[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw03 started "build _service:gbs:hal-backend-device-tw3.spec" at Wed Aug 4 09:04:13 UTC 2021. [ 0s] [ 0s] Building hal-backend-device-tw3 for project 'Tizen:Unified' repository 'standard' arch 'aarch64' srcmd5 'b6c56e2bcfbe2620f26d2e3a72897a88' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-tw3.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-tw3.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-tw3.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling bash... [ 2s] [7/41] preinstalling diffutils... [ 2s] [8/41] preinstalling grep... [ 2s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libcap... [ 2s] [13/41] preinstalling libfreebl3... [ 2s] [14/41] preinstalling libgcc... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 11s] [28/41] preinstalling coreutils... [ 11s] [29/41] preinstalling libacl... [ 11s] [30/41] preinstalling libelf... [ 11s] [31/41] preinstalling libmount... [ 11s] [32/41] preinstalling smack... [ 11s] [33/41] preinstalling bzip2... [ 11s] [34/41] preinstalling libmagic... [ 11s] [35/41] preinstalling libxml2... [ 11s] [36/41] preinstalling tar... [ 11s] [37/41] preinstalling util-linux... [ 11s] [38/41] preinstalling util-linux-su... [ 11s] [39/41] preinstalling nss... [ 11s] [40/41] preinstalling libsoftokn3... [ 11s] [41/41] preinstalling rpm... [ 11s] [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-aarch64 postinstall script [ 12s] running setup postinstall script [ 12s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 12s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 12s] initializing rpm db... [ 12s] reordering...cycle: gio-branding-upstream -> libgio [ 12s] breaking dependency libgio -> gio-branding-upstream [ 12s] cycle: libsoftokn3 -> nss [ 12s] breaking dependency nss -> libsoftokn3 [ 12s] done [ 12s] [1/149] installing dlog-config-persistent-logs-6.5.8-116.19 [ 12s] [2/149] installing libmagic-data-5.39-4.162 [ 13s] [3/149] installing setup-0.9-4.40 [ 13s] [4/149] installing filesystem-3.1-4.1 [ 13s] [5/149] installing glibc-2.30-11.1 [ 13s] [6/149] installing bash-3.2.57-4.5 [ 14s] [7/149] installing capi-base-common-0.4.63-47.1 [ 14s] [8/149] installing cpio-2.8-5.3 [ 14s] [9/149] installing diffutils-3.3-4.3 [ 14s] [10/149] installing findutils-4.3.8-4.73 [ 14s] [11/149] installing gdbm-1.8.3-3.270 [ 14s] [12/149] installing hostname-3.23-3.3 [ 15s] [13/149] installing iniparser-4.1-3.7 [ 15s] [14/149] installing libatomic-9.2.0-12.9 [ 15s] [15/149] installing libattr-2.4.48-4.189 [ 16s] [16/149] installing libblkid-2.36-7.35 [ 17s] [17/149] installing libbz2-1.0.8-4.206 [ 17s] [18/149] installing libcap-2.24-3.248 [ 17s] [19/149] installing libexpat-2.2.9-3.146 [ 18s] [20/149] installing libext2fs-1.46.0-4.21 [ 18s] [21/149] installing libffi-3.3-4.192 [ 19s] [22/149] installing libfreebl3-3.34.1-3.201 [ 19s] [23/149] installing libgcc-9.2.0-12.9 [ 19s] [24/149] installing libgomp-9.2.0-12.9 [ 20s] [25/149] installing libitm-9.2.0-12.9 [ 20s] [26/149] installing libjson-0.15-12.5 [ 20s] [27/149] installing libltdl-2.4.2-3.213 [ 21s] [28/149] installing liblua-5.1.5-3.162 [ 21s] [29/149] installing liblzma-5.2.5-4.115 [ 22s] [30/149] installing libopenssl11-1.1.1k-5.46 [ 22s] [31/149] installing libpcre-8.44-4.32 [ 22s] [32/149] installing libpopt-1.16-3.246 [ 23s] [33/149] installing libpython3_9m1_0-3.9.1-9.2 [ 23s] [34/149] installing libsmack-1.3.1-3.240 [ 24s] [35/149] installing libsmartcols-2.36-7.35 [ 24s] [36/149] installing libsqlite-3.33.0-4.170 [ 25s] [37/149] installing libuuid-2.36-7.35 [ 25s] [38/149] installing libzstd1-1.4.5-1.142 [ 26s] [39/149] installing m4-1.4.17-3.3 [ 26s] [40/149] installing net-tools-2.0_20121208git-4.4 [ 26s] [41/149] installing nspr-4.12-3.247 [ 28s] [42/149] installing patch-2.7-6.70 [ 28s] [43/149] installing pkg-config-0.28-3.241 [ 28s] [44/149] installing sed-4.1c-4.2 [ 28s] [45/149] installing update-alternatives-1.20.5-3.4 [ 28s] [46/149] installing which-2.17-4.4 [ 28s] [47/149] installing zlib-1.2.11-3.255 [ 28s] [48/149] installing shadow-utils-4.1.4.2-1.78 [ 29s] [49/149] installing build-compare-2015.04.28-3.100 [ 29s] [50/149] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 30s] [51/149] installing terminfo-base-full-6.2-6.22 [ 31s] [52/149] installing capi-base-common-devel-0.4.63-47.1 [ 31s] [53/149] installing coreutils-6.9-5.29 [ 31s] [54/149] installing cpp-9.2.0-12.9 [ 32s] [55/149] installing gawk-3.1.5-4.4 [ 32s] [56/149] installing gcc-c++-9.2.0-12.9 [ 33s] [57/149] installing grep-2.5.2-3.4 [ 33s] [58/149] installing libacl-2.2.53-4.189 [ 34s] [59/149] installing libblkid-devel-2.36-7.35 [ 34s] [60/149] installing libcap-tools-2.24-3.248 [ 34s] [61/149] installing libelf-0.178-3.144 [ 34s] [62/149] installing libffi-devel-3.3-4.192 [ 34s] [63/149] installing libgfortran-9.2.0-12.9 [ 35s] [64/149] installing libglib-2.62.3-30.44 [ 35s] [65/149] installing libmount-2.36-7.35 [ 35s] [66/149] installing libpcreposix-8.44-4.32 [ 36s] [67/149] installing libstdc++-9.2.0-12.9 [ 36s] [68/149] installing make-4.0-2.73 [ 