[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw03 started "build _service:gbs:python-pycurl.spec" at Wed Mar 3 12:06:11 UTC 2021. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '36fe7d4dc38bb3e63fec5000957778f7' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling libzstd1... [ 1s] [8/41] preinstalling bash... [ 1s] [9/41] preinstalling diffutils... [ 1s] [10/41] preinstalling grep... [ 1s] [11/41] preinstalling libattr... [ 1s] [12/41] preinstalling libblkid... [ 1s] [13/41] preinstalling libbz2... [ 1s] [14/41] preinstalling libcap... [ 1s] [15/41] preinstalling libfreebl3... [ 1s] [16/41] preinstalling liblua... [ 1s] [17/41] preinstalling liblzma... [ 1s] [18/41] preinstalling libpopt... [ 1s] [19/41] preinstalling libreadline... [ 1s] [20/41] preinstalling libsmack... [ 1s] [21/41] preinstalling libsqlite... [ 1s] [22/41] preinstalling libuuid... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 9s] [37/41] preinstalling util-linux... [ 9s] [38/41] preinstalling util-linux-su... [ 9s] [39/41] preinstalling nss... [ 9s] [40/41] preinstalling libsoftokn3... [ 9s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/109] installing libmagic-data-5.39-4.96 [ 10s] [2/109] installing setup-0.9-4.26 [ 10s] warning: /etc/profile created as /etc/profile.rpmnew [ 10s] [3/109] installing filesystem-3.1-3.3 [ 10s] [4/109] installing glibc-2.30-6.14 [ 11s] [5/109] installing libatomic-9.2.0-8.13 [ 11s] [6/109] installing libgcc-9.2.0-8.13 [ 12s] [7/109] installing libzstd1-1.4.5-1.69 [ 12s] [8/109] installing bash-3.2.57-4.4 [ 13s] [9/109] installing cpio-2.8-5.2 [ 13s] [10/109] installing diffutils-3.3-4.2 [ 13s] [11/109] installing findutils-4.3.8-3.167 [ 13s] [12/109] installing gdbm-1.8.3-3.190 [ 13s] [13/109] installing hostname-3.23-3.2 [ 13s] [14/109] installing libattr-2.4.48-4.113 [ 13s] [15/109] installing libblkid-2.36-7.18 [ 14s] [16/109] installing libbz2-1.0.8-4.129 [ 14s] [17/109] installing libcap-2.24-3.175 [ 14s] [18/109] installing libcares-1.17.1-7.2 [ 15s] [19/109] installing libext2fs-1.46.0-4.4 [ 15s] [20/109] installing libfreebl3-3.34.1-3.136 [ 15s] [21/109] installing libgfortran-9.2.0-8.13 [ 15s] [22/109] installing libgomp-9.2.0-8.13 [ 16s] [23/109] installing libitm-9.2.0-8.13 [ 16s] [24/109] installing libltdl-2.4.2-3.138 [ 16s] [25/109] installing liblua-5.1.5-3.128 [ 17s] [26/109] installing liblzma-5.2.5-4.54 [ 17s] [27/109] installing libopenssl11-1.1.1i-4.18 [ 18s] [28/109] installing libpcre-8.44-4.17 [ 18s] [29/109] installing libpopt-1.16-3.174 [ 18s] [30/109] installing libpython-2.7.18-4.40 [ 19s] [31/109] installing libsmack-1.3.1-3.170 [ 19s] [32/109] installing libsmartcols-2.36-7.18 [ 19s] [33/109] installing libsqlite-3.33.0-4.98 [ 19s] [34/109] installing libstdc++-9.2.0-8.13 [ 20s] [35/109] installing libuuid-2.36-7.18 [ 20s] [36/109] installing m4-1.4.17-3.2 [ 20s] [37/109] installing net-tools-2.0_20121208git-4.3 [ 20s] [38/109] installing nghttp2-1.41.0-13.4 [ 20s] [39/109] installing nspr-4.12-3.174 [ 21s] [40/109] installing patch-2.7-3.166 [ 21s] [41/109] installing pkg-config-0.28-3.166 [ 21s] [42/109] installing sed-4.1c-3.3 [ 21s] [43/109] installing update-alternatives-1.20.5-3.3 [ 21s] [44/109] installing which-2.17-4.3 [ 21s] [45/109] installing zlib-1.2.11-3.178 [ 21s] [46/109] installing build-compare-2015.04.28-3.65 [ 21s] [47/109] installing libstdc++-devel-9.2.0-8.13 [ 22s] [48/109] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 25s] [49/109] installing terminfo-base-full-6.2-5.88 [ 25s] [50/109] installing cpp-9.2.0-8.13 [ 26s] [51/109] installing gcc-c++-9.2.0-8.13 [ 27s] [52/109] installing binutils-2.33.1-7.74 [ 27s] [53/109] installing coreutils-6.9-4.47 [ 27s] [54/109] installing db4-4.8.30.NC-3.171 [ 