[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w03 started "build capi-network-serial.spec" at Thu Oct 10 22:29:45 UTC 2013. [ 0s] [ 0s] Building capi-network-serial for project 'Tizen:2.0:Panda' repository 'standard' arch 'armv7el' srcmd5 '043ff8bc73bab7d11de5a3b50dd868d6' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/capi-network-serial.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/capi-network-serial.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/capi-network-serial.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 3s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=unsafe -drive file=/srv/build/root_4/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_4/swap,if=virtio,cache=unsafe -smp 4 [ 6s]  [ 6s] Google, Inc. [ 6s] Serial Graphics Adapter 09/05/12 [ 6s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 6s] Term: 80x24 [ 6s] 4 0 [ 6s]  SeaBIOS (version 1.6.3-20120905_140109) [ 6s] [ 6s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[209]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 9433/2097152 files, 265069/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] /.build/build: line 770: mount: command not found [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/capi-network-serial.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/capi-network-serial.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 16s] [1/164] installing capi-base-common-0.1.0-12.3 [ 16s] [2/164] installing kernel-headers-2.6.36-5.1 [ 16s] [3/164] installing libX11-common-1.5.0-4.5 [ 16s] [4/164] installing tizen-release-2.0.0-2.4 [ 16s] [5/164] installing tzdata-2011h-4.2 [ 17s] [6/164] installing libgcc-4.5.3-5.1 [ 17s] [7/164] installing setup-0.1-5.1 [ 17s] [8/164] installing filesystem-0.1-5.1 [ 17s] warning: group lock does not exist - using root [ 17s] warning: group mail does not exist - using root [ 17s] [9/164] installing eglibc-2.13-5.1 [ 18s] [10/164] installing eglibc-common-2.13-5.1 [ 32s] [11/164] installing bash-4.1-6.3 [ 32s] [12/164] installing bzip2-libs-1.0.5-8.1 [ 32s] [13/164] installing cpio-2.8-7.1 [ 32s] [14/164] installing diffutils-3.0-6.2 [ 32s] [15/164] installing e2fsprogs-libs-1.41.11-3.3 [ 32s] [16/164] installing elfutils-libelf-0.152-5.1 [ 32s] [17/164] installing expat-2.0.1-12.1 [ 32s] [18/164] installing fdupes-1.40-46.1 [ 32s] [19/164] installing findutils-4.2.31-5.1 [ 32s] [20/164] installing gdbm-1.8.3-5.1 [ 32s] [21/164] installing libXau-1.0.7-3.4 [ 32s] [22/164] installing libattr-2.4.44-12.4 [ 33s] [23/164] installing libffi-3.0.9-102.4 [ 33s] [24/164] installing libgomp-4.5.3-5.1 [ 33s] [25/164] installing libidn-1.15-9.4 [ 33s] [26/164] installing liblua-5.1.4-9.3 [ 33s] [27/164] installing libstdc++-4.5.3-5.1 [ 34s] [28/164] installing libuuid-2.20.2-4.3 [ 34s] [29/164] installing lzo-2.03-5.1 [ 34s] [30/164] installing m4-1.4.14-5.1 [ 34s] [31/164] installing make-3.81-5.1 [ 34s] [32/164] installing net-tools-1.60-90.3 [ 34s] [33/164] installing nspr-4.8.7-4.4 [ 34s] [34/164] installing nss-softokn-freebl-3.12.9-6.4 [ 34s] [35/164] installing patch-2.6.1.169-5.1 [ 34s] [36/164] installing pkgconfig-0.25-6.1 [ 34s] [37/164] installing popt-1.16-6.3 [ 34s] [38/164] installing readline-5.2-17.4 [ 35s] [39/164] installing sed-4.1.5-5.2 [ 35s] [40/164] installing smack-1.0slp2+s7-2.3 [ 35s] [41/164] installing sqlite-3.7.9-4.4 [ 53s] [42/164] installing xz-libs-5.0.3-4.3 [ 53s] [43/164] installing zlib-1.2.5-6.3 [ 53s] [44/164] installing ncurses-libs-5.7-7.4 [ 53s] [45/164] installing build-compare-2009.10.14-30.1 [ 53s] [46/164] installing libstdc++-devel-4.5.3-5.1 [ 53s] [47/164] installing qemu.x86_64-1.2-2.3 [ 55s] [48/164] installing capi-base-common-devel-0.1.0-12.3 [ 55s] [49/164] installing eglibc-headers-2.13-5.1 [ 55s] [50/164] installing libcap-2.21-4.3 [ 56s] [51/164] installing unzip-6.0-12.4 [ 56s] [52/164] installing zlib-devel-1.2.5-6.3 [ 56s] [53/164] installing c-ares-1.7.4-6.1 [ 56s] [54/164] installing gmp-5.0.1-5.1 [ 56s] [55/164] installing libacl-2.2.49-4.3 [ 56s] [56/164] installing libdlog-0.4.1-7.5 [ 56s] [57/164] installing libfile-5.04-5.1 [ 56s] [58/164] installing libpcre-7.9-3.1 [ 56s] [59/164] installing libxcb-1.8.1-3.5 [ 57s] [60/164] installing libxml2-2.7.8-11.4 [ 57s] [61/164] installing lzo-minilzo-2.03-5.1 [ 57s] [62/164] installing ncurses-5.7-7.4 [ 57s] [63/164] installing openssl-1.0.1c-4.4 [ 57s] [64/164] installing binutils-2.21.51.20110421-6.1 [ 57s] [65/164] installing bzip2-1.0.5-8.1 [ 57s] [66/164] installing glib2-2.32.3-7.5 [ 58s] [67/164] installing libblkid-2.20.2-4.3 [ 58s] [68/164] installing xz-5.0.3-4.3 [ 58s] [69/164] installing elfutils-libs-0.152-5.1 [ 58s] [70/164] installing nss-3.12.9-6.4 [ 58s] [71/164] installing perl-5.12.1-63.1 [ 60s] [72/164] installing ncurses-base-5.7-7.4 [ 61s] [73/164] installing perl-HTML-Tagset-3.20-12.1 [ 61s] [74/164] installing perl-IO-Compress-Base-2.008-63.1 [ 61s] [75/164] installing perl-Module-Pluggable-3.60-63.1 [ 61s] [76/164] installing perl-Pod-Escapes-1.04-63.1 [ 61s] [77/164] installing perl-TimeDate-1.20-5.1 [ 61s] [78/164] installing eglibc-devel-2.13-5.1 [ 61s] [79/164] installing libdlog-devel-0.4.1-7.5 [ 61s] [80/164] installing grep-2.5.1a-65.2 [ 61s] [81/164] installing lzo-devel-2.03-5.1 [ 61s] [82/164] installing mpfr-3.0.0-4.4 [ 61s] [83/164] installing perl-Compress-Raw-Zlib-2.008-63.1 [ 61s] [84/164] installing perl-devel-5.12.1-63.1 [ 62s] [85/164] installing perl-libs-5.12.1-63.1 [ 62s] [86/164] installing tar-1.17-7.1 [ 62s] [87/164] installing coreutils-6.9-13.1 [ 62s] [88/164] installing file-5.04-5.1 [ 62s] [89/164] installing libX11-1.5.0-4.5 [ 62s] [90/164] installing libmount-2.20.2-4.3 [ 62s] [91/164] installing xz-lzma-compat-5.0.3-4.3 [ 62s] [92/164] installing elfutils-0.152-5.1 [ 62s] [93/164] installing nss-sysinit-3.12.9-6.4 [ 63s] [94/164] installing libcurl-7.21.3-8.4 [ 63s] [95/164] installing libarchive-2.8.3-4.3 [ 63s] [96/164] installing perl-ExtUtils-ParseXS-2.18-63.1 [ 63s] [97/164] installing perl-Pod-Simple-3.07-63.1 [ 63s] [98/164] installing perl-Test-Simple-0.80-63.1 [ 63s] [99/164] installing tizen-accelerator-1.0.1-5.1 [ 63s] [100/164] installing perl-IO-Compress-Zlib-2.008-63.1 [ 63s] [101/164] installing perl-Test-Harness-3.12-63.1 [ 63s] [102/164] installing gawk-3.1.5-4.4 [ 64s] [103/164] installing gzip-1.3.14-6.1 [ 64s] [104/164] installing mpc-0.9-5.4 [ 64s] [105/164] installing build-2011.01.10a-5.1 [ 64s] [106/164] installing curl-7.21.3-8.4 [ 64s] [107/164] installing dbus-1.6.4-7.1 [ 64s] warning: group dbus does not exist - using root [ 64s] [108/164] installing util-linux-2.20.2-4.3 [ 64s] warning: group tty does not exist - using root [ 64s] /bin/chown: `root:root': invalid user [ 64s] [109/164] installing cmake-2.8.5-4.4 [ 65s] [110/164] installing glib2-devel-2.32.3-7.5 [ 65s] [111/164] installing bzip2-libs-x86-arm-1.0.5-8.4 [ 66s] [112/164] installing dbus-libs-1.6.4-7.1 [ 66s] [113/164] installing eglibc-x86-arm-2.13-8.5 [ 67s] [114/164] installing elfutils-libelf-x86-arm-0.152-8.4 [ 67s] [115/164] installing elfutils-libs-x86-arm-0.152-8.7 [ 67s] [116/164] installing gmp-x86-arm-5.0.1-8.4 [ 67s] [117/164] installing libacl-x86-arm-2.2.49-8.4 [ 67s] [118/164] installing libattr-x86-arm-2.4.44-8.4 [ 68s] [119/164] installing libcap-x86-arm-2.21-8.4 [ 68s] [120/164] installing libfile-x86-arm-5.04-8.4 [ 68s] [121/164] installing libgcc-x86-arm-4.5.3-8.4 [ 