37s] [69/149] installing nss-certs-3.34.1-3.201 [ 37s] [70/149] installing smack-1.3.1-3.240 [ 37s] [71/149] installing bzip2-1.0.8-4.206 [ 37s] [72/149] installing libfdisk-2.36-7.35 [ 37s] [73/149] installing libmagic-5.39-4.162 [ 37s] [74/149] installing libxml2-2.9.12-7.4 [ 38s] [75/149] installing perl-5.32.0-4.94 [ 41s] [76/149] installing xz-5.2.5-4.115 [ 41s] [77/149] installing libkmod-28-12.1 [ 41s] [78/149] installing build-mkbaselibs-20120927-3.3 [ 41s] [79/149] installing libstdc++-devel-9.2.0-12.9 [ 42s] [80/149] installing acl-2.2.53-4.189 [ 42s] [81/149] installing file-5.39-4.162 [ 42s] [82/149] installing libgmodule-2.62.3-30.44 [ 43s] [83/149] installing libgthread-2.62.3-30.44 [ 43s] [84/149] installing linux-glibc-devel-3.10-4.96 [ 44s] [85/149] installing tar-1.17-3.2 [ 44s] [86/149] installing autoconf-2.69-3.159 [ 44s] [87/149] installing binutils-2.33.1-9.22 [ 45s] [88/149] installing glibc-locale-2.30-11.1 [ 46s] [89/149] installing gzip-1.3.12-3.247 [ 46s] [90/149] installing libcc1-9.2.0-12.9 [ 46s] [91/149] installing libconfig-1.6-4.9 [ 46s] [92/149] installing libgobject-2.62.3-30.44 [ 47s] [93/149] installing libmount-devel-2.36-7.35 [ 47s] [94/149] installing libubsan-9.2.0-12.9 [ 47s] [95/149] installing pam-1.1.6-3.4 [ 48s] [96/149] installing libncurses6-6.2-6.22 [ 48s] [97/149] installing libpcrecpp-8.44-4.32 [ 49s] [98/149] installing tzdata-2020a-3.3 [ 49s] [99/149] installing dlog-6.5.8-116.19 [ 50s] [100/149] installing libdw-0.178-3.144 [ 50s] [101/149] installing security-config-1.0-146.1 [ 59s] groupadd: group 'dbus' already exists [ 59s] groupadd: group 'priv_appdebugging' already exists [ 59s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 59s] [102/149] installing libarchive-3.5.1-2.41 [ 59s] [103/149] installing shared-mime-info-1.7-5.22 [ 67s] [104/149] installing libncurses-6.2-6.22 [ 67s] [105/149] installing dlog-logger-6.5.8-116.19 [ 67s] [106/149] installing glibc-devel-2.30-11.1 [ 67s] [107/149] installing less-466-3.4 [ 67s] [108/149] installing libconfig-devel-1.6-4.9 [ 69s] [109/149] installing libreadline-5.2-3.72 [ 70s] [110/149] installing libusbgx-0.1.0-3.8 [ 71s] [111/149] installing procps-ng-3.3.16-3.4 [ 71s] [112/149] installing automake-1.15.1-3.174 [ 72s] [113/149] installing libasm-0.178-3.144 [ 72s] [114/149] installing build-20120927-3.3 [ 72s] [115/149] installing libsystemd-244-87.1 [ 72s] [116/149] installing pcre-devel-8.44-4.32 [ 72s] [117/149] installing gcc-9.2.0-12.9 [ 74s] [118/149] installing qemu-accel-x86_64-aarch64-0.4-8.11 [ 84s] [119/149] installing libusbgx-devel-0.1.0-3.8 [ 84s] [120/149] installing zlib-devel-1.2.11-3.255 [ 84s] [121/149] installing libtool-2.4.2-3.213 [ 84s] [122/149] installing elfutils-0.178-3.144 [ 84s] [123/149] installing libdlog-6.5.8-116.19 [ 85s] [124/149] installing python3-base-3.9.1-9.2 [ 86s] [125/149] installing util-linux-2.36-7.35 [ 86s] [126/149] installing python3-3.9.1-9.2 [ 86s] [127/149] installing libdlog-devel-6.5.8-116.19 [ 86s] [128/149] installing util-linux-su-2.36-7.35 [ 86s] [129/149] installing capi-system-info-0.5.2-26.1 [ 87s] Running capi-system-info %posttrans script [ 87s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 87s] iniparser: cannot open /etc/info.ini [ 87s] [130/149] installing cmake-3.16.4-4.2 [ 88s] [131/149] installing systemd-244-87.1 [ 91s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 91s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 91s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 91s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 91s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 91s] [132/149] installing capi-system-info-devel-0.5.2-26.1 [ 91s] [133/149] installing systemd-devel-244-87.1 [ 91s] [134/149] installing nss-3.34.1-3.201 [ 91s] [135/149] installing libgio-2.62.3-30.44 [ 92s] [136/149] installing gio-branding-upstream-2.62.3-30.44 [ 92s] [137/149] installing libsoftokn3-3.34.1-3.201 [ 92s] [138/149] installing glib2-tools-2.62.3-30.44 [ 92s] [139/149] installing libsyscommon-4.1-41.1 [ 93s] [140/149] installing hal-api-common-0.0.1-25.1 [ 93s] /opt/etc/hal: No such file or directory [ 93s] /opt/etc/hal: No such file or directory [ 93s] [141/149] installing rpm-4.14.1.1-8.30 [ 94s] [142/149] installing hal-api-common-devel-0.0.1-25.1 [ 94s] [143/149] installing hal-api-device-1.0.0-10.1 [ 94s] [144/149] installing hal-backend-device-common-1-6.2 [ 94s] [145/149] installing glib2-devel-2.62.3-30.44 [ 94s] [146/149] installing rpm-build-4.14.1.1-8.30 [ 94s] [147/149] installing hal-api-device-devel-1.0.0-10.1 [ 95s] [148/149] installing hal-backend-device-common-devel-1-6.2 [ 95s] [149/149] installing libsyscommon-devel-4.1-41.1 [ 95s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 95s] now finalizing build dir... [ 95s] Running build time source services... [ 96s] build target is aarch64-tizen-linux [ 96s] ----------------------------------------------------------------- [ 96s] I have the following modifications for hal-backend-device-tw3.spec: [ 96s] 5c5 [ 96s] < Release: 0 [ 96s] --- [ 96s] > Release: 