[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_5 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obsnw10 started "build _service:gbs:xmlsec1.spec" at Mon Sep 28 07:04:02 UTC 2020. [ 1s] [ 1s] Building xmlsec1 for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '4b559e75460f172ebedb56fab9a0a99d' [ 1s] [ 1s] processing recipe /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_5/.build.rpmlist /var/cache/build/root_5/.build-srcdir/_service:gbs:xmlsec1.spec build rpmlint-Factory ... [ 2s] copying qemu [ 2s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 2s] [ 2s] registering binfmt handlers for cross build [ 2s] write: Invalid argument [ 2s] /proc/sys/fs/binfmt_misc/register: write failed [ 2s] /var/run/obs/worker/5/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 2s] [ 2s] /.build/qemu-reg: No such file or directory [ 2s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 2s] /usr/lib/build/qemu-reg: No such file or directory [ 2s] /usr/lib/build/qemu-reg: binfmt registration failed [ 3s] cycle: libsoftokn3 -> nss [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/40] preinstalling libmagic-data... [ 3s] [2/40] preinstalling libncurses... [ 3s] [3/40] preinstalling setup... [ 3s] [4/40] preinstalling filesystem... [ 3s] [5/40] preinstalling glibc... [ 3s] [6/40] preinstalling libgcc... [ 3s] [7/40] preinstalling bash... [ 3s] [8/40] preinstalling diffutils... [ 3s] [9/40] preinstalling grep... [ 3s] [10/40] preinstalling libattr... [ 3s] [11/40] preinstalling libblkid... [ 3s] [12/40] preinstalling libbz2... [ 3s] [13/40] preinstalling libcap... [ 3s] [14/40] preinstalling libfreebl3... [ 3s] [15/40] preinstalling liblua... [ 3s] [16/40] preinstalling liblzma... [ 3s] [17/40] preinstalling libpopt... [ 3s] [18/40] preinstalling libreadline... [ 3s] [19/40] preinstalling libsmack... [ 3s] [20/40] preinstalling libsqlite... [ 3s] [21/40] preinstalling libuuid... [ 3s] [22/40] preinstalling nspr... [ 3s] [23/40] preinstalling sed... [ 3s] [24/40] preinstalling zlib... [ 3s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 10s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 11s] [27/40] preinstalling coreutils... [ 11s] [28/40] preinstalling libacl... [ 11s] [29/40] preinstalling libelf... [ 11s] [30/40] preinstalling libmount... [ 11s] [31/40] preinstalling smack... [ 11s] [32/40] preinstalling bzip2... [ 11s] [33/40] preinstalling libmagic... [ 11s] [34/40] preinstalling libxml2... [ 11s] [35/40] preinstalling tar... [ 11s] [36/40] preinstalling util-linux... [ 12s] [37/40] preinstalling util-linux-su... [ 12s] [38/40] preinstalling nss... [ 12s] [39/40] preinstalling libsoftokn3... [ 12s] [40/40] preinstalling rpm... [ 12s] [ 16s] running qemu-linux-user-x86_64-cross postinstall script [ 16s] running qemu-accel-x86_64-armv7l postinstall script [ 19s] running setup postinstall script [ 19s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 19s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 19s] initializing rpm db... [ 22s] reordering...cycle: libsoftokn3 -> nss [ 22s] breaking dependency nss -> libsoftokn3 [ 22s] done [ 25s] [1/109] installing libmagic-data-5.37-3.49 [ 27s] [2/109] installing setup-0.9-4.3 [ 27s] warning: /etc/profile created as /etc/profile.rpmnew [ 27s] [3/109] installing filesystem-3.1-3.1 [ 29s] [4/109] installing glibc-2.30-5.3 [ 33s] [5/109] installing libatomic-9.2.0-6.2 [ 37s] [6/109] installing libgcc-9.2.0-6.2 [ 42s] [7/109] installing bash-3.2.57-4.2 [ 43s] [8/109] installing cpio-2.11-3.1 [ 43s] [9/109] installing diffutils-3.3-3.1 [ 43s] [10/109] installing fdupes-1.40-3.62 [ 45s] [11/109] installing findutils-4.3.8-3.54 [ 45s] [12/109] installing gdbm-1.8.3-3.63 [ 48s] [13/109] installing hostname-3.23-3.1 [ 48s] [14/109] installing libattr-2.4.47-3.61 [ 49s] [15/109] installing libblkid-2.34-4.5 [ 49s] [16/109] installing libbz2-1.0.8-4.9 [ 50s] [17/109] installing libcap-2.24-3.60 [ 50s] [18/109] installing libext2fs-1.43.4-3.1 [ 50s] [19/109] installing libfreebl3-3.34.1-3.38 [ 50s] [20/109] installing libgfortran-9.2.0-6.2 [ 51s] [21/109] installing libgomp-9.2.0-6.2 [ 51s] [22/109] installing libgpg-error-1.27-1.1 [ 51s] [23/109] installing libitm-9.2.0-6.2 [ 52s] [24/109] installing libltdl-2.4.2-3.33 [ 52s] [25/109] installing liblua-5.1.5-3.65 [ 52s] [26/109] installing liblzma-5.2.4-3.49 [ 53s] [27/109] installing libopenssl11-1.1.1g-3.41 [ 53s] [28/109] installing libpcre-8.43-3.9 [ 53s] [29/109] installing libpopt-1.16-3.61 [ 53s] [30/109] installing libsmack-1.3.1-3.58 [ 54s] [31/109] installing libsmartcols-2.34-4.5 [ 54s] [32/109] installing libsqlite-3.31.1-3.48 [ 55s] [33/109] installing libstdc++-9.2.0-6.2 [ 55s] [34/109] installing libuuid-2.34-4.5 [ 55s] [35/109] installing m4-1.4.17-2.1 [ 55s] [36/109] installing net-tools-2.0_20121208git-3.1 [ 55s] [37/109] installing nspr-4.12-3.59 [ 56s] [38/109] installing patch-2.7-3.54 [ 56s] [39/109] installing pkg-config-0.28-3.51 [ 56s] [40/109] installing sed-4.1c-3.1 [ 56s] [41/109] installing update-alternatives-1.18.15-2.1 [ 56s] [42/109] installing which-2.20-3.1 [ 56s] [43/109] installing zlib-1.2.11-3.54 [ 57s] [44/109] installing build-compare-2015.04.28-3.17 [ 57s] [45/109] installing libstdc++-devel-9.2.0-6.2 [ 57s] [46/109] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 61s] [47/109] installing terminfo-base-full-6.1_20191207-3.42 [ 61s] [48/109] installing cpp-9.2.0-6.2 [ 62s] [49/109] installing gcc-c++-9.2.0-6.2 [ 63s] [50/109] installing xz-devel-5.2.4-3.49 [ 63s] [51/109] installing binutils-2.33.1-6.3 [ 63s] [52/109] installing coreutils-6.9-4.7 [ 63s] [53/109] installing gawk-3.1.5-4.1 [ 63s] [54/109] installing grep-2.5.2-3.1 [ 63s] [55/109] installing libacl-2.2.52-3.58 [ 63s] [56/109] installing libcc1-9.2.0-6.2 [ 64s] [57/109] installing libelf-0.178-3.9 [ 64s] [58/109] installing libgcrypt-1.8.3-1.2 [ 64s] [59/109] installing libmount-2.34-4.5 [ 65s] [60/109] installing libubsan-9.2.0-6.2 [ 65s] [61/109] installing make-4.0-2.9 [ 65s] [62/109] installing nss-certs-3.34.1-3.38 [ 65s] [63/109] installing smack-1.3.1-3.58 [ 65s] [64/109] installing bzip2-1.0.8-4.9 [ 65s] [65/109] installing libfdisk-2.34-4.5 [ 66s] [66/109] installing libmagic-5.37-3.49 [ 66s] [67/109] installing libxml2-2.9.10-3.47 [ 66s] [68/109] installing perl-5.30.0-2.27 [ 68s] [69/109] installing xz-5.2.4-3.49 [ 68s] [70/109] installing build-mkbaselibs-20120927-3.1 [ 68s] [71/109] installing linux-glibc-devel-3.10-3.61 [ 69s] [72/109] installing autoconf-2.69-3.32 [ 70s] [73/109] installing file-5.37-3.49 [ 70s] [74/109] installing glibc-locale-2.30-5.3 [ 71s] [75/109] installing tar-1.17-2.1 [ 71s] [76/109] installing gzip-1.3.12-3.60 [ 71s] [77/109] installing libncurses6-6.1_20191207-3.42 [ 71s] [78/109] installing pam-1.1.6-3.1 [ 72s] [79/109] installing tzdata-2019c-2.1 [ 72s] [80/109] installing libdw-0.178-3.9 [ 72s] [81/109] installing libxslt-1.1.34-1.1 [ 73s] [82/109] installing gcc-9.2.0-6.2 [ 73s] [83/109] installing libncurses-6.1_20191207-3.42 [ 73s] [84/109] installing glibc-devel-2.30-5.3 [ 73s] [85/109] installing qemu-accel-x86_64-armv7l-0.4-1.3 [ 82s] [86/109] installing automake-1.15.1-3.38 [ 82s] [87/109] installing less-466-3.1 [ 82s] [88/109] installing libreadline-5.2-2.57 [ 83s] [89/109] installing procps-ng-3.3.15-2.1 [ 84s] [90/109] installing libasm-0.178-3.9 [ 84s] [91/109] installing libxslt-tools-1.1.34-1.1 [ 84s] [92/109] installing build-20120927-3.1 [ 84s] [93/109] installing ncurses-devel-6.1_20191207-3.42 [ 84s] [94/109] installing readline-devel-5.2-2.57 [ 84s] [95/109] installing zlib-devel-1.2.11-3.54 [ 84s] [96/109] installing libtool-2.4.2-3.33 [ 84s] [97/109] installing libxml2-tools-2.9.10-3.47 [ 84s] [98/109] installing libgpg-error-devel-1.27-1.1 [ 84s] [99/109] installing elfutils-0.178-3.9 [ 84s] [100/109] installing util-linux-2.34-4.5 [ 85s] [101/109] installing libopenssl1.1-devel-1.1.1g-3.41 [ 85s] [102/109] installing util-linux-su-2.34-4.5 [ 85s] [103/109] installing libgcrypt-devel-1.8.3-1.2 [ 85s] [104/109] installing libxml2-devel-2.9.10-3.47 [ 85s] [105/109] installing libxslt-devel-1.1.34-1.1 [ 85s] [106/109] installing nss-3.34.1-3.38 [ 86s] [107/109] installing libsoftokn3-3.34.1-3.38 [ 87s] [108/109] installing rpm-4.11.0.1-2.29 [ 90s] [109/109] installing rpm-build-4.11.0.1-2.29 [ 90s] removing nis flags from /var/cache/build/root_5/etc/nsswitch.conf... [ 90s] now finalizing build dir... [ 91s] Running build time source services... [ 91s] build target is armv7l-tizen-linux [ 91s] ----------------------------------------------------------------- [ 91s] I have the following modifications for xmlsec1.spec: [ 91s] 5c5 [ 91s] < Release: 0 [ 91s] --- [ 91s] > Release: 7.43 [ 91s] 136a137 [ 91s] > %changelog [ 91s] ----------------------------------------------------------------- [ 91s] ----- building xmlsec1.spec (user abuild) [ 91s] ----------------------------------------------------------------- [ 91s] ----------------------------------------------------------------- [ 91s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/4b559e75460f172ebedb56fab9a0a99d-xmlsec1' -ba /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 91s] Building target platforms: armv7l-tizen-linux [ 91s] Building for target armv7l-tizen-linux [ 91s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.c9fmqq [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + rm -rf xmlsec1-1.2.28 [ 91s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.28.tar.gz [ 91s] + /bin/tar -xf - [ 92s] + STATUS=0 [ 92s] + '[' 0 -ne 0 ']' [ 92s] + cd xmlsec1-1.2.28 [ 92s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 92s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 92s] + exit 0 [ 92s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Kps0Qs [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd xmlsec1-1.2.28 [ 92s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CFLAGS [ 92s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CXXFLAGS [ 92s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 92s] + export FFLAGS [ 92s] + LDFLAGS= [ 92s] + export LDFLAGS [ 92s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CFLAGS [ 92s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CXXFLAGS [ 92s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 92s] + export FFLAGS [ 92s] + autoreconf -v --install --force [ 94s] autoreconf: Entering directory `.' [ 94s] autoreconf: configure.ac: not using Gettext [ 95s] autoreconf: running: aclocal --force -I m4 [ 104s] autoreconf: configure.ac: tracing [ 105s] autoreconf: running: libtoolize --copy --force [ 105s] libtoolize: putting auxiliary files in `.'. [ 105s] libtoolize: copying file `./ltmain.sh' [ 105s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 105s] libtoolize: copying file `m4/libtool.m4' [ 106s] libtoolize: copying file `m4/ltoptions.m4' [ 106s] libtoolize: copying file `m4/ltsugar.m4' [ 106s] libtoolize: copying file `m4/ltversion.m4' [ 106s] libtoolize: copying file `m4/lt~obsolete.m4' [ 115s] autoreconf: running: /usr/bin/autoconf --force [ 120s] autoreconf: running: /usr/bin/autoheader --force [ 123s] autoreconf: running: automake --add-missing --copy --force-missing [ 125s] configure.ac:37: installing './compile' [ 125s] configure.ac:14: installing './config.guess' [ 125s] configure.ac:14: installing './config.sub' [ 125s] configure.ac:25: installing './install-sh' [ 126s] configure.ac:25: installing './missing' [ 126s] apps/Makefile.am: installing './depcomp' [ 136s] autoreconf: Leaving directory `.' [ 136s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 136s] configure: WARNING: unrecognized options: --enable-dynamic [ 136s] checking build system type... armv7l-tizen-linux-gnueabi [ 136s] checking host system type... armv7l-tizen-linux-gnueabi [ 136s] checking for a BSD-compatible install... /bin/install -c [ 136s] checking whether build environment is sane... yes [ 136s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 136s] checking for gawk... gawk [ 136s] checking whether make sets $(MAKE)... yes [ 136s] checking whether make supports nested variables... yes [ 136s] checking whether UID '399' is supported by ustar format... yes [ 136s] checking whether GID '399' is supported by ustar format... yes [ 136s] checking how to create a ustar tar archive... gnutar [ 136s] checking whether to enable maintainer-specific portions of Makefiles... no [ 136s] checking whether make supports nested variables... (cached) yes [ 136s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 136s] checking whether the C compiler works... yes [ 136s] checking for C compiler default output file name... a.out [ 136s] checking for suffix of executables... [ 136s] checking whether we are cross compiling... no [ 136s] checking for suffix of object files... o [ 136s] checking whether we are using the GNU C compiler... yes [ 136s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 136s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 136s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 136s] checking for style of include used by make... GNU [ 137s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 137s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 137s] checking for grep that handles long lines and -e... /bin/grep [ 137s] checking for egrep... /bin/grep -E [ 137s] checking for ANSI C header files... yes [ 137s] checking how to print strings... printf [ 137s] checking for a sed that does not truncate output... /bin/sed [ 137s] checking for fgrep... /bin/grep -F [ 137s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 137s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 137s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 137s] checking the name lister (/bin/nm -B) interface... BSD nm [ 137s] checking whether ln -s works... yes [ 137s] checking the maximum length of command line arguments... 