[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w09 started "build capi-system-accessory.spec" at Thu Oct 10 22:44:08 UTC 2013. [ 0s] [ 0s] Building capi-system-usb-accessory for project 'Tizen:2.0:Panda' repository 'standard' arch 'armv7el' srcmd5 '709af40b837d93711b3d9fed6c6c2714' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/capi-system-accessory.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/capi-system-accessory.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/capi-system-accessory.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 2s] [6/56] preinstalling bash... [ 2s] [7/56] preinstalling bzip2-libs... [ 2s] [8/56] preinstalling diffutils... [ 2s] [9/56] preinstalling elfutils-libelf... [ 2s] [10/56] preinstalling libattr... [ 2s] [11/56] preinstalling liblua... [ 2s] [12/56] preinstalling libstdc++... [ 2s] [13/56] preinstalling ncurses-libs... [ 2s] [14/56] preinstalling nspr... [ 2s] [15/56] preinstalling nss-softokn-freebl... [ 2s] [16/56] preinstalling popt... [ 2s] [17/56] preinstalling readline... [ 2s] [18/56] preinstalling sed... [ 2s] [19/56] preinstalling sqlite... [ 2s] [20/56] preinstalling xz-libs... [ 2s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 3s] [23/56] preinstalling libcap... [ 3s] [24/56] preinstalling libacl... [ 3s] [25/56] preinstalling libfile... [ 3s] [26/56] preinstalling bzip2... [ 3s] [27/56] preinstalling nss... [ 3s] [28/56] preinstalling tar... [ 3s] [29/56] preinstalling coreutils... [ 3s] [30/56] preinstalling file... [ 3s] [31/56] preinstalling rpm... [ 3s] [32/56] preinstalling tizen-accelerator... [ 3s] [33/56] preinstalling rpm-libs... [ 3s] [34/56] preinstalling gmp-x86-arm... [ 3s] [35/56] preinstalling mpc-x86-arm... [ 3s] [36/56] preinstalling mpfr-x86-arm... [ 3s] [37/56] preinstalling bzip2-libs-x86-arm... [ 3s] [38/56] preinstalling eglibc-x86-arm... [ 3s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 3s] [40/56] preinstalling libacl-x86-arm... [ 3s] [41/56] preinstalling libattr-x86-arm... [ 3s] [42/56] preinstalling libcap-x86-arm... [ 3s] [43/56] preinstalling libfile-x86-arm... [ 3s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 4s] [4/8] preinstalling grep... [ 4s] [5/8] preinstalling libblkid... [ 4s] [6/8] preinstalling util-linux... [ 4s] [7/8] preinstalling perl-libs... [ 4s] [8/8] preinstalling perl... [ 4s] copying packages... [ 5s] reordering...cycle: bash -> eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> bash [ 5s] cycle: eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> libgcc [ 5s] breaking dependency eglibc -> eglibc-common [ 5s] cycle: eglibc -> libgcc [ 5s] breaking dependency libgcc -> eglibc [ 5s] cycle: filesystem -> setup [ 5s] breaking dependency setup -> filesystem [ 5s] cycle: ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses [ 5s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses-base [ 5s] cycle: perl -> perl-libs [ 5s] breaking dependency perl -> perl-libs [ 5s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 5s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl -> perl-IO-Compress-Zlib [ 5s] breaking dependency perl -> perl-IO-Compress-Zlib [ 5s] cycle: perl -> perl-IO-Compress-Base [ 5s] breaking dependency perl -> perl-IO-Compress-Base [ 5s] cycle: perl -> perl-Module-Pluggable [ 5s] breaking dependency perl -> perl-Module-Pluggable [ 5s] cycle: perl -> perl-Pod-Simple [ 5s] breaking dependency perl -> perl-Pod-Simple [ 5s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 5s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 5s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 5s] cycle: dbus-libs -> dbus [ 5s] breaking dependency dbus -> dbus-libs [ 5s] cycle: systemd -> libudev -> udev [ 5s] breaking dependency systemd -> libudev [ 5s] cycle: nss -> nss-sysinit [ 5s] breaking dependency nss -> nss-sysinit [ 5s] cycle: perl-CPAN -> perl-Test-Harness [ 5s] breaking dependency perl-Test-Harness -> perl-CPAN [ 5s] cycle: rpm-libs -> rpm [ 5s] breaking dependency rpm -> rpm-libs [ 5s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 