68s] [122/164] installing liblua-x86-arm-5.1.4-8.4 [ 68s] [123/164] installing mpc-x86-arm-0.9-8.4 [ 69s] [124/164] installing mpfr-x86-arm-3.0.0-8.4 [ 69s] [125/164] installing ncurses-libs-x86-arm-5.7-8.4 [ 69s] [126/164] installing nspr-x86-arm-4.8.7-8.7 [ 69s] [127/164] installing nss-softokn-freebl-x86-arm-3.12.9-8.7 [ 69s] [128/164] installing nss-x86-arm-3.12.9-8.7 [ 70s] [129/164] installing perl-ExtUtils-MakeMaker-6.36-63.1 [ 70s] [130/164] installing popt-x86-arm-1.16-8.4 [ 70s] [131/164] installing sqlite-x86-arm-3.7.13-8.4 [ 70s] [132/164] installing xz-libs-x86-arm-5.0.3-8.4 [ 70s] [133/164] installing zlib-x86-arm-1.2.5-8.4 [ 70s] [134/164] installing cpp-4.5.3-5.1 [ 71s] [135/164] installing rpm-4.9.1-7.4 [ 73s] [136/164] installing dbus-devel-1.6.4-7.1 [ 73s] [137/164] installing perl-CPAN-1.9205-63.1 [ 73s] [138/164] installing bash-x86-arm-4.1-8.2 [ 74s] [139/164] installing dbus-glib-0.100-6.1 [ 74s] [140/164] installing fdupes-x86-arm-1.40-8.4 [ 74s] [141/164] installing findutils-x86-arm-4.2.31-8.4 [ 74s] [142/164] installing gawk-x86-arm-3.1.5-8.4 [ 74s] [143/164] installing gzip-x86-arm-1.3.14-8.4 [ 74s] [144/164] installing make-x86-arm-3.81-8.4 [ 75s] [145/164] installing patch-x86-arm-2.6.1.169-8.2 [ 75s] [146/164] installing sed-x86-arm-4.1.5-8.4 [ 75s] [147/164] installing diffutils-x86-arm-3.0-8.4 [ 75s] [148/164] installing autoconf-2.68-5.1 [ 75s] [149/164] installing coreutils-x86-arm-6.9-8.4 [ 78s] [150/164] installing file-x86-arm-5.04-8.4 [ 78s] [151/164] installing tar-x86-arm-1.17-8.4 [ 78s] [152/164] installing elfutils-x86-arm-0.152-8.7 [ 78s] [153/164] installing gcc-4.5.3-5.1 [ 79s] [154/164] installing rpm-libs-4.9.1-7.4 [ 79s] [155/164] installing rpm-libs-x86-arm-4.9.1-8.4 [ 79s] [156/164] installing automake-1.11.1-7.1 [ 79s] [157/164] installing dbus-glib-devel-0.100-6.1 [ 79s] [158/164] installing gcc-c++-4.5.3-5.1 [ 79s] [159/164] installing rpm-build-4.9.1-7.4 [ 79s] [160/164] installing libtool-2.2.6b-4.4 [ 80s] [161/164] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 82s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 82s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 82s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 82s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 82s] [162/164] installing rpm-x86-arm-4.9.1-8.4 [ 83s] /bin/rpm.orig-arm already present - skipping. [ 83s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 83s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 83s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 83s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 83s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 83s] [163/164] installing rpm-build-x86-arm-4.9.1-8.4 [ 83s] [164/164] installing cross-armv7l-binutils-accel-armv7l-2.22-1.3 [ 83s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 83s] now finalizing build dir... [ 83s] /.build/build: line 2585: mount: command not found [ 83s] /.build/build: line 2586: mount: command not found [ 84s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 86s] build target is armv7l-tizen-linux [ 86s] ----------------------------------------------------------------- [ 86s] I have the following modifications for capi-network-serial.spec: [ 86s] 4c4 [ 86s] < Release: 0 [ 86s] --- [ 86s] > Release: 5.4 [ 86s] ----------------------------------------------------------------- [ 86s] ----- building capi-network-serial.spec (user abuild) [ 86s] ----------------------------------------------------------------- [ 86s] ----------------------------------------------------------------- [ 86s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w03.