[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw28 started "build _service:gbs:hal-api-sensor.spec" at Wed Jul 14 01:43:36 UTC 2021. [ 0s] [ 0s] Building hal-api-sensor for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '8c4ec0c13a156c43f2e7eaa3a9e1e85e' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-api-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-api-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-api-sensor.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling libzstd1... [ 2s] [8/41] preinstalling bash... [ 2s] [9/41] preinstalling diffutils... [ 2s] [10/41] preinstalling grep... [ 2s] [11/41] preinstalling libattr... [ 2s] [12/41] preinstalling libblkid... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 2s] [16/41] preinstalling liblua... [ 2s] [17/41] preinstalling liblzma... [ 2s] [18/41] preinstalling libpopt... [ 2s] [19/41] preinstalling libreadline... [ 2s] [20/41] preinstalling libsmack... [ 2s] [21/41] preinstalling libsqlite... [ 2s] [22/41] preinstalling libuuid... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 11s] [28/41] preinstalling coreutils... [ 11s] [29/41] preinstalling libacl... [ 11s] [30/41] preinstalling libelf... [ 11s] [31/41] preinstalling libmount... [ 11s] [32/41] preinstalling smack... [ 11s] [33/41] preinstalling bzip2... [ 11s] [34/41] preinstalling libmagic... [ 11s] [35/41] preinstalling libxml2... [ 11s] [36/41] preinstalling tar... [ 11s] [37/41] preinstalling util-linux... [ 11s] [38/41] preinstalling util-linux-su... [ 11s] [39/41] preinstalling nss... [ 11s] [40/41] preinstalling libsoftokn3... [ 11s] [41/41] preinstalling rpm... [ 11s] [ 12s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-armv7l postinstall script [ 12s] running setup postinstall script [ 12s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 12s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 12s] initializing rpm db... [ 12s] reordering...cycle: gio-branding-upstream -> libgio [ 12s] breaking dependency libgio -> gio-branding-upstream [ 12s] cycle: libsoftokn3 -> nss [ 12s] breaking dependency nss -> libsoftokn3 [ 12s] done [ 12s] [1/132] installing dlog-config-persistent-logs-6.5.8-116.15 [ 12s] [2/132] installing libmagic-data-5.39-4.160 [ 13s] [3/132] installing setup-0.9-4.38 [ 13s] warning: /etc/profile created as /etc/profile.rpmnew [ 13s] [4/132] installing filesystem-3.1-4.1 [ 13s] [5/132] installing glibc-2.30-10.1 [ 14s] [6/132] installing libatomic-9.2.0-12.7 [ 14s] [7/132] installing libgcc-9.2.0-12.7 [ 15s] [8/132] installing libzstd1-1.4.5-1.139 [ 15s] [9/132] installing bash-3.2.57-4.5 [ 15s] [10/132] installing capi-base-common-0.4.63-47.1 [ 16s] [11/132] installing cpio-2.8-5.3 [ 16s] [12/132] installing diffutils-3.3-4.3 [ 16s] [13/132] installing findutils-4.3.8-4.70 [ 16s] [14/132] installing gdbm-1.8.3-3.267 [ 16s] [15/132] installing hostname-3.23-3.3 [ 16s] [16/132] installing libattr-2.4.48-4.186 [ 17s] [17/132] installing libblkid-2.36-7.33 [ 17s] [18/132] installing libbz2-1.0.8-4.203 [ 17s] [19/132] installing libcap-2.24-3.245 [ 18s] [20/132] installing libexpat-2.2.9-3.143 [ 18s] [21/132] installing libext2fs-1.46.0-4.19 [ 19s] [22/132] installing libffi-3.3-4.189 [ 19s] [23/132] installing libfreebl3-3.34.1-3.199 [ 19s] [24/132] installing libgfortran-9.2.0-12.7 [ 20s] [25/132] installing libgomp-9.2.0-12.7 [ 20s] [26/132] installing libitm-9.2.0-12.7 [ 21s] [27/132] installing libjson-0.15-12.5 [ 21s] [28/132] installing libltdl-2.4.2-3.210 [ 21s] [29/132] installing liblua-5.1.5-3.160 [ 22s] [30/132] installing liblzma-5.2.5-4.113 [ 22s] [31/132] installing libopenssl11-1.1.1k-5.44 [ 23s] [32/132] installing