28s] [55/109] installing gawk-3.1.5-4.3 [ 28s] [56/109] installing grep-2.5.2-3.3 [ 28s] [57/109] installing libacl-2.2.53-4.113 [ 28s] [58/109] installing libcc1-9.2.0-8.13 [ 28s] [59/109] installing libelf-0.178-3.90 [ 28s] [60/109] installing libmount-2.36-7.18 [ 29s] [61/109] installing libubsan-9.2.0-8.13 [ 29s] [62/109] installing make-4.0-2.45 [ 29s] [63/109] installing nss-certs-3.34.1-3.136 [ 29s] [64/109] installing smack-1.3.1-3.170 [ 29s] [65/109] installing bzip2-1.0.8-4.129 [ 29s] [66/109] installing libfdisk-2.36-7.18 [ 30s] [67/109] installing libicu-67.1-16.4 [ 43s] [68/109] installing libmagic-5.39-4.96 [ 43s] [69/109] installing libxml2-2.9.10-4.12 [ 43s] [70/109] installing perl-5.32.0-4.46 [ 47s] [71/109] installing xz-5.2.5-4.54 [ 47s] [72/109] installing build-mkbaselibs-20120927-3.3 [ 47s] [73/109] installing linux-glibc-devel-3.10-4.17 [ 48s] [74/109] installing autoconf-2.69-3.105 [ 48s] [75/109] installing file-5.39-4.96 [ 48s] [76/109] installing glibc-locale-2.30-6.14 [ 49s] [77/109] installing tar-1.17-2.5 [ 49s] [78/109] installing gzip-1.3.12-3.175 [ 49s] [79/109] installing libncurses6-6.2-5.88 [ 49s] [80/109] installing pam-1.1.6-3.3 [ 50s] [81/109] installing tzdata-2020a-3.3 [ 50s] [82/109] installing libdw-0.178-3.90 [ 50s] [83/109] installing libcurl-7.73.0-24.3 [ 51s] [84/109] installing libcurl-extension-dlp-7.73.0-24.3 [ 51s] [85/109] installing libarchive-3.5.1-2.15 [ 51s] [86/109] installing gcc-9.2.0-8.13 [ 52s] [87/109] installing libncurses-6.2-5.88 [ 52s] [88/109] installing glibc-devel-2.30-6.14 [ 52s] [89/109] installing qemu-accel-x86_64-armv7l-0.4-5.8 [ 59s] [90/109] installing automake-1.15.1-3.123 [ 59s] [91/109] installing less-466-3.3 [ 59s] [92/109] installing libreadline-5.2-3.46 [ 59s] [93/109] installing procps-ng-3.3.16-3.3 [ 60s] [94/109] installing libasm-0.178-3.90 [ 60s] [95/109] installing libcurl-devel-7.73.0-24.3 [ 60s] [96/109] installing build-20120927-3.3 [ 61s] [97/109] installing libcares-devel-1.17.1-7.2 [ 61s] [98/109] installing zlib-devel-1.2.11-3.178 [ 61s] [99/109] installing libtool-2.4.2-3.138 [ 61s] [100/109] installing elfutils-0.178-3.90 [ 61s] [101/109] installing python-2.7.18-4.40 [ 62s] [102/109] installing util-linux-2.36-7.18 [ 62s] [103/109] installing libopenssl1.1-devel-1.1.1i-4.18 [ 62s] [104/109] installing util-linux-su-2.36-7.18 [ 62s] [105/109] installing python-devel-2.7.18-4.40 [ 63s] [106/109] installing nss-3.34.1-3.136 [ 63s] [107/109] installing libsoftokn3-3.34.1-3.136 [ 64s] [108/109] installing rpm-4.14.1.1-7.4 [ 64s] [109/109] installing rpm-build-4.14.1.1-7.4 [ 64s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 64s] now finalizing build dir... [ 64s] Running build time source services... [ 65s] Warning: spec file parser line 59: can't expand %(...) [ 65s] Warning: spec file parser line 60: can't expand %(...) [ 65s] build target is armv7l-tizen-linux [ 65s] ----------------------------------------------------------------- [ 65s] I have the following modifications for python-pycurl.spec: [ 65s] 6c6 [ 65s] < Release: 0 [ 65s] --- [ 65s] > Release: 2.11 [ 65s] 60a61 [ 65s] > %changelog [ 65s] ----------------------------------------------------------------- [ 65s] ----- building python-pycurl.spec (user abuild) [ 65s] ----------------------------------------------------------------- [ 65s] ----------------------------------------------------------------- [ 65s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/36fe7d4dc38bb3e63fec5000957778f7-python-pycurl' -ba /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 65s] Building target platforms: armv7l-tizen-linux [ 65s] Building for target armv7l-tizen-linux [ 65s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.QggqGx [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + rm -rf pycurl-7.19.0 [ 65s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pycurl-7.19.0.tar.gz [ 65s] + /bin/tar -xof - [ 65s] + STATUS=0 [ 65s] + '[' 0 -ne 0 ']' [ 65s] + cd pycurl-7.19.0 [ 65s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 65s] + echo 'Patch #0 (0001-Don-t-build-static-libs.patch):' [ 65s] Patch #0 (0001-Don-t-build-static-libs.