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial' /home/abuild/rpmbuild/SOURCES/capi-network-serial.spec [ 87s] Building target platforms: armv7l-tizen-linux [ 87s] Building for target armv7l-tizen-linux [ 87s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.gUiL4g [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + rm -rf capi-network-serial-0.0.7 [ 87s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-network-serial-0.0.7.tar.gz [ 87s] + /bin/tar -xf - [ 87s] + STATUS=0 [ 87s] + '[' 0 -ne 0 ']' [ 87s] + cd capi-network-serial-0.0.7 [ 87s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 87s] + exit 0 [ 87s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qSVmog [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + cd capi-network-serial-0.0.7 [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 87s] + export CFLAGS [ 87s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 87s] + export CXXFLAGS [ 87s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 87s] + export FFLAGS [ 87s] + LD_AS_NEEDED=1 [ 87s] + export LD_AS_NEEDED [ 87s] ++ awk 'BEGIN {FS="."}{print $1}' [ 87s] ++ echo 0.0.7 [ 87s] + MAJORVER=0 [ 87s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.0.7 -DMAJORVER=0 [ 87s] -- The C compiler identification is GNU [ 87s] -- The CXX compiler identification is GNU [ 87s] -- Check for working C compiler: /usr/bin/gcc [ 87s] -- Check for working C compiler: /usr/bin/gcc -- works [ 87s] -- Detecting C compiler ABI info [ 88s] -- Detecting C compiler ABI info - done [ 88s] -- Check for working CXX compiler: /usr/bin/c++ [ 88s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 88s] -- Detecting CXX compiler ABI info [ 89s] -- Detecting CXX compiler ABI info - done [ 89s] -- checking for module 'dlog glib-2.0 capi-base-common dbus-glib-1' [ 89s] -- found dlog glib-2.0 capi-base-common dbus-glib-1, version 1.0;2.32.3;0.0.1;0.100 [ 90s] -- Configuring done [ 90s] -- Generating done [ 90s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 [ 90s] + make -j4 [ 90s] Scanning dependencies of target capi-network-serial [ 90s] [100%] Building C object CMakeFiles/capi-network-serial.dir/src/serial.c.o [ 90s] Linking C shared library libcapi-network-serial.so [ 91s] [100%] Built target capi-network-serial [ 91s] + exit 0 [ 91s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.y58qav [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd capi-network-serial-0.0.7 [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm [ 91s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm [ 91s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm install [ 91s] [100%] Built target capi-network-serial [ 91s] Install the project... [ 91s] -- Install configuration: "" [ 91s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/lib/libcapi-network-serial.so.0.0.7 [ 91s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/lib/libcapi-network-serial.so.0 [ 91s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/lib/libcapi-network-serial.so [ 91s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/include/network [ 91s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/include/network/serial.h [ 91s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/lib/pkgconfig/capi-network-serial.pc [ 91s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/share/info/dir [ 91s] + xargs rm -f -- [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm -regex '.*\.la$' [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm -regex '.