5s] breaking dependency pkgmgr-info-parser -> pkgmgr-info [ 5s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_1/root,if=virtio,cache=unsafe -drive file=/srv/build/root_1/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_1/swap,if=virtio,cache=unsafe -smp 4 [ 6s]  [ 6s] Google, Inc. [ 6s] Serial Graphics Adapter 09/05/12 [ 6s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 6s] Term: 80x24 [ 6s] 4 0 [ 6s]  SeaBIOS (version 1.6.3-20120905_140109) [ 6s] [ 6s] Booting from ROM... [ 9s] doing fast boot [ 9s] Creating device nodes with udev [ 9s] udevd[214]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 9s] [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.20.1 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 9556/2097152 files, 269259/8388608 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] /.build/build: line 770: mount: command not found [ 11s] swapon on /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/capi-system-accessory.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/capi-system-accessory.spec build rpmlint-Factory ... [ 12s] running rpm-x86-arm postinstall script [ 12s] running rpm-libs-x86-arm postinstall script [ 12s] running tizen-accelerator postinstall script [ 12s] running bash-x86-arm postinstall script [ 12s] initializing rpm db... [ 18s] [1/225] installing capi-base-common-0.1.0-12.3 [ 18s] [2/225] installing kernel-headers-2.6.36-5.1 [ 18s] [3/225] installing libX11-common-1.5.0-4.5 [ 18s] [4/225] installing opengl-es-virtual-drv-0.1.3-10.4 [ 18s] [5/225] installing tizen-release-2.0.0-2.4 [ 19s] [6/225] installing tzdata-2011h-4.2 [ 19s] [7/225] installing libgcc-4.5.3-5.1 [ 19s] [8/225] installing setup-0.1-5.1 [ 19s] [9/225] installing filesystem-0.1-5.1 [ 19s] warning: group lock does not exist - using root [ 19s] warning: group mail does not exist - using root [ 19s] [10/225] installing eglibc-2.13-5.1 [ 20s] [11/225] installing eglibc-common-2.13-5.1 [ 29s] [12/225] installing bash-4.1-6.3 [ 29s] [13/225] installing bzip2-libs-1.0.5-8.1 [ 29s] [14/225] installing cpio-2.8-7.1 [ 29s] [15/225] installing diffutils-3.0-6.2 [ 29s] [16/225] installing e2fsprogs-libs-1.41.11-3.3 [ 29s] [17/225] installing eina-1.7.1+svn.77445+build01r01-1.4 [ 29s] [18/225] installing elfutils-libelf-0.152-5.1 [ 29s] [19/225] installing expat-2.0.1-12.1 [ 29s] [20/225] installing fdupes-1.40-46.1 [ 30s] [21/225] installing findutils-4.2.31-5.1 [ 30s] [22/225] installing fribidi-0.19.5-7.4 [ 30s] [23/225] installing gdbm-1.8.3-5.1 [ 30s] [24/225] installing kmod-5-4.1 [ 30s] [25/225] installing libICE-1.0.8-3.5 [ 30s] [26/225] installing libXau-1.0.7-3.4 [ 30s] [27/225] installing libattr-2.4.44-12.4 [ 30s] [28/225] installing libdrm2-2.4.35-18.5 [ 30s] [29/225] installing libffi-3.0.9-102.4 [ 30s] [30/225] installing libgomp-4.5.3-5.1 [ 36s] [31/225] installing libidn-1.15-9.4 [ 36s] [32/225] installing libjpeg-turbo-1.2.0-10.4 [ 36s] [33/225] installing liblua-5.1.4-9.3 [ 36s] [34/225] installing libstdc++-4.5.3-5.1 [ 36s] [35/225] installing libuuid-2.20.2-4.3 [ 36s] [36/225] installing lzo-2.03-5.1 [ 36s] [37/225] installing m4-1.4.14-5.1 [ 36s] [38/225] installing make-3.81-5.1 [ 36s] [39/225] installing net-tools-1.60-90.3 [ 37s] [40/225] installing nspr-4.8.7-4.4 [ 37s] [41/225] installing nss-softokn-freebl-3.12.9-6.4 [ 37s] [42/225] installing patch-2.6.1.169-5.1 [ 37s] [43/225] installing pixman-0.26.0-8.2 [ 37s] [44/225] installing pkgconfig-0.25-6.1 [ 37s] [45/225] installing popt-1.16-6.3 [ 37s] [46/225] installing readline-5.2-17.4 [ 37s] [47/225] installing sed-4.1.5-5.2 [ 37s] [48/225] installing smack-1.0slp2+s7-2.3 [ 37s] [49/225] installing sqlite-3.7.9-4.4 [ 38s] [50/225] installing xz-libs-5.0.3-4.3 [ 38s] [51/225] installing zlib-1.2.5-6.3 [ 38s] [52/225] installing ncurses-libs-5.7-7.4 [ 38s] [53/225] installing build-compare-2009.10.14-30.1 [ 38s] [54/225] installing libstdc++-devel-4.5.3-5.1 [ 38s] [55/225] installing qemu.x86_64-1.2-2.3 [ 39s] [56/225] installing vconf-internal-keys-devel-0.0.66-1.4 [ 39s] [57/225] installing