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file setup.py [ 65s] + echo 'Patch #1 (0002-Link-with-libcrypto.patch):' [ 65s] Patch #1 (0002-Link-with-libcrypto.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file setup.py [ 65s] + echo 'Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch):' [ 65s] Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch): [ 65s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 65s] patching file src/pycurl.c [ 65s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 65s] + exit 0 [ 65s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QIUPnv [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd pycurl-7.19.0 [ 65s] ++ uname -m [ 65s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 65s] + LANG=C [ 65s] + export LANG [ 65s] + unset DISPLAY [ 65s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 65s] + export CFLAGS [ 65s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 65s] + export CXXFLAGS [ 65s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 65s] + export FFLAGS [ 65s] + LDFLAGS= [ 65s] + export LDFLAGS [ 65s] + cp /home/abuild/rpmbuild/SOURCES/python-pycurl.manifest . [ 65s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL' [ 65s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL' [ 65s] + python setup.py build [ 66s] Using curl-config (libcurl 7.73.0) [ 66s] running build [ 66s] running build_py [ 66s] creating build [ 66s] creating build/lib.linux-armv7l-2.7 [ 66s] creating build/lib.linux-armv7l-2.7/curl [ 66s] copying python/curl/__init__.py -> build/lib.linux-armv7l-2.7/curl [ 66s] running build_ext [ 66s] building 'pycurl' extension [ 66s] creating build/temp.linux-armv7l-2.7 [ 66s] creating build/temp.linux-armv7l-2.7/src [ 66s] armv7l-tizen-linux-gnueabi-gcc -pthread -fno-strict-aliasing -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DNCURSES_INTERNALS -DNDEBUG -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-armv7l-2.7/src/pycurl.o [ 66s] src/pycurl.c: In function 'multi_socket_callback': [ 66s] src/pycurl.c:2351:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 66s] 2351 | int ret; [ 66s] | ^~~ [ 66s] src/pycurl.c: In function 'initpycurl': [ 66s] src/pycurl.c:3455:31: warning: passing argument 3 of 'insstr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 66s] 3455 | insstr(d, "COMPILE_DATE", COMPILE_DATE); [ 66s] | ^~~~~~~~~~~~ [ 66s] src/pycurl.c:3379:39: note: expected 'char *' but argument is of type 'const char *' [ 66s] 3379 | insstr(PyObject *d, char *name, char *value) [ 66s] | ~~~~~~^~~~~ [ 66s] At top level: [ 66s] src/pycurl.c:400:22: warning: 'pycurl_ssl_id' defined but not used [-Wunused-function] [ 66s] 400 | static unsigned long pycurl_ssl_id(void) [ 66s] | ^~~~~~~~~~~~~ [ 66s] src/pycurl.c:391:13: warning: 'pycurl_ssl_lock' defined but not used [-Wunused-function] [ 66s] 391 | static void pycurl_ssl_lock(int mode, int n, const char * file, int line) [ 66s] | ^~~~~~~~~~~~~~~ [ 67s] armv7l-tizen-linux-gnueabi-gcc -pthread -shared -Wl,-z,relro -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DHAVE_CURL_OPENSSL build/temp.linux-armv7l-2.7/src/pycurl.o -L/usr/lib -lcurl -lcrypto -lpython2.7 -o build/lib.linux-armv7l-2.7/pycurl.so [ 67s] + exit 0 [ 67s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0LM5Mw [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd pycurl-7.19.0 [ 67s] + LANG=C [ 67s] + export LANG [ 67s] + unset DISPLAY [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm [ 67s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm [ 67s] + python setup.py install -O1 --skip-build --root=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm --prefix=/usr [ 67s] Using curl-config (libcurl 7.73.0) [ 67s] running install [ 67s] running install_lib [ 67s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr [ 67s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib [ 67s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7 [ 67s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7/site-packages [ 67s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7/site-packages/curl [ 67s] copying build/lib.linux-armv7l-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7/site-packages/curl [ 68s] copying build/lib.linux-armv7l-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7/site-packages [ 68s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 68s] writing byte-compilation script '/tmp/tmpNss5eI.py' [ 68s] /bin/python -O /tmp/tmpNss5eI.py [ 68s] removing /tmp/tmpNss5eI.py [ 68s] running install_data [ 68s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share [ 68s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc [ 68s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl [ 68s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl [ 68s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl [ 68s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl [ 68s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl [ 68s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl [ 68s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl [ 68s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/html [ 68s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/html [ 68s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/html [ 68s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/html [ 68s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/html [ 68s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/html [ 68s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/examples [ 68s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/pycurl/tests [ 68s] running install_egg_info [ 68s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/info [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/packages [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/python-pycurl [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc/python-pycurl-7.19.0 [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/gtk-doc [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/doc [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/man [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm -regex '.*/man/man./.*.[0-9]' [ 68s] + xargs rm -f -- [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm -regex '.*/man/../man./.*.[0-9]' [ 68s] + xargs rm -f -- [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm -regex '.*/man/man./.*.[0-9]pm' [ 68s] + xargs rm -f -- [ 68s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 7.19.0-2.11 --unique-debug-src-base python-pycurl-7.19.0-2.11.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/pycurl-7.19.0 [ 68s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/lib/python2.7/site-packages/pycurl.so [ 68s] 246 blocks [ 68s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debuginfo.manifest [ 68s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debugsource.manifest [ 68s] + /usr/lib/rpm/check-buildroot [ 68s] + /usr/lib/rpm//brp-compress [ 68s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 68s] + /usr/lib/rpm/brp-python-hardlink [ 68s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm [ 68s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.Vem1sx [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd pycurl-7.19.0 [ 68s] + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 68s] + PYTHONPATH='/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 68s] + python tests/test_internals.py -q [ 69s] gc: collectable [ 69s] gc: collectable [ 69s] gc: collectable [ 69s] gc: collectable [ 69s] Python 2.7.18 (default, Mar 3 2021, 09:13:21) [ 69s] [GCC 9.2.0] [ 69s] PycURL libcurl/7.73.0 OpenSSL/1.1.1i zlib/1.2.11 c-ares/1.17.1 nghttp2/1.41.0 (compiled against 0x74900) [ 69s] PycURL version info (7, '7.73.0', 477440, 'armv7l-tizen-linux-gnueabi', 2745053, 'OpenSSL/1.1.1i', 0, '1.2.11', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'http', 'https', 'imap', 'imaps', 'mqtt', 'pop3', 'pop3s', 'rtsp', 'smb', 'smbs', 'smtp', 'smtps', 'telnet', 'tftp'), '1.17.1', 69889, None) [ 69s] build/lib.linux-armv7l-2.7/pycurl.so, compiled Mar 3 2021 12:07:17 [ 69s] All tests passed. [ 69s] + exit 0 [ 69s] Processing files: python-pycurl-7.19.0-2.11.armv7l [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.u4Wtqy [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd pycurl-7.19.0 [ 69s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/licenses/python-pycurl [ 69s] + export LC_ALL=C [ 69s] + LC_ALL=C [ 69s] + export LICENSEDIR [ 69s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/licenses/python-pycurl [ 69s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm/usr/share/licenses/python-pycurl [ 69s] + exit 0 [ 69s] Provides: pycurl = 7.19.0-2.11 python-pycurl = 7.19.0-2.11 python-pycurl(armv7l-32) = 7.19.0-2.11 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.4) libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) libpython2.7.so.1.0 python(abi) = 2.7 rtld(GNU_HASH) [ 69s] Processing files: python-pycurl-debugsource-7.19.0-2.11.armv7l [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: python-pycurl-debugsource = 7.19.0-2.11 python-pycurl-debugsource(armv7l-32) = 7.19.0-2.11 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Processing files: python-pycurl-debuginfo-7.19.0-2.11.armv7l [ 69s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 69s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 69s] [ 69s] Provides: python-pycurl-debuginfo = 7.19.0-2.11 python-pycurl-debuginfo(armv7l-32) = 7.19.0-2.11 [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Recommends: python-pycurl-debugsource(armv7l-32) = 7.19.0-2.11 [ 69s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm [ 69s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-2.11.src.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-2.11.armv7l.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-2.11.armv7l.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-2.11.armv7l.rpm [ 69s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.G6abEx [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd pycurl-7.19.0 [ 69s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-2.11.arm [ 69s] + exit 0 [ 69s] ... checking for files with abuild user/group [ 69s] ... creating baselibs [ 70s] ... comparing built packages with the former built [ 70s] /usr/lib/build/pkg-diff.sh [ 70s] compare /.build.oldpackages/python-pycurl-7.19.0-2.10.src.rpm /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-2.11.src.rpm [ 70s] This is not a prerelease project. Compare the project name. [ 70s] comparing rpmtags [ 70s] comparing RELEASE [ 70s] comparing PROVIDES [ 70s] comparing scripts [ 70s] comparing filelist [ 70s] comparing file checksum [ 70s] RPM meta information is identical [ 70s] compare /.build.oldpackages/python-pycurl-7.19.0-2.10.