2.1 [ 96s] ----------------------------------------------------------------- [ 96s] ----- building hal-backend-device-tw3.spec (user abuild) [ 96s] ----------------------------------------------------------------- [ 96s] ----------------------------------------------------------------- [ 96s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/b6c56e2bcfbe2620f26d2e3a72897a88-hal-backend-device-tw3' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-tw3.spec [ 96s] Building target platforms: aarch64-tizen-linux [ 96s] Building for target aarch64-tizen-linux [ 96s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bmlL8v [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + rm -rf hal-backend-device-tw3-0.0.1 [ 96s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-tw3-0.0.1.tar.gz [ 96s] + /bin/tar -xof - [ 96s] + STATUS=0 [ 96s] + '[' 0 -ne 0 ']' [ 96s] + cd hal-backend-device-tw3-0.0.1 [ 96s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 96s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-tw3.manifest . [ 96s] + exit 0 [ 96s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0NlAzu [ 96s] + umask 022 [ 96s] + cd /home/abuild/rpmbuild/BUILD [ 96s] + cd hal-backend-device-tw3-0.0.1 [ 96s] ++ uname -m [ 96s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 96s] + ref=/usr/lib/rpm [ 96s] + for s in guess sub [ 96s] ++ find -maxdepth 8 -name config.guess [ 96s] + for s in guess sub [ 96s] ++ find -maxdepth 8 -name config.sub [ 96s] + LANG=C [ 96s] + export LANG [ 96s] + unset DISPLAY [ 96s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 96s] + export CFLAGS [ 96s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 96s] + export CXXFLAGS [ 96s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 96s] + export FFLAGS [ 96s] + LDFLAGS= [ 96s] + export LDFLAGS [ 96s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 96s] + export CFLAGS [ 96s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 96s] + export CXXFLAGS [ 96s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 96s] + export FFLAGS [ 96s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DENABLE_DLOG=on -DHAL_LIB_DIR=/hal/lib64 -DHAL_LICENSE_DIR=/hal/share/licenses [ 96s] -- The C compiler identification is GNU 9.2.0 [ 96s] -- Check for working C compiler: /bin/cc [ 96s] -- Check for working C compiler: /bin/cc -- works [ 96s] -- Detecting C compiler ABI info [ 96s] -- Detecting C compiler ABI info - done [ 96s] -- Detecting C compile features [ 96s] -- Detecting C compile features - done [ 96s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 96s] -- Checking for modules 'glib-2.0;hal-backend-device-common;libsyscommon' [ 97s] -- Found glib-2.0, version 2.62.3 [ 97s] -- Found hal-backend-device-common, version 1.1 [ 97s] -- Found libsyscommon, version 4.1 [ 98s] -- Checking for modules 'capi-system-info;hal-backend-device-common;libsyscommon' [ 98s] -- Found capi-system-info, version 0.2.0 [ 98s] -- Found hal-backend-device-common, version 1.1 [ 99s] -- Found libsyscommon, version 4.1 [ 99s] -- Checking for modules 'glib-2.0;hal-backend-device-common' [ 100s] -- Found glib-2.0, version 2.62.3 [ 100s] -- Found hal-backend-device-common, version 1.1 [ 101s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 101s] -- Found hal-backend-device-common, version 1.1 [ 101s] -- Found libsyscommon, version 4.1 [ 102s] -- Checking for module 'hal-backend-device-common' [ 102s] -- Found hal-backend-device-common, version 1.1 [ 103s] -- Checking for modules 'glib-2.0;hal-backend-device-common' [ 103s] -- Found glib-2.0, version 2.62.3 [ 103s] -- Found hal-backend-device-common, version 1.1 [ 104s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 104s] -- Found hal-backend-device-common, version 1.1 [ 104s] -- Found libsyscommon, version 4.1 [ 105s] -- Checking for modules 'glib-2.0;libsyscommon;hal-backend-device-common' [ 105s] -- Found glib-2.0, version 2.62.3 [ 105s] -- Found libsyscommon, version 4.1 [ 106s] -- Found hal-backend-device-common, version 1.1 [ 106s] -- Checking for module 'dlog' [ 106s] -- Found dlog, version 1.0 [ 107s] -- Configuring done [ 107s] -- Generating done [ 107s] CMake Warning: [ 107s] Manually-specified variables were not used by the project: [ 107s] [ 107s] CMAKE_INSTALL_LIBDIR [ 107s] INCLUDE_INSTALL_DIR [ 107s] LIB_INSTALL_DIR [ 107s] LIB_SUFFIX [ 107s] SHARE_INSTALL_PREFIX [ 107s] SYSCONF_INSTALL_DIR [ 107s] [ 107s] [ 107s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 [ 107s] + make -j8 [ 107s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 107s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/CMakeFiles/progress.marks [ 107s] make -f CMakeFiles/Makefile2 all [ 107s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make -f hw/battery/CMakeFiles/hal-backend-device-battery.dir/build.make hw/battery/CMakeFiles/hal-backend-device-battery.dir/depend [ 107s] make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/depend [ 107s] make -f hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/build.make hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/depend [ 