libpcre-8.44-4.30 [ 23s] [33/132] installing libpopt-1.16-3.243 [ 23s] [34/132] installing libpython3_9m1_0-3.9.1-8.18 [ 24s] [35/132] installing libsmack-1.3.1-3.237 [ 24s] [36/132] installing libsmartcols-2.36-7.33 [ 25s] [37/132] installing libsqlite-3.33.0-4.168 [ 25s] [38/132] installing libstdc++-9.2.0-12.7 [ 26s] [39/132] installing libuuid-2.36-7.33 [ 26s] [40/132] installing m4-1.4.17-3.3 [ 26s] [41/132] installing net-tools-2.0_20121208git-4.4 [ 26s] [42/132] installing nspr-4.12-3.244 [ 27s] [43/132] installing patch-2.7-6.67 [ 27s] [44/132] installing pkg-config-0.28-3.238 [ 27s] [45/132] installing sed-4.1c-4.2 [ 27s] [46/132] installing update-alternatives-1.20.5-3.4 [ 27s] [47/132] installing which-2.17-4.4 [ 27s] [48/132] installing zlib-1.2.11-3.252 [ 27s] [49/132] installing build-compare-2015.04.28-3.98 [ 27s] [50/132] installing libstdc++-devel-9.2.0-12.7 [ 28s] [51/132] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 30s] [52/132] installing terminfo-base-full-6.2-6.20 [ 30s] [53/132] installing capi-base-common-devel-0.4.63-47.1 [ 30s] [54/132] installing cpp-9.2.0-12.7 [ 31s] [55/132] installing gcc-c++-9.2.0-12.7 [ 32s] [56/132] installing libblkid-devel-2.36-7.33 [ 32s] [57/132] installing libffi-devel-3.3-4.189 [ 32s] [58/132] installing binutils-2.33.1-9.20 [ 33s] [59/132] installing coreutils-6.9-5.27 [ 33s] [60/132] installing gawk-3.1.5-4.4 [ 33s] [61/132] installing grep-2.5.2-3.4 [ 33s] [62/132] installing gtest-1.10.0-6.2 [ 34s] [63/132] installing libacl-2.2.53-4.186 [ 34s] [64/132] installing libcc1-9.2.0-12.7 [ 35s] [65/132] installing libelf-0.178-3.141 [ 35s] [66/132] installing libglib-2.62.3-30.38 [ 35s] [67/132] installing libmount-2.36-7.33 [ 36s] [68/132] installing libpcreposix-8.44-4.30 [ 36s] [69/132] installing libubsan-9.2.0-12.7 [ 37s] [70/132] installing make-4.0-2.71 [ 37s] [71/132] installing nss-certs-3.34.1-3.199 [ 37s] [72/132] installing smack-1.3.1-3.237 [ 37s] [73/132] installing bzip2-1.0.8-4.203 [ 37s] [74/132] installing libfdisk-2.36-7.33 [ 38s] [75/132] installing libmagic-5.39-4.160 [ 38s] [76/132] installing libpcrecpp-8.44-4.30 [ 38s] [77/132] installing libxml2-2.9.12-7.2 [ 39s] [78/132] installing perl-5.32.0-4.92 [ 41s] [79/132] installing xz-5.2.5-4.113 [ 42s] [80/132] installing dlog-6.5.8-116.15 [ 42s] [81/132] installing build-mkbaselibs-20120927-3.3 [ 42s] [82/132] installing gtest-devel-1.10.0-6.2 [ 42s] [83/132] installing linux-glibc-devel-3.10-4.93 [ 43s] [84/132] installing autoconf-2.69-3.157 [ 43s] [85/132] installing dlog-logger-6.5.8-116.15 [ 43s] [86/132] installing file-5.39-4.160 [ 43s] [87/132] installing glibc-locale-2.30-10.1 [ 44s] [88/132] installing libgmodule-2.62.3-30.38 [ 45s] [89/132] installing libgthread-2.62.3-30.38 [ 45s] [90/132] installing libmount-devel-2.36-7.33 [ 45s] [91/132] installing tar-1.17-3.2 [ 45s] [92/132] installing tizen-platform-config-5.0-15.5 [ 47s] [93/132] installing gzip-1.3.12-3.244 [ 47s] [94/132] installing libgobject-2.62.3-30.38 [ 47s] [95/132] installing libncurses6-6.2-6.20 [ 48s] [96/132] installing pam-1.1.6-3.4 [ 48s] [97/132] installing tzdata-2020a-3.3 [ 49s] [98/132] installing libdw-0.178-3.141 [ 49s] [99/132] installing pcre-devel-8.44-4.30 [ 49s] [100/132] installing libarchive-3.5.1-2.38 [ 49s] [101/132] installing shared-mime-info-1.7-5.22 [ 58s] [102/132] installing gcc-9.2.0-12.7 [ 59s] [103/132] installing libncurses-6.2-6.20 [ 59s] [104/132] installing glibc-devel-2.30-10.1 [ 60s] [105/132] installing qemu-accel-x86_64-armv7l-0.4-8.9 [ 70s] [106/132] installing automake-1.15.1-3.171 [ 70s] [107/132] installing less-466-3.4 [ 70s] [108/132] installing