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-2.11.armv7l.rpm [ 70s] Comparing python-pycurl-7.19.0-2.10.armv7l.rpm to python-pycurl-7.19.0-2.11.armv7l.rpm [ 70s] This is not a prerelease project. Compare the project name. [ 70s] comparing rpmtags [ 70s] comparing RELEASE [ 70s] comparing PROVIDES [ 70s] comparing scripts [ 70s] comparing filelist [ 70s] comparing file checksum [ 70s] creating rename script [ 70s] RPM file checksum differs. [ 71s] Extracting packages [ 71s] /usr/lib/python2.7/site-packages/pycurl.so: only difference was in build-id or gnu_debuglink, GOOD. [ 71s] Package content is identical [ 71s] compare /.build.oldpackages/python-pycurl-debuginfo-7.19.0-2.10.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-2.11.armv7l.rpm [ 71s] skipping -debuginfo package [ 71s] compare /.build.oldpackages/python-pycurl-debugsource-7.19.0-2.10.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-2.11.armv7l.rpm [ 71s] Comparing python-pycurl-debugsource-7.19.0-2.10.armv7l.rpm to python-pycurl-debugsource-7.19.0-2.11.armv7l.rpm [ 71s] This is not a prerelease project. Compare the project name. [ 71s] comparing rpmtags [ 71s] comparing RELEASE [ 71s] comparing PROVIDES [ 71s] comparing scripts [ 71s] comparing filelist [ 71s] --- /tmp/tmp.noifk22298/tmp.aCtGC22395 2021-03-03 12:07:22.559397937 +0000 [ 71s] +++ /tmp/tmp.noifk22298/tmp.ybYyv22405 2021-03-03 12:07:22.567397887 +0000 [ 71s] @@ -1,2 +1,4 @@ [ 71s] /usr/src/debug/python-pycurl-@VERSION@-@RELEASE_LONG@.arm 0 (none) 40755 root root 0 4294967295 [ 71s] +/usr/src/debug/python-pycurl-@VERSION@-@RELEASE_LONG@.arm/src 0 (none) 40755 root root 0 4294967295 [ 71s] +/usr/src/debug/python-pycurl-@VERSION@-@RELEASE_LONG@.arm/src/pycurl.c 0 (none) 100644 root root 0 4294967295 [ 71s] [ 71s] RPM meta information is different [ 71s] [ 71s] obsnw03 finished "build python-pycurl.spec" at Wed Mar 3 12:07:22 UTC 2021. [ 71s] Retried build at Sun Mar 7 08:33:31 2021 returned same result, skipped Retried build at Sun Mar 7 15:52:14 2021 returned same result, skipped Retried build at Mon Mar 8 04:15:08 2021 returned same result, skipped Retried build at Mon Mar 8 05:40:47 2021 returned same result, skipped Retried build at Sun Mar 21 23:21:35 2021 returned same result, skipped Retried build at Wed Mar 24 16:30:10 2021 returned same result, skipped Retried build at Wed Mar 31 10:06:32 2021 returned same result, skipped Retried build at Fri Apr 2 04:36:15 2021 returned same result, skipped Retried build at Mon Apr 12 01:00:07 2021 returned same result, skipped Retried build at Fri Apr 30 05:31:38 2021 returned same result, skipped Retried build at Mon May 3 17:38:47 2021 returned same result, skipped Retried build at Wed May 26 09:31:40 2021 returned same result, skipped Retried build at Wed May 26 11:14:46 2021 returned same result, skipped Retried build at Thu May 27 08:31:01 2021 returned same result, skipped Retried build at Mon May 31 03:18:25 2021 returned same result, skipped Retried build at Mon May 31 11:26:44 2021 returned same result, skipped Retried build at Fri Jun 4 07:21:46 2021 returned same result, skipped Retried build at Thu Jun 24 09:59:31 2021 returned same result, skipped Retried build at Mon Jun 28 04:34:02 2021 returned same result, skipped Retried build at Mon Jun 28 11:06:43 2021 returned same result, skipped Retried build at Tue Jul 6 08:30:41 2021 returned same result, skipped Retried build at Tue Jul 6 21:05:15 2021 returned same result, skipped Retried build at Mon Jul 12 12:18:35 2021 returned same result, skipped Retried build at Thu Jul 15 09:49:59 2021 returned same result, skipped Retried build at Fri Jul 16 15:05:30 2021 returned same result, skipped Retried build at Mon Jul 19 01:30:37 2021 returned same result, skipped Retried build at Mon Sep 13 08:04:53 2021 returned same result, skipped