[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw02 started "build _service:gbs:perl-XML-SAX.spec" at Tue Jan 19 21:07:40 UTC 2021. [ 0s] [ 0s] Building perl-XML-SAX for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '6df88b3e1f2a97e4902c4a1e352e5ab7' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:perl-XML-SAX.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:perl-XML-SAX.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:perl-XML-SAX.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling libzstd1... [ 1s] [8/41] preinstalling bash... [ 1s] [9/41] preinstalling diffutils... [ 1s] [10/41] preinstalling grep... [ 1s] [11/41] preinstalling libattr... [ 1s] [12/41] preinstalling libblkid... [ 1s] [13/41] preinstalling libbz2... [ 1s] [14/41] preinstalling libcap... [ 1s] [15/41] preinstalling libfreebl3... [ 1s] [16/41] preinstalling liblua... [ 1s] [17/41] preinstalling liblzma... [ 1s] [18/41] preinstalling libpopt... [ 1s] [19/41] preinstalling libreadline... [ 1s] [20/41] preinstalling libsmack... [ 1s] [21/41] preinstalling libsqlite... [ 1s] [22/41] preinstalling libuuid... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/103] installing libmagic-data-5.39-4.36 [ 9s] [2/103] installing perl-XML-NamespaceSupport-1.12-1.6 [ 9s] [3/103] installing setup-0.9-4.17 [ 9s] warning: /etc/profile created as /etc/profile.rpmnew [ 9s] [4/103] installing filesystem-3.1-3.2 [ 9s] [5/103] installing glibc-2.30-5.32 [ 10s] [6/103] installing libatomic-9.2.0-7.24 [ 10s] [7/103] installing libgcc-9.2.0-7.24 [ 10s] [8/103] installing libzstd1-1.4.5-1.1 [ 11s] [9/103] installing bash-3.2.57-4.2 [ 11s] [10/103] installing cpio-2.11-3.1 [ 11s] [11/103] installing diffutils-3.3-3.1 [ 11s] [12/103] installing findutils-4.3.8-3.101 [ 11s] [13/103] installing gdbm-1.8.3-3.115 [ 11s] [14/103] installing hostname-3.23-3.1 [ 11s] [15/103] installing libattr-2.4.48-4.45 [ 11s] [16/103] installing libblkid-2.36-7.10 [ 12s] [17/103] installing libbz2-1.0.8-4.61 [ 12s] [18/103] installing libcap-2.24-3.110 [ 12s] [19/103] installing libext2fs-1.43.4-3.1 [ 13s] [20/103] installing libfreebl3-3.34.1-3.76 [ 13s] [21/103] installing libgfortran-9.2.0-7.24 [ 13s] [22/103] installing libgomp-9.2.0-7.24 [ 14s] [23/103] installing libitm-9.2.0-7.24 [ 14s] [24/103] installing libltdl-2.4.2-3.81 [ 14s] [25/103] installing liblua-5.1.5-3.89 [ 15s] [26/103] installing liblzma-5.2.5-4.4 [ 15s] [27/103] installing libopenssl11-1.1.1g-3.70 [ 15s] [28/103] installing libpcre-8.44-4.8 [ 16s] [29/103] installing libpopt-1.16-3.109 [ 16s] [30/103] installing libsmack-1.3.1-3.105 [ 16s] [31/103] installing libsmartcols-2.36-7.10 [ 17s] [32/103] installing libsqlite-3.33.0-4.34 [ 17s] [33/103] installing libstdc++-9.2.0-7.24 [ 18s] [34/103] installing libuuid-2.36-7.10 [ 18s] [35/103] installing m4-1.4.17-2.1 [ 18s] [36/103] installing net-tools-2.0_20121208git-4.1 [ 18s] [37/103] installing nspr-4.12-3.109 [ 18s] [38/103] installing patch-2.7-3.102 [ 18s] [39/103] installing pkg-config-0.28-3.99 [ 18s] [40/103] installing sed-4.1c-3.1 [ 18s] [41/103] installing update-alternatives-1.20.5-3.1 [ 18s] [42/103] installing which-2.17-4.1 [ 18s] [43/103] installing zlib-1.2.11-3.107 [ 19s] [44/103] installing build-compare-2015.04.28-3.38 [ 19s] [45/103] installing libstdc++-devel-9.2.0-7.24 [ 19s] [46/103] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 21s] [47/103] installing terminfo-base-full-6.2-5.29 [ 21s] [48/103] installing cpp-9.2.0-7.24 [ 22s] [49/103] installing gcc-c++-9.2.0-7.24 [ 22s] [50/103] installing xz-devel-5.2.5-4.4 [ 22s] [51/103] installing binutils-2.33.1-7.30 [ 23s] [52/103] installing coreutils-6.9-4.25 [ 23s] [53/103] installing gawk-3.1.5-4.1 [ 23s] [54/103] installing grep-2.5.2-3.1 [ 23s] [55/103] installing