libreadline-5.2-3.70 [ 70s] [109/132] installing libtzplatform-config-5.0-15.5 [ 71s] [110/132] installing procps-ng-3.3.16-3.4 [ 71s] [111/132] installing libasm-0.178-3.141 [ 71s] [112/132] installing build-20120927-3.3 [ 72s] [113/132] installing libdlog-6.5.8-116.15 [ 72s] [114/132] installing libdlog-devel-6.5.8-116.15 [ 72s] [115/132] installing zlib-devel-1.2.11-3.252 [ 72s] [116/132] installing libtool-2.4.2-3.210 [ 72s] [117/132] installing elfutils-0.178-3.141 [ 72s] [118/132] installing python3-base-3.9.1-8.18 [ 74s] [119/132] installing util-linux-2.36-7.33 [ 74s] [120/132] installing python3-3.9.1-8.21 [ 74s] [121/132] installing util-linux-su-2.36-7.33 [ 74s] [122/132] installing cmake-3.16.4-4.2 [ 75s] [123/132] installing nss-3.34.1-3.199 [ 76s] [124/132] installing libgio-2.62.3-30.38 [ 76s] [125/132] installing gio-branding-upstream-2.62.3-30.38 [ 76s] [126/132] installing libsoftokn3-3.34.1-3.199 [ 76s] [127/132] installing glib2-tools-2.62.3-30.38 [ 77s] [128/132] installing hal-api-common-0.0.1-23.1 [ 77s] /opt/etc/hal: No such file or directory [ 77s] /opt/etc/hal: No such file or directory [ 77s] [129/132] installing rpm-4.14.1.1-8.28 [ 78s] [130/132] installing hal-api-common-devel-0.0.1-23.1 [ 78s] [131/132] installing glib2-devel-2.62.3-30.38 [ 78s] [132/132] installing rpm-build-4.14.1.1-8.28 [ 78s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 78s] now finalizing build dir... [ 79s] Running build time source services... [ 79s] build target is armv7l-tizen-linux [ 79s] ----------------------------------------------------------------- [ 79s] I have the following modifications for hal-api-sensor.spec: [ 79s] 10c10 [ 79s] < Release: 1 [ 79s] --- [ 79s] > Release: 11.1 [ 79s] ----------------------------------------------------------------- [ 79s] ----- building hal-api-sensor.spec (user abuild) [ 79s] ----------------------------------------------------------------- [ 79s] ----------------------------------------------------------------- [ 79s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/8c4ec0c13a156c43f2e7eaa3a9e1e85e-hal-api-sensor' -ba /home/abuild/rpmbuild/SOURCES/hal-api-sensor.spec [ 79s] Building target platforms: armv7l-tizen-linux [ 79s] Building for target armv7l-tizen-linux [ 79s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.xe1lHy [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + rm -rf hal-api-sensor-0.0.1 [ 79s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-api-sensor-0.0.1.tar.gz [ 79s] + /bin/tar -xof - [ 79s] + STATUS=0 [ 79s] + '[' 0 -ne 0 ']' [ 79s] + cd hal-api-sensor-0.0.1 [ 79s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 79s] + exit 0 [ 79s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SYfjox [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd hal-api-sensor-0.0.1 [ 79s] ++ uname -m [ 79s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 79s] + LANG=C [ 79s] + export LANG [ 79s] + unset DISPLAY [ 79s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 79s] + export CFLAGS [ 79s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 79s] + export CXXFLAGS [ 79s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 79s] + export FFLAGS [ 79s] + LDFLAGS= [ 79s] + export LDFLAGS [ 79s] + cp /home/abuild/rpmbuild/SOURCES/hal-api-sensor.manifest . [ 79s] + cp /home/abuild/rpmbuild/SOURCES/hal-api-sensor-devel.manifest . [ 80s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_LIBDIR_PREFIX=/usr/lib -DHALTEST=on [ 80s] -- The CXX compiler identification is GNU 9.2.0 [ 80s] -- Check for working CXX compiler: /bin/c++ [ 80s] -- Check for working CXX compiler: /bin/c++ -- works [ 80s] -- Detecting CXX compiler ABI info [ 80s] -- Detecting CXX compiler ABI info - done [ 80s] -- Detecting CXX compile features [ 80s] -- Detecting CXX compile features - done [ 80s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 80s] -- Checking for modules 'dlog;hal-api-common' [ 80s] -- Found dlog, version 1.0 [ 81s] -- Found hal-api-common, version 0.1.0 [ 81s] -- Checking for modules 'hal-api-common;glib-2.0;gio-2.0;gmock;dlog' [ 82s] -- Found hal-api-common, version 0.1.0 [ 82s] -- Found glib-2.0, version 2.62.3 [ 82s] -- Found gio-2.0, version 2.62.3 [ 83s] -- Found gmock, version 1.10.0 [ 83s] -- Found dlog, version 1.0 [ 84s] -- Configuring done [ 84s] -- Generating done [ 84s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-api-sensor-0.0.1 [ 84s] + make -j8 [ 84s] Scanning dependencies of target hal-api-sensor [ 84s] [ 20%] Building CXX object CMakeFiles/hal-api-sensor.dir/src/hal-api-sensor.cpp.o [ 85s] [ 40%] Linking CXX shared library out/lib/libhal-api-sensor.so [ 85s] [ 40%] Built target hal-api-sensor [ 85s] Scanning dependencies of target sensor-haltests [ 85s] [ 60%] Building CXX object haltest/CMakeFiles/sensor-haltests.dir/main.cpp.o [ 85s] [ 80%] Building CXX object haltest/CMakeFiles/sensor-haltests.dir/sensor-device.cpp.o [ 89s] [100%] Linking CXX executable ../out/sensor-haltests [ 89s] [100%] Built target sensor-haltests [ 89s] + exit 0 [ 89s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.zDCm8x [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd hal-api-sensor-0.0.1 [ 89s] + LANG=C [ 89s] + export LANG [ 89s] + unset DISPLAY [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm [ 89s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm [ 89s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm install [ 89s] [ 40%] Built target hal-api-sensor [ 89s] [100%] Built target sensor-haltests [ 89s] Install the project... [ 89s] -- Install configuration: "" [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/lib/hal/libhal-api-sensor.so.0.1.0 [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/lib/hal/libhal-api-sensor.so.0 [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/lib/hal/libhal-api-sensor.so [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/include/hal [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/include/hal/hal-sensor-types.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/include/hal/hal-sensor-interface.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/include/hal/hal-sensor.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/lib/pkgconfig/hal-api-sensor.pc [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/bin/hal/sensor-haltests [ 89s] -- Set runtime path of "/home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/bin/hal/sensor-haltests" to "" [ 89s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/info/dir [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm -regex '.*\.la$' [ 89s] + xargs rm -f -- [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm -regex '.*\.a$' [ 89s] + xargs rm -f -- [ 89s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 0.0.1-11.1 --unique-debug-src-base hal-api-sensor-0.0.1-11.