capi-base-common-devel-0.1.0-12.3 [ 39s] [58/225] installing eglibc-headers-2.13-5.1 [ 40s] [59/225] installing libcap-2.21-4.3 [ 40s] [60/225] installing sqlite-devel-3.7.9-4.4 [ 40s] [61/225] installing unzip-6.0-12.4 [ 40s] [62/225] installing zlib-devel-1.2.5-6.3 [ 40s] [63/225] installing c-ares-1.7.4-6.1 [ 40s] [64/225] installing freetype-2.4.9-3.4 [ 40s] [65/225] installing gmp-5.0.1-5.1 [ 40s] [66/225] installing libacl-2.2.49-4.3 [ 40s] [67/225] installing libdlog-0.4.1-7.5 [ 40s] [68/225] installing libdrm-slp1-2.4.35-18.5 [ 41s] [69/225] installing libfile-5.04-5.1 [ 41s] [70/225] installing libpcre-7.9-3.1 [ 41s] [71/225] installing libpng-1.2.50-3.4 [ 41s] [72/225] installing libxcb-1.8.1-3.5 [ 41s] [73/225] installing libxml2-2.7.8-11.4 [ 41s] [74/225] installing lzo-minilzo-2.03-5.1 [ 41s] [75/225] installing ncurses-5.7-7.4 [ 41s] [76/225] installing openssl-1.0.1c-4.4 [ 42s] [77/225] installing binutils-2.21.51.20110421-6.1 [ 42s] [78/225] installing bzip2-1.0.5-8.1 [ 42s] [79/225] installing glib2-2.32.3-7.5 [ 42s] [80/225] installing libSM-1.2.1-3.5 [ 42s] [81/225] installing libblkid-2.20.2-4.3 [ 42s] [82/225] installing libicu-4.8-3.4 [ 43s] [83/225] installing libprivilege-control-0.0.19-1.4 [ 43s] ln: creating symbolic link `/lib/udev/rules.d/95-permissions-slp.rules': No such file or directory [ 43s] warning: %post(libprivilege-control-0.0.19-1.4.armv7l) scriptlet failed, exit status 1 [ 43s] [84/225] installing xz-5.0.3-4.3 [ 43s] [85/225] installing eet-1.7.1+svn.77495+build01r01-1.6 [ 43s] [86/225] installing elfutils-libs-0.152-5.1 [ 43s] [87/225] installing nss-3.12.9-6.4 [ 43s] [88/225] installing perl-5.12.1-63.1 [ 44s] [89/225] installing ncurses-base-5.7-7.4 [ 44s] [90/225] installing perl-HTML-Tagset-3.20-12.1 [ 44s] [91/225] installing perl-IO-Compress-Base-2.008-63.1 [ 44s] [92/225] installing perl-Module-Pluggable-3.60-63.1 [ 45s] [93/225] installing perl-Pod-Escapes-1.04-63.1 [ 45s] [94/225] installing perl-TimeDate-1.20-5.1 [ 45s] [95/225] installing eglibc-devel-2.13-5.1 [ 45s] [96/225] installing libdlog-devel-0.4.1-7.5 [ 45s] [97/225] installing libicu-devel-4.8-3.4 [ 45s] [98/225] installing grep-2.5.1a-65.2 [ 45s] [99/225] installing lzo-devel-2.03-5.1 [ 45s] [100/225] installing mpfr-3.0.0-4.4 [ 45s] [101/225] installing perl-Compress-Raw-Zlib-2.008-63.1 [ 45s] [102/225] installing perl-devel-5.12.1-63.1 [ 46s] [103/225] installing perl-libs-5.12.1-63.1 [ 46s] [104/225] installing tar-1.17-7.1 [ 46s] [105/225] installing bundle-0.1.27-1.4 [ 46s] [106/225] installing coreutils-6.9-13.1 [ 46s] [107/225] installing ecore-1.7.1+svn.77580+build01r01-1.4 [ 46s] [108/225] installing file-5.04-5.1 [ 46s] [109/225] installing libX11-1.5.0-4.5 [ 46s] [110/225] installing libmount-2.20.2-4.3 [ 46s] [111/225] installing xz-lzma-compat-5.0.3-4.3 [ 47s] [112/225] installing app-checker-0.0.16-3.5 [ 47s] [113/225] installing elfutils-0.152-5.1 [ 47s] [114/225] installing nss-sysinit-3.12.9-6.4 [ 47s] [115/225] installing libcurl-7.21.3-8.4 [ 47s] [116/225] installing libslp-db-util-0.1.1-7.3 [ 47s] [117/225] installing libarchive-2.8.3-4.3 [ 47s] [118/225] installing bundle-devel-0.1.27-1.4 [ 48s] [119/225] installing perl-ExtUtils-ParseXS-2.18-63.1 [ 48s] [120/225] installing perl-Pod-Simple-3.07-63.1 [ 48s] [121/225] installing perl-Test-Simple-0.80-63.1 [ 48s] [122/225] installing tizen-accelerator-1.0.1-5.1 [ 48s] [123/225] installing libXcomposite-0.4.3-5.3 [ 48s] [124/225] installing libXext-1.3.1-3.3 [ 48s] [125/225] installing libXfixes-5.0-4.3 [ 48s] [126/225] installing libXrender-0.9.7-3.3 [ 48s] [127/225] installing perl-IO-Compress-Zlib-2.008-63.1 [ 49s] [128/225] installing perl-Test-Harness-3.12-63.1 [ 49s] [129/225] installing gawk-3.1.5-4.4 [ 49s] [130/225] installing gzip-1.3.14-6.1 [ 49s] [131/225] installing mpc-0.9-5.4 [ 49s] [132/225] installing pam-1.1.5-6.1 [ 49s] [133/225] installing xdgmime-0.0.12-4.4 [ 49s] chown: `root:root': invalid user [ 49s] [134/225] installing app-checker-server-0.0.16-3.5 [ 49s] [135/225] installing build-2011.01.10a-5.1 [ 