107s] make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/depend [ 107s] make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/depend [ 107s] make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/depend [ 107s] make -f hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/build.make hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/depend [ 107s] make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/depend [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery/CMakeFiles/hal-backend-device-battery.dir/DependInfo.cmake --color= [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/DependInfo.cmake --color= [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/DependInfo.cmake --color= [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display/CMakeFiles/hal-backend-device-display.dir/DependInfo.cmake --color= [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/DependInfo.cmake --color= [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/DependInfo.cmake --color= [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/DependInfo.cmake --color= [ 107s] Scanning dependencies of target hal-backend-device-thermal [ 107s] Scanning dependencies of target hal-backend-device-display [ 107s] Scanning dependencies of target hal-backend-device-battery [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build [ 107s] Scanning dependencies of target hal-backend-device-usb-gadget [ 107s] make -f hw/battery/CMakeFiles/hal-backend-device-battery.dir/build.make hw/battery/CMakeFiles/hal-backend-device-battery.dir/build [ 107s] make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/build [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build [ 107s] Scanning dependencies of target hal-backend-device-haptic [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/DependInfo.cmake --color= [ 107s] Scanning dependencies of target hal-backend-device-bezel [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make -f hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/build.make hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/build [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 5%] Building C object hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o [ 107s] [ 11%] Building C object hw/battery/CMakeFiles/hal-backend-device-battery.dir/battery.c.o [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_thermal_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal/thermal.c [ 107s] Scanning dependencies of target hal-backend-device-touchscreen [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 16%] Building C object hw/display/CMakeFiles/hal-backend-device-display.dir/display.c.o [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_battery_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-battery.dir/battery.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery/battery.c [ 107s] make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_display_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/system -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-display.dir/display.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display/display.c [ 107s] [ 22%] Building C object hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/bezel.c.o [ 107s] [ 27%] Building C object hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/standard.c.o [ 107s] [ 33%] Building C object hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_bezel_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-bezel.dir/bezel.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel/bezel.c [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_usb_gadget_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget/usb_gadget.c [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_haptic_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-haptic.dir/standard.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic/standard.c [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] Scanning dependencies of target hal-backend-device-external-connection [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make -f hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/build.make hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/build [ 107s] [ 38%] Building C object hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_touchscreen_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen/touchscreen.c [ 107s] [ 44%] Building C object hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/external_connection.c.o [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_external_connection_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-external-connection.dir/external_connection.