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-api-sensor-0.0.1 [ 90s] 1+0 records in [ 90s] 1+0 records out [ 90s] 1+0 records in [ 90s] 1+0 records out [ 90s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.00106678 s, 6.6 kB/s [ 90s] , 0.00106678 s, 6.6 kB/s [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/lib/hal/libhal-api-sensor.so.0.1.0 [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/bin/hal/sensor-haltests [ 90s] 0+0 records in [ 90s] 0+0 records out [ 90s] 0 bytes (0 B) copied, 0.000841886 s, 0.0 kB/s [ 90s] 0+0 records in [ 90s] 0+0 records out [ 90s] 0 bytes (0 B) copied, 0.000784716 s, 0.0 kB/s [ 90s] 68 blocks [ 90s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-api-sensor-0.0.1/hal-api-sensor-debuginfo.manifest [ 90s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-api-sensor-0.0.1/hal-api-sensor-debugsource.manifest [ 90s] + /usr/lib/rpm/check-buildroot [ 90s] + /usr/lib/rpm//brp-compress [ 90s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 90s] + /usr/lib/rpm/brp-python-hardlink [ 90s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm [ 90s] Processing files: hal-api-sensor-0.0.1-11.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 90s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 90s] [ 90s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.FI1gCz [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd hal-api-sensor-0.0.1 [ 90s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/hal-api-sensor [ 90s] + export LC_ALL=C [ 90s] + LC_ALL=C [ 90s] + export LICENSEDIR [ 90s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/hal-api-sensor [ 90s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/hal-api-sensor [ 90s] + exit 0 [ 90s] Provides: hal-api-sensor = 0.0.1-11.1 hal-api-sensor(armv7l-32) = 0.0.1-11.1 libhal-api-sensor.so.0 [ 90s] Requires(interp): /bin/sh /bin/sh [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Requires(post): /bin/sh /sbin/ldconfig [ 90s] Requires(postun): /bin/sh /sbin/ldconfig [ 90s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libhal-api-common.so.0 libhal-api-sensor.so.0 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH) [ 90s] Processing files: hal-api-sensor-debugsource-0.0.1-11.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Provides: hal-api-sensor-debugsource = 0.0.1-11.1 hal-api-sensor-debugsource(armv7l-32) = 0.0.1-11.1 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Processing files: hal-api-sensor-devel-0.0.1-11.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 90s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 90s] [ 90s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.RcY4WA [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd hal-api-sensor-0.0.1 [ 90s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/hal-api-sensor-devel [ 90s] + export LC_ALL=C [ 90s] + LC_ALL=C [ 90s] + export LICENSEDIR [ 90s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/hal-api-sensor-devel [ 90s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/hal-api-sensor-devel [ 90s] + exit 0 [ 91s] Provides: hal-api-sensor-devel = 0.0.1-11.1 hal-api-sensor-devel(armv7l-32) = 0.0.1-11.1 pkgconfig(hal-api-sensor) = 0.1.0 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: /usr/bin/pkg-config [ 91s] Processing files: sensor-haltests-0.0.1-11.1.armv7l [ 91s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 91s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 91s] [ 91s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ExvwRA [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd hal-api-sensor-0.0.1 [ 91s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/sensor-haltests [ 91s] + export LC_ALL=C [ 91s] + LC_ALL=C [ 91s] + export LICENSEDIR [ 91s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/sensor-haltests [ 91s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm/usr/share/licenses/sensor-haltests [ 91s] + exit 0 [ 91s] Provides: sensor-haltests = 0.0.1-11.1 sensor-haltests(armv7l-32) = 0.0.1-11.1 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgtest.so libhal-api-sensor.so.0 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.23) libstdc++.so.6(GLIBCXX_3.4.26) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 