50s] [136/225] installing ecore-input-1.7.1+svn.77580+build01r01-1.4 [ 50s] [137/225] installing giflib-4.1.6-15.4 [ 50s] [138/225] installing curl-7.21.3-8.4 [ 50s] [139/225] installing dbus-1.6.4-7.1 [ 50s] warning: group dbus does not exist - using root [ 50s] [140/225] installing util-linux-2.20.2-4.3 [ 50s] warning: group tty does not exist - using root [ 50s] /bin/chown: `root:root': invalid user [ 50s] [141/225] installing app2sd-0.5-8.5 [ 50s] [142/225] installing fontconfig-2.9.0-4.5 [ 53s] [143/225] installing librua-0.1.0-36.3 [ 53s] persist [ 53s] /var/tmp/rpm-tmp.kuIy5t: line 9: chsmack: command not found [ 53s] /var/tmp/rpm-tmp.kuIy5t: line 10: chsmack: command not found [ 53s] warning: %post(librua-0.1.0-36.3.armv7l) scriptlet failed, exit status 127 [ 53s] [144/225] installing cmake-2.8.5-4.4 [ 53s] [145/225] installing glib2-devel-2.32.3-7.5 [ 54s] [146/225] installing xdgmime-devel-0.0.12-4.4 [ 54s] [147/225] installing bzip2-libs-x86-arm-1.0.5-8.4 [ 54s] [148/225] installing dbus-libs-1.6.4-7.1 [ 54s] [149/225] installing eglibc-x86-arm-2.13-8.5 [ 54s] [150/225] installing elfutils-libelf-x86-arm-0.152-8.4 [ 54s] [151/225] installing elfutils-libs-x86-arm-0.152-8.7 [ 55s] [152/225] installing gmp-x86-arm-5.0.1-8.4 [ 55s] [153/225] installing libacl-x86-arm-2.2.49-8.4 [ 55s] [154/225] installing libattr-x86-arm-2.4.44-8.4 [ 55s] [155/225] installing libcap-x86-arm-2.21-8.4 [ 55s] [156/225] installing libfile-x86-arm-5.04-8.4 [ 56s] [157/225] installing libgcc-x86-arm-4.5.3-8.4 [ 56s] [158/225] installing liblua-x86-arm-5.1.4-8.4 [ 56s] [159/225] installing mpc-x86-arm-0.9-8.4 [ 56s] [160/225] installing mpfr-x86-arm-3.0.0-8.4 [ 56s] [161/225] installing ncurses-libs-x86-arm-5.7-8.4 [ 57s] [162/225] installing nspr-x86-arm-4.8.7-8.7 [ 57s] [163/225] installing nss-softokn-freebl-x86-arm-3.12.9-8.7 [ 57s] [164/225] installing nss-x86-arm-3.12.9-8.7 [ 57s] [165/225] installing perl-ExtUtils-MakeMaker-6.36-63.1 [ 57s] [166/225] installing popt-x86-arm-1.16-8.4 [ 57s] [167/225] installing sqlite-x86-arm-3.7.13-8.4 [ 58s] [168/225] installing xz-libs-x86-arm-5.0.3-8.4 [ 58s] [169/225] installing zlib-x86-arm-1.2.5-8.4 [ 58s] [170/225] installing libXdamage-1.1.3-5.3 [ 58s] [171/225] installing libXgesture-0.1.0-3.3 [ 58s] [172/225] installing libXi-1.6.1-3.3 [ 58s] [173/225] installing libXinerama-1.1.2-3.2 [ 58s] [174/225] installing libXv-1.0.7-3.3 [ 59s] [175/225] installing libdri2-0.1.0-13.3 [ 59s] [176/225] installing libXcursor-1.1.13-3.3 [ 59s] [177/225] installing libXrandr-1.4.0-5.3 [ 59s] [178/225] installing libslp-db-util-devel-0.1.1-7.3 [ 59s] [179/225] installing cpp-4.5.3-5.1 [ 59s] [180/225] installing cairo-1.12.8-6.3 [ 59s] [181/225] installing rpm-4.9.1-7.4 [ 60s] [182/225] installing perl-CPAN-1.9205-63.1 [ 60s] [183/225] installing bash-x86-arm-4.1-8.2 [ 60s] [184/225] installing dbus-glib-0.100-6.1 [ 60s] [185/225] installing fdupes-x86-arm-1.40-8.4 [ 60s] [186/225] installing findutils-x86-arm-4.2.31-8.4 [ 60s] [187/225] installing gawk-x86-arm-3.1.5-8.4 [ 61s] [188/225] installing gzip-x86-arm-1.3.14-8.4 [ 61s] [189/225] installing make-x86-arm-3.81-8.4 [ 61s] [190/225] installing patch-x86-arm-2.6.1.169-8.2 [ 61s] [191/225] installing sed-x86-arm-4.1.5-8.4 [ 61s] [192/225] installing diffutils-x86-arm-3.0-8.4 [ 62s] [193/225] installing libXtst-1.2.0-5.3 [ 62s] [194/225] installing autoconf-2.68-5.1 [ 62s] [195/225] installing coreutils-x86-arm-6.9-8.4 [ 64s] [196/225] installing file-x86-arm-5.04-8.4 [ 64s] [197/225] installing tar-x86-arm-1.17-8.4 [ 65s] [198/225] installing harfbuzz-0.9.7-4.4 [ 65s] [199/225] installing elfutils-x86-arm-0.152-8.7 [ 65s] [200/225] installing systemd-43-4.6 [ 65s] [201/225] installing libslp-utilx-0.1.16-1.4 [ 65s] [202/225] installing gcc-4.5.3-5.1 [ 66s] [203/225] installing rpm-libs-4.9.1-7.4 [ 66s] [204/225] installing rpm-libs-x86-arm-4.9.1-8.4 [ 66s] [205/225] installing automake-1.11.1-7.1 [ 66s] [206/225] installing vconf-0.2.32-1.6 [ 66s] Failed to get D-Bus connection: No connection to service manager. [ 66s] warning: %post(vconf-0.2.32-1.6.armv7l) scriptlet failed, exit status 1 [ 66s] [207/225] installing udev-182-8.1 [ 66s] Failed to get D-Bus connection: No connection to service manager. [ 66s] Failed to get D-Bus connection: No connection to service manager. [ 66s] Failed to get D-Bus connection: No connection to service manager. [ 66s] Failed to get D-Bus connection: No connection to service manager. [ 66s] [208/225] installing gcc-c++-4.5.3-5.1 [ 66s] [209/225] installing evas-1.7.1+svn.77561+build01r01-1.6 [ 67s] [210/225] installing ecore-x-1.7.1+svn.77580+build01r01-1.4 [ 67s] [211/225] installing rpm-build-4.9.1-7.4 [ 67s] [212/225] installing vconf-keys-devel-0.2.32-1.6 [ 67s] [213/225] installing libudev-182-8.1 [ 67s] [214/225] installing libtool-2.2.6b-4.4 [ 67s] [215/225] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 68s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 68s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 68s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 68s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 68s] [216/225] installing ail-0.2.55-1.5 [ 68s] [AIL_INITDB][D][main,214] AIL_INITDB : 0 [ 68s] open log dev is failed [ 68s] [AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory [ 68s] [ 68s] [AIL_INITDB][E][main,224] cannot load opt desktop directory. [ 68s] /var/tmp/rpm-tmp.qUZ2oX: line 23: chsmack: command not found [ 68s] warning: %post(ail-0.2.55-1.5.armv7l) scriptlet failed, exit status 127 [ 68s] [217/225] installing pkgmgr-info-parser-0.0.54-1.2 [ 68s] [218/225] installing rpm-x86-arm-4.9.1-8.4 [ 68s] /bin/rpm.orig-arm already present - skipping. [ 68s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 68s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 68s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 68s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 68s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 68s] [219/225] installing rpm-build-x86-arm-4.9.1-8.4 [ 69s] [220/225] installing vconf-devel-0.2.32-1.6 [ 69s] [221/225] installing cross-armv7l-binutils-accel-armv7l-2.22-1.3 [ 69s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 69s] [222/225] installing pkgmgr-info-0.0.54-1.2 [ 69s] [223/225] installing ail-devel-0.2.55-1.5 [ 69s] [224/225] installing aul-0.0.240-2.10 [ 69s] warning: group app does not exist - using root [ 69s] warning: group app does not exist - using root [ 69s] Failed to get D-Bus connection: No connection to service manager. [ 69s] Failed to get D-Bus connection: No connection to service manager. [ 69s] Failed to get D-Bus connection: No connection to service manager. [ 69s] warning: %post(aul-0.0.240-2.10.armv7l) scriptlet failed, exit status 1 [ 69s] [225/225] installing aul-devel-0.0.240-2.10 [ 70s] now finalizing build dir... [ 70s] /.build/build: line 2585: mount: command not found [ 70s] /.build/build: line 2586: mount: command not found [ 70s] /.build/build: line 2680: //etc/passwd: No such file or directory [ 73s] build target is armv7l-tizen-linux [ 73s] ----------------------------------------------------------------- [ 73s] I have the following modifications for capi-system-accessory.spec: [ 73s] 4c4 [ 73s] < Release: 1 [ 73s] --- [ 73s] > Release: 3.4 [ 73s] ----------------------------------------------------------------- [ 73s] ----- building capi-system-accessory.spec (user abuild) [ 73s] ----------------------------------------------------------------- [ 73s] ----------------------------------------------------------------- [ 73s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://w09.