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection/external_connection.c [ 107s] [ 50%] Linking C shared module libhal-backend-device-usb-gadget.so [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-usb-gadget.dir/link.txt --verbose=1 [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-usb-gadget.so CMakeFiles/hal-backend-device-usb-gadget.dir/usb_gadget.c.o -L/hal/lib64 -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev [ 107s] [ 55%] Linking C shared module libhal-backend-device-bezel.so [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-bezel.dir/link.txt --verbose=1 [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -shared -o libhal-backend-device-bezel.so CMakeFiles/hal-backend-device-bezel.dir/bezel.c.o -L/hal/lib64 -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ludev -lsyscommon -lgio-2.0 -lgobject-2.0 -lglib-2.0 [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 55%] Built target hal-backend-device-usb-gadget [ 107s] make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/depend [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory/CMakeFiles/hal-backend-device-memory.dir/DependInfo.cmake --color= [ 107s] Scanning dependencies of target hal-backend-device-memory [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/build [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 61%] Building C object hw/memory/CMakeFiles/hal-backend-device-memory.dir/memory.c.o [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory && /bin/cc -DFEATURE_DLOG -Dhal_backend_device_memory_EXPORTS -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-memory.dir/memory.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory/memory.c [ 107s] [ 72%] Linking C shared module libhal-backend-device-touchscreen.so [ 107s] [ 72%] Linking C shared module libhal-backend-device-external-connection.so [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-touchscreen.dir/link.txt --verbose=1 [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-external-connection.dir/link.txt --verbose=1 [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -shared -o libhal-backend-device-touchscreen.so CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o -L/hal/lib64 -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ludev -lsyscommon -lgio-2.0 -lgobject-2.0 -lglib-2.0 [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-external-connection.so CMakeFiles/hal-backend-device-external-connection.dir/external_connection.c.o -L/hal/lib64 -lglib-2.0 -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 77%] Linking C shared module libhal-backend-device-thermal.so [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-thermal.dir/link.txt --verbose=1 [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-thermal.so CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o -L/hal/lib64 -lglib-2.0 -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev [ 107s] [ 83%] Linking C shared module libhal-backend-device-display.so [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-display.dir/link.txt --verbose=1 [ 107s] [ 83%] Built target hal-backend-device-bezel [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/system -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -shared -o libhal-backend-device-display.so CMakeFiles/hal-backend-device-display.dir/display.c.o -L/hal/lib64 -lcapi-system-info -lcapi-base-common -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ludev -lsyscommon -lgio-2.0 -lgobject-2.0 -lglib-2.0 [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 88%] Linking C shared module libhal-backend-device-battery.so [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-battery.dir/link.txt --verbose=1 [ 107s] [ 88%] Built target hal-backend-device-external-connection [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fvisibility=hidden -shared -o libhal-backend-device-battery.so CMakeFiles/hal-backend-device-battery.dir/battery.c.o -L/hal/lib64 -lglib-2.0 -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lhal-backend-device-common -ldlog -ludev -lsyscommon -lgio-2.0 -lgobject-2.0 [ 107s] [ 88%] Built target hal-backend-device-touchscreen [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 88%] Built target hal-backend-device-thermal [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 88%] Built target hal-backend-device-display [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 107s] [ 88%] Built target hal-backend-device-battery [ 107s] [ 94%] Linking C shared module libhal-backend-device-memory.so [ 107s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-memory.dir/link.txt --verbose=1 [ 107s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-memory.so CMakeFiles/hal-backend-device-memory.dir/memory.c.o -ldlog [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 94%] Built target hal-backend-device-memory [ 108s] [100%] Linking C shared module libhal-backend-device-haptic.so [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic && /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-haptic.dir/link.txt --verbose=1 [ 108s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -Werror -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -shared -o libhal-backend-device-haptic.so CMakeFiles/hal-backend-device-haptic.dir/standard.c.o -L/hal/lib64 -lglib-2.0 -lsyscommon -ldlog -lgio-2.0 -lgobject-2.0 -lglib-2.0 -Wl,-rpath,/hal/lib64 -lhal-backend-device-common -ldlog -ludev -lglib-2.0 -lsyscommon -lgio-2.0 -lgobject-2.0 -lhal-backend-device-common -ludev [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [100%] Built target hal-backend-device-haptic [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/CMakeFiles 0 [ 108s] + exit 0 [ 108s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ywlTuu [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + cd hal-backend-device-tw3-0.0.1 [ 108s] + LANG=C [ 108s] + export LANG [ 108s] + unset DISPLAY [ 108s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 [ 108s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 [ 108s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 install [ 108s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 108s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/CMakeFiles/progress.marks [ 108s] /bin/make -f CMakeFiles/Makefile2 all [ 108s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/battery/CMakeFiles/hal-backend-device-battery.dir/build.make hw/battery/CMakeFiles/hal-backend-device-battery.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/battery/CMakeFiles/hal-backend-device-battery.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/battery/CMakeFiles/hal-backend-device-battery.dir/build.make hw/battery/CMakeFiles/hal-backend-device-battery.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/battery/CMakeFiles/hal-backend-device-battery.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 11%] Built target hal-backend-device-battery [ 108s] /bin/make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/display/CMakeFiles/hal-backend-device-display.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/display/CMakeFiles/hal-backend-device-display.dir/build.make hw/display/CMakeFiles/hal-backend-device-display.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/display/CMakeFiles/hal-backend-device-display.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 22%] Built target hal-backend-device-display [ 108s] /bin/make -f hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/build.make hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/build.make hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 33%] Built target hal-backend-device-external-connection [ 108s] /bin/make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build.make hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 44%] Built target hal-backend-device-touchscreen [ 108s] /bin/make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build.make hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/usb_gadget/CMakeFiles/hal-backend-device-usb-gadget.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 55%] Built target hal-backend-device-usb-gadget [ 108s] /bin/make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build.make hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 66%] Built target hal-backend-device-thermal [ 108s] /bin/make -f hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/build.make hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/build.make hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/bezel/CMakeFiles/hal-backend-device-bezel.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 77%] Built target hal-backend-device-bezel [ 108s] /bin/make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build.make hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [ 88%] Built target hal-backend-device-haptic [ 108s] /bin/make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/depend [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hw/memory/CMakeFiles/hal-backend-device-memory.dir/DependInfo.cmake --color= [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /bin/make -f hw/memory/CMakeFiles/hal-backend-device-memory.dir/build.make hw/memory/CMakeFiles/hal-backend-device-memory.dir/build [ 108s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[2]: Nothing to be done for 'hw/memory/CMakeFiles/hal-backend-device-memory.dir/build'. [ 108s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] [100%] Built target hal-backend-device-memory [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/CMakeFiles 0 [ 108s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 108s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] make[1]: Nothing to be done for 'preinstall'. [ 108s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1' [ 108s] Install the project... [ 108s] /usr/bin/cmake -P cmake_install.cmake [ 108s] -- Install configuration: "" [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/share/licenses/hal-backend-device-tw3/LICENSE.Apache-2.0 [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-battery.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-display.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-external-connection.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-touchscreen.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-usb-gadget.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-thermal.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-bezel.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-haptic.so [ 108s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-memory.so [ 108s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/usr/share/info/dir [ 108s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 -regex '.