91s] Processing files: hal-api-sensor-debuginfo-0.0.1-11.1.armv7l [ 91s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 91s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Provides: hal-api-sensor-debuginfo = 0.0.1-11.1 hal-api-sensor-debuginfo(armv7l-32) = 0.0.1-11.1 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Recommends: hal-api-sensor-debugsource(armv7l-32) = 0.0.1-11.1 [ 91s] Processing files: sensor-haltests-debuginfo-0.0.1-11.1.armv7l [ 91s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 91s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Provides: sensor-haltests-debuginfo = 0.0.1-11.1 sensor-haltests-debuginfo(armv7l-32) = 0.0.1-11.1 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Recommends: hal-api-sensor-debugsource(armv7l-32) = 0.0.1-11.1 [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-api-sensor-0.0.1-11.1.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-0.0.1-11.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-debugsource-0.0.1-11.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-devel-0.0.1-11.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-haltests-0.0.1-11.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-debuginfo-0.0.1-11.1.armv7l.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/sensor-haltests-debuginfo-0.0.1-11.1.armv7l.rpm [ 92s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.AdoHJx [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd hal-api-sensor-0.0.1 [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-sensor-0.0.1-11.1.arm [ 92s] + exit 0 [ 92s] ... checking for files with abuild user/group [ 92s] ... creating baselibs [ 92s] ... comparing built packages with the former built [ 92s] /usr/lib/build/pkg-diff.sh [ 92s] compare /.build.oldpackages/hal-api-sensor-0.0.1-10.1.src.rpm /home/abuild/rpmbuild/SRPMS/hal-api-sensor-0.0.1-11.1.src.rpm [ 93s] This is not a prerelease project. Compare the project name. [ 93s] comparing rpmtags [ 93s] comparing RELEASE [ 93s] comparing PROVIDES [ 93s] comparing scripts [ 93s] comparing filelist [ 93s] comparing file checksum [ 93s] RPM meta information is identical [ 93s] compare /.build.oldpackages/hal-api-sensor-0.0.1-10.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-0.0.1-11.1.armv7l.rpm [ 93s] Comparing hal-api-sensor-0.0.1-10.1.armv7l.rpm to hal-api-sensor-0.0.1-11.1.armv7l.rpm [ 93s] This is not a prerelease project. Compare the project name. [ 93s] comparing rpmtags [ 93s] --- /tmp/tmp.qvXs119694/tmp.lDFh119712 2021-07-14 01:45:09.652305244 +0000 [ 93s] +++ /tmp/tmp.qvXs119694/tmp.Zxsr119719 2021-07-14 01:45:09.664304997 +0000 [ 93s] @@ -8,4 +8,4 @@ [ 93s] cpio xz 5T [ 93s] [ 93s] (none) (none) (none) [ 93s] -obs://build.tizen.org/Tizen:Unified/standard/5ba5d5cf6484c5d9d3b96059d0497350-hal-api-sensor Tizen:Unified [ 93s] +obs://build.tizen.org/Tizen:Unified/standard/8c4ec0c13a156c43f2e7eaa3a9e1e85e-hal-api-sensor Tizen:Unified [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/hal-api-sensor-debuginfo-0.0.1-10.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-debuginfo-0.0.1-11.1.armv7l.rpm [ 93s] skipping -debuginfo package [ 93s] compare /.build.oldpackages/hal-api-sensor-debugsource-0.0.1-10.