*\.a$' [ 91s] + xargs rm -f -- [ 91s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm/usr/lib/libcapi-network-serial.so.0.0.7 [ 91s] symlinked /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.0.7.debug to /usr/lib/debug/usr/lib/libcapi-network-serial.so.debug [ 91s] symlinked /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.0.7.debug to /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.debug [ 91s] 38 blocks [ 91s] + /usr/lib/rpm/check-buildroot [ 91s] + /usr/lib/rpm//brp-compress [ 91s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 91s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 92s] + /usr/lib/rpm/brp-python-bytecompile [ 92s] + /usr/lib/rpm/brp-python-hardlink [ 92s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm [ 92s] Processing files: capi-network-serial-0.0.7-5.4.armv7l [ 92s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 92s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 92s] [ 92s] Provides: libcapi-network-serial.so.0 [ 92s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 92s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 92s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 92s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 92s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-glib-1.so.2 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) [ 92s] Processing files: capi-network-serial-devel-0.0.7-5.4.armv7l [ 92s] Provides: pkgconfig(capi-network-serial) [ 92s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 92s] Requires: /usr/bin/pkg-config libcapi-network-serial.so.0 pkgconfig(capi-base-common) [ 92s] Processing files: capi-network-serial-debuginfo-0.0.7-5.4.armv7l [ 92s] Processing files: capi-network-serial-debugsource-0.0.7-5.4.armv7l [ 92s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm [ 92s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.7-5.4.src.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-0.0.7-5.4.armv7l.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-devel-0.0.7-5.4.armv7l.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debuginfo-0.0.7-5.4.armv7l.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debugsource-0.0.7-5.4.armv7l.rpm [ 92s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.4lhm1j [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd capi-network-serial-0.0.7 [ 92s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-5.4.arm [ 92s] + exit 0 [ 92s] ... checking for files with abuild user/group [ 92s] ... creating baselibs [ 93s] ... comparing built packages with the former built [ 93s] /usr/lib/build/rpm-check.sh [ 93s] compare /.build.oldpackages/capi-network-serial-0.0.7-5.3.src.rpm /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.7-5.4.src.rpm [ 93s] compare /.build.oldpackages/capi-network-serial-0.0.7-5.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-0.0.7-5.4.armv7l.rpm [ 93s] --- /tmp/tmp.qtipMO6zST 2013-10-10 22:31:17.251613284 +0000 [ 93s] +++ /tmp/tmp.2PxxMryxHd 2013-10-10 22:31:17.263613284 +0000 [ 93s] @@ -1,7 +1,7 @@ [ 93s] capi-network-serial 0.0.7 (none) [ 93s] Network Serial Framework [ 93s] Network Serial Framework [ 93s] - tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] + tizen Tizen:2.0:Panda obs://w03.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] TO_BE/FILLED_IN (none) (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/capi-network-serial-debuginfo-0.0.7-5.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debuginfo-0.0.7-5.4.armv7l.rpm [ 93s] --- /tmp/tmp.mAMtuNiqIs 2013-10-10 22:31:17.307613284 +0000 [ 93s] +++ /tmp/tmp.pbBPHKXl59 2013-10-10 22:31:17.327613283 +0000 [ 93s] @@ -3,7 +3,7 @@ [ 93s] This package provides debug information for package capi-network-serial. [ 93s] Debug information is useful when developing applications that use this [ 93s] package or when debugging this package. [ 93s] - tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] + tizen Tizen:2.0:Panda obs://w03.