*\.la$' [ 108s] + xargs rm -f -- [ 108s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 -regex '.*\.a$' [ 108s] + xargs rm -f -- [ 108s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 0.0.1-2.1 --unique-debug-src-base hal-backend-device-tw3-0.0.1-2.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1 [ 109s] 1+0 records in [ 109s] 1+0 records out [ 109s] 7 bytes (7 B) copied, 0.000866121 s, 8.1 kB/s [ 109s] 1+0 records in [ 109s] 1+0 records out [ 109s] 1+0 records in [ 109s] 1+0 records out [ 109s] 7 bytes (7 B) copied1+0 records in [ 109s] 1+0 records out [ 109s] 7 bytes (7 B) copied1+0 records in [ 109s] 1+0 records out [ 109s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.0005778 s, 12.1 kB/s [ 109s] , 0.000871906 s, 8.0 kB/s [ 109s] , 0.000942405 s, 7.4 kB/s [ 109s] , 0.000904631 s, 7.7 kB/s [ 109s] 1+0 records in [ 109s] 1+0 records out [ 109s] 7 bytes (7 B) copied, 0.000914299 s, 7.7 kB/s [ 109s] 1+0 records in [ 109s] 1+0 records out [ 109s] 7 bytes (7 B) copied, 0.000864238 s, 8.1 kB/s [ 109s] 1+0 records in [ 109s] 1+0 records out [ 109s] 7 bytes (7 B) copied, 0.000782482 s, 8.9 kB/s [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-battery.so [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-haptic.so [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-bezel.so [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-external-connection.so [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-display.so [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-memory.so [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-thermal.so [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-touchscreen.so [ 109s] 1+0 records in [ 109s] 1+0 records out [ 109s] 0+0 records in [ 109s] 0+0 records out [ 109s] 7 bytes (7 B) copied0 bytes (0 B) copied, 0.000390447 s, 0.0 kB/s [ 109s] , 0.000819881 s, 8.5 kB/s [ 109s] 0+0 records in [ 109s] 0+0 records out [ 109s] 0 bytes (0 B) copied0+0 records in [ 109s] 0+0 records out [ 109s] 0 bytes (0 B) copied, 0.000653509 s, 0.0 kB/s [ 109s] , 0.000602726 s, 0.0 kB/s [ 109s] 0+0 records in [ 109s] 0+0 records out [ 109s] 0 bytes (0 B) copied, 0.000626315 s, 0.0 kB/s [ 109s] 0+0 records in [ 109s] 0+0 records out [ 109s] 0 bytes (0 B) copied, 0.000627141 s, 0.0 kB/s [ 109s] 0+0 records in [ 109s] 0+0 records out [ 109s] 0+0 records in [ 109s] 0+0 records out [ 109s] 0 bytes (0 B) copied0 bytes (0 B) copied, 0.000632968 s, 0.0 kB/s [ 109s] , 0.00058669 s, 0.0 kB/s [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64/hal/lib64/libhal-backend-device-usb-gadget.so [ 109s] 0+0 records in [ 109s] 0+0 records out [ 109s] 0 bytes (0 B) copied, 0.000627643 s, 0.0 kB/s [ 109s] 93 blocks [ 109s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hal-backend-device-tw3-debuginfo.manifest [ 109s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tw3-0.0.1/hal-backend-device-tw3-debugsource.manifest [ 109s] + /usr/lib/rpm/check-buildroot [ 109s] + /usr/lib/rpm//brp-compress [ 109s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 109s] + /usr/lib/rpm/brp-python-hardlink [ 109s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 [ 109s] Processing files: hal-backend-device-tw3-0.0.1-2.1.aarch64 [ 109s] Aptk: PG1hbmlmZXN0Pg0KCTxyZXF1ZXN0Pg0KCQk8ZG9tYWluIG5hbWU9Il8iIC8+DQoJ [ 109s] PC9yZXF1ZXN0Pg0KPC9tYW5pZmVzdD4NCg== [ 109s] [ 109s] Provides: hal-backend-device-tw3 = 0.0.1-2.1 hal-backend-device-tw3(aarch-64) = 0.0.1-2.1 libhal-backend-device-battery.so()(64bit) libhal-backend-device-bezel.so()(64bit) libhal-backend-device-display.so()(64bit) libhal-backend-device-external-connection.so()(64bit) libhal-backend-device-haptic.so()(64bit) libhal-backend-device-memory.so()(64bit) libhal-backend-device-thermal.so()(64bit) libhal-backend-device-touchscreen.so()(64bit) libhal-backend-device-usb-gadget.so()(64bit) [ 109s] Requires(interp): /bin/sh /bin/sh [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Requires(post): /bin/sh /sbin/ldconfig [ 109s] Requires(postun): /bin/sh /sbin/ldconfig [ 109s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcapi-system-info.so.0()(64bit) libdlog.so.0()(64bit) libglib-2.0.so.0()(64bit) libhal-backend-device-common.so()(64bit) libsyscommon.so.4.1()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) [ 109s] Processing files: hal-backend-device-tw3-debugsource-0.0.1-2.1.aarch64 [ 109s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 109s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 109s] [ 109s] Provides: hal-backend-device-tw3-debugsource = 0.0.1-2.1 hal-backend-device-tw3-debugsource(aarch-64) = 0.0.1-2.1 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Processing files: hal-backend-device-tw3-debuginfo-0.0.1-2.1.aarch64 [ 109s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 109s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 109s] [ 109s] Provides: hal-backend-device-tw3-debuginfo = 0.0.1-2.1 hal-backend-device-tw3-debuginfo(aarch-64) = 0.0.1-2.1 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Recommends: hal-backend-device-tw3-debugsource(aarch-64) = 0.0.1-2.1 [ 109s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 [ 110s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-tw3-0.0.1-2.1.src.