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-debugsource-0.0.1-11.1.armv7l.rpm [ 93s] Comparing hal-api-sensor-debugsource-0.0.1-10.1.armv7l.rpm to hal-api-sensor-debugsource-0.0.1-11.1.armv7l.rpm [ 93s] This is not a prerelease project. Compare the project name. [ 93s] comparing rpmtags [ 93s] --- /tmp/tmp.CyPW119746/tmp.rrmU119767 2021-07-14 01:45:09.960298887 +0000 [ 93s] +++ /tmp/tmp.CyPW119746/tmp.LrBJ119769 2021-07-14 01:45:09.964298805 +0000 [ 93s] @@ -10,4 +10,4 @@ [ 93s] cpio xz 5T [ 93s] [ 93s] (none) (none) (none) [ 93s] -obs://build.tizen.org/Tizen:Unified/standard/5ba5d5cf6484c5d9d3b96059d0497350-hal-api-sensor Tizen:Unified [ 93s] +obs://build.tizen.org/Tizen:Unified/standard/8c4ec0c13a156c43f2e7eaa3a9e1e85e-hal-api-sensor Tizen:Unified [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/hal-api-sensor-devel-0.0.1-10.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-api-sensor-devel-0.0.1-11.1.armv7l.rpm [ 94s] Comparing hal-api-sensor-devel-0.0.1-10.1.armv7l.rpm to hal-api-sensor-devel-0.0.1-11.1.armv7l.rpm [ 94s] This is not a prerelease project. Compare the project name. [ 94s] comparing rpmtags [ 94s] --- /tmp/tmp.GcwZ119790/tmp.qLAn119808 2021-07-14 01:45:10.264292612 +0000 [ 94s] +++ /tmp/tmp.GcwZ119790/tmp.SQLs119810 2021-07-14 01:45:10.272292446 +0000 [ 94s] @@ -8,4 +8,4 @@ [ 94s] cpio xz 5T [ 94s] [ 94s] (none) (none) (none) [ 94s] -obs://build.tizen.org/Tizen:Unified/standard/5ba5d5cf6484c5d9d3b96059d0497350-hal-api-sensor Tizen:Unified [ 94s] +obs://build.tizen.org/Tizen:Unified/standard/8c4ec0c13a156c43f2e7eaa3a9e1e85e-hal-api-sensor Tizen:Unified [ 94s] RPM meta information is different [ 94s] compare /.build.oldpackages/sensor-haltests-0.0.1-10.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-haltests-0.0.1-11.1.armv7l.rpm [ 94s] Comparing sensor-haltests-0.0.1-10.1.armv7l.rpm to sensor-haltests-0.0.1-11.1.armv7l.rpm [ 94s] This is not a prerelease project. Compare the project name. [ 94s] comparing rpmtags [ 94s] --- /tmp/tmp.jPqm119828/tmp.eVPG119846 2021-07-14 01:45:10.624285181 +0000 [ 94s] +++ /tmp/tmp.jPqm119828/tmp.XLxy119848 2021-07-14 01:45:10.632285015 +0000 [ 94s] @@ -8,4 +8,4 @@ [ 94s] cpio xz 5T [ 94s] [ 94s] (none) (none) (none) [ 94s] -obs://build.tizen.org/Tizen:Unified/standard/5ba5d5cf6484c5d9d3b96059d0497350-hal-api-sensor Tizen:Unified [ 94s] +obs://build.tizen.org/Tizen:Unified/standard/8c4ec0c13a156c43f2e7eaa3a9e1e85e-hal-api-sensor Tizen:Unified [ 94s] RPM meta information is different [ 94s] compare /.build.oldpackages/sensor-haltests-debuginfo-0.0.1-10.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/sensor-haltests-debuginfo-0.0.1-11.1.armv7l.rpm [ 94s] skipping -debuginfo package [ 94s] [ 94s] obspw28 finished "build hal-api-sensor.spec" at Wed Jul 14 01:45:10 UTC 2021. [ 94s] Retried build at Fri Jul 16 14:05:50 2021 returned same result, skipped Retried build at Fri Jul 16 16:10:03 2021 returned same result, skipped Retried build at Mon Jul 19 02:36:28 2021 returned same result, skipped Retried build at Wed Jul 21 12:38:24 2021 returned same result, skipped Retried build at Tue Aug 3 12:43:50 2021 returned same result, skipped Retried build at Fri Aug 20 10:20:44 2021 returned same result, skipped Retried build at Mon Aug 23 07:22:32 2021 returned same result, skipped Retried build at Fri Aug 27 04:59:09 2021 returned same result, skipped Retried build at Wed Sep 1 11:10:04 2021 returned same result, skipped Retried build at Tue Sep 7 12:21:06 2021 returned same result, skipped Retried build at Wed Sep 8 01:49:08 2021 returned same result, skipped Retried build at Thu Sep 9 12:53:23 2021 returned same result, skipped Retried build at Mon Sep 13 09:20:38 2021 returned same result, skipped Retried build at Mon Sep 13 12:35:57 2021 returned same result, skipped Retried build at Wed Sep 15 10:02:59 2021 returned same result, skipped Retried build at Fri Sep 17 13:21:09 2021 returned same result, skipped Retried build at Fri Sep 24 13:56:22 2021 returned same result, skipped Retried build at Mon Sep 27 12:40:01 2021 returned same result, skipped