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory' /home/abuild/rpmbuild/SOURCES/capi-system-accessory.spec [ 73s] Building target platforms: armv7l-tizen-linux [ 73s] Building for target armv7l-tizen-linux [ 73s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.orRii0 [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + LANG=C [ 73s] + export LANG [ 73s] + unset DISPLAY [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + rm -rf capi-system-usb-accessory-0.0.6 [ 73s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-usb-accessory-0.0.6.tar.gz [ 73s] + /bin/tar -xf - [ 73s] + STATUS=0 [ 73s] + '[' 0 -ne 0 ']' [ 73s] + cd capi-system-usb-accessory-0.0.6 [ 73s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 73s] + exit 0 [ 73s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.S9cIB7 [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd capi-system-usb-accessory-0.0.6 [ 73s] + LANG=C [ 73s] + export LANG [ 73s] + unset DISPLAY [ 73s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 73s] + export CFLAGS [ 73s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 73s] + export CXXFLAGS [ 73s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 73s] + export FFLAGS [ 73s] + LD_AS_NEEDED=1 [ 73s] + export LD_AS_NEEDED [ 73s] + cp /home/abuild/rpmbuild/SOURCES/capi-system-usb-accessory.manifest . [ 73s] ++ awk 'BEGIN {FS="."}{print $1}' [ 73s] ++ echo 0.0.6 [ 73s] + MAJORVER=0 [ 73s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.0.6 -DMAJORVER=0 [ 73s] -- The C compiler identification is GNU [ 73s] -- The CXX compiler identification is GNU [ 73s] -- Check for working C compiler: /usr/bin/gcc [ 74s] -- Check for working C compiler: /usr/bin/gcc -- works [ 74s] -- Detecting C compiler ABI info [ 74s] -- Detecting C compiler ABI info - done [ 74s] -- Check for working CXX compiler: /usr/bin/c++ [ 75s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 75s] -- Detecting CXX compiler ABI info [ 75s] -- Detecting CXX compiler ABI info - done [ 75s] -- checking for module 'dlog vconf capi-base-common aul' [ 75s] -- found dlog vconf capi-base-common aul, version 1.0;0.2.29;0.0.1;0.1.0 [ 76s] -- Configuring done [ 76s] -- Generating done [ 76s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-usb-accessory-0.0.6 [ 76s] + make -j4 [ 76s] Scanning dependencies of target capi-system-usb-accessory [ 76s] [100%] [100%] Building C object CMakeFiles/capi-system-usb-accessory.dir/src/usb_accessory_private.c.o [ 76s] Building C object CMakeFiles/capi-system-usb-accessory.dir/src/usb_accessory.c.o [ 77s] Linking C shared library libcapi-system-usb-accessory.so [ 77s] [100%] Built target capi-system-usb-accessory [ 77s] + exit 0 [ 77s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.cCOF2t [ 77s] + umask 022 [ 77s] + cd /home/abuild/rpmbuild/BUILD [ 77s] + cd capi-system-usb-accessory-0.0.6 [ 77s] + LANG=C [ 77s] + export LANG [ 77s] + unset DISPLAY [ 77s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm [ 77s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm [ 77s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm [ 77s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm install [ 77s] [100%] Built target capi-system-usb-accessory [ 77s] Install the project... [ 77s] -- Install configuration: "" [ 77s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/lib/libcapi-system-usb-accessory.so.0.0.6 [ 77s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/lib/libcapi-system-usb-accessory.so.0 [ 77s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/lib/libcapi-system-usb-accessory.so [ 77s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/include/system [ 77s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/include/system/usb_accessory.h [ 77s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/lib/pkgconfig/capi-system-usb-accessory.pc [ 77s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/share/info/dir [ 77s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm -regex '.*\.la$' [ 77s] + xargs rm -f -- [ 77s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm -regex '.