- /tmp/tmp.EXjao80870/tmp.tmAkF80969 2020-08-09 12:07:56.314248196 +0000 [ 74s] +++ /tmp/tmp.EXjao80870/tmp.QjmEl80971 2020-08-09 12:07:56.318248037 +0000 [ 74s] @@ -4,7 +4,7 @@ [ 74s] Contents of section .comment: [ 74s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 74s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 74s] - 0020 332e3229 20392e32 2e300000 4743433a 3.2) 9.2.0..GCC: [ 74s] + 0020 342e3129 20392e32 2e300000 4743433a 4.1) 9.2.0..GCC: [ 74s] 0030 20285469 7a656e20 47434320 392e322e (Tizen GCC 9.2. [ 74s] - 0040 30203230 31393038 31322033 2e322920 0 20190812 3.2) [ 74s] + 0040 30203230 31393038 31322034 2e312920 0 20190812 4.1) [ 74s] 0050 392e322e 3000 9.2.0. [ 74s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-debugsource-6.3.1-8.4.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/stability-monitor-kmod-rpi3-debugsource-6.3.1-8.5.aarch64.rpm [ 74s] Comparing stability-monitor-kmod-rpi3-debugsource-6.3.1-8.4.aarch64.rpm to stability-monitor-kmod-rpi3-debugsource-6.3.1-8.5.aarch64.rpm [ 74s] This is not a prerelease project. Compare the project name. [ 74s] comparing rpmtags [ 74s] comparing RELEASE [ 74s] comparing PROVIDES [ 74s] comparing scripts [ 74s] comparing filelist [ 74s] comparing file checksum [ 74s] creating rename script [ 74s] RPM meta information is identical [ 74s] [ 74s] obspw07 finished "build stability-monitor-kmod-rpi3.spec" at Sun Aug 9 12:07:56 UTC 2020. [ 74s] Retried build at Mon Aug 10 12:47:03 2020 returned same result, skipped Retried build at Tue Aug 11 05:23:31 2020 returned same result, skipped Retried build at Wed Aug 12 14:57:31 2020 returned same result, skipped Retried build at Fri Aug 14 12:51:30 2020 returned same result, skipped Retried build at Wed Aug 19 04:22:53 2020 returned same result, skipped Retried build at Mon Aug 24 03:21:29 2020 returned same result, skipped Retried build at Tue Aug 25 03:54:10 2020 returned same result, skipped Retried build at Tue Aug 25 14:51:54 2020 returned same result, skipped Retried build at Fri Sep 11 04:56:03 2020 returned same result, skipped