libacl-2.2.53-4.46 [ 23s] [56/103] installing libcc1-9.2.0-7.24 [ 23s] [57/103] installing libelf-0.178-3.28 [ 24s] [58/103] installing libmount-2.36-7.10 [ 24s] [59/103] installing libubsan-9.2.0-7.24 [ 24s] [60/103] installing make-4.0-2.27 [ 25s] [61/103] installing nss-certs-3.34.1-3.76 [ 25s] [62/103] installing smack-1.3.1-3.105 [ 25s] [63/103] installing bzip2-1.0.8-4.61 [ 25s] [64/103] installing libfdisk-2.36-7.10 [ 25s] [65/103] installing libmagic-5.39-4.36 [ 26s] [66/103] installing libxml2-2.9.10-3.66 [ 26s] [67/103] installing perl-5.32.0-4.9 [ 28s] [68/103] installing xz-5.2.5-4.4 [ 28s] [69/103] installing build-mkbaselibs-20120927-3.2 [ 28s] [70/103] installing linux-glibc-devel-3.10-3.115 [ 29s] [71/103] installing autoconf-2.69-3.60 [ 29s] [72/103] installing file-5.39-4.36 [ 29s] [73/103] installing glibc-locale-2.30-5.32 [ 30s] [74/103] installing tar-1.17-2.3 [ 30s] [75/103] installing gzip-1.3.12-3.109 [ 30s] [76/103] installing libncurses6-6.2-5.29 [ 30s] [77/103] installing pam-1.1.6-3.1 [ 31s] [78/103] installing tzdata-2020a-3.1 [ 31s] [79/103] installing libdw-0.178-3.28 [ 31s] [80/103] installing libarchive-3.4.0-1.2 [ 32s] [81/103] installing gcc-9.2.0-7.24 [ 33s] [82/103] installing libncurses-6.2-5.29 [ 33s] [83/103] installing glibc-devel-2.30-5.32 [ 33s] [84/103] installing qemu-accel-x86_64-armv7l-0.4-4.1 [ 40s] [85/103] installing automake-1.15.1-3.75 [ 40s] [86/103] installing less-466-3.1 [ 40s] [87/103] installing libreadline-5.2-3.15 [ 40s] [88/103] installing procps-ng-3.3.16-3.1 [ 41s] [89/103] installing libasm-0.178-3.28 [ 41s] [90/103] installing build-20120927-3.2 [ 41s] [91/103] installing ncurses-devel-6.2-5.29 [ 41s] [92/103] installing readline-devel-5.2-3.15 [ 41s] [93/103] installing zlib-devel-1.2.11-3.107 [ 41s] [94/103] installing libtool-2.4.2-3.81 [ 41s] [95/103] installing libxml2-tools-2.9.10-3.66 [ 41s] [96/103] installing elfutils-0.178-3.28 [ 41s] [97/103] installing util-linux-2.36-7.10 [ 41s] [98/103] installing util-linux-su-2.36-7.10 [ 41s] [99/103] installing libxml2-devel-2.9.10-3.66 [ 41s] [100/103] installing nss-3.34.1-3.76 [ 42s] [101/103] installing libsoftokn3-3.34.1-3.76 [ 42s] [102/103] installing rpm-4.14.1.1-5.1 [ 43s] [103/103] installing rpm-build-4.14.1.1-5.1 [ 43s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 43s] now finalizing build dir... [ 43s] Running build time source services... [ 43s] build target is armv7l-tizen-linux [ 43s] ----------------------------------------------------------------- [ 43s] I have the following modifications for perl-XML-SAX.spec: [ 43s] 21c21 [ 43s] < Release: 6 [ 43s] --- [ 43s] > Release: 1.6 [ 43s] ----------------------------------------------------------------- [ 43s] ----- building perl-XML-SAX.spec (user abuild) [ 43s] ----------------------------------------------------------------- [ 43s] ----------------------------------------------------------------- [ 44s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/6df88b3e1f2a97e4902c4a1e352e5ab7-perl-XML-SAX' -ba /home/abuild/rpmbuild/SOURCES/perl-XML-SAX.spec [ 45s] Building target platforms: armv7l-tizen-linux [ 45s] Building for target armv7l-tizen-linux [ 45s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bymUiA [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + rm -rf XML-SAX-1.02 [ 45s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/XML-SAX-1.02.tar.bz2 [ 45s] + /bin/tar -xof - [ 45s] + STATUS=0 [ 45s] + '[' 0 -ne 0 ']' [ 45s] + cd XML-SAX-1.02 [ 45s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 45s] + cp /home/abuild/rpmbuild/SOURCES/perl-XML-SAX.manifest . [ 45s] + exit 0 [ 45s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ogbLDw [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd XML-SAX-1.02 [ 45s] ++ uname -m [ 45s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 45s] + LANG=C [ 45s] + export LANG [ 45s] + unset DISPLAY [ 45s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CFLAGS [ 45s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 45s] + export CXXFLAGS [ 45s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 45s] + export FFLAGS [ 45s] + LDFLAGS= [ 45s] + export LDFLAGS [ 45s] + perl Makefile.PL [ 46s] Warning: prerequisite XML::SAX::Base 1.05 not found. [ 46s] Checking if your kit is complete... [ 46s] Looks good [ 47s] Generating a Unix-style Makefile [ 47s] Writing Makefile for XML::SAX [ 47s] Writing MYMETA.yml and MYMETA.json [ 47s] + make -j8 [ 48s] cp lib/XML/SAX/PurePerl/Reader/URI.pm blib/lib/XML/SAX/PurePerl/Reader/URI.pm [ 48s] cp lib/XML/SAX/PurePerl/Reader.pm blib/lib/XML/SAX/PurePerl/Reader.pm [ 48s] cp lib/XML/SAX.pm blib/lib/XML/SAX.pm [ 48s] cp lib/XML/SAX/PurePerl/DTDDecls.pm blib/lib/XML/SAX/PurePerl/DTDDecls.pm [ 48s] cp lib/XML/SAX/PurePerl.pm blib/lib/XML/SAX/PurePerl.pm [ 48s] cp lib/XML/SAX/PurePerl/Exception.pm blib/lib/XML/SAX/PurePerl/Exception.pm [ 48s] cp lib/XML/SAX/DocumentLocator.pm blib/lib/XML/SAX/DocumentLocator.pm [ 48s] cp lib/XML/SAX/ParserFactory.pm blib/lib/XML/SAX/ParserFactory.pm [ 48s] cp lib/XML/SAX/Intro.pod blib/lib/XML/SAX/Intro.pod [ 48s] cp lib/XML/SAX/PurePerl/Reader/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/UnicodeExt.pm [ 48s] cp lib/XML/SAX/PurePerl/Productions.pm blib/lib/XML/SAX/PurePerl/Productions.pm [ 48s] cp lib/XML/SAX/PurePerl/Reader/String.pm blib/lib/XML/SAX/PurePerl/Reader/String.pm [ 48s] cp lib/XML/SAX/PurePerl/Reader/Stream.pm blib/lib/XML/SAX/PurePerl/Reader/Stream.pm [ 48s] cp lib/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm [ 48s] cp lib/XML/SAX/PurePerl/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/NoUnicodeExt.pm [ 48s] cp lib/XML/SAX/PurePerl/EncodingDetect.pm blib/lib/XML/SAX/PurePerl/EncodingDetect.pm [ 48s] cp lib/XML/SAX/PurePerl/DebugHandler.pm blib/lib/XML/SAX/PurePerl/DebugHandler.pm [ 48s] cp lib/XML/SAX/PurePerl/DocType.pm blib/lib/XML/SAX/PurePerl/DocType.pm [ 48s] cp lib/XML/SAX/PurePerl/XMLDecl.pm blib/lib/XML/SAX/PurePerl/XMLDecl.pm [ 48s] cp lib/XML/SAX/PurePerl/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/UnicodeExt.pm [ 49s] Manifying 6 pod documents [ 49s] + exit 0 [ 49s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.9GT4CA [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd XML-SAX-1.02 [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm [ 49s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm [ 49s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm install_vendor [ 50s] Manifying 6 pod documents [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/Intro.pod [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/DocumentLocator.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/ParserFactory.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/UnicodeExt.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/DocType.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Productions.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Reader.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/EncodingDetect.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/DTDDecls.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/DebugHandler.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/NoUnicodeExt.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/XMLDecl.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Exception.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Reader/UnicodeExt.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Reader/Stream.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Reader/URI.