1572864 [ 137s] checking whether the shell understands some XSI constructs... yes [ 137s] checking whether the shell understands "+="... yes [ 137s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 137s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 137s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 137s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 137s] checking for objdump... objdump [ 137s] checking how to recognize dependent libraries... pass_all [ 137s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 137s] checking for dlltool... no [ 137s] checking how to associate runtime and link libraries... printf %s\n [ 137s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 137s] checking for ar... ar [ 137s] checking for archiver @FILE support... @ [ 137s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 137s] checking for strip... strip [ 137s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 137s] checking for ranlib... ranlib [ 137s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 137s] checking for sysroot... no [ 137s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 137s] checking for mt... no [ 137s] checking if : is a manifest tool... no [ 137s] checking for sys/types.h... yes [ 137s] checking for sys/stat.h... yes [ 137s] checking for stdlib.h... yes [ 137s] checking for string.h... yes [ 137s] checking for memory.h... yes [ 137s] checking for strings.h... yes [ 137s] checking for inttypes.h... yes [ 137s] checking for stdint.h... yes [ 137s] checking for unistd.h... yes [ 137s] checking for dlfcn.h... yes [ 137s] checking for objdir... .libs [ 137s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 137s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 137s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 137s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 138s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 138s] checking whether -lc should be explicitly linked in... no [ 138s] checking dynamic linker characteristics... GNU/Linux ld.so [ 138s] checking how to hardcode library paths into programs... immediate [ 138s] checking whether stripping libraries is possible... yes [ 138s] checking if libtool supports shared libraries... yes [ 138s] checking whether to build shared libraries... yes [ 138s] checking whether to build static libraries... yes [ 138s] checking for cp... /bin/cp [ 138s] checking for mv... /bin/mv [ 138s] checking for tar... /bin/tar [ 138s] checking for perl... /bin/perl [ 138s] checking for help2man... no [ 138s] checking for xsltproc... /bin/xsltproc [ 138s] checking for man2html... no [ 138s] checking for gtkdoc-mkhtml... no [ 138s] checking for gtkdoc-mkdb... no [ 138s] checking for gtkdoc-scan... no [ 138s] checking for dirent.h that defines DIR... yes [ 138s] checking for library containing opendir... none required [ 138s] checking for ANSI C header files... (cached) yes [ 138s] checking stdio.h usability... yes [ 138s] checking stdio.h presence... yes [ 138s] checking for stdio.h... yes [ 138s] checking for stdlib.h... (cached) yes [ 138s] checking for string.h... (cached) yes [ 138s] checking ctype.h usability... yes [ 138s] checking ctype.h presence... yes [ 138s] checking for ctype.h... yes [ 138s] checking errno.h usability... yes [ 138s] checking errno.h presence... yes [ 138s] checking for errno.h... yes [ 138s] checking ansidecl.h usability... no [ 138s] checking ansidecl.h presence... no [ 138s] checking for ansidecl.h... no [ 138s] checking time.h usability... yes [ 138s] checking time.h presence... yes [ 138s] checking for time.h... yes [ 138s] checking for strchr... yes [ 138s] checking for strrchr... yes [ 138s] checking for printf... yes [ 138s] checking for sprintf... yes [ 139s] checking for fprintf... yes [ 139s] checking for snprintf... yes [ 139s] checking for vfprintf... yes [ 139s] checking for vsprintf... yes [ 139s] checking for vsnprintf... yes [ 139s] checking for sscanf... yes [ 139s] checking for timegm... yes [ 139s] checking for development environment... disabled [ 139s] checking for man pages build... disabled [ 139s] checking for docs build... disabled [ 139s] checking for shared library suffix... .so [ 139s] checking for __FUNCTION__ or __func__... __func__ [ 139s] checking size of size_t... 4 [ 139s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 139s] checking pkg-config is at least version 0.9.0... yes [ 139s] checking for LIBXML... yes [ 139s] checking for libxml2 library >= 2.8.0... yes [ 140s] checking for LIBXSLT... yes [ 140s] checking for libxslt library >= 1.0.20... yes [ 140s] checking for OPENSSL... no [ 140s] checking for openssl library installation in the typical folders... yes ("-I/usr/include -L/usr/lib") [ 140s] checking for openssl library >= 1.0.0... yes (openssl version '1.1.0') [ 140s] checking for NSPR... no [ 140s] checking for NSPR... no [ 140s] checking for NSPR... no [ 140s] checking for NSPR... no [ 140s] checking for NSS... no [ 140s] checking for NSS... no [ 140s] checking for NSS... no [ 141s] checking for NSS... no [ 141s] checking for nspr library installation in the typical folders... not found [ 141s] checking for nss library installation in the typical folders... not found [ 141s] checking for nspr library installation... not found [ 141s] checking for nss library installation... not found [ 141s] checking for nspr library >= 4.4.1... no [ 141s] checking for nss library >= 3.11.1... no [ 141s] checking for GCRYPT... no [ 141s] checking for GCRYPT... no [ 141s] checking for GCRYPT... no [ 141s] checking for GCRYPT... no [ 141s] checking for libgcrypt-config... /bin/libgcrypt-config [ 141s] checking for libgcrypt library >= 1.4.0... yes [ 141s] checking for libgnutls library >= 2.8.0... disabled [ 142s] checking for mscrypto... not found [ 142s] checking for mscng... not found [ 142s] checking for default crypto library... yes ("openssl") [ 142s] checking for MD5 support... yes [ 142s] checking for RIPEMD-160 support... yes [ 142s] checking for SHA1 support... yes [ 142s] checking for SHA224 support... yes [ 142s] checking for SHA256 support... yes [ 142s] checking for SHA384 support... yes [ 142s] checking for SHA512 support... yes [ 142s] checking for HMAC support... yes [ 142s] checking for DSA support... yes [ 142s] checking for RSA support... yes [ 142s] checking for x509 support... yes [ 142s] checking for DES support... yes [ 142s] checking for AES support... yes [ 142s] checking for GOST support... disabled [ 142s] checking for EXPERMIENTAL GOST2012 support... disabled [ 142s] checking for XMLDSig support... yes [ 142s] checking for XMLEnc support... yes [ 142s] checking for soap support... disabled [ 142s] checking for mans... yes [ 142s] checking for docs... yes [ 142s] checking for apps... yes [ 142s] checking for static linking... disabled [ 142s] checking for xmlsec-crypto dynamic loading support... disabled [ 142s] checking for xmlsec-crypto dynamic loading support in command line tool... disabled [ 142s] checking for docs folder... $(htmldir) [ 142s] checking for Simple Keys Manager testing... yes [ 142s] checking for templates testing... yes [ 142s] checking for debugging... disabled [ 142s] checking for warnings as errors... disabled [ 142s] checking for profiling... disabled [ 142s] checking for pedantic... disabled [ 142s] checking that generated files are newer than configure... done [ 142s] configure: creating ./config.status [ 142s] config.status: creating include/xmlsec/openssl/Makefile [ 142s] config.status: creating src/openssl/Makefile [ 142s] config.status: creating include/xmlsec/gcrypt/Makefile [ 142s] config.status: creating src/gcrypt/Makefile [ 142s] config.status: creating include/xmlsec/version.h [ 142s] config.status: creating Makefile [ 142s] config.status: creating include/Makefile [ 142s] config.status: creating include/xmlsec/Makefile [ 142s] config.status: creating include/xmlsec/private/Makefile [ 142s] config.status: creating src/Makefile [ 142s] config.status: creating apps/Makefile [ 143s] config.status: creating docs/Makefile [ 143s] config.status: creating docs/api/Makefile [ 143s] config.status: creating man/Makefile [ 143s] config.status: creating xmlsec1-openssl.pc [ 143s] config.status: creating xmlsec1-gnutls.pc [ 143s] config.status: creating xmlsec1-gcrypt.pc [ 143s] config.status: creating xmlsec1-nss.pc [ 143s] config.status: creating xmlsec1.spec [ 143s] config.status: creating xmlsec1Conf.sh [ 143s] config.status: creating xmlsec1-config [ 143s] config.status: creating config.h [ 143s] config.status: executing depfiles commands [ 144s] config.status: executing libtool commands [ 144s] configure: WARNING: unrecognized options: --enable-dynamic [ 144s] + /bin/make -j4 CFLAGS+=-fPIE LDFLAGS+=-pie [ 144s] /bin/make all-recursive [ 144s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 144s] Making all in include [ 144s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 144s] Making all in xmlsec [ 144s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 144s] Making all in private [ 144s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 144s] make[4]: Nothing to be done for 'all'. [ 144s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 144s] Making all in openssl [ 144s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 144s] make[4]: Nothing to be done for 'all'. [ 144s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 144s] Making all in gcrypt [ 144s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 144s] make[4]: Nothing to be done for 'all'. [ 144s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 144s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 144s] make[4]: Nothing to be done for 'all-am'. [ 144s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 144s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 144s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 144s] make[3]: Nothing to be done for 'all-am'. [ 144s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 144s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 144s] Making all in src [ 144s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 144s] Making all in . [ 144s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 144s] CC app.lo [ 144s] CC base64.lo [ 144s] CC bn.lo [ 144s] CC buffer.lo [ 145s] CC c14n.lo [ 145s] CC dl.lo [ 145s] CC enveloped.lo [ 145s] CC errors.lo [ 145s] CC io.lo [ 145s] CC keyinfo.lo [ 145s] CC keys.lo [ 145s] CC keysdata.lo [ 145s] CC keysmngr.lo [ 146s] CC kw_aes_des.lo [ 146s] CC list.lo [ 146s] CC membuf.lo [ 146s] CC nodeset.lo [ 146s] CC parser.lo [ 146s] CC relationship.lo [ 146s] CC strings.lo [ 147s] CC templates.lo [ 147s] CC transforms.lo [ 147s] CC x509.lo [ 147s] CC xmldsig.lo [ 147s] CC xmlenc.lo [ 148s] CC xmlsec.lo [ 148s] CC xmltree.lo [ 148s] CC xpath.lo [ 148s] CC xslt.lo [ 149s] CCLD libxmlsec1.la [ 149s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 149s] Making all in openssl [ 149s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 149s] CC libxmlsec1_openssl_la-app.lo [ 149s] CC libxmlsec1_openssl_la-bn.lo [ 149s] CC libxmlsec1_openssl_la-ciphers.lo [ 149s] CC libxmlsec1_openssl_la-crypto.lo [ 149s] CC libxmlsec1_openssl_la-digests.lo [ 149s] CC libxmlsec1_openssl_la-evp.lo [ 150s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 150s] CC libxmlsec1_openssl_la-hmac.lo [ 150s] CC libxmlsec1_openssl_la-kw_aes.lo [ 150s] CC libxmlsec1_openssl_la-kw_des.lo [ 150s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 151s] CC libxmlsec1_openssl_la-signatures.lo [ 151s] CC libxmlsec1_openssl_la-symkeys.lo [ 151s] CC libxmlsec1_openssl_la-x509.lo [ 151s] CC libxmlsec1_openssl_la-x509vfy.lo [ 153s] CCLD libxmlsec1-openssl.la [ 153s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 153s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 153s] Making all in gcrypt [ 153s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 153s] CC libxmlsec1_gcrypt_la-app.lo [ 153s] CC libxmlsec1_gcrypt_la-asn1.lo [ 153s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 153s] CC libxmlsec1_gcrypt_la-crypto.lo [ 153s] CC libxmlsec1_gcrypt_la-digests.lo [ 153s] CC libxmlsec1_gcrypt_la-hmac.lo [ 153s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 153s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 154s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 154s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 154s] CC libxmlsec1_gcrypt_la-signatures.lo [ 155s] CCLD libxmlsec1-gcrypt.la [ 155s] libtool: link: warning: `/lib/libxml2.la' seems to be moved [ 155s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 155s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 155s] Making all in apps [ 155s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 155s] CC xmlsec.o [ 155s] CC crypto.o [ 155s] CC cmdline.o [ 156s] CCLD xmlsec1 [ 156s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 156s] Making all in man [ 156s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 156s] make[2]: Nothing to be done for 'all'. [ 156s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 156s] Making all in docs [ 156s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 156s] Making all in api [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 156s] Copying api-docs... [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 156s] make[3]: Nothing to be done for 'all-am'. [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 156s] ======= Run 'make docs' in the xmlsec/docs folder to rebuild docs [ 156s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 156s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 156s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 156s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 156s] + exit 0 [ 156s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.2zrqSr [ 156s] + umask 022 [ 156s] + cd /home/abuild/rpmbuild/BUILD [ 156s] + cd xmlsec1-1.2.28 [ 156s] + LANG=C [ 156s] + export LANG [ 156s] + unset DISPLAY [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm [ 156s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm [ 156s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm install [ 156s] Making install in include [ 156s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 156s] Making install in xmlsec [ 156s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] Making install in private [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 156s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 156s] /bin/make install-exec-hook [ 156s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 156s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/private [ 156s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 156s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/private' [ 156s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/private' [ 156s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 156s] Making install in openssl [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 156s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 156s] /bin/make install-exec-hook [ 156s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 156s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/openssl [ 156s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 156s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/openssl' [ 156s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/openssl' [ 156s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 156s] Making install in gcrypt [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 156s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 156s] /bin/make install-exec-hook [ 156s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 156s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/gcrypt [ 156s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 156s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 156s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec/gcrypt' [ 156s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] /bin/make install-exec-hook [ 156s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec [ 156s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec' [ 156s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/include/xmlsec1/xmlsec' [ 156s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 156s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 156s] make[3]: Nothing to be done for 'install-exec-am'. [ 156s] make[3]: Nothing to be done for 'install-data-am'. [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 156s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 156s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 156s] Making install in src [ 156s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 156s] Making install in . [ 156s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 156s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 156s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 156s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.28 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1.so.1.2.28 [ 156s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so.1; }; }) [ 156s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so; }; }) [ 156s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1.la [ 156s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1.a [ 156s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1.a [ 156s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1.a [ 156s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 156s] make[3]: Nothing to be done for 'install-data-am'. [ 156s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 156s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 156s] Making install in openssl [ 156s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 156s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 156s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 156s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 156s] libtool: install: warning: relinking `libxmlsec1-openssl.la' [ 156s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-openssl.la -rpath /usr/lib libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -Wl,-rpath-link -Wl,/usr/lib -L/usr/lib -lcrypto -ldl -lxslt -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm) [ 157s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 157s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-openssl.so.1.2.28 [ 157s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1; }; }) [ 157s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so; }; }) [ 157s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-openssl.la [ 157s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-openssl.a [ 157s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-openssl.a [ 157s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-openssl.a [ 157s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 157s] make[3]: Nothing to be done for 'install-data-am'. [ 157s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 157s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 157s] Making install in gcrypt [ 157s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 157s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 157s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 157s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 157s] libtool: install: warning: relinking `libxmlsec1-gcrypt.la' [ 157s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt; /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-gcrypt.la -rpath /usr/lib libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -lgcrypt -lgpg-error -lxslt -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm) [ 157s] libtool: relink: warning: `/lib/libxml2.la' seems to be moved [ 157s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.28 [ 157s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1; }; }) [ 157s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so; }; }) [ 157s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-gcrypt.la [ 157s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-gcrypt.a [ 157s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-gcrypt.a [ 157s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-gcrypt.a [ 157s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 157s] make[3]: Nothing to be done for 'install-data-am'. [ 157s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 157s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 157s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 157s] Making install in apps [ 157s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 157s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 157s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/bin' [ 157s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/bin' [ 157s] libtool: install: warning: `../src/openssl/libxmlsec1-openssl.la' has not been installed in `/usr/lib' [ 157s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/libxmlsec1.la' has not been installed in `/usr/lib' [ 157s] libtool: install: warning: `../src/libxmlsec1.la' has not been installed in `/usr/lib' [ 157s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/bin/xmlsec1 [ 157s] make[2]: Nothing to be done for 'install-data-am'. [ 157s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 157s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 157s] Making install in man [ 157s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 157s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 157s] make[2]: Nothing to be done for 'install-exec-am'. [ 157s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/man/man1' [ 157s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/man/man1' [ 157s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 157s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 157s] Making install in docs [ 157s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 157s] Making install in api [ 157s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 157s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 157s] make[3]: Nothing to be done for 'install-exec-am'. [ 157s] make[3]: Nothing to be done for 'install-data-am'. [ 157s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 157s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 157s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 157s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 157s] make[3]: Nothing to be done for 'install-exec-am'. [ 157s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1 [ 157s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1/images [ 157s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1/api [ 157s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1/api/images [ 157s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1 [ 157s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1 [ 157s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1/images [ 157s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1/api [ 157s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 157s] Makefile:831: recipe for target 'install-data-local' failed [ 157s] make[3]: [install-data-local] Error 1 (ignored) [ 157s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1/api/images [ 157s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 157s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 157s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 157s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 157s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 157s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/bin' [ 157s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/bin' [ 157s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 157s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib' [ 157s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/aclocal' [ 157s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/aclocal' [ 157s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig' [ 157s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig' [ 157s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 157s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 157s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/info/dir [ 157s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm -regex '.*\.la$' [ 157s] + xargs rm -f -- [ 157s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/info [ 157s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/packages [ 157s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1 [ 157s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc/xmlsec1-1.2.28 [ 157s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/gtk-doc [ 157s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/doc [ 157s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/man [ 157s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm -regex '.*/man/man./.*.[0-9]' [ 157s] + xargs rm -f -- [ 157s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm -regex '.*/man/../man./.*.[0-9]' [ 157s] + xargs rm -f -- [ 157s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm -regex '.*/man/man./.*.[0-9]pm' [ 157s] + xargs rm -f -- [ 157s] + _target= [ 157s] + _symlinks=0 [ 157s] + _files=() [ 157s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm [ 157s] + read _file [ 157s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 157s] + _files+=($_file) [ 157s] + read _file [ 157s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1.pc [ 157s] + _files+=($_file) [ 157s] + read _file [ 157s] + test -z [ 157s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 157s] ++ for i in '${_files[*]}' [ 157s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 157s] ++ for i in '${_files[*]}' [ 157s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1.pc [ 157s] ++ sort [ 157s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc [ 157s] ++ seq 1 1 [ 157s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 157s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1.pc [ 157s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1.pc [ 157s] + test 0 = 1 [ 157s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/pkgconfig/xmlsec1.pc [ 157s] + _files=() [ 157s] + read _file [ 157s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28 [ 158s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/bin/xmlsec1 [ 158s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-gcrypt.so.1.2.28 [ 158s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1-openssl.so.1.2.28 [ 158s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/lib/libxmlsec1.so.1.2.28 [ 158s] 4190 blocks [ 158s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debuginfo.manifest [ 159s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debugsource.manifest [ 159s] + /usr/lib/rpm/check-buildroot [ 159s] + /usr/lib/rpm//brp-compress [ 159s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 159s] + /usr/lib/rpm/brp-python-hardlink [ 159s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm [ 159s] Processing files: xmlsec1-1.2.28-7.43.armv7l [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.8OLrzr [ 159s] + umask 022 [ 159s] + cd /home/abuild/rpmbuild/BUILD [ 159s] + cd xmlsec1-1.2.28 [ 159s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1 [ 159s] + export LICENSEDIR [ 159s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1 [ 159s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1 [ 159s] + exit 0 [ 159s] Provides: libxmlsec1.so.1 xmlsec1 = 1.2.28-7.43 xmlsec1(armv7l-32) = 1.2.28-7.43 [ 159s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 159s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 159s] Requires(post): /sbin/ldconfig [ 159s] Requires(postun): /sbin/ldconfig [ 159s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblzma.so.5 libm.so.6 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.12) libxml2.so.2(LIBXML2_2.6.2) libxmlsec1-openssl.so.1 libxmlsec1.so.1 libxslt.so.1 libxslt.so.1(LIBXML2_1.0.11) libxslt.so.1(LIBXML2_1.0.22) libz.so.1 rtld(GNU_HASH) [ 159s] Processing files: xmlsec1-debugsource-1.2.28-7.43.armv7l [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Provides: xmlsec1-debugsource = 1.2.28-7.43 