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] Development/Debug (none) (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/capi-network-serial-debugsource-0.0.7-5.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debugsource-0.0.7-5.4.armv7l.rpm [ 93s] --- /tmp/tmp.lfEx3o8kBU 2013-10-10 22:31:17.371613284 +0000 [ 93s] +++ /tmp/tmp.9dw19hNKMw 2013-10-10 22:31:17.383613284 +0000 [ 93s] @@ -3,7 +3,7 @@ [ 93s] This package provides debug sources for package capi-network-serial. [ 93s] Debug sources are useful when developing applications that use this [ 93s] package or when debugging this package. [ 93s] - tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] + tizen Tizen:2.0:Panda obs://w03.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] Development/Debug (none) (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/capi-network-serial-devel-0.0.7-5.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-devel-0.0.7-5.4.armv7l.rpm [ 93s] --- /tmp/tmp.ZtxVpL606r 2013-10-10 22:31:17.435613284 +0000 [ 93s] +++ /tmp/tmp.rFsQFusIFF 2013-10-10 22:31:17.451613283 +0000 [ 93s] @@ -1,7 +1,7 @@ [ 93s] capi-network-serial-devel 0.0.7 (none) [ 93s] Network Serial Framework (DEV) [ 93s] Network Serial Framework (DEV). [ 93s] - tizen Tizen:2.0:Panda obs://w11.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] + tizen Tizen:2.0:Panda obs://w03.vlan200.tizen.org/Tizen:2.0:Panda/standard/043ff8bc73bab7d11de5a3b50dd868d6-capi-network-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 93s] TO_BE/FILLED (none) (none) (none) (none) [ 93s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 93s] cpio gzip 9 [ 93s] RPM meta information is different [ 93s] ... saving built statistics [ 93s] /.build/build: line 3144: mount: command not found [ 93s] ERROR: no root disk device found, yet another new device name? [ 93s] ls: cannot access /sys/block/: No such file or directory [ 93s] umount: /sys: not mounted [ 93s] ... saving built packages [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-0.0.7-5.4.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debuginfo-0.0.7-5.4.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-debugsource-0.0.7-5.4.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-serial-devel-0.0.7-5.4.armv7l.rpm [ 93s] /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.7-5.4.src.rpm [ 93s] /home/abuild/rpmbuild/OTHER/_statistics [ 93s] [ 93s] w03 finished "build capi-network-serial.spec" at Thu Oct 10 22:31:17 UTC 2013. [ 93s] [ 94s] /.build/build: line 391: mount: command not found [ 94s] /.build/build: line 368: 298 Killed background_monitor_process [ 96s] Warning: VM doesn't support sysrq and /sbin/halt not installed [ 96s] Warning: clean shut down of the VM didn't work [ 97s] [ 89.096121] Kernel panic - not syncing: Attempted to kill init! [ 97s] [ 89.096852] Pid: 1, comm: qemu-arm Not tainted 3.1.9-1.4-default #1 [ 97s] [ 89.097447] Call Trace: [ 97s] [ 89.097635] [] dump_trace+0x9a/0x270 [ 97s] [ 89.098014] [] dump_stack+0x69/0x6f [ 97s] [ 89.098382] [] panic+0x95/0x1a9 [ 97s] [ 89.098730] [] forget_original_parent+0x244/0x250 [ 97s] [ 89.099201] [] exit_notify+0x10/0x160 [ 97s] [ 89.099601] [] do_exit+0x1dd/0x410 [ 97s] [ 89.100043] [] do_group_exit+0x41/0xb0 [ 97s] [ 89.100584] [] sys_exit_group+0x12/0x20 [ 97s] [ 89.101046] [] system_call_fastpath+0x16/0x1b [ 97s] [ 89.101504] [<00000000601208d9>] 0x601208d8 [ 98s] [ 89.101957] Rebooting in 1 seconds..build: extracting built packages... [ 98s] capi-network-serial-0.0.7-5.4.armv7l.rpm [ 98s] capi-network-serial-debuginfo-0.0.7-5.4.armv7l.rpm [ 98s] capi-network-serial-debugsource-0.0.7-5.4.armv7l.rpm [ 98s] capi-network-serial-devel-0.0.7-5.4.armv7l.rpm [ 98s] capi-network-serial-0.0.7-5.4.src.rpm [ 98s] _statistics