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/PurePerl/Reader/String.pm [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/man/man3/XML::SAX::PurePerl.3 [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/man/man3/XML::SAX::ParserFactory.3 [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/man/man3/XML::SAX::Intro.3 [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/man/man3/XML::SAX::DocumentLocator.3 [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/man/man3/XML::SAX::PurePerl::Reader.3 [ 51s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/man/man3/XML::SAX.3 [ 51s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/perllocal.pod [ 51s] + cat [ 51s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 51s] + xargs -0 -r rm [ 51s] + '[' armv7l == noarch ']' [ 51s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/perllocal.pod [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/info [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/doc/packages [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/doc/perl-XML-SAX [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/doc/perl-XML-SAX-1.02 [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/gtk-doc [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/doc [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/man [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm -regex '.*/man/man./.*.[0-9]' [ 51s] + xargs rm -f -- [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm -regex '.*/man/../man./.*.[0-9]' [ 51s] + xargs rm -f -- [ 51s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm -regex '.*/man/man./.*.[0-9]pm' [ 51s] + xargs rm -f -- [ 51s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1.02-1.6 --unique-debug-src-base perl-XML-SAX-1.02-1.6.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/XML-SAX-1.02 [ 52s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/XML-SAX-1.02/perl-XML-SAX-debuginfo.manifest [ 52s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/XML-SAX-1.02/perl-XML-SAX-debugsource.manifest [ 52s] + /usr/lib/rpm/check-buildroot [ 52s] + /usr/lib/rpm//brp-compress [ 52s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 52s] + /usr/lib/rpm/brp-python-hardlink [ 52s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm [ 52s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.KuDiky [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd XML-SAX-1.02 [ 52s] + exit 0 [ 52s] Processing files: perl-XML-SAX-1.02-1.6.armv7l [ 52s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 52s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 52s] [ 52s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.6JwmaB [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd XML-SAX-1.02 [ 52s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/licenses/perl-XML-SAX [ 52s] + export LC_ALL=C [ 52s] + LC_ALL=C [ 52s] + export LICENSEDIR [ 52s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/licenses/perl-XML-SAX [ 52s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm/usr/share/licenses/perl-XML-SAX [ 52s] + exit 0 [ 52s] warning: File listed twice: /usr/lib/perl5/vendor_perl/5.32.0/XML/SAX/ParserDetails.ini [ 54s] Provides: config(perl-XML-SAX) = 1.02-1.6 perl(XML::SAX) = 1.02 perl(XML::SAX::DocumentLocator) perl(XML::SAX::ParserFactory) = 1.02 perl(XML::SAX::PurePerl) perl(XML::SAX::PurePerl) = 1.02 perl(XML::SAX::PurePerl::DebugHandler) perl(XML::SAX::PurePerl::Exception) perl(XML::SAX::PurePerl::Productions) perl(XML::SAX::PurePerl::Reader) perl(XML::SAX::PurePerl::Reader::Stream) perl(XML::SAX::PurePerl::Reader::String) perl(XML::SAX::PurePerl::Reader::URI) perl-XML-SAX = 1.02-1.6 perl-XML-SAX(armv7l-32) = 1.02-1.6 [ 54s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 54s] Processing files: perl-XML-SAX-debugsource-1.02-1.6.armv7l [ 54s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/XML-SAX-1.02/debugsourcefiles.list [ 54s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 54s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 54s] [ 54s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm [ 54s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-XML-SAX-1.02-1.6.src.