xmlsec1-debugsource(armv7l-32) = 1.2.28-7.43 [ 159s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 159s] Processing files: xmlsec1-gcrypt-1.2.28-7.43.armv7l [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.NuRzAs [ 159s] + umask 022 [ 159s] + cd /home/abuild/rpmbuild/BUILD [ 159s] + cd xmlsec1-1.2.28 [ 159s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-gcrypt [ 159s] + export LICENSEDIR [ 159s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-gcrypt [ 159s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-gcrypt [ 159s] + exit 0 [ 159s] Provides: libxmlsec1-gcrypt.so.1 xmlsec1-gcrypt = 1.2.28-7.43 xmlsec1-gcrypt(armv7l-32) = 1.2.28-7.43 [ 159s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 159s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 159s] Requires(post): /sbin/ldconfig [ 159s] Requires(postun): /sbin/ldconfig [ 159s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgcrypt.so.20 libgcrypt.so.20(GCRYPT_1.6) libgpg-error.so.0 liblzma.so.5 libm.so.6 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxmlsec1.so.1 libxslt.so.1 libz.so.1 rtld(GNU_HASH) [ 159s] Processing files: xmlsec1-openssl-1.2.28-7.43.armv7l [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.UXDtVo [ 159s] + umask 022 [ 159s] + cd /home/abuild/rpmbuild/BUILD [ 159s] + cd xmlsec1-1.2.28 [ 159s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-openssl [ 159s] + export LICENSEDIR [ 159s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-openssl [ 159s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-openssl [ 159s] + exit 0 [ 159s] Provides: libxmlsec1-openssl.so.1 xmlsec1-openssl = 1.2.28-7.43 xmlsec1-openssl(armv7l-32) = 1.2.28-7.43 [ 159s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 159s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 159s] Requires(post): /sbin/ldconfig [ 159s] Requires(postun): /sbin/ldconfig [ 159s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.1 libcrypto.so.1.1(OPENSSL_1_1_0) libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblzma.so.5 libm.so.6 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) libxmlsec1.so.1 libxslt.so.1 libz.so.1 rtld(GNU_HASH) [ 159s] Processing files: xmlsec1-devel-1.2.28-7.43.armv7l [ 159s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 159s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 159s] [ 159s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.kPoIJs [ 159s] + umask 022 [ 159s] + cd /home/abuild/rpmbuild/BUILD [ 159s] + cd xmlsec1-1.2.28 [ 159s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-devel [ 159s] + export LICENSEDIR [ 159s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-devel [ 159s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-devel [ 159s] + exit 0 [ 160s] Provides: pkgconfig(xmlsec1) = 1.2.28 pkgconfig(xmlsec1-gcrypt) = 1.2.28 pkgconfig(xmlsec1-openssl) = 1.2.28 xmlsec1-devel = 1.2.28-7.43 xmlsec1-devel(armv7l-32) = 1.2.28-7.43 [ 160s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 160s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1 libxmlsec1-openssl.so.1 libxmlsec1.so.1 pkgconfig(libxml-2.0) >= 2.8.0 pkgconfig(libxslt) >= 1.0.20 [ 160s] Processing files: xmlsec1-devel-static-1.2.28-7.43.armv7l [ 160s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 160s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 160s] [ 160s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.GSJkZp [ 160s] + umask 022 [ 160s] + cd /home/abuild/rpmbuild/BUILD [ 160s] + cd xmlsec1-1.2.28 [ 160s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-devel-static [ 160s] + export LICENSEDIR [ 160s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-devel-static [ 160s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm/usr/share/licenses/xmlsec1-devel-static [ 160s] + exit 0 [ 160s] Provides: xmlsec1-devel-static = 1.2.28-7.43 xmlsec1-devel-static(armv7l-32) = 1.2.28-7.43 [ 160s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 160s] Processing files: xmlsec1-debuginfo-1.2.28-7.43.armv7l [ 160s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 160s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 160s] [ 160s] warning: File listed twice: /usr/lib/debug/.build-id [ 160s] Provides: xmlsec1-debuginfo = 1.2.28-7.43 xmlsec1-debuginfo(armv7l-32) = 1.2.28-7.43 [ 160s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 160s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.28-7.43.armv7l [ 160s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 160s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 160s] [ 160s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.28-7.43 xmlsec1-gcrypt-debuginfo(armv7l-32) = 1.2.28-7.43 [ 160s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 160s] Processing files: xmlsec1-openssl-debuginfo-1.2.28-7.43.armv7l [ 160s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 160s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 160s] [ 160s] Provides: xmlsec1-openssl-debuginfo = 1.2.28-7.43 xmlsec1-openssl-debuginfo(armv7l-32) = 1.2.28-7.43 [ 160s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 160s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm [ 160s] warning: Could not canonicalize hostname: obsnw10 [ 160s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-7.43.src.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.28-7.43.armv7l.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.28-7.43.armv7l.rpm [ 160s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.28-7.43.armv7l.rpm [ 161s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.28-7.43.armv7l.rpm [ 161s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.28-7.43.armv7l.rpm [ 161s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.28-7.43.armv7l.rpm [ 161s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.28-7.43.armv7l.rpm [ 162s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.28-7.43.armv7l.rpm [ 162s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.28-7.43.armv7l.rpm [ 162s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.nc5Hys [ 162s] + umask 022 [ 162s] + cd /home/abuild/rpmbuild/BUILD [ 162s] + cd xmlsec1-1.2.28 [ 162s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-7.43.arm [ 162s] + exit 0 [ 162s] ... checking for files with abuild user/group [ 162s] ... creating baselibs [ 162s] ... comparing built packages with the former built [ 162s] /usr/lib/build/pkg-diff.sh [ 162s] compare /.build.oldpackages/xmlsec1-1.2.28-7.42.src.rpm /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-7.43.src.rpm [ 163s] This is not a prerelease project. Compare the project name. [ 163s] comparing rpmtags [ 163s] comparing RELEASE [ 163s] comparing PROVIDES [ 163s] comparing scripts [ 163s] comparing filelist [ 163s] comparing file checksum [ 163s] RPM meta information is identical [ 163s] compare /.build.oldpackages/xmlsec1-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-1.2.28-7.43.armv7l.rpm [ 163s] Comparing xmlsec1-1.2.28-7.42.armv7l.rpm to xmlsec1-1.2.28-7.43.armv7l.rpm [ 163s] This is not a