*\.a$' [ 77s] + xargs rm -f -- [ 77s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-usb-accessory-0.0.6 [ 78s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm/usr/lib/libcapi-system-usb-accessory.so.0.0.6 [ 78s] symlinked /usr/lib/debug/usr/lib/libcapi-system-usb-accessory.so.0.0.6.debug to /usr/lib/debug/usr/lib/libcapi-system-usb-accessory.so.debug [ 78s] symlinked /usr/lib/debug/usr/lib/libcapi-system-usb-accessory.so.0.0.6.debug to /usr/lib/debug/usr/lib/libcapi-system-usb-accessory.so.0.debug [ 78s] 84 blocks [ 78s] + /usr/lib/rpm/check-buildroot [ 78s] + /usr/lib/rpm//brp-compress [ 78s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 78s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 78s] + /usr/lib/rpm/brp-python-bytecompile [ 78s] + /usr/lib/rpm/brp-python-hardlink [ 78s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm [ 78s] Processing files: capi-system-usb-accessory-0.0.6-3.4.armv7l [ 78s] Aptk: PG1hbmlmZXN0Pgo8cmVxdWVzdD4KCTxkb21haW4gIG5hbWU9Il8iLz4KPC9yZXF1 [ 78s] ZXN0Pgo8L21hbmlmZXN0Pgo= [ 78s] [ 78s] Provides: libcapi-system-usb-accessory.so.0 [ 78s] Requires(interp): /bin/sh /bin/sh [ 78s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 78s] Requires(post): /bin/sh /sbin/ldconfig [ 78s] Requires(postun): /bin/sh /sbin/ldconfig [ 78s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libSLP-db-util.so.0 libail.so.0 libaul.so.0 libbundle.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libicudata.so.48 libicui18n.so.48 libicuuc.so.48 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsqlite3.so.0 libvconf.so.0 libxdgmime.so.1 [ 78s] Processing files: capi-system-usb-accessory-devel-0.0.6-3.4.armv7l [ 78s] Provides: pkgconfig(capi-system-usb-accessory) [ 78s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 78s] Requires: /usr/bin/pkg-config libcapi-system-usb-accessory.so.0 pkgconfig(capi-base-common) [ 78s] Processing files: capi-system-usb-accessory-debuginfo-0.0.6-3.4.armv7l [ 78s] Processing files: capi-system-usb-accessory-debugsource-0.0.6-3.4.armv7l [ 78s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm [ 78s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-usb-accessory-0.0.6-3.4.src.rpm [ 78s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-0.0.6-3.4.armv7l.rpm [ 78s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-devel-0.0.6-3.4.armv7l.rpm [ 78s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-debuginfo-0.0.6-3.4.armv7l.rpm [ 78s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-debugsource-0.0.6-3.4.armv7l.rpm [ 78s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MGNpf1 [ 78s] + umask 022 [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + cd capi-system-usb-accessory-0.0.6 [ 78s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-usb-accessory-0.0.6-3.4.arm [ 78s] + exit 0 [ 78s] ... checking for files with abuild user/group [ 78s] ... creating baselibs [ 79s] ... comparing built packages with the former built [ 79s] /usr/lib/build/rpm-check.sh [ 79s] compare /.build.oldpackages/capi-system-usb-accessory-0.0.6-3.3.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-usb-accessory-0.0.6-3.4.src.rpm [ 79s] compare /.build.oldpackages/capi-system-usb-accessory-0.0.6-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-0.0.6-3.4.armv7l.rpm [ 79s] --- /tmp/tmp.8eIRTX7YWR 2013-10-10 22:45:26.941375846 +0000 [ 79s] +++ /tmp/tmp.VOrzobGoRw 2013-10-10 22:45:26.953375846 +0000 [ 79s] @@ -1,7 +1,7 @@ [ 79s] capi-system-usb-accessory 0.0.6 (none) [ 79s] A usb accessory library in TIZEN C API [ 79s] [ 79s] - tizen Tizen:2.0:Panda obs://w04.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] + tizen Tizen:2.0:Panda obs://w09.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] framework-api (none) (none) (none) (none) [ 79s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 79s] cpio gzip 9 [ 79s] RPM meta information is different [ 79s] compare /.build.oldpackages/capi-system-usb-accessory-debuginfo-0.0.6-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-debuginfo-0.0.6-3.4.armv7l.rpm [ 79s] --- /tmp/tmp.NYxHLXb5rv 2013-10-10 22:45:26.997375847 +0000 [ 79s] +++ /tmp/tmp.acJ5USwFaO 2013-10-10 22:45:27.009375847 +0000 [ 79s] @@ -3,7 +3,7 @@ [ 79s] This package provides debug information for package capi-system-usb-accessory. [ 79s] Debug information is useful when developing applications that use this [ 79s] package or when debugging this package. [ 79s] - tizen Tizen:2.0:Panda obs://w04.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] + tizen Tizen:2.0:Panda obs://w09.