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-SAX-1.02-1.6.armv7l.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-SAX-debugsource-1.02-1.6.armv7l.rpm [ 54s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.74w8Ww [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd XML-SAX-1.02 [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-SAX-1.02-1.6.arm [ 54s] + exit 0 [ 54s] ... checking for files with abuild user/group [ 54s] ... creating baselibs [ 55s] ... comparing built packages with the former built [ 55s] /usr/lib/build/pkg-diff.sh [ 55s] compare /.build.oldpackages/perl-XML-SAX-1.02-1.5.src.rpm /home/abuild/rpmbuild/SRPMS/perl-XML-SAX-1.02-1.6.src.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] RPM meta information is identical [ 55s] compare /.build.oldpackages/perl-XML-SAX-1.02-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-SAX-1.02-1.6.armv7l.rpm [ 55s] Comparing perl-XML-SAX-1.02-1.5.armv7l.rpm to perl-XML-SAX-1.02-1.6.armv7l.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] creating rename script [ 55s] RPM meta information is identical [ 55s] compare /.build.oldpackages/perl-XML-SAX-debugsource-1.02-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-SAX-debugsource-1.02-1.6.armv7l.rpm [ 55s] Comparing perl-XML-SAX-debugsource-1.02-1.5.armv7l.rpm to perl-XML-SAX-debugsource-1.02-1.6.armv7l.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 56s] comparing scripts [ 56s] comparing filelist [ 56s] comparing file checksum [ 56s] creating rename script [ 56s] RPM meta information is identical [ 56s] compare validated built as identical ! [ 56s] [ 56s] obspw02 finished "build perl-XML-SAX.spec" at Tue Jan 19 21:08:36 UTC 2021. [ 56s] Retried build at Wed Jan 20 03:30:09 2021 returned same result, skipped Retried build at Mon Jan 25 08:28:03 2021 returned same result, skipped Retried build at Mon Feb 1 02:55:13 2021 returned same result, skipped Retried build at Fri Feb 5 09:29:27 2021 returned same result, skipped Retried build at Tue Feb 16 03:13:00 2021 returned same result, skipped Retried build at Mon Feb 22 05:15:42 2021 returned same result, skipped Retried build at Tue Feb 23 11:37:28 2021 returned same result, skipped Retried build at Wed Mar 3 11:46:17 2021 returned same result, skipped Retried build at Sun Mar 7 15:33:44 2021 returned same result, skipped Retried build at Mon Mar 8 04:01:32 2021 returned same result, skipped Retried build at Wed Mar 24 16:31:24 2021 returned same result, skipped Retried build at Wed Mar 31 09:52:38 2021 returned same result, skipped Retried build at Fri Apr 2 04:39:24 2021 returned same result, skipped Retried build at Mon May 3 17:39:29 2021 returned same result, skipped Retried build at Wed May 26 09:32:41 2021 returned same result, skipped Retried build at Mon May 31 11:28:53 2021 returned same result, skipped Retried build at Thu Jun 24 10:01:10 2021 returned same result, skipped Retried build at Mon Jun 28 03:37:59 2021 returned same result, skipped Retried build at Mon Jun 28 09:53:26 2021 returned same result, skipped Retried build at Tue Jul 6 21:06:35 2021 returned same result, skipped Retried build at Mon Jul 12 11:34:48 2021 returned same result, skipped Retried build at Fri Jul 16 15:07:02 2021 returned same result, skipped Retried build at Mon Jul 19 01:31:33 2021 returned same result, skipped Retried build at Mon Sep 13 08:06:22 2021 returned same result, skipped