prerelease project. Compare the project name. [ 163s] comparing rpmtags [ 163s] comparing RELEASE [ 163s] comparing PROVIDES [ 163s] comparing scripts [ 163s] comparing filelist [ 163s] comparing file checksum [ 163s] creating rename script [ 163s] RPM meta information is identical [ 163s] compare /.build.oldpackages/xmlsec1-debuginfo-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debuginfo-1.2.28-7.43.armv7l.rpm [ 163s] skipping -debuginfo package [ 163s] compare /.build.oldpackages/xmlsec1-debugsource-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-debugsource-1.2.28-7.43.armv7l.rpm [ 163s] Comparing xmlsec1-debugsource-1.2.28-7.42.armv7l.rpm to xmlsec1-debugsource-1.2.28-7.43.armv7l.rpm [ 163s] This is not a prerelease project. Compare the project name. [ 163s] comparing rpmtags [ 163s] comparing RELEASE [ 163s] comparing PROVIDES [ 163s] comparing scripts [ 163s] comparing filelist [ 163s] comparing file checksum [ 164s] creating rename script [ 164s] RPM meta information is identical [ 164s] compare /.build.oldpackages/xmlsec1-devel-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-1.2.28-7.43.armv7l.rpm [ 164s] Comparing xmlsec1-devel-1.2.28-7.42.armv7l.rpm to xmlsec1-devel-1.2.28-7.43.armv7l.rpm [ 164s] This is not a prerelease project. Compare the project name. [ 164s] comparing rpmtags [ 164s] comparing RELEASE [ 164s] comparing PROVIDES [ 164s] comparing scripts [ 164s] comparing filelist [ 164s] comparing file checksum [ 164s] creating rename script [ 164s] RPM meta information is identical [ 164s] compare /.build.oldpackages/xmlsec1-devel-static-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-devel-static-1.2.28-7.43.armv7l.rpm [ 164s] Comparing xmlsec1-devel-static-1.2.28-7.42.armv7l.rpm to xmlsec1-devel-static-1.2.28-7.43.armv7l.rpm [ 164s] This is not a prerelease project. Compare the project name. [ 164s] comparing rpmtags [ 164s] comparing RELEASE [ 164s] comparing PROVIDES [ 164s] comparing scripts [ 164s] comparing filelist [ 164s] comparing file checksum [ 164s] creating rename script [ 164s] RPM file checksum differs. [ 164s] Extracting packages [ 165s] /usr/lib/libxmlsec1_gcrypt_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-asn1.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 165s] /usr/lib/libxmlsec1_gcrypt_la-asymkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_gcrypt_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-ciphers.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-crypto.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-digests.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-evp.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-evp_signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-hmac.o: only difference was in build-id or gnu_debuglink, GOOD. [ 166s] /usr/lib/libxmlsec1_openssl_la-kw_aes.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/libxmlsec1_openssl_la-kw_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/libxmlsec1_openssl_la-kt_rsa.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/libxmlsec1_openssl_la-signatures.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/libxmlsec1_openssl_la-symkeys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/libxmlsec1_openssl_la-x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/libxmlsec1_openssl_la-x509vfy.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/app.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/base64.o: only difference was in build-id or gnu_debuglink, GOOD. [ 167s] /usr/lib/bn.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/buffer.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/c14n.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/dl.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/enveloped.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/errors.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/io.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/keyinfo.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/keys.o: only difference was in build-id or gnu_debuglink, GOOD. [ 168s] /usr/lib/keysdata.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/keysmngr.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/kw_aes_des.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/list.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/membuf.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/nodeset.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/parser.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/relationship.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/strings.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/templates.o: only difference was in build-id or gnu_debuglink, GOOD. [ 169s] /usr/lib/transforms.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] /usr/lib/x509.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] /usr/lib/xmldsig.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] /usr/lib/xmlenc.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] /usr/lib/xmlsec.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] /usr/lib/xmltree.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] /usr/lib/xpath.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] /usr/lib/xslt.o: only difference was in build-id or gnu_debuglink, GOOD. [ 170s] Package content is identical [ 170s] compare /.build.oldpackages/xmlsec1-gcrypt-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-1.2.28-7.43.armv7l.rpm [ 170s] Comparing xmlsec1-gcrypt-1.2.28-7.42.armv7l.rpm to xmlsec1-gcrypt-1.2.28-7.43.armv7l.rpm [ 170s] This is not a prerelease project. Compare the project name. [ 170s] comparing rpmtags [ 171s] comparing RELEASE [ 171s] comparing PROVIDES [ 171s] comparing scripts [ 171s] comparing filelist [ 171s] comparing file checksum [ 171s] creating rename script [ 171s] RPM meta information is identical [ 171s] compare /.build.oldpackages/xmlsec1-gcrypt-debuginfo-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-gcrypt-debuginfo-1.2.28-7.43.armv7l.rpm [ 171s] skipping -debuginfo package [ 171s] compare /.build.oldpackages/xmlsec1-openssl-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-1.2.28-7.43.armv7l.rpm [ 171s] Comparing xmlsec1-openssl-1.2.28-7.42.armv7l.rpm to xmlsec1-openssl-1.2.28-7.43.armv7l.rpm [ 171s] This is not a prerelease project. Compare the project name. [ 171s] comparing rpmtags [ 171s] comparing RELEASE [ 171s] comparing PROVIDES [ 171s] comparing scripts [ 171s] comparing filelist [ 171s] comparing file checksum [ 171s] creating rename script [ 171s] RPM meta information is identical [ 171s] compare /.build.oldpackages/xmlsec1-openssl-debuginfo-1.2.28-7.42.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xmlsec1-openssl-debuginfo-1.2.28-7.43.armv7l.rpm [ 171s] skipping -debuginfo package [ 171s] compare validated built as identical ! [ 171s] [ 171s] obsnw10 finished "build xmlsec1.spec" at Mon Sep 28 07:06:52 UTC 2020. [ 171s] Retried build at Tue Oct 6 05:50:40 2020 returned same result, skipped