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tw3-0.0.1-2.1.aarch64.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tw3-debugsource-0.0.1-2.1.aarch64.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tw3-debuginfo-0.0.1-2.1.aarch64.rpm [ 110s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.zB41Uv [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd hal-backend-device-tw3-0.0.1 [ 110s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tw3-0.0.1-2.1.aarch64 [ 110s] + exit 0 [ 110s] ... checking for files with abuild user/group [ 110s] ... creating baselibs [ 111s] ... comparing built packages with the former built [ 111s] /usr/lib/build/pkg-diff.sh [ 111s] compare /.build.oldpackages/hal-backend-device-tw3-0.0.1-1.3.src.rpm /home/abuild/rpmbuild/SRPMS/hal-backend-device-tw3-0.0.1-2.1.src.rpm [ 111s] This is not a prerelease project. Compare the project name. [ 111s] comparing rpmtags [ 111s] comparing RELEASE [ 111s] comparing PROVIDES [ 111s] comparing scripts [ 111s] comparing filelist [ 111s] comparing file checksum [ 111s] RPM meta information is identical [ 111s] compare /.build.oldpackages/hal-backend-device-tw3-0.0.1-1.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tw3-0.0.1-2.1.aarch64.rpm [ 111s] Comparing hal-backend-device-tw3-0.0.1-1.3.aarch64.rpm to hal-backend-device-tw3-0.0.1-2.1.aarch64.rpm [ 112s] This is not a prerelease project. Compare the project name. [ 112s] comparing rpmtags [ 112s] --- /tmp/tmp.MOst119311/tmp.NaxV119329 2021-08-04 09:06:05.041171928 +0000 [ 112s] +++ /tmp/tmp.MOst119311/tmp.dbGP119331 2021-08-04 09:06:05.049171858 +0000 [ 112s] @@ -8,4 +8,4 @@ [ 112s] cpio xz 5T [ 112s] [ 112s] (none) (none) (none) [ 112s] -obs://build.tizen.org/Tizen:Unified/standard/85cd126080bf97969b8258b890318415-hal-backend-device-tw3 Tizen:Unified [ 112s] +obs://build.tizen.org/Tizen:Unified/standard/b6c56e2bcfbe2620f26d2e3a72897a88-hal-backend-device-tw3 Tizen:Unified [ 112s] RPM meta information is different [ 112s] compare /.build.oldpackages/hal-backend-device-tw3-debuginfo-0.0.1-1.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tw3-debuginfo-0.0.1-2.1.aarch64.rpm [ 112s] skipping -debuginfo package [ 112s] compare /.build.oldpackages/hal-backend-device-tw3-debugsource-0.0.1-1.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tw3-debugsource-0.0.1-2.1.aarch64.rpm [ 112s] Comparing hal-backend-device-tw3-debugsource-0.0.1-1.3.aarch64.rpm to hal-backend-device-tw3-debugsource-0.0.1-2.1.aarch64.rpm [ 112s] This is not a prerelease project. Compare the project name. [ 112s] comparing rpmtags [ 112s] --- /tmp/tmp.aOCO119351/tmp.OiIC119369 2021-08-04 09:06:05.329169419 +0000 [ 112s] +++ /tmp/tmp.aOCO119351/tmp.rlhZ119371 2021-08-04 09:06:05.333169384 +0000 [ 112s] @@ -10,4 +10,4 @@ [ 112s] cpio xz 5T [ 112s] [ 112s] (none) (none) (none) [ 112s] -obs://build.tizen.org/Tizen:Unified/standard/85cd126080bf97969b8258b890318415-hal-backend-device-tw3 Tizen:Unified [ 112s] +obs://build.tizen.org/Tizen:Unified/standard/b6c56e2bcfbe2620f26d2e3a72897a88-hal-backend-device-tw3 Tizen:Unified [ 112s] RPM meta information is different [ 112s] [ 112s] obspw03 finished "build hal-backend-device-tw3.spec" at Wed Aug 4 09:06:05 UTC 2021. [ 112s] Retried build at Tue Aug 10 14:12:10 2021 returned same result, skipped Retried build at Tue Aug 17 12:46:50 2021 returned same result, skipped Retried build at Wed Aug 18 12:54:10 2021 returned same result, skipped Retried build at Fri Aug 20 10:25:16 2021 returned same result, skipped Retried build at Mon Aug 23 07:22:33 2021 returned same result, skipped Retried build at Tue Aug 24 01:53:57 2021 returned same result, skipped Retried build at Wed Aug 25 06:07:56 2021 returned same result, skipped Retried build at Fri Aug 27 05:03:37 2021 returned same result, skipped Retried build at Mon Aug 30 10:52:02 2021 returned same result, skipped Retried build at Wed Sep 1 11:09:18 2021 returned same result, skipped Retried build at Fri Sep 3 08:40:10 2021 returned same result, skipped Retried build at Tue Sep 7 02:15:16 2021 returned same result, skipped Retried build at Tue Sep 7 12:25:38 2021 returned same result, skipped Retried build at Wed Sep 8 01:52:27 2021 returned same result, skipped Retried build at Thu Sep 9 00:33:13 2021 returned same result, skipped Retried build at Thu Sep 9 12:55:55 2021 returned same result, skipped Retried build at Mon Sep 13 08:59:44 2021 returned same result, skipped Retried build at Mon Sep 13 12:40:49 2021 returned same result, skipped Retried build at Wed Sep 15 00:22:11 2021 returned same result, skipped Retried build at Wed Sep 15 10:08:15 2021 returned same result, skipped Retried build at Fri Sep 17 13:21:06 2021 returned same result, skipped Retried build at Fri Sep 24 14:01:40 2021 returned same result, skipped Retried build at Mon Sep 27 12:40:26 2021 returned same result, skipped