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] Development/Debug (none) (none) (none) (none) [ 79s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 79s] cpio gzip 9 [ 79s] RPM meta information is different [ 79s] compare /.build.oldpackages/capi-system-usb-accessory-debugsource-0.0.6-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-debugsource-0.0.6-3.4.armv7l.rpm [ 79s] --- /tmp/tmp.ZYAyqVeb7K 2013-10-10 22:45:27.053375847 +0000 [ 79s] +++ /tmp/tmp.0ec0CX2nei 2013-10-10 22:45:27.065375846 +0000 [ 79s] @@ -3,7 +3,7 @@ [ 79s] This package provides debug sources for package capi-system-usb-accessory. [ 79s] Debug sources are useful when developing applications that use this [ 79s] package or when debugging this package. [ 79s] - tizen Tizen:2.0:Panda obs://w04.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] + tizen Tizen:2.0:Panda obs://w09.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] Development/Debug (none) (none) (none) (none) [ 79s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 79s] cpio gzip 9 [ 79s] RPM meta information is different [ 79s] compare /.build.oldpackages/capi-system-usb-accessory-devel-0.0.6-3.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-devel-0.0.6-3.4.armv7l.rpm [ 79s] --- /tmp/tmp.3C373n8Igd 2013-10-10 22:45:27.117375845 +0000 [ 79s] +++ /tmp/tmp.eMYPlrxf2A 2013-10-10 22:45:27.129375848 +0000 [ 79s] @@ -1,7 +1,7 @@ [ 79s] capi-system-usb-accessory-devel 0.0.6 (none) [ 79s] A accessory library in TIZEN C API (Development) [ 79s] [ 79s] - tizen Tizen:2.0:Panda obs://w04.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] + tizen Tizen:2.0:Panda obs://w09.vlan200.tizen.org/Tizen:2.0:Panda/standard/709af40b837d93711b3d9fed6c6c2714-capi-system-usb-accessory APLv2 APLv2 [ 79s] TO_BE/FILLED_IN (none) (none) (none) (none) [ 79s] (none) 4.9.1 armv7l-tizen-linux-gnueabi [ 79s] cpio gzip 9 [ 79s] RPM meta information is different [ 79s] ... saving built statistics [ 80s] /.build/build: line 3144: mount: command not found [ 80s] ERROR: no root disk device found, yet another new device name? [ 80s] ls: cannot access /sys/block/: No such file or directory [ 80s] umount: /sys: not mounted [ 80s] ... saving built packages [ 80s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-0.0.6-3.4.armv7l.rpm [ 80s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-debuginfo-0.0.6-3.4.armv7l.rpm [ 80s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-debugsource-0.0.6-3.4.armv7l.rpm [ 80s] /home/abuild/rpmbuild/RPMS/armv7l/capi-system-usb-accessory-devel-0.0.6-3.4.armv7l.rpm [ 80s] /home/abuild/rpmbuild/SRPMS/capi-system-usb-accessory-0.0.6-3.4.src.rpm [ 80s] /home/abuild/rpmbuild/OTHER/_statistics [ 80s] [ 80s] w09 finished "build capi-system-accessory.spec" at Thu Oct 10 22:45:27 UTC 2013. [ 80s] [ 81s] /.build/build: line 391: mount: command not found [ 81s] /.build/build: line 368: 305 Killed background_monitor_process [ 83s] Warning: VM doesn't support sysrq and /sbin/halt not installed [ 83s] Warning: clean shut down of the VM didn't work [ 83s] [ 74.943329] Kernel panic - not syncing: Attempted to kill init! [ 83s] [ 74.943811] Pid: 1, comm: qemu-arm Not tainted 3.1.9-1.4-default #1 [ 83s] [ 74.944437] Call Trace: [ 83s] [ 74.944710] [] dump_trace+0x9a/0x270 [ 83s] [ 74.945271] [] dump_stack+0x69/0x6f [ 83s] [ 74.945862] [] panic+0x95/0x1a9 [ 83s] [ 74.946383] [] forget_original_parent+0x244/0x250 [ 83s] [ 74.947119] [] exit_notify+0x10/0x160 [ 83s] [ 74.947699] [] do_exit+0x1dd/0x410 [ 83s] [ 74.948286] [] do_group_exit+0x41/0xb0 [ 83s] [ 74.948847] [] sys_exit_group+0x12/0x20 [ 83s] [ 74.949445] [] system_call_fastpath+0x16/0x1b [ 83s] [ 74.950115] [<00000000601208d9>] 0x601208d8 [ 93s] [ 74.950792] Rebooting in 1 seconds..build: extracting built packages... [ 93s] capi-system-usb-accessory-0.0.6-3.4.armv7l.rpm [ 93s] capi-system-usb-accessory-debuginfo-0.0.6-3.4.armv7l.rpm [ 93s] capi-system-usb-accessory-debugsource-0.0.6-3.4.armv7l.rpm [ 93s] capi-system-usb-accessory-devel-0.0.6-3.4.armv7l.rpm [ 93s] capi-system-usb-accessory-0.0.6-3.4.src.rpm [ 93s] _statistics